DASAN-ADSL-MIB

File: DASAN-ADSL-MIB.mib (120885 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
ADSL-LINE-MIB DASAN-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE OBJECT-IDENTITY
mib-2 IpAddress Integer32
Counter32 Gauge32 TimeTicks
Unsigned32 TEXTUAL-CONVENTION TimeStamp
TruthValue DisplayString RowStatus
ifIndex adslLineAlarmConfProfileName adslAtucChanIntervalNumber
adslAtucIntervalNumber adslLineConfProfileName adslAturChanIntervalNumber
dasanMgmt

Defined Types

DsAdslLineExtnEntry  
SEQUENCE    
  dsAdslLineExtnAction INTEGER
  dsAdslLineExtnUtopiaL2RxAddr INTEGER
  dsAdslLineExtnUtopiaL2TxAddr INTEGER
  dsAdslLineExtnTransAtucCap BITS
  dsAdslLineExtnTransAtucActual BITS
  dsAdslLineExtnClockType INTEGER
  dsAdslLineExtnLineDmtTrellis INTEGER

DsAdslAtucPhysExtnEntry  
SEQUENCE    
  dsAdslAtucPhysExtnOpState INTEGER
  dsAdslAtucPhysExtnActualStd INTEGER
  dsAdslAtucPhysExtnBertError INTEGER
  dsAdslAtucPhysExtnTxAtmCellCounter Counter32
  dsAdslAtucPhysExtnRxAtmCellCounter INTEGER
  dsAdslAtucPhysExtnStartProgress INTEGER
  dsAdslAtucPhysExtnIdleBertError INTEGER
  dsAdslAtucPhysExtnIdleBertCells INTEGER
  dsAdslAtucPhysExtnBertSync INTEGER
  dsAdslAtucPhysExtnParametricTestResult INTEGER
  dsAdslAtucPhysExtnDataBoostStatus INTEGER
  dsAdslAtucPhysExtnTestArray OCTET STRING
  dsAdslAtucPhysExtnChanPerfCD INTEGER
  dsAdslAtucPhysExtnChanPerfBE INTEGER
  dsAdslAtucPhysExtnDeltHLINSCus INTEGER
  dsAdslAtucPhysExtnDeltHLINpsus OCTET STRING
  dsAdslAtucPhysExtnDeltHLOGMTus INTEGER
  dsAdslAtucPhysExtnDeltHLOGpsus OCTET STRING
  dsAdslAtucPhysExtnDeltQLNMTus INTEGER
  dsAdslAtucPhysExtnDeltQLNpsus OCTET STRING
  dsAdslAtucPhysExtnDeltLastTxState INTEGER
  dsAdslAtucPhysExtnPMState INTEGER
  dsAdslAtucPhysExtnChanPerfCU INTEGER
  dsAdslAtucPhysExtnExtendedPsdStatus INTEGER
  dsAdslAtucPhysExtnChipVersion INTEGER
  dsAdslAtucPhysExtnPilotTone INTEGER
  dsAdslAtucMSGds Gauge32
  dsAdslAtucPhysExtnPsdMaskMode INTEGER

DsAdslAturPhysExtnEntry  
SEQUENCE    
  dsAdslAturPhysExtnConfig OCTET STRING
  dsAdslAturPhysExtnChanPerfCD INTEGER
  dsAdslAturPhysExtnChanPerfCU INTEGER
  dsAdslAturPhysExtnChanPerfBE INTEGER
  dsAdslAturPhysExtnDeltHLINSCds INTEGER
  dsAdslAturPhysExtnDeltHLINpsds OCTET STRING
  dsAdslAturPhysExtnDeltHLOGMTds INTEGER
  dsAdslAturPhysExtnDeltHLOGpsus OCTET STRING
  dsAdslAturPhysExtnDeltQLNMTds INTEGER
  dsAdslAturPhysExtnDeltQLNpsds OCTET STRING
  dsAdslAturPhysExtnDeltLastTxState INTEGER
  dsAdslAturMSGus Gauge32

DsAdslAtucChanExtnEntry  
SEQUENCE    
  dsAdslAtucChanExtnCurrAtmStatus INTEGER
  dsAdslAtucChanExtnRsSymbols INTEGER
  dsAdslAtucChanExtnRsDepth INTEGER
  dsAdslAtucChanExtnRsRedundancy INTEGER

DsAdslAturChanExtnEntry  
SEQUENCE    
  dsAdslAturChanExtnCurrAtmStatus INTEGER
  dsAdslAturChanExtnRsSymbols Unsigned32
  dsAdslAturChanExtnRsDepth Unsigned32
  dsAdslAturChanExtnRsRedundancy Unsigned32

DsAdslAtucPerfDataExtnEntry  
SEQUENCE    
  dsAdslAtucPerfDataExtnStatFastR Gauge32
  dsAdslAtucPerfDataExtnStatFailedFastR Gauge32
  dsAdslAtucPerfDataExtnStatSesL Gauge32
  dsAdslAtucPerfDataExtnStatUasL Gauge32
  dsAdslAtucPerfDataExtnCurr15MinFastR Gauge32
  dsAdslAtucPerfDataExtnCurr15MinFailedFastR Gauge32
  dsAdslAtucPerfDataExtnCurr15MinSesL Gauge32
  dsAdslAtucPerfDataExtnCurr15MinUasL Gauge32
  dsAdslAtucPerfDataExtnCurr1DayFastR Gauge32
  dsAdslAtucPerfDataExtnCurr1DayFailedFastR Gauge32
  dsAdslAtucPerfDataExtnCurr1DaySesL Gauge32
  dsAdslAtucPerfDataExtnCurr1DayUasL Gauge32
  dsAdslAtucPerfDataExtnPrev1DayFastR Gauge32
  dsAdslAtucPerfDataExtnPrev1DayFailedFastR Gauge32
  dsAdslAtucPerfDataExtnPrev1DaySesL Gauge32
  dsAdslAtucPerfDataExtnPrev1DayUasL Gauge32
  dsAdslAtucPerfDataExtnPrev1DayTimeElapsed Gauge32
  dsAdslAtucPerfDataExtnStatFecsL Gauge32
  dsAdslAtucPerfDataExtnCurr15MinFecsL Gauge32
  dsAdslAtucPerfDataExtnCurr1DayFecsL Gauge32
  dsAdslAtucPerfDataExtnPrev1DayFecsL Gauge32
  dsAdslAtucPerfDataExtnStatLossL Gauge32
  dsAdslAtucPerfDataExtnCurr15MinLossL Gauge32
  dsAdslAtucPerfDataExtnCurr1DayLossL Gauge32
  dsAdslAtucPerfDataExtnPrev1DayLossL Gauge32

DsAdslAturPerfDataExtnEntry  
SEQUENCE    
  dsAdslAturPerfDataExtnStatSesL Counter32
  dsAdslAturPerfDataExtnCurr15MinSesL Gauge32
  dsAdslAturPerfDataExtnCurr1DaySesL Gauge32
  dsAdslAturPerfDataExtnPrev1DaySesL Gauge32
  dsAdslAturPerfDataExtnStatUasL Counter32
  dsAdslAturPerfDataExtnCurr15MinUasL Gauge32
  dsAdslAturPerfDataExtnCurr1DayUasL Gauge32
  dsAdslAturPerfDataExtnPrev1DayUasL Gauge32
  dsAdslAturPerfDataExtnStatFecsL Counter32
  dsAdslAturPerfDataExtnCurr15MinFecsL Gauge32
  dsAdslAturPerfDataExtnCurr1DayFecsL Gauge32
  dsAdslAturPerfDataExtnPrev1DayFecsL Gauge32
  dsAdslAturPerfDataExtnStatLossL Counter32
  dsAdslAturPerfDataExtnCurr15MinLossL Gauge32
  dsAdslAturPerfDataExtnCurr1DayLossL Gauge32
  dsAdslAturPerfDataExtnPrev1DayLossL Gauge32

DsAdslAtucIntervalExtnEntry  
SEQUENCE    
  adslAtucIntervalNumber INTEGER
  dsAdslAtucIntervalExtnFastR Gauge32
  dsAdslAtucIntervalExtnFailedFastR Gauge32
  dsAdslAtucIntervalExtnSesL Gauge32
  dsAdslAtucIntervalExtnUasL Gauge32
  dsAdslAtucIntervalExtnTimeElapsed Gauge32

DsAdslAtucChanPerfDataExtnEntry  
SEQUENCE    
  dsAdslAtucChanPerfDataExtnTimeElapsed Gauge32
  dsAdslAtucChanPerfDataExtnNcd Gauge32
  dsAdslAtucChanPerfDataExtnOcd Gauge32
  dsAdslAtucChanPerfDataExtnHec Gauge32
  dsAdslAtucChanPerfDataExtnCurr15MinNcd Gauge32
  dsAdslAtucChanPerfDataExtnCurr15MinOcd Gauge32
  dsAdslAtucChanPerfDataExtnCurr15MinHec Gauge32
  dsAdslAtucChanPerfDataExtnCurr1DayNcd Gauge32
  dsAdslAtucChanPerfDataExtnCurr1DayOcd Gauge32
  dsAdslAtucChanPerfDataExtnCurr1DayHec Gauge32
  dsAdslAtucChanPerfDataExtnPrev1DayNcd Gauge32
  dsAdslAtucChanPerfDataExtnPrev1DayOcd Gauge32
  dsAdslAtucChanPerfDataExtnPrev1DayHec Gauge32

DsAdslAturChanPerfDataExtnEntry  
SEQUENCE    
  dsAdslAturChanPerfDataExtnNcd Gauge32
  dsAdslAturChanPerfDataExtnHec Gauge32
  dsAdslAturChanPerfDataExtnCurr15MinNcd Gauge32
  dsAdslAturChanPerfDataExtnCurr15MinHec Gauge32
  dsAdslAturChanPerfDataExtnCurr1DayNcd Gauge32
  dsAdslAturChanPerfDataExtnCurr1DayHec Gauge32
  dsAdslAturChanPerfDataExtnPrev1DayNcd Gauge32
  dsAdslAturChanPerfDataExtnPrev1DayHec Gauge32

DsAdslAtucChanIntervalExtnEntry  
SEQUENCE    
  dsAdslAtucChanIntervalExtnTimeElapsed Counter32
  dsAdslAtucChanIntervalExtnNcd Counter32
  dsAdslAtucChanIntervalExtnOcd Counter32
  dsAdslAtucChanIntervalExtnHec Counter32

DsAdslAturChanIntervalExtnEntry  
SEQUENCE    
  dsAdslAturChanIntervalExtnNcd Gauge32
  dsAdslAturChanIntervalExtnHec Gauge32

DsAdslLineConfProfileExtnEntry  
SEQUENCE    
  dsAdslLineConfProfileName OCTET STRING
  dsAdslLineConfProfileExtnRsIntCorrectionUp INTEGER
  dsAdslLineConfProfileExtnLineType INTEGER
  dsAdslLineConfProfileExtnTxEndBin INTEGER
  dsAdslLineConfProfileExtnTxStartBin INTEGER
  dsAdslLineConfProfileExtnRxStartBin INTEGER
  dsAdslLineConfProfileExtnRxEndBin INTEGER
  dsAdslLineConfProfileExtnRxBinAdjust INTEGER
  dsAdslLineConfProfileExtnStandard INTEGER
  dsAdslLineConfProfileExtnTxPowerAttenuation INTEGER
  dsAdslLineConfProfileExtnRsFastOvrhdDown INTEGER
  dsAdslLineConfProfileExtnIntCorrectionDown INTEGER
  dsAdslLineConfProfileExtnRsFastOvrhdUp INTEGER
  dsAdslLineConfProfileExtnAnnexType INTEGER
  dsAdslLineConfProfileExtnMaxDCo INTEGER
  dsAdslLineConfProfileExtnAdvertisedCapabilities INTEGER
  dsAdslLineConfProfileExtnPsdMaskType INTEGER
  dsAdslLineConfProfileExtnLineDmtConfMode INTEGER
  dsAdslLineConfProfileExtnUpstreamPSD INTEGER
  dsAdslLineConfProfileExtnPMMode BITS
  dsAdslLineConfProfileExtnPML0Time INTEGER
  dsAdslLineConfProfileExtnPML2Time INTEGER
  dsAdslLineConfProfileExtnPML2ATPR INTEGER
  dsAdslLineConfProfileExtnPML2Rate INTEGER
  dsAdslLineConfProfileExtnAtucConfMinINP INTEGER
  dsAdslLineConfProfileExtnPML2EntryThresholdRate INTEGER
  dsAdslLineConfProfileExtnPML2ExitThresholdRate INTEGER
  dsAdslLineConfProfileExtnPML2EntryRateMinTime INTEGER

DsAdslLineAlarmConfProfileExtnEntry  
SEQUENCE    
  dsAdslLineAlarmConfProfileName OCTET STRING
  dsAdslLineAlarmExtnAtucThresh15MinFailFastR INTEGER
  dsAdslLineAlarmExtnAtucThresh15MinSesL INTEGER
  dsAdslLineAlarmExtnAtucThresh15MinUasL INTEGER
  dsAdslLineAlarmExtnAtucOpStateTrapEnable INTEGER
  dsAdslLineAlarmExtnAtucThresh15MinFecsL Integer32
  dsAdslLineAlarmExtnAtucThresh1DayLofs Integer32
  dsAdslLineAlarmExtnAtucThresh1DayLoss Integer32
  dsAdslLineAlarmExtnAtucThresh1DayLols Integer32
  dsAdslLineAlarmExtnAtucThresh1DayLprs Integer32
  dsAdslLineAlarmExtnAtucThresh1DayESs Integer32
  dsAdslLineAlarmExtnAtucThresh1DaySesL Integer32
  dsAdslLineAlarmExtnAtucThresh1DayUasL Integer32
  dsAdslLineAlarmExtnAtucThresh1DayFecsL Integer32
  dsAdslLineAlarmExtnAturThresh15MinFecsL Integer32
  dsAdslLineAlarmExtnAturThresh1DayLofs Integer32
  dsAdslLineAlarmExtnAturThresh1DayLoss Integer32
  dsAdslLineAlarmExtnAturThresh1DayLprs Integer32
  dsAdslLineAlarmExtnAturThresh1DayESs Integer32
  dsAdslLineAlarmExtnAturThresh1DaySesL Integer32
  dsAdslLineAlarmExtnAturThresh1DayUasL Integer32
  dsAdslLineAlarmExtnAturThresh1DayFecsL Integer32
  dsAdslLineAlarmExtnAturThresh15MinSesL Integer32
  dsAdslLineAlarmExtnAturThresh15MinUasL Integer32
  dsAdslLineAlarmExtnAtucPmStateTrapEnable INTEGER

Defined Values

dasanAdslMIB 1.3.6.1.4.1.6296.9.5
The MIB module to describe ADSL product. The MIB module that provides objects that are proprietary and extension to ADSL- LINE-MIB. The MIB include extension to following Tables. 1.) adslLineTable 2.) adslAtucPhysTable 3.) adslAturPhysTable 4.) adslAtucChanTable 5.) adslAturChanTable 6.) adslAtucPerfDataTable --7.) adslAturPerfDataTable 8.) adslAtucIntervalTable --9.) adslAturIntervalTable 10.) adslAtucChanPerfDataTable 11.) adslAturChanPerfDataTable 12.) adslAtucChanIntervalTable 13.) adslAturChanIntervalTable 14.) adslLineConfProfileTable 15.) adslLineAlarmConfProfileTable The MIB also include a set of scalar(s) clubbed under the group 'dsAdslCapabilityGroup'.
MODULE-IDENTITY    

dasanAdslLineMIB 1.3.6.1.4.1.6296.9.5.1
OBJECT IDENTIFIER    

dasanAdslMIBObjects 1.3.6.1.4.1.6296.9.5.1.1
OBJECT IDENTIFIER    

dsDslSystemParamGroup 1.3.6.1.4.1.6296.9.5.1.1.1
OBJECT IDENTIFIER    

dsDslSystemDslType 1.3.6.1.4.1.6296.9.5.1.1.1.1
This object identifies the firmware to be downloaded.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER adsl(1), sdsl(2), shdsl(3)  

dsDslSystemLineCodingType 1.3.6.1.4.1.6296.9.5.1.1.1.2
This object indicates ADSL line code type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), dmt(2), cap(3), qam(4)  

dsDslSystemLineTxCfg 1.3.6.1.4.1.6296.9.5.1.1.1.3
This object indicates transmission capabilities with which the DSL system is configured.
Status: current Access: read-write
OBJECT-TYPE    
  BITS ansit1413(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921IsdnOverlapped(5), q9921TcmIsdnNonOverlapped(6), q9921TcmIsdnOverlapped(7), q9922PotsNonOverlapped(8), q9922PotsOverlapped(9), q9922TcmIsdnNonOverlapped(10), q9922TcmIsdnOverlapped(11), q9921TcmIsdnSymmetric(12)  

dsAdslCapabilityGroup 1.3.6.1.4.1.6296.9.5.1.1.2
OBJECT IDENTIFIER    

dsAdslCapabilityLineTxCap 1.3.6.1.4.1.6296.9.5.1.1.2.1
This bitmap specifies which all transmission modes, which the ATU-C is capable of supporting. Right now support for Annex A (q9921PotsNonOverlapped(2) and q9921PotsOverlapped(3)) is present. This value depends on the DSL PHY firmware present on Columbia MND
Status: current Access: read-only
OBJECT-TYPE    
  BITS ansit1413(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921IsdnOverlapped(5), q9921TcmIsdnNonOverlapped(6), q9921TcmIsdnOverlapped(7), q9922PotsNonOverlapped(8), q9922PotsOverlapped(9), q9922TcmIsdnNonOverlapped(10), q9922TcmIsdnOverlapped(11), q9921TcmIsdnSymmetric(12), adslPlusPotsNonOverlapped(13), q9921GspanPlusPotsNonOverlapped(31), q9921GspanPlusPotsOverlapped(30), q9923Adsl2PotsOverlapped(29), q9923Adsl2PotsNonOverlapped(28), q9925Adsl2PlusPotsOverlapped(27), q9925Adsl2PlusPotsNonOverlapped(26), q9923Readsl2PotsOverlapped(22), q9923Readsl2PotsNonOverlapped(23), adslPlusPotsOverlapped(18)  

dsAdslLineExtnTable 1.3.6.1.4.1.6296.9.5.1.1.3
This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. This Table is an extension to adslLineTable defined in rfc-2662.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DsAdslLineExtnEntry

dsAdslLineExtnEntry 1.3.6.1.4.1.6296.9.5.1.1.3.1
An entry (conceptual row) in the dsAdslLineExtnTable. The Table is indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  DsAdslLineExtnEntry  

dsAdslLineExtnAction 1.3.6.1.4.1.6296.9.5.1.1.3.1.1
this object indicates parameter that allows actions on a per line basis. These actions include abort, startup, and tests.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER startup(0), spectrumReverb(5), analogLb(6), digitalLb(7), atmLp(10), spectrumMedley(26), spectrumPilot(27), spectrumCMtpr(30), spectrumRMtpr(32), hybridLossTest(33), rcvLinearityTest(34), rcvFilterTest(35), rcvPowerPerBinTest(36), idleNoisePerBinTest(37), totalIdleNoiseTest(38), selt(4134), shutdown(101), wakeup(102)  

dsAdslLineExtnUtopiaL2RxAddr 1.3.6.1.4.1.6296.9.5.1.1.3.1.2
This object indicates UTOPIA Level 2 Rx address for a line.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

dsAdslLineExtnUtopiaL2TxAddr 1.3.6.1.4.1.6296.9.5.1.1.3.1.3
This object indicates UTOPIA Level 2 Tx address for a line.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

dsAdslLineExtnTransAtucCap 1.3.6.1.4.1.6296.9.5.1.1.3.1.4
The transmission modes that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment. REFERENCE Section 7.3.2 ITU G.997.1.
Status: current Access: read-only
OBJECT-TYPE    
  BITS ansit1413(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921isdnOverlapped(5), q9921tcmIsdnNonOverlapped(6), q9921tcmIsdnOverlapped(7), q9922potsNonOverlapeed(8), q9922potsOverlapped(9), q9922tcmIsdnNonOverlapped(10), q9922tcmIsdnOverlapped(11), q9921tcmIsdnSymmetric(12), adslPlusPotsNonOverlapped(13), q9921GspanPlusPotsNonOverlapped(31), q9921GspanPlusPotsOverlapped(30), vdslNonOverlapped(25), vdslOverlapped(24), q9923Adsl2PotsOverlapped(29), q9923Adsl2PotsNonOverlapped(28), q9925Adsl2PlusPotsOverlapped(27), q9925Adsl2PlusPotsNonOverlapped(26), q9923Readsl2PotsOverlapped(22), q9923Readsl2PotsNonOverlapped(23), adslPlusPotsOverlapped(18)  

dsAdslLineExtnTransAtucActual 1.3.6.1.4.1.6296.9.5.1.1.3.1.5
The transmission mode of the ATU-C. This object returns if there is no mode currently known. The initialization with the ATU-R will determine the mode used. REFERENCE Section 7.3.2 ITU G.997.1.
Status: current Access: read-only
OBJECT-TYPE    
  BITS ansit1413(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921isdnOverlapped(5), q9921tcmIsdnNonOverlapped(6), q9921tcmIsdnOverlapped(7), q9922potsNonOverlapeed(8), q9922potsOverlapped(9), q9922tcmIsdnNonOverlapped(10), q9922tcmIsdnOverlapped(11), q9921tcmIsdnSymmetric(12), adslPlusPotsNonOverlapped(13)  

dsAdslLineExtnClockType 1.3.6.1.4.1.6296.9.5.1.1.3.1.6
This object indicates parameter to set use of either crystal or oscillator.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER oscillator(0), crystal(4)  

dsAdslLineExtnLineDmtTrellis 1.3.6.1.4.1.6296.9.5.1.1.3.1.7
Parameter that indicates whether trellis coding has been enabled or disabled. Trellis coding should always be enabled for its clear performance advantage.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER trellisOn(1), trellisOff(2)  

dsAdslAtucPhysExtnTable 1.3.6.1.4.1.6296.9.5.1.1.4
This table provides one row for each ATUC. This table is an extention to adslAtucPhysTable defined in rfc-2662.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DsAdslAtucPhysExtnEntry

dsAdslAtucPhysExtnEntry 1.3.6.1.4.1.6296.9.5.1.1.4.1
An entry (conceptual row) in the dsAdslAtucPhysExtnTable. The Table is indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  DsAdslAtucPhysExtnEntry  

dsAdslAtucPhysExtnOpState 1.3.6.1.4.1.6296.9.5.1.1.4.1.1
This object indicates the operational state of the ATU. Values include idle,handshake, training, etc.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), data(1), handshake(16), training(24), llTest(128), dlTest(131), txTest(132), framerSync(26), fastRetrainInProg(27), bootupLoad(8), atmLpTest(133), discovery(46), deltTraining(139), delt(140)  

dsAdslAtucPhysExtnActualStd 1.3.6.1.4.1.6296.9.5.1.1.4.1.2
This object provides actual ATU-C configuration based on outcome of negotiation with ATU-R. In this case, the parameter provides actual standard used for the connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER t1413(0), gLite(1), gDmt(2), alctl14(3), multimode(4), adi(5), alctl(6), t1413auto(9), adslPlus(48), gspanPlus(64), adsl2(26), adsl2Plus(27), reAdsl2(28), adsl2Auto(29), adsl2PlusAuto(30)  

dsAdslAtucPhysExtnBertError 1.3.6.1.4.1.6296.9.5.1.1.4.1.3
This object indicates the No. of bit errors detected during BERT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAtucPhysExtnTxAtmCellCounter 1.3.6.1.4.1.6296.9.5.1.1.4.1.4
This object Provides transmit ATM cell counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dsAdslAtucPhysExtnRxAtmCellCounter 1.3.6.1.4.1.6296.9.5.1.1.4.1.5
This object Provides receive ATM cell counter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAtucPhysExtnStartProgress 1.3.6.1.4.1.6296.9.5.1.1.4.1.6
This object provides current detailed start up information to be used for debugging.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAtucPhysExtnIdleBertError 1.3.6.1.4.1.6296.9.5.1.1.4.1.7
Number of bit errors.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAtucPhysExtnIdleBertCells 1.3.6.1.4.1.6296.9.5.1.1.4.1.8
Number of idle cells.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAtucPhysExtnBertSync 1.3.6.1.4.1.6296.9.5.1.1.4.1.9
Indicates if the Signal is in Sync or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER bertOutOfSync(0), bertInSync(128)  

dsAdslAtucPhysExtnParametricTestResult 1.3.6.1.4.1.6296.9.5.1.1.4.1.10
Indicates the Result of the Parametric Test conducted on the Xcvr.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok(0), fail(1), dspIfFail(2)  

dsAdslAtucPhysExtnDataBoostStatus 1.3.6.1.4.1.6296.9.5.1.1.4.1.21
This object indicates whether DataBoost is utilized for the connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(32768), disabled(0)  

dsAdslAtucPhysExtnTestArray 1.3.6.1.4.1.6296.9.5.1.1.4.1.22
This object indicates the Parametric Test Array. Every Four octects refer to one element in this array of octets.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..42)  

dsAdslAtucPhysExtnChanPerfCD 1.3.6.1.4.1.6296.9.5.1.1.4.1.23
The near-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state. (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAtucPhysExtnChanPerfBE 1.3.6.1.4.1.6296.9.5.1.1.4.1.24
The near-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the near-end. (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAtucPhysExtnDeltHLINSCus 1.3.6.1.4.1.6296.9.5.1.1.4.1.25
DELT-related parameter that provides the scale factor to be applied to the upstream Hlin(f) values.(Not available for ADSL and ADSL2plus).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAtucPhysExtnDeltHLINpsus 1.3.6.1.4.1.6296.9.5.1.1.4.1.26
DELT-related parameter that provides an array of complex upstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..42)  

dsAdslAtucPhysExtnDeltHLOGMTus 1.3.6.1.4.1.6296.9.5.1.1.4.1.27
DELT-related parameter that provides the number of symbols used to measure the upstream Hlog(f).(Not available for ADSL and ADSL2plus).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAtucPhysExtnDeltHLOGpsus 1.3.6.1.4.1.6296.9.5.1.1.4.1.28
DELT-related parameter that provides an array of real upstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..42)  

dsAdslAtucPhysExtnDeltQLNMTus 1.3.6.1.4.1.6296.9.5.1.1.4.1.29
DELT-related parameter that provides the number of symbols used to measure the upstream QLN(f) values. (Not available for ADSL and ADSL2plus).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAtucPhysExtnDeltQLNpsus 1.3.6.1.4.1.6296.9.5.1.1.4.1.30
DELT-related parameter that provides an array of real upstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..42)  

dsAdslAtucPhysExtnDeltLastTxState 1.3.6.1.4.1.6296.9.5.1.1.4.1.31
DELT-related parameter that provides last successful transmitted initialization state by the ATU-C. (Not available for ADSL and ADSL2plus).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dmtatucg9941(0), dmtatucquiet1(1), dmtatuccomb1(2), dmtatucquiet2(3), dmtatuccomb2(4), dmtatucicomb1(5), dmtatuclineprob(6), dmtatucquiet3(7), dmtatuccomb3(8), dmtatucicomb2(9), dmtatucmsgfmt(10), dmtatucmsgpcb(11), dmtatucquiet4(12), dmtatucreverb1(13), dmtatuctref1(14), dmtatucreverb2(15), dmtatucect(16), dmtatucreverb3(17), dmtatuctref2(18), dmtatucreverb4(19), dmtatucsegue1(20), dmtatucmsg1(21), dmtatucreverb5(22), dmtatucsegue2(23), dmtatucmedley(24), dmtatucexchmarker(25), dmtatucmsg2(26), dmtatucreverb6(27), dmtatucsegue3(28), dmtatucparams(29), dmtatucreverb7(30), dmtatucsegue4(31), dmtatucshowtime(32)  

dsAdslAtucPhysExtnPMState 1.3.6.1.4.1.6296.9.5.1.1.4.1.32
Line Power Management State. (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idleop(0), dataop(1), l2op(141)  

dsAdslAtucPhysExtnChanPerfCU 1.3.6.1.4.1.6296.9.5.1.1.4.1.33
The near-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATU-R) interface. (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAtucPhysExtnExtendedPsdStatus 1.3.6.1.4.1.6296.9.5.1.1.4.1.34
GlobespanVirata parameter that indicates whether an extended or the standard upstream PSD is used - for G.Span Plus mode of operation only. Only supported for G.Span Plus, therefore this parameter is not valid for ADSL2/ADSL2plus modes of operation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER standard(0), jj100(1), extended(32768)  

dsAdslAtucPhysExtnChipVersion 1.3.6.1.4.1.6296.9.5.1.1.4.1.35
GlobespanVirata parameter that indicates the DSP version number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAtucPhysExtnPilotTone 1.3.6.1.4.1.6296.9.5.1.1.4.1.36
GlobespanVirata parameter that indicates the Pilot Tone Index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAtucMSGds 1.3.6.1.4.1.6296.9.5.1.1.4.1.37
Indicates the Overhead Channel. This feature is not supported by DSLPHY as yet.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPhysExtnPsdMaskMode 1.3.6.1.4.1.6296.9.5.1.1.4.1.38
GlobespanVirata parameter that indicates the actual Psd Mask currently being used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER adsl(0), hsadslM1(3), hsadslM2(4), msk2Rfi(32768), flatMskRfi(32771), cabMsk2Rfi(32772), coMsk2Rfi0(49152)  

dsAdslAturPhysExtnTable 1.3.6.1.4.1.6296.9.5.1.1.5
This table is an extention to adslAtucPhysTable defined in rfc-2662. This table provides one row for each ATUR. Each row contains the Physical Layer Parameters table for that ATUR.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DsAdslAturPhysExtnEntry

dsAdslAturPhysExtnEntry 1.3.6.1.4.1.6296.9.5.1.1.5.1
An entry (conceptual row) in the dsAdslAturPhysExtnTable. The Table is indexed by IfIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  DsAdslAturPhysExtnEntry  

dsAdslAturPhysExtnConfig 1.3.6.1.4.1.6296.9.5.1.1.5.1.1
This object provides the upstream and downstream ATU-R configuration data (EOC - read 5 sec after data mode).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

dsAdslAturPhysExtnChanPerfCD 1.3.6.1.4.1.6296.9.5.1.1.5.1.2
The far-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state.(Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAturPhysExtnChanPerfCU 1.3.6.1.4.1.6296.9.5.1.1.5.1.3
The far-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATUR) interface. (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAturPhysExtnChanPerfBE 1.3.6.1.4.1.6296.9.5.1.1.5.1.4
The far-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the far-end. (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAturPhysExtnDeltHLINSCds 1.3.6.1.4.1.6296.9.5.1.1.5.1.5
DELT-related parameter that provides the scale factor to be applied to the downstream Hlin(f) values.(Not available for ADSL and ADSL2plus).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAturPhysExtnDeltHLINpsds 1.3.6.1.4.1.6296.9.5.1.1.5.1.6
DELT-related parameter that provides an array of complex downstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octects refer to one element in this array of octets.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..42)  

dsAdslAturPhysExtnDeltHLOGMTds 1.3.6.1.4.1.6296.9.5.1.1.5.1.7
DELT-related parameter that provides the number of symbols used to measure the downstream Hlog(f). (Not available for ADSL and ADSL2plus).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAturPhysExtnDeltHLOGpsus 1.3.6.1.4.1.6296.9.5.1.1.5.1.8
DELT-related parameter that provides an array of real downstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..42)  

dsAdslAturPhysExtnDeltQLNMTds 1.3.6.1.4.1.6296.9.5.1.1.5.1.9
DELT-related parameter that provides the number of symbols used to measure the downstream QLN(f) values. (Not available for ADSL and ADSL2plus).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAturPhysExtnDeltQLNpsds 1.3.6.1.4.1.6296.9.5.1.1.5.1.10
DELT-related parameter that provides an array of real downstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octects refer to one element in this array of octets.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..42)  

dsAdslAturPhysExtnDeltLastTxState 1.3.6.1.4.1.6296.9.5.1.1.5.1.11
DELT-related parameter that provides last successful transmitted initialization state by the ATU-R. (Not available for ADSL and ADSL2plus).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dmtaturg9941(0), dmtaturquiet1(1), dmtaturcomb1(2), dmtaturquiet2(3), dmtaturcomb2(4), dmtaturicomb1(5), dmtaturlineprob(6), dmtaturquiet3(7), dmtaturcomb3(8), dmtaturicomb2(9), dmtaturmsgfmt(10), dmtaturmsgpcb(11), dmtaturreverb1(12), dmtaturquiet4(13), dmtaturreverb2(14), dmtaturquiet5(15), dmtaturreverb3(16), dmtaturect(17), dmtaturreverb4(18), dmtatursegue1(19), dmtaturreverb5(20), dmtatursegue2(21), dmtaturmsg1(22), dmtaturmedley(23), dmtaturexchmarker(24), dmtaturmsg2(25), dmtaturreverb6(26), dmtatursegue3(27), dmtaturparams(28), dmtaturreverb7(29), dmtatursegue4(30), dmtaturshowtime(31)  

dsAdslAturMSGus 1.3.6.1.4.1.6296.9.5.1.1.5.1.12
Indicates the Overhead Channel. This feature is not supported by DSLPHY as yet.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucChanExtnTable 1.3.6.1.4.1.6296.9.5.1.1.6
This table provides one row for each ATUC channel. This Table is an extention to adslAtucChanTable defined in rfc 2662.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DsAdslAtucChanExtnEntry

dsAdslAtucChanExtnEntry 1.3.6.1.4.1.6296.9.5.1.1.6.1
An entry (conceptual row) in the dsAdslAtucChanExtnTable. The Table is indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  DsAdslAtucChanExtnEntry  

dsAdslAtucChanExtnCurrAtmStatus 1.3.6.1.4.1.6296.9.5.1.1.6.1.1
indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be 'NoAtmDefect'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noAtmDefect(0), noCellDelineation(1), lossOfCellDelineation(2)  

dsAdslAtucChanExtnRsSymbols 1.3.6.1.4.1.6296.9.5.1.1.6.1.2
Indicates number of DMT symbols per Reed-Solomon code word (S) in the downstream direction. Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAtucChanExtnRsDepth 1.3.6.1.4.1.6296.9.5.1.1.6.1.3
Indicates interleaving depth (D) in the downstream direction. Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAtucChanExtnRsRedundancy 1.3.6.1.4.1.6296.9.5.1.1.6.1.4
Indicates number of redundant bytes (R) per Reed-Solomon code in the downstream direction.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dsAdslAturChanExtnTable 1.3.6.1.4.1.6296.9.5.1.1.7
This table is extention to adslAturChanTable defined in rfc-2662. This table provides one row for each ATUR channel. ADSL channel interfaces are those Interface Table entries where ifType is equal to adslInterleave(124) or adslFast(125).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DsAdslAturChanExtnEntry

dsAdslAturChanExtnEntry 1.3.6.1.4.1.6296.9.5.1.1.7.1
An entry (conceptual row) in the dsAdslAturChanExtnTable. The Table is indexed by IfIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  DsAdslAturChanExtnEntry  

dsAdslAturChanExtnCurrAtmStatus 1.3.6.1.4.1.6296.9.5.1.1.7.1.1
This object indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be NoAtmDefect.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noAtmDefect(0), noCellDelineation(1), lossOfCellDelineation(2)  

dsAdslAturChanExtnRsSymbols 1.3.6.1.4.1.6296.9.5.1.1.7.1.2
This object indicates number of DMT symbols per Reed- Solomon code word (S) in the upstream direction Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dsAdslAturChanExtnRsDepth 1.3.6.1.4.1.6296.9.5.1.1.7.1.3
This object indicates interleaving depth (D) in the upstream direction Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dsAdslAturChanExtnRsRedundancy 1.3.6.1.4.1.6296.9.5.1.1.7.1.4
This object indicates number of redundant bytes (R) per Reed-Solomon code in the upstream direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dsAdslAtucPerfDataExtnTable 1.3.6.1.4.1.6296.9.5.1.1.8
This table provides one row for each ATUC. This table is extention to adslAtucPerfDataTable defined in rfc-2662.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DsAdslAtucPerfDataExtnEntry

dsAdslAtucPerfDataExtnEntry 1.3.6.1.4.1.6296.9.5.1.1.8.1
An entry (conceptual row) in the dsAdslAtucPerfDataExtnTable. The Table is indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  DsAdslAtucPerfDataExtnEntry  

dsAdslAtucPerfDataExtnStatFastR 1.3.6.1.4.1.6296.9.5.1.1.8.1.1
The value of this object indicates the count of fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnStatFailedFastR 1.3.6.1.4.1.6296.9.5.1.1.8.1.2
The value of this object indicates the count of failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnStatSesL 1.3.6.1.4.1.6296.9.5.1.1.8.1.3
The value of this object indicates the count of severely errored second line. REFERENCE ITU G.997.1 Section 7.2.1.1.7
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnStatUasL 1.3.6.1.4.1.6296.9.5.1.1.8.1.4
The value of this object indicates the count of unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnCurr15MinFastR 1.3.6.1.4.1.6296.9.5.1.1.8.1.5
Count of seconds in the current 15 minute interval when there was fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnCurr15MinFailedFastR 1.3.6.1.4.1.6296.9.5.1.1.8.1.6
Count of seconds in the current 15 minute interval when there was failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnCurr15MinSesL 1.3.6.1.4.1.6296.9.5.1.1.8.1.7
Count of seconds in the current 15 minute interval when there was severely errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.7
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnCurr15MinUasL 1.3.6.1.4.1.6296.9.5.1.1.8.1.8
Count of seconds in the current 15 minute interval when there was count for unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnCurr1DayFastR 1.3.6.1.4.1.6296.9.5.1.1.8.1.9
Count of the number of seconds when there was fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed. REFERENCE ITU G.997.1 Section 7.4.15.1
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnCurr1DayFailedFastR 1.3.6.1.4.1.6296.9.5.1.1.8.1.10
Count of the number of seconds when there was failed fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed.REFERENCE ITU G.997.1 Section 7.4.15.2
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnCurr1DaySesL 1.3.6.1.4.1.6296.9.5.1.1.8.1.11
Count of the number of seconds when there was Severely Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.7
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnCurr1DayUasL 1.3.6.1.4.1.6296.9.5.1.1.8.1.12
Count of the number of seconds when there was Unavailable Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.9
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnPrev1DayFastR 1.3.6.1.4.1.6296.9.5.1.1.8.1.13
Count of seconds in the interval when there was fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.1
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnPrev1DayFailedFastR 1.3.6.1.4.1.6296.9.5.1.1.8.1.14
Count of seconds in the interval when there was failed fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.2
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnPrev1DaySesL 1.3.6.1.4.1.6296.9.5.1.1.8.1.15
Count of seconds in the interval when there was severely errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.7
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnPrev1DayUasL 1.3.6.1.4.1.6296.9.5.1.1.8.1.16
Count of seconds in the interval when there was unavailable errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.9
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnPrev1DayTimeElapsed 1.3.6.1.4.1.6296.9.5.1.1.8.1.17
Total elapsed seconds in this interval in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnStatFecsL 1.3.6.1.4.1.6296.9.5.1.1.8.1.18
Count of 1-second intervals with one or more forward error correction (FEC) anomalies since agent reset (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnCurr15MinFecsL 1.3.6.1.4.1.6296.9.5.1.1.8.1.19
Count of 1-second intervals, in the current 15 minute interval, with one or more forward error correction (FEC) anomalies (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnCurr1DayFecsL 1.3.6.1.4.1.6296.9.5.1.1.8.1.20
NCount of 1-second intervals, during the current day as measured by adslAtucPerfCurr1Day-TimeElapsed, with one or moreforward error correction (FEC) anomalies (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnPrev1DayFecsL 1.3.6.1.4.1.6296.9.5.1.1.8.1.21
Count of 1-second intervals, within the most recent previous 1-day period, with one or more forward error correction (FEC) anomalies (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnStatLossL 1.3.6.1.4.1.6296.9.5.1.1.8.1.22
Count of 1-second intervals containing one or more loss of signal (LOS) defects (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnCurr15MinLossL 1.3.6.1.4.1.6296.9.5.1.1.8.1.23
.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnCurr1DayLossL 1.3.6.1.4.1.6296.9.5.1.1.8.1.24
.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucPerfDataExtnPrev1DayLossL 1.3.6.1.4.1.6296.9.5.1.1.8.1.25
.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturPerfDataExtnTable 1.3.6.1.4.1.6296.9.5.1.1.9
This table provides one row for each ATU-R. ADSL physical interfaces are those Interface Table Entries where ifType is equal to adsl(94). This table is an extn to 'adslAturPerfDataExtTable' which is part of ADSL-LINE-EXT-MIB (rfc 3440).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DsAdslAturPerfDataExtnEntry

dsAdslAturPerfDataExtnEntry 1.3.6.1.4.1.6296.9.5.1.1.9.1
An entry (conceptual row) in the dsAdslAturPerfDataExtnTable. The Table is indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  DsAdslAturPerfDataExtnEntry  

dsAdslAturPerfDataExtnStatSesL 1.3.6.1.4.1.6296.9.5.1.1.9.1.1
.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dsAdslAturPerfDataExtnCurr15MinSesL 1.3.6.1.4.1.6296.9.5.1.1.9.1.2
.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturPerfDataExtnCurr1DaySesL 1.3.6.1.4.1.6296.9.5.1.1.9.1.3
.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturPerfDataExtnPrev1DaySesL 1.3.6.1.4.1.6296.9.5.1.1.9.1.4
.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturPerfDataExtnStatUasL 1.3.6.1.4.1.6296.9.5.1.1.9.1.5
.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dsAdslAturPerfDataExtnCurr15MinUasL 1.3.6.1.4.1.6296.9.5.1.1.9.1.6
.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturPerfDataExtnCurr1DayUasL 1.3.6.1.4.1.6296.9.5.1.1.9.1.7
.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturPerfDataExtnPrev1DayUasL 1.3.6.1.4.1.6296.9.5.1.1.9.1.8
.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturPerfDataExtnStatFecsL 1.3.6.1.4.1.6296.9.5.1.1.9.1.9
Count of 1-second intervals with one or more far end forward error correction (FFEC) anomalies since agent reset (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dsAdslAturPerfDataExtnCurr15MinFecsL 1.3.6.1.4.1.6296.9.5.1.1.9.1.10
Count of 1-second intervals containing one or more far end loss of signal (LOS) defects (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturPerfDataExtnCurr1DayFecsL 1.3.6.1.4.1.6296.9.5.1.1.9.1.11
Count of 1-second intervals, during the current day as measured by adslAturPerfCurr1Day-TimeElapsed, with one or more far end forward error correction (FFEC) anomalies (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturPerfDataExtnPrev1DayFecsL 1.3.6.1.4.1.6296.9.5.1.1.9.1.12
Count of 1-second intervals, within the most recent previous 1-day period, with one or more far end forward error correction (FFEC) anomalies (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturPerfDataExtnStatLossL 1.3.6.1.4.1.6296.9.5.1.1.9.1.13
Count of 1-second intervals containing one or more far end loss of signal (LOS) defects (Not available for ADSL).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dsAdslAturPerfDataExtnCurr15MinLossL 1.3.6.1.4.1.6296.9.5.1.1.9.1.14
.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturPerfDataExtnCurr1DayLossL 1.3.6.1.4.1.6296.9.5.1.1.9.1.15
.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturPerfDataExtnPrev1DayLossL 1.3.6.1.4.1.6296.9.5.1.1.9.1.16
.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucIntervalExtnTable 1.3.6.1.4.1.6296.9.5.1.1.10
This table provides one row for each ATUC performance data collection interval. This Table is an extention to adslAtucIntervalTable defined in rfc 2662.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DsAdslAtucIntervalExtnEntry

dsAdslAtucIntervalExtnEntry 1.3.6.1.4.1.6296.9.5.1.1.10.1
An entry (conceptual row) in the dsAdslAtucIntervalExtnTable. The Table is indexed by ifIndex and adslAtucIntervalNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  DsAdslAtucIntervalExtnEntry  

dsAdslAtucIntervalExtnFastR 1.3.6.1.4.1.6296.9.5.1.1.10.1.1
This variable indicates Count of seconds in the interval when there was Fast Retrains.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucIntervalExtnFailedFastR 1.3.6.1.4.1.6296.9.5.1.1.10.1.2
This variable indicates Count of seconds in the interval when there was Failed Fast Retrains.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucIntervalExtnSesL 1.3.6.1.4.1.6296.9.5.1.1.10.1.3
This variable indicates Count of seconds in the interval when there was severely errored seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucIntervalExtnUasL 1.3.6.1.4.1.6296.9.5.1.1.10.1.4
This variable indicates Count of seconds in the interval when there was unavailable errored seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucIntervalExtnTimeElapsed 1.3.6.1.4.1.6296.9.5.1.1.10.1.5
This variable indicates the total Elapsed time in this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucChanPerfDataExtnTable 1.3.6.1.4.1.6296.9.5.1.1.12
This table provides one row for each ATUC channel. This table is an extention to adslAtucChanPerfDataTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DsAdslAtucChanPerfDataExtnEntry

dsAdslAtucChanPerfDataExtnEntry 1.3.6.1.4.1.6296.9.5.1.1.12.1
An entry (conceptual row) in the dsAdslAtucChanPerfDataExtnTable. The Table is indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  DsAdslAtucChanPerfDataExtnEntry  

dsAdslAtucChanPerfDataExtnTimeElapsed 1.3.6.1.4.1.6296.9.5.1.1.12.1.1
Total elapsed seconds in this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucChanPerfDataExtnNcd 1.3.6.1.4.1.6296.9.5.1.1.12.1.2
Count of no cell delineation(ncd) on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucChanPerfDataExtnOcd 1.3.6.1.4.1.6296.9.5.1.1.12.1.3
Count of out of cell delineation (ocd) on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucChanPerfDataExtnHec 1.3.6.1.4.1.6296.9.5.1.1.12.1.4
Header error check counter(hec) on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucChanPerfDataExtnCurr15MinNcd 1.3.6.1.4.1.6296.9.5.1.1.12.1.5
Count of no cell delineation(ncd) on this channel within the current 15 minute time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucChanPerfDataExtnCurr15MinOcd 1.3.6.1.4.1.6296.9.5.1.1.12.1.6
Count of out of cell delineation (ocd) on this channel within the current 15 minute time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucChanPerfDataExtnCurr15MinHec 1.3.6.1.4.1.6296.9.5.1.1.12.1.7
Header error check counter(hec) on this channel within the current 15 minute time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucChanPerfDataExtnCurr1DayNcd 1.3.6.1.4.1.6296.9.5.1.1.12.1.8
Count of no cell delineation (ncd) on this channel within the current 1 day time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucChanPerfDataExtnCurr1DayOcd 1.3.6.1.4.1.6296.9.5.1.1.12.1.9
Count of out of cell delineation (ocd) on this channel within the current 1 day time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucChanPerfDataExtnCurr1DayHec 1.3.6.1.4.1.6296.9.5.1.1.12.1.10
Header error check counter (hec) on this channel within the current 1 day time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucChanPerfDataExtnPrev1DayNcd 1.3.6.1.4.1.6296.9.5.1.1.12.1.11
Count of no cell delineation (ncd) on this channel within the most recent previous 1-day period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucChanPerfDataExtnPrev1DayOcd 1.3.6.1.4.1.6296.9.5.1.1.12.1.12
Count of out of cell delineation (ocd) on this channel within the most recent previous 1-day period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucChanPerfDataExtnPrev1DayHec 1.3.6.1.4.1.6296.9.5.1.1.12.1.13
Header error check counter(hec) on this channel within the most recent previous 1-day period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturChanPerfDataExtnTable 1.3.6.1.4.1.6296.9.5.1.1.13
This table is extention to adslAturChanPerfDataTable defined in rfc-2662. This table contains the Performance Data for that ATU-R channel (fast or interleaved).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DsAdslAturChanPerfDataExtnEntry

dsAdslAturChanPerfDataExtnEntry 1.3.6.1.4.1.6296.9.5.1.1.13.1
An entry (conceptual row) in the dsAdslAturChanPerfDataExtnTable. The Table is indexed by IfIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  DsAdslAturChanPerfDataExtnEntry  

dsAdslAturChanPerfDataExtnNcd 1.3.6.1.4.1.6296.9.5.1.1.13.1.1
Number of packets with no cell delineation(NCD) error on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturChanPerfDataExtnHec 1.3.6.1.4.1.6296.9.5.1.1.13.1.2
Number of packets with Header error check (HEC) error on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturChanPerfDataExtnCurr15MinNcd 1.3.6.1.4.1.6296.9.5.1.1.13.1.3
Number of packets with no cell delineation(NCD) error on this channel within the current 15 minute time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturChanPerfDataExtnCurr15MinHec 1.3.6.1.4.1.6296.9.5.1.1.13.1.4
Number of packets with Header error check (HEC) error on this channel within the current 15 minute time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturChanPerfDataExtnCurr1DayNcd 1.3.6.1.4.1.6296.9.5.1.1.13.1.5
Number of packets with no cell delineation (NCD) error on this channel within the current 1 day time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturChanPerfDataExtnCurr1DayHec 1.3.6.1.4.1.6296.9.5.1.1.13.1.6
Number of packets with Header error check (HEC) error on this channel within the current 1 day time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturChanPerfDataExtnPrev1DayNcd 1.3.6.1.4.1.6296.9.5.1.1.13.1.7
Number of packets with no cell delineation (NCD) error on this channel within the most recent previous period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturChanPerfDataExtnPrev1DayHec 1.3.6.1.4.1.6296.9.5.1.1.13.1.8
Number of packets with Header error check (HEC) error on this channel within the most recent previous period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAtucChanIntervalExtnTable 1.3.6.1.4.1.6296.9.5.1.1.14
This table provides a row for each ATUC channel's performance data collection interval. This table is an extension to adslAtucChanIntervalTable defined in rfc 2662.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DsAdslAtucChanIntervalExtnEntry

dsAdslAtucChanIntervalExtnEntry 1.3.6.1.4.1.6296.9.5.1.1.14.1
An entry (conceptual row) in the dsAdslAtucChanIntervalExtnTable. The Table is indexed by ifIndex and adslAtucChanIntervalNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  DsAdslAtucChanIntervalExtnEntry  

dsAdslAtucChanIntervalExtnTimeElapsed 1.3.6.1.4.1.6296.9.5.1.1.14.1.1
Total time elapsed (in seconds) in this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dsAdslAtucChanIntervalExtnNcd 1.3.6.1.4.1.6296.9.5.1.1.14.1.2
Indicates count of no cell delineation on this channel for this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dsAdslAtucChanIntervalExtnOcd 1.3.6.1.4.1.6296.9.5.1.1.14.1.3
Indicates count of out cell delineation on this channel for this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dsAdslAtucChanIntervalExtnHec 1.3.6.1.4.1.6296.9.5.1.1.14.1.4
Indicates Header error check counter on this channel during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dsAdslAturChanIntervalExtnTable 1.3.6.1.4.1.6296.9.5.1.1.15
This table is extention to adslAturChanIntervalTable defined in rfc-2662. This table provides one row for each ATUR channel's performance data collection interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DsAdslAturChanIntervalExtnEntry

dsAdslAturChanIntervalExtnEntry 1.3.6.1.4.1.6296.9.5.1.1.15.1
An entry (conceptual row) in the dsAdslAturChanIntervalExtnTable. The Table is indexed by IfIndex and dsAdslAturChanIntervalExtnNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  DsAdslAturChanIntervalExtnEntry  

dsAdslAturChanIntervalExtnNcd 1.3.6.1.4.1.6296.9.5.1.1.15.1.1
Indicates count of no cell delineation on this channel for this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslAturChanIntervalExtnHec 1.3.6.1.4.1.6296.9.5.1.1.15.1.2
Indicates Header error check counter on this channel during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dsAdslLineConfProfileExtnTable 1.3.6.1.4.1.6296.9.5.1.1.16
This table contains information on the ADSL line configuration. This Table is an extension to adslLineConfProfileTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DsAdslLineConfProfileExtnEntry

dsAdslLineConfProfileExtnEntry 1.3.6.1.4.1.6296.9.5.1.1.16.1
An entry (conceptual row) in the dsAdslLineConfProfileExtnTable. The Table is indexed by adslLineConfProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  DsAdslLineConfProfileExtnEntry  

dsAdslLineConfProfileName 1.3.6.1.4.1.6296.9.5.1.1.16.1.1
This object is used by the line configuration table in order to identify a row of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

dsAdslLineConfProfileExtnRsIntCorrectionUp 1.3.6.1.4.1.6296.9.5.1.1.16.1.3
Sets the correction time for the upstream-interleaved buffer. RS can also be disabled. The Default Value for ADSL+ is 3.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dsAdslLineConfProfileExtnTable125us(3), dsAdslLineConfProfileExtnTable250us(4), dsAdslLineConfProfileExtnTable500us(5), dsAdslLineConfProfileExtnTable1ms(6), dsAdslLineConfProfileExtnTable2ms(7), dsAdslLineConfProfileExtnTable4ms(8), disable(15)  

dsAdslLineConfProfileExtnLineType 1.3.6.1.4.1.6296.9.5.1.1.16.1.4
This object is used to configure the ADSL physical line mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noChannel(1), fastOnly(2), interleavedOnly(3), fastOrInterleaved(4), fastAndInterleaved(5)  

dsAdslLineConfProfileExtnTxEndBin 1.3.6.1.4.1.6296.9.5.1.1.16.1.5
Highest bin number allowed for Tx signal. The Range & default for ADSL+ is 0x06 - 0x1ff and 0x1ff respectively.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 6..511  

dsAdslLineConfProfileExtnTxStartBin 1.3.6.1.4.1.6296.9.5.1.1.16.1.6
Lowest bin number allowed for Tx signal.The Range for ADSL+ is 0x06 - 0x1ff. The Default for Annex B is 0x40 respectively.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 6..511  

dsAdslLineConfProfileExtnRxStartBin 1.3.6.1.4.1.6296.9.5.1.1.16.1.8
Lowest bin number allowed for Rx signal. The Range for ADSL+ is 0x01 - 0x1ff. The default for Annex B is 0x01.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..511  

dsAdslLineConfProfileExtnRxEndBin 1.3.6.1.4.1.6296.9.5.1.1.16.1.9
Highest bin number allowed for Rx signal. The Range and default value for ADSL+ is 0x01 - 0x1ff and 0x1d respectively.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 6..511  

dsAdslLineConfProfileExtnRxBinAdjust 1.3.6.1.4.1.6296.9.5.1.1.16.1.10
Employs Rx Start/End bin settings.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0)  

dsAdslLineConfProfileExtnStandard 1.3.6.1.4.1.6296.9.5.1.1.16.1.13
Preferred standard compliance. Outcome is dependent upon standard support of the remote unit.GlobespanVirata High Speed ADSL DMT (ADSL+) applications only.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER t1413(0), gLite(1), gDmt(2), alctl14(3), multimode(4), adi(5), alctl(6), t1413Auto(9), adslPlus(48), gspanPlus(49), adsl2(26), adsl2Plus(27), readsl2(28), adsl2Auto(29), adsl2PlusAuto(30)  

dsAdslLineConfProfileExtnTxPowerAttenuation 1.3.6.1.4.1.6296.9.5.1.1.16.1.15
Specifies value of Tx power attenuation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dsAdslLineConfProfileExtnTable0(0), point1(13), point2(14), point3(15), point4(16), point5(17), point6(18), point7(19), point8(20), point9(21), dsAdslLineConfProfileExtnTable1(1), dsAdslLineConfProfileExtnTable2(2), dsAdslLineConfProfileExtnTable3(3), dsAdslLineConfProfileExtnTable4(4), dsAdslLineConfProfileExtnTable5(5), dsAdslLineConfProfileExtnTable6(6), dsAdslLineConfProfileExtnTable7(7), dsAdslLineConfProfileExtnTable8(8), dsAdslLineConfProfileExtnTable9(9), dsAdslLineConfProfileExtnTable10(10), dsAdslLineConfProfileExtnTable11(11), dsAdslLineConfProfileExtnTable12(12), dsAdslLineConfProfileExtnTable13(32781), dsAdslLineConfProfileExtnTable14(32782), dsAdslLineConfProfileExtnTable15(32783), dsAdslLineConfProfileExtnTable16(32784), dsAdslLineConfProfileExtnTable17(32785), dsAdslLineConfProfileExtnTable18(32786), dsAdslLineConfProfileExtnTable19(32787), dsAdslLineConfProfileExtnTable20(32788), dsAdslLineConfProfileExtnTable21(32789), dsAdslLineConfProfileExtnTable22(32790), dsAdslLineConfProfileExtnTable23(32791), dsAdslLineConfProfileExtnTable24(32792), dsAdslLineConfProfileExtnTable25(32793), dsAdslLineConfProfileExtnTable26(32794), dsAdslLineConfProfileExtnTable27(32795), dsAdslLineConfProfileExtnTable28(32796), dsAdslLineConfProfileExtnTable29(32797), dsAdslLineConfProfileExtnTable30(32798), dsAdslLineConfProfileExtnTable31(32799), dsAdslLineConfProfileExtnTable32(32800), dsAdslLineConfProfileExtnTable33(32801), dsAdslLineConfProfileExtnTable34(32802), dsAdslLineConfProfileExtnTable35(32803), dsAdslLineConfProfileExtnTable36(32804), dsAdslLineConfProfileExtnTable37(32805), dsAdslLineConfProfileExtnTable38(32806), dsAdslLineConfProfileExtnTable39(32807), dsAdslLineConfProfileExtnTable40(32808)  

dsAdslLineConfProfileExtnRsFastOvrhdDown 1.3.6.1.4.1.6296.9.5.1.1.16.1.17
Sets the percentage overhead for the downstream-fast buffer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dsAdslLineConfProfileExtnTable50(1), dsAdslLineConfProfileExtnTable25(2), dsAdslLineConfProfileExtnTable12(3), dsAdslLineConfProfileExtnTable6(4), dsAdslLineConfProfileExtnTable3(5), dsAdslLineConfProfileExtnTable1(7), disable(15)  

dsAdslLineConfProfileExtnIntCorrectionDown 1.3.6.1.4.1.6296.9.5.1.1.16.1.18
This parameter sets the correction time for the downstream interleaved buffer.RS can also be disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dsAdslLineConfProfileExtnTable125Us(3), dsAdslLineConfProfileExtnTable250Us(4), dsAdslLineConfProfileExtnTable500Us(5), dsAdslLineConfProfileExtnTable1Ms(6), dsAdslLineConfProfileExtnTable2Ms(7), dsAdslLineConfProfileExtnTable4Ms(8), disable(15)  

dsAdslLineConfProfileExtnRsFastOvrhdUp 1.3.6.1.4.1.6296.9.5.1.1.16.1.19
Sets the 4576014verhead for the upstream-fast buffer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dsAdslLineConfProfileExtnTable50(1), dsAdslLineConfProfileExtnTable25(2), dsAdslLineConfProfileExtnTable12(3), dsAdslLineConfProfileExtnTable6(4), dsAdslLineConfProfileExtnTable3(5), dsAdslLineConfProfileExtnTable1(7), disable(15)  

dsAdslLineConfProfileExtnAnnexType 1.3.6.1.4.1.6296.9.5.1.1.16.1.26
This parameter is set as per annex compliance of the code release. GlobespanVirata High Speed ADSL DMT (ADSL+) applications only.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER annexA(0), annexB(1), highSpeed(2), annexADSL2(5)  

dsAdslLineConfProfileExtnMaxDCo 1.3.6.1.4.1.6296.9.5.1.1.16.1.30
This object is used to indicate Maximum interleaving depth supported by the customer's hardware.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dsAdslLineConfProfileExtnTable64(0), dsAdslLineConfProfileExtnTable128(4096), dsAdslLineConfProfileExtnTable256(8192)  

dsAdslLineConfProfileExtnAdvertisedCapabilities 1.3.6.1.4.1.6296.9.5.1.1.16.1.32
Controls if the CO will attempt to startup using alternate standards if the CPE does not support ADSL+.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), annexa(1), annexb(2), adslplus(16)  

dsAdslLineConfProfileExtnPsdMaskType 1.3.6.1.4.1.6296.9.5.1.1.16.1.33
Selects the PSD mask option to be used.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER adsl(0), hsadslM1(3), hsadslM2(4), msk2Rfi(32768), flatMskRfi(32771), cabMsk2Rfi(32772), coMsk2Rfio(49152), adsl2NonovlpM1(275), adls2NonovlpM2(291), adls2NonovlpFlat(259)  

dsAdslLineConfProfileExtnLineDmtConfMode 1.3.6.1.4.1.6296.9.5.1.1.16.1.34
Selects if there is overlap or no overlap of bins.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ecMode(1), fdmMode(2)  

dsAdslLineConfProfileExtnUpstreamPSD 1.3.6.1.4.1.6296.9.5.1.1.16.1.41
This object sets the upstream PSD to be either extended or standard. Used for GSpan Plus only.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER extended(32768), standard(0), jj100(1)  

dsAdslLineConfProfileExtnPMMode 1.3.6.1.4.1.6296.9.5.1.1.16.1.42
PM-related parameter used by the ATU-C to set the allowed link states.
Status: current Access: read-write
OBJECT-TYPE    
  BITS pmstatel3enable(0), pmstatel2enable(1)  

dsAdslLineConfProfileExtnPML0Time 1.3.6.1.4.1.6296.9.5.1.1.16.1.43
PM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an exit from the L2 state and the next entry into the L2 state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dsAdslLineConfProfileExtnPML2Time 1.3.6.1.4.1.6296.9.5.1.1.16.1.44
PM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dsAdslLineConfProfileExtnPML2ATPR 1.3.6.1.4.1.6296.9.5.1.1.16.1.45
PM configuration parameter, related to the L2 low power state. This parameter represents the maximum aggregate transmit power reduction (in dB) that can be performed through a single Power Trim in the L2 state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

dsAdslLineConfProfileExtnPML2Rate 1.3.6.1.4.1.6296.9.5.1.1.16.1.46
PM configuration parameter, related to the L2 low power state. This parameter specifies the minimum net data rate during the low power state (L2). The data rate is coded in bit/s.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 256000..1024000  

dsAdslLineConfProfileExtnAtucConfMinINP 1.3.6.1.4.1.6296.9.5.1.1.16.1.63
Parameter used to specify the minimum impulse noise protection for the downstream bearer channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..400  

dsAdslLineConfProfileExtnPML2EntryThresholdRate 1.3.6.1.4.1.6296.9.5.1.1.16.1.64
PM configuration parameter, related to the L2 low power state. This parameter specifies the downstream data rate threshold that triggers autonomous entry into low power state (L2). The data rate is coded in bit/s, and must be less than or equal to the value of GSMIB_adslAtucConfGsPML2Exit ThresholdRate.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 256000..1024000  

dsAdslLineConfProfileExtnPML2ExitThresholdRate 1.3.6.1.4.1.6296.9.5.1.1.16.1.65
PM configuration parameter, related to the L2 low power state. This parameter specifies the downstream data rate threshold that triggers autonomous exit from low power state (L2). The data rate is coded in bit/s, and must be less than the value of GSMIB_adslAtucConfPML2MinRate.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 256000..1024000  

dsAdslLineConfProfileExtnPML2EntryRateMinTime 1.3.6.1.4.1.6296.9.5.1.1.16.1.66
PM configuration parameter, related to the L2 low power state. This parameter specifies the minimum interval of time that the net data rate for the bearer channel should stay below GSMIB_adslAtucConfGsPML2EntryThresholdRate before autonomous entry into low power state (L2). The minimum entry rate time is coded in seconds, and can range from 900 to 65535.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 900..65535  

dsAdslLineAlarmConfProfileExtnTable 1.3.6.1.4.1.6296.9.5.1.1.17
This table contains information on the ADSL line configuration. This table is an extention to adslLineAlarmConfProfileExtnTable defined in rfc 2662.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DsAdslLineAlarmConfProfileExtnEntry

dsAdslLineAlarmConfProfileExtnEntry 1.3.6.1.4.1.6296.9.5.1.1.17.1
An entry (conceptual row) in the dsAdslLineAlarmConfProfileExtnTable. The Table is indexed by adslLineAlarmConfProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  DsAdslLineAlarmConfProfileExtnEntry  

dsAdslLineAlarmConfProfileName 1.3.6.1.4.1.6296.9.5.1.1.17.1.1
This object is used by the line alarm configuration Extn table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always provide a default profile whose name is `DEND
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

dsAdslLineAlarmExtnAtucThresh15MinFailFastR 1.3.6.1.4.1.6296.9.5.1.1.17.1.2
The number of failed retrains encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agent to send an adslAtucFailedFastRTrap.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..900  

dsAdslLineAlarmExtnAtucThresh15MinSesL 1.3.6.1.4.1.6296.9.5.1.1.17.1.3
The number of Severe errored seconds encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP to send an adslAtucSesLTrap.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..900  

dsAdslLineAlarmExtnAtucThresh15MinUasL 1.3.6.1.4.1.6296.9.5.1.1.17.1.4
The first time the value of the corresponding instance of adslAtucPerf15MinUasL reaches or exceeds this value within a given 15-minute performance data collection period, an adslAtucUasLThreshTrap notifications will be generated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..900  

dsAdslLineAlarmExtnAtucOpStateTrapEnable 1.3.6.1.4.1.6296.9.5.1.1.17.1.5
Enables and disables the OpStateChangeTrap.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

dsAdslLineAlarmExtnAtucThresh15MinFecsL 1.3.6.1.4.1.6296.9.5.1.1.17.1.6
The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..900  

dsAdslLineAlarmExtnAtucThresh1DayLofs 1.3.6.1.4.1.6296.9.5.1.1.17.1.7
The number of Loss of Frame Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLofsThresh1DayTrap'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

dsAdslLineAlarmExtnAtucThresh1DayLoss 1.3.6.1.4.1.6296.9.5.1.1.17.1.8
The number of Loss of Signal Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLossThresh1DayTrap'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

dsAdslLineAlarmExtnAtucThresh1DayLols 1.3.6.1.4.1.6296.9.5.1.1.17.1.9
The number of Loss of Link Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLolsThresh1DayTrap'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

dsAdslLineAlarmExtnAtucThresh1DayLprs 1.3.6.1.4.1.6296.9.5.1.1.17.1.10
The number of Loss of Power Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLprsThresh1DayTrap'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

dsAdslLineAlarmExtnAtucThresh1DayESs 1.3.6.1.4.1.6296.9.5.1.1.17.1.11
The number of Errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfESsThresh1DayTrap'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

dsAdslLineAlarmExtnAtucThresh1DaySesL 1.3.6.1.4.1.6296.9.5.1.1.17.1.12
The number of Severe errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfSesLThresh1DayTrap'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

dsAdslLineAlarmExtnAtucThresh1DayUasL 1.3.6.1.4.1.6296.9.5.1.1.17.1.13
The number of unavailable errored seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an 'dsAdslAtucPerfUasLThresh1DayTrap'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

dsAdslLineAlarmExtnAtucThresh1DayFecsL 1.3.6.1.4.1.6296.9.5.1.1.17.1.14
The number of Forward error correction seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh1Day'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

dsAdslLineAlarmExtnAturThresh15MinFecsL 1.3.6.1.4.1.6296.9.5.1.1.17.1.15
The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAturTrapsPerfFecsLThresh'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..900  

dsAdslLineAlarmExtnAturThresh1DayLofs 1.3.6.1.4.1.6296.9.5.1.1.17.1.16
The number of Loss of Frame Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLofsThresh1DayTrap'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

dsAdslLineAlarmExtnAturThresh1DayLoss 1.3.6.1.4.1.6296.9.5.1.1.17.1.17
The number of Loss of Signal Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLossThresh1DayTrap'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

dsAdslLineAlarmExtnAturThresh1DayLprs 1.3.6.1.4.1.6296.9.5.1.1.17.1.18
The number of Loss of Power Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLprsThresh1DayTrap'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

dsAdslLineAlarmExtnAturThresh1DayESs 1.3.6.1.4.1.6296.9.5.1.1.17.1.19
The number of Errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfESsThresh1DayTrap'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

dsAdslLineAlarmExtnAturThresh1DaySesL 1.3.6.1.4.1.6296.9.5.1.1.17.1.20
The number of Severe errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfSesLThresh1DayTrap'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

dsAdslLineAlarmExtnAturThresh1DayUasL 1.3.6.1.4.1.6296.9.5.1.1.17.1.21
The number of unavailable errored seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an 'dsAdslAturPerfUasLThresh1DayTrap'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

dsAdslLineAlarmExtnAturThresh1DayFecsL 1.3.6.1.4.1.6296.9.5.1.1.17.1.22
The number of Forward error correction seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an ' dsAdslAturTrapsPerfFecsLThresh1Day'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

dsAdslLineAlarmExtnAturThresh15MinSesL 1.3.6.1.4.1.6296.9.5.1.1.17.1.23
The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..900  

dsAdslLineAlarmExtnAturThresh15MinUasL 1.3.6.1.4.1.6296.9.5.1.1.17.1.24
The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..900  

dsAdslLineAlarmExtnAtucPmStateTrapEnable 1.3.6.1.4.1.6296.9.5.1.1.17.1.25
Enables and disables the PmStateChangeTrap.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

dsAdslTrap 1.3.6.1.4.1.6296.9.5.1.2
OBJECT IDENTIFIER    

dsAdslAtucTraps 1.3.6.1.4.1.6296.9.5.1.2.1
OBJECT IDENTIFIER    

dsAdslAtucOpStateChangeTrap 1.3.6.1.4.1.6296.9.5.1.2.1.1
Operational state of the transceiver is changed
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAtucPmStateChangeTrap 1.3.6.1.4.1.6296.9.5.1.2.1.2
Current PM state of the transceiver is changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAtucPerfFailedFastRThreshTrap 1.3.6.1.4.1.6296.9.5.1.2.1.3
Failed retrains 15-minute interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAtucPerfSesLThreshTrap 1.3.6.1.4.1.6296.9.5.1.2.1.4
Severely Errored Seconds 15-minute interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAtucPerfUasLThreshTrap 1.3.6.1.4.1.6296.9.5.1.2.1.5
Unavailable Errored Seconds 15-minute interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAtucPerfFecsLThreshTrap 1.3.6.1.4.1.6296.9.5.1.2.1.6
Forward error correction 15-minute interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAtucPerfLofsThresh1DayTrap 1.3.6.1.4.1.6296.9.5.1.2.1.7
Loss of Frames 1-day interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAtucPerfLossThresh1DayTrap 1.3.6.1.4.1.6296.9.5.1.2.1.8
Loss of Signal 1-day interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAtucPerfLolsThresh1DayTrap 1.3.6.1.4.1.6296.9.5.1.2.1.9
Loss of Link 1-day interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAtucPerfLprsThresh1DayTrap 1.3.6.1.4.1.6296.9.5.1.2.1.10
Loss of Power 1-day interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAtucPerfESsThresh1DayTrap 1.3.6.1.4.1.6296.9.5.1.2.1.11
Errored Seconds 1-day interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAtucPerfSesLThresh1DayTrap 1.3.6.1.4.1.6296.9.5.1.2.1.12
Severely Errored Seconds 1-day interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAtucPerfUasLThresh1DayTrap 1.3.6.1.4.1.6296.9.5.1.2.1.13
Unavailable Errored Seconds 1-day interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAtucPerfFecsLThresh1DayTrap 1.3.6.1.4.1.6296.9.5.1.2.1.14
Forward error correction Seconds 1-day interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAturTraps 1.3.6.1.4.1.6296.9.5.1.2.2
OBJECT IDENTIFIER    

dsAdslAturSesLThreshTrap 1.3.6.1.4.1.6296.9.5.1.2.2.1
Severely Errored Seconds 15-minute interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAturUasLThreshTrap 1.3.6.1.4.1.6296.9.5.1.2.2.2
Unavailable Errored Seconds 15-minute interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAturPerfFecsLThreshTrap 1.3.6.1.4.1.6296.9.5.1.2.2.3
Forward error correction 15-minute interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAturPerfLofsThresh1DayTrap 1.3.6.1.4.1.6296.9.5.1.2.2.4
Loss of Frames 1-day interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAturPerfLossThresh1DayTrap 1.3.6.1.4.1.6296.9.5.1.2.2.5
Loss of Signal 1-day interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAturPerfLprsThresh1DayTrap 1.3.6.1.4.1.6296.9.5.1.2.2.6
Loss of Power 1-day interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAturPerfESsThresh1DayTrap 1.3.6.1.4.1.6296.9.5.1.2.2.7
Errored Seconds 1-day interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAturPerfSesLThresh1DayTrap 1.3.6.1.4.1.6296.9.5.1.2.2.8
Severely Errored Seconds 1-day interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAturPerfUasLThresh1DayTrap 1.3.6.1.4.1.6296.9.5.1.2.2.9
Unavailable Errored Seconds 1-day interval threshold reached
Status: current Access: read-write
NOTIFICATION-TYPE    

dsAdslAturPerfFecsLThresh1DayTrap 1.3.6.1.4.1.6296.9.5.1.2.2.10
Forward error correction Seconds 1-day interval threshold is reached
Status: current Access: read-write
NOTIFICATION-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor