DL-SLA-MIB

File: DL-SLA-MIB.mib (31548 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215

Imported symbols

enterprises IpAddress Counter
OBJECT-TYPE TRAP-TYPE

Defined Types

ConfigurationPerDLCIEntry  
SEQUENCE    
  configurationPerDLCITableIndex INTEGER
  commitedInformationRatePerDLCI INTEGER
  remoteDLCIPerDLCI INTEGER
  remoteIpAddressPerDLCI IpAddress
  thresholdForDelayMeasurementsPerDLCI INTEGER

DeliveryRatioPerDLCIEntry  
SEQUENCE    
  deliveryRatioPerDLCITableIndex INTEGER
  deliveryTableEncodedValue OCTET STRING
  deliveryTableTimestamp Counter
  fTCLperDLCI Counter
  fTELperDLCI Counter
  fRCLperDLCI Counter
  fRELperDLCI Counter
  fTCRperDLCI Counter
  fTERperDLCI Counter
  fRCRperDLCI Counter
  fRERperDLCI Counter
  fDRNumberOfSamplesTaken Counter
  fDRNumberOfThresholdViolations Counter
  dTCLperDLCI Counter
  dTELperDLCI Counter
  dRCLperDLCI Counter
  dRELperDLCI Counter
  dTCRperDLCI Counter
  dTERperDLCI Counter
  dRCRperDLCI Counter
  dRERperDLCI Counter
  dDRNumberOfSamplesTaken Counter
  dDRNumberOfThresholdViolations Counter
  txFDRTimestamp Counter
  txFDRNumberOfSamplesTaken Counter
  txFDRNumberOfThresholdViolations Counter
  rxFDRTimestamp Counter
  rxFDRNumberOfSamplesTaken Counter
  rxFDRNumberOfThresholdViolations Counter
  txDDRTimestamp Counter
  txDDRNumberOfSamplesTaken Counter
  txDDRNumberOfThresholdViolations Counter
  rxDDRTimestamp Counter
  rxDDRNumberOfSamplesTaken Counter
  rxDDRNumberOfThresholdViolations Counter
  txDiscardEligible Counter
  rxDiscardEligible Counter
  txFECN Counter
  rxFECN Counter
  txBECN Counter
  rxBECN Counter

DelayPerDLCIEntry  
SEQUENCE    
  delayPerDLCITableIndex INTEGER
  delayTableEncodedValue OCTET STRING
  delayTableTimestamp Counter
  totalRoundTripDelayPerDLCI Counter
  maximumRoundTripDelayNSamplesPerDLCI Counter
  maximumRoundTripDelay2NSamplesPerDLCI Counter
  maximumRoundTripDelay4NSamplesPerDLCI Counter
  numberOfDelayMeasurementsPerDLCI Counter
  delayNumberOfThresholdViolations Counter

OutagePerDLCIEntry  
SEQUENCE    
  outageTableIndex INTEGER
  outageTableEncodedValue OCTET STRING
  outageTableTimestamp Counter
  outageStatus INTEGER
  numberOfOutageCounter Counter
  periodOfOutages Counter
  numberOfExcludedOutageCounter Counter
  periodOfExcludedOutages Counter

Defined Values


dl-ServiceLevelAgreement 1.3.6.1.4.1.300.260
OBJECT IDENTIFIER    

dlcSLAConfigurationGroup 1.3.6.1.4.1.300.260.1
OBJECT IDENTIFIER    

unitSLAConfiguration 1.3.6.1.4.1.300.260.1.1
OBJECT IDENTIFIER    

configSLA 1.3.6.1.4.1.300.260.1.1.1
This object represents whether SLA is enabled or disabled on this unit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

unitSamplingPeriodForFDR-DDR 1.3.6.1.4.1.300.260.1.1.2
This object is to configure the sampling period in minutes for Frame Delivery Ratio and Data Delivery Ratio. The default is 1 minute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

unitSamplingPeriodForDelayMeasurement 1.3.6.1.4.1.300.260.1.1.3
This object is to configure the sampling period in minutes for Delay Measurements. The default is 1 minute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

unitThresholdForFDR 1.3.6.1.4.1.300.260.1.1.4
This object is to configure the threshold in one thousandth of a percentage for Frame Delivery Ratio. A value of 0 disables the trap altogether.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..99999  

unitThresholdForDDR 1.3.6.1.4.1.300.260.1.1.5
This object is to configure the threshold in one thousandth of a percentage for Data Delivery Ratio. A value of 0 disables the trap altogether.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..99999  

unitDelayMeasurementPacketSize 1.3.6.1.4.1.300.260.1.1.6
This object is to configure the size in bytes of Delay Measurement Packets, one size of all DLCIs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 50..1500  

unitOamDomainIdentifier 1.3.6.1.4.1.300.260.1.1.7
This object is the Domain Identifier for OA&M protocol. All end points participating in this SLA measurement must have the SAME OA&M Domain Identifier. The default is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

unitOamLocationIdentifier 1.3.6.1.4.1.300.260.1.1.8
This object is the Location Identifier for OA&M protocol. All end points participating in this SLA measurement must have a unique OA&M Location Identifier.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

perDLCIConfiguration 1.3.6.1.4.1.300.260.1.2
OBJECT IDENTIFIER    

configurationPerDLCITable 1.3.6.1.4.1.300.260.1.2.1
Configuration Table Per DLCI
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ConfigurationPerDLCIEntry

configurationPerDLCIEntry 1.3.6.1.4.1.300.260.1.2.1.1
An entry in the Configuration per DLCI table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ConfigurationPerDLCIEntry  

configurationPerDLCITableIndex 1.3.6.1.4.1.300.260.1.2.1.1.1
The index of Configuration Per DLCI table, which is DLCI number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

commitedInformationRatePerDLCI 1.3.6.1.4.1.300.260.1.2.1.1.2
This is the DLCI's Committed Information Rate (CIR). The CIR can be discovered automatically if LMI Rev 1.0 is used. If Annex A or Annex D is used, then the CIR must be entered manually in the DLCI table. The DLCI table is in the enterprise MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1536000  

remoteDLCIPerDLCI 1.3.6.1.4.1.300.260.1.2.1.1.3
DLCI of the far end unit on each DLCI, which is discovered using Frame Relay OA&M Protocol. It will be stored in volatile memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

remoteIpAddressPerDLCI 1.3.6.1.4.1.300.260.1.2.1.1.4
IP Address of the NET port of the far end unit on each DLCI, which is discovered using Frame Relay OA&M Protocol. It will be stored in volatile memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

thresholdForDelayMeasurementsPerDLCI 1.3.6.1.4.1.300.260.1.2.1.1.5
This object represents this DLCI's delay threshold in milliseconds. The default is 64000. A value of 0 disables the trap altogether.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..64000  

dlcSLAStatisticsGroup 1.3.6.1.4.1.300.260.2
OBJECT IDENTIFIER    

dlcDeliveryRatioStatistics 1.3.6.1.4.1.300.260.2.1
OBJECT IDENTIFIER    

deliveryRatioPerDLCITable 1.3.6.1.4.1.300.260.2.1.1
Lifetime Delivery counter Table Per DLCI, contains both Frame Delivery Ratio and Data Delivery Ratio.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DeliveryRatioPerDLCIEntry

deliveryRatioPerDLCIEntry 1.3.6.1.4.1.300.260.2.1.1.1
An entry in the Delivery Ratio table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DeliveryRatioPerDLCIEntry  

deliveryRatioPerDLCITableIndex 1.3.6.1.4.1.300.260.2.1.1.1.1
The index of Delivery Ratio Table, which is the same value as configurationPerDLCITableIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

deliveryTableEncodedValue 1.3.6.1.4.1.300.260.2.1.1.1.2
This object represents the value of the whole row of the table. If the table. The intent of object is to increase the efficiency of retrieving the table. For each object value in this table, which are all of Counter type, it will be represented with 4 bytes of data. The byte order of the Counter value will be MSB ... LSB. This object will contain the value of all objects on the table, except 'deliveryRatioPerDLCITableIndex'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

deliveryTableTimestamp 1.3.6.1.4.1.300.260.2.1.1.1.3
Timestamp of the last sample for delivery Entry statistics. Each time the near end of the DLCI receives Delivery Ratio Results Information Field, this number will contain the unit's current timestamp. A timestamp is a 32-bit number representing the number of seconds that have elapsed since 12:00AM, January 1, 1970.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

fTCLperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.4
Number of frames transmitted at the near end within CIR on this DLCI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fTELperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.5
Number of frames transmitted at the near end above CIR on this DLCI
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fRCLperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.6
Number of frames received at the near end on this DLCI within CIR. These frames will have the Discard Eligible (DE) bit reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fRELperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.7
Number of frames received at the near end on this DLCI above CIR. These frames will have the Discard Eligible (DE) bit set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fTCRperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.8
Number of frames transmitted at the far end within CIR on this DLCI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fTERperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.9
Number of frames transmitted at the far end above CIR on this DLCI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fRCRperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.10
Number of frames received at the far end on this DLCI within CIR. These frames will have the Discard Eligible (DE) bit reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fRERperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.11
Number of frames received at the far end on this DLCI above CIR. These frames will have the Discard Eligible (DE) bit set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fDRNumberOfSamplesTaken 1.3.6.1.4.1.300.260.2.1.1.1.12
Number of samples taken for Frame Delivery Statistics. Each time the near end receives the Frame Delivery Ratio Results Information Field, this counter will be incremented.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

fDRNumberOfThresholdViolations 1.3.6.1.4.1.300.260.2.1.1.1.13
Number of threshold violations for Frame Delivery. FDRCL = fRCRPerDLCI / fTCLPerDLCI FDRCR = fRCLPerDLCI / fTCRPerDLCI For each sample, FDRCL and FDRCR are compared to the threshold configured on object 'unitThresholdForFDR'. When either FDRCL or FDRCR is less than the threshold, this counter is incremented.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

dTCLperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.14
Number of bytes transmitted to the network within CIR on this DLCI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dTELperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.15
Number of bytes transmitted to the network above CIR on this DLCI
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dRCLperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.16
Number of bytes received at the near end on this DLCI within CIR. These frames will have the Discard Eligible (DE) bit reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dRELperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.17
Number of bytes received at the near end of this DLCI above CIR. These frames will have the Discard Eligible (DE) bit set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dTCRperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.18
Number of bytes transmitted at the far end within CIR on this DLCI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dTERperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.19
Number of bytes transmitted at the far end above CIR on this DLCI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dRCRperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.20
Number of bytes received at the far end on this DLCI above CIR. These frames will have the Discard Eligible (DE) bit reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dRERperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.21
Number of bytes received at the far end on his DLCI above CIR. These frames will have the Discard Eligible (DE) bit set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dDRNumberOfSamplesTaken 1.3.6.1.4.1.300.260.2.1.1.1.22
Number of samples taken for Data Delivery statistics. Each time the near end receives the Data Delivery Ratio Results Information Field, this counter will be incremented.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

dDRNumberOfThresholdViolations 1.3.6.1.4.1.300.260.2.1.1.1.23
Number of threshold violations for Data Delivery statistics. DDRCL = dRCRPerDLCI / dTCLPerDLCI DDRCR = dRCLPerDLCI / dTCRPerDLCI For each sample, DDRCL and DDRCR are compared to the threshold configured on object 'unitThresholdForDDR'. When either DDRCL or DDRCR is less than the threshold, this counter is incremented.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

txFDRTimestamp 1.3.6.1.4.1.300.260.2.1.1.1.24
Timestamp of the last sample for delivery Entry statistics. Each time the near end of the DLCI receives Delivery Ratio Results Information Field, this number will contain the unit's current timestamp. A timestamp is a 32-bit number representing the number of seconds that have elapsed since 12:00AM, January 1, 1970.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txFDRNumberOfSamplesTaken 1.3.6.1.4.1.300.260.2.1.1.1.25
Number of samples taken for Frame Delivery Statistics. Each time the near end receives the Frame Delivery Ratio Results Information Field, this counter will be incremented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txFDRNumberOfThresholdViolations 1.3.6.1.4.1.300.260.2.1.1.1.26
Number of threshold violations for Frame Delivery. FDRCL = fRCRPerDLCI / fTCLPerDLCI For each sample, FDRCL is compared to the threshold configured on object 'unitThresholdForFDR'. When FDRCL is less than the threshold, this counter is incremented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxFDRTimestamp 1.3.6.1.4.1.300.260.2.1.1.1.27
Timestamp of the last sample for delivery Entry statistics. Each time the near end of the DLCI receives Delivery Ratio poll, this number will contain the unit's current timestamp. A timestamp is a 32-bit number representing the number of seconds that have elapsed since 12:00AM, January 1, 1970.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxFDRNumberOfSamplesTaken 1.3.6.1.4.1.300.260.2.1.1.1.28
Number of samples taken for Frame Delivery Statistics. Each time the near end receives the Frame Delivery Ratio poll, this counter will be incremented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxFDRNumberOfThresholdViolations 1.3.6.1.4.1.300.260.2.1.1.1.29
Number of threshold violations for Frame Delivery. FDRCR = fRCLPerDLCI / fTCRPerDLCI For each sample, FDRCR is compared to the threshold configured on object 'unitThresholdForFDR'. When FDRCR is less than the threshold, this counter is incremented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txDDRTimestamp 1.3.6.1.4.1.300.260.2.1.1.1.30
Timestamp of the last sample for delivery Entry statistics. Each time the near end of the DLCI receives Delivery Ratio Results Information Field, this number will contain the unit's current timestamp. A timestamp is a 32-bit number representing the number of seconds that have elapsed since 12:00AM, January 1, 1970.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txDDRNumberOfSamplesTaken 1.3.6.1.4.1.300.260.2.1.1.1.31
Number of samples taken for DataDelivery Statistics. Each time the near end receives the Data Delivery Ratio Results Information Field, this counter will be incremented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txDDRNumberOfThresholdViolations 1.3.6.1.4.1.300.260.2.1.1.1.32
Number of threshold violations for Data Delivery. DDRCL = dRCRPerDLCI / dTCLPerDLCI For each sample, DDRCL is compared to the threshold configured on object 'unitThresholdForDDR'. When DDRCL is less than the threshold, this counter is incremented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxDDRTimestamp 1.3.6.1.4.1.300.260.2.1.1.1.33
Timestamp of the last sample for delivery Entry statistics. Each time the near end of the DLCI receives Delivery Ratio poll, this number will contain the unit's current timestamp. A timestamp is a 32-bit number representing the number of seconds that have elapsed since 12:00AM, January 1, 1970.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxDDRNumberOfSamplesTaken 1.3.6.1.4.1.300.260.2.1.1.1.34
Number of samples taken for Data Delivery Statistics. Each time the near end receives the Data Delivery Ratio poll, this counter will be incremented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxDDRNumberOfThresholdViolations 1.3.6.1.4.1.300.260.2.1.1.1.35
Number of threshold violations for Data Delivery. DDRCR = dRCLPerDLCI / dTCRPerDLCI For each sample, DDRCR is compared to the threshold configured on object 'unitThresholdForDDR'. When DDRCR is less than the threshold, this counter is incremented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txDiscardEligible 1.3.6.1.4.1.300.260.2.1.1.1.36
Number of Discard Eligible counters transmitted at the near end. This counter has the same value as object 'etherStatsFragments' in RMON MIB (RFC 1757) for DTE port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxDiscardEligible 1.3.6.1.4.1.300.260.2.1.1.1.37
Number of Discard Eligible counters received by the near end. This counter has the same value as object 'etherStatsFragments' in RMON MIB (RFC 1757) for DCE port
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txFECN 1.3.6.1.4.1.300.260.2.1.1.1.38
Number of FECN counters transmitted at the near end. This counter has the same value as object 'etherStatsCollisions' in RMON MIB (RFC 1757) for DTE port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxFECN 1.3.6.1.4.1.300.260.2.1.1.1.39
Number of FECN counters received by the near end. This counter has the same value as object 'etherStatsCollisions' in RMON MIB (RFC 1757) for DCE port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txBECN 1.3.6.1.4.1.300.260.2.1.1.1.40
Number of BECN counters transmitted at the near end. This counter has the same value as object 'etherStatsJabbers' in RMON MIB (RFC 1757) for DTE port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxBECN 1.3.6.1.4.1.300.260.2.1.1.1.41
Number of BECN counters received by the near end. This counter has the same value as object 'etherStatsJabbers' in RMON MIB (RFC 1757) for DCE port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dlcDelayStatistics 1.3.6.1.4.1.300.260.2.2
OBJECT IDENTIFIER    

delayPerDLCITable 1.3.6.1.4.1.300.260.2.2.1
Delay Table Per DLCI
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DelayPerDLCIEntry

delayPerDLCIEntry 1.3.6.1.4.1.300.260.2.2.1.1
An entry in the Delay per DLCI table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DelayPerDLCIEntry  

delayPerDLCITableIndex 1.3.6.1.4.1.300.260.2.2.1.1.1
The index of Delay Table, which is DLCI number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

delayTableEncodedValue 1.3.6.1.4.1.300.260.2.2.1.1.2
This object represents the value of the whole row of the table. If the table. The intent of object is to increase the efficiency of retrieving the table. For each object value in this table, which are all of Counter type, it will be represented with 4 bytes of data. The byte order of the Counter value will be MSB ... LSB. This object will contain the value of all objects on the table, except 'delayPerDLCITableIndex'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

delayTableTimestamp 1.3.6.1.4.1.300.260.2.2.1.1.3
Timestamp for Delay Table entry. Each time the near end of the DLCI receives an OA&M message containing a Frame Transfer Delay Information Field, this number will contain the unit's current timestamp. A timestamp is a 32-bit number representing the number of seconds that have elapsed since 12:00AM, January 1, 1970.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

totalRoundTripDelayPerDLCI 1.3.6.1.4.1.300.260.2.2.1.1.4
Sum of all the round trip delay measurements taken so far.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

maximumRoundTripDelayNSamplesPerDLCI 1.3.6.1.4.1.300.260.2.2.1.1.5
Maximum Round Trip Delay in last n samples. N is 15.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

maximumRoundTripDelay2NSamplesPerDLCI 1.3.6.1.4.1.300.260.2.2.1.1.6
Maximum Round Trip Delay in last 2N samples. N is 15.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

maximumRoundTripDelay4NSamplesPerDLCI 1.3.6.1.4.1.300.260.2.2.1.1.7
Maximum Round Trip Delay in last 4n samples. N is 15.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

numberOfDelayMeasurementsPerDLCI 1.3.6.1.4.1.300.260.2.2.1.1.8
Number of delay measurements per DLCI. Each time the near end receives an OA&M message containing a Frame Transfer Delay Information Field, this counter will be incremented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

delayNumberOfThresholdViolations 1.3.6.1.4.1.300.260.2.2.1.1.9
Number of threshold violations on Delay measurement. If an individual delay measurement on this DLCI is greater than the threshold value configured in object 'thresholdForDelayMeasurementPerDLCI', this counter will be incremented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dlcOutageStatistics 1.3.6.1.4.1.300.260.2.3
OBJECT IDENTIFIER    

outagePerDLCITable 1.3.6.1.4.1.300.260.2.3.1
Outage Table Per DLCI
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OutagePerDLCIEntry

outagePerDLCIEntry 1.3.6.1.4.1.300.260.2.3.1.1
An entry in the Outage per DLCI table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OutagePerDLCIEntry  

outageTableIndex 1.3.6.1.4.1.300.260.2.3.1.1.1
Index of Outage Table, which is the DLCI number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

outageTableEncodedValue 1.3.6.1.4.1.300.260.2.3.1.1.2
This object represents the value of the whole row of the table. If the table. The intent of object is to increase the efficiency of retrieving the table. For each object value in this table, which are all of Counter type, it will be represented with 4 bytes of data. The byte order of the Counter value will be MSB ... LSB. This object will contain the value of all objects on the table, except 'outageTableIndex'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

outageTableTimestamp 1.3.6.1.4.1.300.260.2.3.1.1.3
Timestamp of when this Outage Table entry last updated. A timestamp is a 32-bit number representing the number of seconds that have elapsed since 12:00AM, January 1, 1970.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

outageStatus 1.3.6.1.4.1.300.260.2.3.1.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), no-outage(2), excluded-outage(3), included-outage(4)  

numberOfOutageCounter 1.3.6.1.4.1.300.260.2.3.1.1.5
Number of outages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

periodOfOutages 1.3.6.1.4.1.300.260.2.3.1.1.6
The sum total of how long the outages are.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

numberOfExcludedOutageCounter 1.3.6.1.4.1.300.260.2.3.1.1.7
Number of excluded outages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

periodOfExcludedOutages 1.3.6.1.4.1.300.260.2.3.1.1.8
The sum total of how long excluded outages are.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

outageTableLastTimestamp 1.3.6.1.4.1.300.260.2.3.2
This object contains timestamp (in seconds) of the last time 'outagePerDLCITable' is updated (changed).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fDRThresholdTrap 1
This trap will be sent if 'fDRNumberOfThresholdViolations' is incremented. The VARIABLES contain the DLCI number whose Frame Delivery Ratio threshold violation is updated.
TRAP-TYPE    

dDRThresholdTrap 2
This trap will be sent if 'dDRNumberOfThresholdViolations' is incremented. The VARIABLES contain the DLCI number whose Data Delivery Ratio threshold violation is updated.
TRAP-TYPE    

delayThresholdTrap 3
This trap will be sent if 'delayNumberOfThresholdViolations' is incremented. The VARIABLES contain the DLCI number whose Delay threshold violation is updated.
TRAP-TYPE