DDN-WOS-MIB

File: DDN-WOS-MIB.mib (55162 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC INET-ADDRESS-MIB
SNMPv2-CONF

Imported symbols

enterprises MODULE-IDENTITY NOTIFICATION-TYPE
OBJECT-TYPE Gauge32 Counter64
Unsigned32 TEXTUAL-CONVENTION DisplayString
DateAndTime TruthValue InetAddressType
InetAddress MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP

Defined Types

WosSeverityLevel  
Specifies the severity level of an event: emergency: A panic condition - notify all tech staff on call. alert: Should be corrected immediately - notify staff who can fix the problem - e.g. drive down alert. critical: Should be corrected immediately. Indicates failure in a primary system - fix CRITICAL problems before ALERT error: Non-urgent failures - these should be relayed to developers or admins - each item must be resolved within a given time. warning: Warning messages - not an error, but indication that an error will occur if action is not taken - e.g. cluster capacity is 70% used - each item must be resolved within a given time. notice: Events that are unusual but not error conditions - might be summarized in an email to developers or admins to spot potential problems - no immediate action required. informational: Normal operational messages - may be harvested for reporting, measuring throughput, etc - no action required. debug: Info useful to developers for debugging the application - not useful during operations.
TEXTUAL-CONVENTION    
  INTEGER emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), informational(7), debug(8)  

WosSyslogFacility  
The syslog standard Facilities (from RFC 3164). user (1) - random user-level messages mail (2) - mail system daemon (3) - system daemons auth (4) - security/authorization messages syslog (5) - messages generated internally by syslogd lpr (6) - line printer subsystem news (7) - network news subsystem uucp (8) - UUCP subsystem cron (9) - clock daemon authpriv (10) - security/authorization messages (private) ftp (11) - ftp daemon local0 (16) - reserved for local use local1 (17) - reserved for local use local2 (18) - reserved for local use local3 (19) - reserved for local use local4 (20) - reserved for local use local5 (21) - reserved for local use local6 (22) - reserved for local use local7 (23) - reserved for local use
TEXTUAL-CONVENTION    
  INTEGER user(1), mail(2), daemon(3), auth(4), syslog(5), lpr(6), news(7), uucp(8), cron(9), authpriv(10), ftp(11), local0(16), local1(17), local2(18), local3(19), local4(20), local5(21), local6(22), local7(23)  

WosAlertEntry  
SEQUENCE    
  wosAlertIndex Unsigned32
  wosAlertSeverity WosSeverityLevel
  wosAlertTime DateAndTime
  wosAlertType DisplayString
  wosAlertLocation DisplayString
  wosAlertDesc DisplayString

WosZoneEntry  
SEQUENCE    
  wosZoneId Unsigned32
  wosZoneName DisplayString
  wosZoneNodeCount Unsigned32

WosNodeEntry  
SEQUENCE    
  wosNodeIndex Unsigned32
  wosNodeName DisplayString
  wosNodeAddressType InetAddressType
  wosNodeAddress InetAddress
  wosNodeZoneName DisplayString
  wosNodeStatus DisplayString
  wosNodeFwVersion DisplayString
  wosNodeObjectCountLow Unsigned32
  wosNodeObjectCountHigh Unsigned32
  wosNodeTotalCapacity Unsigned32
  wosNodeUsedCapacity Unsigned32
  wosNodePercentFull Gauge32

WosPendingNodeEntry  
SEQUENCE    
  wosPendingNodeIndex Unsigned32
  wosPendingNodeAddressType InetAddressType
  wosPendingNodeAddress InetAddress
  wosPendingNodeStatus DisplayString

WosNodeDriveEntry  
SEQUENCE    
  wosNodeDriveSlotNbr Unsigned32
  wosNodeDriveNodeName DisplayString
  wosNodeDriveMfgr DisplayString
  wosNodeDriveModel DisplayString
  wosNodeDriveSerialNbr DisplayString
  wosNodeDriveStatus DisplayString
  wosNodeDriveCapacity Unsigned32

WosPolicyEntry  
SEQUENCE    
  wosPolicyIndex Unsigned32
  wosPolicyReplicaIndex Unsigned32
  wosPolicyId DisplayString
  wosPolicyName DisplayString
  wosPolicyReplicaZoneName DisplayString
  wosPolicyReplicaCount Unsigned32
  wosPolicyReplicationType DisplayString
  wosPolicyLocalDataProtection TruthValue
  wosPolicyObjCountLow Unsigned32
  wosPolicyObjCountHigh Unsigned32
  wosPolicyNonComplObjCountLow Unsigned32
  wosPolicyNonComplObjCountHigh Unsigned32
  wosPolicyUsedCapacity Unsigned32

WosPrefEmailAlertRecipientEntry  
SEQUENCE    
  wosPrefEmailAlertRecipientIndex Unsigned32
  wosPrefEmailAlertRecipient DisplayString

WosPrefEmailAlertServerEntry  
SEQUENCE    
  wosPrefEmailAlertServerIndex Unsigned32
  wosPrefEmailAlertServer DisplayString

WosPrefSnmpManagerEntry  
SEQUENCE    
  wosPrefSnmpManagerIndex Unsigned32
  wosPrefSnmpManager DisplayString

WosPrefMgmtIpFilterEntry  
SEQUENCE    
  wosPrefMgmtIpFilterIndex Unsigned32
  wosPrefMgmtIpFilter DisplayString

WosPrefClientIpFilterEntry  
SEQUENCE    
  wosPrefClientIpFilterIndex Unsigned32
  wosPrefClientIpFilter DisplayString

Defined Values

wosMIB 1.3.6.1.4.1.6894.4.1
SMI v2 MIB module for WOS (Web Object Scalar).
MODULE-IDENTITY    

datadirect 1.3.6.1.4.1.6894
OBJECT IDENTIFIER    

wos 1.3.6.1.4.1.6894.4
OBJECT IDENTIFIER    

wosNotifications 1.3.6.1.4.1.6894.4.1.0
OBJECT IDENTIFIER    

wosObjects 1.3.6.1.4.1.6894.4.1.1
OBJECT IDENTIFIER    

wosConformance 1.3.6.1.4.1.6894.4.1.2
OBJECT IDENTIFIER    

wosNotificationInfo 1.3.6.1.4.1.6894.4.1.1.1
OBJECT IDENTIFIER    

wosStatsInfo 1.3.6.1.4.1.6894.4.1.1.2
OBJECT IDENTIFIER    

wosAlertsInfo 1.3.6.1.4.1.6894.4.1.1.3
OBJECT IDENTIFIER    

wosClusterInfo 1.3.6.1.4.1.6894.4.1.1.4
OBJECT IDENTIFIER    

wosZonesInfo 1.3.6.1.4.1.6894.4.1.1.5
OBJECT IDENTIFIER    

wosNodesInfo 1.3.6.1.4.1.6894.4.1.1.6
OBJECT IDENTIFIER    

wosPoliciesInfo 1.3.6.1.4.1.6894.4.1.1.7
OBJECT IDENTIFIER    

wosPrefsInfo 1.3.6.1.4.1.6894.4.1.1.8
OBJECT IDENTIFIER    

wosTrapDesc 1.3.6.1.4.1.6894.4.1.1.1.1
Description of the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

wosTrapSeverity 1.3.6.1.4.1.6894.4.1.1.1.2
Severity of the notification. emergency: A panic condition - notify all tech staff on call. alert: Should be corrected immediately - notify staff who can fix the problem - e.g. drive down alert. critical: Should be corrected immediately. Indicates failure in a primary system - fix CRITICAL problems before ALERT error: Non-urgent failures - these should be relayed to developers or admins - each item must be resolved within a given time. warning: Warning messages - not an error, but indication that an error will occur if action is not taken - e.g. cluster capacity is 70% used - each item must be resolved within a given time. notice: Events that are unusual but not error conditions - might be summarized in an email to developers or admins to spot potential problems - no immediate action required. informational: Normal operational messages - may be harvested for reporting, measuring throughput, etc - no action required. debug: Info useful to developers for debugging the application - not useful during operations.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  WosSeverityLevel  

