DH90-MIB

File: DH90-MIB.mib (81254 bytes)

Imported modules

Imported symbols

enterprises	OBJECT-TYPE	NetworkAddress
IpAddress	Counter	Gauge
TimeTicks	PhysAddress	DisplayString
OBJECT-TYPE

Defined Types

Dh90SlotEntry
SEQUENCE
	dh90SlotIndex	INTEGER
	dh90SlotModuleType	INTEGER
	dh90SlotModuleName	DisplayString
	dh90SlotModuleVersion	DisplayString
	dh90SlotCounterTime	Counter
	dh90SlotIfBase	INTEGER
	dh90SlotIfNumber	INTEGER
	dh90SlotPhysicalAddress	PhysAddress
	dh90SlotNumberOfPorts	INTEGER
	dh90SlotPassword	DisplayString
	dh90SlotNewPassword	DisplayString
	dh90SlotPolling	INTEGER
	dh90SlotPrimarySpecific	OBJECT IDENTIFIER
	dh90SlotSecondarySpecific	OBJECT IDENTIFIER

Dh90TrapEntry
SEQUENCE
	dh90TrapAddress	IpAddress

Da90CommunityEntry
SEQUENCE
	da90CommunityIndex	INTEGER
	da90CommunityType	INTEGER
	da90CommunityROString	OCTET STRING
	da90CommunityRWString	OCTET STRING
	da90CommunityTrapString	OCTET STRING

Ds90LModuleEntry
SEQUENCE
	ds90LSlotIndex	INTEGER
	ds90LDot3StatsDeferredTransmissions	Counter
	ds90LDot3StatsSingleCollisionFrames	Counter
	ds90LDot3StatsMultipleCollsionFrames	Counter
	ds90LEnetDataOverruns	Counter
	ds90LLatCircMsgsIns	Counter
	ds90LLatCircMsgsOuts	Counter
	ds90LLatSessSolicitAccepts	Counter
	ds90LLatSessSolicitRejects	Counter
	ds90LLatCircDuplsMsgs	Counter
	ds90LLatCircMsgRetransmits	Counter
	ds90LLatSessIllegalSlots	Counter
	ds90LIllegalMulticastRcvs	Counter
	ds90LLatCircKeepAlive	INTEGER	10..255
	ds90LLatCircRetransmitLimit	INTEGER	4..120
	ds90LLatCircInvalidMsgs	Counter
	ds90LAuthorizedMode	INTEGER
	ds90LMaintenance	INTEGER
	ds90LPrompt	DisplayString

Ds90LPortEntry
SEQUENCE
	ds90LPortIndex	INTEGER
	ds90LPortRemoteModification	INTEGER
	ds90LPortType	INTEGER
	ds90LPortBreak	INTEGER
	ds90LPortTest	INTEGER
	ds90LPortAutoConfigure	INTEGER
	ds90LPortOnDemandLoading	INTEGER

Ds90LSessionEntry
SEQUENCE
	ds90LSessionPort	INTEGER
	ds90LSessionIndex	INTEGER
	ds90LSessionRemoteNode	DisplayString
	ds90LSessionService	DisplayString
	ds90LSessionRemotePortId	DisplayString

Drpt90PortEntry
SEQUENCE
	drpt90PortIndex	INTEGER
	drpt90PortName	DisplayString
	drpt90PortAdminStatus	INTEGER
	drpt90PortState	INTEGER
	drpt90PortType	INTEGER
	drpt90PortPartitionCount	INTEGER
	drpt90PortAutoPartitionReason	INTEGER
	drpt90PortJamBits	INTEGER

Drpt90PortAddrEntry
SEQUENCE
	drpt90PortPhyAddr	PhysAddress
	drpt90PortAddrIndex	INTEGER

DbIfEntry
SEQUENCE
	dbIfIndex	INTEGER
	dbIfBadFramesReceived	Counter
	dbIfTransmitFramesError	Counter

Db90IfEntry
SEQUENCE
	db90IfIndex	INTEGER
	db90IfDeviceFramesReceived	Counter
	db90IfBadHelloLimitExceeded	Counter

Db90IfEtherEntry
SEQUENCE
	db90IfEthIndex	INTEGER
	db90IfEthFramingError	Counter
	db90IfEthCarrierLoss	Counter
	db90IfEthCollisionLimitExceeded	Counter

Db90IfSpanEntry
SEQUENCE
	db90IfSpIndex	INTEGER
	db90IfSpDesigRootAge	INTEGER
	db90IfSpForwardDelayTimer	INTEGER
	db90IfSpBadHelloCount	Counter
	db90IfSpTopologyChangeAckFlag	INTEGER

Db90ProtoFilterEntry
SEQUENCE
	db90ProtoFilterProtocol	OCTET STRING
	db90ProtoFilterType	INTEGER
	db90ProtoFilterStatus	INTEGER
	db90ProtoFilterMulticastFlag	INTEGER
	db90ProtoFilterPortMask	INTEGER

Defined Values

dec		1.3.6.1.4.1.36
OBJECT IDENTIFIER

ema		1.3.6.1.4.1.36.2
OBJECT IDENTIFIER

decMIBextension		1.3.6.1.4.1.36.2.18
OBJECT IDENTIFIER

decExp		1.3.6.1.4.1.36.2.18.3
OBJECT IDENTIFIER

dh90		1.3.6.1.4.1.36.2.18.3.1
OBJECT IDENTIFIER

da90		1.3.6.1.4.1.36.2.18.3.2
OBJECT IDENTIFIER

ds90L		1.3.6.1.4.1.36.2.18.3.3
OBJECT IDENTIFIER

drpt90		1.3.6.1.4.1.36.2.18.3.4
OBJECT IDENTIFIER

db90ext		1.3.6.1.4.1.36.2.18.3.5
OBJECT IDENTIFIER

db90system		1.3.6.1.4.1.36.2.18.3.5.1
OBJECT IDENTIFIER

db90interfaces		1.3.6.1.4.1.36.2.18.3.5.2
OBJECT IDENTIFIER

db90bridge		1.3.6.1.4.1.36.2.18.3.5.3
OBJECT IDENTIFIER

dh90Type		1.3.6.1.4.1.36.2.18.3.1.1
Identifies the type of Hub defined and identifies standalone configurations managed by DECagent 90 modules. Setting this variable to invalid deletes the community associated with the community string and releases the RAM and flash memory resources used by the community.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), invalid(2), standAloneCommunity(3), dechub90(4)

dh90Backplane		1.3.6.1.4.1.36.2.18.3.1.2
Media on backplane of hub.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), ethernet(2)

dh90LastChange		1.3.6.1.4.1.36.2.18.3.1.3
The value of the sysUpTime at the time this hub added or removed a module.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

dh90NumberSlots		1.3.6.1.4.1.36.2.18.3.1.4
Number of slots in backplane. Setting this variable to values of 1, 8 or 16 defines the size of a hub in a particular community.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..16

dh90SlotTable		1.3.6.1.4.1.36.2.18.3.1.5
A list of modules installed in the DEChub 90. The number of entries is given in dh90SlotNumber. To create a new row (module) in the slot table, set a EMPTY dh90SlotModuleType to the appropriate value. If adding a bridge or server, next set the dh90SlotPhysicalAddress for the row. Sets of the other variables in the row must be done in separate PDUs AFTER the mac address of the device has been set correctly.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Dh90SlotEntry

dh90SlotEntry		1.3.6.1.4.1.36.2.18.3.1.5.1
Contains objects defining characteristics of modules in the DEChub 90
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Dh90SlotEntry

dh90SlotIndex		1.3.6.1.4.1.36.2.18.3.1.5.1.1
The slot number containing the module
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..16

dh90SlotModuleType		1.3.6.1.4.1.36.2.18.3.1.5.1.2
The type of the module in a slot. If the slot is known to be empty, a value of empty is used. If the slot is occupied by a module of unknown type, a value of unknown is used.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), empty(2), decserver90L(3), decbridge90(4), decrepeater90C(5), decrepeater90T(6), decagent90(7), decserver90Lplus(8), decserver90LT(9)

dh90SlotModuleName		1.3.6.1.4.1.36.2.18.3.1.5.1.3
A textual description of the module
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..16)

dh90SlotModuleVersion		1.3.6.1.4.1.36.2.18.3.1.5.1.4
A textual description of the version level of the hardware and firmware of the module
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

dh90SlotCounterTime		1.3.6.1.4.1.36.2.18.3.1.5.1.5
Time since the counters of this module were zeroed
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dh90SlotIfBase		1.3.6.1.4.1.36.2.18.3.1.5.1.6
An index into the ifTable for the first interface on this module. Add one to this value to reference the ifTable entry which corresponds to the second interface, etc. If no interface(s) is/are supported on the module, a value of zero is returned.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..17

dh90SlotIfNumber		1.3.6.1.4.1.36.2.18.3.1.5.1.7
Number of interfaces on this module.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..2

dh90SlotPhysicalAddress		1.3.6.1.4.1.36.2.18.3.1.5.1.8
A read-write variable for the physical address to allow devices to be added to the hub remotely. Writing this variable as part of a remote add device routine will cause the new physical address to be accessable in the corresponding ifPhysAddress variable in ifTable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	PhysAddress

dh90SlotNumberOfPorts		1.3.6.1.4.1.36.2.18.3.1.5.1.9
The number of ports on this module. Returns 8 for DECserver90L and DECrepeater90T, 6 for DECrepeater90C.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..8

dh90SlotPassword		1.3.6.1.4.1.36.2.18.3.1.5.1.10
Password used to enable privileged operations on the DECserver90L and access to the bridge. Reads to this variable will return a null string.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..16)

dh90SlotNewPassword		1.3.6.1.4.1.36.2.18.3.1.5.1.11
Setting this variable causes the agent to set a new password on the terminal server using the TSNewPassword value as the new password and TSPassword as the old password. Power on the terminal server must be cycled within a minute for the change to take effect. Reads to this variable will return a null string.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..16)

dh90SlotPolling		1.3.6.1.4.1.36.2.18.3.1.5.1.12
The current polling status of the module. If the DECagent 90 is polling this device, a get of this variable will return 'on', otherwise 'off' is returned. Setting this variable to 'off' causes the agent to stop polling the device in this slot. Setting this variable to 'on' causes the agent to start polling the device in the specified slot. If a device does not repond to a poll, an moduleDown enterprise specific trap is generated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dh90SlotPrimarySpecific		1.3.6.1.4.1.36.2.18.3.1.5.1.13
A reference to the Bridge { experimental 14 }, the Character-like { experimental 19 } or the { drpt90 } repeater portion of this MIB definition. If the module realizes some other function, the object identifier nullSpecific OBJECT IDENTIFIER ::= { 0 0 } is returned.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

dh90SlotSecondarySpecific		1.3.6.1.4.1.36.2.18.3.1.5.1.14
A reference to the RS232-like { experimental 20 } MIB definition, if dh90ModulePrimarySpecific identifies the Character-like MIB. Otherwise, the object identifier nullSpecific OBJECT IDENTIFIER ::= { 0 0 } is returned.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

dh90TrapAddressTable		1.3.6.1.4.1.36.2.18.3.1.6
A table of IP Addresses to which this device will send traps.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Dh90TrapEntry

dh90TrapEntry		1.3.6.1.4.1.36.2.18.3.1.6.1
Each entry contains an IP Address to which all SNMP Traps will be sent by this community.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Dh90TrapEntry

dh90TrapAddress		1.3.6.1.4.1.36.2.18.3.1.6.1.1
An IP Address to which all SNMP traps generated by this device will be sent. Setting a instance to a value of zero will delete the row in the table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

da90FlashErasures		1.3.6.1.4.1.36.2.18.3.2.1
The number of times the flash memory on this DECagent 90 has been erased. This number is the total of erasures for all segments of flash.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

da90Maintenance		1.3.6.1.4.1.36.2.18.3.2.2
A control variable to reset the counters on a DECagent 90. In response to a get-request or a get-next-request, the agent always returns 'ready'. Setting the value to 'reset' causes the entire module to be reset. Setting the value to 'resetToFactory' causes the entire device to be reset to the original factory settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ready(1), unused(2), reset(3), resetToFactory(4)

da90CommunityNumber		1.3.6.1.4.1.36.2.18.3.2.3
Number of community string-pair entries in da90HubCommStrsTable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..64

da90CommunityTable		1.3.6.1.4.1.36.2.18.3.2.4
A table of community string pairs for client hubs.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Da90CommunityEntry

da90CommunityEntry		1.3.6.1.4.1.36.2.18.3.2.4.1
Contains a pair of community strings, one specifying a read-only profile, the other a read-write profile.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Da90CommunityEntry

da90CommunityIndex		1.3.6.1.4.1.36.2.18.3.2.4.1.1
Index into hub community string pair table, identifies the community being accessed
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..64

da90CommunityType		1.3.6.1.4.1.36.2.18.3.2.4.1.2
Identifies whether the current community information in the DENMA is active for this row in the community table. Setting to invalid frees the NVRAM used to store the community information (destroys the slot table and port tables for this community).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), invalid(2), active(3)

da90CommunityROString		1.3.6.1.4.1.36.2.18.3.2.4.1.3
Community string, with a read-only profile, used to access a da90's client Hub. All community strings in the read-only set must be unique. Setting such a community string to a pre-existing value returns a status of BadValue. Reading this variable with any community string other than the agent's community string will return a zero length string.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

da90CommunityRWString		1.3.6.1.4.1.36.2.18.3.2.4.1.4
Community string, with a read-write profile, used to access a da90's client Hub. All community strings in the read-only set must be unique. Setting such a community string to a pre-existing value returns a status of BadValue. Reading this variable with any community string other than the agent's read-write community string will return a zero length string.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

da90CommunityTrapString		1.3.6.1.4.1.36.2.18.3.2.4.1.5
Community string sent with traps generated due to events caused by this community. The trap community strings do not have to be unique. This variable is read using the agent's community string.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

ds90LNumberModules		1.3.6.1.4.1.36.2.18.3.3.1
Number of DECserver 90L Modules represented in the ds90LModuleTable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..16

ds90LModuleTable		1.3.6.1.4.1.36.2.18.3.3.2
A table of DECserver 90L modules installed in the group. The number of entries is given in ds90LModuleNumber.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Ds90LModuleEntry

ds90LModuleEntry		1.3.6.1.4.1.36.2.18.3.3.2.1
Contains objects defining characteristics of DECserver 90L modules in the group
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Ds90LModuleEntry

ds90LSlotIndex		1.3.6.1.4.1.36.2.18.3.3.2.1.1
The slot index value which addresses the dh90SlotTable for this module.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

ds90LDot3StatsDeferredTransmissions		1.3.6.1.4.1.36.2.18.3.3.2.1.2
A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ds90LDot3StatsSingleCollisionFrames		1.3.6.1.4.1.36.2.18.3.3.2.1.3
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. (If DS90L is implementing the MIB-II if group, the following also applies: A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the ds90LDot3StatsMultipleCollisionFrames object.)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ds90LDot3StatsMultipleCollsionFrames		1.3.6.1.4.1.36.2.18.3.3.2.1.4
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. (If DS90L is implementing the MIB-II if group, the following also applies: A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the ds90LDot3StatsSingleCollisionFrames object.)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ds90LEnetDataOverruns		1.3.6.1.4.1.36.2.18.3.3.2.1.5
A count of the number of frames arriving at the DS90L lost due to data overrun since it last reinitialized or zeroed counters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ds90LLatCircMsgsIns		1.3.6.1.4.1.36.2.18.3.3.2.1.6
A count of the number of LAT circuit messages received by this DS90L since it last reinitialized or zeroed counters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ds90LLatCircMsgsOuts		1.3.6.1.4.1.36.2.18.3.3.2.1.7
A count of the number of LAT circuit messages transmitted by this DS90L since it last reinitialized or zeroed counters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ds90LLatSessSolicitAccepts		1.3.6.1.4.1.36.2.18.3.3.2.1.8
A count of the number of LAT Solicits accepted by this DS90L since it last reinitialized or zeroed counters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ds90LLatSessSolicitRejects		1.3.6.1.4.1.36.2.18.3.3.2.1.9
A count of the number of LAT Solicits rejected by this DS90L since it last reinitialized or zeroed counters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ds90LLatCircDuplsMsgs		1.3.6.1.4.1.36.2.18.3.3.2.1.10
A count of the number of duplicate LAT messages the DS90L LAT implementation has discarded since it last reinitialized or zeroed counters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ds90LLatCircMsgRetransmits		1.3.6.1.4.1.36.2.18.3.3.2.1.11
A count of the total number of LAT circuit messages this DS90L has retransmitted since it last reinitialized or zeroed counters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ds90LLatSessIllegalSlots		1.3.6.1.4.1.36.2.18.3.3.2.1.12
A count of the number of illegal LAT slots the DS90L has received on all LAT sessions since it last reinitialized or zeroed counters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ds90LIllegalMulticastRcvs		1.3.6.1.4.1.36.2.18.3.3.2.1.13
This counts the number of illegal multicast LAT messages received on this DECserver 90L since it last reinitialized or zeroed counters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ds90LLatCircKeepAlive		1.3.6.1.4.1.36.2.18.3.3.2.1.14
This defines the number of seconds the LAT circuits provider waits between transmitting LAT circuit layer keep-alive messages. Writing to this object is equivalent to issuing the CHANGE SERVER KEEPALIVE TIMER command via the user interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	10..255

ds90LLatCircRetransmitLimit		1.3.6.1.4.1.36.2.18.3.3.2.1.15
This object defines the maximum number of LAT circuit message retransmissions the server will attempt before declaring the circuit failed. Writing to this object is equivalent to issuing the CHANGE SERVER RETRANSMIT LIMIT command via the user interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	4..120

ds90LLatCircInvalidMsgs		1.3.6.1.4.1.36.2.18.3.3.2.1.16
This counts the number of invalid LAT messages received on its entry's LAT circuit since the DECserver90L last reinitialized or zeroed counters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ds90LAuthorizeMode		1.3.6.1.4.1.36.2.18.3.3.2.1.17
Setting this value to enable causes the SET A,password command to be sent to the DECserver 90. The module will enter authorized mode IF the power is cycled on the module within one minute. The password used will be the current value of dh90ModulePassword. Setting this variable to disable results in authorized mode being cleared
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ds90LMaintenance		1.3.6.1.4.1.36.2.18.3.3.2.1.18
A control variable to reset the counters on a DECserver 90L. In response to a get-request or a get-next-request, the agent always returns 'ready'. Setting the value to 'zeroCounters' causes the if, LAT and dh90SlotCounterTime counters to be cleared. Setting the value to 'reset' causes the entire module to be reset, any users and circuits will be disconnected. Setting the value to 'resetToFactory' causes the entire device to be reset to the original factory settings. Passwords, port names and printer speeds will be cleared.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ready(1), zeroCounters(2), reset(3), resetToFactory(4)

ds90LPrompt		1.3.6.1.4.1.36.2.18.3.3.2.1.19
A DECserver 90L+ (PLUS) variable. Contains the prompt displayed when a session is local to the PLUS version of the terminal server. The default value is '->'. This variable is not present if the server is a DECserver 90L.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..16)

ds90LPortTable		1.3.6.1.4.1.36.2.18.3.3.3
Table of port specific variables on this DECserver90L.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Ds90LPortEntry

ds90LPortEntry		1.3.6.1.4.1.36.2.18.3.3.3.1
A single LAT session instance this DS90L currently provides.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Ds90LSessionEntry

ds90LPortIndex		1.3.6.1.4.1.36.2.18.3.3.3.1.1
The value of charPortIndex for this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	101..1608

ds90LPortRemoteModification		1.3.6.1.4.1.36.2.18.3.3.3.1.2
Enables and disables remote modification of of the port by the host system.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ds90LPortType		1.3.6.1.4.1.36.2.18.3.3.3.1.3
Selects the type of device connected to the port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	terminal(1), printer(2)

ds90LPortBreak		1.3.6.1.4.1.36.2.18.3.3.3.1.4
Determines if the port responds to local or remote break.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	local(1), remote(2)

ds90LPortTest		1.3.6.1.4.1.36.2.18.3.3.3.1.5
Setting this variable to enable places the port into loopback mode. Loopback mode can be used to verify that a port is receiving and sending characters.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ds90LPortAutoConfigure		1.3.6.1.4.1.36.2.18.3.3.3.1.6
A DECserver 90L+ (PLUS) variable. Enables or disables the Autoconfiguration of the port, the ability of the port to autobaud. Disabling autoconfiguration also causes the speed and characteristics of the port to be stored in non-volatile memory on the server. The variable is not present if the server is a DECserver 90L.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ds90LPortOnDemandLoading		1.3.6.1.4.1.36.2.18.3.3.3.1.7
A DECserver 90L+ (PLUS) variable. Enables or disables on demand loading of fonts. The variable is not present if the server is a DECserver 90L.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ds90LSessionTable		1.3.6.1.4.1.36.2.18.3.3.4
The list of all LAT sessions active on this DECserver90L.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Ds90LSessionEntry

ds90LSessionEntry		1.3.6.1.4.1.36.2.18.3.3.4.1
A single LAT session instance this DS90L currently provides.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Ds90LSessionEntry

ds90LSessionPort		1.3.6.1.4.1.36.2.18.3.3.4.1.1
The value of charPortIndex for the port to which this session belongs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	101..1608

ds90LSessionIndex		1.3.6.1.4.1.36.2.18.3.3.4.1.2
The session index in the context of the port, a non-zero positive integer. Will be 1 for the DECserver90L, 4 for DECserver 90L+.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

ds90LSessionRemoteNode		1.3.6.1.4.1.36.2.18.3.3.4.1.3
The name of the remote node providing the service for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..6)

ds90LSessionService		1.3.6.1.4.1.36.2.18.3.3.4.1.4
The service to which this session is connected.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..6)

ds90LSessionRemotePortId		1.3.6.1.4.1.36.2.18.3.3.4.1.5
The name of the port at the remote node providing the connection, for instance LAT121.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..6)

drpt90PortTable		1.3.6.1.4.1.36.2.18.3.4.1
A list of port entries. The index for a repeater port is given by (slot number*100) + port number The number of ports is given by dh90SlotTable.dh90SlotEntry. dh90SlotNumberOfPorts.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Drpt90PortEntry

drpt90PortEntry		1.3.6.1.4.1.36.2.18.3.4.1.1
A collection of objects containing information for a given interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Drpt90PortEntry

drpt90PortIndex		1.3.6.1.4.1.36.2.18.3.4.1.1.1
Identifies the module and port. The value of this object is given by: (slot number*100) + port number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	101..1608

drpt90PortName		1.3.6.1.4.1.36.2.18.3.4.1.1.2
The text description of the port given by management
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..16)

drpt90PortAdminStatus		1.3.6.1.4.1.36.2.18.3.4.1.1.3
The desired state of the port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

drpt90PortState		1.3.6.1.4.1.36.2.18.3.4.1.1.4
The state of the port. Unknown(1) is returned when the port state cannot be determined. AutoPartitioned(2) indicates that the repeater has disabled the port automatically, ManagementPartitioned(3) indicates that the port has been disabled remotely, and active(4) indicates that the port is operational.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), autoPartitioned(2), managementPartitioned(3), active(4)

drpt90PortType		1.3.6.1.4.1.36.2.18.3.4.1.1.5
The Physical Medium type of the port
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), twistedPair(2), thinWire(3)

drpt90PortPartitionCount		1.3.6.1.4.1.36.2.18.3.4.1.1.6
The number of times this port has partitioned. This value is only significant if drpt90PortStatus is not unknown(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

drpt90PortAutoPartitionReason		1.3.6.1.4.1.36.2.18.3.4.1.1.7
Errors currently detected on the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notPartitioned(0), managementPartitioned(1), excessiveLength(2), excessiveLengthAndMgmtPart(3), excessiveCollisions(4), excessiveCollisionsAndMgmtPart(5), jabber(6), jabberAndMgmtPart(7), nocarrierLoopback(8), nocarrierLoopbackAndMgmtPart(9), transmitCarrierDropout(10), transmitCarrierDropoutAndMgmtPart(11)

drpt90PortJamBits		1.3.6.1.4.1.36.2.18.3.4.1.1.8
The number of jam bits being used on the port segment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), jb96(2), jb128(3)

drpt90PortAddrTable		1.3.6.1.4.1.36.2.18.3.4.2
A list of MAC addresses paired with the repeater port on which they have been seen.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Drpt90PortAddrEntry

drpt90PortAddrEntry		1.3.6.1.4.1.36.2.18.3.4.2.1
A MAC addresses and the repeater port on which it resides.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Drpt90PortAddrEntry

drpt90PortPhyAddr		1.3.6.1.4.1.36.2.18.3.4.2.1.1
A MAC address seen on this port
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

drpt90PortAddrIndex		1.3.6.1.4.1.36.2.18.3.4.2.1.2
Identifies the module and port. The value of this object the same as drpt90PortIndex and is given by: (slot number*100) + port number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	101..1608

dbSysChar		1.3.6.1.4.1.36.2.18.3.5.1.1
OBJECT IDENTIFIER

dbSysStatus		1.3.6.1.4.1.36.2.18.3.5.1.2
OBJECT IDENTIFIER

dbSysRomVersion		1.3.6.1.4.1.36.2.18.3.5.1.1.1
The version number of the software stored in ROM.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dbSysInitSwitch		1.3.6.1.4.1.36.2.18.3.5.1.1.2
This object allows the management action of initializing a device and forcing it to run selftest. It can also be used to reset all information added to the device's NVRAM. When read, it returns a value of other(1). When set to a value of 'reset', the bridge will empty the forwarding data base and start relearning. When set to 'resetToFactory', the bridge will empty the forwarding data base, reset spanning tree and clear all protocol filters and password.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), reset(2), resetToFactory(3)

dbSysDeviceState		1.3.6.1.4.1.36.2.18.3.5.1.2.1
The operational state of the device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	init(1), operate(2), broken(3)

dbSysNvramFailed		1.3.6.1.4.1.36.2.18.3.5.1.2.2
A flag, that, when set to True, indicates that the NVRAM failed selftest following the last initialization of the device. Values set to variables maintained on the bridge will not be preserved over a power cycle of the bridge.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

dbIfTable		1.3.6.1.4.1.36.2.18.3.5.2.1
A list of interface entries. The number of entries is given by ifNumber, defined in [2].
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DbIfEntry

dbIfEntry		1.3.6.1.4.1.36.2.18.3.5.2.1.1
A collection of objects containing information for a given interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DbIfEntry

dbIfIndex		1.3.6.1.4.1.36.2.18.3.5.2.1.1.1
Identifies the Interface. The value of this the same object is as the ifIndex, defined in [2], for this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..17

dbIfBadFramesReceived		1.3.6.1.4.1.36.2.18.3.5.2.1.1.2
Number of frames received with a bad frame check sequence or the device received a frame loss indication from the hardware on the interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dbIfTransmitFramesError		1.3.6.1.4.1.36.2.18.3.5.2.1.1.3
Number of frames that were transmitted with an error on the line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

db90Char		1.3.6.1.4.1.36.2.18.3.5.3.1
OBJECT IDENTIFIER

db90Stat		1.3.6.1.4.1.36.2.18.3.5.3.2
OBJECT IDENTIFIER

db90Coun		1.3.6.1.4.1.36.2.18.3.5.3.3
OBJECT IDENTIFIER

db90Span		1.3.6.1.4.1.36.2.18.3.5.3.4
OBJECT IDENTIFIER

db90PortInterfaces		1.3.6.1.4.1.36.2.18.3.5.3.5
OBJECT IDENTIFIER

db90ProtoFilt		1.3.6.1.4.1.36.2.18.3.5.3.6
OBJECT IDENTIFIER

db90LB100SpanningTreeVer		1.3.6.1.4.1.36.2.18.3.5.3.1.1
The version number of the Spanning Tree algorithm used by the bridge when in the LAN Bridge 100 Spanning Tree mode.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90802SpanningTreeVer		1.3.6.1.4.1.36.2.18.3.5.3.1.2
The version number of the Spanning Tree algorithm used by the bridge when in the 802.1d Spanning Tree mode.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90MaxForwardingDBEntries		1.3.6.1.4.1.36.2.18.3.5.3.1.3
The maximum number of address entries that the bridge can store in its volatile memory.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90MaxNVForwardingDBEntries		1.3.6.1.4.1.36.2.18.3.5.3.1.4
The maximum number of permanent address entries that the bridge can store in its NVRAM.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90MaxProtocolDBEntries		1.3.6.1.4.1.36.2.18.3.5.3.1.5
The maximum number of protocol entries that the bridge can store in its protocol database. These entries control the handling of frames based on their Ethernet PT, IEEE 802.2 DSAP or IEEE 802 SNAP Protocol ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90MaxNVProtocolDBEntries		1.3.6.1.4.1.36.2.18.3.5.3.1.6
The maximum number of protocol entries that the bridge can store in its nonvolatile memory. These are retained after a power-down.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90CurrProtocolDBEntries		1.3.6.1.4.1.36.2.18.3.5.3.2.1
The number of protocol entries that are stored in the bridge's protocol database. These control the handling of frames based on their Ethernet protocol type, IEEE 802.2 DSAP, or 802 SNAP Protocol ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90CurrNVProtocolDBEntries		1.3.6.1.4.1.36.2.18.3.5.3.2.2
The number of protocol entries in the bridge's NVRAM. These are retained after a power loss.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90MgmtHeardPort		1.3.6.1.4.1.36.2.18.3.5.3.2.3
The port on which this command was received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	backbone(1), workgroup(2)

db90LB100BeingPolled		1.3.6.1.4.1.36.2.18.3.5.3.2.4
The address of the LAN Bridge 100 mode bridge that sent this bridge into the LAN Bridge 100 Spanning Tree mode. If this bridge is the Root, this object indicates the bridge that will be polled periodically to determine if it is still necessary to stay in this Spanning Tree mode.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

db90TimeSinceLastHello		1.3.6.1.4.1.36.2.18.3.5.3.2.5
The number of seconds since the bridge last sent a Hello message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90HubManagement		1.3.6.1.4.1.36.2.18.3.5.3.2.6
Indicates whether the bridge is managing the hub (i.e., is capable of managing repeaters inserted in the hub).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

db90CurrFdbEntries		1.3.6.1.4.1.36.2.18.3.5.3.2.7
The number of entries currently active in the DECbridge 90 forwarding data base, or one more than the value of db90MaxForwardingDBEntries if the bridge has exceededd the size of the forwarding data base hardware.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

db90SpanningTreeModeChanges		1.3.6.1.4.1.36.2.18.3.5.3.3.1
The number of times that the bridge switched from the 802.1d Spanning Tree mode to the LB100 Spanning Tree mode.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

db90BestRootAge		1.3.6.1.4.1.36.2.18.3.5.3.4.1
The age, in hundredths of seconds, of the Hello message that established the best root.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90TopologyChangeFlag		1.3.6.1.4.1.36.2.18.3.5.3.4.2
A flag that indicates whether a Topology Change is currently in effect on the extended LAN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

db90TellParentFlag		1.3.6.1.4.1.36.2.18.3.5.3.4.3
A flag that indicates if the bridge is attempting to propagate a topology change towards the Root.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

db90ForwardingDBShortAgingTime		1.3.6.1.4.1.36.2.18.3.5.3.4.4
The number of seconds that the bridge keeps learned entries active while a topology change is in effect.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90BadHelloLimit		1.3.6.1.4.1.36.2.18.3.5.3.4.5
The number of hello intervals during which the bridge receives one or more bad hellos on a line, before the bridge performs a test on the link. A bad Hello message is one that contains inferior information that is received on a port on which this bridge is Designated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90BadHelloResetTimer		1.3.6.1.4.1.36.2.18.3.5.3.4.6
The number of Hello intervals without bad Hellos that the bridge will wait before it resets its bad Hello count to zero.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

db90NoFrameInterval		1.3.6.1.4.1.36.2.18.3.5.3.4.7
The The number of seconds of inactivity on a line that will cause the bridge to run a test on that line. The bridge considers a line to be inactive if it does not receive any frames on that line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90LB100PollTime		1.3.6.1.4.1.36.2.18.3.5.3.4.8
The number of seconds that a Root bridge in LAN Bridge 100 mode waits between polling the LAN Bridge 100 that is keeping it in this mode. This polling is done to determine whether the LB100 is still present on the extended LAN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90LB100ResponseTimeout		1.3.6.1.4.1.36.2.18.3.5.3.4.9
The number of seconds that a Root in LAN Bridge 100 Spanning Tree mode will wait for a response from the LAN Bridge 100 which is keeping it in this mode, before which it will assume that the LB100 is no longer on the extended LAN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90LB100SpanningTreeCompat		1.3.6.1.4.1.36.2.18.3.5.3.4.10
A switch that controls the Spanning Tree mode used by the bridge. If in Auto-Select mode, the bridge will go into 802 Spanning Tree mode by default, but will switch to LB100 mode as soon as a LB100 is detected. In 802 Spanning Tree mode, the bridge will stay in 802 mode.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	autoSelect(1), ieee802(2)

db90IfTable		1.3.6.1.4.1.36.2.18.3.5.3.5.1
A list of interface entries. The number of entries is given by ifNumber, defined in [2].
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Db90IfEntry

db90IfEntry		1.3.6.1.4.1.36.2.18.3.5.3.5.1.1
A collection of objects containing information for a given interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Db90IfEntry

db90IfIndex		1.3.6.1.4.1.36.2.18.3.5.3.5.1.1.1
Identifies the Interface. The value of this object is the same as the ifIndex, defined in [2], for this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..17

db90IfDeviceFramesReceived		1.3.6.1.4.1.36.2.18.3.5.3.5.1.1.2
The number of frames addressed to the bridge itself that were received on this line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

db90IfBadHelloLimitExceeded		1.3.6.1.4.1.36.2.18.3.5.3.5.1.1.3
The number of times that the Bad Hellos on the line exceeded the Bad Hello limit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

db90IfEtherTable		1.3.6.1.4.1.36.2.18.3.5.3.5.2
A list of interface entries for an Ethernet port.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Db90IfEtherEntry

db90IfEtherEntry		1.3.6.1.4.1.36.2.18.3.5.3.5.2.1
A collection of objects containing information for a given interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Db90IfEtherEntry

db90IfEthIndex		1.3.6.1.4.1.36.2.18.3.5.3.5.2.1.1
Identifies the Interface. The value of this object is the same as the ifIndex, defined in [2], for this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

db90IfEthFramingError		1.3.6.1.4.1.36.2.18.3.5.3.5.2.1.2
The number of times that a frame received on the line contained both a noninteger multiple of 8 bits and a CRC error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

db90IfEthCarrierLoss		1.3.6.1.4.1.36.2.18.3.5.3.5.2.1.3
The number of times that the bridge detected a loss of the carrier signal while transmitting a frame on the line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

db90IfEthCollisionLimitExceeded		1.3.6.1.4.1.36.2.18.3.5.3.5.2.1.4
The number of times that the bridge failed to transmit a frame on this line after 16 attempts, the collision limit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

db90IfSpanTable		1.3.6.1.4.1.36.2.18.3.5.3.5.3
A list of interface entries for a port.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Db90IfSpanEntry

db90IfSpanEntry		1.3.6.1.4.1.36.2.18.3.5.3.5.3.1
A collection of objects containing information for a given interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Db90IfSpanEntry

db90IfSpIndex		1.3.6.1.4.1.36.2.18.3.5.3.5.3.1.1
Identifies the Interface. The value of this object is the same as the ifIndex, defined in [2], for this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..17

db90IfSpDesigRootAge		1.3.6.1.4.1.36.2.18.3.5.3.5.3.1.2
The age, in hundreths of seconds, of the last Hello message received from the designated bridge on the line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90IfSpForwardDelayTimer		1.3.6.1.4.1.36.2.18.3.5.3.5.3.1.3
The time remaining, in hundreths of seconds, before the bridge will leave the Learning State of Preforwarding, and enter the Forwarding State.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

db90IfSpBadHelloCount		1.3.6.1.4.1.36.2.18.3.5.3.5.3.1.4
The number of Hello intervals during which at least one Bad Hello was received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

db90IfSpTopologyChangeAckFlag		1.3.6.1.4.1.36.2.18.3.5.3.5.3.1.5
A flag that indicates whether a topology change notification received on a link that we are designated on needs to be acknowledged.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

db90ProtoFilterOther		1.3.6.1.4.1.36.2.18.3.5.3.6.1
Action taken by the bridge on Ethernet protocol types or the 5-byte SNAP PIDs other than those specified in the db90ProtoTable. This value defaults to forward(1) and is modified only if a protocol with db90filterEntry.db90FilterStatus of forward(1) is entered into the table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	forward(1), filter(2)

db90ProtoFilterTable		1.3.6.1.4.1.36.2.18.3.5.3.6.2
A table that contains filtering information about Ethernet protocol types and 5 byte SNAP PIDs for the DECbridge 90.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Db90ProtoFilterEntry

db90ProtoFilterEntry		1.3.6.1.4.1.36.2.18.3.5.3.6.2.1
A table that contains filtering characteristics for Ethernet protocol types and 5 byte SNAP PIDs for the DECbridge 90.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Db90ProtoFilterEntry

db90ProtoFilterProtocol		1.3.6.1.4.1.36.2.18.3.5.3.6.2.1.1
The protocol type or SNAP PID in a frame to which this entry's filtering information applies. The length is 2 for Ethernet protocol types and 5 for SNAP PID.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(2..5)

db90ProtoFilterType		1.3.6.1.4.1.36.2.18.3.5.3.6.2.1.2
The type of this entry. unknown(1) specifies that this protocol filter is unused. invalid(2) deletes the filter. ethernet(3) or snap-sap(4) defines the size of db90ProtoFilterProtocol.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), invalid(2), ethernet(3), snap-sap(4)

db90ProtoFilterStatus		1.3.6.1.4.1.36.2.18.3.5.3.6.2.1.3
Action taken by bridge when it sees this ethernet protocol type or SNAP PID in a received frame. Note that this value must be identical to db90ProtoFilterOther unless db90ProtoFilterMulticastFlag is multicastOnly(2) or there are no other entries with db90ProtoFilterMulticastFlag=allFrames(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	forward(1), filter(2)

db90ProtoFilterMulticastFlag		1.3.6.1.4.1.36.2.18.3.5.3.6.2.1.4
Identifies whether or not filtering is based on the multicast bit in the MAC destination address. If allFrames(1), then filtering is performed as per db90ProtoFilterStatus. For multicastOnly(2), multicast frames for this protocol are always filtered and unicast frames are always forwarded; this is true regardless of the value of db90ProtoFilterOther.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	allFrames(1), multicastOnly(2)

db90ProtoFilterPortMask		1.3.6.1.4.1.36.2.18.3.5.3.6.2.1.5
Must be allPorts(3) unless db90ProtoFilterMulticastFlag is multicastOnly, in which case any specification is valid.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	backbone(1), workGroup(2), allPorts(3)