CM-ENTITY-MIB

File: CM-ENTITY-MIB.mib (335606 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
CM-COMMON-MIB ADVA-MIB ENTITY-MIB
CM-SYSTEM-MIB

Imported symbols

MODULE-COMPLIANCE OBJECT-GROUP MODULE-IDENTITY
OBJECT-TYPE Integer32 IpAddress
DisplayString TruthValue RowStatus
StorageType VariablePointer DateAndTime
TEXTUAL-CONVENTION AdminState OperationalState
SecondaryState RestartType fsp150cm
VlanId CmPmIntervalType TDMFrequencySourceType
PhysicalIndex CmAutoProvMode

Defined Types

NeProvAction  
Network Element Action to accept or decline the Network Element.
TEXTUAL-CONVENTION    
  INTEGER accept(1), decline(2)  

NetworkElementType  
Network Element Type.
TEXTUAL-CONVENTION    
  INTEGER onerackunit(1), hubshelf(2), cle(3), aggregation(4), cpmr(5), ccge101(6), ccge206(7), ccge201(8), ccge201se(9), ccge206f(10), ccge112(11), ccge114(12), ccge206v(13), ccxg210(14), cct1804(15), cct3204(16), ccsyncprobe(17), ccge114h(18), ccge114ph(19), ccge114sh(20), ccge114s(21), sh1pcs(22), ccosa5411(23), ccge112pro(24), ccge112proM(25), ccge114pro(26), ccge114proC(27), ccge114proSH(28), ccge114proCSH(29), ccge114proHE(30), ccge112proH(31), ccxg210c(32), ccosa5420(33), ccosa5421(34), ccge114g(35)  

SlotType  
Slot Type.
TEXTUAL-CONVENTION    
  INTEGER scu(1), psu(2), fan(3), generic(4), lag(5), nemi(6), stu(7), swf-140g(8), ami(9), sti(10)  

ShelfType  
Shelf Type.
TEXTUAL-CONVENTION    
  INTEGER onerackunit(1), hubshelf(2), cle(3), aggregation(4), cpmr(5), onerackunit-ge101(6), onerackunit-ge206(7), onerackunit-ge201(8), onerackunit-ge201se(9), onerackunit-ge206f(10), onerackunit-ge112(11), onerackunit-ge114(12), onerackunit-ge206v(13), onerackunit-xg210(14), onerackunit-t1804(15), onerackunit-t3204(16), onerackunit-syncprobe(17), onerackunit-ge114h(18), onerackunit-ge114ph(19), onerackunit-ge114sh(20), onerackunit-ge114s(21), onerackunit-sh1pcs(22), onerackunit-osa5411(23), onerackunitGe112Pro(24), ge112ProM(25), onerackunitGe114Pro(26), onerackunitGe114ProC(27), onerackunitGe114ProSH(28), onerackunitGe114ProCSH(29), onerackunitGe114ProHE(30), onerackunitGe112ProH(31), onerackunit-xg210c(32), onerackunit-osa5420(33), onerackunit-osa5421(34), onerackunit-ge114g(35)  

ShelfAction  
Shelf Action.
TEXTUAL-CONVENTION    
  INTEGER initiateLampTest(1), initiateACO(2), coldRestart(3)  

PsuType  
Power Supply Type.
TEXTUAL-CONVENTION    
  INTEGER unknown(0), ac(1), dc(2)  

CardType  
Card Type.
TEXTUAL-CONVENTION    
  INTEGER none(1), psu(2), fan(3), nemi(4), scu(5), eth-10-100-1000-ntu(6), eth-cpmr(7), eth-ge-101(8), eth-ge-206(9), eth-ge-201(10), eth-ge-201se(11), eth-10-100-1000-nte(12), scu-t(13), eth-ge-206f(14), eth-xg-1x(15), swf-140g(16), stu(17), eth-ge-10s(18), ami(19), sti(20), eth-ge-112(21), eth-ge-114(22), eth-ge-206v(23), eth-ge-4e-cc(24), eth-ge-4s-cc(25), eth-xg-210(26), eth-xg-1x-cc(27), eth-xg-1s-cc(28), stm1-4-et(29), pwe3-ocnstm(30), pwe3-e1t1(31), eth-xg-1x-h(32), eth-ge-10s-h(33), eth-t1804(34), eth-t3204(35), eth-ge-syncprobe(36), eth-ge-8s-cc(37), eth-ge-114h(38), eth-ge-114ph(39), eth-fe-36e(40), eth-ge-114sh(41), eth-ge-114s(42), sti-h(43), stu-h(44), eth-ge-8e-cc(45), eth-sh1pcs(46), eth-osa5411(47), ethGe112Pro(48), ethGe112ProM(49), ethGe114Pro(50), ethGe114ProC(51), ethGe114ProSH(52), ethGe114ProCSH(53), ethGe114ProHE(54), ethGe112ProH(55), eth-xg-210c(56), eth-ge-8sc-cc(57), eth-osa5420(58), eth-osa5421(59), bits-x16(60), eth-ge-114g(61)  

CmCPMRLinkLossFwdMode  
Link Loss Forwarding Mode on the CPMR.
TEXTUAL-CONVENTION    
  INTEGER llfmode-none(1), llfmode-acc2acc(2), llfmode-net2acc(3), llfmode-both(4)  

PWE3OCNSTMCardMode  
OCN/STM Card Mode.
TEXTUAL-CONVENTION    
  INTEGER stm4(1), oc12(2), stm1(3), oc3(4)  

PWE3E1T1CardMode  
OCN/STM Card Mode.
TEXTUAL-CONVENTION    
  INTEGER t1-16(1), e1-16(2)  

PSNEncapsulationMode  
OCN/STM Card Mode.
TEXTUAL-CONVENTION    
  INTEGER ethernet(1), mpls(2)  

LLDPEnableAction  
Enable (TxAndRx, Tx-Only, Rx-Only) LLDP or Disable LLDP.
TEXTUAL-CONVENTION    
  INTEGER notApplicable(0), enableLLDP(1), disableLLDP(2), enableLLDPTxOnly(3), enableLLDPRxOnly(4)  

NetworkElementEntry  
SEQUENCE    
  neIndex Integer32
  neName DisplayString
  neType NetworkElementType
  neContact DisplayString
  neLocation DisplayString
  neDescription DisplayString
  neCmdPromptPrefix DisplayString
  neAccepted TruthValue
  neFromPort VariablePointer
  neProvAction NeProvAction
  neStorageType StorageType
  neRowStatus RowStatus
  neAutoProvMode CmAutoProvMode
  neFineGrainedPmInterval CmPmIntervalType

ShelfEntry  
SEQUENCE    
  shelfIndex Integer32
  shelfEntityIndex PhysicalIndex
  shelfType ShelfType
  shelfbackplaneRev DisplayString
  shelfbackplaneDOM DateAndTime
  shelfbackplaneSerialNo DisplayString
  shelfAction ShelfAction
  shelfAdminState AdminState
  shelfOperationalState OperationalState
  shelfSecondaryState SecondaryState
  shelfMfgSite DisplayString
  shelfOscillatorType DisplayString

SlotEntry  
SEQUENCE    
  slotIndex Integer32
  slotEntityIndex PhysicalIndex
  slotType SlotType
  slotCardType CardType
  slotCardUnitName DisplayString
  slotCardFormatVersion DisplayString
  slotCardCLEICode DisplayString
  slotCardPartNumber DisplayString
  slotCardHwRev DisplayString
  slotCardSwRev DisplayString
  slotCardSerialNum DisplayString
  slotCardMfgName DisplayString
  slotCardMfgDate DateAndTime
  slotCardMfgSite DisplayString
  slotSecondaryState SecondaryState
  slotCardPhysicalAddress DisplayString

PsuEntry  
SEQUENCE    
  psuEntityIndex PhysicalIndex
  psuType PsuType
  psuAdminState AdminState
  psuOperationalState OperationalState
  psuSecondaryState SecondaryState
  psuOutputVoltage Integer32
  psuTemperature Integer32
  psuOutputCurrent Integer32
  psuStorageType StorageType
  psuRowStatus RowStatus

FanEntry  
SEQUENCE    
  fanEntityIndex PhysicalIndex
  fanAdminState AdminState
  fanOperationalState OperationalState
  fanSecondaryState SecondaryState
  fanStorageType StorageType
  fanRowStatus RowStatus

ScuEntry  
SEQUENCE    
  scuEntityIndex PhysicalIndex
  scuAdminState AdminState
  scuOperationalState OperationalState
  scuSecondaryState SecondaryState
  scuVoltage Integer32
  scuTemperature Integer32
  scuRestartAction RestartType
  scuStorageType StorageType
  scuRowStatus RowStatus
  scuFlashModelNum DisplayString
  scuFlashFirmwareRev DisplayString
  scuFlashSerialNum DisplayString

NemiEntry  
SEQUENCE    
  nemiEntityIndex PhysicalIndex
  nemiAdminState AdminState
  nemiOperationalState OperationalState
  nemiSecondaryState SecondaryState
  nemiVoltage Integer32
  nemiTemperature Integer32
  nemiRestartAction RestartType
  nemiStorageType StorageType
  nemiRowStatus RowStatus
  nemiForceOffLineAction TruthValue
  nemiFlashModelNum DisplayString
  nemiFlashFirmwareRev DisplayString
  nemiFlashSerialNum DisplayString

EthernetNTUCardEntry  
SEQUENCE    
  ethernetNTUCardEntityIndex PhysicalIndex
  ethernetNTUCardAdminState AdminState
  ethernetNTUCardOperationalState OperationalState
  ethernetNTUCardSecondaryState SecondaryState
  ethernetNTUCardVoltage Integer32
  ethernetNTUCardTemperature Integer32
  ethernetNTUCardSnmpDyingGaspEnabled TruthValue
  ethernetNTUCardRestartAction RestartType
  ethernetNTUCardStorageType StorageType
  ethernetNTUCardRowStatus RowStatus

EthernetCPMRCardEntry  
SEQUENCE    
  ethernetCPMRCardEntityIndex PhysicalIndex
  ethernetCPMRCardAdminState AdminState
  ethernetCPMRCardOperationalState OperationalState
  ethernetCPMRCardSecondaryState SecondaryState
  ethernetCPMRCardVoltage Integer32
  ethernetCPMRCardTemperature Integer32
  ethernetCPMRCardRestartAction RestartType
  ethernetCPMRCardPSU1State OperationalState
  ethernetCPMRCardPSU2State OperationalState
  ethernetCPMRCardFAN1State OperationalState
  ethernetCPMRCardFAN2State OperationalState
  ethernetCPMRCardPsuType PsuType
  ethernetCPMRCardLLFMode CmCPMRLinkLossFwdMode
  ethernetCPMRCardLLFModeAction CmCPMRLinkLossFwdMode

EthernetNTEGE101CardEntry  
SEQUENCE    
  ethernetNTEGE101CardEntityIndex PhysicalIndex
  ethernetNTEGE101CardAdminState AdminState
  ethernetNTEGE101CardOperationalState OperationalState
  ethernetNTEGE101CardSecondaryState SecondaryState
  ethernetNTEGE101CardVoltage Integer32
  ethernetNTEGE101CardTemperature Integer32
  ethernetNTEGE101CardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE101CardRestartAction RestartType

EthernetNTEGE206CardEntry  
SEQUENCE    
  ethernetNTEGE206CardEntityIndex PhysicalIndex
  ethernetNTEGE206CardAdminState AdminState
  ethernetNTEGE206CardOperationalState OperationalState
  ethernetNTEGE206CardSecondaryState SecondaryState
  ethernetNTEGE206CardVoltage Integer32
  ethernetNTEGE206CardTemperature Integer32
  ethernetNTEGE206CardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE206CardRestartAction RestartType
  ethernetNTEGE206CardFineGrainedPmInterval CmPmIntervalType

PseudoWireE3CardEntry  
SEQUENCE    
  pseudoWireE3CardEntityIndex PhysicalIndex
  pseudoWireE3CardAdminState AdminState
  pseudoWireE3CardOperationalState OperationalState
  pseudoWireE3CardSecondaryState SecondaryState
  pseudoWireE3CardIpAddress IpAddress
  pseudoWireE3CardIpNetmask IpAddress
  pseudoWireE3CardIpGateway IpAddress
  pseudoWireE3CardDhcpEnabled TruthValue
  pseudoWireE3CardMgmtVlanId VlanId
  pseudoWireE3CardTimeOfDay DateAndTime
  pseudoWireE3CardRestartAction RestartType

ScuTEntry  
SEQUENCE    
  scuTEntityIndex PhysicalIndex
  scuTAdminState AdminState
  scuTOperationalState OperationalState
  scuTSecondaryState SecondaryState
  scuTVoltage Integer32
  scuTTemperature Integer32
  scuTRestartAction RestartType
  scuTStorageType StorageType
  scuTRowStatus RowStatus

EthernetNTECardEntry  
SEQUENCE    
  ethernetNTECardEntityIndex PhysicalIndex
  ethernetNTECardAdminState AdminState
  ethernetNTECardOperationalState OperationalState
  ethernetNTECardSecondaryState SecondaryState
  ethernetNTECardVoltage Integer32
  ethernetNTECardTemperature Integer32
  ethernetNTECardSnmpDyingGaspEnabled TruthValue
  ethernetNTECardRestartAction RestartType
  ethernetNTECardStorageType StorageType
  ethernetNTECardRowStatus RowStatus

EthernetNTEGE201CardEntry  
SEQUENCE    
  ethernetNTEGE201CardEntityIndex PhysicalIndex
  ethernetNTEGE201CardAdminState AdminState
  ethernetNTEGE201CardOperationalState OperationalState
  ethernetNTEGE201CardSecondaryState SecondaryState
  ethernetNTEGE201CardVoltage Integer32
  ethernetNTEGE201CardTemperature Integer32
  ethernetNTEGE201CardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE201CardRestartAction RestartType
  ethernetNTEGE201CardFineGrainedPmInterval CmPmIntervalType

EthernetNTEGE201SyncECardEntry  
SEQUENCE    
  ethernetNTEGE201SyncECardEntityIndex PhysicalIndex
  ethernetNTEGE201SyncECardAdminState AdminState
  ethernetNTEGE201SyncECardOperationalState OperationalState
  ethernetNTEGE201SyncECardSecondaryState SecondaryState
  ethernetNTEGE201SyncECardVoltage Integer32
  ethernetNTEGE201SyncECardTemperature Integer32
  ethernetNTEGE201SyncECardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE201SyncECardRestartAction RestartType
  ethernetNTEGE201SyncECardFineGrainedPmInterval CmPmIntervalType

EthernetNTEGE206FCardEntry  
SEQUENCE    
  ethernetNTEGE206FCardEntityIndex PhysicalIndex
  ethernetNTEGE206FCardAdminState AdminState
  ethernetNTEGE206FCardOperationalState OperationalState
  ethernetNTEGE206FCardSecondaryState SecondaryState
  ethernetNTEGE206FCardVoltage Integer32
  ethernetNTEGE206FCardTemperature Integer32
  ethernetNTEGE206FCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE206FCardRestartAction RestartType
  ethernetNTEGE206FCardFineGrainedPmInterval CmPmIntervalType

Ethernet1x10GCardEntry  
SEQUENCE    
  ethernet1x10GCardEntityIndex PhysicalIndex
  ethernet1x10GCardAdminState AdminState
  ethernet1x10GCardOperationalState OperationalState
  ethernet1x10GCardSecondaryState SecondaryState
  ethernet1x10GCardTemperature Integer32
  ethernet1x10GCardSnmpDyingGaspEnabled TruthValue
  ethernet1x10GCardRestartAction RestartType
  ethernet1x10GCardStorageType StorageType
  ethernet1x10GCardRowStatus RowStatus
  ethernet1x10GCardForceOffLineAction TruthValue

Ethernet10x1GCardEntry  
SEQUENCE    
  ethernet10x1GCardEntityIndex PhysicalIndex
  ethernet10x1GCardAdminState AdminState
  ethernet10x1GCardOperationalState OperationalState
  ethernet10x1GCardSecondaryState SecondaryState
  ethernet10x1GCardTemperature Integer32
  ethernet10x1GCardSnmpDyingGaspEnabled TruthValue
  ethernet10x1GCardRestartAction RestartType
  ethernet10x1GCardStorageType StorageType
  ethernet10x1GCardRowStatus RowStatus
  ethernet10x1GCardForceOffLineAction TruthValue

EthernetSWFCardEntry  
SEQUENCE    
  ethernetSWFCardEntityIndex PhysicalIndex
  ethernetSWFCardAdminState AdminState
  ethernetSWFCardOperationalState OperationalState
  ethernetSWFCardSecondaryState SecondaryState
  ethernetSWFCardTemperature Integer32
  ethernetSWFCardRestartAction RestartType
  ethernetSWFCardStorageType StorageType
  ethernetSWFCardRowStatus RowStatus
  ethernetSWFCardForceOffLineAction TruthValue

StuCardEntry  
SEQUENCE    
  stuCardEntityIndex PhysicalIndex
  stuCardAdminState AdminState
  stuCardOperationalState OperationalState
  stuCardSecondaryState SecondaryState
  stuCardTemperature Integer32
  stuCardRestartAction RestartType
  stuCardStorageType StorageType
  stuCardRowStatus RowStatus
  stuCardForceOffLineAction TruthValue

AmiEntry  
SEQUENCE    
  amiEntityIndex PhysicalIndex
  amiAdminState AdminState
  amiOperationalState OperationalState
  amiSecondaryState SecondaryState
  amiTemperature Integer32
  amiRestartAction RestartType

StiEntry  
SEQUENCE    
  stiEntityIndex PhysicalIndex
  stiAdminState AdminState
  stiOperationalState OperationalState
  stiSecondaryState SecondaryState
  stiTemperature Integer32
  stiStorageType StorageType
  stiRowStatus RowStatus

F3UsbHostEntry  
SEQUENCE    
  f3UsbHostIndex PhysicalIndex
  f3UsbHostEntityIndex PhysicalIndex
  f3UsbHostUnitName DisplayString
  f3UsbHostFormatVersion DisplayString
  f3UsbHostCLEICode DisplayString
  f3UsbHostPartNumber DisplayString
  f3UsbHostHwRev DisplayString
  f3UsbHostSwRev DisplayString
  f3UsbHostSerialNum DisplayString
  f3UsbHostMfgName DisplayString
  f3UsbHostMfgDate DateAndTime
  f3UsbHostMfgSite DisplayString
  f3UsbHostSecondaryState SecondaryState
  f3UsbHostPhysicalAddress DisplayString

SwitchPortAction  
Switch port action.
TEXTUAL-CONVENTION    
  INTEGER not-applicable(0), switch(1)  

EthernetNTEGE112CardEntry  
SEQUENCE    
  ethernetNTEGE112CardEntityIndex PhysicalIndex
  ethernetNTEGE112CardAdminState AdminState
  ethernetNTEGE112CardOperationalState OperationalState
  ethernetNTEGE112CardSecondaryState SecondaryState
  ethernetNTEGE112CardVoltage Integer32
  ethernetNTEGE112CardTemperature Integer32
  ethernetNTEGE112CardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE112CardRestartAction RestartType
  ethernetNTEGE112CardFineGrainedPmInterval CmPmIntervalType
  ethernetNTEGE112CardSwitchPortActionPort VariablePointer
  ethernetNTEGE112CardSwitchPortAction SwitchPortAction

EthernetNTEGE114CardEntry  
SEQUENCE    
  ethernetNTEGE114CardEntityIndex PhysicalIndex
  ethernetNTEGE114CardAdminState AdminState
  ethernetNTEGE114CardOperationalState OperationalState
  ethernetNTEGE114CardSecondaryState SecondaryState
  ethernetNTEGE114CardVoltage Integer32
  ethernetNTEGE114CardTemperature Integer32
  ethernetNTEGE114CardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE114CardRestartAction RestartType
  ethernetNTEGE114CardFineGrainedPmInterval CmPmIntervalType
  ethernetNTEGE114CardSwitchPortActionPort VariablePointer
  ethernetNTEGE114CardSwitchPortAction SwitchPortAction

EthernetNTEGE206VCardEntry  
SEQUENCE    
  ethernetNTEGE206VCardEntityIndex PhysicalIndex
  ethernetNTEGE206VCardAdminState AdminState
  ethernetNTEGE206VCardOperationalState OperationalState
  ethernetNTEGE206VCardSecondaryState SecondaryState
  ethernetNTEGE206VCardVoltage Integer32
  ethernetNTEGE206VCardTemperature Integer32
  ethernetNTEGE206VCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE206VCardRestartAction RestartType
  ethernetNTEGE206VCardFineGrainedPmInterval CmPmIntervalType

EthernetGE4SCCCardEntry  
SEQUENCE    
  ethernetGE4SCCCardEntityIndex PhysicalIndex
  ethernetGE4SCCCardAdminState AdminState
  ethernetGE4SCCCardOperationalState OperationalState
  ethernetGE4SCCCardSecondaryState SecondaryState
  ethernetGE4SCCCardVoltage Integer32
  ethernetGE4SCCCardTemperature Integer32
  ethernetGE4SCCCardRestartAction RestartType
  ethernetGE4SCCCardStorageType StorageType
  ethernetGE4SCCCardRowStatus RowStatus

EthernetGE4ECCCardEntry  
SEQUENCE    
  ethernetGE4ECCCardEntityIndex PhysicalIndex
  ethernetGE4ECCCardAdminState AdminState
  ethernetGE4ECCCardOperationalState OperationalState
  ethernetGE4ECCCardSecondaryState SecondaryState
  ethernetGE4ECCCardVoltage Integer32
  ethernetGE4ECCCardTemperature Integer32
  ethernetGE4ECCCardRestartAction RestartType
  ethernetGE4ECCCardStorageType StorageType
  ethernetGE4ECCCardRowStatus RowStatus

EthernetNTEXG210CardEntry  
SEQUENCE    
  ethernetNTEXG210CardEntityIndex PhysicalIndex
  ethernetNTEXG210CardAdminState AdminState
  ethernetNTEXG210CardOperationalState OperationalState
  ethernetNTEXG210CardSecondaryState SecondaryState
  ethernetNTEXG210CardVoltage Integer32
  ethernetNTEXG210CardTemperature Integer32
  ethernetNTEXG210CardSnmpDyingGaspEnabled TruthValue
  ethernetNTEXG210CardRestartAction RestartType
  ethernetNTEXG210CardFineGrainedPmInterval CmPmIntervalType

EthernetXG1XCCCardEntry  
SEQUENCE    
  ethernetXG1XCCCardEntityIndex PhysicalIndex
  ethernetXG1XCCCardAdminState AdminState
  ethernetXG1XCCCardOperationalState OperationalState
  ethernetXG1XCCCardSecondaryState SecondaryState
  ethernetXG1XCCCardVoltage Integer32
  ethernetXG1XCCCardTemperature Integer32
  ethernetXG1XCCCardRestartAction RestartType
  ethernetXG1XCCCardStorageType StorageType
  ethernetXG1XCCCardRowStatus RowStatus

EthernetXG1SCCCardEntry  
SEQUENCE    
  ethernetXG1SCCCardEntityIndex PhysicalIndex
  ethernetXG1SCCCardAdminState AdminState
  ethernetXG1SCCCardOperationalState OperationalState
  ethernetXG1SCCCardSecondaryState SecondaryState
  ethernetXG1SCCCardVoltage Integer32
  ethernetXG1SCCCardTemperature Integer32
  ethernetXG1SCCCardRestartAction RestartType
  ethernetXG1SCCCardStorageType StorageType
  ethernetXG1SCCCardRowStatus RowStatus

PortCarrierType  
This attribute is to show/set the SONET/SDH mode and OC3/OC12/STM1/STM4 speed for SONET/SDH.
TEXTUAL-CONVENTION    
  INTEGER not-applicable(0), t1(1), e1(2), t3(3), e3(4), oc3(5), oc12(6), stm1(7), stm4(8)  

EthernetOverOCSTMCardEntry  
SEQUENCE    
  ethernetOverOCSTMCardEntityIndex PhysicalIndex
  ethernetOverOCSTMCardAdminState AdminState
  ethernetOverOCSTMCardOperationalState OperationalState
  ethernetOverOCSTMCardSecondaryState SecondaryState
  ethernetOverOCSTMCardTemperature Integer32
  ethernetOverOCSTMCardSnmpDyingGaspEnabled TruthValue
  ethernetOverOCSTMCardRestartAction RestartType
  ethernetOverOCSTMCardStorageType StorageType
  ethernetOverOCSTMCardRowStatus RowStatus
  ethernetOverOCSTMCardForceOffLineAction TruthValue
  ethernetOverOCSTMCardMode PortCarrierType

PseudoWireOcnStmCardEntry  
SEQUENCE    
  pseudoWireOcnStmCardEntityIndex PhysicalIndex
  pseudoWireOcnStmCardAdminState AdminState
  pseudoWireOcnStmCardOperationalState OperationalState
  pseudoWireOcnStmCardSecondaryState SecondaryState
  pseudoWireOcnStmCardIpAddress IpAddress
  pseudoWireOcnStmCardMode PWE3OCNSTMCardMode
  pseudoWireOcnStmCardVoltage Integer32
  pseudoWireOcnStmCardTemperature Integer32
  pseudoWireOcnStmCardRestartAction RestartType
  pseudoWireOcnStmCardStorageType StorageType
  pseudoWireOcnStmCardRowStatus RowStatus
  pseudoWireOcnStmCardPSNEncapsulation PSNEncapsulationMode
  pseudoWireOcnStmCardFreqSourceType TDMFrequencySourceType
  pseudoWireOcnStmCardFreqSource VariablePointer
  pseudoWireOcnStmCardForceOffLineAction TruthValue

PseudoWireE1T1CardEntry  
SEQUENCE    
  pseudoWireE1T1CardEntityIndex PhysicalIndex
  pseudoWireE1T1CardAdminState AdminState
  pseudoWireE1T1CardOperationalState OperationalState
  pseudoWireE1T1CardSecondaryState SecondaryState
  pseudoWireE1T1CardIpAddress IpAddress
  pseudoWireE1T1CardMode PWE3E1T1CardMode
  pseudoWireE1T1CardVoltage Integer32
  pseudoWireE1T1CardTemperature Integer32
  pseudoWireE1T1CardRestartAction RestartType
  pseudoWireE1T1CardStorageType StorageType
  pseudoWireE1T1CardRowStatus RowStatus
  pseudoWireE1T1CardPSNEncapsulation PSNEncapsulationMode

Ethernet1x10GHighPerCardEntry  
SEQUENCE    
  ethernet1x10GHighPerCardEntityIndex PhysicalIndex
  ethernet1x10GHighPerCardAdminState AdminState
  ethernet1x10GHighPerCardOperationalState OperationalState
  ethernet1x10GHighPerCardSecondaryState SecondaryState
  ethernet1x10GHighPerCardTemperature Integer32
  ethernet1x10GHighPerCardSnmpDyingGaspEnabled TruthValue
  ethernet1x10GHighPerCardRestartAction RestartType
  ethernet1x10GHighPerCardStorageType StorageType
  ethernet1x10GHighPerCardRowStatus RowStatus
  ethernet1x10GHighPerCardForceOffLineAction TruthValue

Ethernet10x1GHighPerCardEntry  
SEQUENCE    
  ethernet10x1GHighPerCardEntityIndex PhysicalIndex
  ethernet10x1GHighPerCardAdminState AdminState
  ethernet10x1GHighPerCardOperationalState OperationalState
  ethernet10x1GHighPerCardSecondaryState SecondaryState
  ethernet10x1GHighPerCardTemperature Integer32
  ethernet10x1GHighPerCardSnmpDyingGaspEnabled TruthValue
  ethernet10x1GHighPerCardRestartAction RestartType
  ethernet10x1GHighPerCardStorageType StorageType
  ethernet10x1GHighPerCardRowStatus RowStatus
  ethernet10x1GHighPerCardForceOffLineAction TruthValue

EthernetNTET1804CardEntry  
SEQUENCE    
  ethernetNTET1804CardEntityIndex PhysicalIndex
  ethernetNTET1804CardAdminState AdminState
  ethernetNTET1804CardOperationalState OperationalState
  ethernetNTET1804CardSecondaryState SecondaryState
  ethernetNTET1804CardVoltage Integer32
  ethernetNTET1804CardTemperature Integer32
  ethernetNTET1804CardSnmpDyingGaspEnabled TruthValue
  ethernetNTET1804CardRestartAction RestartType
  ethernetNTET1804CardFineGrainedPmInterval CmPmIntervalType
  ethernetNTET1804CardMode PortCarrierType

EthernetNTET3204CardEntry  
SEQUENCE    
  ethernetNTET3204CardEntityIndex PhysicalIndex
  ethernetNTET3204CardAdminState AdminState
  ethernetNTET3204CardOperationalState OperationalState
  ethernetNTET3204CardSecondaryState SecondaryState
  ethernetNTET3204CardVoltage Integer32
  ethernetNTET3204CardTemperature Integer32
  ethernetNTET3204CardSnmpDyingGaspEnabled TruthValue
  ethernetNTET3204CardRestartAction RestartType
  ethernetNTET3204CardFineGrainedPmInterval CmPmIntervalType
  ethernetNTET3204CardMode PortCarrierType

EthernetNTEGESyncProbeCardEntry  
SEQUENCE    
  ethernetNTEGESyncProbeCardEntityIndex PhysicalIndex
  ethernetNTEGESyncProbeCardAdminState AdminState
  ethernetNTEGESyncProbeCardOperationalState OperationalState
  ethernetNTEGESyncProbeCardSecondaryState SecondaryState
  ethernetNTEGESyncProbeCardVoltage Integer32
  ethernetNTEGESyncProbeCardTemperature Integer32
  ethernetNTEGESyncProbeCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGESyncProbeCardRestartAction RestartType
  ethernetNTEGESyncProbeCardFineGrainedPmInterval CmPmIntervalType

EthernetGE8SCCCardEntry  
SEQUENCE    
  ethernetGE8SCCCardEntityIndex PhysicalIndex
  ethernetGE8SCCCardAdminState AdminState
  ethernetGE8SCCCardOperationalState OperationalState
  ethernetGE8SCCCardSecondaryState SecondaryState
  ethernetGE8SCCCardVoltage Integer32
  ethernetGE8SCCCardTemperature Integer32
  ethernetGE8SCCCardRestartAction RestartType
  ethernetGE8SCCCardStorageType StorageType
  ethernetGE8SCCCardRowStatus RowStatus

EthernetNTEGE114HCardEntry  
SEQUENCE    
  ethernetNTEGE114HCardEntityIndex PhysicalIndex
  ethernetNTEGE114HCardAdminState AdminState
  ethernetNTEGE114HCardOperationalState OperationalState
  ethernetNTEGE114HCardSecondaryState SecondaryState
  ethernetNTEGE114HCardVoltage Integer32
  ethernetNTEGE114HCardTemperature Integer32
  ethernetNTEGE114HCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE114HCardRestartAction RestartType
  ethernetNTEGE114HCardFineGrainedPmInterval CmPmIntervalType
  ethernetNTEGE114HCardSwitchPortActionPort VariablePointer
  ethernetNTEGE114HCardSwitchPortAction SwitchPortAction

EthernetNTEGE114PHCardEntry  
SEQUENCE    
  ethernetNTEGE114PHCardEntityIndex PhysicalIndex
  ethernetNTEGE114PHCardAdminState AdminState
  ethernetNTEGE114PHCardOperationalState OperationalState
  ethernetNTEGE114PHCardSecondaryState SecondaryState
  ethernetNTEGE114PHCardVoltage Integer32
  ethernetNTEGE114PHCardTemperature Integer32
  ethernetNTEGE114PHCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE114PHCardRestartAction RestartType
  ethernetNTEGE114PHCardFineGrainedPmInterval CmPmIntervalType
  ethernetNTEGE114PHCardSwitchPortActionPort VariablePointer
  ethernetNTEGE114PHCardSwitchPortAction SwitchPortAction

EthernetFE36ECardEntry  
SEQUENCE    
  ethernetFE36ECardEntityIndex PhysicalIndex
  ethernetFE36ECardAdminState AdminState
  ethernetFE36ECardOperationalState OperationalState
  ethernetFE36ECardSecondaryState SecondaryState
  ethernetFE36ECardTemperature Integer32
  ethernetFE36ECardRestartAction RestartType
  ethernetFE36ECardStorageType StorageType
  ethernetFE36ECardRowStatus RowStatus
  ethernetFE36ECardForceOffLineAction TruthValue
  ethernetFE36ECard8023azEnabled TruthValue

EthernetNTEGE114SHCardEntry  
SEQUENCE    
  ethernetNTEGE114SHCardEntityIndex PhysicalIndex
  ethernetNTEGE114SHCardAdminState AdminState
  ethernetNTEGE114SHCardOperationalState OperationalState
  ethernetNTEGE114SHCardSecondaryState SecondaryState
  ethernetNTEGE114SHCardVoltage Integer32
  ethernetNTEGE114SHCardTemperature Integer32
  ethernetNTEGE114SHCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE114SHCardRestartAction RestartType
  ethernetNTEGE114SHCardFineGrainedPmInterval CmPmIntervalType
  ethernetNTEGE114SHCardSwitchPortActionPort VariablePointer
  ethernetNTEGE114SHCardSwitchPortAction SwitchPortAction

EthernetNTEGE114SCardEntry  
SEQUENCE    
  ethernetNTEGE114SCardEntityIndex PhysicalIndex
  ethernetNTEGE114SCardAdminState AdminState
  ethernetNTEGE114SCardOperationalState OperationalState
  ethernetNTEGE114SCardSecondaryState SecondaryState
  ethernetNTEGE114SCardVoltage Integer32
  ethernetNTEGE114SCardTemperature Integer32
  ethernetNTEGE114SCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE114SCardRestartAction RestartType
  ethernetNTEGE114SCardFineGrainedPmInterval CmPmIntervalType
  ethernetNTEGE114SCardSwitchPortActionPort VariablePointer
  ethernetNTEGE114SCardSwitchPortAction SwitchPortAction

StuHighPerCardEntry  
SEQUENCE    
  stuHighPerCardEntityIndex PhysicalIndex
  stuHighPerCardAdminState AdminState
  stuHighPerCardOperationalState OperationalState
  stuHighPerCardSecondaryState SecondaryState
  stuHighPerCardTemperature Integer32
  stuHighPerCardRestartAction RestartType
  stuHighPerCardStorageType StorageType
  stuHighPerCardRowStatus RowStatus
  stuHighPerCardForceOffLineAction TruthValue

StiHighPerEntry  
SEQUENCE    
  stiHighPerEntityIndex PhysicalIndex
  stiHighPerAdminState AdminState
  stiHighPerOperationalState OperationalState
  stiHighPerSecondaryState SecondaryState
  stiHighPerTemperature Integer32
  stiHighPerStorageType StorageType
  stiHighPerRowStatus RowStatus

EthernetGE8ECCCardEntry  
SEQUENCE    
  ethernetGE8ECCCardEntityIndex PhysicalIndex
  ethernetGE8ECCCardAdminState AdminState
  ethernetGE8ECCCardOperationalState OperationalState
  ethernetGE8ECCCardSecondaryState SecondaryState
  ethernetGE8ECCCardVoltage Integer32
  ethernetGE8ECCCardTemperature Integer32
  ethernetGE8ECCCardRestartAction RestartType
  ethernetGE8ECCCardStorageType StorageType
  ethernetGE8ECCCardRowStatus RowStatus

NetworkElementLLDPParamsEntry  
SEQUENCE    
  neLLDPParamsLLDPEnableAction LLDPEnableAction

EthernetNTESH1PCSCardEntry  
SEQUENCE    
  ethernetNTESH1PCSCardEntityIndex PhysicalIndex
  ethernetNTESH1PCSCardAdminState AdminState
  ethernetNTESH1PCSCardOperationalState OperationalState
  ethernetNTESH1PCSCardSecondaryState SecondaryState
  ethernetNTESH1PCSCardVoltage Integer32
  ethernetNTESH1PCSCardTemperature Integer32
  ethernetNTESH1PCSCardSnmpDyingGaspEnabled TruthValue
  ethernetNTESH1PCSCardRestartAction RestartType
  ethernetNTESH1PCSCardFineGrainedPmInterval CmPmIntervalType

EthernetNTEOSA5411CardEntry  
SEQUENCE    
  ethernetNTEOSA5411CardEntityIndex PhysicalIndex
  ethernetNTEOSA5411CardAdminState AdminState
  ethernetNTEOSA5411CardOperationalState OperationalState
  ethernetNTEOSA5411CardSecondaryState SecondaryState
  ethernetNTEOSA5411CardVoltage Integer32
  ethernetNTEOSA5411CardTemperature Integer32
  ethernetNTEOSA5411CardSnmpDyingGaspEnabled TruthValue
  ethernetNTEOSA5411CardRestartAction RestartType
  ethernetNTEOSA5411CardFineGrainedPmInterval CmPmIntervalType

EthernetNTEGE112ProCardEntry  
SEQUENCE    
  ethernetNTEGE112ProCardEntityIndex PhysicalIndex
  ethernetNTEGE112ProCardAdminState AdminState
  ethernetNTEGE112ProCardOperationalState OperationalState
  ethernetNTEGE112ProCardSecondaryState SecondaryState
  ethernetNTEGE112ProCardVoltage Integer32
  ethernetNTEGE112ProCardTemperature Integer32
  ethernetNTEGE112ProCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE112ProCardRestartAction RestartType
  ethernetNTEGE112ProCardFineGrainedPmInterval CmPmIntervalType
  ethernetNTEGE112ProCardSwitchPortActionPort VariablePointer
  ethernetNTEGE112ProCardSwitchPortAction SwitchPortAction

EthernetNTEGE112ProMCardEntry  
SEQUENCE    
  ethernetNTEGE112ProMCardEntityIndex PhysicalIndex
  ethernetNTEGE112ProMCardAdminState AdminState
  ethernetNTEGE112ProMCardOperationalState OperationalState
  ethernetNTEGE112ProMCardSecondaryState SecondaryState
  ethernetNTEGE112ProMCardVoltage Integer32
  ethernetNTEGE112ProMCardTemperature Integer32
  ethernetNTEGE112ProMCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE112ProMCardRestartAction RestartType
  ethernetNTEGE112ProMCardFineGrainedPmInterval CmPmIntervalType
  ethernetNTEGE112ProMCardSwitchPortActionPort VariablePointer
  ethernetNTEGE112ProMCardSwitchPortAction SwitchPortAction

EthernetNTEXG210CCardEntry  
SEQUENCE    
  ethernetNTEXG210CCardEntityIndex PhysicalIndex
  ethernetNTEXG210CCardAdminState AdminState
  ethernetNTEXG210CCardOperationalState OperationalState
  ethernetNTEXG210CCardSecondaryState SecondaryState
  ethernetNTEXG210CCardVoltage Integer32
  ethernetNTEXG210CCardTemperature Integer32
  ethernetNTEXG210CCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEXG210CCardRestartAction RestartType
  ethernetNTEXG210CCardFineGrainedPmInterval CmPmIntervalType

EthernetGE8SCryptoConnectorCardEntry  
SEQUENCE    
  ethernetGE8SCryptoConnectorCardEntityIndex PhysicalIndex
  ethernetGE8SCryptoConnectorCardAdminState AdminState
  ethernetGE8SCryptoConnectorCardOperationalState OperationalState
  ethernetGE8SCryptoConnectorCardSecondaryState SecondaryState
  ethernetGE8SCryptoConnectorCardVoltage Integer32
  ethernetGE8SCryptoConnectorCardTemperature Integer32
  ethernetGE8SCryptoConnectorCardRestartAction RestartType
  ethernetGE8SCryptoConnectorCardStorageType StorageType
  ethernetGE8SCryptoConnectorCardRowStatus RowStatus

EthernetNTEGE114ProCardEntry  
SEQUENCE    
  ethernetNTEGE114ProCardEntityIndex PhysicalIndex
  ethernetNTEGE114ProCardAdminState AdminState
  ethernetNTEGE114ProCardOperationalState OperationalState
  ethernetNTEGE114ProCardSecondaryState SecondaryState
  ethernetNTEGE114ProCardVoltage Integer32
  ethernetNTEGE114ProCardTemperature Integer32
  ethernetNTEGE114ProCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE114ProCardRestartAction RestartType
  ethernetNTEGE114ProCardFineGrainedPmInterval CmPmIntervalType
  ethernetNTEGE114ProCardSwitchPortActionPort VariablePointer
  ethernetNTEGE114ProCardSwitchPortAction SwitchPortAction

EthernetNTEGE114ProCCardEntry  
SEQUENCE    
  ethernetNTEGE114ProCCardEntityIndex PhysicalIndex
  ethernetNTEGE114ProCCardAdminState AdminState
  ethernetNTEGE114ProCCardOperationalState OperationalState
  ethernetNTEGE114ProCCardSecondaryState SecondaryState
  ethernetNTEGE114ProCCardVoltage Integer32
  ethernetNTEGE114ProCCardTemperature Integer32
  ethernetNTEGE114ProCCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE114ProCCardRestartAction RestartType
  ethernetNTEGE114ProCCardFineGrainedPmInterval CmPmIntervalType
  ethernetNTEGE114ProCCardSwitchPortActionPort VariablePointer
  ethernetNTEGE114ProCCardSwitchPortAction SwitchPortAction

EthernetNTEGE114ProSHCardEntry  
SEQUENCE    
  ethernetNTEGE114ProSHCardEntityIndex PhysicalIndex
  ethernetNTEGE114ProSHCardAdminState AdminState
  ethernetNTEGE114ProSHCardOperationalState OperationalState
  ethernetNTEGE114ProSHCardSecondaryState SecondaryState
  ethernetNTEGE114ProSHCardVoltage Integer32
  ethernetNTEGE114ProSHCardTemperature Integer32
  ethernetNTEGE114ProSHCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE114ProSHCardRestartAction RestartType
  ethernetNTEGE114ProSHCardFineGrainedPmInterval CmPmIntervalType
  ethernetNTEGE114ProSHCardSwitchPortActionPort VariablePointer
  ethernetNTEGE114ProSHCardSwitchPortAction SwitchPortAction

EthernetNTEGE114ProCSHCardEntry  
SEQUENCE    
  ethernetNTEGE114ProCSHCardEntityIndex PhysicalIndex
  ethernetNTEGE114ProCSHCardAdminState AdminState
  ethernetNTEGE114ProCSHCardOperationalState OperationalState
  ethernetNTEGE114ProCSHCardSecondaryState SecondaryState
  ethernetNTEGE114ProCSHCardVoltage Integer32
  ethernetNTEGE114ProCSHCardTemperature Integer32
  ethernetNTEGE114ProCSHCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE114ProCSHCardRestartAction RestartType
  ethernetNTEGE114ProCSHCardFineGrainedPmInterval CmPmIntervalType
  ethernetNTEGE114ProCSHCardSwitchPortActionPort VariablePointer
  ethernetNTEGE114ProCSHCardSwitchPortAction SwitchPortAction

EthernetNTEGE114ProHECardEntry  
SEQUENCE    
  ethernetNTEGE114ProHECardEntityIndex PhysicalIndex
  ethernetNTEGE114ProHECardAdminState AdminState
  ethernetNTEGE114ProHECardOperationalState OperationalState
  ethernetNTEGE114ProHECardSecondaryState SecondaryState
  ethernetNTEGE114ProHECardVoltage Integer32
  ethernetNTEGE114ProHECardTemperature Integer32
  ethernetNTEGE114ProHECardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE114ProHECardRestartAction RestartType
  ethernetNTEGE114ProHECardFineGrainedPmInterval CmPmIntervalType
  ethernetNTEGE114ProHECardSwitchPortActionPort VariablePointer
  ethernetNTEGE114ProHECardSwitchPortAction SwitchPortAction

EthernetNTEGE112ProHCardEntry  
SEQUENCE    
  ethernetNTEGE112ProHCardEntityIndex PhysicalIndex
  ethernetNTEGE112ProHCardAdminState AdminState
  ethernetNTEGE112ProHCardOperationalState OperationalState
  ethernetNTEGE112ProHCardSecondaryState SecondaryState
  ethernetNTEGE112ProHCardVoltage Integer32
  ethernetNTEGE112ProHCardTemperature Integer32
  ethernetNTEGE112ProHCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE112ProHCardRestartAction RestartType
  ethernetNTEGE112ProHCardFineGrainedPmInterval CmPmIntervalType
  ethernetNTEGE112ProHCardSwitchPortActionPort VariablePointer
  ethernetNTEGE112ProHCardSwitchPortAction SwitchPortAction

EthernetNTEOSA5420CardEntry  
SEQUENCE    
  ethernetNTEOSA5420CardEntityIndex PhysicalIndex
  ethernetNTEOSA5420CardAdminState AdminState
  ethernetNTEOSA5420CardOperationalState OperationalState
  ethernetNTEOSA5420CardSecondaryState SecondaryState
  ethernetNTEOSA5420CardVoltage Integer32
  ethernetNTEOSA5420CardTemperature Integer32
  ethernetNTEOSA5420CardSnmpDyingGaspEnabled TruthValue
  ethernetNTEOSA5420CardRestartAction RestartType
  ethernetNTEOSA5420CardFineGrainedPmInterval CmPmIntervalType

EthernetNTEOSA5421CardEntry  
SEQUENCE    
  ethernetNTEOSA5421CardEntityIndex PhysicalIndex
  ethernetNTEOSA5421CardAdminState AdminState
  ethernetNTEOSA5421CardOperationalState OperationalState
  ethernetNTEOSA5421CardSecondaryState SecondaryState
  ethernetNTEOSA5421CardVoltage Integer32
  ethernetNTEOSA5421CardTemperature Integer32
  ethernetNTEOSA5421CardSnmpDyingGaspEnabled TruthValue
  ethernetNTEOSA5421CardRestartAction RestartType
  ethernetNTEOSA5421CardFineGrainedPmInterval CmPmIntervalType

EthernetNTEGE114GCardEntry  
SEQUENCE    
  ethernetNTEGE114GCardEntityIndex PhysicalIndex
  ethernetNTEGE114GCardAdminState AdminState
  ethernetNTEGE114GCardOperationalState OperationalState
  ethernetNTEGE114GCardSecondaryState SecondaryState
  ethernetNTEGE114GCardVoltage Integer32
  ethernetNTEGE114GCardTemperature Integer32
  ethernetNTEGE114GCardSnmpDyingGaspEnabled TruthValue
  ethernetNTEGE114GCardRestartAction RestartType
  ethernetNTEGE114GCardFineGrainedPmInterval CmPmIntervalType
  ethernetNTEGE114GCardSwitchPortActionPort VariablePointer
  ethernetNTEGE114GCardSwitchPortAction SwitchPortAction

Defined Values

cmEntityMIB 1.3.6.1.4.1.2544.1.12.3
This module defines the Entity MIB definitions used by the F3 (FSP150CM/CC) product lines. These definitions are vendor specific extensions to the standard ENTITY MIB (RFC2737). Copyright (C) ADVA Optical Networking.
MODULE-IDENTITY    

cmEntityObjects 1.3.6.1.4.1.2544.1.12.3.1
OBJECT IDENTIFIER    

cmEntityConformance 1.3.6.1.4.1.2544.1.12.3.2
OBJECT IDENTIFIER    

networkElementTable 1.3.6.1.4.1.2544.1.12.3.1.1
Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NetworkElementEntry

networkElementEntry 1.3.6.1.4.1.2544.1.12.3.1.1.1
A conceptual row in the networkElementTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NetworkElementEntry  

neIndex 1.3.6.1.4.1.2544.1.12.3.1.1.1.1
An arbitrary integer index value used to uniquely identify a NetworkElement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

neName 1.3.6.1.4.1.2544.1.12.3.1.1.1.2
An administratively-assigned name for the Network Element. By convention, this is the node's fully-qualified domain name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..256)  

neType 1.3.6.1.4.1.2544.1.12.3.1.1.1.3
Type of Network Element.
Status: current Access: read-create
OBJECT-TYPE    
  NetworkElementType  

neContact 1.3.6.1.4.1.2544.1.12.3.1.1.1.4
The textual identification of the contact person for the Network Element, together with information on how to contact this person.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..256)  

neLocation 1.3.6.1.4.1.2544.1.12.3.1.1.1.5
The physical location of this node (e.g., `telephone closet, 3rd floor').
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..256)  

neDescription 1.3.6.1.4.1.2544.1.12.3.1.1.1.6
A textual description of the Network Element. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

neCmdPromptPrefix 1.3.6.1.4.1.2544.1.12.3.1.1.1.7
User specified command prompt prefix, used by the CLI, at the Network Element level.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

neAccepted 1.3.6.1.4.1.2544.1.12.3.1.1.1.8
Indicates whether or not the Network Element is accepted or not. When the system's autoProvMode(CM-SYSTEM-MIB) is 'confirm', NetworkElement's are discovered with this object as 'false'. User must invoke the 'accept' action on neProvAction object to accept the NetworkElement.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

neFromPort 1.3.6.1.4.1.2544.1.12.3.1.1.1.9
The Network Element port to which this Network Element is connected.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

neProvAction 1.3.6.1.4.1.2544.1.12.3.1.1.1.10
When the system's autoProvMode(CM-SYSTEM-MIB) is 'confirm', NetworkElement's are discovered with 'neAccepted' object as 'false'. User must invoke the 'accept' action on this object to accept the NetworkElement. User can invoke the 'decline' action on this object to decline the NetworkElement.
Status: current Access: read-write
OBJECT-TYPE    
  NeProvAction  

neStorageType 1.3.6.1.4.1.2544.1.12.3.1.1.1.11
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

neRowStatus 1.3.6.1.4.1.2544.1.12.3.1.1.1.12
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of neRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The neRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

neAutoProvMode 1.3.6.1.4.1.2544.1.12.3.1.1.1.13
Autoprovisioning mode which controls automatic creation of cards plugged into the slots of Network Element. Supported values are off(1) and auto(3). When neAutoProvMode is auto then the cards inserted into the slots of Network Element will be automatically provisioned. When neAutoProvMode is off no auto-provisioning will occur.
Status: current Access: read-create
OBJECT-TYPE    
  CmAutoProvMode  

neFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.1.1.14
Allows specification of the fine-grained PM interval at the Network Element level. Value of this objec is propagated to all the cards beloning to the Network Element. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

shelfTable 1.3.6.1.4.1.2544.1.12.3.1.2
Contains information on shelf within the NetworkElement. In the case of FSP150CM, there is a single shelf for each NetworkElement.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ShelfEntry

shelfEntry 1.3.6.1.4.1.2544.1.12.3.1.2.1
A conceptual row in the shelfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ShelfEntry  

shelfIndex 1.3.6.1.4.1.2544.1.12.3.1.2.1.1
An integer index value used to uniquely identify a Shelf within a NetworkElement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

shelfEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.2.1.2
Entity Index from ENTITY-MIB for this shelf.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

shelfType 1.3.6.1.4.1.2544.1.12.3.1.2.1.3
Shelf Type of the shelf.
Status: current Access: read-write
OBJECT-TYPE    
  ShelfType  

shelfbackplaneRev 1.3.6.1.4.1.2544.1.12.3.1.2.1.4
The backplane revision number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

shelfbackplaneDOM 1.3.6.1.4.1.2544.1.12.3.1.2.1.5
Backplane Date of Manufacture.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

shelfbackplaneSerialNo 1.3.6.1.4.1.2544.1.12.3.1.2.1.6
Backplane Serial Number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

shelfAction 1.3.6.1.4.1.2544.1.12.3.1.2.1.7
Invoke action on the shelf, such as lamp test.
Status: current Access: read-write
OBJECT-TYPE    
  ShelfAction  

shelfAdminState 1.3.6.1.4.1.2544.1.12.3.1.2.1.8
Administrative State of the Shelf.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

shelfOperationalState 1.3.6.1.4.1.2544.1.12.3.1.2.1.9
Operational State of the Shelf.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

shelfSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.2.1.10
Secondary State of the Shelf.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

shelfMfgSite 1.3.6.1.4.1.2544.1.12.3.1.2.1.11
This is the shelf's Manufacturer site.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

shelfOscillatorType 1.3.6.1.4.1.2544.1.12.3.1.2.1.12
The mOscillatorType.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

slotTable 1.3.6.1.4.1.2544.1.12.3.1.3
Contains information on slot within the Shelf.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlotEntry

slotEntry 1.3.6.1.4.1.2544.1.12.3.1.3.1
A conceptual row in the slotTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlotEntry  

slotIndex 1.3.6.1.4.1.2544.1.12.3.1.3.1.1
The actual physical slot index that uniquely identify a Slot within a shelf. Slot number 255 is used to indicate system level entities.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slotEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.3.1.2
Entity Index from ENTITY-MIB for this slot.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

slotType 1.3.6.1.4.1.2544.1.12.3.1.3.1.3
Slot Type of the slot. 'generic' slots can hold NEMI card as well as line cards.
Status: current Access: read-only
OBJECT-TYPE    
  SlotType  

slotCardType 1.3.6.1.4.1.2544.1.12.3.1.3.1.4
Card Type of the slot.
Status: current Access: read-only
OBJECT-TYPE    
  CardType  

slotCardUnitName 1.3.6.1.4.1.2544.1.12.3.1.3.1.5
This is the inserted card's unit name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

slotCardFormatVersion 1.3.6.1.4.1.2544.1.12.3.1.3.1.6
This is the inserted card's format version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

slotCardCLEICode 1.3.6.1.4.1.2544.1.12.3.1.3.1.7
This is the inserted card's CLEI code.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

slotCardPartNumber 1.3.6.1.4.1.2544.1.12.3.1.3.1.8
This is the inserted card's Part Number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slotCardHwRev 1.3.6.1.4.1.2544.1.12.3.1.3.1.9
This is the inserted card's Hardware Revision.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

slotCardSwRev 1.3.6.1.4.1.2544.1.12.3.1.3.1.10
This is the inserted card's Software Revision.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

slotCardSerialNum 1.3.6.1.4.1.2544.1.12.3.1.3.1.11
This is the inserted card's Serial Number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slotCardMfgName 1.3.6.1.4.1.2544.1.12.3.1.3.1.12
This is the inserted card's Manufacturer Name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

slotCardMfgDate 1.3.6.1.4.1.2544.1.12.3.1.3.1.13
This is the inserted card's Manufacturer date.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

slotCardMfgSite 1.3.6.1.4.1.2544.1.12.3.1.3.1.14
This is the inserted card's Manufacturer site.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

slotSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.3.1.15
Secondary State of the Slot.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

slotCardPhysicalAddress 1.3.6.1.4.1.2544.1.12.3.1.3.1.16
This is the inserted card's MAC Address, if applicable.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

psuTable 1.3.6.1.4.1.2544.1.12.3.1.4
Contains information on Power Supply Units within the Shelf.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PsuEntry

psuEntry 1.3.6.1.4.1.2544.1.12.3.1.4.1
A conceptual row in the psuTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PsuEntry  

psuEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.4.1.1
Entity Index from ENTITY-MIB for this PSU.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

psuType 1.3.6.1.4.1.2544.1.12.3.1.4.1.2
PSU Type of the PSU.
Status: current Access: read-only
OBJECT-TYPE    
  PsuType  

psuAdminState 1.3.6.1.4.1.2544.1.12.3.1.4.1.3
Administrative State of the PSU.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

psuOperationalState 1.3.6.1.4.1.2544.1.12.3.1.4.1.4
Operational State of the PSU.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

psuSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.4.1.5
Secondary State of the PSU.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

psuOutputVoltage 1.3.6.1.4.1.2544.1.12.3.1.4.1.6
Output Voltage of the PSU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psuTemperature 1.3.6.1.4.1.2544.1.12.3.1.4.1.7
Temperature of the PSU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psuOutputCurrent 1.3.6.1.4.1.2544.1.12.3.1.4.1.8
Output Current of the PSU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psuStorageType 1.3.6.1.4.1.2544.1.12.3.1.4.1.9
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

psuRowStatus 1.3.6.1.4.1.2544.1.12.3.1.4.1.10
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of psuRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with psuRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The psuRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

fanTable 1.3.6.1.4.1.2544.1.12.3.1.5
Contains information on FANs within the Shelf.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FanEntry

fanEntry 1.3.6.1.4.1.2544.1.12.3.1.5.1
A conceptual row in the fanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  FanEntry  

fanEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.5.1.1
Entity Index from ENTITY-MIB for this FAN.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

fanAdminState 1.3.6.1.4.1.2544.1.12.3.1.5.1.2
Administrative State of the FAN.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

fanOperationalState 1.3.6.1.4.1.2544.1.12.3.1.5.1.3
Operational State of the FAN.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

fanSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.5.1.4
Secondary State of the FAN.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

fanStorageType 1.3.6.1.4.1.2544.1.12.3.1.5.1.5
Storage Type of the FAN.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

fanRowStatus 1.3.6.1.4.1.2544.1.12.3.1.5.1.6
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of fanRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with fanRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The fanRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

scuTable 1.3.6.1.4.1.2544.1.12.3.1.6
Contains information on SCU within the Shelf.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScuEntry

scuEntry 1.3.6.1.4.1.2544.1.12.3.1.6.1
A conceptual row in the scuTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ScuEntry  

scuEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.6.1.1
Entity Index from ENTITY-MIB for the SCU card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

scuAdminState 1.3.6.1.4.1.2544.1.12.3.1.6.1.2
Administrative State of the SCU.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

scuOperationalState 1.3.6.1.4.1.2544.1.12.3.1.6.1.3
Operational State of the SCU.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

scuSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.6.1.4
Secondary State of the SCU.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

scuVoltage 1.3.6.1.4.1.2544.1.12.3.1.6.1.5
Voltage of the SCU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

scuTemperature 1.3.6.1.4.1.2544.1.12.3.1.6.1.6
Temperature of the SCU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

scuRestartAction 1.3.6.1.4.1.2544.1.12.3.1.6.1.7
Allows to perform specified action on the SCU card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

scuStorageType 1.3.6.1.4.1.2544.1.12.3.1.6.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

scuRowStatus 1.3.6.1.4.1.2544.1.12.3.1.6.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of scuRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with scuRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The scuRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

scuFlashModelNum 1.3.6.1.4.1.2544.1.12.3.1.6.1.10
This provides the Compact Flash Model Number on the SCU card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

scuFlashFirmwareRev 1.3.6.1.4.1.2544.1.12.3.1.6.1.11
This provides the Compact Flash Firmware Revision on the SCU card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

scuFlashSerialNum 1.3.6.1.4.1.2544.1.12.3.1.6.1.12
This provides the Compact Flash Serial Number on the SCU card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

nemiTable 1.3.6.1.4.1.2544.1.12.3.1.7
Contains information on NEMI within the Shelf.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NemiEntry

nemiEntry 1.3.6.1.4.1.2544.1.12.3.1.7.1
A conceptual row in the nemiTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NemiEntry  

nemiEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.7.1.1
Entity Index from ENTITY-MIB for the NEMI card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

nemiAdminState 1.3.6.1.4.1.2544.1.12.3.1.7.1.2
Administrative State of the NEMI.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

nemiOperationalState 1.3.6.1.4.1.2544.1.12.3.1.7.1.3
Operational State of the NEMI.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

nemiSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.7.1.4
Secondary State of the NEMI.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

nemiVoltage 1.3.6.1.4.1.2544.1.12.3.1.7.1.5
Voltage of the NEMI.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

nemiTemperature 1.3.6.1.4.1.2544.1.12.3.1.7.1.6
Temperature of the NEMI.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

nemiRestartAction 1.3.6.1.4.1.2544.1.12.3.1.7.1.7
Allows to perform specified action on the NEMI card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

nemiStorageType 1.3.6.1.4.1.2544.1.12.3.1.7.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

nemiRowStatus 1.3.6.1.4.1.2544.1.12.3.1.7.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of nemiRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with nemiRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The nemiRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

nemiForceOffLineAction 1.3.6.1.4.1.2544.1.12.3.1.7.1.10
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

nemiFlashModelNum 1.3.6.1.4.1.2544.1.12.3.1.7.1.11
This provides the Flash Model Number on the NEMI card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

nemiFlashFirmwareRev 1.3.6.1.4.1.2544.1.12.3.1.7.1.12
This provides the Flash Firmware Revision on the NEMI card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

nemiFlashSerialNum 1.3.6.1.4.1.2544.1.12.3.1.7.1.13
This provides the Flash Serial Number on the NEMI card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ethernetNTUCardTable 1.3.6.1.4.1.2544.1.12.3.1.8
Contains information on Ethernet NTU Cards within the Shelf. These cards support 10M, 100M and 1G Ethernet Interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTUCardEntry

ethernetNTUCardEntry 1.3.6.1.4.1.2544.1.12.3.1.8.1
A conceptual row in the ethernetNTUCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTUCardEntry  

ethernetNTUCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.8.1.1
Entity Index from ENTITY-MIB for the Ethernet NTU Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTUCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.8.1.2
Administrative State of the Ethernet NTU Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTUCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.8.1.3
Operational State of the Ethernet NTU Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTUCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.8.1.4
Secondary State of the Ethernet NTU Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTUCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.8.1.5
Voltage of the Ethernet NTU Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTUCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.8.1.6
Temperature of the Ethernet NTU Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTUCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.8.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTU Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTUCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.8.1.8
Allows to perform specified action on the Ethernet NTU card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTUCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.8.1.9
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernetNTUCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.8.1.10
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetNTUCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTUCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetNTUCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernetCPMRCardTable 1.3.6.1.4.1.2544.1.12.3.1.9
Contains information on Ethernet CPMR Cards within the Shelf.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetCPMRCardEntry

ethernetCPMRCardEntry 1.3.6.1.4.1.2544.1.12.3.1.9.1
A conceptual row in the ethernetCPMRCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetCPMRCardEntry  

ethernetCPMRCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.9.1.1
Entity Index from ENTITY-MIB for the Ethernet CPMR Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetCPMRCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.9.1.2
Administrative State of the Ethernet CPMR Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetCPMRCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.9.1.3
Operational State of the Ethernet CPMR Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetCPMRCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.9.1.4
Secondary State of the Ethernet CPMR Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetCPMRCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.9.1.5
Voltage of the Ethernet CPMR Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetCPMRCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.9.1.6
Temperature of the Ethernet CPMR Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetCPMRCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.9.1.7
Allows to perform specified action on the Ethernet CPMR card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetCPMRCardPSU1State 1.3.6.1.4.1.2544.1.12.3.1.9.1.8
Operational State of Power Supply Unit 1 on Ethernet CPMR chassis.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetCPMRCardPSU2State 1.3.6.1.4.1.2544.1.12.3.1.9.1.9
Operational State of Power Supply Unit 2 on Ethernet CPMR chassis.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetCPMRCardFAN1State 1.3.6.1.4.1.2544.1.12.3.1.9.1.10
Operational State of FAN 1 on Ethernet CPMR chassis.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetCPMRCardFAN2State 1.3.6.1.4.1.2544.1.12.3.1.9.1.11
Operational State of FAN 2 on Ethernet CPMR chassis.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetCPMRCardPsuType 1.3.6.1.4.1.2544.1.12.3.1.9.1.12
PSU Type on Ethernet CPMR chassis.
Status: current Access: read-only
OBJECT-TYPE    
  PsuType  

ethernetCPMRCardLLFMode 1.3.6.1.4.1.2544.1.12.3.1.9.1.13
Current Link Loss Forwarding Mode on CPMR.
Status: current Access: read-only
OBJECT-TYPE    
  CmCPMRLinkLossFwdMode  

ethernetCPMRCardLLFModeAction 1.3.6.1.4.1.2544.1.12.3.1.9.1.14
Operation to set the appropriate mode on CPMR.
Status: current Access: read-write
OBJECT-TYPE    
  CmCPMRLinkLossFwdMode  

ethernetNTEGE101CardTable 1.3.6.1.4.1.2544.1.12.3.1.10
Contains information on Ethernet NTE GE101 Cards. These are supported on the FSP150CC GE101 product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE101CardEntry

ethernetNTEGE101CardEntry 1.3.6.1.4.1.2544.1.12.3.1.10.1
A conceptual row in the ethernetNTEGE101CardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE101CardEntry  

ethernetNTEGE101CardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.10.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE101 Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE101CardAdminState 1.3.6.1.4.1.2544.1.12.3.1.10.1.2
Administrative State of the Ethernet NTE GE101 Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE101CardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.10.1.3
Operational State of the Ethernet NTE GE101 Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE101CardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.10.1.4
Secondary State of the Ethernet NTE GE101 Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE101CardVoltage 1.3.6.1.4.1.2544.1.12.3.1.10.1.5
Voltage of the Ethernet NTE GE101 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE101CardTemperature 1.3.6.1.4.1.2544.1.12.3.1.10.1.6
Temperature of the Ethernet NTE GE101 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE101CardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.10.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE101 Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE101CardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.10.1.8
Allows to perform specified action on the Ethernet NTE GE101 card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE206CardTable 1.3.6.1.4.1.2544.1.12.3.1.11
Contains information on Ethernet NTE GE206 Cards. These are supported on the FSP150CC GE206 product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE206CardEntry

ethernetNTEGE206CardEntry 1.3.6.1.4.1.2544.1.12.3.1.11.1
A conceptual row in the ethernetNTEGE206CardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE206CardEntry  

ethernetNTEGE206CardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.11.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE206 Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE206CardAdminState 1.3.6.1.4.1.2544.1.12.3.1.11.1.2
Administrative State of the Ethernet NTE GE206 Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE206CardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.11.1.3
Operational State of the Ethernet NTE GE206 Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE206CardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.11.1.4
Secondary State of the Ethernet NTE GE206 Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE206CardVoltage 1.3.6.1.4.1.2544.1.12.3.1.11.1.5
Voltage of the Ethernet NTE GE206 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE206CardTemperature 1.3.6.1.4.1.2544.1.12.3.1.11.1.6
Temperature of the Ethernet NTE GE206 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE206CardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.11.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE206 Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE206CardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.11.1.8
Allows to perform specified action on the Ethernet NTE GE206 card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE206CardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.11.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

pseudoWireE3CardTable 1.3.6.1.4.1.2544.1.12.3.1.12
Contains information on Pseudo Wire E3 (Emulation Edge to Edge) Cards. These are supported on the FSP150CC GE206 product.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PseudoWireE3CardEntry

pseudoWireE3CardEntry 1.3.6.1.4.1.2544.1.12.3.1.12.1
A conceptual row in the pseudoWireE3CardTable.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  PseudoWireE3CardEntry  

pseudoWireE3CardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.12.1.1
Entity Index from ENTITY-MIB for the Pseudo Wire E3 Card.
Status: obsolete Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

pseudoWireE3CardAdminState 1.3.6.1.4.1.2544.1.12.3.1.12.1.2
Administrative State of the Pseudo Wire E3 Card.
Status: obsolete Access: read-write
OBJECT-TYPE    
  AdminState  

pseudoWireE3CardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.12.1.3
Operational State of the Pseudo Wire E3 Card.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OperationalState  

pseudoWireE3CardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.12.1.4
Secondary State of the Pseudo Wire E3 Card.
Status: obsolete Access: read-only
OBJECT-TYPE    
  SecondaryState  

pseudoWireE3CardIpAddress 1.3.6.1.4.1.2544.1.12.3.1.12.1.5
External management IP Address of the Pseudo Wire E3 Card.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

pseudoWireE3CardIpNetmask 1.3.6.1.4.1.2544.1.12.3.1.12.1.6
External management IP Net mask of the Pseudo Wire E3 Card.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

pseudoWireE3CardIpGateway 1.3.6.1.4.1.2544.1.12.3.1.12.1.7
External management IP Gateway of the Pseudo Wire E3 Card.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

pseudoWireE3CardDhcpEnabled 1.3.6.1.4.1.2544.1.12.3.1.12.1.8
External management - whether DHCP is enabled.
Status: obsolete Access: read-write
OBJECT-TYPE    
  TruthValue  

pseudoWireE3CardMgmtVlanId 1.3.6.1.4.1.2544.1.12.3.1.12.1.9
External management VLAN Id for the Pseudo Wire E3 Card.
Status: obsolete Access: read-write
OBJECT-TYPE    
  VlanId  

pseudoWireE3CardTimeOfDay 1.3.6.1.4.1.2544.1.12.3.1.12.1.10
Time of day for the Pseudo Wire E3 Card.
Status: obsolete Access: read-write
OBJECT-TYPE    
  DateAndTime  

pseudoWireE3CardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.12.1.11
Allows to perform restart action on the Pseudo Wire E3 card.
Status: obsolete Access: read-write
OBJECT-TYPE    
  RestartType  

scuTTable 1.3.6.1.4.1.2544.1.12.3.1.13
Contains information on SCU-T within the Shelf.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScuTEntry

scuTEntry 1.3.6.1.4.1.2544.1.12.3.1.13.1
A conceptual row in the scuTTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ScuTEntry  

scuTEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.13.1.1
Entity Index from ENTITY-MIB for the SCU-T card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

scuTAdminState 1.3.6.1.4.1.2544.1.12.3.1.13.1.2
Administrative State of the SCU-T.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

scuTOperationalState 1.3.6.1.4.1.2544.1.12.3.1.13.1.3
Operational State of the SCU-T.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

scuTSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.13.1.4
Secondary State of the SCU-T.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

scuTVoltage 1.3.6.1.4.1.2544.1.12.3.1.13.1.5
Voltage of the SCU-T.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

scuTTemperature 1.3.6.1.4.1.2544.1.12.3.1.13.1.6
Temperature of the SCU-T.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

scuTRestartAction 1.3.6.1.4.1.2544.1.12.3.1.13.1.7
Allows to perform specified action on the SCU-T card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

scuTStorageType 1.3.6.1.4.1.2544.1.12.3.1.13.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

scuTRowStatus 1.3.6.1.4.1.2544.1.12.3.1.13.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of scuTRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The scuTRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernetNTECardTable 1.3.6.1.4.1.2544.1.12.3.1.14
Contains information on Ethernet NTE Cards within the Shelf. These cards support 10M, 100M and 1G Ethernet Interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTECardEntry

ethernetNTECardEntry 1.3.6.1.4.1.2544.1.12.3.1.14.1
A conceptual row in the ethernetNTECardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTECardEntry  

ethernetNTECardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.14.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTECardAdminState 1.3.6.1.4.1.2544.1.12.3.1.14.1.2
Administrative State of the Ethernet NTE Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTECardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.14.1.3
Operational State of the Ethernet NTE Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTECardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.14.1.4
Secondary State of the Ethernet NTE Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTECardVoltage 1.3.6.1.4.1.2544.1.12.3.1.14.1.5
Voltage of the Ethernet NTE Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTECardTemperature 1.3.6.1.4.1.2544.1.12.3.1.14.1.6
Temperature of the Ethernet NTE Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTECardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.14.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTECardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.14.1.8
Allows to perform specified action on the Ethernet NTE card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTECardStorageType 1.3.6.1.4.1.2544.1.12.3.1.14.1.9
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernetNTECardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.14.1.10
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetNTECardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTECardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetNTECardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernetNTEGE201CardTable 1.3.6.1.4.1.2544.1.12.3.1.15
Contains information on Ethernet NTE GE201 Cards. These are supported on the FSP150CC GE201 product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE201CardEntry

ethernetNTEGE201CardEntry 1.3.6.1.4.1.2544.1.12.3.1.15.1
A conceptual row in the ethernetNTEGE201CardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE201CardEntry  

ethernetNTEGE201CardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.15.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE201 Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE201CardAdminState 1.3.6.1.4.1.2544.1.12.3.1.15.1.2
Administrative State of the Ethernet NTE GE201 Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE201CardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.15.1.3
Operational State of the Ethernet NTE GE201 Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE201CardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.15.1.4
Secondary State of the Ethernet NTE GE201 Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE201CardVoltage 1.3.6.1.4.1.2544.1.12.3.1.15.1.5
Voltage of the Ethernet NTE GE201 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE201CardTemperature 1.3.6.1.4.1.2544.1.12.3.1.15.1.6
Temperature of the Ethernet NTE GE201 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE201CardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.15.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE201 Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE201CardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.15.1.8
Allows to perform specified action on the Ethernet NTE GE201 card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE201CardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.15.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE201SyncECardTable 1.3.6.1.4.1.2544.1.12.3.1.16
Contains information on Ethernet NTE GE201SyncE Cards. These are supported on the FSP150CC GE201SyncE product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE201SyncECardEntry

ethernetNTEGE201SyncECardEntry 1.3.6.1.4.1.2544.1.12.3.1.16.1
A conceptual row in the ethernetNTEGE201SyncECardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE201SyncECardEntry  

ethernetNTEGE201SyncECardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.16.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE201SyncE Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE201SyncECardAdminState 1.3.6.1.4.1.2544.1.12.3.1.16.1.2
Administrative State of the Ethernet NTE GE201SyncE Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE201SyncECardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.16.1.3
Operational State of the Ethernet NTE GE201SyncE Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE201SyncECardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.16.1.4
Secondary State of the Ethernet NTE GE201SyncE Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE201SyncECardVoltage 1.3.6.1.4.1.2544.1.12.3.1.16.1.5
Voltage of the Ethernet NTE GE201SyncE Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE201SyncECardTemperature 1.3.6.1.4.1.2544.1.12.3.1.16.1.6
Temperature of the Ethernet NTE GE201SyncE Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE201SyncECardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.16.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE201SyncE Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE201SyncECardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.16.1.8
Allows to perform specified action on the Ethernet NTE GE201SyncE card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE201SyncECardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.16.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE206FCardTable 1.3.6.1.4.1.2544.1.12.3.1.17
Contains information on Ethernet NTE GE206F Cards. These are supported on the FSP150CC GE206 product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE206FCardEntry

ethernetNTEGE206FCardEntry 1.3.6.1.4.1.2544.1.12.3.1.17.1
A conceptual row in the ethernetNTEGE206FCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE206FCardEntry  

ethernetNTEGE206FCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.17.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE206 Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE206FCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.17.1.2
Administrative State of the Ethernet NTE GE206 Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE206FCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.17.1.3
Operational State of the Ethernet NTE GE206 Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE206FCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.17.1.4
Secondary State of the Ethernet NTE GE206 Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE206FCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.17.1.5
Voltage of the Ethernet NTE GE206 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE206FCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.17.1.6
Temperature of the Ethernet NTE GE206 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE206FCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.17.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE206 Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE206FCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.17.1.8
Allows to perform specified action on the Ethernet NTE GE206 card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE206FCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.17.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernet1x10GCardTable 1.3.6.1.4.1.2544.1.12.3.1.18
Contains information on Ethernet 1x10G Cards.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ethernet1x10GCardEntry

ethernet1x10GCardEntry 1.3.6.1.4.1.2544.1.12.3.1.18.1
A conceptual row in the ethernet1x10GCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ethernet1x10GCardEntry  

ethernet1x10GCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.18.1.1
Entity Index from ENTITY-MIB for the Ethernet 1x10G Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernet1x10GCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.18.1.2
Administrative State of the Ethernet 1x10G Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernet1x10GCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.18.1.3
Operational State of the Ethernet 1x10G Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernet1x10GCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.18.1.4
Secondary State of the Ethernet 1x10G Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernet1x10GCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.18.1.5
Temperature of the Ethernet 1x10G Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernet1x10GCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.18.1.6
Whether or not SNMP dying gasp is enabled on the Ethernet 1x10G Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernet1x10GCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.18.1.7
Allows to perform specified action on the Ethernet 1x10G card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernet1x10GCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.18.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernet1x10GCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.18.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernet1x10GCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTUCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernet1x10GCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernet1x10GCardForceOffLineAction 1.3.6.1.4.1.2544.1.12.3.1.18.1.10
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernet10x1GCardTable 1.3.6.1.4.1.2544.1.12.3.1.19
Contains information on Ethernet 10x1G Cards.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ethernet10x1GCardEntry

ethernet10x1GCardEntry 1.3.6.1.4.1.2544.1.12.3.1.19.1
A conceptual row in the ethernet10x1GCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ethernet10x1GCardEntry  

ethernet10x1GCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.19.1.1
Entity Index from ENTITY-MIB for the Ethernet 10x1G Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernet10x1GCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.19.1.2
Administrative State of the Ethernet 10x1G Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernet10x1GCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.19.1.3
Operational State of the Ethernet 10x1G Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernet10x1GCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.19.1.4
Secondary State of the Ethernet 10x1G Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernet10x1GCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.19.1.5
Temperature of the Ethernet 10x1G Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernet10x1GCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.19.1.6
Whether or not SNMP dying gasp is enabled on the Ethernet 10x1G Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernet10x1GCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.19.1.7
Allows to perform specified action on the Ethernet 10x1G card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernet10x1GCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.19.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernet10x1GCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.19.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernet10x1GCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernet10x1GCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernet10x1GCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernet10x1GCardForceOffLineAction 1.3.6.1.4.1.2544.1.12.3.1.19.1.10
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetSWFCardTable 1.3.6.1.4.1.2544.1.12.3.1.20
Contains information on Ethernet SWF Cards.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetSWFCardEntry

ethernetSWFCardEntry 1.3.6.1.4.1.2544.1.12.3.1.20.1
A conceptual row in the ethernetSWFCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetSWFCardEntry  

ethernetSWFCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.20.1.1
Entity Index from ENTITY-MIB for the Ethernet SWF Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetSWFCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.20.1.2
Administrative State of the Ethernet SWF Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetSWFCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.20.1.3
Operational State of the Ethernet SWF Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetSWFCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.20.1.4
Secondary State of the Ethernet SWF Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetSWFCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.20.1.5
Temperature of the Ethernet SWF Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetSWFCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.20.1.6
Allows to perform specified action on the Ethernet SWF card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetSWFCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.20.1.7
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernetSWFCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.20.1.8
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetSWFCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTUCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetSWFCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernetSWFCardForceOffLineAction 1.3.6.1.4.1.2544.1.12.3.1.20.1.9
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

stuCardTable 1.3.6.1.4.1.2544.1.12.3.1.21
Contains information on STU Cards.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StuCardEntry

stuCardEntry 1.3.6.1.4.1.2544.1.12.3.1.21.1
A conceptual row in the stuCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  StuCardEntry  

stuCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.21.1.1
Entity Index from ENTITY-MIB for the STU Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

stuCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.21.1.2
Administrative State of the Stu Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

stuCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.21.1.3
Operational State of the Stu Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

stuCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.21.1.4
Secondary State of the Stu Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

stuCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.21.1.5
Temperature of the Stu Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.21.1.6
Allows to perform specified action on the Stu card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

stuCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.21.1.7
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

stuCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.21.1.8
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stuCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stuRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stuCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

stuCardForceOffLineAction 1.3.6.1.4.1.2544.1.12.3.1.21.1.9
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

amiTable 1.3.6.1.4.1.2544.1.12.3.1.22
Contains information on AMI within the Shelf.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AmiEntry

amiEntry 1.3.6.1.4.1.2544.1.12.3.1.22.1
A conceptual row in the amiTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  AmiEntry  

amiEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.22.1.1
Entity Index from ENTITY-MIB for the AMI card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

amiAdminState 1.3.6.1.4.1.2544.1.12.3.1.22.1.2
Administrative State of the AMI.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

amiOperationalState 1.3.6.1.4.1.2544.1.12.3.1.22.1.3
Operational State of the AMI.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

amiSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.22.1.4
Secondary State of the AMI.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

amiTemperature 1.3.6.1.4.1.2544.1.12.3.1.22.1.5
Temperature of the AMI.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

amiRestartAction 1.3.6.1.4.1.2544.1.12.3.1.22.1.6
Allows to perform specified action on the AMI card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

stiTable 1.3.6.1.4.1.2544.1.12.3.1.23
Contains information on STI within the Shelf.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StiEntry

stiEntry 1.3.6.1.4.1.2544.1.12.3.1.23.1
A conceptual row in the stiTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  StiEntry  

stiEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.23.1.1
Entity Index from ENTITY-MIB for the STI card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

stiAdminState 1.3.6.1.4.1.2544.1.12.3.1.23.1.2
Administrative State of the STI.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

stiOperationalState 1.3.6.1.4.1.2544.1.12.3.1.23.1.3
Operational State of the STI.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

stiSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.23.1.4
Secondary State of the STI.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

stiTemperature 1.3.6.1.4.1.2544.1.12.3.1.23.1.5
Temperature of the STI.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stiStorageType 1.3.6.1.4.1.2544.1.12.3.1.23.1.6
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

stiRowStatus 1.3.6.1.4.1.2544.1.12.3.1.23.1.7
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stiRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stiRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stiRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

f3UsbHostTable 1.3.6.1.4.1.2544.1.12.3.1.24
Contains information on Usb Host.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3UsbHostEntry

f3UsbHostEntry 1.3.6.1.4.1.2544.1.12.3.1.24.1
A conceptual row in the f3UsbHostTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3UsbHostEntry  

f3UsbHostIndex 1.3.6.1.4.1.2544.1.12.3.1.24.1.1
The actual physical usb host index that uniquely identify a usb host.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

f3UsbHostEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.24.1.2
Entity Index from ENTITY-MIB for the usb host.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

f3UsbHostUnitName 1.3.6.1.4.1.2544.1.12.3.1.24.1.3
This is the inserted usb device's unit name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

f3UsbHostFormatVersion 1.3.6.1.4.1.2544.1.12.3.1.24.1.4
This is the inserted usb device's format version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

f3UsbHostCLEICode 1.3.6.1.4.1.2544.1.12.3.1.24.1.5
This is the inserted usb device's CLEI code.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

f3UsbHostPartNumber 1.3.6.1.4.1.2544.1.12.3.1.24.1.6
This is the inserted usb device's Part Number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

f3UsbHostHwRev 1.3.6.1.4.1.2544.1.12.3.1.24.1.7
This is the inserted usb device's Hardware Revision.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

f3UsbHostSwRev 1.3.6.1.4.1.2544.1.12.3.1.24.1.8
This is the inserted usb device's Software Revision.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

f3UsbHostSerialNum 1.3.6.1.4.1.2544.1.12.3.1.24.1.9
This is the inserted usb device's Serial Number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

f3UsbHostMfgName 1.3.6.1.4.1.2544.1.12.3.1.24.1.10
This is the inserted usb device's Manufacturer Name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

f3UsbHostMfgDate 1.3.6.1.4.1.2544.1.12.3.1.24.1.11
This is the inserted usb device's Manufacturer date.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3UsbHostMfgSite 1.3.6.1.4.1.2544.1.12.3.1.24.1.12
This is the inserted usb device's Manufacturer site.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

f3UsbHostSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.24.1.13
Secondary State of the usb device.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

f3UsbHostPhysicalAddress 1.3.6.1.4.1.2544.1.12.3.1.24.1.14
This is the inserted usb device's MAC Address, if applicable.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ethernetNTEGE112CardTable 1.3.6.1.4.1.2544.1.12.3.1.25
Contains information on Ethernet NTE GE112 Cards. These are supported on the FSP150CC GE112 product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE112CardEntry

ethernetNTEGE112CardEntry 1.3.6.1.4.1.2544.1.12.3.1.25.1
A conceptual row in the ethernetNTEGE112CardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE112CardEntry  

ethernetNTEGE112CardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.25.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE112CardAdminState 1.3.6.1.4.1.2544.1.12.3.1.25.1.2
Administrative State of the Ethernet NTE GE112 Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE112CardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.25.1.3
Operational State of the Ethernet NTE GE112 Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE112CardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.25.1.4
Secondary State of the Ethernet NTE GE112 Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE112CardVoltage 1.3.6.1.4.1.2544.1.12.3.1.25.1.5
Voltage of the Ethernet NTE GE112 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE112CardTemperature 1.3.6.1.4.1.2544.1.12.3.1.25.1.6
Temperature of the Ethernet NTE GE112 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE112CardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.25.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112 Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE112CardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.25.1.8
Allows to perform specified action on the Ethernet NTE GE112 card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE112CardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.25.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE112CardSwitchPortActionPort 1.3.6.1.4.1.2544.1.12.3.1.25.1.10
Which port to perform specified switch action on the Ethernet NTE GE112 card.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

ethernetNTEGE112CardSwitchPortAction 1.3.6.1.4.1.2544.1.12.3.1.25.1.11
Allows to perform specified action on the Ethernet NTE GE112 card.
Status: current Access: read-write
OBJECT-TYPE    
  SwitchPortAction  

ethernetNTEGE114CardTable 1.3.6.1.4.1.2544.1.12.3.1.26
Contains information on Ethernet NTE GE114 Cards. These are supported on the FSP150CC GE114 product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE114CardEntry

ethernetNTEGE114CardEntry 1.3.6.1.4.1.2544.1.12.3.1.26.1
A conceptual row in the ethernetNTEGE114CardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE114CardEntry  

ethernetNTEGE114CardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.26.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE114 Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE114CardAdminState 1.3.6.1.4.1.2544.1.12.3.1.26.1.2
Administrative State of the Ethernet NTE GE114 Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE114CardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.26.1.3
Operational State of the Ethernet NTE GE114 Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE114CardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.26.1.4
Secondary State of the Ethernet NTE GE114 Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE114CardVoltage 1.3.6.1.4.1.2544.1.12.3.1.26.1.5
Voltage of the Ethernet NTE GE112 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114CardTemperature 1.3.6.1.4.1.2544.1.12.3.1.26.1.6
Temperature of the Ethernet NTE GE114 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114CardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.26.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114 Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE114CardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.26.1.8
Allows to perform specified action on the Ethernet NTE GE114 card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE114CardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.26.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE114CardSwitchPortActionPort 1.3.6.1.4.1.2544.1.12.3.1.26.1.10
Which port to perform specified switch action on the Ethernet NTE GE114 card.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

ethernetNTEGE114CardSwitchPortAction 1.3.6.1.4.1.2544.1.12.3.1.26.1.11
Allows to perform specified action on the Ethernet NTE GE114 card.
Status: current Access: read-write
OBJECT-TYPE    
  SwitchPortAction  

ethernetNTEGE206VCardTable 1.3.6.1.4.1.2544.1.12.3.1.27
Contains information on Ethernet NTE GE206V Cards. These are supported on the FSP150CC GE206V product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE206VCardEntry

ethernetNTEGE206VCardEntry 1.3.6.1.4.1.2544.1.12.3.1.27.1
A conceptual row in the ethernetNTEGE206VCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE206VCardEntry  

ethernetNTEGE206VCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.27.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE206V Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE206VCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.27.1.2
Administrative State of the Ethernet NTE GE206V Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE206VCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.27.1.3
Operational State of the Ethernet NTE GE206V Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE206VCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.27.1.4
Secondary State of the Ethernet NTE GE206V Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE206VCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.27.1.5
Voltage of the Ethernet NTE GE206V Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE206VCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.27.1.6
Temperature of the Ethernet NTE GE206V Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE206VCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.27.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE206V Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE206VCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.27.1.8
Allows to perform specified action on the Ethernet NTE GE206V card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE206VCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.27.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetGE4SCCCardTable 1.3.6.1.4.1.2544.1.12.3.1.28
Contains information on Ethernet GE206V Optical Port Expander Cards. These are supported on the FSP150CC GE206V product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetGE4SCCCardEntry

ethernetGE4SCCCardEntry 1.3.6.1.4.1.2544.1.12.3.1.28.1
A conceptual row in the ethernetGE4SCCCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetGE4SCCCardEntry  

ethernetGE4SCCCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.28.1.1
Entity Index from ENTITY-MIB for the Ethernet GE-4S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetGE4SCCCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.28.1.2
Administrative State of the Ethernet GE-4S Connector Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetGE4SCCCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.28.1.3
Operational State of the Ethernet GE-4S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetGE4SCCCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.28.1.4
Secondary State of the Ethernet GE-4S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetGE4SCCCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.28.1.5
Voltage of the Ethernet GE-4S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetGE4SCCCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.28.1.6
Temperature of the Ethernet GE-4S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetGE4SCCCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.28.1.7
Allows to perform specified action on the Ethernet GE-4S Connector card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetGE4SCCCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.28.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernetGE4SCCCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.28.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetGE4SCCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetGE4SCCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetGE4SCCCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernetGE4ECCCardTable 1.3.6.1.4.1.2544.1.12.3.1.29
Contains information on Ethernet GE206V Optical Port Expander Cards. These are supported on the FSP150CC GE206V product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetGE4ECCCardEntry

ethernetGE4ECCCardEntry 1.3.6.1.4.1.2544.1.12.3.1.29.1
A conceptual row in the ethernetGE4ECCCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetGE4ECCCardEntry  

ethernetGE4ECCCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.29.1.1
Entity Index from ENTITY-MIB for the Ethernet GE-4S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetGE4ECCCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.29.1.2
Administrative State of the Ethernet GE-4S Connector Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetGE4ECCCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.29.1.3
Operational State of the Ethernet GE-4S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetGE4ECCCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.29.1.4
Secondary State of the Ethernet GE-4S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetGE4ECCCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.29.1.5
Voltage of the Ethernet GE-4S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetGE4ECCCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.29.1.6
Temperature of the Ethernet GE-4S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetGE4ECCCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.29.1.7
Allows to perform specified action on the Ethernet GE-4S Connector card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetGE4ECCCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.29.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernetGE4ECCCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.29.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetGE4ECCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetGE4ECCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetGE4ECCCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernetNTEXG210CardTable 1.3.6.1.4.1.2544.1.12.3.1.30
Contains information on Ethernet NTE XG210 Cards. These are supported on the FSP150CC XG210 product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEXG210CardEntry

ethernetNTEXG210CardEntry 1.3.6.1.4.1.2544.1.12.3.1.30.1
A conceptual row in the ethernetNTEXG210CardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEXG210CardEntry  

ethernetNTEXG210CardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.30.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE XG210 Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEXG210CardAdminState 1.3.6.1.4.1.2544.1.12.3.1.30.1.2
Administrative State of the Ethernet NTE XG210 Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEXG210CardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.30.1.3
Operational State of the Ethernet NTE XG210 Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEXG210CardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.30.1.4
Secondary State of the Ethernet NTE XG210 Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEXG210CardVoltage 1.3.6.1.4.1.2544.1.12.3.1.30.1.5
Voltage of the Ethernet NTE XG210 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEXG210CardTemperature 1.3.6.1.4.1.2544.1.12.3.1.30.1.6
Temperature of the Ethernet NTE XG210 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEXG210CardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.30.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG210 Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEXG210CardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.30.1.8
Allows to perform specified action on the Ethernet NTE XG210 card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEXG210CardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.30.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetXG1XCCCardTable 1.3.6.1.4.1.2544.1.12.3.1.31
Contains information on Ethernet XG210/SH1PCS XFP Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS products.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetXG1XCCCardEntry

ethernetXG1XCCCardEntry 1.3.6.1.4.1.2544.1.12.3.1.31.1
A conceptual row in the ethernetXG1XCCCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetXG1XCCCardEntry  

ethernetXG1XCCCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.31.1.1
Entity Index from ENTITY-MIB for the Ethernet XG-1-XFP Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetXG1XCCCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.31.1.2
Administrative State of the Ethernet XG-1-XFP Connector Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetXG1XCCCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.31.1.3
Operational State of the Ethernet XG-1-XFP Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetXG1XCCCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.31.1.4
Secondary State of the Ethernet XG-1-XFP Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetXG1XCCCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.31.1.5
Voltage of the Ethernet XG-1-XFP Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetXG1XCCCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.31.1.6
Temperature of the Ethernet XG-1-XFP Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetXG1XCCCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.31.1.7
Allows to perform specified action on the Ethernet XG-1-XFP Connector card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetXG1XCCCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.31.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernetXG1XCCCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.31.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetXG1XCCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetXG1XCCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetXG1XCCCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernetXG1SCCCardTable 1.3.6.1.4.1.2544.1.12.3.1.32
Contains information on Ethernet XG210/SH1PCS SFP+ Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS products.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetXG1SCCCardEntry

ethernetXG1SCCCardEntry 1.3.6.1.4.1.2544.1.12.3.1.32.1
A conceptual row in the ethernetXG1SCCCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetXG1SCCCardEntry  

ethernetXG1SCCCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.32.1.1
Entity Index from ENTITY-MIB for the Ethernet XG-1-SFP+ Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetXG1SCCCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.32.1.2
Administrative State of the Ethernet XG-1-SFP+ Connector Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetXG1SCCCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.32.1.3
Operational State of the Ethernet XG-1-SFP+ Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetXG1SCCCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.32.1.4
Secondary State of the Ethernet XG-1-SFP+ Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetXG1SCCCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.32.1.5
Voltage of the Ethernet XG-1-SFP+ Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetXG1SCCCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.32.1.6
Temperature of the Ethernet XG-1-SFP+ Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetXG1SCCCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.32.1.7
Allows to perform specified action on the Ethernet XG-1-SFP+ Connector card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetXG1SCCCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.32.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernetXG1SCCCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.32.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetXG1SCCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetXG1SCCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetXG1SCCCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernetOverOCSTMCardTable 1.3.6.1.4.1.2544.1.12.3.1.33
Contains information on STM1-4-ET Cards.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetOverOCSTMCardEntry

ethernetOverOCSTMCardEntry 1.3.6.1.4.1.2544.1.12.3.1.33.1
A conceptual row in the ethernetOverOCSTMCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetOverOCSTMCardEntry  

ethernetOverOCSTMCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.33.1.1
Entity Index from ENTITY-MIB for the STM1-4-ET Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetOverOCSTMCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.33.1.2
Administrative State of the STM1-4-ET Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetOverOCSTMCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.33.1.3
Operational State of the STM1-4-ET Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetOverOCSTMCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.33.1.4
Secondary State of the STM1-4-ET Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetOverOCSTMCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.33.1.5
Temperature of the STM1-4-ET Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetOverOCSTMCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.33.1.6
Whether or not SNMP dying gasp is enabled on the STM1-4-ET Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetOverOCSTMCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.33.1.7
Allows to perform specified action on the STM1-4-ET card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetOverOCSTMCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.33.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernetOverOCSTMCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.33.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetOverOCSTMCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernet10x1GCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetOverOCSTMCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernetOverOCSTMCardForceOffLineAction 1.3.6.1.4.1.2544.1.12.3.1.33.1.10
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetOverOCSTMCardMode 1.3.6.1.4.1.2544.1.12.3.1.33.1.11
This attribute is to show/set the SONET/SDH mode and OC3/OC12/STM1/STM4 speed for SONET/SDH..
Status: current Access: read-write
OBJECT-TYPE    
  PortCarrierType  

pseudoWireOcnStmCardTable 1.3.6.1.4.1.2544.1.12.3.1.34
Contains information on Pseudo Wire OCN STM Cards. These are supported on the FSP150CC GE206v product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PseudoWireOcnStmCardEntry

pseudoWireOcnStmCardEntry 1.3.6.1.4.1.2544.1.12.3.1.34.1
A conceptual row in the pseudoWireOcnStmCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PseudoWireOcnStmCardEntry  

pseudoWireOcnStmCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.34.1.1
Entity Index from ENTITY-MIB for the Pseudo Wire OCN/STM Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

pseudoWireOcnStmCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.34.1.2
Administrative State of the Pseudo Wire OCN/STM Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

pseudoWireOcnStmCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.34.1.3
Operational State of the Pseudo Wire OCN/STM Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

pseudoWireOcnStmCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.34.1.4
Secondary State of the Pseudo Wire OCN/STM Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

pseudoWireOcnStmCardIpAddress 1.3.6.1.4.1.2544.1.12.3.1.34.1.5
IP Address associated with the Pseudo Wire OCN/STM Card.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pseudoWireOcnStmCardMode 1.3.6.1.4.1.2544.1.12.3.1.34.1.6
Card Mode of with the Pseudo Wire OCN/STM Card.
Status: current Access: read-write
OBJECT-TYPE    
  PWE3OCNSTMCardMode  

pseudoWireOcnStmCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.34.1.7
Voltage of the Pseudo Wire OCN/STM Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pseudoWireOcnStmCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.34.1.8
Temperature of the Pseudo Wire OCN/STM Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pseudoWireOcnStmCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.34.1.9
Allows to perform specified action on the Pseudo Wire OCN/STM card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

pseudoWireOcnStmCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.34.1.10
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

pseudoWireOcnStmCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.34.1.11
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of pseudoWireOcnStmCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with pseudoWireOcnStmCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The pseudoWireOcnStmCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pseudoWireOcnStmCardPSNEncapsulation 1.3.6.1.4.1.2544.1.12.3.1.34.1.12
This object specifies Packet Switched Network demultiplexing layer header type of the pseudo-wire packets.
Status: current Access: read-write
OBJECT-TYPE    
  PSNEncapsulationMode  

pseudoWireOcnStmCardFreqSourceType 1.3.6.1.4.1.2544.1.12.3.1.34.1.13
This object represents the TDM Frequency source type of OC/STM card.
Status: current Access: read-write
OBJECT-TYPE    
  TDMFrequencySourceType  

pseudoWireOcnStmCardFreqSource 1.3.6.1.4.1.2544.1.12.3.1.34.1.14
This object represents the TDM Frequency source of OC/STM card.
Status: current Access: read-write
OBJECT-TYPE    
  VariablePointer  

pseudoWireOcnStmCardForceOffLineAction 1.3.6.1.4.1.2544.1.12.3.1.34.1.15
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

pseudoWireE1T1CardTable 1.3.6.1.4.1.2544.1.12.3.1.35
Contains information on Pseudo Wire T1/E1 Cards. These are supported on the FSP150CC GE206v product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PseudoWireE1T1CardEntry

pseudoWireE1T1CardEntry 1.3.6.1.4.1.2544.1.12.3.1.35.1
A conceptual row in the pseudoWireE1T1CardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PseudoWireE1T1CardEntry  

pseudoWireE1T1CardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.35.1.1
Entity Index from ENTITY-MIB for the Pseudo Wire T1/E1 Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

pseudoWireE1T1CardAdminState 1.3.6.1.4.1.2544.1.12.3.1.35.1.2
Administrative State of the Pseudo Wire T1/E1 Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

pseudoWireE1T1CardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.35.1.3
Operational State of the Pseudo Wire T1/E1 Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

pseudoWireE1T1CardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.35.1.4
Secondary State of the Pseudo Wire T1/E1 Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

pseudoWireE1T1CardIpAddress 1.3.6.1.4.1.2544.1.12.3.1.35.1.5
IP Address associated with the Pseudo Wire T1/E1 Card.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pseudoWireE1T1CardMode 1.3.6.1.4.1.2544.1.12.3.1.35.1.6
Card Mode of with the Pseudo Wire T1/E1 Card.
Status: current Access: read-write
OBJECT-TYPE    
  PWE3E1T1CardMode  

pseudoWireE1T1CardVoltage 1.3.6.1.4.1.2544.1.12.3.1.35.1.7
Voltage of the Pseudo Wire T1/E1 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pseudoWireE1T1CardTemperature 1.3.6.1.4.1.2544.1.12.3.1.35.1.8
Temperature of the Pseudo Wire T1/E1 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pseudoWireE1T1CardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.35.1.9
Allows to perform specified action on the Pseudo Wire T1/E1 card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

pseudoWireE1T1CardStorageType 1.3.6.1.4.1.2544.1.12.3.1.35.1.10
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

pseudoWireE1T1CardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.35.1.11
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of pseudoWireE1T1CardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with pseudoWireE1T1CardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The pseudoWireE1T1CardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pseudoWireE1T1CardPSNEncapsulation 1.3.6.1.4.1.2544.1.12.3.1.35.1.12
This object specifies Packet Switched Network demultiplexing layer header type of the pseudo-wire packets.
Status: current Access: read-write
OBJECT-TYPE    
  PSNEncapsulationMode  

ethernet1x10GHighPerCardTable 1.3.6.1.4.1.2544.1.12.3.1.36
Contains information on Ethernet 1x10G High Performance Cards.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ethernet1x10GHighPerCardEntry

ethernet1x10GHighPerCardEntry 1.3.6.1.4.1.2544.1.12.3.1.36.1
A conceptual row in the ethernet1x10GHighPerCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ethernet1x10GHighPerCardEntry  

ethernet1x10GHighPerCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.36.1.1
Entity Index from ENTITY-MIB for the Ethernet 1x10G High Performance Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernet1x10GHighPerCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.36.1.2
Administrative State of the Ethernet 1x10G High Performance Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernet1x10GHighPerCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.36.1.3
Operational State of the Ethernet 1x10G High Performance Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernet1x10GHighPerCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.36.1.4
Secondary State of the Ethernet 1x10G High Performance Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernet1x10GHighPerCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.36.1.5
Temperature of the Ethernet 1x10G High Performance Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernet1x10GHighPerCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.36.1.6
Whether or not SNMP dying gasp is enabled on the Ethernet 1x10G High Performance Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernet1x10GHighPerCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.36.1.7
Allows to perform specified action on the Ethernet 1x10G High Performance card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernet1x10GHighPerCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.36.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernet1x10GHighPerCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.36.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernet1x10GHighPerCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTUCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernet1x10GHighPerCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernet1x10GHighPerCardForceOffLineAction 1.3.6.1.4.1.2544.1.12.3.1.36.1.10
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernet10x1GHighPerCardTable 1.3.6.1.4.1.2544.1.12.3.1.37
Contains information on Ethernet 10x1G High Performance Cards.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ethernet10x1GHighPerCardEntry

ethernet10x1GHighPerCardEntry 1.3.6.1.4.1.2544.1.12.3.1.37.1
A conceptual row in the ethernet10x1GHighPerCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ethernet10x1GHighPerCardEntry  

ethernet10x1GHighPerCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.37.1.1
Entity Index from ENTITY-MIB for the Ethernet 10x1G High Performance Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernet10x1GHighPerCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.37.1.2
Administrative State of the Ethernet 10x1G High Performance Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernet10x1GHighPerCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.37.1.3
Operational State of the Ethernet 10x1G High Performance Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernet10x1GHighPerCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.37.1.4
Secondary State of the Ethernet 10x1G High Performance Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernet10x1GHighPerCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.37.1.5
Temperature of the Ethernet 10x1G High Performance Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernet10x1GHighPerCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.37.1.6
Whether or not SNMP dying gasp is enabled on the Ethernet 10x1G High Performance Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernet10x1GHighPerCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.37.1.7
Allows to perform specified action on the Ethernet 10x1G High Performance card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernet10x1GHighPerCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.37.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernet10x1GHighPerCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.37.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernet10x1GHighPerCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernet10x1GHighPerCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernet10x1GHighPerCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernet10x1GHighPerCardForceOffLineAction 1.3.6.1.4.1.2544.1.12.3.1.37.1.10
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTET1804CardTable 1.3.6.1.4.1.2544.1.12.3.1.38
Contains information on Ethernet NTE T1804 Cards. These are supported on the FSP150CC T1804 product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTET1804CardEntry

ethernetNTET1804CardEntry 1.3.6.1.4.1.2544.1.12.3.1.38.1
A conceptual row in the ethernetNTET1804CardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTET1804CardEntry  

ethernetNTET1804CardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.38.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE T1804 Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTET1804CardAdminState 1.3.6.1.4.1.2544.1.12.3.1.38.1.2
Administrative State of the Ethernet NTE T1804 Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTET1804CardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.38.1.3
Operational State of the Ethernet NTE T1804 Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTET1804CardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.38.1.4
Secondary State of the Ethernet NTE T1804 Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTET1804CardVoltage 1.3.6.1.4.1.2544.1.12.3.1.38.1.5
Voltage of the Ethernet NTE GE112S Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTET1804CardTemperature 1.3.6.1.4.1.2544.1.12.3.1.38.1.6
Temperature of the Ethernet NTE T1804 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTET1804CardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.38.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE T1804 Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTET1804CardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.38.1.8
Allows to perform specified action on the Ethernet NTE T1804 card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTET1804CardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.38.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTET1804CardMode 1.3.6.1.4.1.2544.1.12.3.1.38.1.10
This attribute is to show/set E1/T1 mode of the NET T1804 card.
Status: current Access: read-write
OBJECT-TYPE    
  PortCarrierType  

ethernetNTET3204CardTable 1.3.6.1.4.1.2544.1.12.3.1.39
Contains information on Ethernet NTE T3204 Cards. These are supported on the FSP150CC T3204 product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTET3204CardEntry

ethernetNTET3204CardEntry 1.3.6.1.4.1.2544.1.12.3.1.39.1
A conceptual row in the ethernetNTET3204CardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTET3204CardEntry  

ethernetNTET3204CardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.39.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE T3204 Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTET3204CardAdminState 1.3.6.1.4.1.2544.1.12.3.1.39.1.2
Administrative State of the Ethernet NTE T3204 Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTET3204CardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.39.1.3
Operational State of the Ethernet NTE T3204 Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTET3204CardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.39.1.4
Secondary State of the Ethernet NTE T3204 Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTET3204CardVoltage 1.3.6.1.4.1.2544.1.12.3.1.39.1.5
Voltage of the Ethernet NTE GE112S Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTET3204CardTemperature 1.3.6.1.4.1.2544.1.12.3.1.39.1.6
Temperature of the Ethernet NTE T3204 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTET3204CardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.39.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE T3204 Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTET3204CardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.39.1.8
Allows to perform specified action on the Ethernet NTE T3204 card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTET3204CardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.39.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTET3204CardMode 1.3.6.1.4.1.2544.1.12.3.1.39.1.10
This attribute is to show/set E3/T3 mode of the NET T3204 card.
Status: current Access: read-write
OBJECT-TYPE    
  PortCarrierType  

ethernetNTEGESyncProbeCardTable 1.3.6.1.4.1.2544.1.12.3.1.40
Contains information on Ethernet NTE-GE SyncProbe Card. These are supported on the FSP150CC GE SyncProbe product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGESyncProbeCardEntry

ethernetNTEGESyncProbeCardEntry 1.3.6.1.4.1.2544.1.12.3.1.40.1
A conceptual row in the ethernetNTEGESyncProbeCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGESyncProbeCardEntry  

ethernetNTEGESyncProbeCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.40.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE SyncProbe Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGESyncProbeCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.40.1.2
Administrative State of the Ethernet NTE GE SyncProbe Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGESyncProbeCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.40.1.3
Operational State of the Ethernet NTE GE SyncProbe Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGESyncProbeCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.40.1.4
Secondary State of the Ethernet NTE GE SyncProbe Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGESyncProbeCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.40.1.5
Voltage of the Ethernet NTE GE SyncProbe Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGESyncProbeCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.40.1.6
Temperature of the Ethernet NTE GE SyncProbe Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGESyncProbeCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.40.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE SyncProbe Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGESyncProbeCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.40.1.8
Allows to perform specified action on the Ethernet NTE GE SyncProbe card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGESyncProbeCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.40.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetGE8SCCCardTable 1.3.6.1.4.1.2544.1.12.3.1.41
Contains information on Ethernet XG210/SH1PCS Optical Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetGE8SCCCardEntry

ethernetGE8SCCCardEntry 1.3.6.1.4.1.2544.1.12.3.1.41.1
A conceptual row in the ethernetGE8SCCCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetGE8SCCCardEntry  

ethernetGE8SCCCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.41.1.1
Entity Index from ENTITY-MIB for the Ethernet GE-8S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetGE8SCCCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.41.1.2
Administrative State of the Ethernet GE-8S Connector Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetGE8SCCCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.41.1.3
Operational State of the Ethernet GE-8S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetGE8SCCCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.41.1.4
Secondary State of the Ethernet GE-8S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetGE8SCCCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.41.1.5
Voltage of the Ethernet GE-8S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetGE8SCCCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.41.1.6
Temperature of the Ethernet GE-8S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetGE8SCCCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.41.1.7
Allows to perform specified action on the Ethernet GE-8S Connector card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetGE8SCCCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.41.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernetGE8SCCCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.41.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetGE8SCCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetGE8SCCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetGE8SCCCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernetNTEGE114HCardTable 1.3.6.1.4.1.2544.1.12.3.1.42
Contains information on Ethernet NTE GE114H Cards. These are supported on the FSP150CC GE114H product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE114HCardEntry

ethernetNTEGE114HCardEntry 1.3.6.1.4.1.2544.1.12.3.1.42.1
A conceptual row in the ethernetNTEGE114HCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE114HCardEntry  

ethernetNTEGE114HCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.42.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE114H Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE114HCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.42.1.2
Administrative State of the Ethernet NTE GE114H Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE114HCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.42.1.3
Operational State of the Ethernet NTE GE114H Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE114HCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.42.1.4
Secondary State of the Ethernet NTE GE114H Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE114HCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.42.1.5
Voltage of the Ethernet NTE GE112 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114HCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.42.1.6
Temperature of the Ethernet NTE GE114H Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114HCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.42.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114H Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE114HCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.42.1.8
Allows to perform specified action on the Ethernet NTE GE114H card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE114HCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.42.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE114HCardSwitchPortActionPort 1.3.6.1.4.1.2544.1.12.3.1.42.1.10
Which port to perform specified switch action on the Ethernet NTE GE114H card.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

ethernetNTEGE114HCardSwitchPortAction 1.3.6.1.4.1.2544.1.12.3.1.42.1.11
Allows to perform specified action on the Ethernet NTE GE114H card.
Status: current Access: read-write
OBJECT-TYPE    
  SwitchPortAction  

ethernetNTEGE114PHCardTable 1.3.6.1.4.1.2544.1.12.3.1.43
Contains information on Ethernet NTE GE114PH Cards. These are supported on the FSP150CC GE114PH product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE114PHCardEntry

ethernetNTEGE114PHCardEntry 1.3.6.1.4.1.2544.1.12.3.1.43.1
A conceptual row in the ethernetNTEGE114PHCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE114PHCardEntry  

ethernetNTEGE114PHCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.43.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE114PH Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE114PHCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.43.1.2
Administrative State of the Ethernet NTE GE114PH Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE114PHCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.43.1.3
Operational State of the Ethernet NTE GE114PH Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE114PHCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.43.1.4
Secondary State of the Ethernet NTE GE114PH Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE114PHCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.43.1.5
Voltage of the Ethernet NTE GE112 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114PHCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.43.1.6
Temperature of the Ethernet NTE GE114PH Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114PHCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.43.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114PH Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE114PHCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.43.1.8
Allows to perform specified action on the Ethernet NTE GE114PH card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE114PHCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.43.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE114PHCardSwitchPortActionPort 1.3.6.1.4.1.2544.1.12.3.1.43.1.10
Which port to perform specified switch action on the Ethernet NTE GE114PH card.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

ethernetNTEGE114PHCardSwitchPortAction 1.3.6.1.4.1.2544.1.12.3.1.43.1.11
Allows to perform specified action on the Ethernet NTE GE114PH card.
Status: current Access: read-write
OBJECT-TYPE    
  SwitchPortAction  

ethernetFE36ECardTable 1.3.6.1.4.1.2544.1.12.3.1.44
Contains information on Ethernet 36x100M Cards.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetFE36ECardEntry

ethernetFE36ECardEntry 1.3.6.1.4.1.2544.1.12.3.1.44.1
A conceptual row in the ethernetFE36ECardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetFE36ECardEntry  

ethernetFE36ECardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.44.1.1
Entity Index from ENTITY-MIB for the Ethernet FE36E Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetFE36ECardAdminState 1.3.6.1.4.1.2544.1.12.3.1.44.1.2
Administrative State of the Ethernet FE36E Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetFE36ECardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.44.1.3
Operational State of the Ethernet FE36E Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetFE36ECardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.44.1.4
Secondary State of the Ethernet FE36E Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetFE36ECardTemperature 1.3.6.1.4.1.2544.1.12.3.1.44.1.5
Temperature of the Ethernet FE36E Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetFE36ECardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.44.1.6
Allows to perform specified action on the Ethernet FE36E card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetFE36ECardStorageType 1.3.6.1.4.1.2544.1.12.3.1.44.1.7
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernetFE36ECardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.44.1.8
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetFE36ECardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTUCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetFE36ECardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernetFE36ECardForceOffLineAction 1.3.6.1.4.1.2544.1.12.3.1.44.1.9
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetFE36ECard8023azEnabled 1.3.6.1.4.1.2544.1.12.3.1.44.1.10
This object describes whether enable 802.3az energy efficient.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE114SHCardTable 1.3.6.1.4.1.2544.1.12.3.1.45
Contains information on Ethernet NTE GE114SH Cards. These are supported on the FSP150CC GE114SH product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE114SHCardEntry

ethernetNTEGE114SHCardEntry 1.3.6.1.4.1.2544.1.12.3.1.45.1
A conceptual row in the ethernetNTEGE114SHCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE114SHCardEntry  

ethernetNTEGE114SHCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.45.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE114SH Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE114SHCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.45.1.2
Administrative State of the Ethernet NTE GE114SH Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE114SHCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.45.1.3
Operational State of the Ethernet NTE GE114SH Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE114SHCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.45.1.4
Secondary State of the Ethernet NTE GE114SH Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE114SHCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.45.1.5
Voltage of the Ethernet NTE GE112 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114SHCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.45.1.6
Temperature of the Ethernet NTE GE114SH Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114SHCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.45.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114SH Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE114SHCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.45.1.8
Allows to perform specified action on the Ethernet NTE GE114SH card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE114SHCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.45.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE114SHCardSwitchPortActionPort 1.3.6.1.4.1.2544.1.12.3.1.45.1.10
Which port to perform specified switch action on the Ethernet NTE GE114SH card.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

ethernetNTEGE114SHCardSwitchPortAction 1.3.6.1.4.1.2544.1.12.3.1.45.1.11
Allows to perform specified action on the Ethernet NTE GE114SH card.
Status: current Access: read-write
OBJECT-TYPE    
  SwitchPortAction  

ethernetNTEGE114SCardTable 1.3.6.1.4.1.2544.1.12.3.1.46
Contains information on Ethernet NTE GE114S Cards. These are supported on the FSP150CC GE114S product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE114SCardEntry

ethernetNTEGE114SCardEntry 1.3.6.1.4.1.2544.1.12.3.1.46.1
A conceptual row in the ethernetNTEGE114SCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE114SCardEntry  

ethernetNTEGE114SCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.46.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE114S Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE114SCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.46.1.2
Administrative State of the Ethernet NTE GE114S Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE114SCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.46.1.3
Operational State of the Ethernet NTE GE114S Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE114SCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.46.1.4
Secondary State of the Ethernet NTE GE114S Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE114SCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.46.1.5
Voltage of the Ethernet NTE GE112S Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114SCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.46.1.6
Temperature of the Ethernet NTE GE114S Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114SCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.46.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114S Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE114SCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.46.1.8
Allows to perform specified action on the Ethernet NTE GE114S card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE114SCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.46.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE114SCardSwitchPortActionPort 1.3.6.1.4.1.2544.1.12.3.1.46.1.10
Which port to perform specified switch action on the Ethernet NTE GE114S card.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

ethernetNTEGE114SCardSwitchPortAction 1.3.6.1.4.1.2544.1.12.3.1.46.1.11
Allows to perform specified action on the Ethernet NTE GE114S card.
Status: current Access: read-write
OBJECT-TYPE    
  SwitchPortAction  

stuHighPerCardTable 1.3.6.1.4.1.2544.1.12.3.1.47
Contains information on STU Cards.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StuHighPerCardEntry

stuHighPerCardEntry 1.3.6.1.4.1.2544.1.12.3.1.47.1
A conceptual row in the stuHighPerCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  StuHighPerCardEntry  

stuHighPerCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.47.1.1
Entity Index from ENTITY-MIB for the STU High Performance Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

stuHighPerCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.47.1.2
Administrative State of the Stu High Performance Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

stuHighPerCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.47.1.3
Operational State of the Stu High Performance Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

stuHighPerCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.47.1.4
Secondary State of the Stu High Performance Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

stuHighPerCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.47.1.5
Temperature of the Stu High Performance Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuHighPerCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.47.1.6
Allows to perform specified action on the Stu High Performance card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

stuHighPerCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.47.1.7
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

stuHighPerCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.47.1.8
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stuHighPerCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stuRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stuHighPerCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

stuHighPerCardForceOffLineAction 1.3.6.1.4.1.2544.1.12.3.1.47.1.9
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

stiHighPerTable 1.3.6.1.4.1.2544.1.12.3.1.48
Contains information on STI within the Shelf.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StiHighPerEntry

stiHighPerEntry 1.3.6.1.4.1.2544.1.12.3.1.48.1
A conceptual row in the stiTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  StiHighPerEntry  

stiHighPerEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.48.1.1
Entity Index from ENTITY-MIB for the STI High Per card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

stiHighPerAdminState 1.3.6.1.4.1.2544.1.12.3.1.48.1.2
Administrative State of the STI.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

stiHighPerOperationalState 1.3.6.1.4.1.2544.1.12.3.1.48.1.3
Operational State of the STI.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

stiHighPerSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.48.1.4
Secondary State of the STI.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

stiHighPerTemperature 1.3.6.1.4.1.2544.1.12.3.1.48.1.5
Temperature of the STI.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stiHighPerStorageType 1.3.6.1.4.1.2544.1.12.3.1.48.1.6
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

stiHighPerRowStatus 1.3.6.1.4.1.2544.1.12.3.1.48.1.7
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stiRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stiRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stiRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernetGE8ECCCardTable 1.3.6.1.4.1.2544.1.12.3.1.49
Contains information on Ethernet XG210 Optical Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS products.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetGE8ECCCardEntry

ethernetGE8ECCCardEntry 1.3.6.1.4.1.2544.1.12.3.1.49.1
A conceptual row in the ethernetGE8ECCCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetGE8ECCCardEntry  

ethernetGE8ECCCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.49.1.1
Entity Index from ENTITY-MIB for the Ethernet GE-8S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetGE8ECCCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.49.1.2
Administrative State of the Ethernet GE-8S Connector Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetGE8ECCCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.49.1.3
Operational State of the Ethernet GE-8S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetGE8ECCCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.49.1.4
Secondary State of the Ethernet GE-8S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetGE8ECCCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.49.1.5
Voltage of the Ethernet GE-8S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetGE8ECCCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.49.1.6
Temperature of the Ethernet GE-8S Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetGE8ECCCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.49.1.7
Allows to perform specified action on the Ethernet GE-8S Connector card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetGE8ECCCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.49.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernetGE8ECCCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.49.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetGE8ECCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetGE8ECCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetGE8ECCCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

networkElementLLDPParamsTable 1.3.6.1.4.1.2544.1.12.3.1.50
Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NetworkElementLLDPParamsEntry

networkElementLLDPParamsEntry 1.3.6.1.4.1.2544.1.12.3.1.50.1
A conceptual row in the networkElementLLDPParamsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NetworkElementLLDPParamsEntry  

neLLDPParamsLLDPEnableAction 1.3.6.1.4.1.2544.1.12.3.1.50.1.1
This object allows user enable or disable LLDP on all the ports in the NE.
Status: current Access: read-create
OBJECT-TYPE    
  LLDPEnableAction  

ethernetNTESH1PCSCardTable 1.3.6.1.4.1.2544.1.12.3.1.51
Contains information on Ethernet NTE SH1PCS Cards. These are supported on the FSP150CC SH1PCS product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTESH1PCSCardEntry

ethernetNTESH1PCSCardEntry 1.3.6.1.4.1.2544.1.12.3.1.51.1
A conceptual row in the ethernetNTESH1PCSCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTESH1PCSCardEntry  

ethernetNTESH1PCSCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.51.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE SH1PCS Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTESH1PCSCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.51.1.2
Administrative State of the Ethernet NTE SH1PCS Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTESH1PCSCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.51.1.3
Operational State of the Ethernet NTE SH1PCS Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTESH1PCSCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.51.1.4
Secondary State of the Ethernet NTE SH1PCS Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTESH1PCSCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.51.1.5
Voltage of the Ethernet NTE SH1PCS Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTESH1PCSCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.51.1.6
Temperature of the Ethernet NTE SH1PCS Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTESH1PCSCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.51.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE SH1PCS Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTESH1PCSCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.51.1.8
Allows to perform specified action on the Ethernet NTE SH1PCS card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTESH1PCSCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.51.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEOSA5411CardTable 1.3.6.1.4.1.2544.1.12.3.1.52
Contains information on Ethernet NTE OSA5411 Card. These are supported on the FSP150CC OSA5411 product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEOSA5411CardEntry

ethernetNTEOSA5411CardEntry 1.3.6.1.4.1.2544.1.12.3.1.52.1
A conceptual row in the ethernetNTEOSA5411CardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEOSA5411CardEntry  

ethernetNTEOSA5411CardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.52.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE OSA5411 Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEOSA5411CardAdminState 1.3.6.1.4.1.2544.1.12.3.1.52.1.2
Administrative State of the Ethernet NTE OSA5411 Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEOSA5411CardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.52.1.3
Operational State of the Ethernet NTE OSA5411 Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEOSA5411CardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.52.1.4
Secondary State of the Ethernet NTE OSA5411 Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEOSA5411CardVoltage 1.3.6.1.4.1.2544.1.12.3.1.52.1.5
Voltage of the Ethernet NTE OSA5411 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEOSA5411CardTemperature 1.3.6.1.4.1.2544.1.12.3.1.52.1.6
Temperature of the Ethernet NTE OSA5411 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEOSA5411CardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.52.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE OSA5411 Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEOSA5411CardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.52.1.8
Allows to perform specified action on the Ethernet NTE OSA5411 card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEOSA5411CardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.52.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE112ProCardTable 1.3.6.1.4.1.2544.1.12.3.1.53
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE112ProCardEntry

ethernetNTEGE112ProCardEntry 1.3.6.1.4.1.2544.1.12.3.1.53.1
A conceptual row in the ethernetNTEGE112ProCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE112ProCardEntry  

ethernetNTEGE112ProCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.53.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE112ProCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.53.1.2
Administrative State of the Ethernet NTE GE112 Pro Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE112ProCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.53.1.3
Operational State of the Ethernet NTE GE112Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE112ProCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.53.1.4
Secondary State of the Ethernet NTE GE112Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE112ProCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.53.1.5
Voltage of the Ethernet NTE GE112Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE112ProCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.53.1.6
Temperature of the Ethernet NTE GE112Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE112ProCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.53.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112Pro Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE112ProCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.53.1.8
Allows to perform specified action on the Ethernet NTE GE112Pro card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE112ProCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.53.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE112ProCardSwitchPortActionPort 1.3.6.1.4.1.2544.1.12.3.1.53.1.10
Which port to perform specified switch action on the Ethernet NTE GE112Pro card.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

ethernetNTEGE112ProCardSwitchPortAction 1.3.6.1.4.1.2544.1.12.3.1.53.1.11
Allows to perform specified action on the Ethernet NTE GE112Pro card.
Status: current Access: read-write
OBJECT-TYPE    
  SwitchPortAction  

ethernetNTEGE112ProMCardTable 1.3.6.1.4.1.2544.1.12.3.1.54
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE112ProMCardEntry

ethernetNTEGE112ProMCardEntry 1.3.6.1.4.1.2544.1.12.3.1.54.1
A conceptual row in the ethernetNTEGE112ProMCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE112ProMCardEntry  

ethernetNTEGE112ProMCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.54.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE112ProMCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.54.1.2
Administrative State of the Ethernet NTE GE112 Pro Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE112ProMCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.54.1.3
Operational State of the Ethernet NTE GE112ProM Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE112ProMCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.54.1.4
Secondary State of the Ethernet NTE GE112ProM Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE112ProMCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.54.1.5
Voltage of the Ethernet NTE GE112ProM Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE112ProMCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.54.1.6
Temperature of the Ethernet NTE GE112ProM Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE112ProMCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.54.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112ProM Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE112ProMCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.54.1.8
Allows to perform specified action on the Ethernet NTE GE112ProM card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE112ProMCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.54.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE112ProMCardSwitchPortActionPort 1.3.6.1.4.1.2544.1.12.3.1.54.1.10
Which port to perform specified switch action on the Ethernet NTE GE112ProM card.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

ethernetNTEGE112ProMCardSwitchPortAction 1.3.6.1.4.1.2544.1.12.3.1.54.1.11
Allows to perform specified action on the Ethernet NTE GE112ProM card.
Status: current Access: read-write
OBJECT-TYPE    
  SwitchPortAction  

ethernetNTEXG210CCardTable 1.3.6.1.4.1.2544.1.12.3.1.55
Contains information on Ethernet NTE XG210 Cards. These are supported on the FSP150CC XG210 product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEXG210CCardEntry

ethernetNTEXG210CCardEntry 1.3.6.1.4.1.2544.1.12.3.1.55.1
A conceptual row in the ethernetNTEXG210CCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEXG210CCardEntry  

ethernetNTEXG210CCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.55.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE XG210C Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEXG210CCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.55.1.2
Administrative State of the Ethernet NTE XG210C Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEXG210CCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.55.1.3
Operational State of the Ethernet NTE XG210C Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEXG210CCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.55.1.4
Secondary State of the Ethernet NTE XG210C Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEXG210CCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.55.1.5
Voltage of the Ethernet NTE XG210C Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEXG210CCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.55.1.6
Temperature of the Ethernet NTE XG210C Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEXG210CCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.55.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG210C Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEXG210CCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.55.1.8
Allows to perform specified action on the Ethernet NTE XG210 card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEXG210CCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.55.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetGE8SCryptoConnectorCardTable 1.3.6.1.4.1.2544.1.12.3.1.56
Contains information on Ethernet XG210C Optical Port Expander Cards. These are supported on the XG210C MACSEC board.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetGE8SCryptoConnectorCardEntry

ethernetGE8SCryptoConnectorCardEntry 1.3.6.1.4.1.2544.1.12.3.1.56.1
A conceptual row in the ethernetGE8SCryptoConnectorCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetGE8SCryptoConnectorCardEntry  

ethernetGE8SCryptoConnectorCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.56.1.1
Entity Index from ENTITY-MIB for the Ethernet GE-8SC Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetGE8SCryptoConnectorCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.56.1.2
Administrative State of the Ethernet GE-8SC Connector Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetGE8SCryptoConnectorCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.56.1.3
Operational State of the Ethernet GE-8SC Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetGE8SCryptoConnectorCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.56.1.4
Secondary State of the Ethernet GE-8SC Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetGE8SCryptoConnectorCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.56.1.5
Voltage of the Ethernet GE-8SC Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetGE8SCryptoConnectorCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.56.1.6
Temperature of the Ethernet GE-8SC Connector Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetGE8SCryptoConnectorCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.56.1.7
Allows to perform specified action on the Ethernet GE-8SC Connector card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetGE8SCryptoConnectorCardStorageType 1.3.6.1.4.1.2544.1.12.3.1.56.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ethernetGE8SCryptoConnectorCardRowStatus 1.3.6.1.4.1.2544.1.12.3.1.56.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetGE8SCryptoConnectorCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetGE8SCryptoConnectorCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetGE8SCryptoConnectorCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernetNTEGE114ProCardTable 1.3.6.1.4.1.2544.1.12.3.1.57
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE114ProCardEntry

ethernetNTEGE114ProCardEntry 1.3.6.1.4.1.2544.1.12.3.1.57.1
A conceptual row in the ethernetNTEGE114ProCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE114ProCardEntry  

ethernetNTEGE114ProCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.57.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE114ProCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.57.1.2
Administrative State of the Ethernet NTE GE112 Pro Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE114ProCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.57.1.3
Operational State of the Ethernet NTE GE114Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE114ProCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.57.1.4
Secondary State of the Ethernet NTE GE114Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE114ProCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.57.1.5
Voltage of the Ethernet NTE GE114Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114ProCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.57.1.6
Temperature of the Ethernet NTE GE114Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114ProCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.57.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114Pro Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE114ProCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.57.1.8
Allows to perform specified action on the Ethernet NTE GE114Pro card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE114ProCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.57.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE114ProCardSwitchPortActionPort 1.3.6.1.4.1.2544.1.12.3.1.57.1.10
Which port to perform specified switch action on the Ethernet NTE GE114Pro card.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

ethernetNTEGE114ProCardSwitchPortAction 1.3.6.1.4.1.2544.1.12.3.1.57.1.11
Allows to perform specified action on the Ethernet NTE GE114Pro card.
Status: current Access: read-write
OBJECT-TYPE    
  SwitchPortAction  

ethernetNTEGE114ProCCardTable 1.3.6.1.4.1.2544.1.12.3.1.58
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE114ProCCardEntry

ethernetNTEGE114ProCCardEntry 1.3.6.1.4.1.2544.1.12.3.1.58.1
A conceptual row in the ethernetNTEGE114ProCCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE114ProCCardEntry  

