DGS3216-L2MGMT-MIB
File:
DGS3216-L2MGMT-MIB.mib (138180 bytes)
Imported modules
Imported symbols
Defined Types
SwL2DevCtrlCFMPortEntry |
|
SEQUENCE |
|
|
|
|
swL2DevCtrlCFMPortIndex |
INTEGER |
|
|
swL2DevCtrlCFMPortState |
INTEGER |
|
SwL2VlanStaticEntry |
|
SEQUENCE |
|
|
|
|
swL2VlanIndex |
VlanId |
|
|
swL2VLANAdvertisement |
INTEGER |
|
SwL2VlanPortInfoEntry |
|
SEQUENCE |
|
|
|
|
swL2VlanPortInfoPortIndex |
INTEGER |
|
|
swL2VlanPortInfoVid |
INTEGER |
|
|
swL2VlanPortInfoPortRole |
INTEGER |
|
SwL2PortInfoEntry |
|
SEQUENCE |
|
|
|
|
swL2PortInfoPortIndex |
INTEGER |
|
|
swL2PortInfoMediumType |
INTEGER |
|
|
swL2PortInfoUnitID |
INTEGER |
|
|
swL2PortInfoType |
INTEGER |
|
|
swL2PortInfoLinkStatus |
INTEGER |
|
|
swL2PortInfoNwayStatus |
INTEGER |
|
|
swL2PortInfoErrorDisabled |
INTEGER |
|
SwL2PortCtrlEntry |
|
SEQUENCE |
|
|
|
|
swL2PortCtrlPortIndex |
INTEGER |
|
|
swL2PortCtrlMediumType |
INTEGER |
|
|
swL2PortCtrlUnitIndex |
INTEGER |
|
|
swL2PortCtrlAdminState |
INTEGER |
|
|
swL2PortCtrlNwayState |
INTEGER |
|
|
swL2PortCtrlFlowCtrlState |
INTEGER |
|
|
swL2PortCtrlLearningState |
INTEGER |
|
|
swL2PortCtrlMACNotifyState |
INTEGER |
|
SwL2PortCounterCtrlEntry |
|
SEQUENCE |
|
|
|
|
swL2PortCounterCtrlPortIndex |
INTEGER |
|
|
swL2PortCounterClearCtrl |
INTEGER |
|
SwL2PortErrEntry |
|
SEQUENCE |
|
|
|
|
swL2PortErrPortIndex |
INTEGER |
|
|
swL2PortErrPortState |
INTEGER |
|
|
swL2PortErrPortConnStatus |
INTEGER |
|
|
swL2PortErrPortReason |
INTEGER |
|
SwL2MulticastFilterProfileEntry |
|
SEQUENCE |
|
|
|
|
swL2MulticastFilterProfileIndex |
INTEGER |
|
|
swL2MulticastFilterProfileName |
DisplayString |
|
|
swL2MulticastFilterStatus |
RowStatus |
|
SwL2MulticastFilterProfileAddressEntry |
|
SEQUENCE |
|
|
|
|
swL2MulticastFilterProfileIdIndex |
INTEGER |
|
|
swL2MulticastFilterFromIp |
IpAddress |
|
|
swL2MulticastFilterToIp |
IpAddress |
|
|
swL2MulticastFilterAddressState |
RowStatus |
|
SwL2LimitedMulticastFilterPortEntry |
|
SEQUENCE |
|
|
|
|
swL2LimitedMulticastFilterPortIndex |
INTEGER |
|
|
swL2LimitedMulticastFilterPortProfileID |
DisplayString |
|
|
swL2LimitedMulticastFilterPortAccess |
INTEGER |
|
|
swL2LimitedMulticastFilterPortProfileStatus |
INTEGER |
|
SwL2MulticastFilterPortMaxGroupEntry |
|
SEQUENCE |
|
|
|
|
swL2MulticastFilterPortMaxGroupPortIndex |
INTEGER |
|
|
swL2MulticastFilterPortMaxGroup |
INTEGER |
|
SwL2QOSBandwidthControlEntry |
|
SEQUENCE |
|
|
|
|
swL2QOSBandwidthPortIndex |
INTEGER |
|
|
swL2QOSBandwidthRxRate |
INTEGER |
|
|
swL2QOSBandwidthTxRate |
INTEGER |
|
|
swL2QOSBandwidthRadiusRxRate |
INTEGER |
|
|
swL2QOSBandwidthRadiusTxRate |
INTEGER |
|
SwL2QOSSchedulingEntry |
|
SEQUENCE |
|
|
|
|
swL2QOSSchedulingClassIndex |
INTEGER |
|
|
swL2QOSSchedulingMaxPkts |
INTEGER |
|
|
swL2QOSSchedulingMechanism |
INTEGER |
|
SwL2QOS8021pUserPriorityEntry |
|
SEQUENCE |
|
|
|
|
swL2QOS8021pUserPriorityIndex |
INTEGER |
|
|
swL2QOS8021pUserPriorityClass |
INTEGER |
|
SwL2QOS8021pDefaultPriorityEntry |
|
SEQUENCE |
|
|
|
|
swL2QOS8021pDefaultPriorityIndex |
INTEGER |
|
|
swL2QOS8021pDefaultPriority |
INTEGER |
|
|
swL2QOS8021pRadiusPriority |
INTEGER |
|
SwL2PortSecurityControlEntry |
|
SEQUENCE |
|
|
|
|
swL2PortSecurityPortIndex |
INTEGER |
|
|
swL2PortSecurityMaxLernAddr |
INTEGER |
|
|
swL2PortSecurityMode |
INTEGER |
|
|
swL2PortSecurityAdmState |
INTEGER |
|
|
swL2PortSecurityEntryClearCtrl |
INTEGER |
|
SwL2DhcpRelayCtrlEntry |
|
SEQUENCE |
|
|
|
|
swL2DhcpRelayCtrlInterfaceName |
DisplayString |
|
|
swL2DhcpRelayCtrlServer |
IpAddress |
|
|
swL2DhcpRelayCtrlState |
INTEGER |
|
SwL2TrunkCtrlEntry |
|
SEQUENCE |
|
|
|
|
swL2TrunkIndex |
INTEGER |
|
|
swL2TrunkMasterPort |
INTEGER |
|
|
swL2TrunkMember |
PortList |
|
|
swL2TrunkType |
INTEGER |
|
|
swL2TrunkState |
RowStatus |
|
|
swL2TrunkActivePort |
PortList |
|
SwL2TrunkLACPPortEntry |
|
SEQUENCE |
|
|
|
|
swL2TrunkLACPPortIndex |
INTEGER |
|
|
swL2TrunkLACPPortState |
INTEGER |
|
SwL2TrunkVLANEntry |
|
SEQUENCE |
|
|
|
|
swL2TrunkVLANPort |
INTEGER |
|
|
swL2TrunkVLANState |
INTEGER |
|
SwL2IGMPCtrlEntry |
|
SEQUENCE |
|
|
|
|
swL2IGMPCtrlVid |
INTEGER |
|
|
swL2IGMPQueryInterval |
INTEGER |
|
|
swL2IGMPMaxResponseTime |
INTEGER |
|
|
swL2IGMPRobustness |
INTEGER |
|
|
swL2IGMPLastMemberQueryInterval |
INTEGER |
|
|
swL2IGMPHostTimeout |
INTEGER |
|
|
swL2IGMPRouteTimeout |
INTEGER |
|
|
swL2IGMPLeaveTimer |
INTEGER |
|
|
swL2IGMPQueryState |
INTEGER |
|
|
swL2IGMPCurrentState |
INTEGER |
|
|
swL2IGMPCtrlState |
INTEGER |
|
|
swL2IGMPFastLeaveState |
INTEGER |
|
|
swL2IGMPQueryVersion |
INTEGER |
|
SwL2IGMPQueryInfoEntry |
|
SEQUENCE |
|
|
|
|
swL2IGMPInfoVid |
INTEGER |
|
|
swL2IGMPInfoQueryCount |
INTEGER |
|
|
swL2IGMPInfoTxQueryCount |
INTEGER |
|
SwL2IGMPRouterPortEntry |
|
SEQUENCE |
|
|
|
|
swL2IGMPRouterPortVlanid |
INTEGER |
|
|
swL2IGMPRouterPortVlanName |
DisplayString |
|
|
swL2IGMPRouterPortStaticPortList |
PortList |
|
|
swL2IGMPRouterPortDynamicPortList |
PortList |
|
|
swL2IGMPRouterPortForbiddenPortList |
PortList |
|
SwIGMPSnoopingGroupEntry |
|
SEQUENCE |
|
|
|
|
swIGMPSnoopingGroupVid |
INTEGER |
|
|
swIGMPSnoopingGroupGroupAddr |
IpAddress |
|
|
swIGMPSnoopingGroupSourceAddr |
IpAddress |
|
|
swIGMPSnoopingGroupIncludePortMap |
PortList |
|
|
swIGMPSnoopingGroupExcludePortMap |
PortList |
|
|
swIGMPSnoopingGroupReportCount |
INTEGER |
|
|
swIGMPSnoopingGroupUpTime |
TimeTicks |
|
|
swIGMPSnoopingGroupExpiryTime |
TimeTicks |
|
|
swIGMPSnoopingGroupRouterPorts |
PortList |
|
SwL2IGMPDynIPMultCtrlEntry |
|
SEQUENCE |
|
|
|
|
swL2IGMPDynIPMultVlanState |
INTEGER |
|
|
swL2IGMPDynIPMultVlanAge |
INTEGER |
|
SwL2IGMPAccessAuthEntry |
|
SEQUENCE |
|
|
|
|
swL2IGMPAccessAuthPort |
INTEGER |
|
|
swL2IGMPAccessAuthState |
INTEGER |
|
SwL2TrafficSegEntry |
|
SEQUENCE |
|
|
|
|
swL2TrafficSegPort |
INTEGER |
|
|
swL2TrafficSegForwardPorts |
PortList |
|
SwL2MulticastFilterModeVlanEntry |
|
SEQUENCE |
|
|
|
|
swL2MulticastFilterVid |
INTEGER |
|
|
swL2MulticastFilterVlanMode |
INTEGER |
|
SwL2LoopDetectPortEntry |
|
SEQUENCE |
|
|
|
|
swL2LoopDetectPortIndex |
INTEGER |
|
|
swL2LoopDetectPortState |
INTEGER |
|
|
swL2LoopDetectPortLoopVLAN |
DisplayString |
|
|
swL2LoopDetectPortLoopStatus |
INTEGER |
|
SwL2DhcpLocalRelayVLANEntry |
|
SEQUENCE |
|
|
|
|
swL2DhcpLocalRelayVLANID |
INTEGER |
|
|
swL2DhcpLocalRelayVLANState |
INTEGER |
|
Defined Values
swL2MgmtMIB |
1.3.6.1.4.1.171.11.101.2.2 |
The Structure of Layer 2 Network Management Information. |
MODULE-IDENTITY |
|
|
|
swL2DevMgmt |
1.3.6.1.4.1.171.11.101.2.2.1 |
OBJECT IDENTIFIER |
|
|
|
swL2QOSMgmt |
1.3.6.1.4.1.171.11.101.2.2.6 |
OBJECT IDENTIFIER |
|
|
|
swL2IGMPMgmt |
1.3.6.1.4.1.171.11.101.2.2.11 |
OBJECT IDENTIFIER |
|
|
|
swL2DevInfo |
1.3.6.1.4.1.171.11.101.2.2.1.1 |
OBJECT IDENTIFIER |
|
|
|
swDevInfoTotalNumOfPort |
1.3.6.1.4.1.171.11.101.2.2.1.1.1 |
The number of ports within this switch. This value is the sum
of the ports within this switch. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swDevInfoNumOfPortInUse |
1.3.6.1.4.1.171.11.101.2.2.1.1.2 |
The number of ports in this switch connected to the segment or
the end stations. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swDevInfoFrontPanelLedStatus |
1.3.6.1.4.1.171.11.101.2.2.1.1.4 |
This object is a set of system LED indications.
The first four octets are defined as system LED. The first two
octets are currently unused and must be set to zero. The third
octet indicates the power LED. The fourth octet indicates the
console LED. The fifth LED is RPS (Redundancy Power Supply) LED.
The other octets are the logical port LED. Every two bytes are
presented to a port. The first byte is presented as the Link/Activity
LED. The second byte is presented as the Speed LED.
System LED:
01 = fail/error/non existence.
02 = work normal
Link/Activity LED :
The most significant bit is used for blink/solid:
8 = The LED blinks.
The second most significant bit is used for link status:
1 = link fail.
2 = link pass.
Speed LED :
01 = 10Mbps.
02 = 100Mbps.
03 = 1000Mbps.
The four remaining bits are currently unused and must be 0. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..127) |
|
swL2DevCtrl |
1.3.6.1.4.1.171.11.101.2.2.1.2 |
OBJECT IDENTIFIER |
|
|
|
swL2DevCtrlStpState |
1.3.6.1.4.1.171.11.101.2.2.1.2.1 |
This object can enable or disable the spanning tree algorithm during
the runtime of the system. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2DevCtrlIGMPSnooping |
1.3.6.1.4.1.171.11.101.2.2.1.2.2 |
This object indicates if the layer 2 Internet Group Management
Protocol (IGMP) capture function is enabled or disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2DevCtrlRmonState |
1.3.6.1.4.1.171.11.101.2.2.1.2.4 |
This object can enable or disable RMON. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2DevCtrlSnmpTrapState |
1.3.6.1.4.1.171.11.101.2.2.1.2.5 |
This object controls the SNMP trap status. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2DevCtrlCleanAllStatisticCounter |
1.3.6.1.4.1.171.11.101.2.2.1.2.6 |
When the object is set to active, all statistical counters will
be cleared. If set to normal, no action. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
normal(1), active(2) |
|
swL2DevCtrlVlanIdOfFDBTbl |
1.3.6.1.4.1.171.11.101.2.2.1.2.7 |
Indicates the VLAN ID to which the Dot1dTpFdbTable belongs;
The default value is DEFAULT_VLAN_ID of the system. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
VlanId |
|
|
swL2MACNotifyState |
1.3.6.1.4.1.171.11.101.2.2.1.2.8 |
This object can enable or disable MAC Notification. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2MACNotifyHistorySize |
1.3.6.1.4.1.171.11.101.2.2.1.2.9 |
This object indicates the history size of MAC addresses in the MAC Address table.
The default value is 1 . |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..500 |
|
swL2MACNotifyInterval |
1.3.6.1.4.1.171.11.101.2.2.1.2.10 |
This object indicates the time interval, in seconds, which will trigger
MAC notification messages. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..2147483647 |
|
swL2DevCtrlVLANTrunkState |
1.3.6.1.4.1.171.11.101.2.2.1.2.22 |
This indicates the global state of the VLAN trunking feature of the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2DevCtrlTelnetState |
1.3.6.1.4.1.171.11.101.2.2.1.2.14.1 |
This object controls the Telnet status. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2DevCtrlTelnetTcpPort |
1.3.6.1.4.1.171.11.101.2.2.1.2.14.2 |
This object designates TCP ports.
When Telnet is disabled, this object is not accessible. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
swL2DevCtrlManagementVlanId |
1.3.6.1.4.1.171.11.101.2.2.1.2.16 |
This object controls which previously created VLANs are included
in the System IP Interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
VlanId |
|
|
swL2DevCtrlWebState |
1.3.6.1.4.1.171.11.101.2.2.1.2.17.1 |
This object controls the Web status. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2DevCtrlWebTcpPort |
1.3.6.1.4.1.171.11.101.2.2.1.2.17.2 |
This object designates TCP ports.
When Web is disabled, this object is not accessible. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
swL2DevCtrlLLDPState |
1.3.6.1.4.1.171.11.101.2.2.1.2.18 |
Specifies the state of the LLDP function.
When this function is enabled, the switch can start to transmit
LLDP packets and receive and process the LLDP packets.
The specific function of each port will depend on the per port
LLDP setting.
For the advertisement of LLDP packets, the switch announces the
information to its neighbor through ports. For the receiving of
LLDP packets, the switch will learn the information from the LLDP
packets advertised from the neighbor in the neighbor table.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2DevCtrlLLDPForwardMessageState |
1.3.6.1.4.1.171.11.101.2.2.1.2.19 |
When lldp is disabled and lldp forward_message is enabled, the received
LLDP Data Unit packets will be forwarded. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2DevCtrlIpAutoconfig |
1.3.6.1.4.1.171.11.101.2.2.1.2.20 |
This object controls the IP auto configuration state. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2DevCtrlCFMState |
1.3.6.1.4.1.171.11.101.2.2.1.2.21.1 |
This object indicates the CFM global state. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2DevCtrlCFMPortEntry |
1.3.6.1.4.1.171.11.101.2.2.1.2.21.2.1 |
The entry of the CFM state on specified ports. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2DevCtrlCFMPortEntry |
|
|
swL2DevCtrlCFMPortIndex |
1.3.6.1.4.1.171.11.101.2.2.1.2.21.2.1.1 |
This object indicates the port number. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
swL2DevCtrlCFMPortState |
1.3.6.1.4.1.171.11.101.2.2.1.2.21.2.1.2 |
This object indicates the CFM state by port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2DevAlarm |
1.3.6.1.4.1.171.11.101.2.2.1.3 |
OBJECT IDENTIFIER |
|
|
|
swL2DevAlarmNewRoot |
1.3.6.1.4.1.171.11.101.2.2.1.3.1 |
When the device has become the new root of the Spanning Tree,
this object decides whether to send a new root trap. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2DevAlarmTopologyChange |
1.3.6.1.4.1.171.11.101.2.2.1.3.2 |
This object determines whether or not to send a trap message when
the switch topology changes. If the object is enabled(3), the topologyChange
trap is sent by the device when any of its configured ports transitions from
the Learning state to the Forwarding state, or from the Forwarding state to
the Blocking state. For the same port transition, the device does not send the
trap if this object value is disabled or other. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2DevAlarmLinkChange |
1.3.6.1.4.1.171.11.101.2.2.1.3.3 |
This object determines whether or not to send a trap message when the link
was changed. If the object is enabled(3), the Link Change trap is sent by
the device when any of its ports link change. The device does not send the
trap if this object value is disabled or other. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2VlanStaticTable |
1.3.6.1.4.1.171.11.101.2.2.2.1 |
A table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL2VlanStaticEntry |
|
swL2VlanStaticEntry |
1.3.6.1.4.1.171.11.101.2.2.2.1.1 |
Static information for a VLAN configured into the
device by (local or network) management. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2VlanStaticEntry |
|
|
swL2VlanIndex |
1.3.6.1.4.1.171.11.101.2.2.2.1.1.1 |
The VLAN-ID or other identifier referring to this VLAN. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VlanId |
|
|
swL2VLANAdvertisement |
1.3.6.1.4.1.171.11.101.2.2.2.1.1.2 |
This object indicates if the advertisement is active or not. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2PVIDAutoAssignmentState |
1.3.6.1.4.1.171.11.101.2.2.2.2 |
This object controls the PVID auto assigment state.
If 'Auto-assign PVID' is disabled, PVID only be changed
by PVID configuration (user changes explicitly). The VLAN
configuration will not automatically change PVID.
If 'Auto-assign PVID' is enabled, PVID will be possibly
changed by PVID or VLAN configuration. When user configures
a port to VLAN X's untagged membership, this port's PVID
will be updated with VLAN X. In the form of VLAN list command,
PVID is updated with last item of VLAN list. When user removes
a port from the untagged membership of the PVID's VLAN, the
port's PVID will be assigned with 'default VLAN'. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2VlanPortInfoEntry |
1.3.6.1.4.1.171.11.101.2.2.2.3.1 |
The table entry of vlan port information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2VlanPortInfoEntry |
|
|
swL2VlanPortInfoPortIndex |
1.3.6.1.4.1.171.11.101.2.2.2.3.1.1 |
The port index. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2VlanPortInfoVid |
1.3.6.1.4.1.171.11.101.2.2.2.3.1.2 |
The VLAN-ID assigned to a special port |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2VlanPortInfoPortRole |
1.3.6.1.4.1.171.11.101.2.2.2.3.1.3 |
The port role of a special port.when none,it means this port is not belong to the vlan. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), untagged(2), tagged(3), dynamic(4), forbidden(5) |
|
swL2PortInfoTable |
1.3.6.1.4.1.171.11.101.2.2.3.1 |
A table that contains information about every port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL2PortInfoEntry |
|
swL2PortInfoEntry |
1.3.6.1.4.1.171.11.101.2.2.3.1.1 |
A list of information for each port of the device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2PortInfoEntry |
|
|
swL2PortInfoPortIndex |
1.3.6.1.4.1.171.11.101.2.2.3.1.1.1 |
This object indicates the module's port number.(1..Max port
number in the module) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2PortInfoMediumType |
1.3.6.1.4.1.171.11.101.2.2.3.1.1.2 |
Indicates medium type of the port number. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
copper(1), fiber(2) |
|
swL2PortInfoUnitID |
1.3.6.1.4.1.171.11.101.2.2.3.1.1.3 |
Indicates ID of the unit in the system |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2PortInfoType |
1.3.6.1.4.1.171.11.101.2.2.3.1.1.4 |
This object indicates the connector type of this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
portType-none(0), portType-100Base-T(2), portType-100Base-X(3), portType-1000Base-T(4), portType-1000Base-X(5), portType-10GBase-R(6), portType-10GBase-CX4(7), portType-SIO(8), portType-module-empty(9), portType-user-last(10) |
|
swL2PortInfoLinkStatus |
1.3.6.1.4.1.171.11.101.2.2.3.1.1.5 |
This object indicates the port link status. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), link-pass(2), link-fail(3) |
|
swL2PortInfoNwayStatus |
1.3.6.1.4.1.171.11.101.2.2.3.1.1.6 |
This object indicates the port speed and duplex mode. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
link-down(0), full-10Mbps-8023x(1), full-10Mbps-none(2), half-10Mbps-backp(3), half-10Mbps-none(4), full-100Mbps-8023x(5), full-100Mbps-none(6), half-100Mbps-backp(7), half-100Mbps-none(8), full-1Gigabps-8023x(9), full-1Gigabps-none(10), half-1Gigabps-backp(11), half-1Gigabps-none(12), full-10Gigabps-8023x(13), full-10Gigabps-none(14), half-10Gigabps-8023x(15), half-10Gigabps-none(16), empty(17), err-disabled(18) |
|
swL2PortInfoErrorDisabled |
1.3.6.1.4.1.171.11.101.2.2.3.1.1.8 |
This object indicates the blocking type of this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(0), storm(1), lbd(2), unknow(3), power-saving(7) |
|
swL2PortCtrlTable |
1.3.6.1.4.1.171.11.101.2.2.3.2 |
A table that contains control information about every port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL2PortCtrlEntry |
|
swL2PortCtrlEntry |
1.3.6.1.4.1.171.11.101.2.2.3.2.1 |
A list of control information for each port of the device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2PortCtrlEntry |
|
|
swL2PortCtrlPortIndex |
1.3.6.1.4.1.171.11.101.2.2.3.2.1.1 |
This object indicates the module's port number.(1..Max port
number in the module) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2PortCtrlMediumType |
1.3.6.1.4.1.171.11.101.2.2.3.2.1.2 |
Indicates medium type of the port number. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
copper(1), fiber(2) |
|
swL2PortCtrlUnitIndex |
1.3.6.1.4.1.171.11.101.2.2.3.2.1.3 |
Indicates ID of the unit in the device |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2PortCtrlAdminState |
1.3.6.1.4.1.171.11.101.2.2.3.2.1.4 |
This object decides if the port is enabled or disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2PortCtrlNwayState |
1.3.6.1.4.1.171.11.101.2.2.3.2.1.5 |
Chose the port speed, duplex mode, and N-Way function mode. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Full-master(9), nway-disabled-1Gigabps-Full-slave(10) |
|
swL2PortCtrlFlowCtrlState |
1.3.6.1.4.1.171.11.101.2.2.3.2.1.6 |
The flow control mechanism is different between full duplex
mode and half duplex mode. For half duplex mode, the jamming
signal is asserted. For full duplex mode, IEEE 802.3x flow
control function sends PAUSE frames and receives PAUSE frames. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2PortCtrlLearningState |
1.3.6.1.4.1.171.11.101.2.2.3.2.1.7 |
This object decides if the port is locked or not. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2PortCtrlMACNotifyState |
1.3.6.1.4.1.171.11.101.2.2.3.2.1.8 |
This object sets each port's MAC notification state. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2PortCtrlJumboFrame |
1.3.6.1.4.1.171.11.101.2.2.3.3 |
This object configures the switch's jumbo frame settings. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2PortCtrlJumboFrameMaxSize |
1.3.6.1.4.1.171.11.101.2.2.3.4 |
This object describes how many bytes the max jumbo frame is. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
swL2PortCounterCtrlEntry |
1.3.6.1.4.1.171.11.101.2.2.3.6.1 |
A list of entry used to clear counter information for each port of the device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2PortCounterCtrlEntry |
|
|
swL2PortCounterCtrlPortIndex |
1.3.6.1.4.1.171.11.101.2.2.3.6.1.1 |
This object indicates the module's port number.(1..Max port
number in the module) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2PortCounterClearCtrl |
1.3.6.1.4.1.171.11.101.2.2.3.6.1.2 |
This object indicates if to clear the counters for each port of the device or not. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), start(2) |
|
swL2PortErrTable |
1.3.6.1.4.1.171.11.101.2.2.3.7 |
A table that contains error information for each port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL2PortErrEntry |
|
swL2PortErrEntry |
1.3.6.1.4.1.171.11.101.2.2.3.7.1 |
A list of information regarding port errors on the device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2PortErrEntry |
|
|
swL2PortErrPortIndex |
1.3.6.1.4.1.171.11.101.2.2.3.7.1.1 |
This object indicates the module's port number.(1..Max port number in
the module). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2PortErrPortState |
1.3.6.1.4.1.171.11.101.2.2.3.7.1.2 |
This object indicates the port state is enabled or disabled. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2PortErrPortConnStatus |
1.3.6.1.4.1.171.11.101.2.2.3.7.1.3 |
This object indicates whether the PortStatus is err-disabled or not. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), err-disabled(2) |
|
swL2PortErrPortReason |
1.3.6.1.4.1.171.11.101.2.2.3.7.1.4 |
This object describes if the reason for the port error is STP LBD or Storm control. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
stp-lbd(1), storm-control(2), ctp-lbd(3), power-saving(7) |
|
swL2MulticastFilterProfileEntry |
1.3.6.1.4.1.171.11.101.2.2.5.1.1 |
A list of multicast filter address information for each profile ID. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2MulticastFilterProfileEntry |
|
|
swL2MulticastFilterProfileIndex |
1.3.6.1.4.1.171.11.101.2.2.5.1.1.1 |
Indicates index for each profile. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..24 |
|
swL2MulticastFilterProfileAddressEntry |
1.3.6.1.4.1.171.11.101.2.2.5.2.1 |
A list of multicast filter address information for each profile ID. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2MulticastFilterProfileAddressEntry |
|
|
swL2MulticastFilterFromIp |
1.3.6.1.4.1.171.11.101.2.2.5.2.1.2 |
Specifies the head IP address of a multicast address range which will
be binded to a multicast filter profile. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
swL2MulticastFilterToIp |
1.3.6.1.4.1.171.11.101.2.2.5.2.1.3 |
Specifies the tail IP address of a multicast address range which will
be binded to a multicast filter profile. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
swL2MulticastFilterAddressState |
1.3.6.1.4.1.171.11.101.2.2.5.2.1.4 |
This object indicates the status of this entry.
Setting value to createAndGo(4) will add the multicast address list specified in
swL2MulticastFilterFromIp and swL2MulticastFilterToIp to multicast filter profile.
Setting value to destroy(6) will remove the multicast address list specified in
swL2MulticastFilterFromIp and swL2MulticastFilterToIp from multicast filter profile. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
swL2LimitedMulticastFilterPortEntry |
1.3.6.1.4.1.171.11.101.2.2.5.3.1 |
A list of information that used to bind port to profile id. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2LimitedMulticastFilterPortEntry |
|
|
swL2LimitedMulticastFilterPortAccess |
1.3.6.1.4.1.171.11.101.2.2.5.3.1.2 |
This object indicates the access status for each port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
permit(1), deny(2) |
|
swL2LimitedMulticastFilterPortProfileStatus |
1.3.6.1.4.1.171.11.101.2.2.5.3.1.4 |
Controls the multicast filter profile list which bind to each port.
When set add(2), multicast filter profile ID list which specifies in
swL2LimitedMulticastFilterPortProfileID will be bound to the port.
When set delete(3), multicast filter profile ID list which specifies in
swL2LimitedMulticastFilterPortProfileID will be unbound from the port.
The attribute value reverts to 'other' once the action has been done. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), add(2), delete(3) |
|
swL2MulticastFilterPortMaxGroupEntry |
1.3.6.1.4.1.171.11.101.2.2.5.4.1 |
A list of max group number information for each port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2MulticastFilterPortMaxGroupEntry |
|
|
swL2MulticastFilterPortMaxGroup |
1.3.6.1.4.1.171.11.101.2.2.5.4.1.2 |
Specifies maximum multicast filter group numbers for each port.
Default value is 256. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..256 |
|
swL2QOSBandwidthControlEntry |
1.3.6.1.4.1.171.11.101.2.2.6.1.1 |
A list of information contained in the swL2QOSBandwidthControlTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2QOSBandwidthControlEntry |
|
|
swL2QOSBandwidthPortIndex |
1.3.6.1.4.1.171.11.101.2.2.6.1.1.1 |
Indicates the port . |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..768 |
|
swL2QOSBandwidthRxRate |
1.3.6.1.4.1.171.11.101.2.2.6.1.1.2 |
Indicates RX Rate(64Kbit/sec) of the specified port. Value 1024001 means no limit. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
64..1024001 |
|
swL2QOSBandwidthTxRate |
1.3.6.1.4.1.171.11.101.2.2.6.1.1.3 |
Indicates TX Rate(64Kbit/sec) of the specified port. Value 1024001 means no limit. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
64..1024001 |
|
swL2QOSBandwidthRadiusRxRate |
1.3.6.1.4.1.171.11.101.2.2.6.1.1.4 |
The RxRate value comes from RADIUS server,
If an 802.1X port is authenticated, this value
will overwrites the locally configured RxRate. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
swL2QOSBandwidthRadiusTxRate |
1.3.6.1.4.1.171.11.101.2.2.6.1.1.5 |
The TxRate value comes from RADIUS server,
If an 802.1X port is authenticated, this value
will overwrites the locally configured TxRate. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
swL2QOSSchedulingEntry |
1.3.6.1.4.1.171.11.101.2.2.6.2.1 |
A list of information contained in the swL2QOSSchedulingTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2QOSSchedulingEntry |
|
|
swL2QOSSchedulingClassIndex |
1.3.6.1.4.1.171.11.101.2.2.6.2.1.1 |
Indicates the hardware queue number. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
swL2QOSSchedulingMaxPkts |
1.3.6.1.4.1.171.11.101.2.2.6.2.1.2 |
Indicates the maximum number of packets the hardware priority queue will be allowed
to transmit before allowing the next lowest priority queue to transmit its packets.
a value between 0 and 15 can be specified. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
swL2QOSSchedulingMechanism |
1.3.6.1.4.1.171.11.101.2.2.6.2.1.3 |
Indicates the mechanism of QoS scheduling. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
strict(1), roundrobin(2), weightfair(3) |
|
swL2QOS8021pUserPriorityEntry |
1.3.6.1.4.1.171.11.101.2.2.6.3.1 |
A list of information contained in the swL2QOS8021pUserPriorityTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2QOS8021pUserPriorityEntry |
|
|
swL2QOS8021pUserPriorityIndex |
1.3.6.1.4.1.171.11.101.2.2.6.3.1.1 |
The 802.1p user priority . |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
swL2QOS8021pUserPriorityClass |
1.3.6.1.4.1.171.11.101.2.2.6.3.1.2 |
The number of the switch's hardware priority queue. The switch has seven hardware
priority queues available. They are numbered between 0 (the lowest priority)
and 6 (the highest priority). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
swL2QOS8021pDefaultPriorityEntry |
1.3.6.1.4.1.171.11.101.2.2.6.4.1 |
A list of information contained in the swL2QOS8021pDefaultPriorityTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2QOS8021pDefaultPriorityEntry |
|
|
swL2QOS8021pDefaultPriority |
1.3.6.1.4.1.171.11.101.2.2.6.4.1.2 |
The priority value to assign to untagged packets received by the
switch ports on the switch.. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
swL2QOS8021pRadiusPriority |
1.3.6.1.4.1.171.11.101.2.2.6.4.1.3 |
The value of 802.1p comes from RADIUS server.
If an 802.1X port is authenticated, this value
will overwrite the local configured value. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
swL2QOSSchedulingMechanismCtrl |
1.3.6.1.4.1.171.11.101.2.2.6.5 |
This object controls QoS scheduling Mechanism. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
strict(1), roundrobin(2), weightfair(3) |
|
swL2PortSecurityControlTable |
1.3.6.1.4.1.171.11.101.2.2.7.1 |
A port security feature which controls the address leaning capability and
traffic forwarding decisions. Each port can be enabled or disabled for this function.
When it is enabled and a number is given said N, which allows N addresses to be
learned on this port, the first N learned addresses are locked at this port as
static entries. When the learned addresses number reaches N, any incoming packet
without learned source addresses are discarded (e.g. dropped) and no more new
addresses can be learned on this port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL2PortSecurityControlEntry |
|
swL2PortSecurityControlEntry |
1.3.6.1.4.1.171.11.101.2.2.7.1.1 |
A list of information contained in the swL2PortSecurityControlTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2PortSecurityControlEntry |
|
|
swL2PortSecurityPortIndex |
1.3.6.1.4.1.171.11.101.2.2.7.1.1.1 |
Indicates the secured port to lock address learning. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..768 |
|
swL2PortSecurityMaxLernAddr |
1.3.6.1.4.1.171.11.101.2.2.7.1.1.2 |
Indicates allowable number of addresses to be learned on this port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..64 |
|
swL2PortSecurityMode |
1.3.6.1.4.1.171.11.101.2.2.7.1.1.3 |
Indicates the mode of locking address.
In deleteOnTimeout(3) mode - the locked addresses can be aged out after
the aging timer expires. In this mode, when the locked address is aged
out, the number of addresses that can be learned has to be increased by one.
In deleteOnReset(4) mode - Locked addresses never age out unless the system
restarts which will prevent port movement or intrusion. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), permanent(2), deleteOnTimeout(3), deleteOnReset(4) |
|
swL2PortSecurityAdmState |
1.3.6.1.4.1.171.11.101.2.2.7.1.1.4 |
Indicates administration state of locking address. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), enable(2), disable(3) |
|
swL2PortSecurityEntryClearCtrl |
1.3.6.1.4.1.171.11.101.2.2.7.1.1.5 |
Used to clear port security entries by port.
Setting this value to 'start' will execute the clear action,
Once cleared, the value returns to 'other'. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), start(2) |
|
swL2PortSecurityDelPort |
1.3.6.1.4.1.171.11.101.2.2.7.2.2 |
Indicates the port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..768 |
|
swL2PortSecurityDelActivity |
1.3.6.1.4.1.171.11.101.2.2.7.2.4 |
. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), start(2) |
|
swL2PortSecurityTrapLogState |
1.3.6.1.4.1.171.11.101.2.2.7.3 |
When enabled(2),whenever there's a new MAC address that violates
the pre-defined port security configuration, traps will be sent out
and the relevant information will be logged into the system. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), enable(2), disable(3) |
|
swL2DhcpRelayState |
1.3.6.1.4.1.171.11.101.2.2.8.1 |
This object indicates if the DHCP relay function is enabled or
disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2DhcpRelayHopCount |
1.3.6.1.4.1.171.11.101.2.2.8.2 |
This object indicates the maximum number of router hops that
DHCP packets can cross. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..16 |
|
swL2DhcpRelayTimeThreshold |
1.3.6.1.4.1.171.11.101.2.2.8.3 |
This object indicates the minimum time in seconds within which
the switch must relay the DHCP request. If this time is
exceeded, the switch will drop the DHCP packet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2DhcpRelayOption82State |
1.3.6.1.4.1.171.11.101.2.2.8.4 |
This object indicates if the DHCP relay agent information option 82
function is enabled or disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2DhcpRelayOption82Check |
1.3.6.1.4.1.171.11.101.2.2.8.5 |
This object indicates if the checking mechanism of DHCP relay agent
information option 82 is enabled or disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2DhcpRelayOption82Policy |
1.3.6.1.4.1.171.11.101.2.2.8.6 |
This object indicates the reforwarding policy of DHCP relay agent
information option 82.
replace(1) - replace the exiting option 82 field in messages.
drop(2) - discard messages with existing option 82 field.
keep(3) - retain the existing option 82 field messages. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
replace(1), drop(2), keep(3) |
|
swL2DhcpRelayCtrlTable |
1.3.6.1.4.1.171.11.101.2.2.8.7 |
This table specifies the IP address as a destination to forward
(relay) DHCP packets to. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL2DhcpRelayCtrlEntry |
|
swL2DhcpRelayCtrlEntry |
1.3.6.1.4.1.171.11.101.2.2.8.7.1 |
A list of information that specifies the IP address as a destination
to forward (relay) DHCP packets to. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2DhcpRelayCtrlEntry |
|
|
swL2DhcpRelayCtrlState |
1.3.6.1.4.1.171.11.101.2.2.8.7.1.3 |
This object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry resides in the table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), invalid(2), valid(3) |
|
swL2TrunkMaxSupportedEntries |
1.3.6.1.4.1.171.11.101.2.2.9.1 |
Maximum number of entries in the trunk configuration table
(swL2TrunkCtrlTable). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..5 |
|
swL2TrunkCurrentNumEntries |
1.3.6.1.4.1.171.11.101.2.2.9.2 |
Current active number of entries in the trunk configuration
table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2TrunkCtrlTable |
1.3.6.1.4.1.171.11.101.2.2.9.3 |
This table specifies which ports group a set of ports(up to 8)
into a single logical link. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL2TrunkCtrlEntry |
|
swL2TrunkCtrlEntry |
1.3.6.1.4.1.171.11.101.2.2.9.3.1 |
A list of information that specifies which ports group a set of
ports(up to 8) into a single logical link. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2TrunkCtrlEntry |
|
|
swL2TrunkIndex |
1.3.6.1.4.1.171.11.101.2.2.9.3.1.1 |
The index number of the logical port trunk group. The trunk group
number depends on the existence of unit and module. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..5 |
|
swL2TrunkMasterPort |
1.3.6.1.4.1.171.11.101.2.2.9.3.1.3 |
The object indicates the master port number of the port trunk
entry. When using Port Trunk, you cannot configure the other
ports of the group except the master port.
Their configuration must be same as the master port (e.g. speed,
duplex, enabled/disabled, flow control, and so on). |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
swL2TrunkMember |
1.3.6.1.4.1.171.11.101.2.2.9.3.1.4 |
Indicates the number of ports included in this Trunk group.
The trunk port number depends on the existence of the module.
The maximum number of ports is 8 for one trunk group. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
PortList |
|
|
swL2TrunkType |
1.3.6.1.4.1.171.11.101.2.2.9.3.1.6 |
This object indicates the type of trunk group.
static : is static trunk group
lacp : is LACP trunk group . |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), static(2), lacp(3) |
|
swL2TrunkState |
1.3.6.1.4.1.171.11.101.2.2.9.3.1.7 |
This object indicates the status of this entry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
swL2TrunkActivePort |
1.3.6.1.4.1.171.11.101.2.2.9.3.1.8 |
The object indicates the active port of a special trunk group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PortList |
|
|
swL2TrunkAlgorithm |
1.3.6.1.4.1.171.11.101.2.2.9.4 |
This object configures to part of the packet examined by the
switch when selecting the egress port for transmitting
load-sharing data. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), mac-source-dest(4), ip-source-dest(7) |
|
swL2TrunkLACPPortTable |
1.3.6.1.4.1.171.11.101.2.2.9.5 |
This table specifies which ports group a set of ports(up to 8)
into a single logical link. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL2TrunkLACPPortEntry |
|
swL2TrunkLACPPortEntry |
1.3.6.1.4.1.171.11.101.2.2.9.5.1 |
A list of information specifies which ports group a set of
ports(up to 8) into a single logical link. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2TrunkLACPPortEntry |
|
|
swL2TrunkLACPPortIndex |
1.3.6.1.4.1.171.11.101.2.2.9.5.1.1 |
The index of logical port LACP. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2TrunkLACPPortState |
1.3.6.1.4.1.171.11.101.2.2.9.5.1.2 |
The state of logical port LACP. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), passive(2) |
|
swL2TrunkVLANTable |
1.3.6.1.4.1.171.11.101.2.2.9.6 |
This table is used to manage the VLAN trunking feature of the device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL2TrunkVLANEntry |
|
swL2TrunkVLANEntry |
1.3.6.1.4.1.171.11.101.2.2.9.6.1 |
This object is used to configure the VLAN trunking settings for each port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2TrunkVLANEntry |
|
|
swL2TrunkVLANPort |
1.3.6.1.4.1.171.11.101.2.2.9.6.1.1 |
This object indicates the port being configured. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2TrunkVLANState |
1.3.6.1.4.1.171.11.101.2.2.9.6.1.2 |
The state of the logical port LACP. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2MirrorLogicTargetPort |
1.3.6.1.4.1.171.11.101.2.2.10.1 |
This object indicates which switch port will sniff another
port. A trunk port member cannot be configured as a target
snooping port. The port number is the sequential (logical)
number which is also applied to the bridge MIB, etc. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2MirrorPortSourceIngress |
1.3.6.1.4.1.171.11.101.2.2.10.2 |
This represents the port where ingress packets will be sniffed. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
PortList |
|
|
swL2MirrorPortSourceEgress |
1.3.6.1.4.1.171.11.101.2.2.10.3 |
This represents the port where egress packets will be sniffed. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
PortList |
|
|
swL2MirrorPortState |
1.3.6.1.4.1.171.11.101.2.2.10.4 |
This object indicates the port mirroring state.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of the
following values.
disabled(2) - After writing this value to the object, the
corresponding entry will be removed from the table.
enabled(3) - This entry resides in the table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2IGMPMaxSupportedVlans |
1.3.6.1.4.1.171.11.101.2.2.11.1 |
Maximum number of VLANs in the layer 2 IGMP control table
(swL2IGMPCtrlTable). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2IGMPMaxIpGroupNumPerVlan |
1.3.6.1.4.1.171.11.101.2.2.11.2 |
Maximum number of multicast IP groups per VLAN in the layer 2
IGMP information table(swL2IGMPQueryInfoTable). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2IGMPCtrlTable |
1.3.6.1.4.1.171.11.101.2.2.11.3 |
The table controls the VLAN's IGMP function. Its scale depends
on the current VLAN state (swL2VlanInfoStatus). If the VLAN is disabled,
there is only one entry in the table, with an index of 1. If the
VLAN is in Port-Base or 802.1q mode, the maximum number of entries can be 12,
with an index range from 1 to 12. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL2IGMPCtrlEntry |
|
swL2IGMPCtrlEntry |
1.3.6.1.4.1.171.11.101.2.2.11.3.1 |
The entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2IGMPCtrlEntry |
|
|
swL2IGMPCtrlVid |
1.3.6.1.4.1.171.11.101.2.2.11.3.1.1 |
This object indicates the IGMP control entry's VLAN ID. If the VLAN
is disabled, the VID is always 0 and cannot be changed by management users.
If the VLAN is in Port-Base mode, the VID is arranged from 1 to 12, in a
fixed form. If the VLAN is in 802.1q mode, the VID setting can be changed
from 1 to 4094 by the management user, and the VID in each entry must be
unique within the IGMP Control Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2IGMPQueryInterval |
1.3.6.1.4.1.171.11.101.2.2.11.3.1.2 |
The frequency at which IGMP Host-Query packets are
transmitted on this switch. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
swL2IGMPMaxResponseTime |
1.3.6.1.4.1.171.11.101.2.2.11.3.1.3 |
The maximum query response time on this switch. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..25 |
|
swL2IGMPRobustness |
1.3.6.1.4.1.171.11.101.2.2.11.3.1.4 |
The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP is
robust to (Robustness Variable-1) packet losses. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..255 |
|
swL2IGMPLastMemberQueryInterval |
1.3.6.1.4.1.171.11.101.2.2.11.3.1.5 |
The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group-Specific Query messages. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..25 |
|
swL2IGMPHostTimeout |
1.3.6.1.4.1.171.11.101.2.2.11.3.1.6 |
The timer value for sending IGMP query packets when none were
sent by the host on the LAN. The timer works on a per-VLAN basis.
Our device will be activated to send the query messages if the
timer expires. Please reference RFC2236-1997. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..16711450 |
|
swL2IGMPRouteTimeout |
1.3.6.1.4.1.171.11.101.2.2.11.3.1.7 |
The Router Timeout is how long a host must wait after hearing
a Query before it may send any IGMPv2 messages. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..16711450 |
|
swL2IGMPLeaveTimer |
1.3.6.1.4.1.171.11.101.2.2.11.3.1.8 |
When a querier receives a Leave Group message for a group that
has group members on the reception interface, it sends
Group-Specific Queries every swL2IGMPLeaveTimer to the group
being left. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..16711450 |
|
swL2IGMPQueryState |
1.3.6.1.4.1.171.11.101.2.2.11.3.1.9 |
This object decides if the IGMP query is enabled or disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2IGMPCurrentState |
1.3.6.1.4.1.171.11.101.2.2.11.3.1.10 |
This object indicates the current IGMP query state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), querier(2), non-querier(3) |
|
swL2IGMPCtrlState |
1.3.6.1.4.1.171.11.101.2.2.11.3.1.11 |
This object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disable(2) - IGMP function is disabled for this entry.
enable(3) - IGMP function is enabled for this entry. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disable(2), enable(3) |
|
swL2IGMPFastLeaveState |
1.3.6.1.4.1.171.11.101.2.2.11.3.1.12 |
This object indicates the fast_leave status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disable(2) - IGMP fast-leave function is disabled for this entry.
enable(3) - IGMP fast-leave function is enabled for this entry. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disable(2), enable(3) |
|
swL2IGMPQueryVersion |
1.3.6.1.4.1.171.11.101.2.2.11.3.1.13 |
Configure the IGMP version of query packet which will be sent by router. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..3 |
|
swL2IGMPQueryInfoTable |
1.3.6.1.4.1.171.11.101.2.2.11.4 |
The table contains the number current IGMP query packets which
are captured by this device, as well as the IGMP query packets
sent by the device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL2IGMPQueryInfoEntry |
|
swL2IGMPQueryInfoEntry |
1.3.6.1.4.1.171.11.101.2.2.11.4.1 |
Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN
entry are all enabled. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2IGMPQueryInfoEntry |
|
|
swL2IGMPInfoVid |
1.3.6.1.4.1.171.11.101.2.2.11.4.1.1 |
This object indicates the VID of associated IGMP info table
entry. It follows swL2IGMPCtrlVid in the associated entry of
IGMP control table (swL2IGMPCtrlTable). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2IGMPInfoQueryCount |
1.3.6.1.4.1.171.11.101.2.2.11.4.1.2 |
This object indicates the number of query packets received
since the IGMP function was enabled, on a per-VLAN basis. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2IGMPInfoTxQueryCount |
1.3.6.1.4.1.171.11.101.2.2.11.4.1.3 |
This object indicates the send count of IGMP query messages, in
per-VLAN basis. In case of IGMP timer expiration, the switch
sends IGMP query packets to related VLAN member ports and
increment this object by 1. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2IGMPRouterPortEntry |
1.3.6.1.4.1.171.11.101.2.2.11.6.1 |
The entry of swL2IGMPRouterPortTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2IGMPRouterPortEntry |
|
|
swL2IGMPRouterPortVlanid |
1.3.6.1.4.1.171.11.101.2.2.11.6.1.1 |
This object indicates the VLAN ID of the router port entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..4094 |
|
swL2IGMPRouterPortVlanName |
1.3.6.1.4.1.171.11.101.2.2.11.6.1.2 |
This object indicates the VLAN name of the router port entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..32) |
|
swIGMPSnoopingGroupEntry |
1.3.6.1.4.1.171.11.101.2.2.11.11.1 |
Information about the current IGMP snooping group information which has been captured by
the device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwIGMPSnoopingGroupEntry |
|
|
swIGMPSnoopingGroupVid |
1.3.6.1.4.1.171.11.101.2.2.11.11.1.1 |
This object indicates the VID of the individual IGMP snooping group table entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..4094 |
|
swIGMPSnoopingGroupGroupAddr |
1.3.6.1.4.1.171.11.101.2.2.11.11.1.2 |
This object identifies the group IP address which has been captured from
the IGMP packet, on a per-VLAN basis. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
swIGMPSnoopingGroupReportCount |
1.3.6.1.4.1.171.11.101.2.2.11.11.1.6 |
This object indicates how many report packets were received by our
device corresponding with this entry that has the IGMP function enabled,
on a per-group basis. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
swIGMPSnoopingGroupUpTime |
1.3.6.1.4.1.171.11.101.2.2.11.11.1.7 |
This object indicates how long since the group was detected. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
swIGMPSnoopingGroupExpiryTime |
1.3.6.1.4.1.171.11.101.2.2.11.11.1.8 |
This object indicates the time left before this group will be aged out. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
swL2IGMPDynIPMultMaxEntry |
1.3.6.1.4.1.171.11.101.2.2.11.12.1 |
This object specifies the maximum number of entries which can be learned by dynamic IP multicast |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
swL2IGMPDynIPMultCtrlEntry |
1.3.6.1.4.1.171.11.101.2.2.11.12.3.1 |
A list of manageable entities for IGMP dynamic IP multicast. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2IGMPDynIPMultCtrlEntry |
|
|
swL2IGMPDynIPMultVlanState |
1.3.6.1.4.1.171.11.101.2.2.11.12.3.1.1 |
This object is used to disable or enable the dynamic IP multicast feature in this VLAN. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2IGMPDynIPMultVlanAge |
1.3.6.1.4.1.171.11.101.2.2.11.12.3.1.2 |
This object is used to enable or disable aging on the dynamic IP multicast entry in this VLAN. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2IGMPAccessAuthTable |
1.3.6.1.4.1.171.11.101.2.2.11.20 |
This table is used to manage the IGMP Access Authentication
configurations of the device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL2IGMPAccessAuthEntry |
|
swL2IGMPAccessAuthEntry |
1.3.6.1.4.1.171.11.101.2.2.11.20.1 |
A list of manageable entities for IGMP Access Authentication.
The configuration is done per port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2IGMPAccessAuthEntry |
|
|
swL2IGMPAccessAuthPort |
1.3.6.1.4.1.171.11.101.2.2.11.20.1.1 |
The index of the swL2IGMPAccessAuthTable.
This object corresponds to the port being configured. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2IGMPAccessAuthState |
1.3.6.1.4.1.171.11.101.2.2.11.20.1.2 |
This object denotes the status of IGMP Access Authentication of the port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disable(2), enable(3) |
|
swL2TrafficSegTable |
1.3.6.1.4.1.171.11.101.2.2.14.1 |
This table specifies that the port can just forward traffic to the
specific port list. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL2TrafficSegEntry |
|
swL2TrafficSegEntry |
1.3.6.1.4.1.171.11.101.2.2.14.1.1 |
A list of information which specifies the port with its traffic
forwarding list. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2TrafficSegEntry |
|
|
swL2TrafficSegPort |
1.3.6.1.4.1.171.11.101.2.2.14.1.1.1 |
The port number of the logical port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL2TrafficSegForwardPorts |
1.3.6.1.4.1.171.11.101.2.2.14.1.1.2 |
The port list to which the specific port can forward traffic. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
PortList |
|
|
swL2MulticastFilterModeVlanEntry |
1.3.6.1.4.1.171.11.101.2.2.17.1.1 |
A list of multicast filter mode information for each VLAN. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2MulticastFilterModeVlanEntry |
|
|
swL2MulticastFilterVid |
1.3.6.1.4.1.171.11.101.2.2.17.1.1.1 |
Indicates VID for each VLAN. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
swL2MulticastFilterVlanMode |
1.3.6.1.4.1.171.11.101.2.2.17.1.1.2 |
Specifies multicast filter mode for each VLAN. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
forward-unregistered-groups(2), filter-unregistered-groups(3) |
|
swL2LoopDetectAdminState |
1.3.6.1.4.1.171.11.101.2.2.18.1.1 |
This object indicates the loopback detection status for the system. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2LoopDetectInterval |
1.3.6.1.4.1.171.11.101.2.2.18.1.2 |
This object indicates the interval value, the range is from 1 to 32767 seconds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..32767 |
|
swL2LoopDetectRecoverTime |
1.3.6.1.4.1.171.11.101.2.2.18.1.3 |
This object indicates the recover time, the range is from 60 to 1000000.
The value of 0 disables the recover function. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..1000000 |
|
swL2LoopDetectMode |
1.3.6.1.4.1.171.11.101.2.2.18.1.4 |
This object indicates the loopback detection mode for the system. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vlan-based(1), port-based(2) |
|
swL2LoopDetectTrapMode |
1.3.6.1.4.1.171.11.101.2.2.18.1.5 |
This object indicates the loopback detection trap mode for the system. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), loop-detected(2), loop-cleared(3), both(4) |
|
swL2LoopDetectPortEntry |
1.3.6.1.4.1.171.11.101.2.2.18.2.1.1 |
The table specifies the loopback detection function specified by port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2LoopDetectPortEntry |
|
|
swL2LoopDetectPortIndex |
1.3.6.1.4.1.171.11.101.2.2.18.2.1.1.1 |
This object indicates the module's port number. The range is from 1 to
the maximum port number specified in the module |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
swL2LoopDetectPortState |
1.3.6.1.4.1.171.11.101.2.2.18.2.1.1.2 |
This object indicates the loopback detection function state on the port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
swL2LoopDetectPortLoopStatus |
1.3.6.1.4.1.171.11.101.2.2.18.2.1.1.4 |
This object indicates the port status. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
normal(1), loop(2), error(3), none(4) |
|
swL2Notify |
1.3.6.1.4.1.171.11.101.2.2.100.1 |
OBJECT IDENTIFIER |
|
|
|
swL2macNotification |
1.3.6.1.4.1.171.11.101.2.2.100.1.2.0.1 |
This trap indicates the MAC addresses variation in address table . |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
swL2PortSecurityViolationTrap |
1.3.6.1.4.1.171.11.101.2.2.100.1.2.0.2 |
When the port_security trap is enabled, new MAC addresses that violate
the pre-defined port security configuration will trigger trap messages
to be sent out. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
swL2PortLoopOccurred |
1.3.6.1.4.1.171.11.101.2.2.100.1.2.0.3 |
The trap is sent when a Port loop occurs. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
swL2PortLoopRestart |
1.3.6.1.4.1.171.11.101.2.2.100.1.2.0.4 |
The trap is sent when a Port loop restarts after the interval time. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
swL2VlanLoopOccurred |
1.3.6.1.4.1.171.11.101.2.2.100.1.2.0.5 |
The trap is sent when a Port with a VID loop occurs. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
swL2VlanLoopRestart |
1.3.6.1.4.1.171.11.101.2.2.100.1.2.0.6 |
The trap is sent when a Port with a VID loop restarts after the interval time. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
swL2macNotifyInfo |
1.3.6.1.4.1.171.11.101.2.2.100.1.2.1.1 |
This object indicates the last time reboot information. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..1024) |
|
swL2PortSecurityViolationMac |
1.3.6.1.4.1.171.11.101.2.2.100.1.2.1.2 |
This object indicates the MAC address that violates the port security configuration. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
swL2VlanLoopDetectVID |
1.3.6.1.4.1.171.11.101.2.2.100.1.2.1.3 |
This object indicates the VID that detected a loopback. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
swL2DhcpLocalRelayState |
1.3.6.1.4.1.171.11.101.2.2.24.1 |
This object indicates the status of the DHCP local relay
function of the switch. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL2DhcpLocalRelayVLANEntry |
1.3.6.1.4.1.171.11.101.2.2.24.2.1 |
This object lists the current VLANs in the switch and their
corresponding DHCP local relay status. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL2DhcpLocalRelayVLANEntry |
|
|
swL2DhcpLocalRelayVLANID |
1.3.6.1.4.1.171.11.101.2.2.24.2.1.1 |
This object shows the VIDs of the current VLANS in the switch. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..4094 |
|
swL2DhcpLocalRelayVLANState |
1.3.6.1.4.1.171.11.101.2.2.24.2.1.2 |
This object indicates the status of the DHCP relay function
of the VLAN. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|