DAVID-MIB

File: DAVID-MIB.mib (63137 bytes)

Imported modules

RFC1155-SMI SNMPv2-TC

Imported symbols

enterprises OBJECT-TYPE NetworkAddress
IpAddress Counter Gauge
TimeTicks DisplayString

Defined Types

ExNetSlotConfigEntry  
SEQUENCE    
  exNetSlotIndex INTEGER
  exNetBoardId INTEGER
  exNetBoardType INTEGER
  exNetBoardDescr DisplayString
  exNetBoardNumOfPorts INTEGER

ExNetModuleEntry  
SEQUENCE    
  exNetModuleIndex INTEGER
  exNetModuleType INTEGER
  exNetModuleHwVer INTEGER
  exNetModuleStatus INTEGER
  exNetModuleReset INTEGER
  exNetModulePartStatus INTEGER
  exNetModuleNmCntlStatus INTEGER
  exNetModulePsStatus INTEGER
  exNetModuleFrmsRxOk Counter
  exNetModuleOctetsRxOk Counter
  exNetModuleColls Counter
  exNetModuleTooLongErrors Counter
  exNetModuleRuntErrors Counter
  exNetModuleAlignErrors Counter
  exNetModuleFcsErrors Counter
  exNetModuleLateCollErrors Counter
  exNetModuleName DisplayString
  exNetModuleJabbers Counter
  exNetModuleSfdErrors Counter
  exNetModuleAutoPartitions Counter
  exNetModuleOosBitRate Counter
  exNetModuleLinkErrors Counter
  exNetModuleFrameErrors Counter
  exNetModuleFragErrors Counter
  exNetModulePortConfig INTEGER
  exNetModuleLinkStatConfig INTEGER
  exNetModuleResetTimeStamp INTEGER
  exNetModuleLinkStatus INTEGER
  exNetModuleFwVer INTEGER
  exNetModuleFwFeaturePkg INTEGER
  exNetModuleSelfTestResult INTEGER

ExNetPortEntry  
SEQUENCE    
  exNetPortModuleIndex INTEGER
  exNetPortIndex INTEGER
  exNetPortLinkStatus INTEGER
  exNetPortPartStatus INTEGER
  exNetPortJabberStatus INTEGER
  exNetPortFrmsRxOk Counter
  exNetPortOctetsRxOk Counter
  exNetPortColls Counter
  exNetPortTooLongErrors Counter
  exNetPortRuntErrors Counter
  exNetPortAlignErrors Counter
  exNetPortFcsErrors Counter
  exNetPortLateCollErrors Counter
  exNetPortName DisplayString
  exNetPortJabbers Counter
  exNetPortSfdErrors Counter
  exNetPortAutoPartitions Counter
  exNetPortOosBitRate Counter
  exNetPortLinkErrors Counter
  exNetPortFrameErrors Counter
  exNetPortFragErrors Counter
  exNetPortType INTEGER
  exNetPortMauType INTEGER
  exNetPortConfig INTEGER
  exNetPortLinkStatConfig INTEGER
  exNetPortPolarity INTEGER
  exNetPortTransmitTest INTEGER

ExNetMgmtTrapReceiverEntry  
SEQUENCE    
  exNetMgmtTrapType INTEGER
  exNetMgmtTrapReceiverAddr IpAddress
  exNetMgmtTrapReceiverComm OCTET STRING

Defined Values

david 1.3.6.1.4.1.66
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.66.1
OBJECT IDENTIFIER    

davidExpressNet 1.3.6.1.4.1.66.1.3
OBJECT IDENTIFIER    

exNetChassis 1.3.6.1.4.1.66.1.3.1
OBJECT IDENTIFIER    

exNetEthernet 1.3.6.1.4.1.66.1.3.2
OBJECT IDENTIFIER    

exNetConcentrator 1.3.6.1.4.1.66.1.3.2.1
OBJECT IDENTIFIER    

exNetModule 1.3.6.1.4.1.66.1.3.2.2
OBJECT IDENTIFIER    

exNetPort 1.3.6.1.4.1.66.1.3.2.3
OBJECT IDENTIFIER    

exNetMgmt 1.3.6.1.4.1.66.1.3.2.4
OBJECT IDENTIFIER    

exNetChassisType 1.3.6.1.4.1.66.1.3.1.1
The chassis type (option).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), m6102(2), m6103(3), m6310tel(4), m6310rj(5), m6318st(6), m6318sma(7), reserved(8)  

exNetChassisBkplType 1.3.6.1.4.1.66.1.3.1.2
The chassis backplane type (option).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), expressNet(2), reserved(3)  

exNetChassisBkplRev 1.3.6.1.4.1.66.1.3.1.3
The chassis backplane revision.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetChassisPsType 1.3.6.1.4.1.66.1.3.1.4
The chassis power supply type. This refers to the chassis transformer. Each module (including the Supervisor Module) has its own switching power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), standardXfmr(2)  

exNetChassisPsStatus 1.3.6.1.4.1.66.1.3.1.5
The chassis power supply status. This refers t othe chassis transformer. Each module (including the Supervisor Module) has its own switching power supply. The status of the individual modules' power supplies is a module attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), failed(2)  

exNetSlotConfigTable 1.3.6.1.4.1.66.1.3.1.7
The chassis slot configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ExNetSlotConfigEntry

exNetSlotConfigEntry 1.3.6.1.4.1.66.1.3.1.7.1
Descriptions of the modules (or boards) in each slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ExNetSlotConfigEntry  

exNetSlotIndex 1.3.6.1.4.1.66.1.3.1.7.1.1
The DAVID ExpressNet chassis slot number. Valid entries are 1 to exNetChassisCapacity. On the physical Concentrator boxes, the Supervisor Modules are not numbered and the plug-in modules are numbered from 1 to n-1, where n is the number of slots in the Concentrator. For the purposes of the DAVID ExpressNet SNMP MIB, the Supervisor Module is numbered one past the highest-numbered plug-in module. For example, in a 12-Slot Concentrator, the plug-in modules are numbered 1-11 and the Supervisor Module is numbered 12.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetBoardId 1.3.6.1.4.1.66.1.3.1.7.1.2
The unique hardware ID for the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetBoardType 1.3.6.1.4.1.66.1.3.1.7.1.3
The type of the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER empty(1), other(2), m6203(3), m6201(4), m6311(5), m6312(6), m6313st(7), m6313sma(8), m6006(9), reserved(10)  

exNetBoardDescr 1.3.6.1.4.1.66.1.3.1.7.1.4
Textual description of the module type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

exNetBoardNumOfPorts 1.3.6.1.4.1.66.1.3.1.7.1.40
The number of ports supported by the plug-in module. For a 10BASE-T Module the value is 12; for an FOIRL Module, 6; for a Supervisor Module, 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetChassisCapacity 1.3.6.1.4.1.66.1.3.1.8
The number of slots in the chassis for plug-in modules. This number will be either five or twelve for a Concentrator and two for a Hub.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetConcRetimingStatus 1.3.6.1.4.1.66.1.3.2.1.1
Indicates whether this repeater has retiming turned on. All DAVID ExpressNet repeaters implement retiming, so the value on(2) is always returned for this variable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

exNetConcFrmsRxOk 1.3.6.1.4.1.66.1.3.2.1.2
A count of frames that are successfully received by the Concentrator. This counter does not include frames received with frame-too-long, runt, FCS, or alignment errors. This counter includes broadcast and multicast frames that are received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcOctetsRxOk 1.3.6.1.4.1.66.1.3.2.1.3
A count of data and padding octets in frames that are successfully received by the concentrator. This counter does not include frames received with frame-too-long, runt, FCS, or alignment errors. This counter includes octets in broadcast and multicast frames that are received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcMcastFrmsRxOk 1.3.6.1.4.1.66.1.3.2.1.4
A count of frames that are successfully received by the concentrator and are directed to an active non-broadcast group address. This counter does not include frames received with frame-too-long, runt, FCS, or alignment errors. Only frames that are for a multicast address that this interface is receiving are counted. Broadcast packets are not included.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcBcastFrmsRxOk 1.3.6.1.4.1.66.1.3.2.1.5
A count of frames that are successfully received by the concentrator and are directed to the broadcast group address. This counter does not include frames received with frame-too- long, runt, FCS, or alignment errors. Multicast packets are not included.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcColls 1.3.6.1.4.1.66.1.3.2.1.6
Total collisions involving an incoming packet on any port (link or Network Interface port) in the Concentrator. This counter increments once for each collision involving an incoming packet on any port, no matter how many ports are involved.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcTooLongErrors 1.3.6.1.4.1.66.1.3.2.1.7
A count of frames that are received by the Concentrator and exceed the maximum permitted frame size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcRuntErrors 1.3.6.1.4.1.66.1.3.2.1.8
Number of frames received by the Concentrator that have a correct preamble (including double 1), but are shorter than the minimum legal frame size of 64 bytes (512 bits). Runts are commonly collision fragments, and as such do not necessarily indicate a problem in the network. Runts are also known as 'short frames.'
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcFragErrors 1.3.6.1.4.1.66.1.3.2.1.9
Fragments of packets, shorter than the minimum legal transmission size of 96 bits, that are received on the Concentrator. Fragments indicate an external noise hit (a problem on the network). Fragments are also known as 'pygmies.'
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcAlignErrors 1.3.6.1.4.1.66.1.3.2.1.10
Number of frames received on the Concentrator that are byte-misaligned, such that the number of bits is not a multiple of 8. (These frames do not pass the frame check sequence check, but are not counted as FCS errors.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcFcsErrors 1.3.6.1.4.1.66.1.3.2.1.11
A count of frames received by the Concentrator that are an integral number of octets in length and do not pass the frame check sequence (FCS) check. FCS errors are sometimes called CRC errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcLateCollErrors 1.3.6.1.4.1.66.1.3.2.1.12
A total Concentrator count of the late collisions. The late collision counter for a port is incremented whenever a collision is detected on the port later than 512 bit times into the transmitted packet. Late collisions are not included in the collision count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcName 1.3.6.1.4.1.66.1.3.2.1.40
A descriptive string that can be used by a network administrator to name the Concentrator.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

exNetConcJabbers 1.3.6.1.4.1.66.1.3.2.1.41
A count of the number of times that the jabber function had to be invoked because a frame received from one of this Concentrator's ports exceeded 5 msec in duration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcSfdErrors 1.3.6.1.4.1.66.1.3.2.1.42
Amount of activity from this Concentrator's ports where a double-zero is seen before the start-frame delimiter (double-1). (This could indicate a polarity problem.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcAutoPartitions 1.3.6.1.4.1.66.1.3.2.1.43
Indicates how often ports on this Concentrator have been automatically partitioned by the Concentrator repeater function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcOosBitRate 1.3.6.1.4.1.66.1.3.2.1.44
Number of times that frames have been received on the Concentrator with the transmission frequency (data rate) badly out of spec. This counter is incremented when the frequency of a received frame is so far out of spec that the packet has been corrupted within the relay. The spec allows deviations of +/- 100 parts per million (ppm). The DAVID ExpressNet Intelligent Concentrators can handle greater deviations than this, depending on frame length.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcLinkErrors 1.3.6.1.4.1.66.1.3.2.1.45
This composite counter includes jabbers, auto-partitions, and start-frame delimiter errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcFrameErrors 1.3.6.1.4.1.66.1.3.2.1.46
This composite counter includes frame check sequence errors, fragments, short frames, long frames, and alignment errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetConcNetUtilization 1.3.6.1.4.1.66.1.3.2.1.47
A series of ten bytes, each indicating the percentage of bandwidth utilization for a 100-millisecond interval. Together they give the bandwidth utilization for the previous second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..10)  

exNetConcResetTimeStamp 1.3.6.1.4.1.66.1.3.2.1.48
The value of sysUpTime at the point that the Concentrator repeater state machine was last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

exNetConcReset 1.3.6.1.4.1.66.1.3.2.1.49
The reset state of the Concentrator's repeater state machine. Writing a 2 will reset the Concentrator's control logic, without changing the current configuration. Writing a 3 will reset the Concentrator to the initial factory default configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noReset(1), reset(2), resetToDefault(3)  

exNetModuleTable 1.3.6.1.4.1.66.1.3.2.2.1
A list of module entries. The number of entries is given by the number of modules that are obtained by the Concentrator Slot Configuration Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ExNetModuleEntry

exNetModuleEntry 1.3.6.1.4.1.66.1.3.2.2.1.1
A module entry containing objects at the module level for a particular module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ExNetModuleEntry  

exNetModuleIndex 1.3.6.1.4.1.66.1.3.2.2.1.1.1
A unique value for each module. Its value ranges between 1 and exNetChassisCapacity. The value for each module must remain constant at least from one reinitialization of the entity's network management system to the next reinitialization. This value is tied to the hardware chassis slot number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetModuleType 1.3.6.1.4.1.66.1.3.2.2.1.1.2
The type of the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER empty(1), other(2), m6203(3), m6201(4), m6311(5), m6312(6), m6313st(7), m6313sma(8), m6006(9), reserved(10)  

exNetModuleHwVer 1.3.6.1.4.1.66.1.3.2.2.1.1.3
The hardware configuration of the module or hub. For model 6311, 6312, and 6313 board types, the type of Network Interface provided with the board is indicated by the following values (0-3 apply to ExpressNet Hubs; 7 is returned for Concentrator modules): 0 = AUI 1 = 10BASE2 2 = 10BASE-T 3 = FOIRL 7 = no interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetModuleStatus 1.3.6.1.4.1.66.1.3.2.2.1.1.4
The operational status of the module. If the status is selfTestFail(3), the exNetModuleSelfTestResult will give more detailed information about the module's condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), noComms(2), selfTestFail(3)  

exNetModuleReset 1.3.6.1.4.1.66.1.3.2.2.1.1.5
The reset state of the module. Writing a 2 will reset the module's control logic, without changing the current configuration. Writing a 3 will reset the module to the initial factory default configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noReset(1), reset(2), resetToDefault(3)  

exNetModulePartStatus 1.3.6.1.4.1.66.1.3.2.2.1.1.6
Tells whether the module is partitioned or enabled. Writing a 2 will partition the module and 1 will enable the module.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), partition(2)  

exNetModuleNmCntlStatus 1.3.6.1.4.1.66.1.3.2.2.1.1.7
Tells whether the module is under network management control. DAVID ExpressNet Concentrators always return nmControl(2), since all modules are always under network management control.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notNmControl(1), nmControl(2)  

exNetModulePsStatus 1.3.6.1.4.1.66.1.3.2.2.1.1.8
The status of the module's power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), fail(2)  

exNetModuleFrmsRxOk 1.3.6.1.4.1.66.1.3.2.2.1.1.9
A count of frames that are successfully received by the module. This counter does not include frames received with frame-too-long, runt, FCS, or alignment errors. This counter includes broadcast and multicast frames that are received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetModuleOctetsRxOk 1.3.6.1.4.1.66.1.3.2.2.1.1.10
A count of data and padding octets in frames that are successfully received by the module. This counter does not include frames received with frame-too-long, runt, FCS, or alignment errors. This counter includes octets in broadcast and multicast frames that are received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetModuleColls 1.3.6.1.4.1.66.1.3.2.2.1.1.13
Total collisions involving an incoming packet on any link or the backplane connector in the module. This counter increments once for each collision involving an incoming packet on any port, no matter how many ports are involved.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetModuleTooLongErrors 1.3.6.1.4.1.66.1.3.2.2.1.1.14
A count of frames that are received by the module and exceed the maximum permitted frame size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetModuleRuntErrors 1.3.6.1.4.1.66.1.3.2.2.1.1.15
Number of frames received by the module that have a correct preamble (including double 1), but are shorter than the minimum legal frame size of 64 bytes (512 bits). Runts are commonly collision fragments, and as such do not necessarily indicate a problem in the network. Runts are also called 'short frames.'
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetModuleAlignErrors 1.3.6.1.4.1.66.1.3.2.2.1.1.16
Number of frames received by the module that are byte-misaligned, such that the number of bits is not a multiple of 8. (These frames do not pass the frame check sequence check, but are not counted as FCS errors.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetModuleFcsErrors 1.3.6.1.4.1.66.1.3.2.2.1.1.17
A count of frames received by the module that are an integral number of octets in length and do not pass the frame check sequence (FCS) check. FCS errors are sometimes called CRC errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetModuleLateCollErrors 1.3.6.1.4.1.66.1.3.2.2.1.1.18
A module count of the late collisions on all of the module's ports. The late collision counter for a port is incremented whenever a collision is detected on the port later than 512 bit times into the transmitted packet. Late collisions are not included in the collision count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetModuleName 1.3.6.1.4.1.66.1.3.2.2.1.1.40
A descriptive string that can be used by a network administrator to name the module.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

exNetModuleJabbers 1.3.6.1.4.1.66.1.3.2.2.1.1.41
A count of the number of times that the jabber function had to be invoked because a frame received from one of this module's ports exceeded 5 msec in duration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetModuleSfdErrors 1.3.6.1.4.1.66.1.3.2.2.1.1.42
Amount of activity from this module's ports where a double-zero is seen before the start-frame delimiter (double-1). (This could indicate a polarity problem.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetModuleAutoPartitions 1.3.6.1.4.1.66.1.3.2.2.1.1.43
Indicates how often ports on this module have been automatically partitioned by the module repeater function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetModuleOosBitRate 1.3.6.1.4.1.66.1.3.2.2.1.1.44
Number of times that frames have been received from ports on this module with the transmission frequency (data rate) badly out of spec. This counter is incremented when the frequency of a received frame is so far out of spec that the packet has been corrupted within the relay. The spec allows deviations of +/- 100 parts per million (ppm). The DAVID ExpressNet Concentrators can handle greater deviations than this, depending on frame length.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetModuleLinkErrors 1.3.6.1.4.1.66.1.3.2.2.1.1.45
This composite counter includes jabbers, auto-partitions, and start-frame delimiter errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetModuleFrameErrors 1.3.6.1.4.1.66.1.3.2.2.1.1.46
This composite counter includes frame check sequence errors, fragments, short frames, long frames, and alignment errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetModuleFragErrors 1.3.6.1.4.1.66.1.3.2.2.1.1.47
Fragments of packets, shorter than the minimum legal transmission size of 96 bits, that are received on the module. Fragments indicate an external noise hit (a problem on the network). Fragments are also known as 'pygmies.'
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetModulePortConfig 1.3.6.1.4.1.66.1.3.2.2.1.1.48
Compresses the configuration of all of this module's ports into a two-byte integer value. Sums f(x) as x goes from 1 to number of ports, where f(x) = 0 for disabled port and f(x) = exp(2,x-1) for enabled port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

exNetModuleLinkStatConfig 1.3.6.1.4.1.66.1.3.2.2.1.1.49
Compresses the link status configuration of all of this module's ports into a two-byte integer value. Sums f(x) as x goes from 1 to number of ports, where f(x) = 0 for port with link status disabled and f(x) = exp(2,x-1) for port with link status enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

exNetModuleResetTimeStamp 1.3.6.1.4.1.66.1.3.2.2.1.1.50
The value of sysUpTime at the point that the module repeater state machine was last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

exNetModuleLinkStatus 1.3.6.1.4.1.66.1.3.2.2.1.1.51
Compresses the link status of all of this module's ports into a two-byte integer value. Sums f(x) as x goes from 1 to number of ports, where f(x) = 0 for port with link status test passed (link active) and f(x) = exp(2,x-1) for port with link status test failed (link inactive). For ports with link status test disabled, zero is returned. For example, if link status is active on all ports, the value returned is zero. If link status for ports 3 and 7 is inactive and the rest of the ports have active link status, the value returned is (2^(3-1) + 2^(7-1)) = (4 + 64) = 68.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetModuleFwVer 1.3.6.1.4.1.66.1.3.2.2.1.1.52
The firmware revision of the GAP processor on the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetModuleFwFeaturePkg 1.3.6.1.4.1.66.1.3.2.2.1.1.53
The feature package associated with the GAP processor on the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetModuleSelfTestResult 1.3.6.1.4.1.66.1.3.2.2.1.1.54
The self-test result value returned by the GAP processor on the module. Zero indicates that the module passed all tests. Bits set in the result indicate error conditions, as follows: Bit number Error encountered 0 ROM failure 1 CPU failure 2 RAM failure 3 repeater module failure 4 reserved 5 internal power (-5v) failure 6 NI power fuse (+12v) failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetPortTable 1.3.6.1.4.1.66.1.3.2.3.1
A list of port entries. The number of entries is given by knowing the number of occupied slots in the exNetSlotConfigTable and the number of ports that are on an exNetModuleType.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ExNetPortEntry

exNetPortEntry 1.3.6.1.4.1.66.1.3.2.3.1.1
A port entry containing objects at the port level for a particular port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ExNetPortEntry  

exNetPortModuleIndex 1.3.6.1.4.1.66.1.3.2.3.1.1.1
A unique value for each module. Its value ranges between 1 and exNetChassisCapacity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetPortIndex 1.3.6.1.4.1.66.1.3.2.3.1.1.2
A unique value for each port. Its value ranges between 1 and the value of exNetBoardNumOfPorts for this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetPortLinkStatus 1.3.6.1.4.1.66.1.3.2.3.1.1.3
For 10BASE-T ports: this is the link integrity test defined by the 10BASE-T standard. If link status test is enabled, this flag indicates whether the link is active or inactive. There are several reasons for an inactive link: . PC or workstation connected to the MAU has been turned off . disrupted link (e.g., wiring problem) . TP-MAU on the end of the link is missing, dead, or powered off . transmit and receive polarities are swapped For FOIRL ports: the link status is constantly tested; thus, this variable is always meaningful. A value of off(1) indicates a low-light condition (poor signal quality). The value on(2) indicates that signal quality on the link is ok. For AUI ports: the value other(3) is always returned since link status test does not apply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2), other(3)  

exNetPortPartStatus 1.3.6.1.4.1.66.1.3.2.3.1.1.4
Indicates whether the port is currently partitioned by the Concentrator's auto-partition protection. (The Concentrator automatically partitions a port if it is signalling continuous collision, or 32 consecutive collisions.) Writing a 1 will forcibly unpartition the port. Writing a 2 or a 3 is illegal. To enable or disable the port, use the exNetPortConfig variable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), partition(2), autoPartition(3)  

exNetPortJabberStatus 1.3.6.1.4.1.66.1.3.2.3.1.1.5
Tells whether the DTE connected to the port is jabbering (receiving a frame longer than 5 msec in duration).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), jabbering(2)  

exNetPortFrmsRxOk 1.3.6.1.4.1.66.1.3.2.3.1.1.6
A count of frames that are successfully received by the port. This counter does not include frames received with frame-too- long, runt, FCS, or alignment errors. This counter includes broadcast and multicast frames that are received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetPortOctetsRxOk 1.3.6.1.4.1.66.1.3.2.3.1.1.7
A count of data and padding octets in frames that are successfully received by the port. This counter does not include frames received with frame-too-long, runt, FCS, or alignment errors. This counter includes octets in broadcast and multicast frames that are received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetPortColls 1.3.6.1.4.1.66.1.3.2.3.1.1.10
Number of times this port was involved in a collision with another port in the same Hub.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetPortTooLongErrors 1.3.6.1.4.1.66.1.3.2.3.1.1.11
A count of frames that are received by the port and exceed the maximum permitted frame size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetPortRuntErrors 1.3.6.1.4.1.66.1.3.2.3.1.1.12
Number of frames received by the port that have a correct preamble (including double 1), but are shorter than the minimum legal frame size of 64 bytes (512 bits). Runts are commonly collision fragments, and as such do not necessarily indicate a problem in the network. Runts are also called 'short frames.'
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetPortAlignErrors 1.3.6.1.4.1.66.1.3.2.3.1.1.13
Number of frames received by the port that are byte-misaligned, such that the number of bits is not a multiple of 8. (These frames do not pass the frame check sequence check, but are not counted as FCS errors.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetPortFcsErrors 1.3.6.1.4.1.66.1.3.2.3.1.1.14
A count of frames received by the port that are an integral number of octets in length and do not pass the frame check sequence (FCS) check. This counter is incremented when the frameCheckError status is detected. FCS errors are sometimes called CRC errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetPortLateCollErrors 1.3.6.1.4.1.66.1.3.2.3.1.1.15
Number of times that a collision has been detected on this port later than 512 bit times into the transmitted packet. Late collisions are not included in the collision count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetPortName 1.3.6.1.4.1.66.1.3.2.3.1.1.40
A descriptive string that can be used by a network administrator to name the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

exNetPortJabbers 1.3.6.1.4.1.66.1.3.2.3.1.1.41
A count of the number of times that the jabber function had to be invoked because a frame received from this port exceeded 5 msec in duration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetPortSfdErrors 1.3.6.1.4.1.66.1.3.2.3.1.1.42
Amount of activity from this port where a double-zero is seen before the start-frame delimiter (double-1). (This could indicate a polarity problem.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetPortAutoPartitions 1.3.6.1.4.1.66.1.3.2.3.1.1.43
Indicates how often this port has been automatically partitioned by the module repeater function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetPortOosBitRate 1.3.6.1.4.1.66.1.3.2.3.1.1.44
Number of times that frames have been received from this link with the transmission frequency (data rate) badly out of spec. This counter is incremented when the frequency of a received frame is so far out of spec that the packet has been corrupted within the relay. The spec allows deviations of +/- 100 parts per million (ppm). The DAVID ExpressNet Concentrators can handle greater deviations than this, depending on frame length.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetPortLinkErrors 1.3.6.1.4.1.66.1.3.2.3.1.1.45
This composite counter includes jabbers, auto-partitions, late collisions, start-frame delimiter errors, and out-of-spec bit rate errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetPortFrameErrors 1.3.6.1.4.1.66.1.3.2.3.1.1.46
This composite counter includes frame check sequence errors, fragments, short frames, long frames, and alignment errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetPortFragErrors 1.3.6.1.4.1.66.1.3.2.3.1.1.47
Fragments of packets, shorter than the minimum legal transmission size of 96 bits, that are received on this port. Fragments indicate an external noise hit (a problem on the network).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

exNetPortType 1.3.6.1.4.1.66.1.3.2.3.1.1.48
The type of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), repeater(2), tenBasefAsync(3), tenBasefSync(4)  

exNetPortMauType 1.3.6.1.4.1.66.1.3.2.3.1.1.49
The type of the MAU attached to the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), tenBase5(2), tenBaseT(3), fOIRL(4), tenBase2(5), tenBaseFA(6)  

exNetPortConfig 1.3.6.1.4.1.66.1.3.2.3.1.1.50
The administrative state of the port. If both transmit and receive are enabled, the port state is enabled. If both transmit and receive are disabled, the port state is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3), txDisabled(4), rxDisabled(5)  

exNetPortLinkStatConfig 1.3.6.1.4.1.66.1.3.2.3.1.1.51
The administrative status of the link status test for this link. If both transmit and receive are enabled, the link status test is enabled. If both transmit and receive are disabled, the link status test is disabled. This variable applies only to ports with MauType = 10BASE-T. The value other(1) is returned for other MAU types.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3), txDisabled(4), rxDisabled(5)  

exNetPortPolarity 1.3.6.1.4.1.66.1.3.2.3.1.1.52
The polarity of the port. Applies only to ports with MAU type 10BASE-T. The value other(1) is returned for other MAU types.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), positive(2), negative(3), txNegative(4), rxNegative(5)  

exNetPortTransmitTest 1.3.6.1.4.1.66.1.3.2.3.1.1.53
Whether or not transmit test is enabled on the link. Transmit test applies only to links of type 10BASE-T. The value other(1) is returned for other MAU types. THIS TEST CAN BE DISRUPTIVE TO THE NETWORK.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

exNetMgmtType 1.3.6.1.4.1.66.1.3.2.4.1
The DAVID ExpressNet Ethernet network management type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), tbd(2)  

exNetMgmtHwVer 1.3.6.1.4.1.66.1.3.2.4.2
The network management ICM hardware version number: 1=Rev. A, 2=Rev. B, etc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetMgmtFwVer 1.3.6.1.4.1.66.1.3.2.4.3
The network management ICP firmware version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetMgmtSwMajorVer 1.3.6.1.4.1.66.1.3.2.4.4
The network management major software version number, where the version number is of the form major.minor, e.g. 3.0. Refers to the ECP (External Communications Processor).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetMgmtSwMinorVer 1.3.6.1.4.1.66.1.3.2.4.5
The network management minor software version number, where the version number is of the form major.minor, e.g. 3.0. Refers to the ECP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exNetMgmtStatus 1.3.6.1.4.1.66.1.3.2.4.6
Indicates that the network management is on line and operating. For the DAVID ExpressNet Concentrators, management status is always online(2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER offline(1), online(2)  

exNetMgmtMode 1.3.6.1.4.1.66.1.3.2.4.7
Indicates whether the network management is operating in primary or secondary mode. Presently, all DAVID ExpressNet Concentrators return primary(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER primary(1), secondary(2)  

exNetMgmtReset 1.3.6.1.4.1.66.1.3.2.4.8
Network management reset status. Writing a 2 to this object will reset the network management (stop refreshing the watchdog timer) and restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notReset(1), reset(2)  

exNetMgmtRestart 1.3.6.1.4.1.66.1.3.2.4.9
Network management restart status. Writing a 2 to this object will restart the network management. This initializes all the counters, rereads the EEPROM data structure, and starts executing from the beginning of the code.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notRestart(1), restart(2)  

exNetMgmtIpAddr 1.3.6.1.4.1.66.1.3.2.4.10
The network management's administrative IP address. This parameter will take effect ONLY after a restart (exNetMgmtRestart) or reset (exNetMgmtReset) is issued. At that time it becomes the operational IP address. The value of the CURRENT operational IP address can be obtained from the ipAdEntAddr entry in the ipAddrTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

exNetMgmtNetMask 1.3.6.1.4.1.66.1.3.2.4.11
The network management's administrative subnet mask. This parameter will take effect ONLY after a restart (exNetMgmtRestart) or reset (exNetMgmtReset) is issued. At that time it becomes the operational subnet mask. The value of the CURRENT operational subnet mask can be obtained from the ipAdEntNetMask entry in the ipAddrTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

exNetMgmtDefaultGateway 1.3.6.1.4.1.66.1.3.2.4.12
The network management's administrative default gateway IP address. This parameter will take effect ONLY after a restart (exNetMgmtRestart) or reset (exNetMgmtReset) is issued. At that time it becomes the operational default gateway IP address. The value of the CURRENT operational default gateway's IP address can be obtained from the ipRoutingTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

exNetMgmtBaudRate 1.3.6.1.4.1.66.1.3.2.4.17
Returns the baud rate in bits per second of the RS-232 port. Note: The Concentrators autobaud to match the device attached to the RS-232 port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

exNetMgmtLocation 1.3.6.1.4.1.66.1.3.2.4.19
This is an informational string that could be used to show the physical location (i.e., area) of the network management or Concentrator. This parameter is saved in non-volatile memory and will survive a reset. Note: This variable is aliased to the sysLocation variable in the MIB-II system group. Changing one will change the other. It is suggested that the system group variable be used whenever possible.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

exNetMgmtTrapReceiverTable 1.3.6.1.4.1.66.1.3.2.4.20
This entity's Trap Receiver Table (10 entries).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ExNetMgmtTrapReceiverEntry

exNetMgmtTrapReceiverEntry 1.3.6.1.4.1.66.1.3.2.4.20.1
A destination address and community string to a particular trap receiver.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ExNetMgmtTrapReceiverEntry  

exNetMgmtTrapType 1.3.6.1.4.1.66.1.3.2.4.20.1.1
Setting this object to the value invalid(2) invalidates the corresponding entry in the exNetTrapReceiverTable. That is, it effectively disassociates the address identified with the entry by removing the entry from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2)  

exNetMgmtTrapReceiverAddr 1.3.6.1.4.1.66.1.3.2.4.20.1.2
IP address for trap receiver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

exNetMgmtTrapReceiverComm 1.3.6.1.4.1.66.1.3.2.4.20.1.3
Community string used for traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(20)  

exNetMgmtAuthTrap 1.3.6.1.4.1.66.1.3.2.4.21
Enable or disable the use of authentication error trap generation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)