CPQIDE-MIB

File: CPQIDE-MIB.mib (58623 bytes)

Imported modules

CPQHOST-MIB RFC1155-SMI RFC1213-MIB
RFC-1212 RFC-1215

Imported symbols

compaq enterprises Counter
Gauge DisplayString OBJECT-TYPE
TRAP-TYPE sysName cpqHoTrapFlags

Defined Types

CpqIdeOsCommonModuleEntry  
SEQUENCE    
  cpqIdeOsCommonModuleIndex INTEGER
  cpqIdeOsCommonModuleName DisplayString
  cpqIdeOsCommonModuleVersion DisplayString
  cpqIdeOsCommonModuleDate OCTET STRING
  cpqIdeOsCommonModulePurpose DisplayString

CpqIdeIdentEntry  
SEQUENCE    
  cpqIdeIdentIndex INTEGER
  cpqIdeIdentModel DisplayString
  cpqIdeIdentSerNum DisplayString
  cpqIdeIdentFWVers DisplayString
  cpqIdeIdentCondition INTEGER
  cpqIdeIdentErrorNumber DisplayString
  cpqIdeIdentType INTEGER
  cpqIdeIdentTypeExtended INTEGER
  cpqIdeIdentCondition2 INTEGER
  cpqIdeIdentStatus INTEGER
  cpqIdeIdentUltraAtaAvailability INTEGER

CpqIdeControllerEntry  
SEQUENCE    
  cpqIdeControllerIndex INTEGER
  cpqIdeControllerOverallCondition INTEGER
  cpqIdeControllerModel DisplayString
  cpqIdeControllerFwRev DisplayString
  cpqIdeControllerSlot INTEGER
  cpqIdeControllerStatus INTEGER
  cpqIdeControllerCondition INTEGER
  cpqIdeControllerSerialNumber DisplayString

CpqIdeAtaDiskEntry  
SEQUENCE    
  cpqIdeAtaDiskControllerIndex INTEGER
  cpqIdeAtaDiskIndex INTEGER
  cpqIdeAtaDiskModel DisplayString
  cpqIdeAtaDiskFwRev DisplayString
  cpqIdeAtaDiskSerialNumber DisplayString
  cpqIdeAtaDiskStatus INTEGER
  cpqIdeAtaDiskCondition INTEGER
  cpqIdeAtaDiskCapacity INTEGER
  cpqIdeAtaDiskSmartEnabled INTEGER
  cpqIdeAtaDiskTransferMode INTEGER
  cpqIdeAtaDiskChannel INTEGER
  cpqIdeAtaDiskNumber INTEGER
  cpqIdeAtaDiskLogicalDriveMember INTEGER
  cpqIdeAtaDiskIsSpare INTEGER
  cpqIdeAtaDiskOsName DisplayString
  cpqIdeAtaDiskType INTEGER
  cpqIdeAtaDiskSataVersion INTEGER

CpqIdeAtapiDeviceEntry  
SEQUENCE    
  cpqIdeAtapiDeviceControllerIndex INTEGER
  cpqIdeAtapiDeviceIndex INTEGER
  cpqIdeAtapiDeviceModel DisplayString
  cpqIdeAtapiDeviceFwRev DisplayString
  cpqIdeAtapiDeviceType INTEGER
  cpqIdeAtapiDeviceTypeExtended INTEGER
  cpqIdeAtapiDeviceChannel INTEGER
  cpqIdeAtapiDeviceNumber INTEGER

CpqIdeLogicalDriveEntry  
SEQUENCE    
  cpqIdeLogicalDriveControllerIndex INTEGER
  cpqIdeLogicalDriveIndex INTEGER
  cpqIdeLogicalDriveRaidLevel INTEGER
  cpqIdeLogicalDriveCapacity INTEGER
  cpqIdeLogicalDriveStatus INTEGER
  cpqIdeLogicalDriveCondition INTEGER
  cpqIdeLogicalDriveDiskIds OCTET STRING
  cpqIdeLogicalDriveStripeSize INTEGER
  cpqIdeLogicalDriveSpareIds OCTET STRING
  cpqIdeLogicalDriveRebuildingDisk INTEGER
  cpqIdeLogicalDriveOsName DisplayString

Defined Values

cpqIde 1.3.6.1.4.1.232.14
OBJECT IDENTIFIER    

cpqIdeMibRev 1.3.6.1.4.1.232.14.1
OBJECT IDENTIFIER    

cpqIdeComponent 1.3.6.1.4.1.232.14.2
OBJECT IDENTIFIER    

cpqIdeInterface 1.3.6.1.4.1.232.14.2.1
OBJECT IDENTIFIER    

cpqIdeIdent 1.3.6.1.4.1.232.14.2.2
OBJECT IDENTIFIER    

cpqIdeController 1.3.6.1.4.1.232.14.2.3
OBJECT IDENTIFIER    

cpqIdeAtaDisk 1.3.6.1.4.1.232.14.2.4
OBJECT IDENTIFIER    

cpqIdeAtapiDevice 1.3.6.1.4.1.232.14.2.5
OBJECT IDENTIFIER    

cpqIdeLogicalDrive 1.3.6.1.4.1.232.14.2.6
OBJECT IDENTIFIER    

cpqIdeOsCommon 1.3.6.1.4.1.232.14.2.1.4
OBJECT IDENTIFIER    

cpqIdeMibRevMajor 1.3.6.1.4.1.232.14.1.1
The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cpqIdeMibRevMinor 1.3.6.1.4.1.232.14.1.2
The Minor Revision level. A change in the minor revision level may represent some minor additional support; no changes to any pre-existing information has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

cpqIdeMibCondition 1.3.6.1.4.1.232.14.1.3
The overall condition. This object represents the overall status of the Ide system represented by this MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), degraded(3), failed(4)  

cpqIdeOsCommonPollFreq 1.3.6.1.4.1.232.14.2.1.4.1
The Insight Agent's polling frequency. The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero indicates that the Insight Agent retrieves the information upon request of a management station, it does not poll the device driver at a specific interval. If the poll frequency is zero (0) all attempts to write to this object will fail. If the poll frequency is non-zero, setting this value will change the polling frequency of the Insight Agent. Setting the poll frequency to zero will always fail, an agent may also choose to fail any request to change the poll frequency to a value that would severely impact system performance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

cpqIdeOsCommonModuleTable 1.3.6.1.4.1.232.14.2.1.4.2
A table of software modules that provide an interface to the device this MIB describes.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CpqIdeOsCommonModuleEntry

cpqIdeOsCommonModuleEntry 1.3.6.1.4.1.232.14.2.1.4.2.1
A description of a software modules that provide an interface to the device this MIB describes.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  CpqIdeOsCommonModuleEntry  

cpqIdeOsCommonModuleIndex 1.3.6.1.4.1.232.14.2.1.4.2.1.1
A unique index for this module description.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

cpqIdeOsCommonModuleName 1.3.6.1.4.1.232.14.2.1.4.2.1.2
The module name.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

cpqIdeOsCommonModuleVersion 1.3.6.1.4.1.232.14.2.1.4.2.1.3
The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be a null (size 0) string if the agent cannot provide the module version.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..5)  

cpqIdeOsCommonModuleDate 1.3.6.1.4.1.232.14.2.1.4.2.1.4
The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the module date. The hour, minute, and second field will be set to zero (0) if they are not relevant.
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(7)  

cpqIdeOsCommonModulePurpose 1.3.6.1.4.1.232.14.2.1.4.2.1.5
The purpose of the module described in this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

cpqIdeIdentTable 1.3.6.1.4.1.232.14.2.2.1
IDE Drive Identification Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CpqIdeIdentEntry

cpqIdeIdentEntry 1.3.6.1.4.1.232.14.2.2.1.1
IDE Identification Table Entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CpqIdeIdentEntry  

cpqIdeIdentIndex 1.3.6.1.4.1.232.14.2.2.1.1.1
An index that uniquely specifies each device. For disks, this index value will match the value of the cpqSeFixedDiskIndex in the Standard Equipment MIB (CPQSTDEQ.MIB) when the same disk is being described. Each possible index value indicates a specific drive as shown in the table below: Drive Index IDE Controller Drive Unit =========== ============== ========== 0 Primary 1 1 Primary 2 2 Secondary 1 3 Secondary 2 Any other index value would be implementation specific.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

cpqIdeIdentModel 1.3.6.1.4.1.232.14.2.2.1.1.2
IDE Drive Model. The is the drive model name and can be used for identification purposes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..41)  

cpqIdeIdentSerNum 1.3.6.1.4.1.232.14.2.2.1.1.3
IDE Drive Serial Number. The is the drive serial number and can be used for identification purposes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..21)  

cpqIdeIdentFWVers 1.3.6.1.4.1.232.14.2.2.1.1.4
IDE Firmware Version. This is the version of the firmware on the IDE drive. If the IDE drive firmware version is unavailable, then this string will be of length zero (0).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..9)  

cpqIdeIdentCondition 1.3.6.1.4.1.232.14.2.2.1.1.5
IDE Drive Condition. This is the overall condition of the IDE drive. The following values are defined: other(1) The drive does not support drive condition monitoring. ok(2) The drive is operating normally. No user action is required. degraded(3) The drive is degraded. The drive may need to be replaced. failed(4) The drive has failed. The drive should be replaced.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), degraded(3), failed(4)  

cpqIdeIdentErrorNumber 1.3.6.1.4.1.232.14.2.2.1.1.6
IDE Error Number. This value represents the error code associated with a failing IDE drive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

cpqIdeIdentType 1.3.6.1.4.1.232.14.2.2.1.1.7
IDE Device Type. This is the type of ATAPI device. The following types are defined: other(1) The Insight agent does not recognize this type. You may need to upgrade your software. disk(2) This is a direct-access device like a disk drive. tape(3) This is a sequential-access device like a tape drive. printer(4) This is a printer device. processor(5) This is a processor device. worm(6) This is a write-once, read-many times device. cd-rom(7) This is a CD or DVD device. scanner(8) This is a scanner device. optical(9) This is an optical memory device. jukeBox(10) This is a media changer device like a jukebox. commDev(11) This is a communications device like a LAN bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), disk(2), tape(3), printer(4), processor(5), wormDrive(6), cd-rom(7), scanner(8), optical(9), jukeBox(10), commDev(11)  

cpqIdeIdentTypeExtended 1.3.6.1.4.1.232.14.2.2.1.1.8
IDE Extended Device Type. This is additional information about the type of IDE device. The following types are defined: other(1) This target does not have any extended type information. pdcd(2) This is a power-drive CD-ROM. removableDisk(3) This is a removable media disk device like a floppy drive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), pdcd(2), removableDisk(3)  

cpqIdeIdentCondition2 1.3.6.1.4.1.232.14.2.2.1.1.9
IDE Drive Condition. This is the overall condition of the IDE drive. The following values are defined: other(1) The drive does not support drive condition monitoring. ok(2) The drive is operating normally. No user action is required. degraded(3) The drive is degraded. See cpqIdeIdentStatus for the appropriate action. failed(4) The drive has failed. See cpqIdeIdentStatus for the appropriate action.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), degraded(3), failed(4)  

cpqIdeIdentStatus 1.3.6.1.4.1.232.14.2.2.1.1.10
IDE Drive Satus. This indicates the status of the IDE drive. The following values are defined: other(1) The drive does not support drive status monitoring. ok(2) The drive is operating normally. No user action is required. preFailureDegraded(3) The drive has detected that at least one pre-failure SMART attribute has gone out of range. The drive may need to be replaced. ultraAtaDegraded(4) The Ultra ATA Integrity Monitor has detected data transmission errors between the hard drive and processor. For best performance, move Ultra ATA devices to the primary controller and non Ultra ATA devices to the secondary controller. If errors still persist, consider replacing the standard 40-conductor cable with and 80-conductor cable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), preFailureDegraded(3), ultraAtaDegraded(4)  

cpqIdeIdentUltraAtaAvailability 1.3.6.1.4.1.232.14.2.2.1.1.11
This describes the availability of Ultra ATA transfers between this device and the controller. The following values are defined: other(1) The agents do not support reporting this variable or the agent need to be upgraded. noNotSupportedByDeviceAndController(2), The device and the controller do not support Ultra ATA. noNotSupportedByDevice(3), The device does not support Ultra ATA but the controller does support Ultra ATA. noNotSupportedByController(4), The controller does not support Ultra ATA but the device does support Ultra ATA. NoDisabledInSetup(5), The device and the controller do support Ultra ATA but it has been disabled in F10 Setup. yesEnabledInSetup(6), The device and the controller do support Ultra ATA and it is enabled in F10 Setup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noNotSupportedByDeviceAndController(2), noNotSupportedByDevice(3), noNotSupportedByController(4), noDisabledInSetup(5), yesEnabledInSetup(6)  

cpqIdeControllerTable 1.3.6.1.4.1.232.14.2.3.1
IDE Controller Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CpqIdeControllerEntry

cpqIdeControllerEntry 1.3.6.1.4.1.232.14.2.3.1.1
IDE Controller Table Entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CpqIdeControllerEntry  

cpqIdeControllerIndex 1.3.6.1.4.1.232.14.2.3.1.1.1
An index that uniquely identifies each controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqIdeControllerOverallCondition 1.3.6.1.4.1.232.14.2.3.1.1.2
IDE Controller Overall Condition. This is the overall condition of the IDE controller and any associated devices.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), degraded(3), failed(4)  

cpqIdeControllerModel 1.3.6.1.4.1.232.14.2.3.1.1.3
IDE Controller Model. The is the IDE controller model name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cpqIdeControllerFwRev 1.3.6.1.4.1.232.14.2.3.1.1.4
IDE Controller Firmware Revision. The is the IDE controller firmware revision.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cpqIdeControllerSlot 1.3.6.1.4.1.232.14.2.3.1.1.5
IDE Controller Slot. This identifies the physical slot where the IDE controller resides in the system. For example, if this value is three, the controller is located in slot three of your computer. If the value cannot be determined or is not applicable, the value is set to -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqIdeControllerStatus 1.3.6.1.4.1.232.14.2.3.1.1.6
IDE Channel Host Controller Status. The host controller can be in one of the following states: Other (1) The agent is unable to determine the status of the controller. OK (2) Indicates that the controller is in normal operation mode. Failed (3) Indicates that the host controller has failed and should be replaced.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), failed(3)  

cpqIdeControllerCondition 1.3.6.1.4.1.232.14.2.3.1.1.7
IDE Controller Condition. This is the condition of the IDE controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), degraded(3), failed(4)  

cpqIdeControllerSerialNumber 1.3.6.1.4.1.232.14.2.3.1.1.8
IDE Controller Serial Number. The is the IDE controller serial number. A NULL string indicates that the serial number could not be determined or is irrelevant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cpqIdeAtaDiskTable 1.3.6.1.4.1.232.14.2.4.1
IDE ATA Disk Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CpqIdeAtaDiskEntry

cpqIdeAtaDiskEntry 1.3.6.1.4.1.232.14.2.4.1.1
IDE ATA Disk Table Entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CpqIdeAtaDiskEntry  

cpqIdeAtaDiskControllerIndex 1.3.6.1.4.1.232.14.2.4.1.1.1
An index that uniquely identifies each controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqIdeAtaDiskIndex 1.3.6.1.4.1.232.14.2.4.1.1.2
An index that uniquely identifies each disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqIdeAtaDiskModel 1.3.6.1.4.1.232.14.2.4.1.1.3
ATA Disk Model. The is the model name of the ATA disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cpqIdeAtaDiskFwRev 1.3.6.1.4.1.232.14.2.4.1.1.4
ATA Disk Firmware Revision. The is the firmware revision of the ATA disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cpqIdeAtaDiskSerialNumber 1.3.6.1.4.1.232.14.2.4.1.1.5
ATA Disk Serial Number. The is the serial number of the ATA disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cpqIdeAtaDiskStatus 1.3.6.1.4.1.232.14.2.4.1.1.6
ATA Disk Status. This is the status of the ATA disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), smartError(3), failed(4)  

cpqIdeAtaDiskCondition 1.3.6.1.4.1.232.14.2.4.1.1.7
ATA Disk Condition. This is the condition of the ATA disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), degraded(3), failed(4)  

cpqIdeAtaDiskCapacity 1.3.6.1.4.1.232.14.2.4.1.1.8
ATA Disk Capacity. This is the capacity of the ATA disk in megabytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqIdeAtaDiskSmartEnabled 1.3.6.1.4.1.232.14.2.4.1.1.9
ATA Disk S.M.A.R.T Enabled? other(1) The agent cannot determine the state of S.M.A.R.T. monitoring on this ATA disk. true(2) The ATA disk has S.M.A.R.T motitoring enabled. false(3) The ATA disk does not have S.M.A.R.T motitoring enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), true(2), false(3)  

cpqIdeAtaDiskTransferMode 1.3.6.1.4.1.232.14.2.4.1.1.10
ATA Disk Transfer Mode. other(1) The agent cannot determine the transfer mode on this ATA disk. pioMode0(2) The ATA disk is using PIO mode 0. pioMode1(3) The ATA disk is using PIO mode 1. pioMode2(4) The ATA disk is using PIO mode 2. pioMode3(5) The ATA disk is using PIO mode 3. pioMode4(6) The ATA disk is using PIO mode 4. dmaMode0(7) The ATA disk is using DMA mode 0. dmaMode1(8) The ATA disk is using DMA mode 1. dmaMode2(9) The ATA disk is using DMA mode 2. ultraDmaMode0(10) The ATA disk is using Ultra DMA mode 0. ultraDmaMode1(11) The ATA disk is using Ultra DMA mode 1. ultraDmaMode2(12) The ATA disk is using Ultra DMA mode 2. ultraDmaMode3(13) The ATA disk is using Ultra DMA mode 3. ultraDmaMode4(14) The ATA disk is using Ultra DMA mode 4. ultraDmaMode5(15) The ATA disk is using Ultra DMA mode 5.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), pioMode0(2), pioMode1(3), pioMode2(4), pioMode3(5), pioMode4(6), dmaMode0(7), dmaMode1(8), dmaMode2(9), ultraDmaMode0(10), ultraDmaMode1(11), ultraDmaMode2(12), ultraDmaMode3(13), ultraDmaMode4(14), ultraDmaMode5(15)  

cpqIdeAtaDiskChannel 1.3.6.1.4.1.232.14.2.4.1.1.11
ATA Disk Channel. other(1) The agent cannot determine the channel to which the ATA disk is attached. channel0(2) The ATA disk is attached to the primary channel. channel1(3) The ATA disk is attached to the secondary channel. serial(4) The disk is attached to the serial interface and channel no longer applies.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), channel0(2), channel1(3), serial(4)  

cpqIdeAtaDiskNumber 1.3.6.1.4.1.232.14.2.4.1.1.12
ATA Disk Number. other(1) The agent cannot determine the number of the ATA disk. device0(2) The ATA disk is device 0 (master). device1(3) The ATA disk is device 1 (slave). sataDevice0(4) The SATA disk is device 0. sataDevice1(5) The SATA disk is device 1. sataDevice2(6) The SATA disk is device 2. sataDevice3(7) The SATA disk is device 3. sataDevice4(8) The SATA disk is device 4. sataDevice5(9) The SATA disk is device 5. sataDevice6(10) The SATA disk is device 6. sataDevice7(11) The SATA disk is device 7. bay1(21) The disk is in bay 1. bay2(22) The disk is in bay 2. bay3(23) The disk is in bay 3. bay4(24) The disk is in bay 4. bay5(25) The disk is in bay 5. bay6(26) The disk is in bay 6. bay7(27) The disk is in bay 7. bay8(28) The disk is in bay 8.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), device0(2), device1(3), sataDevice0(4), sataDevice1(5), sataDevice2(6), sataDevice3(7), sataDevice4(8), sataDevice5(9), sataDevice6(10), sataDevice7(11), bay1(21), bay2(22), bay3(23), bay4(24), bay5(25), bay6(26), bay7(27), bay8(28)  

cpqIdeAtaDiskLogicalDriveMember 1.3.6.1.4.1.232.14.2.4.1.1.13
Logical Drive Membership? other(1) The agent cannot determine if the ATA disk is part of a logical drive. true(2) The ATA disk is part of a logical drive. false(3) The ATA disk is not part of a logical drive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), true(2), false(3)  

cpqIdeAtaDiskIsSpare 1.3.6.1.4.1.232.14.2.4.1.1.14
ATA Disk Spare? other(1) The agent cannot determine if the ATA disk is a spare. true(2) The ATA disk is a spare disk. false(3) The ATA disk is not a spare disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), true(2), false(3)  

cpqIdeAtaDiskOsName 1.3.6.1.4.1.232.14.2.4.1.1.15
ATA Disk OS Name. The OS name for this ATA disk. This field will be a null (size 0) string if the agent does not support OS name or if the ATA disk is part of a logical drive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

cpqIdeAtaDiskType 1.3.6.1.4.1.232.14.2.4.1.1.16
ATA Disk Type other(1) The agent cannot determine the disk type. ata(2) The disk type is parallel ATA. sata(3) The disk type is Serial ATA.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ata(2), sata(3)  

