CISCO-SNMP-HANDSHAKE-MIB

File: CISCO-SNMP-HANDSHAKE-MIB.mib (6522 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF AIRESPACE-WIRELESS-MIB
SNMPv2-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP bsnWireless TruthValue

Defined Values

ciscoSnmpHandshakeMIB 1.3.6.1.4.1.14179.2.40
This MIB is intended for those devices where SNMP access is given to be given to known SNMP Manager only. All the SNMP MIBs are published, any thrid party SNMP browser can retrieve data using SNMP protocol. By implementing this MIB, a application layer handshake has to be done before any MIB view access is granted to SNMPV2c community string or SNMPV3 user. Once the handshake is successfully over then SNMP agent can create VACM entry to provide access to any MIB view. GLOSSARY View-based Access Control Model ( VACM ) The VACM determines whether access to a managed object in a local MIB by a remote SNMP manager should be allowed.
MODULE-IDENTITY    

ciscoSnmpHandshakeMIBNotifs 1.3.6.1.4.1.14179.2.40.0
OBJECT IDENTIFIER    

ciscoSnmpHandshakeMIBObjects 1.3.6.1.4.1.14179.2.40.1
OBJECT IDENTIFIER    

ciscoSnmpHandshakeMIBConform 1.3.6.1.4.1.14179.2.40.2
OBJECT IDENTIFIER    

ciscoSnmpHandshakeProcess 1.3.6.1.4.1.14179.2.40.1.1
OBJECT IDENTIFIER    

ciscoSnmpHandshakeTest 1.3.6.1.4.1.14179.2.40.1.2
OBJECT IDENTIFIER    

csHandshakeInit 1.3.6.1.4.1.14179.2.40.1.1.1
Get on this object will return random 16 bytes octet-string. Device will cache this string against IP-Address of sender. This string will be later used to comeplete the handshake.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(16)  

csHandshakeUpdate 1.3.6.1.4.1.14179.2.40.1.1.2
Set on this object will make snmp agent to run the secret algorithm to give access or deny access to SNMP manager. Access will be given to the community string used and to the sender's IP-Address only.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(16)  

csHandshakeCheck 1.3.6.1.4.1.14179.2.40.1.2.1
This object can be use to perform test of MIB view access. Once the handshake is successfully completed. The MIB-view access will be granted for this object, If MIB-view is not granted yet for this object then no-access error will be returned.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

ciscoSnmpHandshakeMIBCompliances 1.3.6.1.4.1.14179.2.40.2.1
OBJECT IDENTIFIER    

ciscoSnmpHandshakeMIBGroups 1.3.6.1.4.1.14179.2.40.2.2
OBJECT IDENTIFIER    

ciscoSnmpHandshakeMIBCompliance 1.3.6.1.4.1.14179.2.40.2.1.1
The compliance statement for the SNMP entities that implement the ciscoSnmpHandshakeMIB module.
Status: current Access: read-only
MODULE-COMPLIANCE    

ciscoSnmpHandshakeGroup 1.3.6.1.4.1.14179.2.40.2.2.1
This collection of objects represents the information about attributes needed to completed SNMP handhshake
Status: current Access: read-only
OBJECT-GROUP