CISCO-SYSTEM-EXT-MIB
File:
CISCO-SYSTEM-EXT-MIB.mib (49559 bytes)
Imported modules
Imported symbols
Defined Types
| CseHaRestartReason |
|
| Reason codes for the restart of a service.
unknown (1) - ungraceful exit
ungracefulExit (2) - ungraceful exit
otherSignal (3) - service got some other signal
sigterm (4) - received SIGTERM
softwareUpgrade (5) - software upgrade
configUpdate (6) - config update
configRemove (7) - config removal
shutdown (8) - manually shutdown
aborted (9) - aborted
heartbeatFailure (10) - heartbeat failure
userTerminate (11) - user termination
gracefulExit (12) - graceful exit
failureNoCallhome (13)- service exited but it
does not want a callhome
message to be generated
serviceTimeout (14) - service timeout |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
unknown(1), ungracefulExit(2), otherSignal(3), sigterm(4), softwareUpgrade(5), configUpdate(6), configRemove(7), shutdown(8), aborted(9), heartbeatFailure(10), userTerminate(11), gracefulExit(12), noCallHomeFailure(13), serviceTimeout(14) |
|
| CiscoMaintModeState |
|
| Maintenance Mode state for the system.
normal (1) - normal operational state
maintenance (2) - maintenance mode operational state
unplannedMaint (3) - unplanned maintenance state |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
normal(1), maintenance(2), unplannedMaint(3) |
|
| CseSnmpErrorEntry |
|
| SEQUENCE |
|
|
|
| |
cseSnmpErrorAddressType |
InetAddressType |
|
| |
cseSnmpErrorAddress |
InetAddress |
|
| |
cseSnmpErrorRequestId |
Unsigned32 |
|
| |
cseSnmpErrorCode |
Unsigned32 |
|
| |
cseSnmpErrorDescription |
SnmpAdminString |
|
| CseSwCoresEntry |
|
| SEQUENCE |
|
|
|
| |
cseSwCoresModule |
EntPhysicalIndexOrZero |
|
| |
cseSwCoresProcName |
SnmpAdminString |
|
| |
cseSwCoresInstance |
Unsigned32 |
|
| |
cseSwCoresPID |
Unsigned32 |
|
| |
cseSwCoresTimeCreated |
DateAndTime |
|
| |
cseSwCoresSlotNum |
Unsigned32 |
|
| |
cseSwCoresFileName |
SnmpAdminString |
|
Defined Values
| ciscoSystemExtMIB |
1.3.6.1.4.1.9.9.305 |
| MIB module for monitoring High Availability, SNMP SET
errors and bandwidths. This mib module also provides the
information on core files that are generated in the
system.
GLOSSARY
FIPS Federal Information Processing Standards Publication. |
| MODULE-IDENTITY |
|
|
|
| ciscoSystemMaintModeGroup |
1.3.6.1.4.1.9.9.305.1.7 |
| OBJECT IDENTIFIER |
|
|
|
| ciscoSystemMaintModeNotifControl |
1.3.6.1.4.1.9.9.305.1.8 |
| OBJECT IDENTIFIER |
|
|
|
| cseSysCPUUtilization |
1.3.6.1.4.1.9.9.305.1.1.1 |
| The average utilization of CPU on the active
supervisor. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
0..100 |
|
| cseSysMemoryUtilization |
1.3.6.1.4.1.9.9.305.1.1.2 |
| The average utilization of memory on the active
supervisor. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
0..100 |
|
| cseSysConfLastChange |
1.3.6.1.4.1.9.9.305.1.1.3 |
| The local date and time when the
configuration was last changed. This object will
be set to zero on power cycle or on reboot of
the system. Also, if the clock is changed on
local system it is set to zero. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DateAndTime |
|
|
| cseSysAutoSync |
1.3.6.1.4.1.9.9.305.1.1.4 |
| The state of the auto synchronization of images
between the active and standby supervisor.
