CPQN5226A-MIB

File: CPQN5226A-MIB.mib (57888 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
CPQNUNIF-MIB RFC-1215

Imported symbols

enterprises Counter DisplayString
ifIndex OBJECT-TYPE CpqnRowStatus
TRAP-TYPE

Defined Types

Cpqn52nnPowerSupplyEntry  
SEQUENCE    
  cpqn52nnPsIndex INTEGER
  cpqn52nnPsStatus INTEGER

Cpqn52nnPortMemThreshEntry  
SEQUENCE    
  cpqn52nnPortThreshIfIndex INTEGER
  cpqn52nnPortTxPktThreshEnable INTEGER
  cpqn52nnPortTxPktCongestionStatus INTEGER
  cpqn52nnPortTxPktCnt INTEGER
  cpqn52nnPortTxPktCeiling INTEGER
  cpqn52nnPortTxPktHysteresisCtl INTEGER
  cpqn52nnPortRxMemThreshEnable INTEGER
  cpqn52nnPortRxMemCongestionStatus INTEGER
  cpqn52nnPortRxMemSectorCnt INTEGER
  cpqn52nnPortRxMemCeiling INTEGER
  cpqn52nnPortRxMemHysteresisCtl INTEGER
  cpqn52nnPortCongestionTrapEnable INTEGER

Cpqn52nnDramEntry  
SEQUENCE    
  cpqn52nnDramIndex INTEGER
  cpqn52nnDramSize INTEGER
  cpqn52nnDramType INTEGER
  cpqn52nnDramSpeed INTEGER

Cpqn52nnPortStatusEntry  
SEQUENCE    
  cpqn52nnPortIfIndex INTEGER
  cpqn52nnPortIfMauIndex INTEGER
  cpqn52nnPortName DisplayString
  cpqn52nnPortType INTEGER
  cpqn52nnMdiMdixStatus INTEGER
  cpqn52nnMdiMdixEnable INTEGER

Cpqn52nnPortMonitorEntry  
SEQUENCE    
  cpqn52nnPortMonitorIndex INTEGER
  cpqn52nnPortMonitorRowStatus CpqnRowStatus
  cpqn52nnPortMonitorIfIndex INTEGER
  cpqn52nnPortMonitoredIfMap INTEGER
  cpqn52nnPortMonitoredDataType INTEGER

Cpqn52nnPortBondingEntry  
SEQUENCE    
  cpqn52nnBondIndex INTEGER
  cpqn52nnBondRowStatus CpqnRowStatus
  cpqn52nnBondMap INTEGER

Cpqn52nnIfStatusEntry  
SEQUENCE    
  cpqn52nnIfStatusIfIndex INTEGER
  cpqn52nnIfStatusIfType INTEGER
  cpqn52nnIfStpStatus INTEGER
  cpqn52nnIfResetStatus INTEGER
  cpqn52nnIfLearningStatus INTEGER
  cpqn52nnIfAgingStatus INTEGER
  cpqn52nnIfAgingTime INTEGER
  cpqn52nnIfSwitchModeSrcStatus INTEGER
  cpqn52nnIfSwitchModeDestStatus INTEGER
  cpqn52nnIfSwitchModeSrc INTEGER
  cpqn52nnIfSwitchModeDest INTEGER
  cpqn52nnIfArbPriority INTEGER

Cpqn52nnQuadIfEntry  
SEQUENCE    
  cpqn52nnQuadIfIndex INTEGER
  cpqn52nnQuadIfAlignFcsErrors Counter
  cpqn52nnQuadIfTxRunts Counter
  cpqn52nnQuadIfRxRunts Counter
  cpqn52nnQuadIfTotalCollisions Counter

Cpqn52nnQuadIfCfgEntry  
SEQUENCE    
  cpqn52nnQuadIfCfgIndex INTEGER
  cpqn52nnQuadIfCfgMauIndex INTEGER
  cpqn52nnQuadIfCfgLinkForce INTEGER
  cpqn52nnQuadIfCfgLinkPolarityCorrect INTEGER

Cpqn52nnTlanIfEntry  
SEQUENCE    
  cpqn52nnTlanIfIndex INTEGER
  cpqn52nnTlanIfTxGoodFrms Counter
  cpqn52nnTlanIfRxUndersizeFrms Counter
  cpqn52nnTlanIfRxOverruns Counter
  cpqn52nnTlanIfRxAlignSymbolErrs Counter

Cpqn52nnBusMonEntry  
SEQUENCE    
  cpqn52nnBusMonIndex INTEGER
  cpqn52nnBusMonRowStatus CpqnRowStatus
  cpqn52nnBusMonBusType INTEGER
  cpqn52nnBusMonDataType INTEGER
  cpqn52nnBusMonPktType INTEGER
  cpqn52nnBusMonSwitchModeType INTEGER
  cpqn52nnBusMonCurrentUtilization INTEGER
  cpqn52nnBusMonPeakUtilization INTEGER
  cpqn52nnBusMonRisingThreshold INTEGER
  cpqn52nnBusMonFallingThreshold INTEGER
  cpqn52nnBusMonAction INTEGER
  cpqn52nnBusMonTrapEnable INTEGER

Defined Values

compaq 1.3.6.1.4.1.232
OBJECT IDENTIFIER    

compaq-dallas-npd 1.3.6.1.4.1.232.101
OBJECT IDENTIFIER    

switchedMedia 1.3.6.1.4.1.232.101.2
OBJECT IDENTIFIER    

cpqn52nn 1.3.6.1.4.1.232.101.2.2
OBJECT IDENTIFIER    

cpqn52nnOIDInfo 1.3.6.1.4.1.232.101.2.2.1
OBJECT IDENTIFIER    

cpqn52nnModuleInfo 1.3.6.1.4.1.232.101.2.2.2
OBJECT IDENTIFIER    

cpqn52nnMemoryInfo 1.3.6.1.4.1.232.101.2.2.3
OBJECT IDENTIFIER    

cpqn52nnPortInfo 1.3.6.1.4.1.232.101.2.2.4
OBJECT IDENTIFIER    

cpqn52nnIfStatusInfo 1.3.6.1.4.1.232.101.2.2.5
OBJECT IDENTIFIER    

cpqn52nnIfStatsInfo 1.3.6.1.4.1.232.101.2.2.6
OBJECT IDENTIFIER    

cpqn52nnSwitchStatsInfo 1.3.6.1.4.1.232.101.2.2.7
OBJECT IDENTIFIER    

cpqn52nnBusMonitorInfo 1.3.6.1.4.1.232.101.2.2.8
OBJECT IDENTIFIER    

cpqn52nnHashInfo 1.3.6.1.4.1.232.101.2.2.3.1
OBJECT IDENTIFIER    

cpqn52nnRmonMemory 1.3.6.1.4.1.232.101.2.2.3.2
OBJECT IDENTIFIER    

cpqn52nnMemoryThreshold 1.3.6.1.4.1.232.101.2.2.3.3
OBJECT IDENTIFIER    

cpqn52nnDramInfo 1.3.6.1.4.1.232.101.2.2.3.4
OBJECT IDENTIFIER    

cpqn52nnHashMemory 1.3.6.1.4.1.232.101.2.2.7.1
OBJECT IDENTIFIER    

cpqn52nnDropPkts 1.3.6.1.4.1.232.101.2.2.7.2
OBJECT IDENTIFIER    

cpqn52nnQuadCascade 1.3.6.1.4.1.232.101.2.2.6.1
OBJECT IDENTIFIER    

cpqn52nnTlan 1.3.6.1.4.1.232.101.2.2.6.2
OBJECT IDENTIFIER    

cpqn5226 1.3.6.1.4.1.232.101.2.2.1.1
OBJECT IDENTIFIER    

cpqn5226A 1.3.6.1.4.1.232.101.2.2.1.3
OBJECT IDENTIFIER    

cpqn52nnVT100ScreenRefresh 1.3.6.1.4.1.232.101.2.2.2.1
DURABLE: This object will determine the rate, in seconds, at which the VT100 screen will refresh the automatic fields (e.g., statistics). The default value will be 5 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

cpqn52nnBooterWriteCycles 1.3.6.1.4.1.232.101.2.2.2.2
This object will allow the user to see the number of erase/writes that have been made to the Booter firmware sectors on the FLASH PROM chip.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnRuntimeWriteCycles 1.3.6.1.4.1.232.101.2.2.2.3
This object will allow the user to see the number of erase/writes that have been made to the Runtime firmware sectors on the FLASH PROM chip.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnSwitchModeType 1.3.6.1.4.1.232.101.2.2.2.4
DURABLE: This object will determine the operational mode of the switch. The default will be store-and-forward(1). Fragment-free is not supported on 5226 nor 5226A.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER store-and-forward(1), cut-through(2), fragment-free(3)  

cpqn52nnCreateTimeout 1.3.6.1.4.1.232.101.2.2.2.5
DURABLE: The minimum number of 5 minute intervals a table entry can have a status of underCreate before the agent may delete the object. The default value will be 1 5 minute interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cpqn52nnPowerSupplyTable 1.3.6.1.4.1.232.101.2.2.2.6
A table of system power supply specific information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cpqn52nnPowerSupplyEntry

cpqn52nnPowerSupplyEntry 1.3.6.1.4.1.232.101.2.2.2.6.1
A list of information for every power supply installed
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cpqn52nnPowerSupplyEntry  

cpqn52nnPsIndex 1.3.6.1.4.1.232.101.2.2.2.6.1.1
A unique value for each power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER power-supply-a(1), power-supply-b(2)  

cpqn52nnPsStatus 1.3.6.1.4.1.232.101.2.2.2.6.1.2
The status of the power supply. The value good(1) is returned if the power supply identified by cpqn52nnPSIndex is running properly. The value bad(2) is returned if the power supply identified by cpqn52nnPSIndex has failed to operate properly but has been inserted into the slot. This will include an inserted power supply with no power. The value na(3) is returned if the power supply has not been inserted into the slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER good(1), bad(2), not-present(3)  

cpqn52nnHashTableSize 1.3.6.1.4.1.232.101.2.2.3.1.1
DURABLE: The number of address table entries, in 1024 increments, allowed for the switch. NOTE that a smaller size table will increase the likelihood of broadcasts based on unknown unicasts i.e. addresses that have not been learned. The 5226 and 5226A allows set of 8K only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER eight-K(1), sixteen-K(2), thirty-two-K(3), sixty-four-K(4)  

cpqn52nnMaxMemory 1.3.6.1.4.1.232.101.2.2.3.2.1
Kbytes of memory that can be used for RMON. Actually this number does not include some overhead needed to support the software. This number should be set in the implementation of the agent to assure that memory is always available for the overhead.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnMemAllocFailure 1.3.6.1.4.1.232.101.2.2.3.2.2
The time of the last memory allocation failure that resulted from no more physical memory available in the agent. This value is in seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnRmonMemoryCeiling 1.3.6.1.4.1.232.101.2.2.3.2.3
DURABLE: Kbytes of memory RMON code may use, not counting any overhead.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cpqn52nnStatisticsMemoryCeiling 1.3.6.1.4.1.232.101.2.2.3.2.4
DURABLE: Kbytes of memory that the RMON statistics group may use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cpqn52nnHistoryMemoryCeiling 1.3.6.1.4.1.232.101.2.2.3.2.5
DURABLE: Kbytes of memory that the RMON history group may use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cpqn52nnAlarmMemoryCeiling 1.3.6.1.4.1.232.101.2.2.3.2.6
DURABLE: Kbytes of memory that the RMON alarm group may use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cpqn52nnEventMemoryCeiling 1.3.6.1.4.1.232.101.2.2.3.2.7
DURABLE: Kbytes of memory that the RMON event group may use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cpqn52nnRmonMemoryUsed 1.3.6.1.4.1.232.101.2.2.3.2.8
Kbytes of memory used by RMON, rounded up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnStatisticsMemoryUsed 1.3.6.1.4.1.232.101.2.2.3.2.9
Kbytes of memory that the RMON statistics group has used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnHistoryMemoryUsed 1.3.6.1.4.1.232.101.2.2.3.2.10
Kbytes of memory that the RMON history group has used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnAlarmMemoryUsed 1.3.6.1.4.1.232.101.2.2.3.2.11
Kbytes of memory that the RMON alarm group has used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnEventMemoryUsed 1.3.6.1.4.1.232.101.2.2.3.2.12
Kbytes of memory that the RMON event group has used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnMaxPktMemory 1.3.6.1.4.1.232.101.2.2.3.3.1
Kbytes of memory that can be used for Packet Memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnGlobalMemThreshTrapEnable 1.3.6.1.4.1.232.101.2.2.3.3.2
DURABLE: Enable Traps for all thresholding entries in the Global Memory group of objects. The default value is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cpqn52nnBcastMemThreshEnable 1.3.6.1.4.1.232.101.2.2.3.3.3
DURABLE: Enable thresholding for the Broadcast packet count. The default value is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cpqn52nnBcastPktCeiling 1.3.6.1.4.1.232.101.2.2.3.3.4
DURABLE: Value in 256 packet increments of the falling threshold of the maximum number of broadcast packets allowed in packet buffer memory.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

cpqn52nnBcastHysteresisCtl 1.3.6.1.4.1.232.101.2.2.3.3.5
DURABLE: Number of packets that when added to the Bcast packet ceiling produces the Rising Threshold value of the maximum number of broadcast packets allowed in packet buffer memory.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

cpqn52nnBcastPktCnt 1.3.6.1.4.1.232.101.2.2.3.3.6
Indicator of many broadcast packets are actually in packet buffer memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnBcastCongestionStatus 1.3.6.1.4.1.232.101.2.2.3.3.7
Indicator of broadcast packet congestion. When congested, the number of broadcast packets in packet buffer memory has exceeded the rising threshold, but has not gone below the falling threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER congested(1), not-congested(2)  

cpqn52nnPortMemThreshTable 1.3.6.1.4.1.232.101.2.2.3.3.8
This table defines something.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cpqn52nnPortMemThreshEntry

cpqn52nnPortMemThreshEntry 1.3.6.1.4.1.232.101.2.2.3.3.8.1
This table has one entry for each port. The index into the table is cpqn52nnPortThreshIfIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cpqn52nnPortMemThreshEntry  

cpqn52nnPortThreshIfIndex 1.3.6.1.4.1.232.101.2.2.3.3.8.1.1
The Interface Index as represented in MIB-II.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnPortTxPktThreshEnable 1.3.6.1.4.1.232.101.2.2.3.3.8.1.2
DURABLE: Enables or disabled transmit packet thresholding on a per port basis.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cpqn52nnPortTxPktCongestionStatus 1.3.6.1.4.1.232.101.2.2.3.3.8.1.3
Indicator of port transmit packet congestion. When congested, the number of transmit packets in packet buffer memory for the port has exceeded the rising threshold, but has not gone below the falling threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnPortTxPktCnt 1.3.6.1.4.1.232.101.2.2.3.3.8.1.4
Indicator of how many transmit packets for the port are actually in packet buffer memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnPortTxPktCeiling 1.3.6.1.4.1.232.101.2.2.3.3.8.1.5
DURABLE: Value in 256 packet increments of the falling threshold of the maximum number of transmit packets allowed for the port in packet buffer memory.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4096  

cpqn52nnPortTxPktHysteresisCtl 1.3.6.1.4.1.232.101.2.2.3.3.8.1.6
DURABLE: Number of packets that when added to the port's transmit packet ceiling produces the Rising Threshold value of the maximum number of transmit packets allowed for the port in packet buffer memory.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

cpqn52nnPortRxMemThreshEnable 1.3.6.1.4.1.232.101.2.2.3.3.8.1.7
DURABLE: Enables or disables receive memory thresholding on a per port basis.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cpqn52nnPortRxMemCongestionStatus 1.3.6.1.4.1.232.101.2.2.3.3.8.1.8
Indicator of port receive memory congestion. When congested, the amount of receive packet buffer memory used by the port has exceeded the rising threshold, but has not gone below the falling threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnPortRxMemSectorCnt 1.3.6.1.4.1.232.101.2.2.3.3.8.1.9
Indicator of how amount Packet Receive memory, in 2Kbyte increments, is actually being used by the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnPortRxMemCeiling 1.3.6.1.4.1.232.101.2.2.3.3.8.1.10
DURABLE: Value in 32Kbyte increments of the falling threshold of the maximum receive packet memory allowed for the port in packet buffer memory.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cpqn52nnPortRxMemHysteresisCtl 1.3.6.1.4.1.232.101.2.2.3.3.8.1.11
DURABLE: Value in 2Kbyte increments that when added to the port's receive memory ceiling produces the Rising Threshold value of the maximum receive memory allowed for the port in packet buffer memory.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

cpqn52nnPortCongestionTrapEnable 1.3.6.1.4.1.232.101.2.2.3.3.8.1.12
DURABLE: Enables or disabled traps due to congestion states for any Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cpqn52nnDramTable 1.3.6.1.4.1.232.101.2.2.3.4.1
This table defines the unit's Dram information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cpqn52nnDramEntry

cpqn52nnDramEntry 1.3.6.1.4.1.232.101.2.2.3.4.1.1
This table has one entry for each Dram component. The index into the table is cpqn52nnDramIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cpqn52nnDramEntry  

cpqn52nnDramIndex 1.3.6.1.4.1.232.101.2.2.3.4.1.1.1
A simple index representing the area using the DRAM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER packet-buffers(1), cpu-dram(2)  

cpqn52nnDramSize 1.3.6.1.4.1.232.101.2.2.3.4.1.1.2
Size of DRAM being used, in KBytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnDramType 1.3.6.1.4.1.232.101.2.2.3.4.1.1.3
Type of DRAM being used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fastpage-mode(1), edo(2), synchronous(3)  

cpqn52nnDramSpeed 1.3.6.1.4.1.232.101.2.2.3.4.1.1.4
Speed of DRAM being used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dram-70ns(1), dram-60ns(2)  

cpqn52nnPortStatusTable 1.3.6.1.4.1.232.101.2.2.4.1
This table defines certain Port Level parameters for each port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cpqn52nnPortStatusEntry

cpqn52nnPortStatusEntry 1.3.6.1.4.1.232.101.2.2.4.1.1
This table has one entry for each port. The index into the table is cpqn52nnPortStatusId.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cpqn52nnPortStatusEntry  

cpqn52nnPortIfIndex 1.3.6.1.4.1.232.101.2.2.4.1.1.1
Switch interface number that corresponds to the interface in MIB-II.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnPortIfMauIndex 1.3.6.1.4.1.232.101.2.2.4.1.1.2
Uniquely identifies the port in the CPQN52nn unit for which additional info is being obtained.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnPortName 1.3.6.1.4.1.232.101.2.2.4.1.1.3
DURABLE: User defined name for port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..16)  

cpqn52nnPortType 1.3.6.1.4.1.232.101.2.2.4.1.1.4
This object identifies all possible port types. Note that unknown Port Types are represented by the value 1000.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER empty(1), eth-10-baseT(2), tx(3), fxsc(4), fxst(5), eth-10-100(6), fddi-das(7), fddi-sas(8), fddi-sas-tp-pmd(9), atm(10), unknown(1000)  

cpqn52nnMdiMdixStatus 1.3.6.1.4.1.232.101.2.2.4.1.1.5
This object identifies all possible port types.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER mdi(1), mdi-x(2)  

cpqn52nnMdiMdixEnable 1.3.6.1.4.1.232.101.2.2.4.1.1.6
This object identifies all possible port types.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mdi(1), mdi-x(2), auto-sensing(3)  

cpqn52nnPortMonitorTable 1.3.6.1.4.1.232.101.2.2.4.2
This table defines monitor information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cpqn52nnPortMonitorEntry

cpqn52nnPortMonitorEntry 1.3.6.1.4.1.232.101.2.2.4.2.1
This table can be empty. Entries can be added as needed. The index into the table is cpqn52nnPortMonitorIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cpqn52nnPortMonitorEntry  

cpqn52nnPortMonitorIndex 1.3.6.1.4.1.232.101.2.2.4.2.1.1
A simple index represnting the number of the entry being examined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnPortMonitorRowStatus 1.3.6.1.4.1.232.101.2.2.4.2.1.2
DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a row from this table, set this object for the row to row-invalid(2). This object will always read as row-valid(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  CpqnRowStatus  

cpqn52nnPortMonitorIfIndex 1.3.6.1.4.1.232.101.2.2.4.2.1.3
DURABLE An index based on the interface index in MIB-II. This will represent the interface to be used to monitor the data of others as defined by cpqn52nnPortMonitoredIfMap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cpqn52nnPortMonitoredIfMap 1.3.6.1.4.1.232.101.2.2.4.2.1.4
DURABLE: A bitmap indicating the ports whose data is being monitored. The bits used to represent the are the same as the IfIndex representation of the ports. e.g. port 25 --> 25th bit. An example is 0x00000003, indicates that ports 1 and 3 are being monitored. The port doing the monitoring is defined by cpqn52nnPortMonitorIfIndex for this row in the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cpqn52nnPortMonitoredDataType 1.3.6.1.4.1.232.101.2.2.4.2.1.5
DURABLE: The type of data to be monitored by the monitor port. Selecting TX or RX means that only the TX or RX data will be monitored by the monitor port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tx-only(1), rx-only(2), both-tx-and-rx(3)  

cpqn52nnPortBondingTable 1.3.6.1.4.1.232.101.2.2.4.3
This table defines uplink bonding information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cpqn52nnPortBondingEntry

cpqn52nnPortBondingEntry 1.3.6.1.4.1.232.101.2.2.4.3.1
The index into the table is cpqn52nnBondIndex. The table can be empty.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cpqn52nnPortBondingEntry  

cpqn52nnBondIndex 1.3.6.1.4.1.232.101.2.2.4.3.1.1
A simple index representing the entry number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnBondRowStatus 1.3.6.1.4.1.232.101.2.2.4.3.1.2
DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a row from this table, set this object for the row to row-invalid(2). This object will always read as row-valid(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  CpqnRowStatus  

cpqn52nnBondMap 1.3.6.1.4.1.232.101.2.2.4.3.1.3
DURABLE: A bitmap indicating the uplink ports that are bonded together. The bits used to represent the uplink ports are the same as the If Index representations of the ports. e.g. port 25 --> 25th bit. An example is 0x05000000, indicates that uplink ports 25 and 27 are bonded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cpqn52nnIfStatusTable 1.3.6.1.4.1.232.101.2.2.5.1
This table defines certain switch interface level parameters for each interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cpqn52nnIfStatusEntry

cpqn52nnIfStatusEntry 1.3.6.1.4.1.232.101.2.2.5.1.1
This table has one entry for each switch interface. The index into the table is cpqn52nnIfStatusIfIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cpqn52nnIfStatusEntry  

cpqn52nnIfStatusIfIndex 1.3.6.1.4.1.232.101.2.2.5.1.1.1
The value of the instance of the ifIndex object, defined in MIB-II, for this switch interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnIfStatusIfType 1.3.6.1.4.1.232.101.2.2.5.1.1.2
The type of device used for this switch interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER quad-cascade-lsi-l64381(1), tlan-ti-tnete110(2), qe110-lsi(3)  

cpqn52nnIfStpStatus 1.3.6.1.4.1.232.101.2.2.5.1.1.3
When enabled(1), this interface will participate in Spanning Tree activities. When disabled(2), this interface will not participate in the Spanning Tree algorithm. Default is enabled(1). DURABLE.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cpqn52nnIfResetStatus 1.3.6.1.4.1.232.101.2.2.5.1.1.4
This object will allow the user to physically reset an interface on the CPQN52nn. The advantage over a general reset is that the other interfaces are left unaffected in their operation. The agent will always return interface-not-resetting(1) when the object is read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER interface-not-resetting(1), reset-interface(2)  

cpqn52nnIfLearningStatus 1.3.6.1.4.1.232.101.2.2.5.1.1.5
When enabled(1), this interface can enter the learning state. When disabled(2), this interface is not allowed to enter the learning state. When disabled(2), Spanning Tree must be set to disabled. Default is enabled(1). DURABLE.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cpqn52nnIfAgingStatus 1.3.6.1.4.1.232.101.2.2.5.1.1.6
When enabled(1), this interface ages learned entries in the Address Filter/Forward table. When disabled(2), this interface does not age entries in the address table. Default is enabled(1). DURABLE.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cpqn52nnIfAgingTime 1.3.6.1.4.1.232.101.2.2.5.1.1.7
The timeout period in seconds for aging out dynamically learned forwarding information on the switch interface. DURABLE
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..1000000  

cpqn52nnIfSwitchModeSrcStatus 1.3.6.1.4.1.232.101.2.2.5.1.1.8
The switch mode for this interface when it is the Source in a switch transfer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER store-and-forward(1), cut-through(2), fragment-free(3)  

cpqn52nnIfSwitchModeDestStatus 1.3.6.1.4.1.232.101.2.2.5.1.1.9
The switch mode for this interface when it is the Destination in a switch transfer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER store-and-forward(1), cut-through(2), fragment-free(3)  

cpqn52nnIfSwitchModeSrc 1.3.6.1.4.1.232.101.2.2.5.1.1.10
DURABLE: The switch mode for this interface when it is the Source in a switch transfer. The default case is store-and-forward(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER store-and-forward(1), cut-through(2), fragment-free(3)  

cpqn52nnIfSwitchModeDest 1.3.6.1.4.1.232.101.2.2.5.1.1.11
DURABLE: The switch mode for this interface when it is the Destination in a switch transfer. The default case is store-and-forward(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER store-and-forward(1), cut-through(2), fragment-free(3)  

cpqn52nnIfArbPriority 1.3.6.1.4.1.232.101.2.2.5.1.1.12
DURABLE: The priority mechanism used for arbitration. The possible arbitration states and values are as follows: VALUE ARBITRATION ----- ----------- 0 First-Come-First-Served all port same Round Robin (Fair) all ports varied Round Robin (Weighted) The final case implies that not all ports have the same priority in which case a weighted Round Robin method of arbitration would be used. The default case has all ports with a value of 0 (First-Come-First-Served).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

cpqn52nnQuadIfTable 1.3.6.1.4.1.232.101.2.2.6.1.1
This table provides information, on a per port basis, for the Quad Cascade devices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cpqn52nnQuadIfEntry

cpqn52nnQuadIfEntry 1.3.6.1.4.1.232.101.2.2.6.1.1.1
This table has one entry for each Port. The indices into the table are cpqn52nnQuadIfIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cpqn52nnQuadIfEntry  

cpqn52nnQuadIfIndex 1.3.6.1.4.1.232.101.2.2.6.1.1.1.1
An index representing the interface as in MIN-II.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnQuadIfAlignFcsErrors 1.3.6.1.4.1.232.101.2.2.6.1.1.1.2
Shows the number of packets received between 64 and 1518 bytes in length, but were not an integral number of bytes in length, or had a bad Frame Check Sequence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cpqn52nnQuadIfTxRunts 1.3.6.1.4.1.232.101.2.2.6.1.1.1.3
Shows the number of packets transmitted that were less than 64 bytes in length.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cpqn52nnQuadIfRxRunts 1.3.6.1.4.1.232.101.2.2.6.1.1.1.4
Shows the number of packets received that were less than 64 bytes long that were an integral number of bytes long.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cpqn52nnQuadIfTotalCollisions 1.3.6.1.4.1.232.101.2.2.6.1.1.1.5
Shows the number of collision packets, single and multiple.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cpqn52nnQuadIfCfgTable 1.3.6.1.4.1.232.101.2.2.6.1.2
This table provides information, on a per port basis, for the Quad Cascade devices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cpqn52nnQuadIfCfgEntry

cpqn52nnQuadIfCfgEntry 1.3.6.1.4.1.232.101.2.2.6.1.2.1
This table has one entry for each Port. The index into the table is cpqn52nnQuadIfIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cpqn52nnQuadIfCfgEntry  

cpqn52nnQuadIfCfgIndex 1.3.6.1.4.1.232.101.2.2.6.1.2.1.1
An index representing the interface as in MIN-II.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnQuadIfCfgMauIndex 1.3.6.1.4.1.232.101.2.2.6.1.2.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnQuadIfCfgLinkForce 1.3.6.1.4.1.232.101.2.2.6.1.2.1.3
DURABLE: When enabled, this object allows the port to transmit even if link integrity fails.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cpqn52nnQuadIfCfgLinkPolarityCorrect 1.3.6.1.4.1.232.101.2.2.6.1.2.1.4
DURABLE: When enabled, this allows the port to correct for inverted polarity on the twisted pair interface, if an inverted polarity condition exists on that port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cpqn52nnTlanIfTable 1.3.6.1.4.1.232.101.2.2.6.2.1
This table provides information, on a per port basis, for the Tlan devices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cpqn52nnTlanIfEntry

cpqn52nnTlanIfEntry 1.3.6.1.4.1.232.101.2.2.6.2.1.1
This table has one entry for each Port. The index into the table is cpqn52nnTlanIfIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cpqn52nnTlanIfEntry  

cpqn52nnTlanIfIndex 1.3.6.1.4.1.232.101.2.2.6.2.1.1.1
A simple index representing the Port in the table representing the IfIndex in MIB-II.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnTlanIfTxGoodFrms 1.3.6.1.4.1.232.101.2.2.6.2.1.1.2
Shows the number of packets transmitted that were good (no errors).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cpqn52nnTlanIfRxUndersizeFrms 1.3.6.1.4.1.232.101.2.2.6.2.1.1.3
Shows the number of packets that were
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cpqn52nnTlanIfRxOverruns 1.3.6.1.4.1.232.101.2.2.6.2.1.1.4
Shows the number of packets received that were
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cpqn52nnTlanIfRxAlignSymbolErrs 1.3.6.1.4.1.232.101.2.2.6.2.1.1.5
Shows the number of packets received that had either Alignment errors or Symbol errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cpqn52nnHashStaticNum 1.3.6.1.4.1.232.101.2.2.7.1.1
A count of static entries in this switch interface's Address Forwarding/Filtering mechanism.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnHashDynamicNum 1.3.6.1.4.1.232.101.2.2.7.1.2
A count of dynamic entries in this switch interface's Address Forwarding/Filtering mechanism.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnHashChainNum 1.3.6.1.4.1.232.101.2.2.7.1.3
A count of indices in the Address Filter/Forward mechanism's hash table which have more than one MAC Address entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnHashChainLength 1.3.6.1.4.1.232.101.2.2.7.1.4
A count of the number of MAC Address entries in the longest chain in the Address Filter/Forward mechanism's hash table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnDropsWholeMemoryCtr 1.3.6.1.4.1.232.101.2.2.7.2.1
Counter to indicate the total number of packets dropped due to memory overflow. This is exclusive of the other counters in this section.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cpqn52nnDropsBcastMemoryCtr 1.3.6.1.4.1.232.101.2.2.7.2.2
Counter to indicate the total number of packets dropped due to memory overflow in the area handling Broadcast packets only. This is exclusive of the other counters in this section.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cpqn52nnDropsIfMemoryCtr 1.3.6.1.4.1.232.101.2.2.7.2.3
Counter to indicate the total number of packets dropped due to memory overflow in the area handling interface TX/RX packets only. This is exclusive of the other counters in this section.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cpqn52nnBusMonTable 1.3.6.1.4.1.232.101.2.2.8.1
This table defines the unit's utilization information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cpqn52nnBusMonEntry

cpqn52nnBusMonEntry 1.3.6.1.4.1.232.101.2.2.8.1.1
This table has one entry for each bus component. The index into the table is cpqn52nnBusMonIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cpqn52nnBusMonEntry  

cpqn52nnBusMonIndex 1.3.6.1.4.1.232.101.2.2.8.1.1.1
A simple index representing the entry in the table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnBusMonRowStatus 1.3.6.1.4.1.232.101.2.2.8.1.1.2
DURABLE: The status of this alarm entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  CpqnRowStatus  

cpqn52nnBusMonBusType 1.3.6.1.4.1.232.101.2.2.8.1.1.3
DURABLE: The type of bus to be monitored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mac-bus(1), mem-bus(2)  

cpqn52nnBusMonDataType 1.3.6.1.4.1.232.101.2.2.8.1.1.4
DURABLE: The type of data to be monitored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tx-only(1), rx-only(2), both-tx-and-rx(3)  

cpqn52nnBusMonPktType 1.3.6.1.4.1.232.101.2.2.8.1.1.5
DURABLE: The type of data to be monitored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pkt-data-only(1), pkt-overhead-only(2), both-data-and-overhead(3)  

cpqn52nnBusMonSwitchModeType 1.3.6.1.4.1.232.101.2.2.8.1.1.6
DURABLE: The type of packets monitored for data.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER store-and-forward-only(1), cut-through-only(2), both-switch-modes(3)  

cpqn52nnBusMonCurrentUtilization 1.3.6.1.4.1.232.101.2.2.8.1.1.7
Utilization of the selected port calculated as a percentage of the total bandwidth available for the bus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnBusMonPeakUtilization 1.3.6.1.4.1.232.101.2.2.8.1.1.8
Utilization of the selected port calculated as a percentage of the total bandwidth available for the bus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpqn52nnBusMonRisingThreshold 1.3.6.1.4.1.232.101.2.2.8.1.1.9
DURABLE: If this threshold is exceeded, then the action listed in ThresholdAction will take place. The value is a % utilzation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cpqn52nnBusMonFallingThreshold 1.3.6.1.4.1.232.101.2.2.8.1.1.10
DURABLE: If this threshold is exceeded, then the action listed in ThresholdAction will take place. The value is a % utilzation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cpqn52nnBusMonAction 1.3.6.1.4.1.232.101.2.2.8.1.1.11
DURABLE: If this threshold is exceeded, then the action listed in ThresholdAction will take place. The value is an absolute number in bytes/sec.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER filter(1), backpressure(2), filter-broadcast(3)  

cpqn52nnBusMonTrapEnable 1.3.6.1.4.1.232.101.2.2.8.1.1.12
DURABLE: Enable Trap Generation if threshold is exceeded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cpqn52nnPowerSupplyStatusTrap 1
A cpqn52nnPowerSupplyStatus Trap is sent whenever a power supply changes state from voltage-ok to voltage-not-ok or vice versa.
TRAP-TYPE    

cpqn52nnUplinkInsertedTrap 2
The cpqn52nnMepInserted trap is sent whenever a MEP, that represents a physical interface, is added.
TRAP-TYPE    

cpqn52nnUplinkRemovedTrap 3
The cpqn52nnMepRemoved trap is sent whenever a MEP, that represents a physical interface, is removed.
TRAP-TYPE    

cpqn52nnBusMonRisingThresholdTrap 4
The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
TRAP-TYPE    

cpqn52nnBusMonFallingThresholdTrap 5
The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
TRAP-TYPE    

cpqb52nnGlobalBcastMemCongestionTrap 7
The SNMP trap that is generated when an alarm entry crosses its rising or falling threshold and generates an event that is configured for sending SNMP traps.
TRAP-TYPE    

cpqb52nnPortTxPktCongestionTrap 8
The SNMP trap that is generated when an alarm entry crosses its rising or falling threshold and generates an event that is configured for sending SNMP traps.
TRAP-TYPE    

cpqb52nnPortRxMemCongestionTrap 9
The SNMP trap that is generated when an alarm entry crosses its rising or falling threshold and generates an event that is configured for sending SNMP traps.
TRAP-TYPE