wosTrapType 1.3.6.1.4.1.6894.4.1.1.1.3
Identifies the type of the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

wosTrapLocation 1.3.6.1.4.1.6894.4.1.1.1.4
A location pertaining to the notification (node IP address, cluster name, zone name, etc.)
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

wosStatsFRPS 1.3.6.1.4.1.6894.4.1.1.2.1
Object read rate in file reads per second.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

wosStatsFWPS 1.3.6.1.4.1.6894.4.1.1.2.2
Object write rate in file writes per second.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

wosStatsFDPS 1.3.6.1.4.1.6894.4.1.1.2.3
Object delete rate in file deletes per second.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

wosStatsReadLatency 1.3.6.1.4.1.6894.4.1.1.2.4
Object read latency in milliseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

wosStatsWriteLatency 1.3.6.1.4.1.6894.4.1.1.2.5
Object write latency in milliseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

wosStatsDeleteLatency 1.3.6.1.4.1.6894.4.1.1.2.6
Object delete latency in milliseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

wosStatsReadThroughput 1.3.6.1.4.1.6894.4.1.1.2.7
Object read throughput.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

wosStatsWriteThroughput 1.3.6.1.4.1.6894.4.1.1.2.8
Object write throughput.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

wosStatsReadCount 1.3.6.1.4.1.6894.4.1.1.2.9
Total number of read transactions since the last cluster restart.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wosStatsWriteCount 1.3.6.1.4.1.6894.4.1.1.2.10
Total number of write transactions since the last cluster restart.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wosStatsDeleteCount 1.3.6.1.4.1.6894.4.1.1.2.11
Total number of delete transactions since the last cluster restart.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wosAlertTable 1.3.6.1.4.1.6894.4.1.1.3.1
Table containing cluster alerts.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WosAlertEntry

wosAlertEntry 1.3.6.1.4.1.6894.4.1.1.3.1.1
An entry in wosAlertTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WosAlertEntry  

wosAlertIndex 1.3.6.1.4.1.6894.4.1.1.3.1.1.1
Alert table index. The most recent alert is assigned starting at index 1, and older alerts are assigned indices in ascending order.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wosAlertSeverity 1.3.6.1.4.1.6894.4.1.1.3.1.1.2
Severity of the alert. emergency: A panic condition - notify all tech staff on call. alert: Should be corrected immediately - notify staff who can fix the problem - e.g. drive down alert. critical: Should be corrected immediately. Indicates failure in a primary system - fix CRITICAL problems before ALERT error: Non-urgent failures - these should be relayed to developers or admins - each item must be resolved within a given time. warning: Warning messages - not an error, but indication that an error will occur if action is not taken - e.g. cluster capacity is 70% used - each item must be resolved within a given time. notice: Events that are unusual but not error conditions - might be summarized in an email to developers or admins to spot potential problems - no immediate action required. informational: Normal operational messages - may be harvested for reporting, measuring throughput, etc - no action required. debug: Info useful to developers for debugging the application - not useful during operations.
Status: current Access: read-only
OBJECT-TYPE    
  WosSeverityLevel  

wosAlertTime 1.3.6.1.4.1.6894.4.1.1.3.1.1.3
Date and time the alert was generated.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

wosAlertType 1.3.6.1.4.1.6894.4.1.1.3.1.1.4
Identifies the type of the alert.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosAlertLocation 1.3.6.1.4.1.6894.4.1.1.3.1.1.5
A location pertaining to the alert (node IP address, cluster name, zone name, etc.)
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosAlertDesc 1.3.6.1.4.1.6894.4.1.1.3.1.1.6
Description of the alert.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosClusterName 1.3.6.1.4.1.6894.4.1.1.4.1
The name of the cluster.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosClusterId 1.3.6.1.4.1.6894.4.1.1.4.2
The ID number of the cluster.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosClusterStatus 1.3.6.1.4.1.6894.4.1.1.4.3
The cluster status.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosClusterPrimaryNodeAddressType 1.3.6.1.4.1.6894.4.1.1.4.4
The IP address type of the primary cluster node.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