Setting the value to sync when the existing value
is sync, has no effect on the operation. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
sync(1), noSync(2) |
|
| cseSysAutoSyncState |
1.3.6.1.4.1.9.9.305.1.1.5 |
| The status of the current auto synchronization
process, or if no such process is in progress,
then the state of the most recent one. The
value 'notStarted' indicates no auto synchronization
process has occurred recently. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
inProgress(1), succeeded(2), failed(3), notStarted(4) |
|
| cseWriteErase |
1.3.6.1.4.1.9.9.305.1.1.6 |
| This object is used to initiate a write erase on the
device's saved configuration file(s) from which the
device loads its configuration when it restarts.
If the value of this object is set to 'eraseAll', then
all the saved configurations are removed.
No action is taken when the this object is set to
'noOp'.
When read, the value of this object is always 'noOp'. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
noOp(1), eraseAll(2) |
|
| cseSysConsolePortStatus |
1.3.6.1.4.1.9.9.305.1.1.7 |
| This object describes the status of the console
port on this device.
The status 'connected' means that there is
a cable attached to the console port.
The status 'notConnected' means that there is
no connection out of the console port. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
connected(1), notConnected(2) |
|
| cseSysTelnetServiceActivation |
1.3.6.1.4.1.9.9.305.1.1.8 |
| Enables or disables the Telnet service on the
device. In other words, it enables or disables
the telneting to the device. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cseSysFIPSModeActivation |
1.3.6.1.4.1.9.9.305.1.1.9 |
| The object to enable/disable FIPS mode on the device.
FIPS 140-2 is a set of security requirements for cryptographic
modules and it details the U.S. Government requirements for
cryptographic modules.
A module will comprise both hardware and software, eg a
datacenter switching or routing module. The module is said to
be in FIPS enabled mode when a request is recieved to enable the
FIPS mode and a set of self-tests are successfully run in
response to the request. If the self-tests fail, then an
appropriate error is returned. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cseSysUpTime |
1.3.6.1.4.1.9.9.305.1.1.10 |
| The time (in seconds) since the entire system
was last re-initialized as a result of reload. The
initialization being system loaded and running with a system
image software on the first active supervisor (SUP). In High
Availibility (HA) capable system / System that provides
Supervisor module redundancy, this uptime indicates time
elapsed since the first active SUP was booted. This will not
change even if the active SUP goes down and stand-by takes
over as active. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeIntervalSec |
|
|
| cseSnmpErrorTable |
1.3.6.1.4.1.9.9.305.1.2.1 |
| A table containing information about the errors which have
recently caused the generation of a SNMP Response PDU with a
non-zero value in its error-status field for SNMP Set Response
PDU.
This table serves as an extension to the SNMP's error status
when a SNMP Set request fails. SNMP returns only a pre-defined
set of standard error codes which does not convey the specific
cause for an error. Typically, there is an incumbent and
sizable burden on the configuration application to determine
if the configuration request failure is the result of a
resource issue, a security issue, or an application error
(like an object depending on some other objects). So from a
user perspective, it is important that a specific error be
made known.
Ideally, when a 'badValue' error occurs for a given set
request, an application can query the command responder for
more details on the error.
This table provides a framework for the command responders to
provide more information on the SET errors.
It is up to the implementation to create entries in this table
for either only certain SNMP errors or all of the SNMP errors.
Note that only most recent incarnation of an entry is kept in
this table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CseSnmpErrorEntry |
|
| cseSnmpErrorEntry |
1.3.6.1.4.1.9.9.305.1.2.1.1 |
| An entry (conceptual row) in the cseSnmpErrorTable, containing
information about an error which has recently caused a SNMP
SetRequest to fail. An entry is created by the agent
on the occurrence of an error, and is deleted approximately 5
minutes later. The reasons for this are :
- to prevent old entries clogging the table.
- optimal utilization of the resources like memory. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CseSnmpErrorEntry |
|
|
| cseSnmpErrorAddress |
1.3.6.1.4.1.9.9.305.1.2.1.1.2 |
| The address from which the error-ed SetRequest originated. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
InetAddress |
|
|
| cseSnmpErrorRequestId |
1.3.6.1.4.1.9.9.305.1.2.1.1.3 |
| The request-id of the error-ed SetRequest. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| cseSnmpErrorCode |
1.3.6.1.4.1.9.9.305.1.2.1.1.4 |
| The code for the Mib object specific error which
caused a SetRequest to fail.