ethernetNTEGE114ProCCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.58.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE114ProCCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.58.1.2
Administrative State of the Ethernet NTE GE112 Pro Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE114ProCCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.58.1.3
Operational State of the Ethernet NTE GE114ProC Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE114ProCCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.58.1.4
Secondary State of the Ethernet NTE GE114ProC Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE114ProCCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.58.1.5
Voltage of the Ethernet NTE GE114ProC Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114ProCCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.58.1.6
Temperature of the Ethernet NTE GE114ProC Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114ProCCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.58.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProC Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE114ProCCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.58.1.8
Allows to perform specified action on the Ethernet NTE GE114ProC card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE114ProCCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.58.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE114ProCCardSwitchPortActionPort 1.3.6.1.4.1.2544.1.12.3.1.58.1.10
Which port to perform specified switch action on the Ethernet NTE GE114ProC card.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

ethernetNTEGE114ProCCardSwitchPortAction 1.3.6.1.4.1.2544.1.12.3.1.58.1.11
Allows to perform specified action on the Ethernet NTE GE114ProC card.
Status: current Access: read-write
OBJECT-TYPE    
  SwitchPortAction  

ethernetNTEGE114ProSHCardTable 1.3.6.1.4.1.2544.1.12.3.1.59
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE114ProSHCardEntry

ethernetNTEGE114ProSHCardEntry 1.3.6.1.4.1.2544.1.12.3.1.59.1
A conceptual row in the ethernetNTEGE114ProSHCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE114ProSHCardEntry  

ethernetNTEGE114ProSHCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.59.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE114ProSHCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.59.1.2
Administrative State of the Ethernet NTE GE112 Pro Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE114ProSHCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.59.1.3
Operational State of the Ethernet NTE GE114ProS Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE114ProSHCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.59.1.4
Secondary State of the Ethernet NTE GE114ProS Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE114ProSHCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.59.1.5
Voltage of the Ethernet NTE GE114ProS Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114ProSHCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.59.1.6
Temperature of the Ethernet NTE GE114ProS Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114ProSHCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.59.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProS Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE114ProSHCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.59.1.8
Allows to perform specified action on the Ethernet NTE GE114ProS card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE114ProSHCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.59.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE114ProSHCardSwitchPortActionPort 1.3.6.1.4.1.2544.1.12.3.1.59.1.10
Which port to perform specified switch action on the Ethernet NTE GE114ProSH card.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

ethernetNTEGE114ProSHCardSwitchPortAction 1.3.6.1.4.1.2544.1.12.3.1.59.1.11
Allows to perform specified action on the Ethernet NTE GE114ProSH card.
Status: current Access: read-write
OBJECT-TYPE    
  SwitchPortAction  

ethernetNTEGE114ProCSHCardTable 1.3.6.1.4.1.2544.1.12.3.1.60
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE114ProCSHCardEntry

ethernetNTEGE114ProCSHCardEntry 1.3.6.1.4.1.2544.1.12.3.1.60.1
A conceptual row in the ethernetNTEGE114ProCSHCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE114ProCSHCardEntry  

ethernetNTEGE114ProCSHCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.60.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE114ProCSHCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.60.1.2
Administrative State of the Ethernet NTE GE112 Pro Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE114ProCSHCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.60.1.3
Operational State of the Ethernet NTE GE114ProCS Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE114ProCSHCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.60.1.4
Secondary State of the Ethernet NTE GE114ProCS Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE114ProCSHCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.60.1.5
Voltage of the Ethernet NTE GE114ProCS Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114ProCSHCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.60.1.6
Temperature of the Ethernet NTE GE114ProCS Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114ProCSHCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.60.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProCS Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE114ProCSHCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.60.1.8
Allows to perform specified action on the Ethernet NTE GE114ProCS card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE114ProCSHCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.60.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE114ProCSHCardSwitchPortActionPort 1.3.6.1.4.1.2544.1.12.3.1.60.1.10
Which port to perform specified switch action on the Ethernet NTE GE114ProCS card.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

ethernetNTEGE114ProCSHCardSwitchPortAction 1.3.6.1.4.1.2544.1.12.3.1.60.1.11
Allows to perform specified action on the Ethernet NTE GE114ProCS card.
Status: current Access: read-write
OBJECT-TYPE    
  SwitchPortAction  

ethernetNTEGE114ProHECardTable 1.3.6.1.4.1.2544.1.12.3.1.61
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE114ProHECardEntry

ethernetNTEGE114ProHECardEntry 1.3.6.1.4.1.2544.1.12.3.1.61.1
A conceptual row in the ethernetNTEGE114ProHECardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE114ProHECardEntry  

ethernetNTEGE114ProHECardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.61.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE114ProHECardAdminState 1.3.6.1.4.1.2544.1.12.3.1.61.1.2
Administrative State of the Ethernet NTE GE112 Pro Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE114ProHECardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.61.1.3
Operational State of the Ethernet NTE GE114ProHE Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE114ProHECardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.61.1.4
Secondary State of the Ethernet NTE GE114ProHE Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE114ProHECardVoltage 1.3.6.1.4.1.2544.1.12.3.1.61.1.5
Voltage of the Ethernet NTE GE114ProHE Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114ProHECardTemperature 1.3.6.1.4.1.2544.1.12.3.1.61.1.6
Temperature of the Ethernet NTE GE114ProHE Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114ProHECardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.61.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProHE Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE114ProHECardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.61.1.8
Allows to perform specified action on the Ethernet NTE GE114ProHE card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE114ProHECardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.61.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE114ProHECardSwitchPortActionPort 1.3.6.1.4.1.2544.1.12.3.1.61.1.10
Which port to perform specified switch action on the Ethernet NTE GE114ProHE card.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

ethernetNTEGE114ProHECardSwitchPortAction 1.3.6.1.4.1.2544.1.12.3.1.61.1.11
Allows to perform specified action on the Ethernet NTE GE114ProHE card.
Status: current Access: read-write
OBJECT-TYPE    
  SwitchPortAction  

ethernetNTEGE112ProHCardTable 1.3.6.1.4.1.2544.1.12.3.1.62
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE112ProHCardEntry

ethernetNTEGE112ProHCardEntry 1.3.6.1.4.1.2544.1.12.3.1.62.1
A conceptual row in the ethernetNTEGE112ProHCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE112ProHCardEntry  

ethernetNTEGE112ProHCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.62.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE112ProHCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.62.1.2
Administrative State of the Ethernet NTE GE112 Pro Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE112ProHCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.62.1.3
Operational State of the Ethernet NTE GE112ProH Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE112ProHCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.62.1.4
Secondary State of the Ethernet NTE GE112ProH Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE112ProHCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.62.1.5
Voltage of the Ethernet NTE GE112ProH Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE112ProHCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.62.1.6
Temperature of the Ethernet NTE GE112ProH Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE112ProHCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.62.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112ProH Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE112ProHCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.62.1.8
Allows to perform specified action on the Ethernet NTE GE112ProH card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE112ProHCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.62.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE112ProHCardSwitchPortActionPort 1.3.6.1.4.1.2544.1.12.3.1.62.1.10
Which port to perform specified switch action on the Ethernet NTE GE112ProH card.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

ethernetNTEGE112ProHCardSwitchPortAction 1.3.6.1.4.1.2544.1.12.3.1.62.1.11
Allows to perform specified action on the Ethernet NTE GE112ProH card.
Status: current Access: read-write
OBJECT-TYPE    
  SwitchPortAction  

ethernetNTEOSA5420CardTable 1.3.6.1.4.1.2544.1.12.3.1.63
Contains information on Ethernet NTE OSA5420 Card. These are supported on the FSP150CC OSA5420 product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEOSA5420CardEntry

ethernetNTEOSA5420CardEntry 1.3.6.1.4.1.2544.1.12.3.1.63.1
A conceptual row in the ethernetNTEOSA5420CardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEOSA5420CardEntry  

ethernetNTEOSA5420CardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.63.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE OSA5420 Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEOSA5420CardAdminState 1.3.6.1.4.1.2544.1.12.3.1.63.1.2
Administrative State of the Ethernet NTE OSA5420 Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEOSA5420CardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.63.1.3
Operational State of the Ethernet NTE OSA5420 Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEOSA5420CardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.63.1.4
Secondary State of the Ethernet NTE OSA5420 Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEOSA5420CardVoltage 1.3.6.1.4.1.2544.1.12.3.1.63.1.5
Voltage of the Ethernet NTE OSA5420 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEOSA5420CardTemperature 1.3.6.1.4.1.2544.1.12.3.1.63.1.6
Temperature of the Ethernet NTE OSA5420 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEOSA5420CardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.63.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE OSA5420 Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEOSA5420CardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.63.1.8
Allows to perform specified action on the Ethernet NTE OSA5420 card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEOSA5420CardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.63.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEOSA5421CardTable 1.3.6.1.4.1.2544.1.12.3.1.64
Contains information on Ethernet NTE OSA5421 Card. These are supported on the FSP150CC OSA5421 product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEOSA5421CardEntry

ethernetNTEOSA5421CardEntry 1.3.6.1.4.1.2544.1.12.3.1.64.1
A conceptual row in the ethernetNTEOSA5421CardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEOSA5421CardEntry  

ethernetNTEOSA5421CardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.64.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE OSA5421 Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEOSA5421CardAdminState 1.3.6.1.4.1.2544.1.12.3.1.64.1.2
Administrative State of the Ethernet NTE OSA5421 Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEOSA5421CardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.64.1.3
Operational State of the Ethernet NTE OSA5421 Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEOSA5421CardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.64.1.4
Secondary State of the Ethernet NTE OSA5421 Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEOSA5421CardVoltage 1.3.6.1.4.1.2544.1.12.3.1.64.1.5
Voltage of the Ethernet NTE OSA5421 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEOSA5421CardTemperature 1.3.6.1.4.1.2544.1.12.3.1.64.1.6
Temperature of the Ethernet NTE OSA5421 Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEOSA5421CardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.64.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE OSA5421 Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEOSA5421CardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.64.1.8
Allows to perform specified action on the Ethernet NTE OSA5421 card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEOSA5421CardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.64.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE114GCardTable 1.3.6.1.4.1.2544.1.12.3.1.65
Contains information on Ethernet NTE GE114G Cards. These are supported on the FSP150CC GE114G product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetNTEGE114GCardEntry

ethernetNTEGE114GCardEntry 1.3.6.1.4.1.2544.1.12.3.1.65.1
A conceptual row in the ethernetNTEGE114GCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetNTEGE114GCardEntry  

ethernetNTEGE114GCardEntityIndex 1.3.6.1.4.1.2544.1.12.3.1.65.1.1
Entity Index from ENTITY-MIB for the Ethernet NTE GE114G Card.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

ethernetNTEGE114GCardAdminState 1.3.6.1.4.1.2544.1.12.3.1.65.1.2
Administrative State of the Ethernet NTE GE114G Card.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

ethernetNTEGE114GCardOperationalState 1.3.6.1.4.1.2544.1.12.3.1.65.1.3
Operational State of the Ethernet NTE GE114G Card.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

ethernetNTEGE114GCardSecondaryState 1.3.6.1.4.1.2544.1.12.3.1.65.1.4
Secondary State of the Ethernet NTE GE114G Card.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

ethernetNTEGE114GCardVoltage 1.3.6.1.4.1.2544.1.12.3.1.65.1.5
Voltage of the Ethernet NTE GE114G Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114GCardTemperature 1.3.6.1.4.1.2544.1.12.3.1.65.1.6
Temperature of the Ethernet NTE GE114G Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ethernetNTEGE114GCardSnmpDyingGaspEnabled 1.3.6.1.4.1.2544.1.12.3.1.65.1.7
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114G Card.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ethernetNTEGE114GCardRestartAction 1.3.6.1.4.1.2544.1.12.3.1.65.1.8
Allows to perform specified action on the Ethernet NTE GE114G card.
Status: current Access: read-write
OBJECT-TYPE    
  RestartType  

ethernetNTEGE114GCardFineGrainedPmInterval 1.3.6.1.4.1.2544.1.12.3.1.65.1.9
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmIntervalType  

ethernetNTEGE114GCardSwitchPortActionPort 1.3.6.1.4.1.2544.1.12.3.1.65.1.10
Which port to perform specified switch action on the Ethernet NTE GE114G card.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

ethernetNTEGE114GCardSwitchPortAction 1.3.6.1.4.1.2544.1.12.3.1.65.1.11
Allows to perform specified action on the Ethernet NTE GE114G card.
Status: current Access: read-write
OBJECT-TYPE    
  SwitchPortAction  

cmEntityCompliances 1.3.6.1.4.1.2544.1.12.3.2.1
OBJECT IDENTIFIER    

cmEntityGroups 1.3.6.1.4.1.2544.1.12.3.2.2
OBJECT IDENTIFIER    

cmEntityCompliance 1.3.6.1.4.1.2544.1.12.3.2.1.1
Describes the requirements for conformance to the CM Entity group.
Status: current Access: read-write
MODULE-COMPLIANCE    

cmEntityObjectGroup 1.3.6.1.4.1.2544.1.12.3.2.2.1
*************** THIS OBJECT GROUP IS DEPRECATED ****************** A collection of objects used to manage the CM Entity group.
Status: deprecated Access: read-write
OBJECT-GROUP    

commonEntityGroup 1.3.6.1.4.1.2544.1.12.3.2.2.2
A collection of common objects used to manage any F3 product family product.
Status: current Access: read-write
OBJECT-GROUP    

psuGroup 1.3.6.1.4.1.2544.1.12.3.2.2.3
A collection of objects used to manage the F3 Power Supply units.
Status: current Access: read-write
OBJECT-GROUP    

fanGroup 1.3.6.1.4.1.2544.1.12.3.2.2.4
A collection of objects used to manage the F3 Fan units.
Status: current Access: read-write
OBJECT-GROUP    

hubshelfGroup 1.3.6.1.4.1.2544.1.12.3.2.2.5
A collection of objects used to manage the CM Hub Shelf entities.
Status: current Access: read-write
OBJECT-GROUP    

nteGe206CardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.6
A collection of objects used to manage the GE206 Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe201SyncECardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.7
A collection of objects used to manage the GE201 Sync Ethernet Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe201NonSyncECardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.8
A collection of objects used to manage the GE201 Non SyncE Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe206FCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.9
A collection of objects used to manage the GE206F Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe112CardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.10
A collection of objects used to manage the GE112 Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe114CardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.11
A collection of objects used to manage the GE114 Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe206VCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.12
A collection of objects used to manage the GE206V Card.
Status: current Access: read-write
OBJECT-GROUP    

nteXg210CardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.13
A collection of objects used to manage the XG210 Card.
Status: current Access: read-write
OBJECT-GROUP    

pseudoWireCardOcnStmCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.14
A collection of objects used to manage the Pseudo Wire OCN/STM Card.
Status: current Access: read-write
OBJECT-GROUP    

pseudoWireCardE1T1CardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.15
A collection of objects used to manage the Pseudo Wire E1/T1 Card.
Status: current Access: read-write
OBJECT-GROUP    

nteT1804CardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.16
A collection of objects used to manage the T1804 Card.
Status: current Access: read-write
OBJECT-GROUP    

nteT3204CardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.17
A collection of objects used to manage the T3204 Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGeSyncProbeCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.18
A collection of objects used to manage the GE SyncProbe Card.
Status: current Access: read-write
OBJECT-GROUP    

xg1XCCCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.19
A collection of objects used to manage the XG 1X CC Card.
Status: current Access: read-write
OBJECT-GROUP    

xg1SCCCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.20
A collection of objects used to manage the XG 1S CC Card.
Status: current Access: read-write
OBJECT-GROUP    

ge4ECCCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.21
A collection of objects used to manage the GE 4E CC Card.
Status: current Access: read-write
OBJECT-GROUP    

ge4SCCCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.22
A collection of objects used to manage the GE 4S CC Card.
Status: current Access: read-write
OBJECT-GROUP    

ge8SCCCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.23
A collection of objects used to manage the GE 8S CC Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe114HCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.24
A collection of objects used to manage the GE114H Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe114PHCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.25
A collection of objects used to manage the GE114PH Card.
Status: current Access: read-write
OBJECT-GROUP    

ethernetOverOCSTMCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.26
A collection of objects used to manage the cards.
Status: current Access: read-write
OBJECT-GROUP    

ethernet1x10GHighPerCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.27
A collection of objects used to manage the cards.
Status: current Access: read-write
OBJECT-GROUP    

ethernetFE36ECardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.28
A collection of objects used to manage the cards.
Status: current Access: read-write
OBJECT-GROUP    

nteGe114SHCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.29
A collection of objects used to manage the GE114SH Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe114SCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.30
A collection of objects used to manage the GE114S Card.
Status: current Access: read-write
OBJECT-GROUP    

ge8ECCCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.31
A collection of objects used to manage the GE 8E CC Card.
Status: current Access: read-write
OBJECT-GROUP    

neLLDPParamsGroup 1.3.6.1.4.1.2544.1.12.3.2.2.32
A collection of objects used to manage the LLDP params on NE.
Status: current Access: read-write
OBJECT-GROUP    

nteSh1PcsCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.33
A collection of objects used to manage the SH1PCS Card.
Status: current Access: read-write
OBJECT-GROUP    

nteOsa5411CardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.34
A collection of objects used to manage the OSA5411 Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe112ProCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.35
A collection of objects used to manage the GE112Pro Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe112ProMCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.36
A collection of objects used to manage the GE112ProM Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe114ProCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.37
A collection of objects used to manage the GE114Pro Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe114ProCCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.38
A collection of objects used to manage the GE114ProC Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe114ProSHCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.39
A collection of objects used to manage the GE114ProSH Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe114ProCSHCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.40
A collection of objects used to manage the GE114ProCSH Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe114ProHECardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.41
A collection of objects used to manage the GE114ProHE Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe112ProHCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.42
A collection of objects used to manage the GE112ProH Card.
Status: current Access: read-write
OBJECT-GROUP    

nteXg210CCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.43
A collection of objects used to manage the XG210 Card.
Status: current Access: read-write
OBJECT-GROUP    

geGE8SCryptoConnectorCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.44
A collection of objects used to manage the GE 8S CC Card.
Status: current Access: read-write
OBJECT-GROUP    

nteOsa5420CardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.45
A collection of objects used to manage the OSA5420 Card.
Status: current Access: read-write
OBJECT-GROUP    

nteOsa5421CardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.46
A collection of objects used to manage the OSA5421 Card.
Status: current Access: read-write
OBJECT-GROUP    

nteGe114GCardGroup 1.3.6.1.4.1.2544.1.12.3.2.2.47
A collection of objects used to manage the GE114G Card.
Status: current Access: read-write
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor