CM-SAT-MIB

File: CM-SAT-MIB.mib (48373 bytes)

Imported modules

SNMPv2-CONF	SNMPv2-SMI	SNMPv2-TC
ADVA-MIB	CM-COMMON-MIB	CM-ENTITY-MIB
CM-SA-MIB	CM-FACILITY-MIB	IEEE8021-CFM-MIB

Imported symbols

MODULE-COMPLIANCE	OBJECT-GROUP	NOTIFICATION-GROUP
MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
Integer32	IpAddress	Unsigned32
Counter64	DateAndTime	DisplayString
TruthValue	RowStatus	StorageType
MacAddress	VariablePointer	TEXTUAL-CONVENTION
fsp150cm	VlanId	VlanPriority
CmPmBinAction	neIndex	shelfIndex
slotIndex	networkElementEntry	AdminState
OperationalState	SecondaryState	MepDestinationType
EsaProbePktIntervalType	PolicerColorMode	dot1agCfmMepEntry
Dot1agCfmMepIdOrZero

Defined Types

ServiceActivationTestMode
The test mode of Service Activation Test.
TEXTUAL-CONVENTION
	INTEGER	oneWay(1), twoWay(2)

SatProceduresType
All procedures type of the Service Activation Test.
TEXTUAL-CONVENTION
	INTEGER	none(1), configTestCir(2), configTestEir(3), configTestCbs(4), configTestEbs(5), configTestPolicing(6), performanceTest(7)

SatProceduresList
Bit Mask that specifies all the Service Activation Test procedure.
TEXTUAL-CONVENTION
	BITS	configTestCir(1), configTestEir(2), configTestCbs(3), configTestEbs(4), configTestPolicing(5), performance(6)

SatStatus
The status of the overall Service Activation Test.
TEXTUAL-CONVENTION
	INTEGER	completed(1), notStarted(2), inProgress(3), failed(4)

SatDirection
The direction of Service Activation Test.
TEXTUAL-CONVENTION
	INTEGER	forward(1), backward(2)

SatFramePayloadType
This object describes the Payload type of Service Activation Test frame.
TEXTUAL-CONVENTION
	INTEGER	prbs31(1), custom(2)

SatTestAction
This object describes the operation on Service Activation Test frame Payload type.
TEXTUAL-CONVENTION
	INTEGER	start(1), stop(2), notApplicable(3)

SatResult
This object describes the result of Service Activation Test.
TEXTUAL-CONVENTION
	INTEGER	none(1), pass(2), fail(3)

SatControlEntry
SEQUENCE
	satControlIndex	Integer32
	satControlName	DisplayString
	satControlTestMode	ServiceActivationTestMode
	satControlTestProcedures	SatProceduresList
	satControlConfigTestDuration	Integer32
	satControlConfigCIRTestStepNum	Integer32
	satControlConfigCIRTestStepDuration	Integer32
	satControlPerfTestDuration	Integer32
	satControlStatus	SatStatus
	satControlAction	SatTestAction
	satControlStorageType	StorageType
	satControlRowStatus	RowStatus
	satControlFailCause	DisplayString
	satControlTestStartTime	DateAndTime
	satControlFlpduTagOverride	TruthValue

SatStreamEntry
SEQUENCE
	satStreamIndex	Integer32
	satStreamName	DisplayString
	satStreamTestPort	VariablePointer
	satStreamTestDirection	SatDirection
	satStreamDestMacAddress	MacAddress
	satStreamFramePayloadType	SatFramePayloadType
	satStreamCustomFramePayload	DisplayString
	satStreamFrameSizeList	DisplayString
	satStreamSacProfileId	VariablePointer
	satStreamSrcMepId	VariablePointer
	satStreamDestMepType	MepDestinationType
	satStreamDestMepId	Integer32
	satStreamDestMepMacAddr	MacAddress
	satStreamDmmPacketSize	Integer32
	satStreamDmmPacketInterval	EsaProbePktIntervalType
	satStreamOverallResult	SatResult
	satStreamAction	SatTestAction
	satStreamStatus	SatStatus
	satStreamCurrentTestProcedure	SatProceduresType
	satStreamCurrentConfigCirTestStep	Integer32
	satStreamInner1VlanId	VlanId
	satStreamInner1VlanPri	VlanPriority
	satStreamInner1VlanEnabled	TruthValue
	satStreamInner1ValnEtherType	Integer32
	satStreamInner2VlanId	VlanId
	satStreamInner2VlanPri	VlanPriority
	satStreamInner2VlanEnabled	TruthValue
	satStreamInner2VlanEtherType	Integer32
	satStreamOuterVlanId	VlanId
	satStreamOuterVlanPri	VlanPriority
	satStreamOuterVlanEnabled	TruthValue
	satStreamOuterVlanEtherType	Integer32
	satStreamDeiEnabled	TruthValue
	satStreamGreenPcp	Integer32
	satStreamYellowPcp	Integer32
	satStreamColorMode	PolicerColorMode
	satStreamCirLo	Unsigned32
	satStreamCirHi	Unsigned32
	satStreamEirLo	Unsigned32
	satStreamEirHi	Unsigned32
	satStreamCbs	Unsigned32
	satStreamEbs	Unsigned32
	satStreamStorageType	StorageType
	satStreamRowStatus	RowStatus
	satStreamDmmPktPriority	VlanPriority
	satStreamMFactor	Unsigned32

SatResultStatsEntry
SEQUENCE
	satResultStatsTestType	SatProceduresType
	satResultStatsStepNumber	Integer32
	satResultStatsSessionId	Unsigned32
	satResultStatsStartTime	DateAndTime
	satResultStatsEndTime	DateAndTime
	satResultStatsStatus	SatStatus
	satResultStatsResult	SatResult
	satResultStatsMinIRGMeasured	Counter64
	satResultStatsAvgIRGMeasured	Counter64
	satResultStatsMaxIRGMeasured	Counter64
	satResultStatsMinIRYMeasured	Counter64
	satResultStatsAvgIRYMeasured	Counter64
	satResultStatsMaxIRYMeasured	Counter64
	satResultStatsFlrGMeasured	Integer32
	satResultStatsFlrYMeasured	Integer32
	satResultStatsFlrGCounts	Counter64
	satResultStatsFlrYCounts	Counter64
	satResultStatsMinFTDGMeasured	Unsigned32
	satResultStatsAvgFTDGMeasured	Unsigned32
	satResultStatsMaxFTDGMeasured	Unsigned32
	satResultStatsIMinFDVGMeasured	Unsigned32
	satResultStatsIAvgFDVGMeasured	Unsigned32
	satResultStatsIMaxFDVGMeasured	Unsigned32
	satResultStatsISyncErrorsNum	Unsigned32
	satResultStatsIfNegFLG	TruthValue
	satResultStatsIfNegFLY	TruthValue
	satResultStatsAvgIRT	Counter64
	satResultStatsFlrTMeasured	Integer32
	satResultStatsFlTCounts	Counter64
	satResultStatsIfNegFLT	TruthValue

SatSacProfileEntry
SEQUENCE
	satSacProfileIndex	Integer32
	satSacProfileAlias	DisplayString
	satSacProfileFLR	Integer32
	satSacProfileFTD	Unsigned32
	satSacProfileFDV	Unsigned32
	satSacProfileStorageType	StorageType
	satSacProfileRowStatus	RowStatus

SatResponderSessionEntry
SEQUENCE
	satResponderSessionIndex	Unsigned32
	satResponderSessionId	Unsigned32
	satResponderSessionControlMepMacAddr	MacAddress
	satResponderSessionMepId	VariablePointer
	satResponderSessionStorageType	StorageType
	satResponderSessionRowStatus	RowStatus

NetworkElementSatParamsEntry
SEQUENCE
	neSatParamsEtherType	Unsigned32

SatCfmMepExtEntry
SEQUENCE
	satCfmMepSatResponderEnabled	TruthValue

Defined Values

cmServiceActivationMIB		1.3.6.1.4.1.2544.1.12.28
This module defines the Service Activation MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
MODULE-IDENTITY

cmServActivationObjects		1.3.6.1.4.1.2544.1.12.28.1
OBJECT IDENTIFIER

cmServActivationNotifications		1.3.6.1.4.1.2544.1.12.28.2
OBJECT IDENTIFIER

cmServActivationConformance		1.3.6.1.4.1.2544.1.12.28.3
OBJECT IDENTIFIER

satControlTable		1.3.6.1.4.1.2544.1.12.28.1.1
A list of entries for the control of SAT Control.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SatControlEntry

satControlEntry		1.3.6.1.4.1.2544.1.12.28.1.1.1
A conceptual row in the satControlTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SatControlEntry

satControlIndex		1.3.6.1.4.1.2544.1.12.28.1.1.1.1
The index of the Service Activation Test.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

satControlName		1.3.6.1.4.1.2544.1.12.28.1.1.1.2
The alias of the Service Activation Test.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..16)

satControlTestMode		1.3.6.1.4.1.2544.1.12.28.1.1.1.3
The mode of the Service Activation Test.
Status: current	Access: read-write
OBJECT-TYPE
	ServiceActivationTestMode

satControlTestProcedures		1.3.6.1.4.1.2544.1.12.28.1.1.1.4
A List of Service Activation Test procedures.
Status: current	Access: read-write
OBJECT-TYPE
	SatProceduresList

satControlConfigTestDuration		1.3.6.1.4.1.2544.1.12.28.1.1.1.5
The duration of CIR step test, expressed in seconds.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

satControlConfigCIRTestStepNum		1.3.6.1.4.1.2544.1.12.28.1.1.1.6
The number of steps in CIR step test.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..10

satControlConfigCIRTestStepDuration		1.3.6.1.4.1.2544.1.12.28.1.1.1.7
The duration of each CIR step test.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..60

satControlPerfTestDuration		1.3.6.1.4.1.2544.1.12.28.1.1.1.8
The duration of the SAT Performance Test, expressed in minutes.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

satControlStatus		1.3.6.1.4.1.2544.1.12.28.1.1.1.9
The overall SAT Control Test Status.
Status: current	Access: read-only
OBJECT-TYPE
	SatStatus

satControlAction		1.3.6.1.4.1.2544.1.12.28.1.1.1.10
The start/stop action of the SAT Control.
Status: current	Access: read-write
OBJECT-TYPE
	SatTestAction

satControlStorageType		1.3.6.1.4.1.2544.1.12.28.1.1.1.11
The type of storage configured for this entry.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

satControlRowStatus		1.3.6.1.4.1.2544.1.12.28.1.1.1.12
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of satControlRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with satControlRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The satControlRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

satControlFailCause		1.3.6.1.4.1.2544.1.12.28.1.1.1.13
The information about the reason of the Test failure.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

satControlTestStartTime		1.3.6.1.4.1.2544.1.12.28.1.1.1.14
The start time of this SAT Control.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

satControlFlpduTagOverride		1.3.6.1.4.1.2544.1.12.28.1.1.1.15
Whether permit user to configure FLPDU explicitly. Disabled: FLPDUs tag is inherited from SCM of MEP. Enabled: User can configure FLPDUs tag explicitly, which will override the VLAN tags from MEP.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

satStreamTable		1.3.6.1.4.1.2544.1.12.28.1.2
A list of entries for the control of SAT Streams.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SatStreamEntry

satStreamEntry		1.3.6.1.4.1.2544.1.12.28.1.2.1
A conceptual row in the satStreamTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SatStreamEntry

satStreamIndex		1.3.6.1.4.1.2544.1.12.28.1.2.1.1
The index of the Service Activation Test Stream.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

satStreamName		1.3.6.1.4.1.2544.1.12.28.1.2.1.2
The alias of the Service Activation Test Stream.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..64)

satStreamTestPort		1.3.6.1.4.1.2544.1.12.28.1.2.1.3
The related port of the Service Activation Test Stream.
Status: current	Access: read-write
OBJECT-TYPE
	VariablePointer

satStreamTestDirection		1.3.6.1.4.1.2544.1.12.28.1.2.1.4
The direction of the Service Activation Test Stream.
Status: current	Access: read-write
OBJECT-TYPE
	SatDirection

satStreamDestMacAddress		1.3.6.1.4.1.2544.1.12.28.1.2.1.5
This object describes the destination MAC address of FLPDU.
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

satStreamFramePayloadType		1.3.6.1.4.1.2544.1.12.28.1.2.1.6
The type of Payload of the Frame Loss PDU.
Status: current	Access: read-write
OBJECT-TYPE
	SatFramePayloadType

satStreamCustomFramePayload		1.3.6.1.4.1.2544.1.12.28.1.2.1.7
This object describes the customized frame payload.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..16)

satStreamFrameSizeList		1.3.6.1.4.1.2544.1.12.28.1.2.1.8
This object describes a list of Frame Sizes used in FLPDU.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

satStreamSacProfileId		1.3.6.1.4.1.2544.1.12.28.1.2.1.9
This object describes the related Service Acceptance Criteria (SAC) Profile Id.
Status: current	Access: read-write
OBJECT-TYPE
	VariablePointer

satStreamSrcMepId		1.3.6.1.4.1.2544.1.12.28.1.2.1.10
This object describes the Local MEP related with SAT Test Stream.
Status: current	Access: read-write
OBJECT-TYPE
	VariablePointer

satStreamDestMepType		1.3.6.1.4.1.2544.1.12.28.1.2.1.11
This object describes the type of Destination MEP, which can be based on MEP id or MAC Address.
Status: current	Access: read-write
OBJECT-TYPE
	MepDestinationType

satStreamDestMepId		1.3.6.1.4.1.2544.1.12.28.1.2.1.12
This object describes the destination MEP id.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

satStreamDestMepMacAddr		1.3.6.1.4.1.2544.1.12.28.1.2.1.13
This object describes the Destination MEP's MAC Address.
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

satStreamDmmPacketSize		1.3.6.1.4.1.2544.1.12.28.1.2.1.14
This object describes the Delay Measurement Message (DMM) frame size.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

satStreamDmmPacketInterval		1.3.6.1.4.1.2544.1.12.28.1.2.1.15
This object describes the Delay Measurement Message (DMM) frame generation interval.
Status: current	Access: read-write
OBJECT-TYPE
	EsaProbePktIntervalType

satStreamOverallResult		1.3.6.1.4.1.2544.1.12.28.1.2.1.16
This object describes the test result.
Status: current	Access: read-only
OBJECT-TYPE
	SatResult

satStreamAction		1.3.6.1.4.1.2544.1.12.28.1.2.1.17
This object describes the operation on this test.
Status: current	Access: read-write
OBJECT-TYPE
	SatTestAction

satStreamStatus		1.3.6.1.4.1.2544.1.12.28.1.2.1.18
This object describes the test status of this Test Stream.
Status: current	Access: read-only
OBJECT-TYPE
	SatStatus

satStreamCurrentTestProcedure		1.3.6.1.4.1.2544.1.12.28.1.2.1.19
This object describes the current test procedure.
Status: current	Access: read-only
OBJECT-TYPE
	SatProceduresType

satStreamCurrentConfigCirTestStep		1.3.6.1.4.1.2544.1.12.28.1.2.1.20
This object describes the current step number of CIR Test.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

satStreamInner1VlanId		1.3.6.1.4.1.2544.1.12.28.1.2.1.21
This object describes the Inner1 VLAN Id.
Status: current	Access: read-write
OBJECT-TYPE
	VlanId

satStreamInner1VlanPri		1.3.6.1.4.1.2544.1.12.28.1.2.1.22
This object describes the Inner1 VLAN Priority.
Status: current	Access: read-write
OBJECT-TYPE
	VlanPriority

satStreamInner1VlanEnabled		1.3.6.1.4.1.2544.1.12.28.1.2.1.23
This object describes whether the Inner1 VLAN enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

satStreamInner1ValnEtherType		1.3.6.1.4.1.2544.1.12.28.1.2.1.24
This object describes the Inner2 VLAN EtherType.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

satStreamInner2VlanId		1.3.6.1.4.1.2544.1.12.28.1.2.1.25
This object describes the Inner2 VLAN Id.
Status: current	Access: read-write
OBJECT-TYPE
	VlanId

satStreamInner2VlanPri		1.3.6.1.4.1.2544.1.12.28.1.2.1.26
This object describes the Inner2 VLAN Priority.
Status: current	Access: read-write
OBJECT-TYPE
	VlanPriority

satStreamInner2VlanEnabled		1.3.6.1.4.1.2544.1.12.28.1.2.1.27
This object describes whether the Inner2 VLAN enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

satStreamInner2VlanEtherType		1.3.6.1.4.1.2544.1.12.28.1.2.1.28
This object describes whether the Inner2 VLAN ether type.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

satStreamOuterVlanId		1.3.6.1.4.1.2544.1.12.28.1.2.1.29
This object describes the Outer VLAN Id.
Status: current	Access: read-write
OBJECT-TYPE
	VlanId

satStreamOuterVlanPri		1.3.6.1.4.1.2544.1.12.28.1.2.1.30
This object describes the Outer VLAN Priority.
Status: current	Access: read-write
OBJECT-TYPE
	VlanPriority

satStreamOuterVlanEnabled		1.3.6.1.4.1.2544.1.12.28.1.2.1.31
This object describes whether the Outer VLAN enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

satStreamOuterVlanEtherType		1.3.6.1.4.1.2544.1.12.28.1.2.1.32
This object describes whether the Outer VLAN Ethertype.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

satStreamDeiEnabled		1.3.6.1.4.1.2544.1.12.28.1.2.1.33
This object describes whether the DEI enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

satStreamGreenPcp		1.3.6.1.4.1.2544.1.12.28.1.2.1.34
This object describes the PCP value for Green Packets.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

satStreamYellowPcp		1.3.6.1.4.1.2544.1.12.28.1.2.1.35
This object describes the PCP value for Yellow Packets.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

satStreamColorMode		1.3.6.1.4.1.2544.1.12.28.1.2.1.36
This object describes the color mode for Policing test.
Status: current	Access: read-write
OBJECT-TYPE
	PolicerColorMode

satStreamCirLo		1.3.6.1.4.1.2544.1.12.28.1.2.1.37
This object describes CIR low 32 bits.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

satStreamCirHi		1.3.6.1.4.1.2544.1.12.28.1.2.1.38
This object describes CIR high 32 bits.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

satStreamEirLo		1.3.6.1.4.1.2544.1.12.28.1.2.1.39
This object describes EIR low 32 bits.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

satStreamEirHi		1.3.6.1.4.1.2544.1.12.28.1.2.1.40
This object describes EIR high 32 bits.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

satStreamCbs		1.3.6.1.4.1.2544.1.12.28.1.2.1.41
This object describes CBS.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

satStreamEbs		1.3.6.1.4.1.2544.1.12.28.1.2.1.42
This object describes CBS.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

satStreamStorageType		1.3.6.1.4.1.2544.1.12.28.1.2.1.43
The type of storage configured for this entry.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

satStreamRowStatus		1.3.6.1.4.1.2544.1.12.28.1.2.1.44
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of satStreamRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with satStreamRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The satStreamRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

satStreamDmmPktPriority		1.3.6.1.4.1.2544.1.12.28.1.2.1.45
This object describes the Dmm packet priority.
Status: current	Access: read-write
OBJECT-TYPE
	VlanPriority

satStreamMFactor		1.3.6.1.4.1.2544.1.12.28.1.2.1.46
The M factor is used in test result validation. It is added to allow for the effect of the traffic policer's CBS and EBS settings and test time. Roughly, it equals to EBS/Test Duration, user should configure its value based on experience test.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

satResultStatsTable		1.3.6.1.4.1.2544.1.12.28.1.3
A list of entries for the control of SAT Result Statistics.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SatResultStatsEntry

satResultStatsEntry		1.3.6.1.4.1.2544.1.12.28.1.3.1
A conceptual row in the satResultStatsTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SatResultStatsEntry

satResultStatsTestType		1.3.6.1.4.1.2544.1.12.28.1.3.1.1
The Test Type of the Service Activation Test.
Status: current	Access: not-accessible
OBJECT-TYPE
	SatProceduresType

satResultStatsStepNumber		1.3.6.1.4.1.2544.1.12.28.1.3.1.2
The Test step number of the Service Activation Test.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

satResultStatsSessionId		1.3.6.1.4.1.2544.1.12.28.1.3.1.3
The session id of the Service Activation Test.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

satResultStatsStartTime		1.3.6.1.4.1.2544.1.12.28.1.3.1.4
The start time of the Service Activation Test.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

satResultStatsEndTime		1.3.6.1.4.1.2544.1.12.28.1.3.1.5
The end time of the Service Activation Test.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

satResultStatsStatus		1.3.6.1.4.1.2544.1.12.28.1.3.1.6
The Status of the Service Activation Test.
Status: current	Access: read-only
OBJECT-TYPE
	SatStatus

satResultStatsResult		1.3.6.1.4.1.2544.1.12.28.1.3.1.7
This object describes SAT whether pass.
Status: current	Access: read-only
OBJECT-TYPE
	SatResult

satResultStatsMinIRGMeasured		1.3.6.1.4.1.2544.1.12.28.1.3.1.8
This object describes the minimum Information Rate (IR) for Green Packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

satResultStatsAvgIRGMeasured		1.3.6.1.4.1.2544.1.12.28.1.3.1.9
This object describes the average Information Rate (IR) for Green Packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

satResultStatsMaxIRGMeasured		1.3.6.1.4.1.2544.1.12.28.1.3.1.10
This object describes the maximum Information Rate (IR) for Green Packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

satResultStatsMinIRYMeasured		1.3.6.1.4.1.2544.1.12.28.1.3.1.11
This object describes the minimum Information Rate (IR) for Yellow Packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

satResultStatsAvgIRYMeasured		1.3.6.1.4.1.2544.1.12.28.1.3.1.12
This object describes the average Information Rate (IR) for Yellow Packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

satResultStatsMaxIRYMeasured		1.3.6.1.4.1.2544.1.12.28.1.3.1.13
This object describes the maximum Information Rate (IR) for Yellow Packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

satResultStatsFlrGMeasured		1.3.6.1.4.1.2544.1.12.28.1.3.1.14
This object describes the Frame Loss Ratio (FLR) for Green Packets. From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost. For the earlier release, If its value is 260001, it means 26.0001% frame lost.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

satResultStatsFlrYMeasured		1.3.6.1.4.1.2544.1.12.28.1.3.1.15
This object describes the Frame Loss Ratio (FLR) for Yellow Packets. From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost. For the earlier release, If its value is 260001, it means 26.0001% frame lost.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

satResultStatsFlrGCounts		1.3.6.1.4.1.2544.1.12.28.1.3.1.16
This object describes the Frame Loss (FL) count for Green Packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

satResultStatsFlrYCounts		1.3.6.1.4.1.2544.1.12.28.1.3.1.17
This object describes the Frame Loss (FL) count for Yellow Packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

satResultStatsMinFTDGMeasured		1.3.6.1.4.1.2544.1.12.28.1.3.1.18
This object describes the minimum Frame Transfer Delay (FTD) for Green Packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

satResultStatsAvgFTDGMeasured		1.3.6.1.4.1.2544.1.12.28.1.3.1.19
This object describes the average Frame Transfer Delay (FTD) for Green Packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

satResultStatsMaxFTDGMeasured		1.3.6.1.4.1.2544.1.12.28.1.3.1.20
This object describes the maximum Frame Transfer Delay (FTD) for Green Packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

satResultStatsIMinFDVGMeasured		1.3.6.1.4.1.2544.1.12.28.1.3.1.21
This object describes the minimum Frame Delay Variation (FDV) for Green Packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

satResultStatsIAvgFDVGMeasured		1.3.6.1.4.1.2544.1.12.28.1.3.1.22
This object describes the average Frame Delay Variation (FDV) for Green Packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

satResultStatsIMaxFDVGMeasured		1.3.6.1.4.1.2544.1.12.28.1.3.1.23
This object describes the maximum Frame Delay Variation (FDV) for Green Packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

satResultStatsISyncErrorsNum		1.3.6.1.4.1.2544.1.12.28.1.3.1.24
The number of (time) Synchronization Errors between SAT Control and SAT Responder in the current Test.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

satResultStatsIfNegFLG		1.3.6.1.4.1.2544.1.12.28.1.3.1.25
This object means whether negative green frame loss. True: negative loss of green packets occurs, which means receiving more green packets than expected. False: negative loss of green packets doesn't occur, which means not receiving more green packets than expected.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

satResultStatsIfNegFLY		1.3.6.1.4.1.2544.1.12.28.1.3.1.26
This object means whether negative yellow frame loss. True: negative loss of yellow packets occurs, which means receiving more yellow packets than expected. False: negative loss of yellow packets doesn't occur, which means not receiving more yellow packets than expected.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

satResultStatsAvgIRT		1.3.6.1.4.1.2544.1.12.28.1.3.1.27
This object describes Average IR of total packets, non distinguishing green or yellow. Only valid for color blind test.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

satResultStatsFlrTMeasured		1.3.6.1.4.1.2544.1.12.28.1.3.1.28
This object describes the Frame Loss Ratio (FLR) for Total Packets. No distinguish color, negative value means receiving much more packets than expected. Only valid for color blind test. If its value is 26000001, it means 26.000001% frame lost.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

satResultStatsFlTCounts		1.3.6.1.4.1.2544.1.12.28.1.3.1.29
This object describes the Frame Loss (FL) count for Total Packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

satResultStatsIfNegFLT		1.3.6.1.4.1.2544.1.12.28.1.3.1.30
This object means whether negative total frame loss. True: negative loss of green packets occurs, which means receiving more green packets than expected. False: negative loss of green packets doesn't occur, which means not receiving more green packets than expected.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

satSacProfileTable		1.3.6.1.4.1.2544.1.12.28.1.4
A list of entries for the control of SAT Service Acceptance Criteria (SAC) Profile.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SatSacProfileEntry

satSacProfileEntry		1.3.6.1.4.1.2544.1.12.28.1.4.1
A conceptual row in the satSacProfileTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SatSacProfileEntry

satSacProfileIndex		1.3.6.1.4.1.2544.1.12.28.1.4.1.1
The index of SAT Service Acceptance Criteria (SAC) Profile.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

satSacProfileAlias		1.3.6.1.4.1.2544.1.12.28.1.4.1.2
The alias of SAT Service Acceptance Criteria (SAC) Profile.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..64)

satSacProfileFLR		1.3.6.1.4.1.2544.1.12.28.1.4.1.3
The Frame Loss Ratio (FLR) acceptance criteria of this SAC Profile. From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost. For the earlier release, If its value is 260001, it means 26.0001% frame lost.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

satSacProfileFTD		1.3.6.1.4.1.2544.1.12.28.1.4.1.4
The Frame Transfer Delay (FTD) acceptance criteria of this SAC Profile.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

satSacProfileFDV		1.3.6.1.4.1.2544.1.12.28.1.4.1.5
The frame transfer delay variation of SAT Service Acceptance Criteria (SAC) Profile.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

satSacProfileStorageType		1.3.6.1.4.1.2544.1.12.28.1.4.1.6
The type of storage configured for this entry.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

satSacProfileRowStatus		1.3.6.1.4.1.2544.1.12.28.1.4.1.7
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of satSacProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with satSacProfileRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The satSacProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

satResponderSessionTable		1.3.6.1.4.1.2544.1.12.28.1.5
A list of entries for the control of SAT Responder Session.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SatResponderSessionEntry

satResponderSessionEntry		1.3.6.1.4.1.2544.1.12.28.1.5.1
A conceptual row in the satResponderSessionTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SatResponderSessionEntry

satResponderSessionIndex		1.3.6.1.4.1.2544.1.12.28.1.5.1.1
The index of the entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

satResponderSessionId		1.3.6.1.4.1.2544.1.12.28.1.5.1.2
The id of active test session negotiated between SAT Responder and SAT Control.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

satResponderSessionControlMepMacAddr		1.3.6.1.4.1.2544.1.12.28.1.5.1.3
This object describes the Control MEP's MAC Address.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

satResponderSessionMepId		1.3.6.1.4.1.2544.1.12.28.1.5.1.4
The local MEP Id.
Status: current	Access: read-only
OBJECT-TYPE
	VariablePointer

satResponderSessionStorageType		1.3.6.1.4.1.2544.1.12.28.1.5.1.5
The type of storage configured for this entry.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

satResponderSessionRowStatus		1.3.6.1.4.1.2544.1.12.28.1.5.1.6
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of satResponderSessionRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with satResponderSessionRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The satResponderSessionRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

networkElementSatParamsTable		1.3.6.1.4.1.2544.1.12.28.1.6
Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NetworkElementSatParamsEntry

networkElementSatParamsEntry		1.3.6.1.4.1.2544.1.12.28.1.6.1
A conceptual row in the networkElementSatParamsTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	NetworkElementSatParamsEntry

neSatParamsEtherType		1.3.6.1.4.1.2544.1.12.28.1.6.1.1
This object describes the SAT System EtherType.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

satCfmMepExtTable		1.3.6.1.4.1.2544.1.12.28.1.7
This objects describe the SAT responder whether enabled on the MEP.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SatCfmMepExtEntry

satCfmMepExtEntry		1.3.6.1.4.1.2544.1.12.28.1.7.1
A conceptual row in the satCfmMepExtTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SatCfmMepExtEntry

satCfmMepSatResponderEnabled		1.3.6.1.4.1.2544.1.12.28.1.7.1.1
This objects describes the SAT Responder whether enabled on the MEP.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

cmServActivationCompliances		1.3.6.1.4.1.2544.1.12.28.3.1
OBJECT IDENTIFIER

cmServActivationGroups		1.3.6.1.4.1.2544.1.12.28.3.2
OBJECT IDENTIFIER

cmServActivationCompliance		1.3.6.1.4.1.2544.1.12.28.3.1.1
Describes the requirements for conformance to the CM SAT group.
Status: current	Access: read-write
MODULE-COMPLIANCE

cmSatGroup		1.3.6.1.4.1.2544.1.12.28.3.2.1
A collection of objects used to manage the CM SAT functionality.
Status: current	Access: read-write
OBJECT-GROUP