This error code is platform-specific and for debugging
purposes only. For information on this code, the
corresponding instance of cseSnmpErrorDescription must be
used.
This code is not the same as the value contained
in the error-status field of SNMP Response PDU. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| cseHaRestartReason |
1.3.6.1.4.1.9.9.305.1.3.2 |
| The reason for most recent restart of a service on the
'active' supervisor. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-TYPE |
|
|
|
| |
CseHaRestartReason |
|
|
| cseHaRestartStateless |
1.3.6.1.4.1.9.9.305.1.3.3 |
| Tells if the most recent restart of a service on the
'active' supervisor was 'stateless' or not.
A 'stateless' restart of a service is where no runtime
information is preserved while restarting the service. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cseHaRestartService |
1.3.6.1.4.1.9.9.305.1.3.4 |
| Name of the service (or process) that was restarted on
the 'active' supervisor. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(0..255) |
|
| cseHaShutDownReason |
1.3.6.1.4.1.9.9.305.1.3.6 |
| The description of the reason as to why the system
is going to go down. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(0..255) |
|
| cseSwCorePath |
1.3.6.1.4.1.9.9.305.1.4.1 |
| Provides the path where the software cores are
stored on the system. The management application can
use this path to copy the cores from the system using
CISCO-FLASH-MIB. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(0..255) |
|
| cseSwCoresTable |
1.3.6.1.4.1.9.9.305.1.4.2 |
| A table containing information about the system cores that
have been generated as an effect of some system failures. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CseSwCoresEntry |
|
| cseSwCoresEntry |
1.3.6.1.4.1.9.9.305.1.4.2.1 |
| An entry (conceptual row) in the cseSwCoresTable, containing
information about cores that have been generated. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CseSwCoresEntry |
|
|
| cseSwCoresProcName |
1.3.6.1.4.1.9.9.305.1.4.2.1.2 |
| The name of the process that crashed and generated core. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..64) |
|
| cseSwCoresInstance |
1.3.6.1.4.1.9.9.305.1.4.2.1.3 |
| The instance of the core for a process identified by
cseSwCoresProcName and on the module identified by
cseSwCoresModule.
To uniquely identify a core, the module number and
process name are not sufficient as there could be
multiple cores for the same module number and process
name. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| cseSwCoresPID |
1.3.6.1.4.1.9.9.305.1.4.2.1.4 |
| The process identifier of the process that dumped the
core. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| cseSwCoresSlotNum |
1.3.6.1.4.1.9.9.305.1.4.2.1.6 |
| The slot number corresponding to the cseSwCoresModule
in this chassis. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| cseSwCoresFileName |
1.3.6.1.4.1.9.9.305.1.4.2.1.7 |
| This object contains the core file-name(including the
path, relative to the value in the cseSwCorePath object).
If the cseSwCorePath contains zero length octet string,
then this object will contain the filename with absolute
path. If this object contains zero length octet string,
then the core file is available in path identified in
cseSwCorePath. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
|
|
| ciscoSystemSwitchingModeAdmin |
1.3.6.1.4.1.9.9.305.1.6.1 |
| Object to specify system's switching mode.
'other' - any other state not covered by below enumerations
'notApplicable' - switching mode configuration is not applicable
for this system
'nexus3000' - system switching mode is configured as Nexus 3000
'nexus9000' - system switching mode is configured as Nexus 9000. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), notApplicable(2), nexus3000(3), nexus9000(4) |
|
| ciscoSystemSwitchingModeOper |
1.3.6.1.4.1.9.9.305.1.6.2 |
| Object indicate system's operational switching mode.
'other' - any other state not covered by below enumerations
'notApplicable' - switching mode configuration is not applicable
for this system
'nexus3000' - system is opeerating in Nexus 3000 mode
'nexus9000' - system is opeerating in Nexus 9000 mode. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), notApplicable(2), nexus3000(3), nexus9000(4) |
|
| cseMaintModeState |
1.3.6.1.4.1.9.9.305.1.7.1 |
| The maintenance mode operational state for the system. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
CiscoMaintModeState |
|
|
| cseSystemReloadPending |
1.3.6.1.4.1.9.9.305.1.9.1 |
| This object is used to indicate if a system reload is needed to
make feature configuration change effective.
The object returns 'true' if a system reload is required; it returns
'false' if no system reload is required. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| ciscoSwFailureNotifEnable |
1.3.6.1.4.1.9.9.305.1.5.1 |
| This object is used for administratively
enabling/disabling the cseFailSwCoreNotify or
cseFailSwCoreNotifyExtended notifications. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| ciscoSystemMaintModeNotifEnable |
1.3.6.1.4.1.9.9.305.1.8.2 |
| This object is used for administratively
enabling/disabling the cseMaintModeChangeNotify. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cseHaRestartNotify |
1.3.6.1.4.1.9.9.305.1.3.5.0.1 |
| A service restart notification is generated
whenever a service (or a process) on the 'active'
supervisor is restarted. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| cseShutDownNotify |
1.3.6.1.4.1.9.9.305.1.3.5.0.2 |
| A system shutdown notification is generated
whenever a system is going to shut down. The
cseHaShutDownReason, describes the reason as to
why the system is going to go down. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| cseFailSwCoreNotify |
1.3.6.1.4.1.9.9.305.1.4.3.0.1 |
| A notification is generated whenever a software
crash occurs and a core file is generated. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| cseFailSwCoreNotifyExtended |
1.3.6.1.4.1.9.9.305.1.4.3.0.2 |
| A notification is generated whenever a software
crash occurs and a core file is generated. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| cseMaintModeNotification |
1.3.6.1.4.1.9.9.305.1.7.2 |
| OBJECT IDENTIFIER |
|
|
|
| cseMaintModeNotificationPrefix |
1.3.6.1.4.1.9.9.305.1.7.2.0 |
| OBJECT IDENTIFIER |
|
|
|
| cseNormalModeChangeNotify |
1.3.6.1.4.1.9.9.305.1.7.2.0.1 |
| A normal mode state change is generated when the system
is changed from maintenance mode to normal mode. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| cseMaintModeChangeNotify |
1.3.6.1.4.1.9.9.305.1.7.2.0.2 |
| A maintenance mode state change is generated when the system
is changed from normal mode to maintenance mode. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| ciscoSystemExtMIBCompliance |
1.3.6.1.4.1.9.9.305.2.1.1 |
| The compliance statement for entities which
implement the CISCO-SYTEM-EXT-MIB. |
| Status: deprecated |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| ciscoSystemExtMIBComplianceRev1 |
1.3.6.1.4.1.9.9.305.2.1.2 |
| The compliance statement for entities which
implement the CISCO-SYTEM-EXT-MIB. |
| Status: deprecated |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| ciscoSystemExtMIBComplianceRev2 |
1.3.6.1.4.1.9.9.305.2.1.3 |
| The compliance statement for entities which
implement the CISCO-SYTEM-EXT-MIB. |
| Status: deprecated |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| ciscoSystemExtMIBComplianceRev3 |
1.3.6.1.4.1.9.9.305.2.1.4 |
| The compliance statement for entities which
implement the CISCO-SYTEM-EXT-MIB. |
| Status: deprecated |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| ciscoSystemExtMIBComplianceRev4 |
1.3.6.1.4.1.9.9.305.2.1.5 |
| The compliance statement for entities which
implement the CISCO-SYTEM-EXT-MIB. |
| Status: deprecated |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| ciscoSystemExtMIBComplianceRev5 |
1.3.6.1.4.1.9.9.305.2.1.6 |
| The compliance statement for entities which
implement the CISCO-SYTEM-EXT-MIB. |
| Status: deprecated |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| ciscoSystemExtMIBComplianceRev6 |
1.3.6.1.4.1.9.9.305.2.1.7 |
| The compliance statement for entities which implement the
CISCO-SYTEM-EXT-MIB. |
| Status: deprecated |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| ciscoSystemExtMIBComplianceRev7 |
1.3.6.1.4.1.9.9.305.2.1.8 |
| The compliance statement for entities which
implement the CISCO-SYTEM-EXT-MIB. |
| Status: deprecated |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| ciscoSystemExtMIBComplianceRev8 |
1.3.6.1.4.1.9.9.305.2.1.9 |
| The compliance statement for entities which
implement the CISCO-SYTEM-EXT-MIB. |
| Status: deprecated |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| ciscoSystemExtMIBComplianceRev9 |
1.3.6.1.4.1.9.9.305.2.1.11 |
| The compliance statement for entities which
implement the CISCO-SYTEM-EXT-MIB. |
| Status: deprecated |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| ciscoSystemExtMIBComplianceRev10 |
1.3.6.1.4.1.9.9.305.2.1.12 |
| The compliance statement for entities which
implement the CISCO-SYTEM-EXT-MIB. |
| Status: current |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| ciscoSystemExtInfoGroup |
1.3.6.1.4.1.9.9.305.2.2.1 |
| A collection of objects for system information.
ciscoSystemExtInfoGroup object is superseded by ciscoSystemExtInfoGroupRev1. |
| Status: deprecated |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSystemExtErrorGroup |
1.3.6.1.4.1.9.9.305.2.2.2 |
| A collection of objects for logging SNMP set error. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSystemExtHaGroup |
1.3.6.1.4.1.9.9.305.2.2.3 |
| A collection of objects for High Availability. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSystemExtNotificationGroup |
1.3.6.1.4.1.9.9.305.2.2.4 |
| A collection of notifications for the
High Availability. |
| Status: current |
Access: read-write |
| NOTIFICATION-GROUP |
|
|
|
| ciscoSystemExtInfoGroupRev1 |
1.3.6.1.4.1.9.9.305.2.2.5 |
| A collection of objects for system information.
ciscoSystemExtInfoGroupRev1 object is superseded by ciscoSystemExtInfoGroupRev3. |
| Status: deprecated |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSystemExtInfoGroupOptional |
1.3.6.1.4.1.9.9.305.2.2.6 |
| A collection of objects for system information
which are optional. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSystemExtSwFailureGroup |
1.3.6.1.4.1.9.9.305.2.2.7 |
| A collection of objects for system software failure
information which are optional. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSystemExtInfoGroupRev2 |
1.3.6.1.4.1.9.9.305.2.2.8 |
| A collection of objects for system information. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSystemExtSwFailureGroup2 |
1.3.6.1.4.1.9.9.305.2.2.9 |
| A collection of objects for system software failure
information which are optional. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSystemExtHaGroupRev1 |
1.3.6.1.4.1.9.9.305.2.2.11 |
| A collection of objects for High Availability. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSystemExtInfoTelnetGroup |
1.3.6.1.4.1.9.9.305.2.2.12 |
| A collection of objects related to telnet support
to the device. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSystemExtNotificationGroupSup2 |
1.3.6.1.4.1.9.9.305.2.2.13 |
| A collection of notification related to core file
creation. |
| Status: current |
Access: read-write |
| NOTIFICATION-GROUP |
|
|
|
| ciscoSystemExtSwFailureGroup3 |
1.3.6.1.4.1.9.9.305.2.2.14 |
| A collection of objects related to the core file. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSystemExtSwFailureControlGroup |
1.3.6.1.4.1.9.9.305.2.2.15 |
| This group of objects controls the sending of
notifications defined in this MIB module. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSystemExtInfoFIPSGroup |
1.3.6.1.4.1.9.9.305.2.2.16 |
| A collection of objects related to FIPS support
to the device. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSystemExtInfoGroupRev3 |
1.3.6.1.4.1.9.9.305.2.2.17 |
| A collection of objects for system information. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSystemMaintModeObjectsGroup |
1.3.6.1.4.1.9.9.305.2.2.19 |
| A collection of objects to support Maint mode state feature. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSystemMaintModeNotificationGroup |
1.3.6.1.4.1.9.9.305.2.2.20 |
| A collection of notification related to core file
creation. |
| Status: current |
Access: read-write |
| NOTIFICATION-GROUP |
|
|
|
| ciscoSystemReloadObjectsGroup |
1.3.6.1.4.1.9.9.305.2.2.21 |
| A collection of objects to support system reload. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|