wosClusterPrimaryNodeAddress 1.3.6.1.4.1.6894.4.1.1.4.5
The IP address of the cluster primary node. Refer to wosClusterPrimaryNodeAddress to determine the address type.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

wosClusterTotalNodeCount 1.3.6.1.4.1.6894.4.1.1.4.6
The total number of nodes in the cluster.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosClusterActiveNodeCount 1.3.6.1.4.1.6894.4.1.1.4.7
The number of nodes in the cluster that are active.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosClusterDisconnectedNodeCount 1.3.6.1.4.1.6894.4.1.1.4.8
Then number of nodes in the cluster that are disconnected.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosClusterConnectedClientsCount 1.3.6.1.4.1.6894.4.1.1.4.9
The number of active client connections to the cluster.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosClusterObjectCountLow 1.3.6.1.4.1.6894.4.1.1.4.10
The total number of objects stored in the cluster. Together with wosClusterObjectCountHigh this composes a 64-bit number.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosClusterObjectCountHigh 1.3.6.1.4.1.6894.4.1.1.4.11
The total number of objects stored in the cluster. Together with wosClusterObjectCountLow this composes a 64-bit number.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosClusterUsableCapacity 1.3.6.1.4.1.6894.4.1.1.4.12
The usable capacity of the cluster.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosClusterUsedCapacity 1.3.6.1.4.1.6894.4.1.1.4.13
The used capacity of the cluster.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosClusterFreeCapacity 1.3.6.1.4.1.6894.4.1.1.4.14
Total free capacity of the cluster.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosZoneTable 1.3.6.1.4.1.6894.4.1.1.5.1
Table containing cluster zones.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WosZoneEntry

wosZoneEntry 1.3.6.1.4.1.6894.4.1.1.5.1.1
An entry in wosZoneTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WosZoneEntry  

wosZoneId 1.3.6.1.4.1.6894.4.1.1.5.1.1.1
An integer that uniquely identifies the zone in the cluster and is the index value for wosZoneTable entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wosZoneName 1.3.6.1.4.1.6894.4.1.1.5.1.1.2
The name of the zone.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosZoneNodeCount 1.3.6.1.4.1.6894.4.1.1.5.1.1.3
The number of nodes accepted into the zone.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosNodeTable 1.3.6.1.4.1.6894.4.1.1.6.1
Table containing cluster nodes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WosNodeEntry

wosNodeEntry 1.3.6.1.4.1.6894.4.1.1.6.1.1
An entry in wosNodeTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WosNodeEntry  

wosNodeIndex 1.3.6.1.4.1.6894.4.1.1.6.1.1.1
An arbitrary integer used as the index value for wosNodeTable entries. The index value can change at any time.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wosNodeName 1.3.6.1.4.1.6894.4.1.1.6.1.1.2
The node name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosNodeAddressType 1.3.6.1.4.1.6894.4.1.1.6.1.1.3
The IP address type of the node.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

wosNodeAddress 1.3.6.1.4.1.6894.4.1.1.6.1.1.4
The IP address of the node. Refer to wosNodeAddressType to determine the address type.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

wosNodeZoneName 1.3.6.1.4.1.6894.4.1.1.6.1.1.5
The name of the zone that the node belongs to.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosNodeStatus 1.3.6.1.4.1.6894.4.1.1.6.1.1.6
The status of the node (e.g. active, connecting, etc.).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosNodeFwVersion 1.3.6.1.4.1.6894.4.1.1.6.1.1.7
The version number of the node's firmware.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosNodeObjectCountLow 1.3.6.1.4.1.6894.4.1.1.6.1.1.8
The total number of objects stored on the node. Together with wosNodeObjectCountHigh this composes a 64-bit number.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosNodeObjectCountHigh 1.3.6.1.4.1.6894.4.1.1.6.1.1.9
The total number of objects stored on the node. Together with wosNodeObjectCountLow this composes a 64-bit number.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosNodeTotalCapacity 1.3.6.1.4.1.6894.4.1.1.6.1.1.10
The total capacity of the node.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosNodeUsedCapacity 1.3.6.1.4.1.6894.4.1.1.6.1.1.11
The used capacity of the node.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosNodePercentFull 1.3.6.1.4.1.6894.4.1.1.6.1.1.12
The used capacity of the node as a percentage of the total capacity.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

wosPendingNodeTable 1.3.6.1.4.1.6894.4.1.1.6.2
Table containing pending nodes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WosPendingNodeEntry

wosPendingNodeEntry 1.3.6.1.4.1.6894.4.1.1.6.2.1
An entry in wosPendingNodeTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WosPendingNodeEntry  

wosPendingNodeIndex 1.3.6.1.4.1.6894.4.1.1.6.2.1.1
An arbitrary integer used as the index value for wosPendingNodeTable entries. The index value can change at any time.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wosPendingNodeAddressType 1.3.6.1.4.1.6894.4.1.1.6.2.1.2
The IP address type of the pending node.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

wosPendingNodeAddress 1.3.6.1.4.1.6894.4.1.1.6.2.1.3
The IP address of the pending node. Refer to wosPendingNodeAddressType to determine the address type.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

wosPendingNodeStatus 1.3.6.1.4.1.6894.4.1.1.6.2.1.4
The status of the pending node (e.g. pending, pending (upgrading), etc.).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosNodeDriveTable 1.3.6.1.4.1.6894.4.1.1.6.3
Table containing details about a node's disk drives.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WosNodeDriveEntry

wosNodeDriveEntry 1.3.6.1.4.1.6894.4.1.1.6.3.1
An entry in wosNodeDriveTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WosNodeDriveEntry  

wosNodeDriveSlotNbr 1.3.6.1.4.1.6894.4.1.1.6.3.1.1
The slot number of the node that the drive is installed in.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wosNodeDriveNodeName 1.3.6.1.4.1.6894.4.1.1.6.3.1.2
The name of the node that the drive is installed in.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosNodeDriveMfgr 1.3.6.1.4.1.6894.4.1.1.6.3.1.3
The drive manufacturer.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosNodeDriveModel 1.3.6.1.4.1.6894.4.1.1.6.3.1.4
The drive model number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosNodeDriveSerialNbr 1.3.6.1.4.1.6894.4.1.1.6.3.1.5
The drive serial number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosNodeDriveStatus 1.3.6.1.4.1.6894.4.1.1.6.3.1.6
The status of the drive (e.g. down, not present, etc.).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosNodeDriveCapacity 1.3.6.1.4.1.6894.4.1.1.6.3.1.7
The total capacity of the drive.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosPolicyTable 1.3.6.1.4.1.6894.4.1.1.7.1
Table containing policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WosPolicyEntry

wosPolicyEntry 1.3.6.1.4.1.6894.4.1.1.7.1.1
An entry in wosPolicyTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WosPolicyEntry  

wosPolicyIndex 1.3.6.1.4.1.6894.4.1.1.7.1.1.1
An arbitrary integer used as an index value for wosPolicyTable entries. The index value can change at any time.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wosPolicyReplicaIndex 1.3.6.1.4.1.6894.4.1.1.7.1.1.2
An integer used as an index value for a zone replica in wosPolicyTable entries. The first zone replica in a policy is assigned starting at index 1 and the remaining zone replicas are assigned indices in ascending order.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wosPolicyId 1.3.6.1.4.1.6894.4.1.1.7.1.1.3
The ID number of the policy.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosPolicyName 1.3.6.1.4.1.6894.4.1.1.7.1.1.4
The name of the policy.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosPolicyReplicaZoneName 1.3.6.1.4.1.6894.4.1.1.7.1.1.5
The name of the zone containing replicas for the policy.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosPolicyReplicaCount 1.3.6.1.4.1.6894.4.1.1.7.1.1.6
The number of replicas in the zone for the policy.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosPolicyReplicationType 1.3.6.1.4.1.6894.4.1.1.7.1.1.7
The replication type of the policy.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosPolicyLocalDataProtection 1.3.6.1.4.1.6894.4.1.1.7.1.1.8
True if local data protection is enabled for the policy.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wosPolicyObjCountLow 1.3.6.1.4.1.6894.4.1.1.7.1.1.9
The total number of objects stored against the policy. Together with wosPolicyObjCountHigh this composes a 64-bit number.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosPolicyObjCountHigh 1.3.6.1.4.1.6894.4.1.1.7.1.1.10
The total number of objects stored against the policy. Together with wosPolicyObjCountLow this composes a 64-bit number.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosPolicyNonComplObjCountLow 1.3.6.1.4.1.6894.4.1.1.7.1.1.11
The total number of non-compliant objects stored against the policy. Together with wosPolicyObjCountHigh this composes a 64-bit number.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosPolicyNonComplObjCountHigh 1.3.6.1.4.1.6894.4.1.1.7.1.1.12
The total number of non-compliant objects stored against the policy. Together with wosPolicyObjCountLow this composes a 64-bit number.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosPolicyUsedCapacity 1.3.6.1.4.1.6894.4.1.1.7.1.1.13
The total capacity used by the policy.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosPrefStoreUnderReplObjs 1.3.6.1.4.1.6894.4.1.1.8.1
True if storage of under-replicated objects is allowed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wosPrefNodeDownDelay 1.3.6.1.4.1.6894.4.1.1.8.2
The node down delay time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosPrefEmailAlertNewInterval 1.3.6.1.4.1.6894.4.1.1.8.3
The minimum delay time between notifications of new alerts.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosPrefEmailAlertRmndrInterval 1.3.6.1.4.1.6894.4.1.1.8.4
The minimum delay time between reminders of existing alerts.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wosPrefEmailAlertFromAddr 1.3.6.1.4.1.6894.4.1.1.8.5
The From address for email alerts.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosPrefEmailAlertRecipientTable 1.3.6.1.4.1.6894.4.1.1.8.6
Table containing email alert recipients.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WosPrefEmailAlertRecipientEntry

wosPrefEmailAlertRecipientEntry 1.3.6.1.4.1.6894.4.1.1.8.6.1
An entry in wosPrefEmailAlertRecipientTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WosPrefEmailAlertRecipientEntry  

wosPrefEmailAlertRecipientIndex 1.3.6.1.4.1.6894.4.1.1.8.6.1.1
Email alert table index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wosPrefEmailAlertRecipient 1.3.6.1.4.1.6894.4.1.1.8.6.1.2
The email alert recipient.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosPrefEmailAlertServerTable 1.3.6.1.4.1.6894.4.1.1.8.7
Table containing outgoing email servers for email alerts.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WosPrefEmailAlertServerEntry

wosPrefEmailAlertServerEntry 1.3.6.1.4.1.6894.4.1.1.8.7.1
An entry in wosPrefEmailAlertServerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WosPrefEmailAlertServerEntry  

wosPrefEmailAlertServerIndex 1.3.6.1.4.1.6894.4.1.1.8.7.1.1
Email alert server table index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wosPrefEmailAlertServer 1.3.6.1.4.1.6894.4.1.1.8.7.1.2
The outgoing email server for email alerts.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosPrefSnmpManagerTable 1.3.6.1.4.1.6894.4.1.1.8.8
Table containing SNMP managers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WosPrefSnmpManagerEntry

wosPrefSnmpManagerEntry 1.3.6.1.4.1.6894.4.1.1.8.8.1
An entry in wosPrefSnmpManagerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WosPrefSnmpManagerEntry  

wosPrefSnmpManagerIndex 1.3.6.1.4.1.6894.4.1.1.8.8.1.1
SNMP Manager table index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wosPrefSnmpManager 1.3.6.1.4.1.6894.4.1.1.8.8.1.2
The SNMP manager.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosPrefSnmpTrapCommunityName 1.3.6.1.4.1.6894.4.1.1.8.9
The community name for the SNMP traps.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosPrefMgmtIpFilterTable 1.3.6.1.4.1.6894.4.1.1.8.10
Table containing management IP filters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WosPrefMgmtIpFilterEntry

wosPrefMgmtIpFilterEntry 1.3.6.1.4.1.6894.4.1.1.8.10.1
An entry in wosPrefMgmtIpFilterTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WosPrefMgmtIpFilterEntry  

wosPrefMgmtIpFilterIndex 1.3.6.1.4.1.6894.4.1.1.8.10.1.1
Management IP filter table index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wosPrefMgmtIpFilter 1.3.6.1.4.1.6894.4.1.1.8.10.1.2
The management IP filter.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosPrefClientIpFilterTable 1.3.6.1.4.1.6894.4.1.1.8.11
Table containing client I/O IP filters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WosPrefClientIpFilterEntry

wosPrefClientIpFilterEntry 1.3.6.1.4.1.6894.4.1.1.8.11.1
An entry in wosPrefClientIpFilterTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WosPrefClientIpFilterEntry  

wosPrefClientIpFilterIndex 1.3.6.1.4.1.6894.4.1.1.8.11.1.1
Client I/O IP filter table index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wosPrefClientIpFilter 1.3.6.1.4.1.6894.4.1.1.8.11.1.2
The client I/O IP filter.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosPrefSyslogFacility 1.3.6.1.4.1.6894.4.1.1.8.12
The Syslog Facility. user (1) - random user-level messages mail (2) - mail system daemon (3) - system daemons auth (4) - security/authorization messages syslog (5) - messages generated internally by syslogd lpr (6) - line printer subsystem news (7) - network news subsystem uucp (8) - UUCP subsystem cron (9) - clock daemon authpriv (10) - security/authorization messages (private) ftp (11) - ftp daemon local0 (16) - reserved for local use local1 (17) - reserved for local use local2 (18) - reserved for local use local3 (19) - reserved for local use local4 (20) - reserved for local use local5 (21) - reserved for local use local6 (22) - reserved for local use local7 (23) - reserved for local use
Status: current Access: read-only
OBJECT-TYPE    
  WosSyslogFacility  

wosPrefSyslogRemoteHost 1.3.6.1.4.1.6894.4.1.1.8.13
The remote syslog host.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wosTrapMessage 1.3.6.1.4.1.6894.4.1.0.1
This notification is sent whenever a cluster alert is generated.
Status: current Access: read-only
NOTIFICATION-TYPE    

wosCompliances 1.3.6.1.4.1.6894.4.1.2.1
OBJECT IDENTIFIER    

wosGroups 1.3.6.1.4.1.6894.4.1.2.2
OBJECT IDENTIFIER    

wosCompliance 1.3.6.1.4.1.6894.4.1.2.1.1
The compliance statement for WOS nodes implementing the DDN-WOS-MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

wosEventsGroup 1.3.6.1.4.1.6894.4.1.2.2.1
This groups defines the set of notification types.
Status: current Access: read-only
NOTIFICATION-GROUP    

wosNotificationsGroup 1.3.6.1.4.1.6894.4.1.2.2.2
This group defines the set of notification objects.
Status: current Access: read-only
OBJECT-GROUP    

wosStatsGroup 1.3.6.1.4.1.6894.4.1.2.2.3
This group defines the set of statistics objects.
Status: current Access: read-only
OBJECT-GROUP    

wosAlertsGroup 1.3.6.1.4.1.6894.4.1.2.2.4
This group defines the set of alert objects.
Status: current Access: read-only
OBJECT-GROUP    

wosClusterGroup 1.3.6.1.4.1.6894.4.1.2.2.5
This group defines the set of cluster objects.
Status: current Access: read-only
OBJECT-GROUP    

wosZonesGroup 1.3.6.1.4.1.6894.4.1.2.2.6
This group defines the set of zone objects.
Status: current Access: read-only
OBJECT-GROUP    

wosNodesGroup 1.3.6.1.4.1.6894.4.1.2.2.7
This group defines the set of node objects.
Status: current Access: read-only
OBJECT-GROUP    

wosPoliciesGroup 1.3.6.1.4.1.6894.4.1.2.2.8
This group defines the set of policy objects.
Status: current Access: read-only
OBJECT-GROUP    

wosPrefsGroup 1.3.6.1.4.1.6894.4.1.2.2.9
This group defines the set of preferences objects.
Status: current Access: read-only
OBJECT-GROUP