CISCO-TCP-METRICS-MIB

File: CISCO-TCP-METRICS-MIB.mib (11829 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
CISCO-FLOW-MONITOR-MIB CISCO-FLOW-MONITOR-TC-MIB CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP TimeStamp cfmFlowMonitorId
cfmFlowId cfmFlowMetricsIntNumber FlowMetricScale
FlowMetricPrecision FlowMetricValue ciscoMgmt

Defined Types

CfmTcpMetricsEntry  
SEQUENCE    
  cfmTcpMetricsValid BITS
  cfmTcpMetricsRoundTripTimeScale FlowMetricScale
  cfmTcpMetricsRoundTripTimePrecision FlowMetricPrecision
  cfmTcpMetricsRoundTripTime FlowMetricValue

CfmTcpMetricsIntEntry  
SEQUENCE    
  cfmTcpMetricsIntValid BITS
  cfmTcpMetricsIntRoundTripTimeScale FlowMetricScale
  cfmTcpMetricsIntRoundTripTimePrecision FlowMetricPrecision
  cfmTcpMetricsIntRoundTripTime FlowMetricValue

Defined Values

ciscoTcpMetricsMIB 1.3.6.1.4.1.9.9.770
This MIB module defines objects that describe the quality metrics of TCP streams. GLOSSARY ============ Flow Monitor - a hardware or software entity that classifies traffic flows, collects flow data, and periodically computes flow metrics. Flow Metric - a measurement that reflects the quality of a traffic flow. Measurement Interval - the length of time over which a flow monitor collects data related to a traffic flow, after which the flow monitor computes flow metrics using the collected data. Traffic Flow - a unidirectional stream of packets conforming to a classifier. For example, packets having a particular source IP address, destination IP address, protocol type, source port number, and destination port number. Traffic Flow Stream - when the monitor identifies multiple individual traffic flows based on the flow classificiation, the monitor aggregates the flows and represents them as a single entry in the cfmFlowTable. The individual traffic flows contributing to the metrics are called as individual traffic flow stream. The metrics for the traffic flow with multiple streams contributing, are determined either by aggregating metrics of all individual streams, for example, cumulative bit rate is computed by cumulative bits of all streams divided by total duration, or by selecting the metric for one of the individual stream, for example, maximum bit rate of an individual stream.
MODULE-IDENTITY    

ciscoTcpMetricsMIBNotifs 1.3.6.1.4.1.9.9.770.0
OBJECT IDENTIFIER    

ciscoTcpMetricsMIBObjects 1.3.6.1.4.1.9.9.770.1
OBJECT IDENTIFIER    

ciscoTcpMetricsMIBConform 1.3.6.1.4.1.9.9.770.2
OBJECT IDENTIFIER    

ciscoTcpMetricsMIBIds 1.3.6.1.4.1.9.9.770.3
OBJECT IDENTIFIER    

ciscoTcpMetricsMIBCompliances 1.3.6.1.4.1.9.9.770.2.1
OBJECT IDENTIFIER    

cfmTcpMetrics 1.3.6.1.4.1.9.9.770.1.1
OBJECT IDENTIFIER    

cfmTcpMetricsTable 1.3.6.1.4.1.9.9.770.1.1.1
This table contains aggregate data maintained by a flow monitor for traffic flows for which it is computing TCP metrics. This table has an sparse dependent relationship on the cfmFlowMetricsTable (defined by the CISCO-FLOW-MONITOR-MIB), containing a row for each row in the cfmFlowMetricsTable having a corresponding instance of cfmFlowMetricsCollected with the 'tcp' bit set to one.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CfmTcpMetricsEntry

cfmTcpMetricsEntry 1.3.6.1.4.1.9.9.770.1.1.1.1
An entry describes cumulative and aggregate TCP metrics for a single traffic flow. The devices creates a row in the cfmTcpMetricsTable when a flow monitor starts monitoring a traffic flow and has been configured to compute TCP metrics for the same traffic flow. Likewise, the device destroys a row in the cfmTcpMetricsTable when the corresponding flow monitor has ceased monitoring the traffic flow (e.g., when a traffic flow has timed out).
Status: current Access: not-accessible
OBJECT-TYPE    
  CfmTcpMetricsEntry  

cfmTcpMetricsValid 1.3.6.1.4.1.9.9.770.1.1.1.1.1
This object indicates which metrics are valid for the traffic flow: 'roundTripTime' If this bit is set to '1', then the corresponding instances of cfmTcpMetricsRoundTripTimeScale, cfmTcpMetricsRoundTripTimePrecision, and cfmTcpMetricsRoundTripTime are valid.
Status: current Access: read-only
OBJECT-TYPE    
  BITS roundTripTime(0)  

cfmTcpMetricsRoundTripTimeScale 1.3.6.1.4.1.9.9.770.1.1.1.1.2
This object indicates the scaling factor for the corresponding instance of cfmTcpMetricsRoundTripTime.
Status: current Access: read-only
OBJECT-TYPE    
  FlowMetricScale  

cfmTcpMetricsRoundTripTimePrecision 1.3.6.1.4.1.9.9.770.1.1.1.1.3
This object indicates the precision for the corresponding instance of cfmFlowMetricsRoundTripTime.
Status: current Access: read-only
OBJECT-TYPE    
  FlowMetricPrecision  

cfmTcpMetricsRoundTripTime 1.3.6.1.4.1.9.9.770.1.1.1.1.4
This object indicates the round trip time for the packet observed by the flow monitor for the corresponding flow. The round trip time is defined as the length of time it takes for a TCP segment transmission and receipt of acknowledgement.
Status: current Access: read-only
OBJECT-TYPE    
  FlowMetricValue  

cfmTcpMetricsTableChanged 1.3.6.1.4.1.9.9.770.1.1.2
This object indicates the value of sysUpTime the last time the device created/destroyed a row in the cfmTcpMetricsTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

cfmTcpMetricsIntTable 1.3.6.1.4.1.9.9.770.1.1.3
This table contains historic TCP metrics for the traffic flows monitored by each of the flow monitors supported by the device. This table has an sparse dependent relationship on the cfmFlowMetricsIntTable (defined by the CISCO-FLOW-MONITOR-MIB), containing a row for each row in the cfmFlowMetricsIntTable having a corresponding instance of cfmFlowMetricsCollected with the 'tcp' bit set to one.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CfmTcpMetricsIntEntry

cfmTcpMetricsIntEntry 1.3.6.1.4.1.9.9.770.1.1.3.1
An entry describes TCP metrics collected for a previous measurement interval for a corresponding traffic flow.
Status: current Access: not-accessible
OBJECT-TYPE    
  CfmTcpMetricsIntEntry  

cfmTcpMetricsIntValid 1.3.6.1.4.1.9.9.770.1.1.3.1.1
This object indicates which metrics are valid for the measurement interval: 'roundTripTime' If this bit is set to '1', then the corresponding instances of cfmTcpMetricsIntRoundTripTimeScale, cfmTcpMetricsIntRoundTripTimePrecision, and cfmTcpMetricsIntRoundTripTime are valid.
Status: current Access: read-only
OBJECT-TYPE    
  BITS roundTripTime(0)  

cfmTcpMetricsIntRoundTripTimeScale 1.3.6.1.4.1.9.9.770.1.1.3.1.2
This object indicates the scaling factor for the corresponding instance of cfmTcpMetricsIntRoundTripTime.
Status: current Access: read-only
OBJECT-TYPE    
  FlowMetricScale  

cfmTcpMetricsIntRoundTripTimePrecision 1.3.6.1.4.1.9.9.770.1.1.3.1.3
This object indicates the precision for the corresponding instance of cfmFlowMetricsIntRoundTripTime.
Status: current Access: read-only
OBJECT-TYPE    
  FlowMetricPrecision  

cfmTcpMetricsIntRoundTripTime 1.3.6.1.4.1.9.9.770.1.1.3.1.4
This object indicates the round trip time for traffic flow during the measurement interval.
Status: current Access: read-only
OBJECT-TYPE    
  FlowMetricValue  

ciscoTcpMetricsMIBGroups 1.3.6.1.4.1.9.9.770.2.2
OBJECT IDENTIFIER    

ciscoTcpMetricsMIBCompliance01 1.3.6.1.4.1.9.9.770.2.1.1
This compliance statement specifies the minimal requirements an implementation must meet in order to claim full compliance with the definition of the CISCO-TCP-METRICS-MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

ciscoTcpMetricsGroup 1.3.6.1.4.1.9.9.770.2.2.1
This group contains objects that describe TCP metrics.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor