DLINKSW-TC-MIB

File: DLINKSW-TC-MIB.mib (2694 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC DLINK-ID-REC-MIB

Imported symbols

MODULE-IDENTITY TEXTUAL-CONVENTION dlinkIndustrialCommon

Defined Types

DlinkTrigger  
The object defined by this textual convention can trigger an event. It always returns 'none(1)' when read the object.
TEXTUAL-CONVENTION    
  INTEGER none(1), action(2)  

Dlink2kVlanList  
This textual convention can specify a VLAN range of 2k VLANs, for example, 1 - 2048, 2049 - 4095, etc. Each octet within this value specifies a set of eight VLANs. The first octet specifies first 8 VLANs of the range specified in the description, the second octet specifies the next 8 VLANs, etc. Within each octet, the most significant bit represents the lowest numbered VLAN, and the least significant bit represents the highest numbered VLAN. Thus, each VLAN of the device is represented by a single bit within the value of this object. If the corresponding bit is '1' indicates that VLAN is included in the set of VLANs; '0' means the VLAN is not included. Note that if the length of this object is less than 256 octets, any 'missing' octets are assumed to contain the value zero.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..256)  

Defined Values

dlinkSwTextualConvention 1.3.6.1.4.1.171.14.1
The module defines textual conventions used for all proprietary MIBs.
MODULE-IDENTITY