DOCS-BPI-MIB

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
IF-MIB	DOCS-IF-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
Counter32	IpAddress	DisplayString
MacAddress	RowStatus	TruthValue
DateAndTime	OBJECT-GROUP	MODULE-COMPLIANCE
ifIndex	docsIfMib	docsIfCmServiceId
docsIfCmtsServiceId

Defined Types

DocsBpiCmBaseEntry
SEQUENCE
	docsBpiCmPrivacyEnable	TruthValue
	docsBpiCmPublicKey	OCTET STRING
	docsBpiCmAuthState	INTEGER
	docsBpiCmAuthKeySequenceNumber	Integer32
	docsBpiCmAuthExpires	DateAndTime
	docsBpiCmAuthReset	TruthValue
	docsBpiCmAuthGraceTime	Integer32
	docsBpiCmTEKGraceTime	Integer32
	docsBpiCmAuthWaitTimeout	Integer32
	docsBpiCmReauthWaitTimeout	Integer32
	docsBpiCmOpWaitTimeout	Integer32
	docsBpiCmRekeyWaitTimeout	Integer32
	docsBpiCmAuthRejectWaitTimeout	Integer32
	docsBpiCmAuthRequests	Counter32
	docsBpiCmAuthReplies	Counter32
	docsBpiCmAuthRejects	Counter32
	docsBpiCmAuthInvalids	Counter32
	docsBpiCmAuthRejectErrorCode	INTEGER
	docsBpiCmAuthRejectErrorString	DisplayString
	docsBpiCmAuthInvalidErrorCode	INTEGER
	docsBpiCmAuthInvalidErrorString	DisplayString

DocsBpiCmTEKEntry
SEQUENCE
	docsBpiCmTEKPrivacyEnable	TruthValue
	docsBpiCmTEKState	INTEGER
	docsBpiCmTEKExpiresOld	DateAndTime
	docsBpiCmTEKExpiresNew	DateAndTime
	docsBpiCmTEKKeyRequests	Counter32
	docsBpiCmTEKKeyReplies	Counter32
	docsBpiCmTEKKeyRejects	Counter32
	docsBpiCmTEKInvalids	Counter32
	docsBpiCmTEKAuthPends	Counter32
	docsBpiCmTEKKeyRejectErrorCode	INTEGER
	docsBpiCmTEKKeyRejectErrorString	DisplayString
	docsBpiCmTEKInvalidErrorCode	INTEGER
	docsBpiCmTEKInvalidErrorString	DisplayString

DocsBpiCmtsBaseEntry
SEQUENCE
	docsBpiCmtsDefaultAuthLifetime	Integer32
	docsBpiCmtsDefaultTEKLifetime	Integer32
	docsBpiCmtsDefaultAuthGraceTime	Integer32
	docsBpiCmtsDefaultTEKGraceTime	Integer32
	docsBpiCmtsAuthRequests	Counter32
	docsBpiCmtsAuthReplies	Counter32
	docsBpiCmtsAuthRejects	Counter32
	docsBpiCmtsAuthInvalids	Counter32

DocsBpiCmtsAuthEntry
SEQUENCE
	docsBpiCmtsAuthCmMacAddress	MacAddress
	docsBpiCmtsAuthCmPublicKey	OCTET STRING
	docsBpiCmtsAuthCmKeySequenceNumber	Integer32
	docsBpiCmtsAuthCmExpires	DateAndTime
	docsBpiCmtsAuthCmLifetime	Integer32
	docsBpiCmtsAuthCmGraceTime	Integer32
	docsBpiCmtsAuthCmReset	INTEGER
	docsBpiCmtsAuthCmRequests	Counter32
	docsBpiCmtsAuthCmReplies	Counter32
	docsBpiCmtsAuthCmRejects	Counter32
	docsBpiCmtsAuthCmInvalids	Counter32
	docsBpiCmtsAuthRejectErrorCode	INTEGER
	docsBpiCmtsAuthRejectErrorString	DisplayString
	docsBpiCmtsAuthInvalidErrorCode	INTEGER
	docsBpiCmtsAuthInvalidErrorString	DisplayString

