CISCO-TCPOFFLOAD-MIB

File: CISCO-TCPOFFLOAD-MIB.mib (9449 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
CISCO-SMI	CISCO-CHANNEL-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	IpAddress
MODULE-COMPLIANCE	OBJECT-GROUP	DisplayString
RowStatus	TruthValue	ciscoMgmt
cipCardEntryIndex	cipCardDtrBrdIndex	cipCardSubChannelIndex

Defined Types

CipCardOffloadConfigEntry
SEQUENCE
	cipCardOffloadConfigPath	OCTET STRING	Size(2)
	cipCardOffloadConfigDevice	OCTET STRING	Size(2)
	cipCardOffloadConfigIpAddr	IpAddress
	cipCardOffloadConfigHostName	DisplayString	Size(1..10)
	cipCardOffloadConfigRouterName	DisplayString	Size(1..10)
	cipCardOffloadConfigLinkHostAppl	DisplayString	Size(1..10)
	cipCardOffloadConfigLinkRouterAppl	DisplayString	Size(1..10)
	cipCardOffloadConfigAPIHostAppl	DisplayString	Size(1..10)
	cipCardOffloadConfigAPIRouterAppl	DisplayString	Size(1..10)
	cipCardOffloadConfigBroadcastEnable	TruthValue
	cipCardOffloadConfigRowStatus	RowStatus

Defined Values

ciscoTcpOffloadMIB		1.3.6.1.4.1.9.9.31
This is the MIB module for objects used to manage the cisco tcp offload feature. The IBM mainframe (host) supports TCP/IP. As a way to save cycles on the host, the TCP/IP stack can be run on the 3172. This offloads the host from the protocol processing and is known as TCP-OFFLOAD. This mib identifies the manageable objects for the TCP-OFFLOAD feature in the Cisco router.
MODULE-IDENTITY

tcpOffloadObjects		1.3.6.1.4.1.9.9.31.1
OBJECT IDENTIFIER

cipCardOffloadConfig		1.3.6.1.4.1.9.9.31.1.1
OBJECT IDENTIFIER

cipCardOffloadConfigTable		1.3.6.1.4.1.9.9.31.1.1.1
This table contains configuration information for the TCP offload feature on the CMCC card. Changing these parameters will take effect immediately. The management station can create an entry in this table by setting the appropriate value in cipCardOffloadConfigRowStatus. All the objects in this table must be supplied for a successful create/set.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CipCardOffloadConfigEntry

cipCardOffloadConfigEntry		1.3.6.1.4.1.9.9.31.1.1.1.1
A list of OFFLOAD configuration values.
Status: current	Access: not-accessible
OBJECT-TYPE
	CipCardOffloadConfigEntry

cipCardOffloadConfigPath		1.3.6.1.4.1.9.9.31.1.1.1.1.1
Hex path identifier for the escon director switch port containing the fiber from the channel on the host to which this CMCC CLAW task connects. This is a concatenation of the switch port number, the channel logical address (used by the host to associate an logical partition (LPAR) with the control unit), and the control unit logical address (address of a logical control unit used by the host to associate a group of physical devices). For a directly connected channel, the switch port number is usually 01.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(2)

cipCardOffloadConfigDevice		1.3.6.1.4.1.9.9.31.1.1.1.1.2
Two digit hex device address for the device the SNA host will use to communicate with the offload task on the CMCC. The address must be even.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(2)

cipCardOffloadConfigIpAddr		1.3.6.1.4.1.9.9.31.1.1.1.1.3
IP address of the host application for the offload task as specified in the HOME statement of the PROFILE TCPIP.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

cipCardOffloadConfigHostName		1.3.6.1.4.1.9.9.31.1.1.1.1.4
Host name parameter as specified in the DEVICE statement of the PROFILE TCPIP.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..10)

cipCardOffloadConfigRouterName		1.3.6.1.4.1.9.9.31.1.1.1.1.5
Workstation name parameter as specified in the DEVICE statement of the mainframe PROFILE TCPIP.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..10)

cipCardOffloadConfigLinkHostAppl		1.3.6.1.4.1.9.9.31.1.1.1.1.6
Name of the application providing the IP link services, as specified in the mainframe configuration.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..10)

cipCardOffloadConfigLinkRouterAppl		1.3.6.1.4.1.9.9.31.1.1.1.1.7
Name of the router application providing the IP link services, as specified in the mainframe configuration.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..10)

cipCardOffloadConfigAPIHostAppl		1.3.6.1.4.1.9.9.31.1.1.1.1.8
Name of the mainframe application providing the API services, as specified in the mainframe configuration.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..10)

cipCardOffloadConfigAPIRouterAppl		1.3.6.1.4.1.9.9.31.1.1.1.1.9
Name of the router application providing the API services, as specified in the mainframe configuration.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..10)

cipCardOffloadConfigBroadcastEnable		1.3.6.1.4.1.9.9.31.1.1.1.1.10
Control processing of broadcast frames for the path/device this instance of OFFLOAD is configured on. Enable turns broadcast processing on.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

cipCardOffloadConfigRowStatus		1.3.6.1.4.1.9.9.31.1.1.1.1.11
This object is used by a management station to create or delete the row entry in cipCardOffloadConfigTable following the RowStatus textual convention.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

ciscoTcpOffloadMibConformance		1.3.6.1.4.1.9.9.31.2
OBJECT IDENTIFIER

ciscoTcpOffloadMibCompliances		1.3.6.1.4.1.9.9.31.2.1
OBJECT IDENTIFIER

ciscoTcpOffloadMibGroups		1.3.6.1.4.1.9.9.31.2.2
OBJECT IDENTIFIER

ciscoTcpOffloadMibCompliance		1.3.6.1.4.1.9.9.31.2.1.1
The compliance statement for the TcpIP Offload feature.
Status: current	Access: read-create
MODULE-COMPLIANCE

ciscoTcpOffloadGroup		1.3.6.1.4.1.9.9.31.2.2.1
A collection of objects providing configuration capability.
Status: current	Access: read-create
OBJECT-GROUP

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor