DVB-CABLE-INA-IF-MIB

File: DVB-CABLE-INA-IF-MIB.mib (183390 bytes)

Imported modules

SNMPv2-SMI INET-ADDRESS-MIB SNMPv2-TC
SNMPv2-CONF IF-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Counter64 Gauge32 Integer32
Unsigned32 experimental TimeTicks
transmission InetAddress InetAddressType
RowStatus TruthValue TEXTUAL-CONVENTION
MacAddress OBJECT-GROUP MODULE-COMPLIANCE
ifIndex InterfaceIndexOrZero InterfaceIndex

Defined Types

MacFlagSet  
This data type represents a reference to a set of MAC Flags. This reference is used in different MAC messages. See also ES 200 800, section 5.3.1.3.
TEXTUAL-CONVENTION    
  INTEGER 1..16  

EtsTimeOut  
This data type represents possible timeout values. See also ES 200 800, section 5.5.3.2.
TEXTUAL-CONVENTION    
  INTEGER etsTODisabled(0), etsTO9ms(1), etsTO30ms(2), etsTO60ms(3), etsTO90ms(4), etsTO300ms(5), etsTO600ms(6), etsTO900ms(7), etsTO3000ms(8), etsTO6000ms(9), etsTO9000ms(10), etsTO30000ms(11), etsTO60000ms(12)  

UpFrequency  
Upstream frequency range
TEXTUAL-CONVENTION    
  Integer32 5000000..65000000  

DownFrequency  
Downstream frequency range
TEXTUAL-CONVENTION    
  Integer32 70000000..862000000  

Modulation  
Modulation type: OOB: qpsk(1) IB : qpsk(1), qam16(2), qam32(3), qam64(4), qam128(5), qam256(6)
TEXTUAL-CONVENTION    
  INTEGER qpsk(1), qam16(2), qam32(3), qam64(4), qam128(5), qam256(6)  

DownstreamSymbolrate  
The downstream transmission symbol rate used in symbol/s The symbol rate is given as an integer. Commonly used symbolrates are : symbol/s --------------------------------------- 6800000 IB 8Mhz 6875000 IB 8Mhz 6900000 IB 8Mhz 4896000 IB 6Mhz 5168000 IB 6Mhz 5304000 IB 6Mhz 772000 OOB optional, Grade A 1544000 OOB mandatory, Grade B
TEXTUAL-CONVENTION    
  INTEGER 0..4294967295  

UpstreamSymbolrate  
The upstream transmission symbol rate used. symbol/s --------------------------------- sr0128000 optional Grade A sr0772000 optional Grade B sr1544000 mandatory Grade C sr3088000 optional Grade D
TEXTUAL-CONVENTION    
  INTEGER sr0128000(1), sr0772000(2), sr1544000(3), sr3088000(4)  

DvbInaIfMacEntry  
SEQUENCE    
  dvbInaIfMacDeviceCapabilities OCTET STRING
  dvbInaIfMacDeviceExtendedCapabilities OCTET STRING
  dvbInaIfMacCapabilities OCTET STRING
  dvbInaIfMacExtendedCapabilities OCTET STRING
  dvbInaIfMacProtocolSupport INTEGER
  dvbInaIfMacTimeout0 EtsTimeOut
  dvbInaIfMacTimeout1 EtsTimeOut
  dvbInaIfMacTimeout2 EtsTimeOut
  dvbInaIfMacTimeout3 EtsTimeOut
  dvbInaIfMacTimeout4 EtsTimeOut
  dvbInaIfMacTimeoutD EtsTimeOut
  dvbInaIfMacTimeoutE EtsTimeOut
  dvbInaIfMacTimeoutF EtsTimeOut
  dvbInaIfMacRapidSignOnEnable TruthValue
  dvbInaIfMacRespCollTimeWindow Unsigned32
  dvbInaIfMacAddressFilterUse INTEGER
  dvbInaIfMacAddressPositionMask INTEGER
  dvbInaIfMacAddressComparisonValue INTEGER
  dvbInaIfMacGrantProtocolTimeOut Unsigned32
  dvbInaIfMacIdleInterval Unsigned32
  dvbInaIfMacIdleInvalidCount INTEGER
  dvbInaIfMacN INTEGER
  dvbInaIfMacMaxContentionMsgLen INTEGER
  dvbInaIfMacMaxReservationMsgLen INTEGER
  dvbInaIfMacNiuCount Gauge32
  dvbInaIfMacConnections Gauge32
  dvbInaIfMacUnknownNiuError Counter32
  dvbInaIfMacMsgDataError Counter32
  dvbInaIfMacMsgHdrError Counter32
  dvbInaIfMacInvalidNiu Counter32
  dvbInaIfMacTimingRangingError Counter32
  dvbInaIfMacPowerRangingError Counter32
  dvbInaIfMacOtherSignOnError Counter32

DvbInaIfProvChEntry  
SEQUENCE    
  dvbInaIfProvChIndex INTEGER
  dvbInaIfProvChRowAccessStatus RowStatus
  dvbInaIfProvChServiceChIfIndex InterfaceIndex
  dvbInaIfProvChBackupServiceChIfIndex InterfaceIndex
  dvbInaIfProvChIncrPowerRetryCount INTEGER
  dvbInaIfProvChMaxPowerLevel INTEGER
  dvbInaIfProvChMinPowerLevel INTEGER
  dvbInaIfProvChMaxBackOffExponent INTEGER
  dvbInaIfProvChMinBackOffExponent INTEGER
  dvbInaIfProvChAbsoluteTimeOffset INTEGER

DvbInaIfDsChEntry  
SEQUENCE    
  dvbInaIfDsChFrequency DownFrequency
  dvbInaIfDsChConnections Gauge32
  dvbInaIfDsChTxPower INTEGER
  dvbInaIfDsChDownCoaxId Unsigned32
  dvbInaIfDsChSymbolRate DownstreamSymbolrate
  dvbInaIfDsChModulation Modulation
  dvbInaIfDsChType INTEGER
  dvbInaIfDsChDefaultPID Unsigned32
  dvbInaIfDsChProvFrequency DownFrequency
  dvbInaIfDsChProvDownstreamType INTEGER
  dvbInaIfDsChProvEnable TruthValue
  dvbInaIfDsChProvTableIndex INTEGER

DvbInaIfUsChEntry  
SEQUENCE    
  dvbInaIfUsChFrequency UpFrequency
  dvbInaIfUsChSymbolRate UpstreamSymbolrate
  dvbInaIfUsChModulation Modulation
  dvbInaIfUsChMacFlagSet MacFlagSet
  dvbInaIfUsChId INTEGER
  dvbInaIfUsChConnections Gauge32
  dvbInaIfUsChCalibrationRxPower INTEGER
  dvbInaIfUsChUpCoaxId Unsigned32
  dvbInaIfUsChDownCoaxId Unsigned32
  dvbInaIfUsChAtmCells Counter64
  dvbInaIfUsChAtmTimingErrors Counter64
  dvbInaIfUsChAtmPowerErrors Counter64
  dvbInaIfUsChAtmRSCorrectableErrors Counter64
  dvbInaIfUsChAtmRSNonCorrectableErrors Counter64
  dvbInaIfUsChAtmHecErrors Counter64
  dvbInaIfUsChAal5CrcErrors Counter64
  dvbInaIfUsChAtmCollisionErrors Counter64

DvbInaIfNiuEntry  
SEQUENCE    
  dvbInaIfNiuMacAddress MacAddress
  dvbInaIfNiuRowAccessStatus RowStatus
  dvbInaIfNiuState INTEGER
  dvbInaIfNiuDesiredState INTEGER
  dvbInaIfNiuDownIfIndex InterfaceIndexOrZero
  dvbInaIfNiuUpIfIndex InterfaceIndexOrZero
  dvbInaIfNiuUpTxLevel INTEGER
  dvbInaIfNiuTimeOffset Integer32
  dvbInaIfNiuStatus Unsigned32
  dvbInaIfNiuErrorCode Unsigned32
  dvbInaIfNiuRetryCount INTEGER
  dvbInaIfNiuCapabilities OCTET STRING
  dvbInaIfNiuExtendedCapabilities OCTET STRING
  dvbInaIfNiuInitCompletionStatus INTEGER
  dvbInaIfNiuRequestStatus INTEGER
  dvbInaIfNiuResponseNumber Counter32
  dvbInaIfNiuRespTxLevel INTEGER
  dvbInaIfNiuRespTimeOffset Integer32
  dvbInaIfNiuRespOoBDownFrequency DownFrequency
  dvbInaIfNiuRespIBDownFrequency DownFrequency
  dvbInaIfNiuRespSNRLevel INTEGER
  dvbInaIfNiuRespRxLevel INTEGER
  dvbInaIfNiuDefaultConnectionId Unsigned32
  dvbInaIfNiuLifetime Unsigned32
  dvbInaIfNiuGrantProtocolTimeOut Unsigned32
  dvbInaIfNiuSlotConfigurationErr Counter32
  dvbInaIfNiuAtmPacketLoss Counter32
  dvbInaIfNiuSlEsCrcErr Counter32
  dvbInaIfNiuSlEsFrameCount Counter32
  dvbInaIfNiuSlotConfigurationCount Counter32
  dvbInaIfNiuRSErrCorrectable Counter32
  dvbInaIfNiuRSErrNonCorrectable Counter32
  dvbInaIfNiuSignOnTime TimeTicks
  dvbInaIfNiuDsChBytes Counter64
  dvbInaIfNiuUsChBytes Counter64
  dvbInaIfNiuTimeRanging Counter32
  dvbInaIfNiuPowerRanging Counter32

DvbInaIfConEntry  
SEQUENCE    
  dvbInaIfConNiuMacAddress MacAddress
  dvbInaIfConConnectionId Unsigned32
  dvbInaIfConCurrentState INTEGER
  dvbInaIfConDesiredState INTEGER
  dvbInaIfConConnectionType BITS
  dvbInaIfConAccessStatus RowStatus
  dvbInaIfConEncapsulation INTEGER
  dvbInaIfConAtmDownstreamVCC Unsigned32
  dvbInaIfConAtmUpstreamVCC Unsigned32
  dvbInaIfConFilterMACAddress MacAddress
  dvbInaIfConPID Unsigned32
  dvbInaIfConMaxContentionMsgLen INTEGER
  dvbInaIfConMaxReservationMsgLen INTEGER
  dvbInaIfConAuxFlags INTEGER

