DOT3-EFM-EPON-MIB

File: DOT3-EFM-EPON-MIB.mib (47958 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
SNMPv2-CONF

Imported symbols

MODULE-IDENTITY mib-2 OBJECT-TYPE
Counter32 Integer32 TruthValue
MacAddress ifIndex MODULE-COMPLIANCE
OBJECT-GROUP

Defined Types

Dot3MpcpEntry  
SEQUENCE    
  dot3MpcpID Integer32
  dot3MpcpOperStatus TruthValue
  dot3MpcpMode INTEGER
  dot3MpcpLinkID Integer32
  dot3MpcpRemoteMACAddress MacAddress
  dot3MpcpRegistrationState INTEGER
  dot3MpcpTransmitElapsed Integer32
  dot3MpcpReceiveElapsed Integer32
  dot3MpcpRoundTripTime Integer32
  dot3MpcpMaximumPendingGrants Integer32
  dot3MpcpAdminState TruthValue
  dot3MpcpOnTime Integer32
  dot3MpcpOffTime Integer32
  dot3MpcpSyncTime Integer32

Dot3MpcpStatEntry  
SEQUENCE    
  dot3MpcpMACCtrlFramesTransmitted Counter32
  dot3MpcpMACCtrlFramesReceived Counter32
  dot3MpcpDiscoveryWindowsSent Counter32
  dot3MpcpDiscoveryTimeout Counter32
  dot3MpcpTxRegRequest Counter32
  dot3MpcpRxRegRequest Counter32
  dot3MpcpTxRegAck Counter32
  dot3MpcpRxRegAck Counter32
  dot3MpcpTxReport Counter32
  dot3MpcpRxReport Counter32
  dot3MpcpTxGate Counter32
  dot3MpcpRxGate Counter32
  dot3MpcpTxRegister Counter32
  dot3MpcpRxRegister Counter32

Dot3OmpEmulationEntry  
SEQUENCE    
  dot3OmpEmulationID Integer32
  dot3OmpEmulationType INTEGER

Dot3OmpEmulationStatEntry  
SEQUENCE    
  dot3OmpEmulationSLDErrors Counter32
  dot3OmpEmulationCRC8Errors Counter32
  dot3OmpEmulationBadLLID Counter32
  dot3OmpEmulationGoodLLID Counter32
  dot3OmpEmulationOnuPonCastLLID Counter32
  dot3OmpEmulationOltPonCastLLID Counter32
  dot3OmpEmulationBroadcastBitNotOnuLlid Counter32
  dot3OmpEmulationOnuLLIDNotBroadcast Counter32
  dot3OmpEmulationBroadcastBitPlusOnuLlid Counter32
  dot3OmpEmulationNotBroadcastBitNotOnuLlid Counter32

Dot3EponMauEntry  
SEQUENCE    
  dot3EponMauPCSCodingViolation Counter32
  dot3EponMauFecAbility INTEGER
  dot3EponMauFecMode INTEGER
  dot3EponMauFECCorrectedBlocks Counter32
  dot3EponMauFECUncorrectableBlocks Counter32
  dot3EponMauBufferHeadCodingViolation Counter32

Defined Values

dot3EfmeponMIB 1.3.6.1.2.1.1
The objects in this MIB module are used to manage the Ethernet in the First Mile (EFM) Multi Point Control Protocol (MPCP) Interfaces as defined in IEEE P802.3 clause 64,65. The following reference is used throughout this MIB module: [802.3] refers to: IEEE Draft P802.3: 'Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Media Access Control Parameters, Physical Layers and Management Parameters for subscriber access networks', 8 December 2004. Of particular interest are Clause 64(MPCP) 65(P2MP RS) and 60 (PON PMDs). Clause 30, 'Management', and Clause 45, 'Management Data Input/Output (MDIO) Interface'. Copyright (C) The Internet Society (2005). This version of this MIB module is part of XXXX see the RFC itself for full legal notices.
MODULE-IDENTITY    

dot3MpcpMIB 1.3.6.1.2.1.1.1
OBJECT IDENTIFIER    

dot3MpcpObjects 1.3.6.1.2.1.1.1.1
OBJECT IDENTIFIER    

dot3MpcpConformance 1.3.6.1.2.1.1.1.2
OBJECT IDENTIFIER    

dot3MpcpTable 1.3.6.1.2.1.1.1.1.1
Table for dot3 Multi-Point Control Protocol (MPCP) MIB modules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot3MpcpEntry

dot3MpcpEntry 1.3.6.1.2.1.1.1.1.1.1
An entry in the dot3 MPCP MIB modules table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot3MpcpEntry  

dot3MpcpID 1.3.6.1.2.1.1.1.1.1.1.1
This variable is assigned so as to uniquely identify the Multi-Point MAC Control (MPCP) entity, as defined in [802.3] clause 64, among the subordinate managed objects of the containing object. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dot3MpcpOperStatus 1.3.6.1.2.1.1.1.1.1.1.2
This variable can be used to define the operational state of the Multi-Point MAC Control sublayer as defined in [802.3] clause 64. Selecting admin for an interface with Multi-Point MAC Control sublayer. When the attribute is True the the interface will act as if Multi-point control protocol is enabled. When the attribute is False the interface will act as if it does not have the Multi-point control protocol. The operational state can be changed using the dot3MpcpAdminState attribute. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dot3MpcpMode 1.3.6.1.2.1.1.1.1.1.1.3
This variable can be used to identify the operational state of the Multi-Point MAC Control sublayer as defined in [802.3] clause 64. Reading olt(1) for an OLT (server) mode and onu(2) for an ONU (client) mode. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER olt(1), onu(2)  

dot3MpcpLinkID 1.3.6.1.2.1.1.1.1.1.1.4
A read-only value that identifies the Logical Link identity (LLID) associated with the MAC port as specified in [802.3] clause 65.1.3.2.2. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dot3MpcpRemoteMACAddress 1.3.6.1.2.1.1.1.1.1.1.5
A read-only value that identifies the source_address parameter of the last MPCPDUs passed to the MAC Control. This value is updated on reception of a valid frame with (1) a destination Field equal to the reserved multicast address for MAC Control specified in [802.3] Annex 31A, (2) lengthOrType field value equal to the reserved Type for MAC Control as specified in [802.3] Annex 31A. (3) an MPCP subtype value equal to the subtype reserved for MPCP as specified in [802.3] Annex 31A. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

dot3MpcpRegistrationState 1.3.6.1.2.1.1.1.1.1.1.6
A read-only value that identifies the operational state of the Multi-Point MAC Control sublayer as defined in [802.3] clause 64. When this attribute has the enumeration unregistered(1) the interface may be used for registering a link partner. When this attribute has the enumeration registering(2) the interface is in the process of registering a link-partner. When this attribute has the enumeration registered(3) the interface has an established link-partner. This attribute is relevant for an OLT and an ONU. For the OLT it provides an indication per LLID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unregistered(1), registering(2), registered(3)  

dot3MpcpTransmitElapsed 1.3.6.1.2.1.1.1.1.1.1.7
A read-only value that reports the interval from last MPCP frame transmission in increments of Time Quanta (TQ) 16ns. The value returned shall be (interval from last MPCP frame transmission in ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dot3MpcpReceiveElapsed 1.3.6.1.2.1.1.1.1.1.1.8
A read-only value that reports the interval from last MPCP frame reception in increments of Time Quanta (TQ) 16ns. The value returned shall be (interval from last MPCP last MPCP frame reception in ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dot3MpcpRoundTripTime 1.3.6.1.2.1.1.1.1.1.1.9
A read-only value that reports the MPCP round trip time in increments of Time Quanta (TQ) 16ns. The value returned shall be (round trip time in ns)/16. If this value exceeds (2^16-1) the value (2^16-1) shall be returned. This attribute is relevant for an OLT only. For the OLT there is a value per LLID
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dot3MpcpMaximumPendingGrants 1.3.6.1.2.1.1.1.1.1.1.10
A read-only value that indicates the maximum number of grants an ONU can store. The maximum number of grants an ONU can store has a range of 0 to 255. This attribute is relevant for an OLT and an ONU. For the OLT there is a value per LLID
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

dot3MpcpAdminState 1.3.6.1.2.1.1.1.1.1.1.11
This variable can be used to define the operational state of the Multi-Point MAC Control sublayer as defined in [802.3] clause 64. Selecting admin for an interface with Multi-Point MAC Control sublayer. When selecting the value as True the interface Multi-Point control protocol is enabled. When selecting the value as False the interface acts as if the Multi-point Control protocol does not exist. Reading reflects the state of the attribute and the operation of the Multi-point control protocol mode of the interface. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dot3MpcpOnTime 1.3.6.1.2.1.1.1.1.1.1.12
A read-only value that reports the -on time- for a grant burst in increments of Time Quanta (TQ) 16ns as defined in [802.3] 60,64. The value returned shall be (on time ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. Value is 32 TQs. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dot3MpcpOffTime 1.3.6.1.2.1.1.1.1.1.1.13
A read-only value that reports the -off time- for a grant burst in increments of Time Quanta (TQ) 16ns as defined in [802.3] 60,64. The value returned shall be (off time ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. Value is 32 TQs. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dot3MpcpSyncTime 1.3.6.1.2.1.1.1.1.1.1.14
A read-only value that reports the -sync lock time- for an OLT receiver in increments of Time Quanta (TQ) 16ns as defined in [802.3] 60,64,65. The value returned shall be (sync lock time ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dot3MpcpStatTable 1.3.6.1.2.1.1.1.1.2
This table defines the list of statistics counters of [802.3] clause 64 MPCP interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot3MpcpStatEntry

dot3MpcpStatEntry 1.3.6.1.2.1.1.1.1.2.1
Table entries for table of statistics counters of [802.3] clause 64 MPCP interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot3MpcpStatEntry  

dot3MpcpMACCtrlFramesTransmitted 1.3.6.1.2.1.1.1.1.2.1.1
A count of MPCP frames passed to the MAC sublayer for transmission. This counter is incremented when a MA_CONTROL.request service primitive is generated within the MAC control sublayer with an opcode indicating a MPCP frame. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3MpcpMACCtrlFramesReceived 1.3.6.1.2.1.1.1.1.2.1.2
A count of MPCP frames passed by the MAC sublayer to the MAC Control sublayer. This counter is incremented when a ReceiveFrame function call returns a valid frame with: (1) a lengthOrType field value equal to the reserved Type for 802.3_MAC_Control as specified in 31.4.1.3, and (2) an opcode indicating a MPCP frame. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3MpcpDiscoveryWindowsSent 1.3.6.1.2.1.1.1.1.2.1.3
A count of discovery windows generated. The counter is incremented by one for each generated discovery window. This attribute is relevant for an OLT and an ONU. At the ONU value should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3MpcpDiscoveryTimeout 1.3.6.1.2.1.1.1.1.2.1.4
A count of the number of times a discovery timeout occurs. Increment the counter by one for each discovery processing state-machine reset resulting from timeout waiting for message arrival. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3MpcpTxRegRequest 1.3.6.1.2.1.1.1.1.2.1.5
A count of the number of times a REGISTER_REQ MPCP frames transmission occurs. Increment the counter by one for each REGISTER_REQ MPCP frame transmitted as defined in [802.3] clause 64. This counter is mandatory for an ONU. This attribute is relevant for an OLT and an ONU. At the OLT value should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3MpcpRxRegRequest 1.3.6.1.2.1.1.1.1.2.1.6
A count of the number of times a REGISTER_REQ MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER_REQ MPCP frame received for each LLID as defined in [802.3] clause 64. This counter is mandatory for an ONU and for an OLT. At the ONU value should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3MpcpTxRegAck 1.3.6.1.2.1.1.1.1.2.1.7
A count of the number of times a REGISTER_ACK MPCP frames transmission occurs. Increment the counter by one for each REGISTER_ACK MPCP frame transmitted as defined in [802.3] clause 64. This counter is mandatory for an ONU. This attribute is relevant for an OLT and an ONU. At the OLT the value should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3MpcpRxRegAck 1.3.6.1.2.1.1.1.1.2.1.8
A count of the number of times a REGISTER_ACK MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER_ACK MPCP frame received for each LLID, as defined in [802.3] clause 64. This counter is mandatory for an ONU and for an OLT. At the ONU the value should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3MpcpTxReport 1.3.6.1.2.1.1.1.1.2.1.9
A count of the number of times a REPORT MPCP frames transmission occurs. Increment the counter by one for each REPORT MPCP frame transmitted as defined in [802.3] clause 64. This counter is mandatory for an ONU. This attribute is relevant for an OLT and an ONU. At the OLT value should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3MpcpRxReport 1.3.6.1.2.1.1.1.1.2.1.10
A count of the number of times a REPORT MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REPORT MPCP frame received for each LLID, as defined in [802.3] clause 64. This counter is mandatory for an ONU and for an OLT. At the ONU value should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3MpcpTxGate 1.3.6.1.2.1.1.1.1.2.1.11
A count of the number of times a GATE MPCP frames transmission occurs. A set of counters, one for each LLID, at the OLT. Increment the counter by one for each GATE MPCP frame transmitted, for each LLID, as defined in [802.3] clause 64. This counter is mandatory for an OLT. This attribute is relevant for an OLT and an ONU. At the ONU the value should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3MpcpRxGate 1.3.6.1.2.1.1.1.1.2.1.12
A count of the number of times a GATE MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID ,at the OLT. Increment the counter by one for each GATE MPCP frame received, for each LLID, as defined in [802.3] clause 64. This counter is mandatory for an ONU and for an OLT. At the OLT the value should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3MpcpTxRegister 1.3.6.1.2.1.1.1.1.2.1.13
A count of the number of times a REGISTER MPCP frames transmission occurs. A set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER MPCP frame transmitted, for each LLID, as defined in [802.3] clause 64. This counter is mandatory for an OLT. This attribute is relevant for an OLT and an ONU. At the ONU the value should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3MpcpRxRegister 1.3.6.1.2.1.1.1.1.2.1.14
A count of the number of times a REGISTER MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER MPCP frame received, for each LLID, as defined in [802.3] clause 64. This counter is mandatory for an ONU and for an OLT. at the OLT the value should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3MpcpGroups 1.3.6.1.2.1.1.1.2.1
OBJECT IDENTIFIER    

dot3MpcpGroupBase 1.3.6.1.2.1.1.1.2.1.1
A collection of objects of dot3 Mpcp Basic entity state definition.
Status: current Access: read-only
OBJECT-GROUP    

dot3MpcpGroupParam 1.3.6.1.2.1.1.1.2.1.2
A collection of objects of dot3 Mpcp for P2MP parameters.
Status: current Access: read-only
OBJECT-GROUP    

dot3MpcpGroupStat 1.3.6.1.2.1.1.1.2.1.3
A collection of objects of dot3 Mpcp Statistics
Status: current Access: read-only
OBJECT-GROUP    

dot3MpcpCompliances 1.3.6.1.2.1.1.1.2.2
OBJECT IDENTIFIER    

dot3MPCPCompliance 1.3.6.1.2.1.1.1.2.2.1
The compliance statement for Multi-point control protocol interfaces.
Status: current Access: read-only
MODULE-COMPLIANCE    

dot3OmpEmulationMIB 1.3.6.1.2.1.1.2
OBJECT IDENTIFIER    

dot3OmpEmulationObjects 1.3.6.1.2.1.1.2.1
OBJECT IDENTIFIER    

dot3OmpeConformance 1.3.6.1.2.1.1.2.2
OBJECT IDENTIFIER    

dot3OmpEmulationTable 1.3.6.1.2.1.1.2.1.1
Table for dot3 OmpEmulation MIB modules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot3OmpEmulationEntry

dot3OmpEmulationEntry 1.3.6.1.2.1.1.2.1.1.1
An entry in the dot3 OmpEmulation MIB modules table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot3OmpEmulationEntry  

dot3OmpEmulationID 1.3.6.1.2.1.1.2.1.1.1.1
The value of dot3OmpEmulationID is assigned so as to uniquely identify a OMPEmulation entity among the subordinate managed objects of the containing object. The value is mandated for an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dot3OmpEmulationType 1.3.6.1.2.1.1.2.1.1.1.2
A read-only value that indicates that mode of operation of the Reconciliation Sublayer for Point to Point Emulation (see [802.3] clause 65.1). unknown(1) value is assigned in initializing, true state or type not yet known. olt(2) value is assigned when Sublayer operating in OLT mode. onu(3) value is assigned when Sublayer operating in ONU mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), olt(2), onu(3)  

dot3OmpEmulationStatTable 1.3.6.1.2.1.1.2.1.2
This table defines the list of statistics counters of [802.3] clause 65 OMP interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot3OmpEmulationStatEntry

dot3OmpEmulationStatEntry 1.3.6.1.2.1.1.2.1.2.1
Table entries for Table of statistics counters of [802.3] clause 65 OMP interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot3OmpEmulationStatEntry  

dot3OmpEmulationSLDErrors 1.3.6.1.2.1.1.2.1.2.1.1
A count of frames received that do not contain a valid SLD field as defined in [802.3] clause 65.1.3.3.1. This attribute is mandatory for an OLT and for an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3OmpEmulationCRC8Errors 1.3.6.1.2.1.1.2.1.2.1.2
A count of frames received that contain a valid SLD field, as defined in [802.3] clause 65.1.3.3.1, but do not pass the CRC-8 check as defined in [802.3] clause 65.1.3.3.3. This attribute is mandatory for an OLT and for an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3OmpEmulationBadLLID 1.3.6.1.2.1.1.2.1.2.1.3
A count of frames received that contain a valid SLD field, as defined in [802.3] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3] clause 65.1.3.3.3, but are discarded due to the LLID check as defined in [802.3] clause 65.1.3.3.2. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3OmpEmulationGoodLLID 1.3.6.1.2.1.1.2.1.2.1.4
A count of frames received that contain a valid SLD field, as defined in [802.3] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3] clause 65.1.3.3.3. This attribute is relevant for an OLT and an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3OmpEmulationOnuPonCastLLID 1.3.6.1.2.1.1.2.1.2.1.5
A count of frames received that contain a valid SLD field in an ONU, as defined in [802.3] 65.1.3.3.1, passes the CRC-8 check, as defined in [802.3] 65.1.3.3.3, and the frame meets the rule for acceptance defined in [802.3] 65.1.3.3.2.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3OmpEmulationOltPonCastLLID 1.3.6.1.2.1.1.2.1.2.1.6
A count of frames received that contain a valid SLD field in an OLT, as defined in [802.3] 65.1.3.3.1, passes the CRC-8 check, as defined in [802.3] 65.1.3.3.3, and the frame meets the rule for acceptance defined in [802.3] 65.1.3.3.2.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3OmpEmulationBroadcastBitNotOnuLlid 1.3.6.1.2.1.1.2.1.2.1.7
A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3] clause 65.1.3.3.3, and contain broadcast bit in LLID and not the ONU's LLID (frame accepted) as defined in [802.3] clause 65 . This attribute is mandatory for an OLT and for an ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3OmpEmulationOnuLLIDNotBroadcast 1.3.6.1.2.1.1.2.1.2.1.8
A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3] clause 65.1.3.3.3, and contain the ONU's LLID as defined in [802.3] clause 65. This attribute is mandatory for an ONU and mandatory for an OLT (a counter per LLID).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3OmpEmulationBroadcastBitPlusOnuLlid 1.3.6.1.2.1.1.2.1.2.1.9
A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3] clause 65.1.3.3.3, and contain the broadcast bit in LLID and the ONU's LLID (frame reflected) as defined in [802.3] clause 65. This attribute is mandatory for an ONU and mandatory for an OLT (a counter per LLID).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3OmpEmulationNotBroadcastBitNotOnuLlid 1.3.6.1.2.1.1.2.1.2.1.10
A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3] clause 65.1.3.3.3, and and does not contain the ONU's LLID as defined in [802.3] clause 65. This attribute is mandatory for an ONU
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3OmpeGroups 1.3.6.1.2.1.1.2.2.1
OBJECT IDENTIFIER    

dot3OmpeGroupID 1.3.6.1.2.1.1.2.2.1.1
A collection of objects of dot3 OMP emulation ID entity state definition.
Status: current Access: read-only
OBJECT-GROUP    

dot3OmpeGroupStat 1.3.6.1.2.1.1.2.2.1.2
A collection of objects of dot3 OMP emulation Statistics
Status: current Access: read-only
OBJECT-GROUP    

dot3OmpeCompliances 1.3.6.1.2.1.1.2.2.2
OBJECT IDENTIFIER    

dot3OmpeCompliance 1.3.6.1.2.1.1.2.2.2.1
The compliance statement for OMPEmulation interfaces.
Status: current Access: read-only
MODULE-COMPLIANCE    

dot3EponMauMIB 1.3.6.1.2.1.1.3
OBJECT IDENTIFIER    

dot3EponMauObjects 1.3.6.1.2.1.1.3.1
OBJECT IDENTIFIER    

dot3EponMauConformance 1.3.6.1.2.1.1.3.2
OBJECT IDENTIFIER    

dot3EponMauTable 1.3.6.1.2.1.1.3.1.1
Table for dot3 MAU EPON MIB modules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot3EponMauEntry

dot3EponMauEntry 1.3.6.1.2.1.1.3.1.1.1
An entry in the dot3 MAU EPON MIB modules table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot3EponMauEntry  

dot3EponMauPCSCodingViolation 1.3.6.1.2.1.1.3.1.1.1.1
For 100 Mb/ s operation it is a count of the number of times an invalid code-group is received, other than the /H/ code-group. For 1000 Mb/ s operation it is a count of the number of times an invalid codegroup is received, other than the /V/ code-group.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3EponMauFecAbility 1.3.6.1.2.1.1.3.1.1.1.2
A read-only value that indicates the support of operation of the 1000BASE-PX PHY optional FEC Sublayer for Forward error correction see [802.3] clause 65.2). unknown(1) value is assigned in initializing, for non FEC support state or type not yet known. nonsupported(2) value is assigned when Sublayer is not support. supported(3) value is assigned when Sublayer is supported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), nonsupported(2), supported(3)  

dot3EponMauFecMode 1.3.6.1.2.1.1.3.1.1.1.3
A read-write value that indicates the mode of operation of the 1000BASE-PX PHY optional FEC Sublayer for Forward error correction see [802.3] clause 65.2). A GET operation returns the current mode of operation the PHY. A SET operation changes the mode of operation of the PHY to the indicated value. unknown(1) value is assigned in initializing, for non FEC support state or type not yet known. disabled(2) value is assigned when Sublayer operating in disabled mode. enabled(3) value is assigned when Sublayer operating in FEC mode. writing can be done all the time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), disabled(2), enabled(3)  

dot3EponMauFECCorrectedBlocks 1.3.6.1.2.1.1.3.1.1.1.4
For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count of corrected FEC blocks. This counter will not increment for other PHY Types. Increment the counter by one for each received block that is corrected by the FEC function in the PHY.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3EponMauFECUncorrectableBlocks 1.3.6.1.2.1.1.3.1.1.1.5
For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count of uncorrectable FEC blocks. This counter will not increment for other PHY Types. Increment the counter by one for each FEC block that is determined to be uncorrectable by the FEC function in the PHY.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3EponMauBufferHeadCodingViolation 1.3.6.1.2.1.1.3.1.1.1.6
For 1000 Mbps operation it is a counts of the number of invalid code-group received directly from the link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot3EponMauGroups 1.3.6.1.2.1.1.3.2.1
OBJECT IDENTIFIER    

dot3EponMauGroupAll 1.3.6.1.2.1.1.3.2.1.1
A collection of objects of dot3 MAU definition.
Status: current Access: read-only
OBJECT-GROUP    

dot3EponMauGroupFEC 1.3.6.1.2.1.1.3.2.1.2
A collection of objects of FEC group definition.
Status: current Access: read-only
OBJECT-GROUP    

dot3EponMauCompliances 1.3.6.1.2.1.1.3.2.2
OBJECT IDENTIFIER    

dot3EponMauCompliance 1.3.6.1.2.1.1.3.2.2.1
The compliance statement for MAU EPON interfaces.
Status: current Access: read-only
MODULE-COMPLIANCE