CTRON-SSR-L3-MIB

File: CTRON-SSR-L3-MIB.mib (23728 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
CTRON-SSR-SMI-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
IpAddress TEXTUAL-CONVENTION MODULE-COMPLIANCE
OBJECT-GROUP ssrMibs

Defined Types

SSRProtocols  
The protocol encapsulated by an IP Header as defined by IANA in ftp://ftp.isi.edu/in-notes/iana/assignments/protocol-numbers
TEXTUAL-CONVENTION    
  INTEGER hopopt(0), icmp(1), igmp(2), ggp(3), ipip(4), stream(5), tcp(6), cbt(7), egp(8), igp(9), bbnrccmon(10), nvpii(11), pup(12), argus(13), emcon(14), xnet(15), chaos(16), udp(17), mux(18), dcn(19), hmp(20), prm(21), xnsidp(22), trunk1(23), trunk2(24), leaf1(25), leaf2(26), rdp(27), irtp(28), isotp4(29), netblt(30), mfe(31), meritInp(32), sep(33), tpc(34), idpr(35), xtp(36), ddp(37), idprCmtp(38), tppp(39), il(40), ipv6(41), sdrp(42), ipv6r(43), ipv6f(44), idrp(45), rsvp(46), gre(47), mhrp(48), bna(49), esp(50), ah(51), inlsp(52), swipe(53), narp(54), mobile(55), tlsp(56), skip(57), ipv6Icmp(58), ipv6Nonxt(59), ipv6Opts(60), hostInternal(61), cftp(62), any(63), satExpak(64), kryptolan(65), rvd(66), ippc(67), adfs(68), satMon(69), visa(70), ipcv(71), cpnx(72), cphb(73), wsn(74), pvp(75), brSatMon(76), sunNd(77), wbMon(78), wbExpak(79), isoIp(80), vmtp(81), secureVmtp(82), vines(83), ttp(84), nsfnetIgp(85), dgp(86), tcf(87), eigrp(88), ospfigp(89), spriteRpc(90), larp(91), mtp(92), ax25(93), ipipep(94), micp(95), sccSp(96), etherip(97), encap(98), anyEncrpyt(99), gmtp(100), ifmp(101), pnni(102), pim(103), aris(104), scps(105), qnx(106), an(107), ippcp(108), snp(109), cpqP(110), ipxIp(111), vrrp(112), reserved(255)  

L3FlowEntry  
SEQUENCE    
  l3FlowIndex INTEGER
  l3FlowFilterId INTEGER
  l3FlowPortOfEntry INTEGER
  l3FlowSrcIpAddress IpAddress
  l3FlowDstIpAddress IpAddress
  l3FlowTOS INTEGER
  l3FlowProtocol SSRProtocols
  l3FlowSrcPort INTEGER
  l3FlowDstPort INTEGER
  l3FlowPkts Counter32
  l3FlowOctets Counter32

L3FlowPriorityEntry  
SEQUENCE    
  l3FlowPriorityIndex INTEGER
  l3FlowPriorityName OCTET STRING
  l3FlowPrioritySrcIpAddress IpAddress
  l3FlowPrioritySrcPort INTEGER
  l3FlowPriorityDstIpAddress IpAddress
  l3FlowPriorityDstPort INTEGER
  l3FlowPriorityTOS INTEGER
  l3FlowPriorityProtocol SSRProtocols
  l3FlowPriorityInterface OCTET STRING
  l3FlowPriority INTEGER

Defined Values

l3MIB 1.3.6.1.4.1.52.2501.1.600
This module defines a schema to access SSR Layer 3 processing subsystem. This mib is no longer supported on ssr platforms. features of this mib now exist in standard mibs. RMON I RFC 1757 provides Layer 3 information and ctron-ssr-policy mib to program filter tables.
MODULE-IDENTITY    

l3Group 1.3.6.1.4.1.52.2501.1.3
OBJECT IDENTIFIER    

l3FlowTable 1.3.6.1.4.1.52.2501.1.3.1
A list of L3 flow entries.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    L3FlowEntry

l3FlowEntry 1.3.6.1.4.1.52.2501.1.3.1.1
An entry containing the L3 flow information
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  L3FlowEntry  

l3FlowIndex 1.3.6.1.4.1.52.2501.1.3.1.1.1
A unique number for each flow. The encoding is as explained. bit 0-15 = Table Index (0-64K) bit 16-18 = Table Number (0-3) bit 19-31 = Channel Number (0-32)
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..4294967295  

l3FlowFilterId 1.3.6.1.4.1.52.2501.1.3.1.1.2
A filter byte to narrow the data returned by the agent. The number of possible flows can be extremely high. An SNMP walk could take a significatn resources. Using a walk with a filter will narrow the values returned to those flows matching the fields used in the index. Currently only the first byte of this Integer is used. This byte specifies one or more fields to compare flows in the system against the index in the get-next request. Big endian least significant Byte is encoding is as follows: bit 0 : unused bit 1 : Port Of Entry Filter mask bit 2 : Src IP Address Filter mask bit 3 : Dst IP Address Filter mask bit 4 : Type Of Service Filter mask bit 5 : Protocol Filter mask bit 6 : Src port Filter mask bit 7 : Dst port Filter mask A complete walk of the mib will use the filter value of 0 as will a get Request
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..254  

l3FlowPortOfEntry 1.3.6.1.4.1.52.2501.1.3.1.1.3
The physical port in the chassis/shelf from which this flow enters the switch.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..1024  

l3FlowSrcIpAddress 1.3.6.1.4.1.52.2501.1.3.1.1.4
The source IP address for this flow.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

l3FlowDstIpAddress 1.3.6.1.4.1.52.2501.1.3.1.1.5
The destination IP address for this flow.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

l3FlowTOS 1.3.6.1.4.1.52.2501.1.3.1.1.6
The Type Of Service for this flow.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

l3FlowProtocol 1.3.6.1.4.1.52.2501.1.3.1.1.7
The IP protocol for this flow. Official assignments are defined in ftp://ftp.isi.edu/in-notes/iana/assignments/protocol-numbers
Status: obsolete Access: read-only
OBJECT-TYPE    
  SSRProtocols  

l3FlowSrcPort 1.3.6.1.4.1.52.2501.1.3.1.1.8
The source UDP/TCP port for this flow. Official port numbers are defined in: ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

l3FlowDstPort 1.3.6.1.4.1.52.2501.1.3.1.1.9
The destination UDP/TCP port for this flow. Official port numbers are defined in ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

l3FlowPkts 1.3.6.1.4.1.52.2501.1.3.1.1.10
The packets in this flow.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

l3FlowOctets 1.3.6.1.4.1.52.2501.1.3.1.1.11
The number of octets in this flow.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

l3FlowPriorityTable 1.3.6.1.4.1.52.2501.1.3.2
A list of priorities for L3 flow entries.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    L3FlowPriorityEntry

l3FlowPriorityEntry 1.3.6.1.4.1.52.2501.1.3.2.1
An entry containing the L3 flow priority information
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  L3FlowPriorityEntry  

l3FlowPriorityIndex 1.3.6.1.4.1.52.2501.1.3.2.1.1
The unique entry number for this flow.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..4294967295  

l3FlowPriorityName 1.3.6.1.4.1.52.2501.1.3.2.1.2
A unique name for this flow. Padded with blanks to 20 bytes.
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

l3FlowPrioritySrcIpAddress 1.3.6.1.4.1.52.2501.1.3.2.1.3
The source IP address for this flow.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

l3FlowPrioritySrcPort 1.3.6.1.4.1.52.2501.1.3.2.1.4
The source UDP/TCP port for this flow. The Official port numbers are defined in: ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

l3FlowPriorityDstIpAddress 1.3.6.1.4.1.52.2501.1.3.2.1.5
The destination IP address for this flow.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

l3FlowPriorityDstPort 1.3.6.1.4.1.52.2501.1.3.2.1.6
The destination UDP/TCP port for this flow. Official port numbers are defined in ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

l3FlowPriorityTOS 1.3.6.1.4.1.52.2501.1.3.2.1.7
The Type Of Service for this flow.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

l3FlowPriorityProtocol 1.3.6.1.4.1.52.2501.1.3.2.1.8
The IP protocol for this flow. Official assignments are defined in ftp://ftp.isi.edu/in-notes/iana/assignments/protocol-numbers
Status: obsolete Access: read-write
OBJECT-TYPE    
  SSRProtocols  

l3FlowPriorityInterface 1.3.6.1.4.1.52.2501.1.3.2.1.9
The set of interfaces which are associated with this entry. Each octet within the value of this object specifies a set of eight interfaces, with the first octet specifying interfaces 1 through 8, the second octet specifying interfaces 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered interface, and the least significant bit represents the highest numbered interface. Thus, each interface of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that interface is included in the set of interfaces; the interface is not included if its bit has a value of '0'.
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

l3FlowPriority 1.3.6.1.4.1.52.2501.1.3.2.1.10
The priority for this flow.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), control(4)  

l3Conformance 1.3.6.1.4.1.52.2501.1.600.2
OBJECT IDENTIFIER    

l3Compliances 1.3.6.1.4.1.52.2501.1.600.2.1
OBJECT IDENTIFIER    

l3Groups 1.3.6.1.4.1.52.2501.1.600.2.2
OBJECT IDENTIFIER    

l3ComplianceV10 1.3.6.1.4.1.52.2501.1.600.2.2.1.1
The compliance statement for the SSR-L3-MIB.
Status: obsolete Access: read-write
MODULE-COMPLIANCE    

l3ConfGroupV10 1.3.6.1.4.1.52.2501.1.600.2.2.1
A set of managed objects that make up version 1.0 of the SSR Layer 3 MIB
Status: obsolete Access: read-write
OBJECT-GROUP