cpqIdeAtaDiskSataVersion 1.3.6.1.4.1.232.14.2.4.1.1.17
Physical Drive SATA Version. The following values are defined: other(1) The agent is unable to determine the SATA version for this disk or it is not a SATA disk. sataOne(2) The disk is SATA version one. sataTwo(3) The disk is SATA version two.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), sataOne(2), sataTwo(3)  

cpqIdeAtapiDeviceTable 1.3.6.1.4.1.232.14.2.5.1
IDE ATAPI Device Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CpqIdeAtapiDeviceEntry

cpqIdeAtapiDeviceEntry 1.3.6.1.4.1.232.14.2.5.1.1
IDE ATAPI Device Table Entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CpqIdeAtapiDeviceEntry  

cpqIdeAtapiDeviceControllerIndex 1.3.6.1.4.1.232.14.2.5.1.1.1
An index that uniquely identifies each controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqIdeAtapiDeviceIndex 1.3.6.1.4.1.232.14.2.5.1.1.2
An index that uniquely identifies each ATAPI device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqIdeAtapiDeviceModel 1.3.6.1.4.1.232.14.2.5.1.1.3
ATAPI Device Model. The is the model name of the ATAPI device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cpqIdeAtapiDeviceFwRev 1.3.6.1.4.1.232.14.2.5.1.1.4
ATAPI Device Firmware Revision. The is the firmware revision of the ATAPI device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cpqIdeAtapiDeviceType 1.3.6.1.4.1.232.14.2.5.1.1.5
ATAPI Device Type. This is the type of ATAPI device. The following types are defined: other(1) The agent does not recognize this type. You may need to upgrade your software. disk(2) This is a direct-access device like a disk drive. tape(3) This is a sequential-access device like a tape drive. printer(4) This is a printer device. processor(5) This is a processor device. worm(6) This is a write-once, read-many times device. cd-rom(7) This is a CD or DVD device. scanner(8) This is a scanner device. optical(9) This is an optical memory device. jukeBox(10) This is a media changer device like a jukebox. commDev(11) This is a communications device like a LAN bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), disk(2), tape(3), printer(4), processor(5), wormDrive(6), cd-rom(7), scanner(8), optical(9), jukeBox(10), commDev(11)  

cpqIdeAtapiDeviceTypeExtended 1.3.6.1.4.1.232.14.2.5.1.1.6
ATAPI Extended Device Type. This is additional information about the type of ATAPI device. The following types are defined: other(1) This target does not have any extended type information. pdcd(2) This is a power-drive CD-ROM. removableDisk(3) This is a removable media disk device like a floppy drive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), pdcd(2), removableDisk(3)  

cpqIdeAtapiDeviceChannel 1.3.6.1.4.1.232.14.2.5.1.1.7
ATAPI Device Channel. other(1) The agent cannot determine the channel to which the ATAPI device is attached. channel0(2) The ATAPI device is attached to the primary channel. channel1(3) The ATAPI device is attached to the secondary channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), channel0(2), channel1(3)  

cpqIdeAtapiDeviceNumber 1.3.6.1.4.1.232.14.2.5.1.1.8
ATAPI Device Number. other(1) The agent cannot determine the number of the ATAPI device. device0(2) The ATAPI device is device 0 (master). device1(3) The ATAPI device is device 1 (slave).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), device0(2), device1(3)  

cpqIdeLogicalDriveTable 1.3.6.1.4.1.232.14.2.6.1
IDE Logical Drive Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CpqIdeLogicalDriveEntry

cpqIdeLogicalDriveEntry 1.3.6.1.4.1.232.14.2.6.1.1
IDE Logical Drive Table Entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CpqIdeLogicalDriveEntry  

cpqIdeLogicalDriveControllerIndex 1.3.6.1.4.1.232.14.2.6.1.1.1
An index that uniquely identifies each controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqIdeLogicalDriveIndex 1.3.6.1.4.1.232.14.2.6.1.1.2
An index that uniquely identifies each logical drive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqIdeLogicalDriveRaidLevel 1.3.6.1.4.1.232.14.2.6.1.1.3
IDE Logical Drive RAID Level. The following RAID levels are defined: other(1) The agent cannot determine the RAID level of this logical drive. raid0(2) The logical drive is configured with RAID level 0. raid1(3) The logical drive is configured with RAID level 1. raid0plus1(4) The logical drive is configured with RAID level 0 plus 1. raid5(5) The logical drive is configured with RAID level 5. raid15(6) The logical drive is configured with RAID level 1 plus 5. volume(7) The logical drive is configured as a volume set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), raid0(2), raid1(3), raid0plus1(4), raid5(5), raid15(6), volume(7)  

cpqIdeLogicalDriveCapacity 1.3.6.1.4.1.232.14.2.6.1.1.4
IDE Logical Drive Capacity. This is the capacity of the logical drive in megabytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqIdeLogicalDriveStatus 1.3.6.1.4.1.232.14.2.6.1.1.5
IDE Logical Drive Status. This is the status of the logical drive. other(1) The agent cannot determine the logical drive status. ok(2) Indicates that the logical drive is in normal operation mode. degraded(3) Indicates that at least one physical drive has failed, but the logical drive's RAID level lets the drive continue to operate with no data loss. rebuilding(4) Indicates that the logical drive is rebuilding a physical drive. When complete, the logical drive will return to normal operation. failed(5) Indicates that more physical drives have failed than the RAID level of the logical drive can handle without data loss.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), degraded(3), rebuilding(4), failed(5)  

cpqIdeLogicalDriveCondition 1.3.6.1.4.1.232.14.2.6.1.1.6
IDE Logical Drive Condition. This is the condition of the logical drive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), degraded(3), failed(4)  

cpqIdeLogicalDriveDiskIds 1.3.6.1.4.1.232.14.2.6.1.1.7
IDE Logical Drive Disk ID list. This lists the ATA disks drive IDs which are associated with this logical drive. These are the same IDs which can be used as indices into the ATA disk table (cpqIdeAtaDiskIndex). Each byte of the string is an index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

cpqIdeLogicalDriveStripeSize 1.3.6.1.4.1.232.14.2.6.1.1.8
IDE Logical Drive Stripe Size. This is the stripe size in kilobytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqIdeLogicalDriveSpareIds 1.3.6.1.4.1.232.14.2.6.1.1.9
IDE Logical Drive Spare ID list. This lists the ATA disks drive IDs which are possible spares for this logical drive. These are the same IDs which can be used as indices into the ATA disk table (cpqIdeAtaDiskIndex). Each byte of the string is an index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

cpqIdeLogicalDriveRebuildingDisk 1.3.6.1.4.1.232.14.2.6.1.1.10
IDE Logical Drive Rebuilding Disk. This is the ATA disk that is in the process of rebuilding. If no drive is currently rebuilding, a value of -1 will be returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqIdeLogicalDriveOsName 1.3.6.1.4.1.232.14.2.6.1.1.11
IDE Logical Drive OS Name. The OS name for this logical drive. This field will be a null (size 0) string if the agent does not support OS name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

cpqIdeDriveDegraded 14001
An IDE drive status has been set to degraded. User Action: The drive should be scheduled for replacement. Refer to the appropriate Maintenance and Service Guide for detailed information on a component replacement.
TRAP-TYPE    

cpqIdeDriveOk 14002
An IDE drive status has been set to ok. User Action: None.
TRAP-TYPE    

cpqIdeDriveUltraAtaDegraded 14003
An IDE drive detects an excessive number of Ultra ATA data transmission errors between the hard drive and the processor. User Action: For best performance move Ultra ATA devices to the primary controller and non Ultra ATA devices to the secondary controller. If errors still persist, consider replacing the standard 40-conductor IDE cable with an 80-conductor Ultra ATA cable.
TRAP-TYPE    

cpqIdeAtaDiskStatusChange 14004
ATA Disk Status Change. This trap signifies that the agent has detected a change in the status of an ATA disk drive. The variable cpqIdeAtaDiskStatus indicates the current disk drive status. User Action: If the physical drive status is smartError(3) or failed(4), replace the drive.
TRAP-TYPE    

cpqIdeLogicalDriveStatusChange 14005
IDE Logical Drive Status Change. This trap signifies that the agent has detected a change in the status of an IDE logical drive. The variable cpqIdeLogicalDriveStatus indicates the current logical drive status. User Action: If the logical drive status is failed(5), examine the array for failed drives that need replacement.
TRAP-TYPE