DocsBpiCmtsTEKEntry
SEQUENCE
	docsBpiCmtsTEKLifetime	Integer32
	docsBpiCmtsTEKGraceTime	Integer32
	docsBpiCmtsTEKExpiresOld	DateAndTime
	docsBpiCmtsTEKExpiresNew	DateAndTime
	docsBpiCmtsTEKReset	TruthValue
	docsBpiCmtsKeyRequests	Counter32
	docsBpiCmtsKeyReplies	Counter32
	docsBpiCmtsKeyRejects	Counter32
	docsBpiCmtsTEKInvalids	Counter32
	docsBpiCmtsKeyRejectErrorCode	INTEGER
	docsBpiCmtsKeyRejectErrorString	DisplayString
	docsBpiCmtsTEKInvalidErrorCode	INTEGER
	docsBpiCmtsTEKInvalidErrorString	DisplayString

DocsBpiIpMulticastMapEntry
SEQUENCE
	docsBpiIpMulticastAddress	IpAddress
	docsBpiIpMulticastPrefixLength	Integer32
	docsBpiIpMulticastServiceId	Integer32
	docsBpiIpMulticastMapControl	RowStatus

DocsBpiMulticastAuthEntry
SEQUENCE
	docsBpiMulticastServiceId	Integer32
	docsBpiMulticastCmMacAddress	MacAddress
	docsBpiMulticastAuthControl	RowStatus

Defined Values

docsBpiMIB		1.3.6.1.2.1.10.127.5
This is the MIB Module for the DOCSIS Baseline Privacy Interface (BPI) at cable modems (CMs) and cable modem termination systems (CMTSs). CableLabs requires the implementation of this MIB in DOCSIS 1.0 cable modems that implement the Baseline Privacy Interface, as a prerequisite for DOCSIS 1.0 certification.
MODULE-IDENTITY

docsBpiMIBObjects		1.3.6.1.2.1.10.127.5.1
OBJECT IDENTIFIER

docsBpiCmObjects		1.3.6.1.2.1.10.127.5.1.1
OBJECT IDENTIFIER

docsBpiCmBaseTable		1.3.6.1.2.1.10.127.5.1.1.1
This table describes the basic and authorization-related Baseline Privacy attributes of each CM MAC interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DocsBpiCmBaseEntry

docsBpiCmBaseEntry		1.3.6.1.2.1.10.127.5.1.1.1.1
Each entry contains objects describing attributes of one CM MAC interface. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127).
Status: current	Access: not-accessible
OBJECT-TYPE
	DocsBpiCmBaseEntry

docsBpiCmPrivacyEnable		1.3.6.1.2.1.10.127.5.1.1.1.1.1
This object identifies whether this CM is provisioned to run Baseline Privacy. This is analogous to the presence (or absence) of the Baseline Privacy Configuration Setting option. The status of each individual SID with respect to Baseline Privacy is captured in the docsBpiCmTEKPrivacyEnable object.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

docsBpiCmPublicKey		1.3.6.1.2.1.10.127.5.1.1.1.1.2
The value of this object is a DER-encoded RSAPublicKey ASN.1 type string, as defined in the RSA Encryption Standard (PKCS #1) [22], corresponding to the public key of the CM. The 74, 106, 140, and 270 byte key encoding lengths correspond to 512 bit, 768 bit, 1024 bit, and 2048 public moduli respectively.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(74\|106\|140\|270)

docsBpiCmAuthState		1.3.6.1.2.1.10.127.5.1.1.1.1.3
The value of this object is the state of the CM authorization FSM. The start state indicates that FSM is in its initial state.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	authWait(2), authorized(3), reauthWait(4), authRejectWait(5)

docsBpiCmAuthKeySequenceNumber		1.3.6.1.2.1.10.127.5.1.1.1.1.4
The value of this object is the authorization key sequence number for this FSM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..15

docsBpiCmAuthExpires		1.3.6.1.2.1.10.127.5.1.1.1.1.5
The value of this object is the actual clock time when the current authorization for this FSM expires. If the CM does not have an active authorization, then the value is of the expiration date and time of the last active authorization.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

docsBpiCmAuthReset		1.3.6.1.2.1.10.127.5.1.1.1.1.6
Setting this object to TRUE generates a Reauthorize event in the authorization FSM. Reading this object always returns FALSE.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

docsBpiCmAuthGraceTime		1.3.6.1.2.1.10.127.5.1.1.1.1.7
The value of this object is the grace time for an authorization key. A CM is expected to start trying to get a new authorization key beginning AuthGraceTime seconds before the authorization key actually expires.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..1800

docsBpiCmTEKGraceTime		1.3.6.1.2.1.10.127.5.1.1.1.1.8
The value of this object is the grace time for a TEK. A CM is expected to start trying to get a new TEK beginning TEKGraceTime seconds before the TEK actually expires.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..1800

docsBpiCmAuthWaitTimeout		1.3.6.1.2.1.10.127.5.1.1.1.1.9
The value of this object is the Authorize Wait Timeout.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..30

docsBpiCmReauthWaitTimeout		1.3.6.1.2.1.10.127.5.1.1.1.1.10
The value of this object is the Reauthorize Wait Timeout in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..30

docsBpiCmOpWaitTimeout		1.3.6.1.2.1.10.127.5.1.1.1.1.11
The value of this object is the Operational Wait Timeout in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..10

docsBpiCmRekeyWaitTimeout		1.3.6.1.2.1.10.127.5.1.1.1.1.12
The value of this object is the Rekey Wait Timeout in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..10

docsBpiCmAuthRejectWaitTimeout		1.3.6.1.2.1.10.127.5.1.1.1.1.13
The value of this object is the Authorization Reject Wait Timeout in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..600

docsBpiCmAuthRequests		1.3.6.1.2.1.10.127.5.1.1.1.1.14
The value of this object is the count of times the CM has transmitted an Authorization Request message.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmAuthReplies		1.3.6.1.2.1.10.127.5.1.1.1.1.15
The value of this object is the count of times the CM has received an Authorization Reply message.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmAuthRejects		1.3.6.1.2.1.10.127.5.1.1.1.1.16
The value of this object is the count of times the CM has received an Authorization Reject message.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmAuthInvalids		1.3.6.1.2.1.10.127.5.1.1.1.1.17
The value of this object is the count of times the CM has received an Authorization Invalid message.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmAuthRejectErrorCode		1.3.6.1.2.1.10.127.5.1.1.1.1.18
The value of this object is the enumerated description of the Error-Code in most recent Authorization Reject message received by the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Authorization Reject message has been received since reboot.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), unknown(2), unauthorizedCm(3), unauthorizedSid(4)

docsBpiCmAuthRejectErrorString		1.3.6.1.2.1.10.127.5.1.1.1.1.19
The value of this object is the Display-String in most recent Authorization Reject message received by the CM. This is a zero length string if no Authorization Reject message has been received since reboot.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

docsBpiCmAuthInvalidErrorCode		1.3.6.1.2.1.10.127.5.1.1.1.1.20
The value of this object is the enumerated description of the Error-Code in most recent Authorization Invalid message received by the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Authorization Invalid message has been received since reboot.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), unknown(2), unauthorizedCm(3), unsolicited(5), invalidKeySequence(6), keyRequestAuthenticationFailure(7)

docsBpiCmAuthInvalidErrorString		1.3.6.1.2.1.10.127.5.1.1.1.1.21
The value of this object is the Display-String in most recent Authorization Invalid message received by the CM. This is a zero length string if no Authorization Invalid message has been received since reboot.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

docsBpiCmTEKTable		1.3.6.1.2.1.10.127.5.1.1.2
This table describes the attributes of each CM Traffic Encryption Key (TEK) association. The CM maintains (no more than) one TEK association per SID per CM MAC interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DocsBpiCmTEKEntry

docsBpiCmTEKEntry		1.3.6.1.2.1.10.127.5.1.1.2.1
Each entry contains objects describing the TEK association attributes of one SID. The CM MUST create one entry per unicast SID, regardless of whether the SID was obtained from a Registration Response message, or from an Authorization Reply message.
Status: current	Access: not-accessible
OBJECT-TYPE
	DocsBpiCmTEKEntry

docsBpiCmTEKPrivacyEnable		1.3.6.1.2.1.10.127.5.1.1.2.1.1
This object identifies whether this SID is provisioned to run Baseline Privacy. This is analogous to enabling Baseline Privacy on a provisioned SID using the Class-of-Service Privacy Enable option. Baseline Privacy is not effectively enabled for any SID unless Baseline Privacy is enabled for the CM, which is managed via the docsBpiCmPrivacyEnable object.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

docsBpiCmTEKState		1.3.6.1.2.1.10.127.5.1.1.2.1.2
The value of this object is the state of the indicated TEK FSM. The start(1) state indicates that FSM is in its initial state.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	start(1), opWait(2), opReauthWait(3), operational(4), rekeyWait(5), rekeyReauthWait(6)

docsBpiCmTEKExpiresOld		1.3.6.1.2.1.10.127.5.1.1.2.1.3
The value of this object is the actual clock time for expiration of the immediate predecessor of the most recent TEK for this FSM. If this FSM has only one TEK, then the value is the time of activation of this FSM.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

docsBpiCmTEKExpiresNew		1.3.6.1.2.1.10.127.5.1.1.2.1.4
The value of this object is the actual clock time for expiration of the most recent TEK for this FSM.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

docsBpiCmTEKKeyRequests		1.3.6.1.2.1.10.127.5.1.1.2.1.5
The value of this object is the count of times the CM has transmitted a Key Request message.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmTEKKeyReplies		1.3.6.1.2.1.10.127.5.1.1.2.1.6
The value of this object is the count of times the CM has received a Key Reply message, including a message whose authentication failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmTEKKeyRejects		1.3.6.1.2.1.10.127.5.1.1.2.1.7
The value of this object is the count of times the CM has received a Key Reject message, including a message whose authentication failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmTEKInvalids		1.3.6.1.2.1.10.127.5.1.1.2.1.8
The value of this object is the count of times the CM has received a TEK Invalid message, including a message whose authentication failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmTEKAuthPends		1.3.6.1.2.1.10.127.5.1.1.2.1.9
The value of this object is the count of times an Authorization Pending (Auth Pend) event occurred in this FSM.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmTEKKeyRejectErrorCode		1.3.6.1.2.1.10.127.5.1.1.2.1.10
The value of this object is the enumerated description of the Error-Code in most recent Key Reject message received by the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Key Reject message has been received since reboot.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), unknown(2), unauthorizedSid(4)

docsBpiCmTEKKeyRejectErrorString		1.3.6.1.2.1.10.127.5.1.1.2.1.11
The value of this object is the Display-String in most recent Key Reject message received by the CM. This is a zero length string if no Key Reject message has been received since reboot.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

docsBpiCmTEKInvalidErrorCode		1.3.6.1.2.1.10.127.5.1.1.2.1.12
The value of this object is the enumerated description of the Error-Code in most recent TEK Invalid message received by the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no TEK Invalid message has been received since reboot.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), unknown(2), invalidKeySequence(6)

docsBpiCmTEKInvalidErrorString		1.3.6.1.2.1.10.127.5.1.1.2.1.13
The value of this object is the Display-String in most recent TEK Invalid message received by the CM. This is a zero length string if no TEK Invalid message has been received since reboot.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

docsBpiCmtsObjects		1.3.6.1.2.1.10.127.5.1.2
OBJECT IDENTIFIER

docsBpiCmtsBaseTable		1.3.6.1.2.1.10.127.5.1.2.1
This table describes the basic Baseline Privacy attributes of each CMTS MAC interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DocsBpiCmtsBaseEntry

docsBpiCmtsBaseEntry		1.3.6.1.2.1.10.127.5.1.2.1.1
Each entry contains objects describing attributes of one CMTS MAC interface. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127).
Status: current	Access: not-accessible
OBJECT-TYPE
	DocsBpiCmtsBaseEntry

docsBpiCmtsDefaultAuthLifetime		1.3.6.1.2.1.10.127.5.1.2.1.1.1
The value of this object is the default lifetime, in seconds, the CMTS assigns to a new authorization key.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..6048000

docsBpiCmtsDefaultTEKLifetime		1.3.6.1.2.1.10.127.5.1.2.1.1.2
The value of this object is the default lifetime, in seconds, the CMTS assigns to a new Traffic Encryption Key (TEK).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..604800

docsBpiCmtsDefaultAuthGraceTime		1.3.6.1.2.1.10.127.5.1.2.1.1.3
This object was obsoleted because the provisioning system, not the CMTS, manages the authorization key grace time for DOCSIS CMs.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Integer32	1..1800

docsBpiCmtsDefaultTEKGraceTime		1.3.6.1.2.1.10.127.5.1.2.1.1.4
This object was obsoleted because the provisioning system, not the CMTS, manages the Traffic Encryption Key (TEK) grace time for DOCSIS CMs.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Integer32	1..1800

docsBpiCmtsAuthRequests		1.3.6.1.2.1.10.127.5.1.2.1.1.5
The value of this object is the count of times the CMTS has received an Authorization Request message from any CM.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmtsAuthReplies		1.3.6.1.2.1.10.127.5.1.2.1.1.6
The value of this object is the count of times the CMTS has transmitted an Authorization Reply message to any CM.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmtsAuthRejects		1.3.6.1.2.1.10.127.5.1.2.1.1.7
The value of this object is the count of times the CMTS has transmitted an Authorization Reject message to any CM.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmtsAuthInvalids		1.3.6.1.2.1.10.127.5.1.2.1.1.8
The value of this object is the count of times the CMTS has transmitted an Authorization Invalid message to any CM.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmtsAuthTable		1.3.6.1.2.1.10.127.5.1.2.2
This table describes the attributes of each CM authorization association. The CMTS maintains one authorization association with each Baseline Privacy-enabled CM on each CMTS MAC interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DocsBpiCmtsAuthEntry

docsBpiCmtsAuthEntry		1.3.6.1.2.1.10.127.5.1.2.2.1
Each entry contains objects describing attributes of one authorization association. The CMTS MUST create one entry per CM per MAC interface, based on the receipt of an Authorization Request message, and MUST not delete the entry before the CM authorization permanently expires.
Status: current	Access: not-accessible
OBJECT-TYPE
	DocsBpiCmtsAuthEntry

docsBpiCmtsAuthCmMacAddress		1.3.6.1.2.1.10.127.5.1.2.2.1.1
The value of this object is the physical address of the CM to which the authorization association applies.
Status: current	Access: not-accessible
OBJECT-TYPE
	MacAddress

docsBpiCmtsAuthCmPublicKey		1.3.6.1.2.1.10.127.5.1.2.2.1.2
The value of this object is a DER-encoded RSAPublicKey ASN.1 type string, as defined in the RSA Encryption Standard (PKCS #1) [22], corresponding to the public key of the CM. The 74, 106, 140, and 270 byte key encoding lengths correspond to 512 bit, 768 bit, 1024 bit, and 2048 public moduli respectively. This is a zero-length string if the CMTS does not retain the public key.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0\|74\|106\|140\|270)

docsBpiCmtsAuthCmKeySequenceNumber		1.3.6.1.2.1.10.127.5.1.2.2.1.3
The value of this object is the authorization key sequence number for this CM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..15

docsBpiCmtsAuthCmExpires		1.3.6.1.2.1.10.127.5.1.2.2.1.4
The value of this object is the actual clock time when the current authorization for this CM expires. If this CM does not have an active authorization, then the value is of the expiration date and time of the last active authorization.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

docsBpiCmtsAuthCmLifetime		1.3.6.1.2.1.10.127.5.1.2.2.1.5
The value of this object is the lifetime, in seconds, the CMTS assigns to an authorization key for this CM.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..6048000

docsBpiCmtsAuthCmGraceTime		1.3.6.1.2.1.10.127.5.1.2.2.1.6
The value of this object is the grace time for the authorization key in seconds. The CM is expected to start trying to get a new authorization key beginning AuthGraceTime seconds before the authorization key actually expires.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..1800

docsBpiCmtsAuthCmReset		1.3.6.1.2.1.10.127.5.1.2.2.1.7
Setting this object to invalidateAuth(2) causes the CMTS to invalidate the current CM authorization key, but not to transmit an Authorization Invalid message nor to invalidate unicast TEKs. Setting this object to sendAuthInvalid(3) causes the CMTS to invalidate the current CM authorization key, and to transmit an Authorization Invalid message to the CM, but not to invalidate unicast TEKs. Setting this object to invalidateTeks(4) causes the CMTS to invalidate the current CM authorization key, to transmit an Authorization Invalid message to the CM, and to invalidate all unicast TEKs associated with this CM authorization. Reading this object returns the most-recently-set value of this object, or returns noResetRequested(1) if the object has not been set since the last CMTS reboot.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	noResetRequested(1), invalidateAuth(2), sendAuthInvalid(3), invalidateTeks(4)

docsBpiCmtsAuthCmRequests		1.3.6.1.2.1.10.127.5.1.2.2.1.8
The value of this object is the count of times the CMTS has received an Authorization Request message from this CM.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmtsAuthCmReplies		1.3.6.1.2.1.10.127.5.1.2.2.1.9
The value of this object is the count of times the CMTS has transmitted an Authorization Reply message to this CM.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmtsAuthCmRejects		1.3.6.1.2.1.10.127.5.1.2.2.1.10
The value of this object is the count of times the CMTS has transmitted an Authorization Reject message to this CM.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmtsAuthCmInvalids		1.3.6.1.2.1.10.127.5.1.2.2.1.11
The value of this object is the count of times the CMTS has transmitted an Authorization Invalid message to this CM.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmtsAuthRejectErrorCode		1.3.6.1.2.1.10.127.5.1.2.2.1.12
The value of this object is the enumerated description of the Error-Code in most recent Authorization Reject message transmitted to the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Authorization Reject message has been transmitted to the CM.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), unknown(2), unauthorizedCm(3), unauthorizedSid(4)

docsBpiCmtsAuthRejectErrorString		1.3.6.1.2.1.10.127.5.1.2.2.1.13
The value of this object is the Display-String in most recent Authorization Reject message transmitted to the CM. This is a zero length string if no Authorization Reject message has been transmitted to the CM.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

docsBpiCmtsAuthInvalidErrorCode		1.3.6.1.2.1.10.127.5.1.2.2.1.14
The value of this object is the enumerated description of the Error-Code in most recent Authorization Invalid message transmitted to the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Authorization Invalid message has been transmitted to the CM.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), unknown(2), unauthorizedCm(3), unsolicited(5), invalidKeySequence(6), keyRequestAuthenticationFailure(7)

docsBpiCmtsAuthInvalidErrorString		1.3.6.1.2.1.10.127.5.1.2.2.1.15
The value of this object is the Display-String in most recent Authorization Invalid message transmitted to the CM. This is a zero length string if no Authorization Invalid message has been transmitted to the CM.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

docsBpiCmtsTEKTable		1.3.6.1.2.1.10.127.5.1.2.3
This table describes the attributes of each CM Traffic Encryption Key (TEK) association. The CMTS maintains one TEK association per BPI SID on each CMTS MAC interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DocsBpiCmtsTEKEntry

docsBpiCmtsTEKEntry		1.3.6.1.2.1.10.127.5.1.2.3.1
Each entry contains objects describing attributes of one TEK association on a particular CMTS MAC interface. The CMTS MUST create one entry per SID per MAC interface, based on the receipt of an Key Request message, and MUST not delete the entry before the CM authorization for the SID permanently expires.
Status: current	Access: not-accessible
OBJECT-TYPE
	DocsBpiCmtsTEKEntry

docsBpiCmtsTEKLifetime		1.3.6.1.2.1.10.127.5.1.2.3.1.1
The value of this object is the lifetime, in seconds, the CMTS assigns to keys for this TEK association.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..604800

docsBpiCmtsTEKGraceTime		1.3.6.1.2.1.10.127.5.1.2.3.1.2
The value of this object is the grace time for the TEK in seconds. The CM is expected to start trying to get a new TEK beginning TEKGraceTime seconds before the TEK actually expires.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..1800

docsBpiCmtsTEKExpiresOld		1.3.6.1.2.1.10.127.5.1.2.3.1.3
The value of this object is the actual clock time for expiration of the immediate predecessor of the most recent TEK for this FSM. If this FSM has only one TEK, then the value is the time of activation of this FSM.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

docsBpiCmtsTEKExpiresNew		1.3.6.1.2.1.10.127.5.1.2.3.1.4
The value of this object is the actual clock time for expiration of the most recent TEK for this FSM.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

docsBpiCmtsTEKReset		1.3.6.1.2.1.10.127.5.1.2.3.1.5
Setting this object to TRUE causes the CMTS to invalidate the current active TEK(s) (plural due to key transition periods), and to generate a new TEK for the associated SID; the CMTS MAY also generate an unsolicited TEK Invalid message, to optimize the TEK synchronization between the CMTS and the CM. Reading this object always returns FALSE.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

docsBpiCmtsKeyRequests		1.3.6.1.2.1.10.127.5.1.2.3.1.6
The value of this object is the count of times the CMTS has received a Key Request message.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmtsKeyReplies		1.3.6.1.2.1.10.127.5.1.2.3.1.7
The value of this object is the count of times the CMTS has transmitted a Key Reply message.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmtsKeyRejects		1.3.6.1.2.1.10.127.5.1.2.3.1.8
The value of this object is the count of times the CMTS has transmitted a Key Reject message.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmtsTEKInvalids		1.3.6.1.2.1.10.127.5.1.2.3.1.9
The value of this object is the count of times the CMTS has transmitted a TEK Invalid message.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

docsBpiCmtsKeyRejectErrorCode		1.3.6.1.2.1.10.127.5.1.2.3.1.10
The value of this object is the enumerated description of the Error-Code in the most recent Key Reject message sent in response to a Key Request for this BPI SID. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Key Reject message has been received since reboot.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), unknown(2), unauthorizedSid(4)

docsBpiCmtsKeyRejectErrorString		1.3.6.1.2.1.10.127.5.1.2.3.1.11
The value of this object is the Display-String in the most recent Key Reject message sent in response to a Key Request for this BPI SID. This is a zero length string if no Key Reject message has been received since reboot.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

docsBpiCmtsTEKInvalidErrorCode		1.3.6.1.2.1.10.127.5.1.2.3.1.12
The value of this object is the enumerated description of the Error-Code in the most recent TEK Invalid message sent in association with this BPI SID. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no TEK Invalid message has been received since reboot.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), unknown(2), invalidKeySequence(6)

docsBpiCmtsTEKInvalidErrorString		1.3.6.1.2.1.10.127.5.1.2.3.1.13
The value of this object is the Display-String in the most recent TEK Invalid message sent in association with this BPI SID. This is a zero length string if no TEK Invalid message has been received since reboot.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

docsBpiMulticastControl		1.3.6.1.2.1.10.127.5.1.2.4
OBJECT IDENTIFIER

docsBpiIpMulticastMapTable		1.3.6.1.2.1.10.127.5.1.2.4.1
This table describes the mapping of IP multicast address prefixes to multicast SIDs on each CMTS MAC interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DocsBpiIpMulticastMapEntry

docsBpiIpMulticastMapEntry		1.3.6.1.2.1.10.127.5.1.2.4.1.1
Each entry contains objects describing the mapping of one IP multicast address prefix to one multicast SID on one CMTS MAC interface. The CMTS uses the mapping when forwarding downstream IP multicast traffic.
Status: current	Access: not-accessible
OBJECT-TYPE
	DocsBpiIpMulticastMapEntry

docsBpiIpMulticastAddress		1.3.6.1.2.1.10.127.5.1.2.4.1.1.1
This object represents the IP multicast address (prefix) to be mapped by this row, in conjunction with docsBpiIpMulticastPrefixLength.
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddress

docsBpiIpMulticastPrefixLength		1.3.6.1.2.1.10.127.5.1.2.4.1.1.2
This object represents the IP multicast address prefix length for this row. The value of this object represents the length in bits of docsBpiIpMulticastAddress for multicast address comparisons, using big-endian ordering. An IP multicast address matches this row if the (docsBpiIpMulticastPrefixLength) most significant bits of the IP multicast address and of the (docsBpiIpMulticastAddress) are identical. This object is similar in usage to an IP address mask. The value 0 corresponds to IP address mask 0.0.0.0, the value 1 corresponds to IP address mask 128.0.0.0, the value 8 corresponds to IP address mask 255.0.0.0, and the value 32 corresponds to IP address mask 255.255.255.255.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..32

docsBpiIpMulticastServiceId		1.3.6.1.2.1.10.127.5.1.2.4.1.1.3
This object represents the multicast SID to be used in this IP multicast address prefix mapping entry.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	8192..16368

docsBpiIpMulticastMapControl		1.3.6.1.2.1.10.127.5.1.2.4.1.1.4
This object controls and reflects the IP multicast address prefix mapping entry. There is no restriction on the ability to change values in this row while the row is active.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

docsBpiMulticastAuthTable		1.3.6.1.2.1.10.127.5.1.2.4.2
This table describes the multicast SID authorization for each CM on each CMTS MAC interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DocsBpiMulticastAuthEntry

docsBpiMulticastAuthEntry		1.3.6.1.2.1.10.127.5.1.2.4.2.1
Each entry contains objects describing the key authorization of one cable modem for one multicast SID for one CMTS MAC interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	DocsBpiMulticastAuthEntry

docsBpiMulticastServiceId		1.3.6.1.2.1.10.127.5.1.2.4.2.1.1
This object represents the multicast SID for authorization.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	8192..16368

docsBpiMulticastCmMacAddress		1.3.6.1.2.1.10.127.5.1.2.4.2.1.2
This object represents the MAC address of the CM to which the multicast SID authorization applies.
Status: current	Access: not-accessible
OBJECT-TYPE
	MacAddress

docsBpiMulticastAuthControl		1.3.6.1.2.1.10.127.5.1.2.4.2.1.3
This object controls and reflects the CM authorization for each multicast SID. There is no restriction on the ability to change values in this row while the row is active.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

docsBpiNotification		1.3.6.1.2.1.10.127.5.2
OBJECT IDENTIFIER

docsBpiConformance		1.3.6.1.2.1.10.127.5.3
OBJECT IDENTIFIER

docsBpiCompliances		1.3.6.1.2.1.10.127.5.3.1
OBJECT IDENTIFIER

docsBpiGroups		1.3.6.1.2.1.10.127.5.3.2
OBJECT IDENTIFIER

docsBpiBasicCompliance		1.3.6.1.2.1.10.127.5.3.1.1
This is the compliance statement for devices which implement the DOCSIS Baseline Privacy Interface.
Status: current	Access: read-create
MODULE-COMPLIANCE

docsBpiCmGroup		1.3.6.1.2.1.10.127.5.3.2.1
This collection of objects provides CM BPI status and control.
Status: current	Access: read-create
OBJECT-GROUP

docsBpiCmtsGroup		1.3.6.1.2.1.10.127.5.3.2.2
This collection of objects provides CMTS BPI status and control.
Status: current	Access: read-create
OBJECT-GROUP

docsBpiObsoleteObjectsGroup		1.3.6.1.2.1.10.127.5.3.2.3
This is a collection of obsolete BPI objects.
Status: obsolete	Access: read-create
OBJECT-GROUP