COM21-HCXVLAN-MIB

File: COM21-HCXVLAN-MIB.mib (50778 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	COM21-HCX-MIB
COM21-HCXALM-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
Integer32	IpAddress	Gauge32
TimeTicks	DisplayString	MacAddress
com21	com21Hcx	hcxAlmSeverity
hcxEventLogTime

Defined Types

PrimServiceState
INTEGER	is(1), oos(2)

Com21RowStatus
INTEGER	active(1), create(2), destroy(3), deactive(4)

HcxVlanCtrlEntry
SEQUENCE
	hcxVlanCtrlId	INTEGER
	hcxVlanCtrlName	DisplayString
	hcxVlanShelf	INTEGER
	hcxVlanSlot	INTEGER
	hcxVlanCardType	INTEGER
	hcxVlanPort	INTEGER
	hcxVlanVpi	INTEGER
	hcxVlanVci	INTEGER
	hcxVlanRate	Integer32
	hcxVlanPriStatus	Com21RowStatus
	hcxVlanSecStatus	INTEGER
	hcxVlanType	INTEGER
	hcxVlanPeerToPeerFlag	INTEGER
	hcxVlanMcastDnstrmRate	INTEGER
	hcxVlanIpArpFiltEnbl	INTEGER
	hcxVlanIpSrcFiltEnbl	INTEGER
	hcxVlanIpDstFiltEnbl	INTEGER
	hcxVlanIpBootpReqFiltEnbl	INTEGER
	hcxVlanIpBootpReplyFiltEnbl	INTEGER
	hcxVlanIpDhcpSnoopFiltEnbl	INTEGER
	hcxVlanL2SnapFiltEnbl	INTEGER
	hcxVlanL2NonSnapFiltEnbl	INTEGER
	hcxVlanL2EnetFiltEnbl	INTEGER
	hcxVlanL2ArpIpv4FiltEnbl	INTEGER
	hcxVlanL2Ipv4FiltEnbl	INTEGER
	hcxVlanL2Ipv6FiltEnbl	INTEGER
	hcxVlanL2IpxFiltEnbl	INTEGER
	hcxVlanL2AppletalkFiltEnbl	INTEGER
	hcxVlanL2OthersFiltEnbl	INTEGER
	hcxVlanIpNetbiosFiltEnbl	INTEGER
	hcxVPNNum	Integer32

HcxVlanStatsEntry
SEQUENCE
	hcxVlanStatsId	INTEGER
	hcxVlanCurrMcastTxPkts	Gauge32
	hcxVlanCurrMcastDroppedPkts	Gauge32
	hcxVlanIpCurrArpFiltStat	Gauge32
	hcxVlanIpCurrSrcFiltStat	Gauge32
	hcxVlanIpCurrDstFiltStat	Gauge32
	hcxVlanIpCurrBootpReqFiltStat	Gauge32
	hcxVlanIpCurrBootpReplyFiltStat	Gauge32
	hcxVlanIpCurrDhcpSnoopFiltStat	Gauge32
	hcxVlanL2CurrSnapFiltStat	Gauge32
	hcxVlanL2CurrNonSnapFiltStat	Gauge32
	hcxVlanL2CurrEnetFiltStat	Gauge32
	hcxVlanL2CurrArpIpv4FiltStat	Gauge32
	hcxVlanL2CurrIpv4FiltStat	Gauge32
	hcxVlanL2CurrIpv6FiltStat	Gauge32
	hcxVlanL2CurrIpxFiltStat	Gauge32
	hcxVlanL2CurrAppletalkFiltStat	Gauge32
	hcxVlanL2CurrOthersFiltStat	Gauge32
	hcxVlanIpCurrNetbiosFiltStat	Gauge32
	hcxVlanPrevMcastTxPkts	Gauge32
	hcxVlanPrevMcastDroppedPkts	Gauge32
	hcxVlanIpPrevArpFiltStat	Gauge32
	hcxVlanIpPrevSrcFiltStat	Gauge32
	hcxVlanIpPrevDstFiltStat	Gauge32
	hcxVlanIpPrevBootpReqFiltStat	Gauge32
	hcxVlanIpPrevBootpReplyFiltStat	Gauge32
	hcxVlanIpPrevDhcpSnoopFiltStat	Gauge32
	hcxVlanL2PrevSnapFiltStat	Gauge32
	hcxVlanL2PrevNonSnapFiltStat	Gauge32
	hcxVlanL2PrevEnetFiltStat	Gauge32
	hcxVlanL2PrevArpIpv4FiltStat	Gauge32
	hcxVlanL2PrevIpv4FiltStat	Gauge32
	hcxVlanL2PrevIpv6FiltStat	Gauge32
	hcxVlanL2PrevIpxFiltStat	Gauge32
	hcxVlanL2PrevAppletalkFiltStat	Gauge32
	hcxVlanL2PrevOthersFiltStat	Gauge32
	hcxVlanIpPrevNetbiosFiltStat	Gauge32
	hcxVlanClearStats	INTEGER

HcxOc3VlanStatsEntry
SEQUENCE
	hcxOc3VlanStatsVlanId	INTEGER
	hcxOc3VlanStatsCurrTxPkts	Integer32
	hcxOc3VlanStatsCurrRxPkts	Integer32
	hcxOc3VlanStatsCurrCrcPkts	Integer32
	hcxOc3VlanStatsPrevTxPkts	Integer32
	hcxOc3VlanStatsPrevRxPkts	Integer32
	hcxOc3VlanStatsPrevCrcPkts	Integer32
	hcxOc3VlanStatsClear	INTEGER

Defined Values

com21HcxVlan		1.3.6.1.4.1.1141.2.80
This is the Com21 ComController Vlan MIB module. COM21 Part# 005-0025-00
MODULE-IDENTITY

com21HcxVlanCtrlGroup		1.3.6.1.4.1.1141.2.81
OBJECT IDENTIFIER

com21HcxVlanStatsGroup		1.3.6.1.4.1.1141.2.82
OBJECT IDENTIFIER

com21HcxOc3VlanStatsGroup		1.3.6.1.4.1.1141.2.83
OBJECT IDENTIFIER

com21HcxVlanCtrlTable		1.3.6.1.4.1.1141.2.81.1
.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HcxVlanCtrlEntry

com21HcxVlanCtrlEntry		1.3.6.1.4.1.1141.2.81.1.1
.
Status: current	Access: not-accessible
OBJECT-TYPE
	HcxVlanCtrlEntry

hcxVlanCtrlId		1.3.6.1.4.1.1141.2.81.1.1.1
Specifies the associated Vlan Id.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..64

hcxVlanCtrlName		1.3.6.1.4.1.1141.2.81.1.1.2
contains a descriptive name for the VLAN.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(32)

hcxVlanShelf		1.3.6.1.4.1.1141.2.81.1.1.3
Specifies the Shelf to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached to
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1

hcxVlanSlot		1.3.6.1.4.1.1141.2.81.1.1.4
Specifies the Slot to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached to
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hcxVlanCardType		1.3.6.1.4.1.1141.2.81.1.1.5
Specifies the CardType to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached to
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	tenBaseT(1), onehundredBaseT(2), oc3(3)

hcxVlanPort		1.3.6.1.4.1.1141.2.81.1.1.6
Specifies the Port to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached to
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hcxVlanPriStatus		1.3.6.1.4.1.1141.2.81.1.1.7
lets the user Create a Vlan instance. If already created it lets the user Enable, Disable or Delete the Vlan. Note that the VLAN cannot be Enabled or Disabled until the attributes hcxVlanShelf, hcxVlanSlot, hcxVlanCardType and hcxVlanPort have valid values.
Status: current	Access: read-create
OBJECT-TYPE
	Com21RowStatus

hcxVlanSecStatus		1.3.6.1.4.1.1141.2.81.1.1.8
Indicates whether the Vlan is ONLINE or OFFLINE.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	online(1), offline(2)

hcxVlanType		1.3.6.1.4.1.1141.2.81.1.1.9
Specifies whether the Vlan is an internal Vlan or external Vlan. internal Vlan does not allow traffic to leave the Vlan or enter the Vlan. external Vlan allows traffic in both directions. default is external. Note that this attribute is not applicable to 10bT card.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	internal(1), external(2)

hcxVlanPeerToPeerFlag		1.3.6.1.4.1.1141.2.81.1.1.10
Specifies whether STU to STU communication is allowed in the Vlan. If false, STU to STU communication is not allowed and has to go through an external router. If true direct STU to STU communication is allowed without the intervention of an external router. This attribute is not applicable to VLANs on 10bT Card and defaults to a read-only value of true. Default for 100bT/OC3 is false.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanMcastDnstrmRate		1.3.6.1.4.1.1141.2.81.1.1.11
Specifies the downstream multicast rate associated with this Vlan. Defined in bits per second. The multicast rate is ondemand (not guaranteed if enough bandwidth is not available). 0 stops all broadcast forwarding. Default 100000. If a twoWay modem of model CP1000, CP1000A, CP1000B or CP1000C is acquired in the system or a teleRet modem is configured then the multicast rate will be dynamically lowered to not exceed 1000000. Under that condition an attempt to set the rate to greater than 1000000 will be rejected. The rate wil remain at 1000000 even if the condition clears eventually (all the modems of model CP1000, CP1000A, CP1000B or CP1000C get deacquired and no more teleRet modems are configured).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..10000000

hcxVlanIpArpFiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.12
Specifies whether ARP authentication filtering should be enabled on this VLAN. This filter is applicable to 10BT, 100BT, and OC3 cards. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpArpFiltEnable.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanIpSrcFiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.13
Specifies whether IP source address filtering should be enabled on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpSrcFiltEnable.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanIpDstFiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.14
Specifies whether IP destination address filtering should be enabled on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to to 10BT card. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpDstFiltEnable.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanIpBootpReqFiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.15
Specifies whether BOOTP requests, or DHCPDISCOVER, or DHCPREQUEST, or DHCPRELEASE packets should be filtered on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It filters traffic in the downstream direction. Default is true. This filter cannot be controlled per ComPort.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanIpBootpReplyFiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.16
Specifies whether BOOTP replies, or DHCPOFFER, or DHCPACK packets should be filtered on this VLAN. This filter is applicable to 100BT, and OC3 cards. It it not applicable to 10BT card. It filters traffic in the upstream direction. Default is true. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpBootpReplyFiltEnbl.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanIpDhcpSnoopFiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.17
Specifies whether DHCP snooping should be enabled on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It snoops traffic in the downstream direction for DHCPACK packets, and in the upstream direction for DHCPDECLINE or DHCPRELEASE packets. Dynamic IP address assigments thus learned are stored in the valid source IP address table (com21HcxStuSrcIpAddrGroup.) Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpDhcpSnoopFiltEnbl.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanL2SnapFiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.18
Specifies whether SNAP-encoded IEEE 802.3 packets should be filtered on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2SnapFiltEnbl.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanL2NonSnapFiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.19
Specifies whether non-SNAP-encoded IEEE 802.3 packets should be filtered on this VLAN. This filter is applicable to 10BT, 100BT, and OC3 cards. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2NonSnapFiltEnbl.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanL2EnetFiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.20
Specifies whether Ethernet packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT Card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2EnetFiltEnbl.
Status: deprecated	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanL2ArpIpv4FiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.21
Specifies whether ARP packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2ArpIpv4FiltEnbl.
Status: deprecated	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanL2Ipv4FiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.22
Specifies whether IPv4 packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2Ipv4FiltEnbl.
Status: deprecated	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanL2Ipv6FiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.23
Specifies whether IPv6 packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2Ipv6FiltEnbl.
Status: deprecated	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanL2IpxFiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.24
Specifies whether IPX packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2IpxFiltEnbl.
Status: deprecated	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanL2AppletalkFiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.25
Specifies whether AppleTalk packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2AppletalkFiltEnbl.
Status: deprecated	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanL2OthersFiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.26
Specifies whether all layer 2 packets that are none of the above (ARP, IPv4, IPv6, IPX, AppleTalk) should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2OthersFiltEnbl.
Status: deprecated	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVlanIpNetbiosFiltEnbl		1.3.6.1.4.1.1141.2.81.1.1.27
Specifies whether NetBIOS-over-IP packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpNetbiosFiltEnbl.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

hcxVPNNum		1.3.6.1.4.1.1141.2.81.1.1.28
Specifies the Virtual Private Network to which this Vlan belongs to. If this is not set, it defaults to 0. If a ComPort which belongs to this Vlan has to be configured to support Voice, then a VPN Number has to be defined. Default is 0.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hcxVlanVpi		1.3.6.1.4.1.1141.2.81.1.1.29
Specifies the VPI to use if this vlan is on an OC3 Port. This attribute is not used if vlan is not on a oc3 Port. Default is 0.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..64

hcxVlanVci		1.3.6.1.4.1.1141.2.81.1.1.30
Specifies the VCI to use if this vlan is on an OC3 Port. This attribute is not used if vlan is not on a oc3 Port. If the hcxVlanVpi value is set to 0, the valid range for this attribute is 38 to 255 Default is 0.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..255

hcxVlanRate		1.3.6.1.4.1.1141.2.81.1.1.31
Specifies the Maximum Rate at which this Vlan can operate. This attribute is used only if the vlan is on an OC3 Port. Default is 10,000,000 bps
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

com21HcxVlanStatsTable		1.3.6.1.4.1.1141.2.82.1
.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HcxVlanStatsEntry

com21HcxVlanStatsEntry		1.3.6.1.4.1.1141.2.82.1.1
.
Status: current	Access: not-accessible
OBJECT-TYPE
	HcxVlanStatsEntry

hcxVlanStatsId		1.3.6.1.4.1.1141.2.82.1.1.1
Is used as an Index to read the Statistics of a given Vlan.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..64

hcxVlanCurrMcastTxPkts		1.3.6.1.4.1.1141.2.82.1.1.2
contains the number of Multicast net packets sent downstream over the Vlan in the current 15min period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanCurrMcastDroppedPkts		1.3.6.1.4.1.1141.2.82.1.1.3
contains the number of Multicast downstream packets dropped in the current 15min period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanIpCurrArpFiltStat		1.3.6.1.4.1.1141.2.82.1.1.4
contains the number of ARP packets from this Vlan dropped due to authentication filtering in the current 15minute collection period
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanIpCurrSrcFiltStat		1.3.6.1.4.1.1141.2.82.1.1.5
Contains the number of IP packets from this VLAN dropped due to source address filtering in the current 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanIpCurrDstFiltStat		1.3.6.1.4.1.1141.2.82.1.1.6
Contains the number of IP packets from this VLAN dropped due to destination address filtering in the current 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanIpCurrBootpReqFiltStat		1.3.6.1.4.1.1141.2.82.1.1.7
Contains the number of Bootp Req packets from this VLAN dropped due to filtering in the current 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanIpCurrBootpReplyFiltStat		1.3.6.1.4.1.1141.2.82.1.1.8
Contains the number of Bootp Reply packets from this VLAN dropped due to filtering in the current 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanIpCurrDhcpSnoopFiltStat		1.3.6.1.4.1.1141.2.82.1.1.9
Contains the number of DHCP Ack packets from this VLAN snooped due to filtering in the current 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanPrevMcastTxPkts		1.3.6.1.4.1.1141.2.82.1.1.10
contains the number of Multicast net packets sent downstream over the Vlan in the previous 15min period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanPrevMcastDroppedPkts		1.3.6.1.4.1.1141.2.82.1.1.11
contains the number of Multicast downstream packets dropped in the previous 15min period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanIpPrevArpFiltStat		1.3.6.1.4.1.1141.2.82.1.1.12
contains the number of ARP packets from this Vlan dropped due to authentication filtering in the previous 15minute collection period
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanIpPrevSrcFiltStat		1.3.6.1.4.1.1141.2.82.1.1.13
Contains the number of IP packets from this VLAN dropped due to source address filtering in the previous 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanIpPrevDstFiltStat		1.3.6.1.4.1.1141.2.82.1.1.14
Contains the number of IP packets from this VLAN dropped due to destination address filtering in the previous 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanIpPrevBootpReqFiltStat		1.3.6.1.4.1.1141.2.82.1.1.15
Contains the number of Bootp Req packets from this VLAN dropped due to filtering in the previous 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanIpPrevBootpReplyFiltStat		1.3.6.1.4.1.1141.2.82.1.1.16
Contains the number of Bootp Reply packets from this VLAN dropped due to filtering in the previous 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanIpPrevDhcpSnoopFiltStat		1.3.6.1.4.1.1141.2.82.1.1.17
Contains the number of DHCP Ack packets from this VLAN snooped due to filtering in the previous 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanClearStats		1.3.6.1.4.1.1141.2.82.1.1.18
This attribute is used to clear the all VLAN statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	nil(1), clear(2)

hcxVlanL2CurrSnapFiltStat		1.3.6.1.4.1.1141.2.82.1.1.19
Contains the number of SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the current 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2CurrNonSnapFiltStat		1.3.6.1.4.1.1141.2.82.1.1.20
Contains the number of non-SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the current 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2CurrEnetFiltStat		1.3.6.1.4.1.1141.2.82.1.1.21
Contains the number of Ethernet packets filtered from this VLAN in the current 15 minute collection period.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2CurrArpIpv4FiltStat		1.3.6.1.4.1.1141.2.82.1.1.22
Contains the number of IPv4 ARP packets filtered from this VLAN in the current 15 minute collection period.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2CurrIpv4FiltStat		1.3.6.1.4.1.1141.2.82.1.1.23
Contains the number of IPv4 packets filtered from this VLAN in the current 15 minute collection period.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2CurrIpv6FiltStat		1.3.6.1.4.1.1141.2.82.1.1.24
Contains the number of IPv6 packets filtered from this VLAN in the current 15 minute collection period.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2CurrIpxFiltStat		1.3.6.1.4.1.1141.2.82.1.1.25
Contains the number of IPX packets filtered from this VLAN in the current 15 minute collection period.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2CurrAppletalkFiltStat		1.3.6.1.4.1.1141.2.82.1.1.26
Contains the number of AppleTalk packets filtered from this VLAN in the current 15 minute collection period.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2CurrOthersFiltStat		1.3.6.1.4.1.1141.2.82.1.1.27
Contains the number of packets that are none of the above type of filters that are filtered from this VLAN in the current 15 minute collection period.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanIpCurrNetbiosFiltStat		1.3.6.1.4.1.1141.2.82.1.1.28
Contains the number of NetBIOS-over-IP packets that are filtered from this VLAN in the current 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2PrevSnapFiltStat		1.3.6.1.4.1.1141.2.82.1.1.29
Contains the number of SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the previous 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2PrevNonSnapFiltStat		1.3.6.1.4.1.1141.2.82.1.1.30
Contains the number of non-SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the previous 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2PrevEnetFiltStat		1.3.6.1.4.1.1141.2.82.1.1.31
Contains the number of Ethernet packets filtered from this VLAN in the previous 15 minute collection period.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2PrevArpIpv4FiltStat		1.3.6.1.4.1.1141.2.82.1.1.32
Contains the number of IPv4 ARP packets filtered from this VLAN in the previous 15 minute collection period.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2PrevIpv4FiltStat		1.3.6.1.4.1.1141.2.82.1.1.33
Contains the number of IPv4 packets filtered from this VLAN in the previous 15 minute collection period.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2PrevIpv6FiltStat		1.3.6.1.4.1.1141.2.82.1.1.34
Contains the number of IPv6 packets filtered from this VLAN in the previous 15 minute collection period.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2PrevIpxFiltStat		1.3.6.1.4.1.1141.2.82.1.1.35
Contains the number of IPX packets filtered from this VLAN in the previous 15 minute collection period.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2PrevAppletalkFiltStat		1.3.6.1.4.1.1141.2.82.1.1.36
Contains the number of AppleTalk packets filtered from this VLAN in the previous 15 minute collection period.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanL2PrevOthersFiltStat		1.3.6.1.4.1.1141.2.82.1.1.37
Contains the number of packets that are none of the above type of filters that are filtered from this VLAN in the previous 15 minute collection period.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hcxVlanIpPrevNetbiosFiltStat		1.3.6.1.4.1.1141.2.82.1.1.38
Contains the number of NetBIOS-over-IP packets that are filtered from this VLAN in the previous 15 minute collection period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

com21HcxOc3VlanStatsTable		1.3.6.1.4.1.1141.2.83.1
.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HcxOc3VlanStatsEntry

com21HcxOc3VlanStatsEntry		1.3.6.1.4.1.1141.2.83.1.1
.
Status: current	Access: not-accessible
OBJECT-TYPE
	HcxOc3VlanStatsEntry

hcxOc3VlanStatsVlanId		1.3.6.1.4.1.1141.2.83.1.1.1
Specifies the index into this table. An entry exists for each vlan which is on the Oc3 Port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..64

hcxOc3VlanStatsCurrTxPkts		1.3.6.1.4.1.1141.2.83.1.1.2
Specifies the number of Pkts. Transmitted on the VPI/VCI value associated with this entry in the current 15-min time period.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hcxOc3VlanStatsCurrRxPkts		1.3.6.1.4.1.1141.2.83.1.1.3
Specifies the number of Pkts. Received on the VPI/VCI value associated with this entry in the current 15-min time period.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hcxOc3VlanStatsCurrCrcPkts		1.3.6.1.4.1.1141.2.83.1.1.4
Specifies the number of Pkts. Received with CRC error on the VPI/VCI value associated with this entry in the current 15-min time period.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hcxOc3VlanStatsPrevTxPkts		1.3.6.1.4.1.1141.2.83.1.1.5
Specifies the number of Pkts. Transmitted on the VPI/VCI value associated with this entry in the previous 15-min time period.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hcxOc3VlanStatsPrevRxPkts		1.3.6.1.4.1.1141.2.83.1.1.6
Specifies the number of Pkts. Received on the VPI/VCI value associated with this entry in the previous 15-min time period.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hcxOc3VlanStatsPrevCrcPkts		1.3.6.1.4.1.1141.2.83.1.1.7
Specifies the number of Pkts. Received with CRC error on the VPI/VCI value associated with this entry in the previous 15-min time period.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hcxOc3VlanStatsClear		1.3.6.1.4.1.1141.2.83.1.1.8
Provides the capability to clear the statistics. Clearing of Statistics is allowed only if hcxStatsControl attribute is set to wrapCurr.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	nil(1), clear(2)