DSR4410MD-MIB

File: DSR4410MD-MIB.mib (87830 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE IpAddress
DisplayString

Defined Values

dsr 1.3.6.1.4.1.1166.1.621
The managed objects for the dsr mib.
MODULE-IDENTITY    

org 1.3
OBJECT IDENTIFIER    

dod 1.3.6
OBJECT IDENTIFIER    

internet 1.3.6.1
OBJECT IDENTIFIER    

private 1.3.6.1.4
OBJECT IDENTIFIER    

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

giMIB 1.3.6.1.4.1.1166
OBJECT IDENTIFIER    

giproducts 1.3.6.1.4.1.1166.1
OBJECT IDENTIFIER    

videoMib 1.3.6.1.4.1.1166.1.621.1
OBJECT IDENTIFIER    

videoOutput525Lines 1.3.6.1.4.1.1166.1.621.1.1
The format of the output video that the unit renders when the unit is tuned to a 525 line video broadcast signal.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ntsc(0), palm(1)  

videoOutput625Lines 1.3.6.1.4.1.1166.1.621.1.2
The format of the output video that the unit renders when the unit is tuned to a 625 line video broadcast signal.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pal-d-g-b(0), pali(1), paln(2)  

aspectRatioInput 1.3.6.1.4.1.1166.1.621.1.3
The aspect ratio of the video that is carried in the broadcast signal.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ar4x3(0), ar16x9(1), unknown(2)  

aspectRatioOutput 1.3.6.1.4.1.1166.1.621.1.4
The aspect ratio of the output video signal.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ar4x3-Zoom(0), ar4x3-PanScan(1), ar4x3-LetterBox(2)  

rfPortsMib 1.3.6.1.4.1.1166.1.621.2
OBJECT IDENTIFIER    

rfPortsSetup 1.3.6.1.4.1.1166.1.621.2.1
OBJECT IDENTIFIER    

port1 1.3.6.1.4.1.1166.1.621.2.1.1
OBJECT IDENTIFIER    

port1SetupMode 1.3.6.1.4.1.1166.1.621.2.1.1.1
When the setup mode is set to manual the satellite name and polarity has to befined by the user. When the port mode is set to auto the Satellite name and polarity will be automatically set during the first channel change.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER manual(0), auto(1)  

port1Satellite 1.3.6.1.4.1.1166.1.621.2.1.1.2
A 2 to 3 character abbreviation of the name of the satellite to which the RF port is associated.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2..3)  

port1Polarity 1.3.6.1.4.1.1166.1.621.2.1.1.3
The polarity of the RF input applied to the RF port. The undefined value is not writeable; instead, undefined can only be set by the uplink.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER horizontal(0), vertical(1), notDefined(2)  

port2 1.3.6.1.4.1.1166.1.621.2.1.2
OBJECT IDENTIFIER    

port2SetupMode 1.3.6.1.4.1.1166.1.621.2.1.2.1
When the setup mode is set to manual the satellite name and polarity has to befined by the user. When the port mode is set to auto the Satellite name and polarity will be automatically set during the first channel change.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER manual(0), auto(1)  

port2Satellite 1.3.6.1.4.1.1166.1.621.2.1.2.2
A 2 to 3 character abbreviation of the name of the satellite to which the RF port is associated.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2..3)  

port2Polarity 1.3.6.1.4.1.1166.1.621.2.1.2.3
The polarity of the RF input applied to the RF port. The undefined value is not writeable; instead, undefined can only be set by the uplink.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER horizontal(0), vertical(1), notDefined(2)  

manualTune 1.3.6.1.4.1.1166.1.621.2.2
OBJECT IDENTIFIER    

activePort 1.3.6.1.4.1.1166.1.621.2.2.1
The RF port that is active during a manual tune.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER port1(0), port2(1), asiInput(8)  

mode 1.3.6.1.4.1.1166.1.621.2.2.2
The frequency plan of the satellite to which the unit tunes during installation. The unit accepts a C-Band satellite transponder number when the selection is xpndr. The unit accepts a discrete frequency value when the selection is lfreq
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER xpndr(0), lfreq(1)  

transponderNumber 1.3.6.1.4.1.1166.1.621.2.2.3
The transponder number to which the unit tunes during installation This in turn specifies the L-Band frequency to which the unit tunes during installation. This value is valid only when the FrequencyPlan selection is xpndr. Value -1 indicates its Not applicable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..24  

frequency 1.3.6.1.4.1.1166.1.621.2.2.4
The L-band frequency, in MHz, during a manual tune. A new manual tune is initiated when this object is set.This value is valid only of the Frequency Plan selection is lfreq. Value -1 indicates its Not applicable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 950..2150  

dvbSymbolRate 1.3.6.1.4.1.1166.1.621.2.2.5
The symbol-rate to be tuned to in units of sps. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..99999999  

dvbCodeRate 1.3.6.1.4.1.1166.1.621.2.2.6
The code rate of the channel being tuned to. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cr1-2(0), cr2-3(1), cr3-4(2), cr5-6(3), cr7-8(4)  

symbolCodeBit 1.3.6.1.4.1.1166.1.621.2.2.8
The symbol, code rate, and bitstream select combination during a manual tune. A new manual tune is initiated when this object is set. The symbol rate takes eight possible values: 29.3, 19.5, 14.6, 11.7, 9.76, 7.32, 4.88, and 3.25 Msps. The code rate also takes eight possible values: 7/8, 5/6, 4/5, 3/4, 2/3, 3/5, 1/2, and 5/11. The bitstream select takes two possible values: combined and split. Value -1 indicates its Not applicable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sr29Cm5-11Combined(0), sr29Cm1-2Combined(1), sr29Cm3-5Combined(2), sr29Cm2-3Combined(3), sr29Cm3-4Combined(4), sr29Cm4-5Combined(5), sr29Cm5-6Combined(6), sr29Cm7-8Combined(7), sr29Cm5-11Split(8), sr29Cm1-2Split(9), sr29Cm3-5Split(10), sr29Cm2-3Split(11), sr29Cm3-4Split(12), sr29Cm4-5Split(13), sr29Cm5-6Split(14), sr29Cm7-8Split(15), sr19Cm5-11Combined(16), sr19Cm1-2Combined(17), sr19Cm3-5Combined(18), sr19Cm2-3Combined(19), sr19Cm3-4Combined(20), sr19Cm4-5Combined(21), sr19Cm5-6Combined(22), sr19Cm7-8Combined(23), sr19Cm5-11Split(24), sr19Cm1-2Split(25), sr19Cm3-5Split(26), sr19Cm2-3Split(27), sr19Cm3-4Split(28), sr19Cm4-5Split(29), sr19Cm5-6Split(30), sr19Cm7-8Split(31), sr14Cm1-2Combined(32), sr14Cm3-5Combined(33), sr14Cm2-3Combined(34), sr14Cm3-4Combined(35), sr14Cm4-5Combined(36), sr14Cm5-6Combined(37), sr14Cm7-8Combined(38), sr11Cm1-2Combined(39), sr11Cm3-5Combined(40), sr11Cm2-3Combined(41), sr11Cm3-4Combined(42), sr11Cm4-5Combined(43), sr11Cm5-6Combined(44), sr11Cm7-8Combined(45), sr9Cm1-2Combined(46), sr9Cm3-5Combined(47), sr9Cm2-3Combined(48), sr9Cm3-4Combined(49), sr9Cm4-5Combined(50), sr9Cm5-6Combined(51), sr9Cm7-8Combined(52), sr7Cm1-2Combined(53), sr7Cm3-5Combined(54), sr7Cm2-3Combined(55), sr7Cm3-4Combined(56), sr7Cm4-5Combined(57), sr7Cm5-6Combined(58), sr7Cm7-8Combined(59), sr4Cm1-2Combined(60), sr4Cm3-5Combined(61), sr4Cm2-3Combined(62), sr4Cm3-4Combined(63), sr4Cm4-5Combined(64), sr4Cm5-6Combined(65), sr4Cm7-8Combined(66), sr3Cm1-2Combined(67), sr3Cm3-5Combined(68), sr3Cm2-3Combined(69), sr3Cm3-4Combined(70), sr3Cm4-5Combined(71), sr3Cm5-6Combined(72), sr3Cm7-8Combined(73)  

modulationMode 1.3.6.1.4.1.1166.1.621.2.2.9
The modulation mode to be used for the manual tune. A new manual tune is initiated when this object is set.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dciiManual(0), dvbManual(1), dciiAuto(2), manual8pskTC(3), manual8pskDvbS2(4)  

psk8SymbolRate 1.3.6.1.4.1.1166.1.621.2.2.10
The symbol-rate to be tuned to in units of sps. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1000000..30000000  

psk8CodeRate 1.3.6.1.4.1.1166.1.621.2.2.11
The code rate of the channel being tuned to. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cr2-3-192(0), cr3-4-205(1), cr3-4-211(2), cr3-4-219(3), cr5-6-230(4), cr8-9-240(5)  

dvbS2symbolRate 1.3.6.1.4.1.1166.1.621.2.2.12
The symbol-rate to be tuned to in units of sps. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1000000..33000000  

dvbS2codeRate 1.3.6.1.4.1.1166.1.621.2.2.13
The code rate of the channel being tuned to. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cr3-5(0), cr2-3(1), cr3-4(2), cr5-6(3), cr8-9(4), cr9-10(5)  

channelMib 1.3.6.1.4.1.1166.1.621.3
OBJECT IDENTIFIER    

channelSelect 1.3.6.1.4.1.1166.1.621.3.1
OBJECT IDENTIFIER    

vctID 1.3.6.1.4.1.1166.1.621.3.1.1
The virtual channel table number.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

channelNumber 1.3.6.1.4.1.1166.1.621.3.1.2
The virtual channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

channelStatus 1.3.6.1.4.1.1166.1.621.3.2
OBJECT IDENTIFIER    

transponder 1.3.6.1.4.1.1166.1.621.3.2.1
The current transponder name (alpha/numeric) as received from the uplink.A Blank string is returned if the name is not available .
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

source 1.3.6.1.4.1.1166.1.621.3.2.2
The name of the current source signal as received from the uplink.A Blank string is returned if the name is not available .
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

satelliteStatus 1.3.6.1.4.1.1166.1.621.3.2.3
The name of the current satellite as received from the uplink. A Blank string is returned if the name is not available .
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

serviceSelectionMib 1.3.6.1.4.1.1166.1.621.4
OBJECT IDENTIFIER    

mpegServiceNumber 1.3.6.1.4.1.1166.1.621.4.1
The MPEG service number which the IRD has to play.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

unitControlMib 1.3.6.1.4.1.1166.1.621.5
OBJECT IDENTIFIER    

unitControl 1.3.6.1.4.1.1166.1.621.5.1
OBJECT IDENTIFIER    

contrast 1.3.6.1.4.1.1166.1.621.5.1.1
The LCD contrast, with 0 representing the least contrast and 30 representing the most.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..30  

asiEnable 1.3.6.1.4.1.1166.1.621.5.1.3
Option to enable or disbale the ASI output. Note that lock-off is a read only value used by the uplink to lock asiEnable. It cannot be set via SNMP. Also, when this value is lock-off, this entire field is read only.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(0), off(1), lock-off(2)  

lnbPower 1.3.6.1.4.1.1166.1.621.5.1.6
Option to enable or disable LNB Power.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(0), off(1)  

resetIRD 1.3.6.1.4.1.1166.1.621.5.1.7
Option to reboot the box.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), powercycle(1)  

formatRate 1.3.6.1.4.1.1166.1.621.5.1.8
Format and rate of the ASI output
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER byte54(0), packet54(1), packet81(2), packet160(3), byte27(4), packet27(5)  

audioMib 1.3.6.1.4.1.1166.1.621.6
OBJECT IDENTIFIER    

audioConfig 1.3.6.1.4.1.1166.1.621.6.1
OBJECT IDENTIFIER    

audio1Config 1.3.6.1.4.1.1166.1.621.6.1.1
OBJECT IDENTIFIER    

audio1GainControl 1.3.6.1.4.1.1166.1.621.6.1.1.1
In audio gain control joint, only the left audio channel is edited. The right audio channel gain will be set to the left.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER joint(1)  

audio1LeftGain 1.3.6.1.4.1.1166.1.621.6.1.1.2
The left audio signal output level from -20 dB to 0 dB, in 1 dB increments.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -20..0  

audio1RightGain 1.3.6.1.4.1.1166.1.621.6.1.1.3
The right audio signal output level from -20 dB to 0 dB, in 1 dB increments.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -20..0  

audio1DiagNorm 1.3.6.1.4.1.1166.1.621.6.1.1.4
This varaiables enables and diables the audio dialog normalization
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

audio1DownMix 1.3.6.1.4.1.1166.1.621.6.1.1.5
The mode of the audio output. The unit downmixes the input audio to the selected channel mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mono(0), dualMono(1), stereo(2), surround(3)  

audio1Compression 1.3.6.1.4.1.1166.1.621.6.1.1.6
The degree of audio level compression.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), moderate(1), heavy(2)  

audio2Config 1.3.6.1.4.1.1166.1.621.6.1.2
OBJECT IDENTIFIER    

audio2GainControl 1.3.6.1.4.1.1166.1.621.6.1.2.1
In audio gain control joint, only the left audio channel is edited. The right audio channel gain will be set to the left.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER joint(1)  

audio2LeftGain 1.3.6.1.4.1.1166.1.621.6.1.2.2
The left audio signal output level from -20 dB to 0 dB, in 1 dB increments.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -20..0  

audio2RightGain 1.3.6.1.4.1.1166.1.621.6.1.2.3
The right audio signal output level from -20 dB to 0 dB, in 1 dB increments.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -20..0  

audio2DiagNorm 1.3.6.1.4.1.1166.1.621.6.1.2.4
This varaiables enables and diables the audio dialog normalization
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

audio2DownMix 1.3.6.1.4.1.1166.1.621.6.1.2.5
The mode of the audio output. The unit downmixes the input audio to the selected channel mode .
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mono(0), dualMono(1), stereo(2), surround(3)  

audio2Compression 1.3.6.1.4.1.1166.1.621.6.1.2.6
The degree of audio level compression.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), moderate(1), heavy(2)  

audioOutput 1.3.6.1.4.1.1166.1.621.6.2
OBJECT IDENTIFIER    

audio1Output 1.3.6.1.4.1.1166.1.621.6.2.1
OBJECT IDENTIFIER    

audio1LeftLanguage 1.3.6.1.4.1.1166.1.621.6.2.1.1
The language for the audio1 . This 5-character language string is formatted as three letters followed by two numbers. The 2-digit number represents the order of the 3-letter language in the service, e.g., eng01 denotes the second English component that is carried in the active service. The unit processes the default language when the preferred language setting is def (In this case the string is only 3 character wide). Note that the language string is converted to lower case automatically when this configuration is to be applied
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(3|5)  

audio1RightLanguage 1.3.6.1.4.1.1166.1.621.6.2.1.2
The language for the right audio channel when the AudioDownMix selection is dualMono. When the AudioDownMix is not dualMono the value mirrors the audio1LeftLanguage and any changes to this value does not have any effect. This is a 3(def) or 5(e.g., eng01) character string similar to the left language string. Note that the language string is converted to lower case automatically when this configuration is to be applied
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(3|5)  

audio1LeftLanguageStatus 1.3.6.1.4.1.1166.1.621.6.2.1.3
The language of the left audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio1LeftLanguage.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3|5)  

audio1RightLanguageStatus 1.3.6.1.4.1.1166.1.621.6.2.1.4
The language of the right audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio1LeftLanguage. Note that the language string is converted to lower case automatically when this configuration is to be applied
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3|5)  

audio2Output 1.3.6.1.4.1.1166.1.621.6.2.2
OBJECT IDENTIFIER    

audio2LeftLanguage 1.3.6.1.4.1.1166.1.621.6.2.2.1
The language for the audio1 . This 5-character language string is formatted as three letters followed by two numbers. The 2-digit number represents the order of the 3-letter language in the service, e.g., eng01 denotes the second English component that is carried in the active service. The unit processes the default language when the preferred language setting is def(in this case. string is 3 letters wide). Note that the language string is converted to lower case automatically when this configuration is to be applied
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(3|5)  

audio2RightLanguage 1.3.6.1.4.1.1166.1.621.6.2.2.2
The language for the right audio channel when the AudioDownMix selection is dualMono. When the AudioDownMix is not dualMono the value mirrors the audio2LeftLanguage and any changes to this value does not have any effect. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio2LeftLanguage. Note that the language string is converted to lower case automatically when this configuration is to be applied
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(3|5)  

audio2LeftLanguageStatus 1.3.6.1.4.1.1166.1.621.6.2.2.3
The language of the left audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio2LeftLanguage. Note that the language string is converted to lower case automatically when this configuration is to be applied
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3|5)  

audio2RightLanguageStatus 1.3.6.1.4.1.1166.1.621.6.2.2.4
The language of the right audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio2LeftLanguage. Note that the language string is converted to lower case automatically when this configuration is to be applied
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3|5)  

dataMib 1.3.6.1.4.1.1166.1.621.7
OBJECT IDENTIFIER    

dataStatus 1.3.6.1.4.1.1166.1.621.7.1
OBJECT IDENTIFIER    

ethernetIP 1.3.6.1.4.1.1166.1.621.7.1.1
Retrieves whether the select channel contains IP data, as defined in the downloaded network data from the uplink.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER defined(0), notDefined(1), unknown(2)  

textSetup 1.3.6.1.4.1.1166.1.621.7.2
OBJECT IDENTIFIER    

subtitleLanguage 1.3.6.1.4.1.1166.1.621.7.2.1
The selected subtitle track. Applicable when the selected channel carries multiple subtitle tracks. The 5-character string has the following representation: sssdd where sss = 3-char ISO 639 code for the subtitle language dd = 2-digits indicating the occurrence of the specified language 'ENG02' would select, for example, the subtitle track for the second occurrence of English subtitles. To turn the subtitle off, enter 'Off01' or 'Off00' at the browser. The user must enter the ordinal.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..5)  

subtitleLanguageStatus 1.3.6.1.4.1.1166.1.621.7.2.2
The subtitle language currently being presented by the IRD
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..5)  

subtitleDisplay 1.3.6.1.4.1.1166.1.621.7.2.3
The subtitle language currently being presented by the IRD
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(0), avail(1), status(2), off(3)  

ethernet10-100 1.3.6.1.4.1.1166.1.621.7.3
OBJECT IDENTIFIER    

ipAddress 1.3.6.1.4.1.1166.1.621.7.3.1
The IP address of the snmp port 1, in the common dotted-decimal format.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

subnetMask 1.3.6.1.4.1.1166.1.621.7.3.2
The subnet mask of the snmp port 1, in the dotted-decimal format.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

defaultGateway 1.3.6.1.4.1.1166.1.621.7.3.3
The IP address of the gateway that is used by the snmp port 1, in the dotted-decimal format.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

macAddr 1.3.6.1.4.1.1166.1.621.7.3.4
The ethernet 1 MAC address in hh:hh:hh:hh:hh:hh format.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(17)  

ethernetGigE 1.3.6.1.4.1.1166.1.621.7.4
OBJECT IDENTIFIER    

gigEipAddress 1.3.6.1.4.1.1166.1.621.7.4.1
The IP address of the gigE port, in the common dotted-decimal format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gigEsubnetMask 1.3.6.1.4.1.1166.1.621.7.4.2
The subnet mask of the gigE port, in the dotted-decimal format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gigEgateway 1.3.6.1.4.1.1166.1.621.7.4.3
The IP address of the gateway that is used by the gigE port, in the dotted-decimal format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gigEmacAddr 1.3.6.1.4.1.1166.1.621.7.4.4
The gigEthernet MAC address in hh:hh:hh:hh:hh:hh format.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(17)  

gigEmode 1.3.6.1.4.1.1166.1.621.7.4.5
The gigEthernet mode is one of the following values MPTS,disabled,TS-DSMCC or DSM-CC.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mpts(0), disabled(1), tsdsmcc(2), dsmcc(3)  

mptsIpAddr 1.3.6.1.4.1.1166.1.621.7.4.6
The MPTS IP address of the gigE port in the dotted-decimal format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

mptsPort 1.3.6.1.4.1.1166.1.621.7.4.7
The port associated with the MPTS IP address.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

extHardwareMib 1.3.6.1.4.1.1166.1.621.8
OBJECT IDENTIFIER    

alarms 1.3.6.1.4.1.1166.1.621.8.1
OBJECT IDENTIFIER    

alarmTrigger 1.3.6.1.4.1.1166.1.621.8.1.2
The trigger condition for which the alarm is activated. When the alarm is activated the Alarm LED illuminates and the alrm relay indicates an alarm condition. The alarm is activated for any of the following conditions 1. The tuner loses lock when the input is RF 2. The unit is not authorized to access the selected service 3. The unit loses video When Auto is selected the alarm activates for any of these conditions and when Disabled is selected the alarm does not activate for any condition.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noSignal(0), noVideoPresent(1), noAuthorization(2), auto(3), disabled(4)  

alarmTest 1.3.6.1.4.1.1166.1.621.8.1.3
A manual test of the alarm indicators. Setting ON places the unit in the alarm condition.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(0), off(1)  

statusMib 1.3.6.1.4.1.1166.1.621.9
OBJECT IDENTIFIER    

accessControl 1.3.6.1.4.1.1166.1.621.9.1
OBJECT IDENTIFIER    

unitAddress 1.3.6.1.4.1.1166.1.621.9.1.1
The unit's electronic address in the following format: ddd-ddddd-ddddd-ddd where d = decimal digit.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(19)  

tvPasscard 1.3.6.1.4.1.1166.1.621.9.1.2
The electronic address of the TV Pass Card, if present, in the unit address format. When no TV Pass Card is present the value returned is 'Not inserted'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(26)  

firmware 1.3.6.1.4.1.1166.1.621.9.2
OBJECT IDENTIFIER    

bootVersion 1.3.6.1.4.1.1166.1.621.9.2.1
The version of the boot code.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

fpgaVersion 1.3.6.1.4.1.1166.1.621.9.2.2
The version of the fpga.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

firmwareVersion 1.3.6.1.4.1.1166.1.621.9.2.3
The version of firmware code.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

upgradeFirmwareVersion 1.3.6.1.4.1.1166.1.621.9.2.4
The upgrade version of firmware code.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

diagnosticMib 1.3.6.1.4.1.1166.1.621.10
OBJECT IDENTIFIER    

screenDisplay 1.3.6.1.4.1.1166.1.621.10.1
OBJECT IDENTIFIER    

diagnosticScreen 1.3.6.1.4.1.1166.1.621.10.1.1
The diagnostic screen that is to be presented by the unit on the video output.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), fastFacts1(1), fastFacts2(2), fastFacts3(3), fastFacts4(4), fastFacts5(5), diagA(6), diagB(7), diagBMD(8), diagC(9), diagD(10), diagE(11)  

clearCounters 1.3.6.1.4.1.1166.1.621.10.1.2
Clears the counters in the on-screen diagnostics to zero.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

testSignals 1.3.6.1.4.1.1166.1.621.10.2
OBJECT IDENTIFIER    

videoTestPattern 1.3.6.1.4.1.1166.1.621.10.2.1
The full-field video test pattern that is presented by the unit on the video output.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), colorBar525(1), ire100Ramp(2), ntsc7Combination(3), redField(4), ntsc7Composite(5), fiveStepStair(6), unModulatedYRamp(7)  

audio1TestPattern 1.3.6.1.4.1.1166.1.621.10.2.2
The audio test signal that is outputted by the unit for audio 1. The following options are available: o 1000 Hz @ +16 dBm (for mono) o 4040, 3960 Hz @ + 4dBm each (for left and right) o OFF
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER testToneA-1000(0), testToneB-4040-3960(1), off(2)  

audio2TestPattern 1.3.6.1.4.1.1166.1.621.10.2.3
See the DESCRIPTION for the audio1TestPattern object.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER testToneA-1000(0), testToneB-4040-3960(1), off(2)  

cueToneSignal 1.3.6.1.4.1.1166.1.621.10.2.4
The cue tone test signal.The unit generates a cue test tone sequence consisting of 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, *, #, A, B, C, D. The unit repeats the cue test tone sequence when enabled. The unit generates a cue tone test tone sequence with a 50 msec tone and inter-tone duration, a 2 second interval between sequences, and immediate activation. When the users set it to On via SNMP. Cuetones are played continuously.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

vits 1.3.6.1.4.1.1166.1.621.10.3
OBJECT IDENTIFIER    

waveform 1.3.6.1.4.1.1166.1.621.10.3.1
The VITS test pattern that is presented by the unit on the the video output.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER transmitted(0), disabled(1), colorBar525(2), ire100Ramp(3), ntsc7Combination(4), redField(5), ntsc7Composite(6), fiveStepStair(7), unModulatedYRamp(8)  

field 1.3.6.1.4.1.1166.1.621.10.3.2
The field on which the VITS test pattern is presented by the unit on the video output. 'n/a' is a read-only value that the unit returns when the waveform object is set to 'transmitted' or 'disabled'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER field1(0), field2(1), na(2)  

line 1.3.6.1.4.1.1166.1.621.10.3.3
The line into which the VITS test pattern is presented by the unit on the video output. 'n/a' is a read-only value that the unit returns when the waveform object is set to 'transmitted' or 'disabled'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER line17(0), line18(1), na(2)  

signalStatus 1.3.6.1.4.1.1166.1.621.11
OBJECT IDENTIFIER    

acquisitionState 1.3.6.1.4.1.1166.1.621.11.1
The acquisition state for the active signal
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unLocked(1)  

authorizationState 1.3.6.1.4.1.1166.1.621.11.2
The authorization state for viewing the current signal. This object mirrors the 'Auth State' field in the Fast Facts 1 OSD.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER missingMap(0), undefinedChannel(1), undefinedService(2), notInSync(3), noProgramRekey(4), noWorkingKey(5), noEventBlackOut(6), noCategoryKey(7), oldCategorySequence(8), programBought(9), programBoughtWithoutTaping(10), subscribedWithTaping(11), subscribedWithoutTaping(12), subscribedWithTapingPurchasable(13), ippvWithTaping(14), ippvWithoutTaping(15), badSeedChecksum(16), badDebitChecksum(17), ippvNotEnabled(18), insufficientCreditToPurchase(19), showCountLimitExceeded(20), debitRegisterWillOverflow(21), noAnytimeFreePreviewRecordsAvailable(22), maximumPackageCostExceeded(23), noIPPVOverlayInMessage(24), notSubscribed(25), regionalBlackout(26), eventBlackout(27), circulatBlackout(28), authorized(29), unencrypted(30), unknown(31)  

encryptionMode 1.3.6.1.4.1.1166.1.621.11.3
The encryption mode of the current signal. This object mirrors the 'Encryption' field in the Fast Facts 1 OSD.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER encrypted(0), fixedWorkingKey(1), fixedProgramKey(2), unencrypted(3), na(4)  

unitAddr 1.3.6.1.4.1.1166.1.621.11.4
The unit's electronic address in the following format: ddd-ddddd-ddddd-ddd where d = decimal digit. This object mirrors the 'Unit' field in the Fast Facts 1 OSD.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(19)  

vctIDFast 1.3.6.1.4.1.1166.1.621.11.5
The current virtual channel table number. This object mirrors the 'VCT ID' field in the Fast Facts 1 OSD.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

channelNum 1.3.6.1.4.1.1166.1.621.11.6
The virtual channel number of the current signal. This object mirrors the 'VC #' field in the Fast Facts 1 OSD.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4095  

serviceNumber 1.3.6.1.4.1.1166.1.621.11.7
The MPEG-2 service number, as indicated in the virtual channel map, for the current signal. This object mirrors the 'Service #' field in the Fast Facts 1 OSD.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

signalQuality 1.3.6.1.4.1.1166.1.621.11.8
The RF quality level of the current signal. This object mirrors the 'Signal Quality' field in the Fast Facts 1 OSD.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

signalPower 1.3.6.1.4.1.1166.1.621.11.9
The RF power level of the current signal, and measured in units of 0.1 dBm. For example, '-650' represents -65.0 dBm.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -800..0  

ebNo 1.3.6.1.4.1.1166.1.621.11.10
The signal to noise ration, Eb/No, of the current signal, and measured in units of 0.1 dB. For example, '-20' represents -2.0 dB '150' represents +15.0 dB This object mirrors the 'Eb/No' field in the Fast Facts 1 OSD.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -30..150  

symbolRate 1.3.6.1.4.1.1166.1.621.11.11
The symbol rate of the current signal. This object mirrors the 'Symbol Rate' field in the Fast Facts 1 OSD.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER sr29Msps(0), sr19Msps(1), sr14Msps(2), sr11Msps(3), sr9Msps(4), sr7Msps(5), sr4Msps(6), sr3Msps(7), unknown(8)  

fecRate 1.3.6.1.4.1.1166.1.621.11.12
The FEC rate of the current signal. This object mirrors the 'FEC Rate' field in the Fast Facts 1 OSD.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cr5-11(0), cr1-2(1), cr1-92-8PSK(2), cr3-5(3), cr2-05-8PSK(4), cr2-3(5), cr2-11-8PSK(6), cr3-4(7), cr4-5(8), cr5-6(9), cr2-19-8PSK(10), cr7-8(11), cr2-30-8PSK(12), cr2-40-8PSK(13), unknown(14)  

freq 1.3.6.1.4.1.1166.1.621.11.13
The frequency of the L-band signal, in kHz, that is applied to the antenna connector on the unit's back panel. This object mirrors the 'Frequency' field in the Fast Facts 1 OSD.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 950000..2150000  

satelliteName 1.3.6.1.4.1.1166.1.621.11.14
A 2 to 4 character satellite reference name, as indicated in the virtual channel map, for the current signal. This object mirrors the 'Sat' field in the Fast Facts 1 OSD.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..4)  

xpndrNumber 1.3.6.1.4.1.1166.1.621.11.15
The transponder number of the satellite, as indicated in the virtual channel map, for the current signal. A value of zero indicates the first transponder, and so on. This object mirrors the '/Xpndr' field in the Fast Facts 1 OSD.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

polarization 1.3.6.1.4.1.1166.1.621.11.16
The polarization, as indicated in the virtual channel map, for the current signal. This object mirrors the 'Polarization' field in the Fast Facts 1 OSD.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER h(0), v(1), unknown(2)  

muxStatus 1.3.6.1.4.1.1166.1.621.11.17
The multiplex format of the active L-Band signal
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER combined(0), split(1), unknown(2)  

ledStatus 1.3.6.1.4.1.1166.1.621.12
OBJECT IDENTIFIER    

signalLED 1.3.6.1.4.1.1166.1.621.12.1
The Signal LED is on (illuminated) when the unit recognizes the signal as a DigiCipher II signal. This object mirrors the LED on the front panel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1), blink(2)  

authorizedLED 1.3.6.1.4.1.1166.1.621.12.2
The Authorized LED is on (illuminated) when the Signal LED is on and either (1) the programmer has transmitted the access messages to allow the unit to decrypt the signal or (2) the signal has been transmitted in an unencrypted of fixed encrypted mode. This object mirrors the LED on the front panel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1), blink(2)  

alarmConditionLED 1.3.6.1.4.1.1166.1.621.12.3
The Alarm condition LED is on (illuminated) when the IRD is in alarm state
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1), blink(2)  

downloadLED 1.3.6.1.4.1.1166.1.621.12.8
The Download LED is on ( illuminated ) when an active download is in progress
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1), blink(2)  

retuneMonitorMIB 1.3.6.1.4.1.1166.1.621.13
OBJECT IDENTIFIER    

retuneMonitorEnable 1.3.6.1.4.1.1166.1.621.13.1
Enables retune monitoring by the IRD. When read, this leaf provides the actual enable/disable status of the retune monitoring function in the IRD, and not just the last value that was written to this leaf. The IRD resets retuneMsgStatistic and all entries in the retuneMsgTable each time it receives an enable message; toggling enable/disable/enable is not required for this reset.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

retuneMsgStatistic 1.3.6.1.4.1.1166.1.621.13.2
The total number of new retune messages. This counter is incremented whenever the IRD detects a new retune message, but is not incremented by each instance (duplicate) of a retune message. This counter provides a useful troubleshooting tool for determining whether the IRD is detecting any retune messages. Range = 0x0000 - 0xFFFF. Note: This counter is not incremented for every possible retune message. This counter is only incremented when a retune becomes active. The IRD ignores retune messages in which the activation time is still in the future. The IRD also ignores any retune message if the activation time is further in the past than the current retune for the same virtual network.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

retuneMsgVirtNetworkIDindex 1.3.6.1.4.1.1166.1.621.13.3
A table of retune messages is indexed by this target virtual network ID. This table does not have entries for each instance (duplicate) of a retune message that the IRD receives because the uplink repeatedly broadcasts instances of each retune message for the duration of the virtual network program. Instead, this table presents select metrics describing the retune message, as described below. Each table entry pertains to the most recent active retune message. A retune message is considered active when the activation time is in the past. The IRD replaces the current retuneMsgEntry when a new retune message is received having an activation time that is in the past but nearer to the present time than is the activation time of the current retuneMsgEntry. The IRD ignores retune messages in which the activation time is in the future. The virtual network ID indicates which retune message is targeted. This leaf serves as the index for the table. Make sure this index is set prior to accessing the following retune message parameters. Range = 1 - 256.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

retuneMsgVCTid 1.3.6.1.4.1.1166.1.621.13.4
The target virtual channel map ID of the most recent active retune message. Range = 0 - 0xFFFF.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

retuneMsgVirtChannel 1.3.6.1.4.1.1166.1.621.13.5
The target virtual channel of the most recent active retune message. Range = 0 - 4095.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

retuneMsgActivationTime 1.3.6.1.4.1.1166.1.621.13.6
The activation time of the most recent active retune message. The activation time is a 32-bit count of GPS seconds since January 6, 1980, representing the time at which the retune is scheduled to occur. Past activation times are interpreted as immediate activation.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..4)  

retuneMsgCRC 1.3.6.1.4.1.1166.1.621.13.7
The 4-byte CRC value of the most recent active retune message.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..4)  

retuneMsgCnt 1.3.6.1.4.1.1166.1.621.13.8
The total number of instances that the IRD has received for the most recent active retune message. Range = 0 - 0xFFFF. Note: this counter is incremented when a retune message is received for which the CRC of that retune message matches the CRC of the current retune message (i.e., the value of retuneMsgCRC).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

identificationGroup 1.3.6.1.4.1.1166.1.621.14
OBJECT IDENTIFIER    

identMIBVersion 1.3.6.1.4.1.1166.1.621.14.1
The version number of this MIB.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

identUnitModel 1.3.6.1.4.1.1166.1.621.14.2
The unit model of this IRD.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpMib 1.3.6.1.4.1.1166.1.621.15
OBJECT IDENTIFIER    

acpMode 1.3.6.1.4.1.1166.1.621.15.1
Setup mode for the authorization control processor.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), manual(1)  

acpIndex 1.3.6.1.4.1.1166.1.621.15.2
Number uniquely identifying the ACP and keystream pair.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

acpProgram 1.3.6.1.4.1.1166.1.621.15.3
The MPEG service number of the program.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

acpUnitAddress 1.3.6.1.4.1.1166.1.621.15.4
The electronic address of the selected ACP in the following format: ddd-ddddd-ddddd where d = decimal digit.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(15)  

acpKeyStream 1.3.6.1.4.1.1166.1.621.15.5
The selected keystream.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

acpAuthState 1.3.6.1.4.1.1166.1.621.15.6
This field displays the authorization status of the ACP for the current Service association. AU -- Authorization NA -- Not Authorized The unit presents dashes when no information is available
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

acpEncryptMode 1.3.6.1.4.1.1166.1.621.15.7
This field displays the Encryption Mode of the service being decrypted by the selected ACP. The different values are FP - Fixed Program Key FW - Fixed Working Key S - Scrambled ZK - Unencrypted The unit presents dashes when no information is available
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..2)  

testMib 1.3.6.1.4.1.1166.1.621.16
OBJECT IDENTIFIER    

audio 1.3.6.1.4.1.1166.1.621.16.1
OBJECT IDENTIFIER    

primaryAudioLock 1.3.6.1.4.1.1166.1.621.16.1.1
Gives Primary Audio is locked or not
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unLocked(0), locked(1)  

secondaryAudioLock 1.3.6.1.4.1.1166.1.621.16.1.2
Gives Secondary Audio is locked or not
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unLocked(0), locked(1)  

primaryAudioPID 1.3.6.1.4.1.1166.1.621.16.1.4
Gives Primary Audio PID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..8191  

secondaryAudioPID 1.3.6.1.4.1.1166.1.621.16.1.5
Gives Secondary Audio PID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..8191  

video 1.3.6.1.4.1.1166.1.621.16.2
OBJECT IDENTIFIER    

videoLock 1.3.6.1.4.1.1166.1.621.16.2.1
Gives Video is locked or not
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unLocked(0), locked(1)  

videoPID 1.3.6.1.4.1.1166.1.621.16.2.2
Gives video PID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..8191  

codeDownload 1.3.6.1.4.1.1166.1.621.16.3
OBJECT IDENTIFIER    

codeDownloadBit 1.3.6.1.4.1.1166.1.621.16.3.1
Monitor the Code Download process 0 - off 1 - on
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

irdStatus 1.3.6.1.4.1.1166.1.621.16.4
OBJECT IDENTIFIER    

falseLock 1.3.6.1.4.1.1166.1.621.16.4.1
OBJECT IDENTIFIER    

falseLockStatus 1.3.6.1.4.1.1166.1.621.16.4.1.1
Checks for false lock
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unLocked(0), locked(1)  

alarmLedStatus 1.3.6.1.4.1.1166.1.621.16.4.2
OBJECT IDENTIFIER    

alarmLEDBlinkStatus 1.3.6.1.4.1.1166.1.621.16.4.2.1
0 - LED is not blinking(OFF/ON) 1 - LED is blinking
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notBlinking(0), blinking(1)  

messages 1.3.6.1.4.1.1166.1.621.16.5
OBJECT IDENTIFIER    

patMsgCount 1.3.6.1.4.1.1166.1.621.16.5.1
Gives PAT Message Count
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

caMsgCount 1.3.6.1.4.1.1166.1.621.16.5.2
Gives CA Message Count
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

pmtMsgCount 1.3.6.1.4.1.1166.1.621.16.5.3
Gives PMT message Count
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

niMsgCount 1.3.6.1.4.1.1166.1.621.16.5.4
Gives Network Information Message Count
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

networkTextMsgCount 1.3.6.1.4.1.1166.1.621.16.5.5
Gives Network text Message Count
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

virtualChannelMsgCount 1.3.6.1.4.1.1166.1.621.16.5.6
Gives Virtual channel message Count
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

subtitleMsgCount 1.3.6.1.4.1.1166.1.621.16.5.7
Gives Subtitle Message Count
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

coMsgCount 1.3.6.1.4.1.1166.1.621.16.5.8
Gives Channel Override Message Count
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

dwnldPreMsgCount 1.3.6.1.4.1.1166.1.621.16.5.9
Gives Download preamble message Count
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

dwnldMsgCount 1.3.6.1.4.1.1166.1.621.16.5.10
Gives Download Message Count
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

emmMsgCount 1.3.6.1.4.1.1166.1.621.16.5.11
Gives EMM Message Count
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

fingerPrintMessageCount 1.3.6.1.4.1.1166.1.621.16.5.12
Gives Finger Print message Count
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

hcmMsgCount 1.3.6.1.4.1.1166.1.621.16.5.13
Gives hardware control Message Count
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

uimMsgCount 1.3.6.1.4.1.1166.1.621.16.5.14
Gives Unit information message Count
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

evenBlkoutMsgCount 1.3.6.1.4.1.1166.1.621.16.5.15
Gives Event Blckout Message message Count
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

rf 1.3.6.1.4.1.1166.1.621.16.6
OBJECT IDENTIFIER    

frequencyOffset 1.3.6.1.4.1.1166.1.621.16.6.1
The acquired offset of the L-band frequency in MHz.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -100..100  

ber 1.3.6.1.4.1.1166.1.621.16.6.2
This displays Bit Errors.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

ebno 1.3.6.1.4.1.1166.1.621.16.6.3
This displays the Eb/No measured in the IRD.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -10..50  

rserror 1.3.6.1.4.1.1166.1.621.16.6.4
This displays the Reed Solomon Errors.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

lostlockcount 1.3.6.1.4.1.1166.1.621.16.6.5
This displays the number of times tuner lost lock.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

clearrserror 1.3.6.1.4.1.1166.1.621.16.6.6
Clears the rserror counter to zero.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

clearlostlockcount 1.3.6.1.4.1.1166.1.621.16.6.7
Clears the lostlockcount counter to zero.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

snr 1.3.6.1.4.1.1166.1.621.16.6.8
This displays the SNR value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535