CISCOSB-STACK-MIB

File: CISCOSB-STACK-MIB.mib (9458 bytes)

Imported modules

BRIDGE-MIB	CISCOSB-MIB	SNMPv2-SMI
SNMPv2-TC

Imported symbols

MacAddress	switch001	OBJECT-TYPE
MODULE-IDENTITY	TruthValue	TEXTUAL-CONVENTION

Defined Types

StackMode
INTEGER	standalone(1), native(2), basic-hybrid(3), advanced-hybrid(4), advanced-hybrid-XG(5)

PortsPair
INTEGER	pair-s1s2(1), pair-s3s4(2), pair-s1s25G(3), pair-s1s2Xg(4), pair-lionXg(5)

HybridStackPortSpeed
INTEGER	port-speed-1G(1), port-speed-5G(2), port-speed-10G(3), port-speed-auto(4), port-speed-down(5)

HybridStackDeviceMode
INTEGER	mode-L2(1), mode-L3(2)

RlStackActiveUnitIdEntry
SEQUENCE
	rlStackCurrentUnitId	INTEGER
	rlStackActiveUnitIdAfterReset	INTEGER

RlStackHybridEntry
SEQUENCE
	rlStackHybridUnitId	INTEGER
	rlStackHybridStackMode	StackMode
	rlStackHybridPortsPair	PortsPair
	rlStackHybridPortNo1speed	HybridStackPortSpeed
	rlStackHybridPortNo2speed	HybridStackPortSpeed
	rlStackHybridUnitIdAfterReset	INTEGER
	rlStackHybridStackModeAfterReset	StackMode
	rlStackHybridPortsPairAfterReset	PortsPair
	rlStackHybridPortNo1speedAfterReset	HybridStackPortSpeed
	rlStackHybridPortNo2speedAfterReset	HybridStackPortSpeed
	rlStackHybridDeleteStartupAfterReset	TruthValue
	rlStackHybridDeviceModeAfterReset	HybridStackDeviceMode
	rlStackHybridXgPortNo1Num	INTEGER
	rlStackHybridXgPortNo1NumAfterReset	INTEGER
	rlStackHybridXgPortNo2Num	INTEGER
	rlStackHybridXgPortNo2NumAfterReset	INTEGER

Defined Values

rlStack		1.3.6.1.4.1.9.6.1.101.107
The private MIB module definition for stack.
MODULE-IDENTITY

rlStackActiveUnitIdTable		1.3.6.1.4.1.9.6.1.101.107.1
The table listing the active unit id of the requested unit.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlStackActiveUnitIdEntry

rlStackActiveUnitIdEntry		1.3.6.1.4.1.9.6.1.101.107.1.1
An entry in the rlStackActiveUnitIdTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlStackActiveUnitIdEntry

rlStackCurrentUnitId		1.3.6.1.4.1.9.6.1.101.107.1.1.1
The unit number device, which is the active unit id
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER

rlStackActiveUnitIdAfterReset		1.3.6.1.4.1.9.6.1.101.107.1.1.2
Indicates the unit id that will be after reset.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

rlStackUnitModeAfterReset		1.3.6.1.4.1.9.6.1.101.107.2
set unit type that will be after reset, standalone or stack.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	standalone(1), stack(2)

rlStackUnitMode		1.3.6.1.4.1.9.6.1.101.107.3
show unit type standalone or stack.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	standalone(1), stack(2)

rlStackUnitMacAddressAfterReset		1.3.6.1.4.1.9.6.1.101.107.4
The MAC address used by this bridge after rest.
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

rlStackHybridTable		1.3.6.1.4.1.9.6.1.101.107.5
The table listing information required for hybrid stack.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlStackHybridEntry

rlStackHybridEntry		1.3.6.1.4.1.9.6.1.101.107.5.1
An entry in the rlStackActiveUnitIdTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlStackHybridEntry

rlStackHybridUnitId		1.3.6.1.4.1.9.6.1.101.107.5.1.1
The unit number device, which is the active unit id
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..8

rlStackHybridStackMode		1.3.6.1.4.1.9.6.1.101.107.5.1.2
Indicates the unit stack mode.
Status: current	Access: read-only
OBJECT-TYPE
	StackMode

rlStackHybridPortsPair		1.3.6.1.4.1.9.6.1.101.107.5.1.3
Indicates the PortsPair.
Status: current	Access: read-only
OBJECT-TYPE
	PortsPair

rlStackHybridPortNo1speed		1.3.6.1.4.1.9.6.1.101.107.5.1.4
Indicates the rlStackHybridPortNo1speed.
Status: current	Access: read-only
OBJECT-TYPE
	HybridStackPortSpeed

rlStackHybridPortNo2speed		1.3.6.1.4.1.9.6.1.101.107.5.1.5
Indicates the rlStackHybridPortNo2speed.
Status: current	Access: read-only
OBJECT-TYPE
	HybridStackPortSpeed

rlStackHybridUnitIdAfterReset		1.3.6.1.4.1.9.6.1.101.107.5.1.6
Indicates the unit id that will be after reset.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..8

rlStackHybridStackModeAfterReset		1.3.6.1.4.1.9.6.1.101.107.5.1.7
Indicates the unit stack mode that will be after reset.
Status: current	Access: read-write
OBJECT-TYPE
	StackMode

rlStackHybridPortsPairAfterReset		1.3.6.1.4.1.9.6.1.101.107.5.1.8
Indicates the PortsPair that will be after reset.
Status: current	Access: read-write
OBJECT-TYPE
	PortsPair

rlStackHybridPortNo1speedAfterReset		1.3.6.1.4.1.9.6.1.101.107.5.1.9
Indicates the HybridStackPortSpeed that will be after reset.
Status: current	Access: read-write
OBJECT-TYPE
	HybridStackPortSpeed

rlStackHybridPortNo2speedAfterReset		1.3.6.1.4.1.9.6.1.101.107.5.1.10
Indicates the HybridStackPortSpeed that will be after reset.
Status: current	Access: read-write
OBJECT-TYPE
	HybridStackPortSpeed

rlStackHybridDeleteStartupAfterReset		1.3.6.1.4.1.9.6.1.101.107.5.1.11
Indicates whether the startup configuration is deleted after reset.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

rlStackHybridDeviceModeAfterReset		1.3.6.1.4.1.9.6.1.101.107.5.1.12
Indicates Device mode (Layer2 or Layer3) after reset.
Status: current	Access: read-write
OBJECT-TYPE
	HybridStackDeviceMode

rlStackHybridXgPortNo1Num		1.3.6.1.4.1.9.6.1.101.107.5.1.13
Indicates the 1st stack cascade active port number.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

rlStackHybridXgPortNo1NumAfterReset		1.3.6.1.4.1.9.6.1.101.107.5.1.14
Indicates the 1st stack cascade port number that will be after reset.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..16

rlStackHybridXgPortNo2Num		1.3.6.1.4.1.9.6.1.101.107.5.1.15
Indicates the 2nd stack cascade active port number.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

rlStackHybridXgPortNo2NumAfterReset		1.3.6.1.4.1.9.6.1.101.107.5.1.16
Indicates the 2nd stack cascade port number that will be after reset.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..16

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor