COLUBRIS-PUBLIC-ACCESS-RETENTION-MIB

File: COLUBRIS-PUBLIC-ACCESS-RETENTION-MIB.mib (15967 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
COLUBRIS-SMI COLUBRIS-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
IpAddress Integer32 Unsigned32
Counter32 Counter64 DateAndTime
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
colubrisMgmtV2 ColubrisSSIDOrNone

Defined Types

PublicAccessRetentionSessionEntry  
SEQUENCE    
  publicAccessRetentionSessionIndex Integer32
  publicAccessRetentionSessionState INTEGER
  publicAccessRetentionSessionUserName OCTET STRING
  publicAccessRetentionSessionStartTime DateAndTime
  publicAccessRetentionSessionDuration Counter32
  publicAccessRetentionSessionStationIpAddress IpAddress
  publicAccessRetentionSessionPacketsSent Counter32
  publicAccessRetentionSessionPacketsReceived Counter32
  publicAccessRetentionSessionBytesSent Counter64
  publicAccessRetentionSessionBytesReceived Counter64
  publicAccessRetentionSessionSSID ColubrisSSIDOrNone

PublicAccessRetentionPeriodEntry  
SEQUENCE    
  publicAccessRetentionPeriodIndex Integer32
  publicAccessRetentionPeriodStartTime DateAndTime
  publicAccessRetentionPeriodStopTime DateAndTime
  publicAccessRetentionPeriodHighestSessionCount Counter32
  publicAccessRetentionPeriodTotalSessionCount Counter32

Defined Values

colubrisPublicAccessRetentionMIB 1.3.6.1.4.1.8744.5.15
Colubris Networks Public Access MIB.
MODULE-IDENTITY    

colubrisPublicAccessRetentionMIBObjects 1.3.6.1.4.1.8744.5.15.1
OBJECT IDENTIFIER    

publicAccessRetentionSessionsGroup 1.3.6.1.4.1.8744.5.15.1.1
OBJECT IDENTIFIER    

publicAccessRetentionPeriodicStatsGroup 1.3.6.1.4.1.8744.5.15.1.2
OBJECT IDENTIFIER    

publicAccessRetentionSessionsMaxCount 1.3.6.1.4.1.8744.5.15.1.1.1
The maximum number of entries inside the publicAccessRetentionSessionTable. The maximum value for this is 250% the maximum number of users configured inside the product.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

publicAccessRetentionSessionsMaxTime 1.3.6.1.4.1.8744.5.15.1.1.2
The maximum number of seconds for an entry to remain in the table. When expired the session's state changes to Unassigned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 300..1200  

publicAccessRetentionSessionTable 1.3.6.1.4.1.8744.5.15.1.1.3
A table containing information about existing or past authenticated user sessions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PublicAccessRetentionSessionEntry

publicAccessRetentionSessionEntry 1.3.6.1.4.1.8744.5.15.1.1.3.1
Information about a particular authenticated user session. publicAccessRetentionSessionIndex - Uniquely identifies a session in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  PublicAccessRetentionSessionEntry  

publicAccessRetentionSessionIndex 1.3.6.1.4.1.8744.5.15.1.1.3.1.1
Index of a session in the publicAccessRetentionSessionTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

publicAccessRetentionSessionState 1.3.6.1.4.1.8744.5.15.1.1.3.1.2
Indicates the current state of the user's session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unassigned(0), connected(2), reconnecting(3), disconnecting(4), disconnected(5), disconnectingAdministrative(6), disconnectedAdministrative(7)  

publicAccessRetentionSessionUserName 1.3.6.1.4.1.8744.5.15.1.1.3.1.3
Indicates the last username used for RADIUS authentication.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..253)  

publicAccessRetentionSessionStartTime 1.3.6.1.4.1.8744.5.15.1.1.3.1.4
Indicates when this user session was started.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

publicAccessRetentionSessionDuration 1.3.6.1.4.1.8744.5.15.1.1.3.1.5
Indicates how long the user's session has been active. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

publicAccessRetentionSessionStationIpAddress 1.3.6.1.4.1.8744.5.15.1.1.3.1.6
Indicates the user's IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

publicAccessRetentionSessionPacketsSent 1.3.6.1.4.1.8744.5.15.1.1.3.1.7
Indicates the total number of IP packets sent by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

publicAccessRetentionSessionPacketsReceived 1.3.6.1.4.1.8744.5.15.1.1.3.1.8
Indicates the total number of IP packets received by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

publicAccessRetentionSessionBytesSent 1.3.6.1.4.1.8744.5.15.1.1.3.1.9
Indicates the total number of bytes sent by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

publicAccessRetentionSessionBytesReceived 1.3.6.1.4.1.8744.5.15.1.1.3.1.10
Indicates the total number of bytes received by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

publicAccessRetentionSessionSSID 1.3.6.1.4.1.8744.5.15.1.1.3.1.11
Indicates the user's Access Point SSID (ONLY when Location-aware is enabled and properly configured). If this information is not available, a zero-length string will be returned.
Status: current Access: read-only
OBJECT-TYPE    
  ColubrisSSIDOrNone  

publicAccessRetentionPeriodicStatsMaxCount 1.3.6.1.4.1.8744.5.15.1.2.1
Specifies the maximum number of periods to keep inside the table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3  

publicAccessRetentionPeriodicStatsDuration 1.3.6.1.4.1.8744.5.15.1.2.2
Specifies the amount of time for a period of an entry inside the table. Changing the value will erase the table contents.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 300..1200  

publicAccessRetentionPeriodTable 1.3.6.1.4.1.8744.5.15.1.2.3
A table containing statistics on the number of authentication user's sessions pending and terminated.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PublicAccessRetentionPeriodEntry

publicAccessRetentionPeriodEntry 1.3.6.1.4.1.8744.5.15.1.2.3.1
Statistics information about the number of authenticated user sessions in a given period of time.
Status: current Access: not-accessible
OBJECT-TYPE    
  PublicAccessRetentionPeriodEntry  

publicAccessRetentionPeriodIndex 1.3.6.1.4.1.8744.5.15.1.2.3.1.1
Index of a statistics period.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..9999  

publicAccessRetentionPeriodStartTime 1.3.6.1.4.1.8744.5.15.1.2.3.1.2
Indicates the start time for the statistical period. If zero, then the period does not contain valid information.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

publicAccessRetentionPeriodStopTime 1.3.6.1.4.1.8744.5.15.1.2.3.1.3
Indicates the stop time for the statistical period. If zero, the period is not yet terminated.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

publicAccessRetentionPeriodHighestSessionCount 1.3.6.1.4.1.8744.5.15.1.2.3.1.4
Indicates the highest number of simultaneous authenticated user sessions within this time period.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

publicAccessRetentionPeriodTotalSessionCount 1.3.6.1.4.1.8744.5.15.1.2.3.1.5
Indicates the total number of authenticated user sessions within this time period.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

publicAccessRetentionMIBNotificationPrefix 1.3.6.1.4.1.8744.5.15.2
OBJECT IDENTIFIER    

publicAccessRetentionMIBNotifications 1.3.6.1.4.1.8744.5.15.2.0
OBJECT IDENTIFIER    

publicAccessRetentionSessionMaxCountReachedTrap 1.3.6.1.4.1.8744.5.15.2.0.1
This notification is sent whenever the number of session exceed the value of publicAccessRetentionSessionsMaxCount.
Status: current Access: read-only
NOTIFICATION-TYPE    

colubrisPublicAccessRetentionMIBConformance 1.3.6.1.4.1.8744.5.15.3
OBJECT IDENTIFIER    

colubrisPublicAccessRetentionMIBCompliances 1.3.6.1.4.1.8744.5.15.3.1
OBJECT IDENTIFIER    

colubrisPublicAccessRetentionMIBGroups 1.3.6.1.4.1.8744.5.15.3.2
OBJECT IDENTIFIER    

colubrisPublicAccessRetentionMIBCompliance 1.3.6.1.4.1.8744.5.15.3.1.1
The compliance statement for entities which implement the Colubris Public Access Retention MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

colubrisPublicAccessRetentionSessionsMIBGroup 1.3.6.1.4.1.8744.5.15.3.2.1
A collection of objects providing the Public Access Retention Sessions MIB capability.
Status: current Access: read-only
OBJECT-GROUP    

colubrisPublicAccessRetentionPeriodicStatsMIBGroup 1.3.6.1.4.1.8744.5.15.3.2.2
A collection of objects providing the Public Access Retention PeriodicStats MIB capability.
Status: current Access: read-only
OBJECT-GROUP    

colubrisPublicAccessRetentionNotificationGroup 1.3.6.1.4.1.8744.5.15.3.2.3
A collection of supported notifications.
Status: current Access: read-only
NOTIFICATION-GROUP