CISCOSB-rlFft

File: CISCOSB-rlFft.mib (55909 bytes)

Imported modules

CISCOSB-MIB SNMPv2-SMI SNMPv2-TC
INET-ADDRESS-MIB

Imported symbols

switch001 Unsigned32 IpAddress
MODULE-IDENTITY OBJECT-TYPE RowStatus
TruthValue PhysAddress DisplayString
TEXTUAL-CONVENTION InetAddress InetAddressType
InetAddressPrefixLength

Defined Types

Percents  
Specifies percents.
TEXTUAL-CONVENTION    
  INTEGER 0..100  

NetNumber  
Specifies the network identification.
TEXTUAL-CONVENTION    
  OCTET STRING Size(4)  

RlInetFftNumEntry  
SEQUENCE    
  rlInetFftNumIndex INTEGER
  rlInetFftNumAddressType InetAddressType
  rlInetFftNumStnRoutesNumber INTEGER
  rlInetFftNumSubRoutesNumber INTEGER
  rlInetFftNumInetTomeRoutesNumber INTEGER

RlInetFftStnEntry  
SEQUENCE    
  rlInetFftStnIndex INTEGER
  rlInetFftStnMrid INTEGER
  rlInetFftStnDstInetAddressType InetAddressType
  rlInetFftStnDstInetAddress InetAddress
  rlInetFftStnDstRouteInetPrefix InetAddressPrefixLength
  rlInetFftStnDstInetAddrType INTEGER
  rlInetFftStnDstMacAddress PhysAddress
  rlInetFftStnSrcMacAddress PhysAddress
  rlInetFftStnOutIfIndex INTEGER
  rlInetFftStnVid INTEGER
  rlInetFftStnTaggedMode INTEGER
  rlInetFftStnAge INTEGER

RlInetFftSubEntry  
SEQUENCE    
  rlInetFftSubMrid INTEGER
  rlInetFftSubDstInetSubnetType InetAddressType
  rlInetFftSubDstInetSubnet InetAddress
  rlInetFftSubDstInetPrefix InetAddressPrefixLength
  rlInetFftSubNextHopSetRefCount INTEGER
  rlInetFftSubNextHopCount INTEGER
  rlInetFftSubNextHopIfindex1 INTEGER
  rlInetFftSubNextHopInetAddr1Type InetAddressType
  rlInetFftSubNextHopInetAddr1 InetAddress
  rlInetFftSubNextHopIfindex2 INTEGER
  rlInetFftSubNextHopInetAddr2Type InetAddressType
  rlInetFftSubNextHopInetAddr2 InetAddress
  rlInetFftSubNextHopIfindex3 INTEGER
  rlInetFftSubNextHopInetAddr3Type InetAddressType
  rlInetFftSubNextHopInetAddr3 InetAddress
  rlInetFftSubNextHopIfindex4 INTEGER
  rlInetFftSubNextHopInetAddr4Type InetAddressType
  rlInetFftSubNextHopInetAddr4 InetAddress
  rlInetFftSubNextHopIfindex5 INTEGER
  rlInetFftSubNextHopInetAddr5Type InetAddressType
  rlInetFftSubNextHopInetAddr5 InetAddress
  rlInetFftSubNextHopIfindex6 INTEGER
  rlInetFftSubNextHopInetAddr6Type InetAddressType
  rlInetFftSubNextHopInetAddr6 InetAddress
  rlInetFftSubNextHopIfindex7 INTEGER
  rlInetFftSubNextHopInetAddr7Type InetAddressType
  rlInetFftSubNextHopInetAddr7 InetAddress
  rlInetFftSubNextHopIfindex8 INTEGER
  rlInetFftSubNextHopInetAddr8Type InetAddressType
  rlInetFftSubNextHopInetAddr8 InetAddress
  rlInetFftSubAge INTEGER

RlInetFftCountersEntry  
SEQUENCE    
  rlInetFftCountersIndex INTEGER
  rlInetFftInReceives INTEGER
  rlInetFftForwDatagrams INTEGER
  rlInetFftInDiscards INTEGER

RlInetFftNextHopEntry  
SEQUENCE    
  rlInetFftNextHopifindex INTEGER
  rlInetFftNextHopInetAddressType InetAddressType
  rlInetFftNextHopInetAddress InetAddress
  rlInetFftNextHopValid INTEGER
  rlInetFftNextHopType INTEGER
  rlInetFftNextHopReferenceCount INTEGER
  rlInetFftNextHopNetAddress PhysAddress
  rlInetFftNextHopVid INTEGER
  rlInetFftNextHopMacAddress PhysAddress
  rlInetFftNextHopOutIfIndex INTEGER

RlInetFftL2InfoEntry  
SEQUENCE    
  rlInetFftL2InfoIfindex INTEGER
  rlInetFftL2InfoDstMacAddress PhysAddress
  rlInetFftL2InfoValid INTEGER
  rlInetFftL2InfoType INTEGER
  rlInetFftL2InfoReferenceCount INTEGER
  rlInetFftL2InfoVid INTEGER
  rlInetFftL2InfoSrcMacAddress PhysAddress
  rlInetFftL2InfoOutIfIndex INTEGER
  rlInetFftL2InfoTaggedMode INTEGER

RlIpxFftNumEntry  
SEQUENCE    
  rlIpxFftNumIndex INTEGER
  rlIpxFftNumStnRoutesNumber INTEGER
  rlIpxFftNumSubRoutesNumber INTEGER

RlIpxFftStnEntry  
SEQUENCE    
  rlIpxFftStnIndex INTEGER
  rlIpxFftStnDstNetid NetNumber
  rlIpxFftStnDstNode PhysAddress
  rlIpxFftStnSrcNetid NetNumber
  rlIpxFftStnSrcNode PhysAddress
  rlIpxFftStnDstIpxAddrType INTEGER
  rlIpxFftStnEncapsulation INTEGER
  rlIpxFftStnDstMacAddress PhysAddress
  rlIpxFftStnSrcMacAddress PhysAddress
  rlIpxFftStnOutIfIndex INTEGER
  rlIpxFftStnTci INTEGER
  rlIpxFftStnFacsIndex INTEGER
  rlIpxFftStnAge INTEGER

RlIpxFftSubEntry  
SEQUENCE    
  rlIpxFftSubIndex INTEGER
  rlIpxFftSubDstNetid NetNumber
  rlIpxFftSubEncapsulation INTEGER
  rlIpxFftSubDstMacAddress PhysAddress
  rlIpxFftSubSrcMacAddress PhysAddress
  rlIpxFftSubOutIfIndex INTEGER
  rlIpxFftSubTci INTEGER
  rlIpxFftSubFacsIndex INTEGER
  rlIpxFftSubAge INTEGER

RlIpxFftCountersEntry  
SEQUENCE    
  rlIpxFftCountersIndex INTEGER
  rlIpxFftInReceives INTEGER
  rlIpxFftForwDatagrams INTEGER
  rlIpxFftInDiscards INTEGER

RlIpmFftNumEntry  
SEQUENCE    
  rlIpmFftNumIndex INTEGER
  rlIpmFftNumRoutesNumber INTEGER

RlIpmFftEntry  
SEQUENCE    
  rlIpmFftIndex INTEGER
  rlIpmFftSrcIpAddress IpAddress
  rlIpmFftDstIpAddress IpAddress
  rlIpmFftSrcIpMask IpAddress
  rlIpmFftInputIfIndex INTEGER
  rlIpmFftInputVlanTag INTEGER
  rlIpmFftForwardAction INTEGER
  rlIpmFftInportAction INTEGER
  rlIpmFftAge INTEGER

RlIpmFftPortTagEntry  
SEQUENCE    
  rlIpmFftPortIndex INTEGER
  rlIpmFftPortSrcIpAddress IpAddress
  rlIpmFftPortDstIpAddress IpAddress
  rlIpmFftPortOutputifIndex INTEGER
  rlIpmFftPortOutputTag INTEGER

RlIpmFftCountersEntry  
SEQUENCE    
  rlIpmFftCountersIndex INTEGER
  rlIpmFftInReceives INTEGER
  rlIpmFftForwDatagrams INTEGER
  rlIpmFftInDiscards INTEGER

Defined Values

rlFFT 1.3.6.1.4.1.9.6.1.101.47
The private MIB module definition for switch001 Fast Forwarding Tables.
MODULE-IDENTITY    

rlIpFFT 1.3.6.1.4.1.9.6.1.101.47.1
OBJECT IDENTIFIER    

rlIpFftMibVersion 1.3.6.1.4.1.9.6.1.101.47.1.1
MIB's version, the current version is 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetMaxFftNumber 1.3.6.1.4.1.9.6.1.101.47.1.2
The maximum number of IP FFTs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftDynamicSupported 1.3.6.1.4.1.9.6.1.101.47.1.3
Specifies whether dynamic IP FFTs are supported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlInetFftSubnetSupported 1.3.6.1.4.1.9.6.1.101.47.1.4
Specifies whether subtable per IP subnet is supported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpFftUnknownAddrMsgUsed 1.3.6.1.4.1.9.6.1.101.47.1.5
Specifies whether the 3SW uses the unknown address message.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER used(1), unused(2)  

rlInetFftAgingTimeSupported 1.3.6.1.4.1.9.6.1.101.47.1.6
Specifies whether aging time is supported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpFftSrcAddrSupported 1.3.6.1.4.1.9.6.1.101.47.1.7
Specifies whether an IP subtable per station contains source IP address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlInetFftAgingTimeout 1.3.6.1.4.1.9.6.1.101.47.1.8
The aging timeout in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

rlIpFftRedBoundary 1.3.6.1.4.1.9.6.1.101.47.1.9
The red boundary in percents.
Status: current Access: read-write
OBJECT-TYPE    
  Percents  

rlIpFftYellowBoundary 1.3.6.1.4.1.9.6.1.101.47.1.10
The yellow boundary in percents.
Status: current Access: read-write
OBJECT-TYPE    
  Percents  

rlInetFftNumTable 1.3.6.1.4.1.9.6.1.101.47.1.12
The (conceptual) table containing routes' numbers of the IP SFFTs and IP NFFTs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlInetFftNumEntry

rlInetFftNumEntry 1.3.6.1.4.1.9.6.1.101.47.1.12.1
An entry (conceptual row) containing the containing routes' numbers of IP SFFT and IP NFFT
Status: current Access: not-accessible
OBJECT-TYPE    
  RlInetFftNumEntry  

rlInetFftNumIndex 1.3.6.1.4.1.9.6.1.101.47.1.12.1.1
The value of the index of the IP FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftNumAddressType 1.3.6.1.4.1.9.6.1.101.47.1.12.1.2
The inet address type that are contained in the IP SFFT.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

rlInetFftNumStnRoutesNumber 1.3.6.1.4.1.9.6.1.101.47.1.12.1.3
The number of routes that are contained in the IP SFFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftNumSubRoutesNumber 1.3.6.1.4.1.9.6.1.101.47.1.12.1.4
The number of routes that are contained in the IP NFFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftNumInetTomeRoutesNumber 1.3.6.1.4.1.9.6.1.101.47.1.12.1.5
The number of routes that are Inet To Me.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftStnTable 1.3.6.1.4.1.9.6.1.101.47.1.13
The (conceptual) table contains IP Fast Forwarding information per station for IP datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlInetFftStnEntry

rlInetFftStnEntry 1.3.6.1.4.1.9.6.1.101.47.1.13.1
An entry (conceptual row) contains the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlInetFftStnEntry  

rlInetFftStnIndex 1.3.6.1.4.1.9.6.1.101.47.1.13.1.1
The value of the index of the IP FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftStnMrid 1.3.6.1.4.1.9.6.1.101.47.1.13.1.2
The router's Instance Identifier in the SFFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftStnDstInetAddressType 1.3.6.1.4.1.9.6.1.101.47.1.13.1.3
The Ip destination type for which this entry contains IP forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

rlInetFftStnDstInetAddress 1.3.6.1.4.1.9.6.1.101.47.1.13.1.4
The IP destination address for which this entry contains IP forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

rlInetFftStnDstRouteInetPrefix 1.3.6.1.4.1.9.6.1.101.47.1.13.1.5
The IP destination prefix for which this entry contains IP forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressPrefixLength  

rlInetFftStnDstInetAddrType 1.3.6.1.4.1.9.6.1.101.47.1.13.1.6
The IP destination address type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

rlInetFftStnDstMacAddress 1.3.6.1.4.1.9.6.1.101.47.1.13.1.7
The MAC destination address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlInetFftStnSrcMacAddress 1.3.6.1.4.1.9.6.1.101.47.1.13.1.8
The MAC source address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlInetFftStnOutIfIndex 1.3.6.1.4.1.9.6.1.101.47.1.13.1.9
The value of ifIndex of output physical port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftStnVid 1.3.6.1.4.1.9.6.1.101.47.1.13.1.10
The vid of the output port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftStnTaggedMode 1.3.6.1.4.1.9.6.1.101.47.1.13.1.11
The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field gets the BasedPortConfig value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER untagged(1), tagged(2), basedPortConfig(3)  

rlInetFftStnAge 1.3.6.1.4.1.9.6.1.101.47.1.13.1.12
The age of the entry in seconds from the inserting.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftSubTable 1.3.6.1.4.1.9.6.1.101.47.1.14
The (conceptual) table containing IP Fast Forwarding information per subnet for IP datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlInetFftSubEntry

rlInetFftSubEntry 1.3.6.1.4.1.9.6.1.101.47.1.14.1
An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlInetFftSubEntry  

rlInetFftSubMrid 1.3.6.1.4.1.9.6.1.101.47.1.14.1.1
The router's Instance Identifier in the NFFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftSubDstInetSubnetType 1.3.6.1.4.1.9.6.1.101.47.1.14.1.2
The IP destination subnet type for which this entry contains IP forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

rlInetFftSubDstInetSubnet 1.3.6.1.4.1.9.6.1.101.47.1.14.1.3
The IP destination subnet for which this entry contains IP forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

rlInetFftSubDstInetPrefix 1.3.6.1.4.1.9.6.1.101.47.1.14.1.4
The IP destination prefix for which this entry contains IP forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressPrefixLength  

rlInetFftSubNextHopSetRefCount 1.3.6.1.4.1.9.6.1.101.47.1.14.1.5
The number of NFFT entries that used the given NextHop set (ECMP path).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftSubNextHopCount 1.3.6.1.4.1.9.6.1.101.47.1.14.1.6
The number of used NextHops in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftSubNextHopIfindex1 1.3.6.1.4.1.9.6.1.101.47.1.14.1.7
The first NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftSubNextHopInetAddr1Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.8
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

rlInetFftSubNextHopInetAddr1 1.3.6.1.4.1.9.6.1.101.47.1.14.1.9
The first NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

rlInetFftSubNextHopIfindex2 1.3.6.1.4.1.9.6.1.101.47.1.14.1.10
The second NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftSubNextHopInetAddr2Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.11
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

rlInetFftSubNextHopInetAddr2 1.3.6.1.4.1.9.6.1.101.47.1.14.1.12
The second NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

rlInetFftSubNextHopIfindex3 1.3.6.1.4.1.9.6.1.101.47.1.14.1.13
The third NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftSubNextHopInetAddr3Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.14
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

rlInetFftSubNextHopInetAddr3 1.3.6.1.4.1.9.6.1.101.47.1.14.1.15
The third NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

rlInetFftSubNextHopIfindex4 1.3.6.1.4.1.9.6.1.101.47.1.14.1.16
The fourth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftSubNextHopInetAddr4Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.17
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

rlInetFftSubNextHopInetAddr4 1.3.6.1.4.1.9.6.1.101.47.1.14.1.18
The fourth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

rlInetFftSubNextHopIfindex5 1.3.6.1.4.1.9.6.1.101.47.1.14.1.19
The fifth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftSubNextHopInetAddr5Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.20
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

rlInetFftSubNextHopInetAddr5 1.3.6.1.4.1.9.6.1.101.47.1.14.1.21
The fifth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

rlInetFftSubNextHopIfindex6 1.3.6.1.4.1.9.6.1.101.47.1.14.1.22
The six NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftSubNextHopInetAddr6Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.23
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

rlInetFftSubNextHopInetAddr6 1.3.6.1.4.1.9.6.1.101.47.1.14.1.24
The six NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

rlInetFftSubNextHopIfindex7 1.3.6.1.4.1.9.6.1.101.47.1.14.1.25
The seven NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftSubNextHopInetAddr7Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.26
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

rlInetFftSubNextHopInetAddr7 1.3.6.1.4.1.9.6.1.101.47.1.14.1.27
The seven NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

rlInetFftSubNextHopIfindex8 1.3.6.1.4.1.9.6.1.101.47.1.14.1.28
The eight NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftSubNextHopInetAddr8Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.29
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

rlInetFftSubNextHopInetAddr8 1.3.6.1.4.1.9.6.1.101.47.1.14.1.30
The eight NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

rlInetFftSubAge 1.3.6.1.4.1.9.6.1.101.47.1.14.1.31
The age of the entry in seconds from the inserting.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftCountersTable 1.3.6.1.4.1.9.6.1.101.47.1.15
The (conceptual) table containing IP Counters information per one IP FFT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlInetFftCountersEntry

rlInetFftCountersEntry 1.3.6.1.4.1.9.6.1.101.47.1.15.1
An entry (conceptual row) containing the IP Counters information containing amount of IP datagrams passed by certain IP FFT.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlInetFftCountersEntry  

rlInetFftCountersIndex 1.3.6.1.4.1.9.6.1.101.47.1.15.1.1
The value of the index of the IP FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftInReceives 1.3.6.1.4.1.9.6.1.101.47.1.15.1.2
The amount of received IP datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftForwDatagrams 1.3.6.1.4.1.9.6.1.101.47.1.15.1.3
The amount of forwarded IP datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftInDiscards 1.3.6.1.4.1.9.6.1.101.47.1.15.1.4
The amount of discarded IP datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftNextHopTable 1.3.6.1.4.1.9.6.1.101.47.1.16
The (conceptual) table contains NextHop information used for routing IP datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlInetFftNextHopEntry

rlInetFftNextHopEntry 1.3.6.1.4.1.9.6.1.101.47.1.16.1
An entry (conceptual row) contains the NextHop info information for routing IP datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlInetFftNextHopEntry  

rlInetFftNextHopifindex 1.3.6.1.4.1.9.6.1.101.47.1.16.1.1
The value of the IP Interface index of the NextHop.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftNextHopInetAddressType 1.3.6.1.4.1.9.6.1.101.47.1.16.1.2
The IP address type of a NextHop for which an entry contains IP forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

rlInetFftNextHopInetAddress 1.3.6.1.4.1.9.6.1.101.47.1.16.1.3
The IP address of a NextHop for which an entry contains IP forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

rlInetFftNextHopValid 1.3.6.1.4.1.9.6.1.101.47.1.16.1.4
The NextHop Valid bit. When L2 info is missing, a NextHop has Invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

rlInetFftNextHopType 1.3.6.1.4.1.9.6.1.101.47.1.16.1.5
The NextHop type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2), reject(3), drop(4)  

rlInetFftNextHopReferenceCount 1.3.6.1.4.1.9.6.1.101.47.1.16.1.6
IF LPM is supported: If ecmp supported: the field NextHop_ref_count used to save number of NextHop SETs that use the NextHop. Otherwise, NextHop_ref_count used to save number of NFFT entries that use the NextHop. IF LPM is NOT supported: NextHop_ref_count used to save number of Remote SFFT entries that use the NextHop.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftNextHopNetAddress 1.3.6.1.4.1.9.6.1.101.47.1.16.1.7
The NextHop Physical Address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlInetFftNextHopVid 1.3.6.1.4.1.9.6.1.101.47.1.16.1.8
The vid of the output port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftNextHopMacAddress 1.3.6.1.4.1.9.6.1.101.47.1.16.1.9
The MAC destination address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlInetFftNextHopOutIfIndex 1.3.6.1.4.1.9.6.1.101.47.1.16.1.10
The value of ifIndex of output physical port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftL2InfoTable 1.3.6.1.4.1.9.6.1.101.47.1.17
The (conceptual) table contains L2 information used for routing IP datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlInetFftL2InfoEntry

rlInetFftL2InfoEntry 1.3.6.1.4.1.9.6.1.101.47.1.17.1
An entry (conceptual row) contains the L2 info information for routing IP datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlInetFftL2InfoEntry  

rlInetFftL2InfoIfindex 1.3.6.1.4.1.9.6.1.101.47.1.17.1.1
The VLAN Ifindex of the destination port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftL2InfoDstMacAddress 1.3.6.1.4.1.9.6.1.101.47.1.17.1.2
The MAC destination address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlInetFftL2InfoValid 1.3.6.1.4.1.9.6.1.101.47.1.17.1.3
The L2 info entry valid bit. When L2 info is missing some information, an L2 info has Invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

rlInetFftL2InfoType 1.3.6.1.4.1.9.6.1.101.47.1.17.1.4
The L2 info type. With Enthernet media l2 info type is vlan. WIth Tunneling feature, l2 info type will be expanded.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), vlan(2)  

rlInetFftL2InfoReferenceCount 1.3.6.1.4.1.9.6.1.101.47.1.17.1.5
The reference count contains a number of NextHop entries that use this L2 info.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftL2InfoVid 1.3.6.1.4.1.9.6.1.101.47.1.17.1.6
The vid of the destination port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftL2InfoSrcMacAddress 1.3.6.1.4.1.9.6.1.101.47.1.17.1.7
The MAC source address placed to Ehernet Header of IP forwarded packet.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlInetFftL2InfoOutIfIndex 1.3.6.1.4.1.9.6.1.101.47.1.17.1.8
The value of ifIndex of output physical port the packet is forwarded through.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlInetFftL2InfoTaggedMode 1.3.6.1.4.1.9.6.1.101.47.1.17.1.9
The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field get the BasedPortConfig value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER untagged(1), tagged(2), basedPortConfig(3)  

rlIpv6FftRedBoundary 1.3.6.1.4.1.9.6.1.101.47.1.18
The red boundary in percents.
Status: current Access: read-write
OBJECT-TYPE    
  Percents  

rlIpv6FftYellowBoundary 1.3.6.1.4.1.9.6.1.101.47.1.19
The yellow boundary in percents.
Status: current Access: read-write
OBJECT-TYPE    
  Percents  

rlIpxFFT 1.3.6.1.4.1.9.6.1.101.47.2
OBJECT IDENTIFIER    

rlIpxFftMibVersion 1.3.6.1.4.1.9.6.1.101.47.2.1
MIB's version, the current version is 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxMaxFftNumber 1.3.6.1.4.1.9.6.1.101.47.2.2
The maximun number of IPX FFTs. An IPX FFT gets a number from 1 until rlIpxMaxFftSetNumber.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftDynamicSupported 1.3.6.1.4.1.9.6.1.101.47.2.3
Specifies whether dynamic IPX FFTs are supported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpxFftNetworkSupported 1.3.6.1.4.1.9.6.1.101.47.2.4
Specifies whether subtable per IPX network is supported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpxFftUnknownAddrMsgUsed 1.3.6.1.4.1.9.6.1.101.47.2.5
Specifies whether the 3SW uses the unknown address message.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER used(1), unused(2)  

rlIpxFftAgingTimeSupported 1.3.6.1.4.1.9.6.1.101.47.2.6
Specifies whether aging time is supported for subtable per station.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpxFftSrcAddrSupported 1.3.6.1.4.1.9.6.1.101.47.2.7
Specifies whether an IPX subtable per station contains source IPX address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpxFftAgingTimeout 1.3.6.1.4.1.9.6.1.101.47.2.8
The aging timeout in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

rlIpxFftRedBoundary 1.3.6.1.4.1.9.6.1.101.47.2.9
The red boundary in percents.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

rlIpxFftYellowBoundary 1.3.6.1.4.1.9.6.1.101.47.2.10
The yellow boundary in percents.
Status: current Access: read-write
OBJECT-TYPE    
  Percents  

rlIpxFftNumTable 1.3.6.1.4.1.9.6.1.101.47.2.12
The (conceptual) table containing number routes of the IPX Fast Forwarding Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpxFftNumEntry

rlIpxFftNumEntry 1.3.6.1.4.1.9.6.1.101.47.2.12.1
An entry (conceptual row) containing the containing number routes of of IPX SFFT and IPX NFFT
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpxFftNumEntry  

rlIpxFftNumIndex 1.3.6.1.4.1.9.6.1.101.47.2.12.1.1
The value of the index of the IPX FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftNumStnRoutesNumber 1.3.6.1.4.1.9.6.1.101.47.2.12.1.2
The number of routes containing in the IPX SFFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftNumSubRoutesNumber 1.3.6.1.4.1.9.6.1.101.47.2.12.1.3
The number of routes containing in the IPX NFFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftStnTable 1.3.6.1.4.1.9.6.1.101.47.2.13
The (conceptual) table containing IPX Fast Forwarding information per station for IPX.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpxFftStnEntry

rlIpxFftStnEntry 1.3.6.1.4.1.9.6.1.101.47.2.13.1
An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpxFftStnEntry  

rlIpxFftStnIndex 1.3.6.1.4.1.9.6.1.101.47.2.13.1.1
The value of the index of the IPX FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftStnDstNetid 1.3.6.1.4.1.9.6.1.101.47.2.13.1.2
The destination network for which this entry contains IPX forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  NetNumber  

rlIpxFftStnDstNode 1.3.6.1.4.1.9.6.1.101.47.2.13.1.3
The destination node for which this entry contains IPX forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpxFftStnSrcNetid 1.3.6.1.4.1.9.6.1.101.47.2.13.1.4
The source network for which this entry contains IPX forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  NetNumber  

rlIpxFftStnSrcNode 1.3.6.1.4.1.9.6.1.101.47.2.13.1.5
The destination node for which this entry contains IPX forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpxFftStnDstIpxAddrType 1.3.6.1.4.1.9.6.1.101.47.2.13.1.6
The destination address type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

rlIpxFftStnEncapsulation 1.3.6.1.4.1.9.6.1.101.47.2.13.1.7
The encapsulation method associated with this route.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER novell(1), ethernet(2), llc(3), snap(4)  

rlIpxFftStnDstMacAddress 1.3.6.1.4.1.9.6.1.101.47.2.13.1.8
The MAC destination address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpxFftStnSrcMacAddress 1.3.6.1.4.1.9.6.1.101.47.2.13.1.9
The MAC source address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpxFftStnOutIfIndex 1.3.6.1.4.1.9.6.1.101.47.2.13.1.10
The value of ifIndex of output physical port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftStnTci 1.3.6.1.4.1.9.6.1.101.47.2.13.1.11
The value of TCI or 0.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftStnFacsIndex 1.3.6.1.4.1.9.6.1.101.47.2.13.1.12
The value of index of the FACS Table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftStnAge 1.3.6.1.4.1.9.6.1.101.47.2.13.1.13
The age of the entry in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftSubTable 1.3.6.1.4.1.9.6.1.101.47.2.14
The (conceptual) table containing IPX Fast Forwarding information per network for IPX .
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpxFftSubEntry

rlIpxFftSubEntry 1.3.6.1.4.1.9.6.1.101.47.2.14.1
An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpxFftSubEntry  

rlIpxFftSubIndex 1.3.6.1.4.1.9.6.1.101.47.2.14.1.1
The value of the index of the IPX FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftSubDstNetid 1.3.6.1.4.1.9.6.1.101.47.2.14.1.2
The destination network for which this entry contains IPX forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  NetNumber  

rlIpxFftSubEncapsulation 1.3.6.1.4.1.9.6.1.101.47.2.14.1.3
The encapsulation method associated with this route.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER novell(1), ethernet(2), llc(3), snap(4)  

rlIpxFftSubDstMacAddress 1.3.6.1.4.1.9.6.1.101.47.2.14.1.4
The MAC destination address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpxFftSubSrcMacAddress 1.3.6.1.4.1.9.6.1.101.47.2.14.1.5
The MAC source address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpxFftSubOutIfIndex 1.3.6.1.4.1.9.6.1.101.47.2.14.1.6
The value of ifIndex of output physical port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftSubTci 1.3.6.1.4.1.9.6.1.101.47.2.14.1.7
The value of TCI or 0.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftSubFacsIndex 1.3.6.1.4.1.9.6.1.101.47.2.14.1.8
The value of index of the FACS Table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftSubAge 1.3.6.1.4.1.9.6.1.101.47.2.14.1.9
The age of the entry in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftCountersTable 1.3.6.1.4.1.9.6.1.101.47.2.15
The (conceptual) table containing IPX Counters information per one IPX FFT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpxFftCountersEntry

rlIpxFftCountersEntry 1.3.6.1.4.1.9.6.1.101.47.2.15.1
An entry (conceptual row) containing the IP Counters information containing amount of IPX datagrams passed by certain IPX FFT.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpxFftCountersEntry  

rlIpxFftCountersIndex 1.3.6.1.4.1.9.6.1.101.47.2.15.1.1
The value of the index of the IPX FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftInReceives 1.3.6.1.4.1.9.6.1.101.47.2.15.1.2
The amount of received IPX datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftForwDatagrams 1.3.6.1.4.1.9.6.1.101.47.2.15.1.3
The amount of forwarded IPX datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftInDiscards 1.3.6.1.4.1.9.6.1.101.47.2.15.1.4
The amount of discarded IPX datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFFT 1.3.6.1.4.1.9.6.1.101.47.3
OBJECT IDENTIFIER    

rlIpmFftMibVersion 1.3.6.1.4.1.9.6.1.101.47.3.1
MIB's version, the current version is 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmMaxFftNumber 1.3.6.1.4.1.9.6.1.101.47.3.2
The maximun number of IPM FFTs. NT_IPM gets a number from Host Parameters
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftDynamicSupported 1.3.6.1.4.1.9.6.1.101.47.3.3
Specifies whether dynamic IPM FFTs are supported. An NT_IPM gets a number from Host Parameters
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpmFftUnknownAddrMsgUsed 1.3.6.1.4.1.9.6.1.101.47.3.4
Specifies whether the 3SW uses the unknown address message. An NT_IPM gets a number from Host Parameters
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER used(1), unused(2)  

rlIpmFftUserAgingTimeout 1.3.6.1.4.1.9.6.1.101.47.3.5
The aging timeout in seconds. SNMP user writes. There is a default value of aging timeout.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

rlIpmFftRouterAgingTimeout 1.3.6.1.4.1.9.6.1.101.47.3.6
The aging timeout in seconds. NT_IPM keeps value that Router level gave. This is high priority value for aging timeout.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftNumTable 1.3.6.1.4.1.9.6.1.101.47.3.8
The (conceptual) table containing number routes of the IPM Fast Forwarding Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpmFftNumEntry

rlIpmFftNumEntry 1.3.6.1.4.1.9.6.1.101.47.3.8.1
An entry (conceptual row) containing the containing number routes of an IPM FFT.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpmFftNumEntry  

rlIpmFftNumIndex 1.3.6.1.4.1.9.6.1.101.47.3.8.1.1
The value of the index of the IPM FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftNumRoutesNumber 1.3.6.1.4.1.9.6.1.101.47.3.8.1.2
The number of routes containing in the IPM FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftTable 1.3.6.1.4.1.9.6.1.101.47.3.9
The (conceptual) table containing IPM Fast Forwarding information for IPM datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpmFftEntry

rlIpmFftEntry 1.3.6.1.4.1.9.6.1.101.47.3.9.1
An entry (conceptual row) containing the IPM fast forwarding information for IP datagrams from a particular source and destination addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpmFftEntry  

rlIpmFftIndex 1.3.6.1.4.1.9.6.1.101.47.3.9.1.1
The value of the index of the IPM FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftSrcIpAddress 1.3.6.1.4.1.9.6.1.101.47.3.9.1.2
The IP source address for which this entry contains IPM forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpmFftDstIpAddress 1.3.6.1.4.1.9.6.1.101.47.3.9.1.3
The IPM destination address for which this entry contains IPM forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpmFftSrcIpMask 1.3.6.1.4.1.9.6.1.101.47.3.9.1.4
The IP source mask for which this entry contains IP forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpmFftInputIfIndex 1.3.6.1.4.1.9.6.1.101.47.3.9.1.5
The input ifIndex for which this entry contains IPM forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftInputVlanTag 1.3.6.1.4.1.9.6.1.101.47.3.9.1.6
The input Vlan tag together with input ifIndex defines pair (ifIndex, tag)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftForwardAction 1.3.6.1.4.1.9.6.1.101.47.3.9.1.7
The IPM forward action.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER forward(1), discard(2)  

rlIpmFftInportAction 1.3.6.1.4.1.9.6.1.101.47.3.9.1.8
The IPM illegal input port action.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER sentToCPU(1), discard(2)  

rlIpmFftAge 1.3.6.1.4.1.9.6.1.101.47.3.9.1.9
The age of the entry in seconds from the moment of inserting.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftPortTagTable 1.3.6.1.4.1.9.6.1.101.47.3.10
The (conceptual) table containing IPM FFT output port tag information for IPM datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpmFftPortTagEntry

rlIpmFftPortTagEntry 1.3.6.1.4.1.9.6.1.101.47.3.10.1
An entry (conceptual row) containing the IPM FFT output port tag information for IP datagrams from a particular source and destination addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpmFftPortTagEntry  

rlIpmFftPortIndex 1.3.6.1.4.1.9.6.1.101.47.3.10.1.1
The value of the index of the IPM FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftPortSrcIpAddress 1.3.6.1.4.1.9.6.1.101.47.3.10.1.2
The IP source address for which this entry contains IPM output port tag information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpmFftPortDstIpAddress 1.3.6.1.4.1.9.6.1.101.47.3.10.1.3
The IPM destination address for which this entry contains IPM port tag information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpmFftPortOutputifIndex 1.3.6.1.4.1.9.6.1.101.47.3.10.1.4
The output ifIndex
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftPortOutputTag 1.3.6.1.4.1.9.6.1.101.47.3.10.1.5
The output Vlan tag together with output ifIndex defines pair (ifIndex, tag)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftCountersTable 1.3.6.1.4.1.9.6.1.101.47.3.11
The (conceptual) table containing IPM Counters information per FFT number.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpmFftCountersEntry

rlIpmFftCountersEntry 1.3.6.1.4.1.9.6.1.101.47.3.11.1
An entry (conceptual row) containing the IPM Counters information containing amount of IPM datagrams passed by certain FFT.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpmFftCountersEntry  

rlIpmFftCountersIndex 1.3.6.1.4.1.9.6.1.101.47.3.11.1.1
The value of the index of the IPM FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftInReceives 1.3.6.1.4.1.9.6.1.101.47.3.11.1.2
The amount of received IPM datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftForwDatagrams 1.3.6.1.4.1.9.6.1.101.47.3.11.1.3
The amount of forwarded IPM datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftInDiscards 1.3.6.1.4.1.9.6.1.101.47.3.11.1.4
The amount of discarded IPM datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER