CISCO-SERVICE-CONTROLLER-MIB

File: CISCO-SERVICE-CONTROLLER-MIB.mib (20278 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF ENTITY-MIB
SNMP-FRAMEWORK-MIB CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Gauge32 MODULE-COMPLIANCE OBJECT-GROUP
entPhysicalIndex SnmpAdminString ciscoMgmt

Defined Types

CscGlobalControllersEntry  
SEQUENCE    
  cscGlobalControllersIndex Unsigned32
  cscGlobalControllersId Unsigned32
  cscGlobalControllersDescription SnmpAdminString
  cscGlobalControllersBandwidthUnits INTEGER
  cscGlobalControllersBandwidth Unsigned32
  cscGlobalControllersUtilization Unsigned32

CscAggregativeGlobalControllersEntry  
SEQUENCE    
  cscAggregativeGlobalControllersSide INTEGER
  cscAggregativeGlobalControllersAgcId Unsigned32
  cscAggregativeGlobalControllersLimit Gauge32
  cscAggregativeGlobalControllersRate Gauge32

CscAggregativeGlobalControllersLinkEntry  
SEQUENCE    
  cscAggregativeGlobalControllersLinkIndex Unsigned32
  cscAggregativeGlobalControllersLinkSide INTEGER
  cscAggregativeGlobalControllersLinkAgcId Unsigned32
  cscAggregativeGlobalControllersLinkEnforcedRate Gauge32
  cscAggregativeGlobalControllersCommittedInformationRate Gauge32
  cscAggregativeGlobalControllersPeakInformationRate Gauge32
  cscAggregativeGlobalControllersAssuranceLevel Unsigned32

Defined Values

ciscoServiceControllerMIB 1.3.6.1.4.1.9.9.667
This MIB module defines objects describing traffic controllers used by a service control entity. A service control entity is a network device which monitors and controls traffic. The service control enitity is used as a platform for different service control applications which may perform monitoring operations beyond packet counting and delve deeper into the contents of network traffic, such as deep packet inspection. It provides programmable stateful inspection of bidirectional traffic flows, maps these flows to users or subscribers, and can control traffic flow according to different attributes. A service control entity traffic controller can act as a rather simple policer or implement more complicated logic in controlling traffic, up to actual applicative attributes of the traffic itself. The global service controller is a controller component implemented by the service control entity, which acts as a rather simple policer for traffic transiting through the service control entity. A global service controller may be configured per service control entity interface with a configurable bandwidth limitation. The controller is responsible for the enforcement of the bandwith limitation configured in the service control entity. Aggregative global controller is a mechanism that allows dynamic bandwidth allocation between two global controllers that reside on the same direction of two links. Regularly, a global controller is configured per physical port. When aggregative global controller is configured, the relevant per-port global controllers are configured dynamically and automatically by the aggregative global controller mechanism. Primary bandwidth controller controls the total of subscriber traffic and manage the number of bandwidth controller. Its main properties are committed information rate, peak information rate, and relative priority.
MODULE-IDENTITY    

ciscoServiceControlMIBObjects 1.3.6.1.4.1.9.9.667.0
OBJECT IDENTIFIER    

ciscoServiceControlMIBConform 1.3.6.1.4.1.9.9.667.1
OBJECT IDENTIFIER    

cscGlobalControllersTable 1.3.6.1.4.1.9.9.667.0.1
This table contains data for each global service controller in the service control entity. The table has an expansion dependent relationship on the entPhysicalTable, containing zero or more rows for each physical entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CscGlobalControllersEntry

cscGlobalControllersEntry 1.3.6.1.4.1.9.9.667.0.1.1
This entry contains the operational data for the global service controller associated with the service control entity identified by its assigned entPhysicalIndex. Each entry uniquely identifies a global controller by its index. The
Status: current Access: not-accessible
OBJECT-TYPE    
  CscGlobalControllersEntry  

cscGlobalControllersIndex 1.3.6.1.4.1.9.9.667.0.1.1.1
This object indicates an arbitrary integer-value that uniquely identifies a global service controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967295  

cscGlobalControllersId 1.3.6.1.4.1.9.9.667.0.1.1.2
This object indicates the unique id assigned to this global controller by the service control entity.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

cscGlobalControllersDescription 1.3.6.1.4.1.9.9.667.0.1.1.3
This object indicates a human readable string which is the name associated with this global service controller.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(1..255)  

cscGlobalControllersBandwidthUnits 1.3.6.1.4.1.9.9.667.0.1.1.4
An enumerated value which identifies the units for cscGlobalControllersBandwidth value, such as 'kbps' (kilobit per second), 'mbps' (megabit per second), etc.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER kbps(1), mbps(2)  

cscGlobalControllersBandwidth 1.3.6.1.4.1.9.9.667.0.1.1.5
This object indicates the bandwidth limitation for this global controller to enforce. The units of cscGlobalControllersBandwidth are indicated by the value of cscGlobalControllersBandwidthUnits.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

cscGlobalControllersUtilization 1.3.6.1.4.1.9.9.667.0.1.1.6
This object specifies the percentage of utilized bandwidth of the controller out of the configured bandwidth limitation by the cscGlobalControllersBandwidth. For example, if cscGlobalControllersBandwidth = 1000 kbps and cscGlobalControllersUtilization = 65%, then the current utilization of this controller is 650 kbps.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

cscAggregativeGlobalControllersTable 1.3.6.1.4.1.9.9.667.0.2
This table lists the aggregative global controller associated with the service controller entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CscAggregativeGlobalControllersEntry

cscAggregativeGlobalControllersEntry 1.3.6.1.4.1.9.9.667.0.2.1
This entry contains the operational data for the aggregative global controller associated with the service control entity. Each entry uniquely identifies an aggregative global controller by its indices.
Status: current Access: not-accessible
OBJECT-TYPE    
  CscAggregativeGlobalControllersEntry  

cscAggregativeGlobalControllersSide 1.3.6.1.4.1.9.9.667.0.2.1.1
This object indicates the direction of flow (subscriber side or network side).
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER subscriber(1), network(2)  

cscAggregativeGlobalControllersAgcId 1.3.6.1.4.1.9.9.667.0.2.1.2
This object indicates an arbitrary integer-value that uniquely identifies an aggregative global controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4096  

cscAggregativeGlobalControllersLimit 1.3.6.1.4.1.9.9.667.0.2.1.3
This object specifies the bandwidth limit of an aggregative global controller.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

cscAggregativeGlobalControllersRate 1.3.6.1.4.1.9.9.667.0.2.1.4
This object specifies the bandwidth rate of an aggregative global controller.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

cscAggregativeGlobalControllersLinkTable 1.3.6.1.4.1.9.9.667.0.3
This table provides information regarding the aggregative global controller related configuration per link.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CscAggregativeGlobalControllersLinkEntry

cscAggregativeGlobalControllersLinkEntry 1.3.6.1.4.1.9.9.667.0.3.1
This entry contains the operational data for the aggregative global controller associated with the service control entity identified by its assigned link number. Each entry uniquely identifies an aggregative global controller by its indices. The link on a service control engine joins subscriber side to network side.
Status: current Access: not-accessible
OBJECT-TYPE    
  CscAggregativeGlobalControllersLinkEntry  

cscAggregativeGlobalControllersLinkIndex 1.3.6.1.4.1.9.9.667.0.3.1.1
This object indicates an arbitrary integer-value that uniquely identifies a link.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..100  

cscAggregativeGlobalControllersLinkSide 1.3.6.1.4.1.9.9.667.0.3.1.2
This object indicates the direction of flow (subscriber side or network side).
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER subscriber(1), network(2)  

cscAggregativeGlobalControllersLinkAgcId 1.3.6.1.4.1.9.9.667.0.3.1.3
This object indicates an arbitrary integer-value that uniquely identifies an aggregative global controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4096  

cscAggregativeGlobalControllersLinkEnforcedRate 1.3.6.1.4.1.9.9.667.0.3.1.4
This object specifies the enforced rate which is the rate that each bandwidth controller, primary bandwidth controller seek to attain, taking into account external constraints. The types of external constraint are global controller, physical port, primary bandwidth controller.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

cscAggregativeGlobalControllersCommittedInformationRate 1.3.6.1.4.1.9.9.667.0.3.1.5
This object specifies the committed information rate which is the aggregate rate that the bandwidth controller is committed to supply to its controlled flows. In all cases, the system will do its utmost to ensure that committed rate is not harmed. This cannot be guaranteed in cases of oversubscription of committed rate in the system as a whole.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

cscAggregativeGlobalControllersPeakInformationRate 1.3.6.1.4.1.9.9.667.0.3.1.6
This object specifies peak information rate which is the peak aggregate rate of the controlled flows. Aggregate rate means the total bandwidth of all controlled flows.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

cscAggregativeGlobalControllersAssuranceLevel 1.3.6.1.4.1.9.9.667.0.3.1.7
This object specifies assurance level which is the bandwidth controller strength in the competition over bandwidth in case of congestion. Assured level controls how fast Enforced rate would decrease from peak information rate to committed information rate as congestion builds, or increase from committed information rate to peak information rate as congestion decreases. A higher assured level ensures a higher enforced rate compared to a similar bandwidth controller with a lower assured level.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

ciscoServiceControlMIBCompliances 1.3.6.1.4.1.9.9.667.1.1
OBJECT IDENTIFIER    

ciscoServiceControlMIBObjectGroups 1.3.6.1.4.1.9.9.667.1.2
OBJECT IDENTIFIER    

ciscoServiceControlMIBCompliance 1.3.6.1.4.1.9.9.667.1.1.1
The compliance statement for SNMP entities that implement version 1 of the Cisco Service Controller MIB.
Status: deprecated Access: read-write
MODULE-COMPLIANCE    

ciscoServiceControlMIBComplianceRev1 1.3.6.1.4.1.9.9.667.1.1.2
This compliance statement specifies the minimal requirements an implementation must meet in order to claim full compliance with the definition of the CISCO-SERVICE-CONTROLLER-MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

ciscoServiceControlMIBGlobalControllersObjectGroup 1.3.6.1.4.1.9.9.667.1.2.1
This group is a collection of objects that describes the global controllers statistics for service control entity.
Status: current Access: read-only
OBJECT-GROUP    

ciscoServiceControlAGCMIBObjectGroups 1.3.6.1.4.1.9.9.667.1.2.2
This group is a collection of objects that describes the aggregative global controller for service control entity.
Status: current Access: read-only
OBJECT-GROUP