DvbInaIfConQosEntry  
SEQUENCE    
  dvbInaIfConQosPriority INTEGER
  dvbInaIfConQosDsReqMaxPacketSize Unsigned32
  dvbInaIfConQosDsReqBitrate Unsigned32
  dvbInaIfConQosDsReqJitter INTEGER
  dvbInaIfConQosDsAllocMaxPacketSize Unsigned32
  dvbInaIfConQosDsAllocBitrate Unsigned32
  dvbInaIfConQosDsAllocJitter INTEGER
  dvbInaIfConQosUsReqBw Unsigned32
  dvbInaIfConQosUsReqMaxDistSlots Unsigned32
  dvbInaIfConQosUsReqFrameLength Unsigned32
  dvbInaIfConQosUsAllocBw Unsigned32
  dvbInaIfConQosUsAllocMaxDistSlots Unsigned32
  dvbInaIfConQosUsAllocFrameLength Unsigned32
  dvbInaIfConQosUsReqFixedRateMethod INTEGER
  dvbInaIfConQosUsAllocFixedRateMethod INTEGER

DvbInaIfConSesEntry  
SEQUENCE    
  dvbInaIfConSesUsControl Unsigned32
  dvbInaIfConSesUsNiuClientSrcIpType InetAddressType
  dvbInaIfConSesUsNiuClientSrcIp InetAddress
  dvbInaIfConSesUsNiuClientDstIpType InetAddressType
  dvbInaIfConSesUsNiuClientDstIp InetAddress
  dvbInaIfConSesUsNiuClientSrcPort Unsigned32
  dvbInaIfConSesUsNiuClientDstPort Unsigned32
  dvbInaIfConSesUsTransportProtocol INTEGER
  dvbInaIfConSesUsNiuClientSrcMac MacAddress
  dvbInaIfConSesUsNiuClientDstMac MacAddress
  dvbInaIfConSesUsEthernetProtocol Unsigned32
  dvbInaIfConSesUsSessionId Unsigned32
  dvbInaIfConSesDsControl Unsigned32
  dvbInaIfConSesDsInaClientSrcIpType InetAddressType
  dvbInaIfConSesDsInaClientSrcIp InetAddress
  dvbInaIfConSesDsInaClientDstIpType InetAddressType
  dvbInaIfConSesDsInaClientDstIp InetAddress
  dvbInaIfConSesDsInaClientSrcPort Unsigned32
  dvbInaIfConSesDsInaClientDstPort Unsigned32
  dvbInaIfConSesDsTransportProtocol INTEGER
  dvbInaIfConSesDsInaClientSrcMac MacAddress
  dvbInaIfConSesDsInaClientDstMac MacAddress
  dvbInaIfConSesDsEthernetProtocol Unsigned32
  dvbInaIfConSesDsSessionId Unsigned32

DvbInaIfConHdrSupEntry  
SEQUENCE    
  dvbInaIfConHdrSupContextId INTEGER
  dvbInaIfConHdrSupDirection INTEGER
  dvbInaIfConHdrSupControl OCTET STRING
  dvbInaIfConHdrSupGeneration Integer32
  dvbInaIfConHdrSupHeaderLength Integer32
  dvbInaIfConHdrSupHeader OCTET STRING

DvbInaIfReprovSrcNiuEntry  
SEQUENCE    
  dvbInaIfReprovSrcNiuRowAccessStatus RowStatus
  dvbInaIfReprovSrcNiuCommand INTEGER
  dvbInaIfReprovSrcNiuDsChFrequency DownFrequency
  dvbInaIfReprovSrcNiuDsChSymbolRate DownstreamSymbolrate
  dvbInaIfReprovSrcNiuDsChModulation Modulation
  dvbInaIfReprovSrcNiuDsChType INTEGER
  dvbInaIfReprovSrcNiuUsChFrequency UpFrequency
  dvbInaIfReprovSrcNiuUsChSymbolRate UpstreamSymbolrate
  dvbInaIfReprovSrcNiuUsChModulation Modulation
  dvbInaIfReprovSrcNiuUsChId Integer32

DvbInaIfReprovDstNiuEntry  
SEQUENCE    
  dvbInaIfReprovDstNiuMacAddress MacAddress
  dvbInaIfReprovDstNiuRowAccessStatus RowStatus
  dvbInaIfReprovDstNiuCommand INTEGER
  dvbInaIfReprovDstNiuDownIfIndex InterfaceIndexOrZero
  dvbInaIfReprovDstNiuUpIfIndex InterfaceIndexOrZero
  dvbInaIfReprovDstNiuLifetime Unsigned32

DvbInaIfReprovSrcConEntry  
SEQUENCE    
  dvbInaIfReprovSrcConRowAccessStatus RowStatus
  dvbInaIfReprovSrcConConnectionIdNew Unsigned32
  dvbInaIfReprovSrcConPID Unsigned32
  dvbInaIfReprovSrcConDsVc Unsigned32
  dvbInaIfReprovSrcConUsVc Unsigned32

DvbInaIfReprovDstConEntry  
SEQUENCE    
  dvbInaIfReprovDstConConnectionIdOld Unsigned32
  dvbInaIfReprovDstConRowAccessStatus RowStatus
  dvbInaIfReprovDstConConnectionIdNew Unsigned32
  dvbInaIfReprovDstConConnectionType BITS
  dvbInaIfReprovDstConEncapsulation INTEGER
  dvbInaIfReprovDstConAtmDownstreamVCC Unsigned32
  dvbInaIfReprovDstConAtmUpstreamVCC Unsigned32
  dvbInaIfReprovDstConFilterMACAddress MacAddress
  dvbInaIfReprovDstConPID Unsigned32
  dvbInaIfReprovDstConMaxContentionMsgLen INTEGER
  dvbInaIfReprovDstConMaxReservationMsgLen INTEGER
  dvbInaIfReprovDstConAuxFlags INTEGER

DvbInaIfReprovDstConSesEntry  
SEQUENCE    
  dvbInaIfReprovDstConSesUsControl Unsigned32
  dvbInaIfReprovDstConSesUsNiuClientSrcIpType InetAddressType
  dvbInaIfReprovDstConSesUsNiuClientSrcIp InetAddress
  dvbInaIfReprovDstConSesUsNiuClientDstIpType InetAddressType
  dvbInaIfReprovDstConSesUsNiuClientDstIp InetAddress
  dvbInaIfReprovDstConSesUsNiuClientSrcPort Unsigned32
  dvbInaIfReprovDstConSesUsNiuClientDstPort Unsigned32
  dvbInaIfReprovDstConSesUsTransportProtocol INTEGER
  dvbInaIfReprovDstConSesUsNiuClientSrcMac MacAddress
  dvbInaIfReprovDstConSesUsNiuClientDstMac MacAddress
  dvbInaIfReprovDstConSesUsEthernetProtocol Unsigned32
  dvbInaIfReprovDstConSesUsSessionId Unsigned32
  dvbInaIfReprovDstConSesDsControl Unsigned32
  dvbInaIfReprovDstConSesDsInaClientSrcIpType InetAddressType
  dvbInaIfReprovDstConSesDsInaClientSrcIp InetAddress
  dvbInaIfReprovDstConSesDsInaClientDstIpType InetAddressType
  dvbInaIfReprovDstConSesDsInaClientDstIp InetAddress
  dvbInaIfReprovDstConSesDsInaClientSrcPort Unsigned32
  dvbInaIfReprovDstConSesDsInaClientDstPort Unsigned32
  dvbInaIfReprovDstConSesDsTransportProtocol INTEGER
  dvbInaIfReprovDstConSesDsInaClientSrcMac MacAddress
  dvbInaIfReprovDstConSesDsInaClientDstMac MacAddress
  dvbInaIfReprovDstConSesDsEthernetProtocol Unsigned32
  dvbInaIfReprovDstConSesDsSessionId Unsigned32

DvbInaIfReprovDstConHdrSupEntry  
SEQUENCE    
  dvbInaIfReprovDstConHdrSupContextId INTEGER
  dvbInaIfReprovDstConHdrSupDirection INTEGER
  dvbInaIfReprovDstConHdrSupRowAccessStatus RowStatus
  dvbInaIfReprovDstConHdrSupControl OCTET STRING
  dvbInaIfReprovDstConHdrSupGeneration Integer32
  dvbInaIfReprovDstConHdrSupHeaderLength Integer32
  dvbInaIfReprovDstConHdrSupHeader OCTET STRING

DvbInaIfReprovDstConQosEntry  
SEQUENCE    
  dvbInaIfReprovDstConQosPriority INTEGER
  dvbInaIfReprovDstConQosDsReqMaxPacketSize Unsigned32
  dvbInaIfReprovDstConQosDsReqBitrate Unsigned32
  dvbInaIfReprovDstConQosDsReqJitter INTEGER
  dvbInaIfReprovDstConQosUsReqBw Unsigned32
  dvbInaIfReprovDstConQosUsReqMaxDistSlots Unsigned32
  dvbInaIfReprovDstConQosUsReqFrameLength Unsigned32
  dvbInaIfReprovDstConQosUsReqFixedRateMethod INTEGER

Defined Values

dvbInaIf 1.3.6.1.2.1.10.146
The MIB modules for INAs that conform to the EuroModem specification. This MIB assumes the INA implements MIB-II RFC 1213 The original MIB definition work was carried out for the DVB-RC group by Bert Van Willigen Philips Research Laboratory Eindhoven, The Netherlands.
MODULE-IDENTITY    

dvbInaIfMIBObjects 1.3.6.1.2.1.10.146.1
OBJECT IDENTIFIER    

dvbInaIfMIBConform 1.3.6.1.2.1.10.146.2
OBJECT IDENTIFIER    

dvbInaIfMac 1.3.6.1.2.1.10.146.1.1
OBJECT IDENTIFIER    

dvbInaIfProvision 1.3.6.1.2.1.10.146.1.2
OBJECT IDENTIFIER    

dvbInaIfDsCh 1.3.6.1.2.1.10.146.1.3
OBJECT IDENTIFIER    

dvbInaIfUsCh 1.3.6.1.2.1.10.146.1.4
OBJECT IDENTIFIER    

dvbInaIfNiu 1.3.6.1.2.1.10.146.1.5
OBJECT IDENTIFIER    

dvbInaIfConnection 1.3.6.1.2.1.10.146.1.6
OBJECT IDENTIFIER    

dvbInaIfReprov 1.3.6.1.2.1.10.146.1.7
OBJECT IDENTIFIER    

dvbInaIfCompliances 1.3.6.1.2.1.10.146.2.1
OBJECT IDENTIFIER    

dvbInaIfGroups 1.3.6.1.2.1.10.146.2.2
OBJECT IDENTIFIER    

dvbInaIfMacTable 1.3.6.1.2.1.10.146.1.1.1
Describes the attributes of each MAC interface, extending the information available from ifEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfMacEntry

dvbInaIfMacEntry 1.3.6.1.2.1.10.146.1.1.1.1
An entry containing objects describing attributes of each MAC entry, extending the information in ifEntry. An entry in this table exists for each ifEntry with an ifType of dvbRecMacLayer(146). The state of the MAC depends on the state of the INA. If the INA is not operational also the MAC is not operational.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfMacEntry  

dvbInaIfMacDeviceCapabilities 1.3.6.1.2.1.10.146.1.1.1.1.1
This 32-bit object specifies the maximum capabilities of this MAC entity. This is the possible set of capability for this INA.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

dvbInaIfMacDeviceExtendedCapabilities 1.3.6.1.2.1.10.146.1.1.1.1.2
This 32-bit object specifies the maximum extended capabilities of this MAC entity. This is the possible set of capability for this INA.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

dvbInaIfMacCapabilities 1.3.6.1.2.1.10.146.1.1.1.1.3
This 32-bit object specifies the capabilities of this MAC entity. It is equal to or a subset of dvbInaIfMacDeviceCapabilities. Default this parameter is equal to dvbInaIfMacDeviceCapabilities. The object can be used to restrict the capabilities for this MAC entity.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

dvbInaIfMacExtendedCapabilities 1.3.6.1.2.1.10.146.1.1.1.1.4
This 32-bit object specifies the extended capabilities of this MAC entity. It is equal to or a subset of dvbInaIfMacDeviceExtendedCapabilities. Default this parameter is equal to dvbInaIfMacDeviceExtendedCapabilities. The object can be used to restrict the extended capabilities for this MAC entity.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

dvbInaIfMacProtocolSupport 1.3.6.1.2.1.10.146.1.1.1.1.5
Specifies the MAC standard version supported by this MAC entity. Optional, this parameter can be written to force a particular MAC version to be executed by the INA.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER davic10(0), davic11(1), davic12(2), en301199(20), ets300800v20davic15(29), ets300800v10(30)  

dvbInaIfMacTimeout0 1.3.6.1.2.1.10.146.1.1.1.1.6
Time-out value 0x0.
Status: current Access: read-write
OBJECT-TYPE    
  EtsTimeOut  

dvbInaIfMacTimeout1 1.3.6.1.2.1.10.146.1.1.1.1.7
Time-out value 0x1.
Status: current Access: read-write
OBJECT-TYPE    
  EtsTimeOut  

dvbInaIfMacTimeout2 1.3.6.1.2.1.10.146.1.1.1.1.8
Time-out value 0x2.
Status: current Access: read-write
OBJECT-TYPE    
  EtsTimeOut  

dvbInaIfMacTimeout3 1.3.6.1.2.1.10.146.1.1.1.1.9
Time-out value 0x3.
Status: current Access: read-write
OBJECT-TYPE    
  EtsTimeOut  

dvbInaIfMacTimeout4 1.3.6.1.2.1.10.146.1.1.1.1.10
Time-out value 0x4.
Status: current Access: read-write
OBJECT-TYPE    
  EtsTimeOut  

dvbInaIfMacTimeoutD 1.3.6.1.2.1.10.146.1.1.1.1.11
Time-out value 0xD. Terminal Time-Out, Security Sign-On.
Status: current Access: read-write
OBJECT-TYPE    
  EtsTimeOut  

dvbInaIfMacTimeoutE 1.3.6.1.2.1.10.146.1.1.1.1.12
Time-out value 0xE. Terminal Time-Out, Main Key Exchange.
Status: current Access: read-write
OBJECT-TYPE    
  EtsTimeOut  

dvbInaIfMacTimeoutF 1.3.6.1.2.1.10.146.1.1.1.1.13
Time-out value 0xF. Terminal Time-Out, Quick/Explicit Key exchange.
Status: current Access: read-write
OBJECT-TYPE    
  EtsTimeOut  

dvbInaIfMacRapidSignOnEnable 1.3.6.1.2.1.10.146.1.1.1.1.14
This Boolean parameter specifies whether the NIU's are allowed to do a rapid sign-on when they enter the sign-on process. (See the Need_Calibration bit in the Sign-On_Request_Message.). By default this object is False.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dvbInaIfMacRespCollTimeWindow 1.3.6.1.2.1.10.146.1.1.1.1.15
Specifies the maximum time for the sign-on response message transmission randomisation.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfMacAddressFilterUse 1.3.6.1.2.1.10.146.1.1.1.1.16
This setting controls the use of the of the Address filter in the Sign-On Request Message. Disabled : The address filter is not used. Managed : The manager can control the use of the address filter with dvbInaIfMacAddressPositionMask and dvbInaIfMacAddressComparisonValue Automatic : The INA controls use of the address filter itself. The readback values of dvbInaIfMacAddressPositionMask and dvbInaIfMacAddressComparisonValue will not necessary reflect the values used by the INA.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), managed(2), automatic(3)  

dvbInaIfMacAddressPositionMask 1.3.6.1.2.1.10.146.1.1.1.1.17
Indicates the bit positions in the NIU MAC address that are used for address filtering comparison.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfMacAddressComparisonValue 1.3.6.1.2.1.10.146.1.1.1.1.18
Specifies the value that the NIU should use for MAC address comparison.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfMacGrantProtocolTimeOut 1.3.6.1.2.1.10.146.1.1.1.1.19
Default value for the time that the NIU should wait before verifying the status of pending grants. See also dvbInaIfNiuGrantProtocolTimeOut.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfMacIdleInterval 1.3.6.1.2.1.10.146.1.1.1.1.20
Specifies the transmission interval in seconds to be used for the MAC Idle message. When this value is zero, no idle messages shall be sent.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 60..600  

dvbInaIfMacIdleInvalidCount 1.3.6.1.2.1.10.146.1.1.1.1.21
Specifies a MAC Idle message invalid period in number of dvbInaIfMacIdleInterval, after which the NIU is declared to be signed-off. For example, if dvbInaIfMacIdleInterval is 5 seconds and this parameter is 3, then if in 15 seconds no data and/or MAC Idle messages are received, the INA will assume that the NIU in question has signed-off. This object is only valid when dvbInaIfMacIdleInterval is non-zero.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfMacN 1.3.6.1.2.1.10.146.1.1.1.1.22
Maximum value of the upstream slot position register.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1023  

dvbInaIfMacMaxContentionMsgLen 1.3.6.1.2.1.10.146.1.1.1.1.23
The default value for the Maximum_Contention_Access_Message_Length in the Connect Message. This is the maximum length of a message that may be transmitted using contention access. Any message greater than this should use reservation access. See also dvbInaIfConMaxContentionMsgLen.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

dvbInaIfMacMaxReservationMsgLen 1.3.6.1.2.1.10.146.1.1.1.1.24
The default value for the Maximum_Reservation_Access_Message_Length in the Connect Message. This is the maximum length of a message that may be transmitted using a single reservation access. Any message greater than this should be transmitted by making multiple reservation requests. See also dvbInaIfConMaxReservationMsgLen.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

dvbInaIfMacNiuCount 1.3.6.1.2.1.10.146.1.1.1.1.25
Number of connected NIUs.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dvbInaIfMacConnections 1.3.6.1.2.1.10.146.1.1.1.1.26
The number of connections currently active for this MAC entity.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dvbInaIfMacUnknownNiuError 1.3.6.1.2.1.10.146.1.1.1.1.27
This value is incremented if a message is received from a unknown NIU, except if it is a SignOn_Response Message.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfMacMsgDataError 1.3.6.1.2.1.10.146.1.1.1.1.28
This value is incremented if a MAC message is received with a data error, i.e. 1) is too short, 2) has an illegal Connection ID or Reservation ID, 3) is a reservation message from a NIU not reservation capable, 4) is a security message from a NIU not security capable 5) is an illegal MAC message.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfMacMsgHdrError 1.3.6.1.2.1.10.146.1.1.1.1.29
This value is incremented if a MAC message is received with a header error, i.e. 1) is too short, 2) does not contain a MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfMacInvalidNiu 1.3.6.1.2.1.10.146.1.1.1.1.30
This value is incremented if a MAC Initialisation Complete Message is transmitted with the Invalid_STB/NIU bit set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfMacTimingRangingError 1.3.6.1.2.1.10.146.1.1.1.1.31
This value is incremented if a MAC Initialisation Complete Message is transmitted with the Timing_Ranging_Error bit set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfMacPowerRangingError 1.3.6.1.2.1.10.146.1.1.1.1.32
This value is incremented if a MAC Initialisation Complete Message is transmitted with the Power_Ranging_Error bit set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfMacOtherSignOnError 1.3.6.1.2.1.10.146.1.1.1.1.33
This value is incremented if a MAC Initialisation Complete Message is transmitted with the Other_Error bit set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfProvChTable 1.3.6.1.2.1.10.146.1.2.1
This table specifies the information for the Default Configuration Message transmitted on the Provisioning channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfProvChEntry

dvbInaIfProvChEntry 1.3.6.1.2.1.10.146.1.2.1.1
An entry containing objects describing information for the Default Configuration Message transmitted on the Provisioning channel. More than one downstream can use than same entry or different entries can be made for different downstreams. If provisioning is done on an other INA, this table will be empty.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfProvChEntry  

dvbInaIfProvChIndex 1.3.6.1.2.1.10.146.1.2.1.1.1
Index of this table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfProvChRowAccessStatus 1.3.6.1.2.1.10.146.1.2.1.1.2
Controls and reflects the status of this row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dvbInaIfProvChServiceChIfIndex 1.3.6.1.2.1.10.146.1.2.1.1.3
The ifIndex of the upstream channel used as Service Channel for the provisioning.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

dvbInaIfProvChBackupServiceChIfIndex 1.3.6.1.2.1.10.146.1.2.1.1.4
The ifIndex of the upstream channel used as Backup Service Channel for the provisioning.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

dvbInaIfProvChIncrPowerRetryCount 1.3.6.1.2.1.10.146.1.2.1.1.5
Specifies the number of attempts the NIU should do to enter the system at the same power level before incrementing its upstream transmit power for this MAC entity.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfProvChMaxPowerLevel 1.3.6.1.2.1.10.146.1.2.1.1.6
Specifies the maximum power in dBuV the NIU is allowed to transmit upstream for this MAC entity.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfProvChMinPowerLevel 1.3.6.1.2.1.10.146.1.2.1.1.7
Specifies the minimum power in dBuV the NIU has to transmit upstream for this MAC entity.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfProvChMaxBackOffExponent 1.3.6.1.2.1.10.146.1.2.1.1.8
Specifies the maximum back off exponent counter for this MAC entity.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfProvChMinBackOffExponent 1.3.6.1.2.1.10.146.1.2.1.1.9
Specifies the minimum back off exponent counter for this MAC entity.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfProvChAbsoluteTimeOffset 1.3.6.1.2.1.10.146.1.2.1.1.10
Specifies the default absolute time offset in 100 ns units to be used for first sign-on of a NIU for this MAC entity.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -32768..32767  

dvbInaIfDsChTable 1.3.6.1.2.1.10.146.1.3.1
This table describes the attributes of downstream channels (frequency bands).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfDsChEntry

dvbInaIfDsChEntry 1.3.6.1.2.1.10.146.1.3.1.1
List of attributes for a single Downstream channel. An entry in this table exists for each downstream ifEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfDsChEntry  

dvbInaIfDsChFrequency 1.3.6.1.2.1.10.146.1.3.1.1.1
The centre of the downstream frequency associated with this channel.
Status: current Access: read-write
OBJECT-TYPE    
  DownFrequency  

dvbInaIfDsChConnections 1.3.6.1.2.1.10.146.1.3.1.1.2
Specifies the number of connections currently active for this down stream channel.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dvbInaIfDsChTxPower 1.3.6.1.2.1.10.146.1.3.1.1.3
Specifies the down stream transmission power in dBuV of this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfDsChDownCoaxId 1.3.6.1.2.1.10.146.1.3.1.1.4
Specifies the coax ID of the Downstream HFC segment to which the downstream channel is connected. By default this parameter is zero.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfDsChSymbolRate 1.3.6.1.2.1.10.146.1.3.1.1.5
Specifies the symbol rate for the Downstream channel.
Status: current Access: read-write
OBJECT-TYPE    
  DownstreamSymbolrate  

dvbInaIfDsChModulation 1.3.6.1.2.1.10.146.1.3.1.1.6
Specifies the modulation for the Downstream channel.
Status: current Access: read-write
OBJECT-TYPE    
  Modulation  

dvbInaIfDsChType 1.3.6.1.2.1.10.146.1.3.1.1.7
Specifies if the Downstream channel is inband or out-of-band.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ib(1), oob(2)  

dvbInaIfDsChDefaultPID 1.3.6.1.2.1.10.146.1.3.1.1.8
The default value of the MPEG PID of the elementary stream that carries the data on this downstream. See also dvbInaIfConPID.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..8191  

dvbInaIfDsChProvFrequency 1.3.6.1.2.1.10.146.1.3.1.1.9
Specifies the Downstream frequency of the provisioning channel. This setting is always used, no matter the provisioning channel is on this INA or on another. If the provisioning channel is on this INA, the value will be the frequency of one of the downstreams.
Status: current Access: read-write
OBJECT-TYPE    
  DownFrequency  

dvbInaIfDsChProvDownstreamType 1.3.6.1.2.1.10.146.1.3.1.1.10
Specifies the type of the downstream provisioning channel in the Provisioning Channel Message. 0 = QAM_MPEG, 1 = QPSK_1,544, 2 = QPSK_3,088 3..255 Reserved This setting is always used, no matter the provisioning channel is on this INA or on another. If the provisioning channel is on this INA, the value can be derived from the ib/oob type and modulation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfDsChProvEnable 1.3.6.1.2.1.10.146.1.3.1.1.11
Specifies if this downstream channel is a Provisioning channel and as such transmits the Default Configuration Message. true = Provisioning channel false = not a Provisioning channel.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dvbInaIfDsChProvTableIndex 1.3.6.1.2.1.10.146.1.3.1.1.12
If this downstream channel is a provisioning channel, then an index to the Provisioning tabel must be give here.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfUsChTable 1.3.6.1.2.1.10.146.1.4.1
Describes the attributes of attached upstream channels (frequency bands).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfUsChEntry

dvbInaIfUsChEntry 1.3.6.1.2.1.10.146.1.4.1.1
List of attributes for a single upstream channel. The state of the upstream channel depends on the state of the MAC and downstream channel. If one of both or both are non-operational also the state upstream channel(s) shall be ready. That in the case of Space division Multiplex SDM each upstream channel has a different non-zero Coax ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfUsChEntry  

dvbInaIfUsChFrequency 1.3.6.1.2.1.10.146.1.4.1.1.1
Specifies the frequency in Hz of the carrier used for this upstream channel.
Status: current Access: read-write
OBJECT-TYPE    
  UpFrequency  

dvbInaIfUsChSymbolRate 1.3.6.1.2.1.10.146.1.4.1.1.2
Specifies the symbol rate for this upstream channel.
Status: current Access: read-write
OBJECT-TYPE    
  UpstreamSymbolrate  

dvbInaIfUsChModulation 1.3.6.1.2.1.10.146.1.4.1.1.3
Specifies the modulation for this upstream channel.
Status: current Access: read-write
OBJECT-TYPE    
  Modulation  

dvbInaIfUsChMacFlagSet 1.3.6.1.2.1.10.146.1.4.1.1.4
Specifies the MAC flag set assigned to this upstream channel.
Status: current Access: read-only
OBJECT-TYPE    
  MacFlagSet  

dvbInaIfUsChId 1.3.6.1.2.1.10.146.1.4.1.1.5
Specifies the logical channel number associated with this upstream channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfUsChConnections 1.3.6.1.2.1.10.146.1.4.1.1.6
Specifies the number of connections currently active for this upstream channel.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dvbInaIfUsChCalibrationRxPower 1.3.6.1.2.1.10.146.1.4.1.1.9
Specifies the target receive signal power in dBuV to which the NIUs on this upstream channel are calibrated
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfUsChUpCoaxId 1.3.6.1.2.1.10.146.1.4.1.1.10
Specifies the coax ID of the UpStream HFC segment to which the upstream channel is connected. By default this parameter is zero.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfUsChDownCoaxId 1.3.6.1.2.1.10.146.1.4.1.1.11
Specifies the coax ID of the Downstream HFC segment to which the upstream channel is connected. By default this parameter is zero.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfUsChAtmCells 1.3.6.1.2.1.10.146.1.4.1.1.12
Total number of recieved ATM Cells. 0 can indicate the counter is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

dvbInaIfUsChAtmTimingErrors 1.3.6.1.2.1.10.146.1.4.1.1.13
Number of ATM Cells received with Timing Error. 0 can indicate the counter is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

dvbInaIfUsChAtmPowerErrors 1.3.6.1.2.1.10.146.1.4.1.1.14
Number of ATM Cells received with Signal Level Error. 0 can indicate the counter is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

dvbInaIfUsChAtmRSCorrectableErrors 1.3.6.1.2.1.10.146.1.4.1.1.15
Number of ATM Cells received with correctable Reed-Solomon Errors. 0 can indicate the counter is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

dvbInaIfUsChAtmRSNonCorrectableErrors 1.3.6.1.2.1.10.146.1.4.1.1.16
Number of ATM Cells received with non-correctable Reed-Solomon Errors. 0 can indicate the counter is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

dvbInaIfUsChAtmHecErrors 1.3.6.1.2.1.10.146.1.4.1.1.17
Number of ATM Cells received with HEC Error. 0 can indicate the counter is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

dvbInaIfUsChAal5CrcErrors 1.3.6.1.2.1.10.146.1.4.1.1.18
Number AAL5 frames received with CRC error. 0 can indicate the counter is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

dvbInaIfUsChAtmCollisionErrors 1.3.6.1.2.1.10.146.1.4.1.1.19
Number of ATM Cells received with Collision detected. 0 can indicate the counter is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

dvbInaIfNiuTable 1.3.6.1.2.1.10.146.1.5.1
Describes the attributes of Network Interface Units.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfNiuEntry

dvbInaIfNiuEntry 1.3.6.1.2.1.10.146.1.5.1.1
Initially the table shall be empty. A new entry for a NIU is automatically created when the NIU in question signs on. Furthermore, the manager through the dvbInaIfNiuRowAccessStatus object can create new entries. This can be used in the case of re-provisioning where by the manager first makes an entry and sets all relevant parameters before the NIU is re-provisioned to this INA. When an entry is created for a NIU, also automatically an entry is created in the connection table for the default connection of the NIU in question. When a NIU entry is deleted, also all associated connection entries are deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfNiuEntry  

dvbInaIfNiuMacAddress 1.3.6.1.2.1.10.146.1.5.1.1.1
A 48-bit value representing the unique MAC address of the NIU.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

dvbInaIfNiuRowAccessStatus 1.3.6.1.2.1.10.146.1.5.1.1.2
Controls and reflects the status of this row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dvbInaIfNiuState 1.3.6.1.2.1.10.146.1.5.1.1.3
Returned status information is the NIU status as assumed by the INA. The following states are possible: null(1) Any state other than below. ranging(2): The NIU has responded to a [MAC] Sign-on Request Message but the time ranging and power calibration is not yet complete. rangingAborted(3), The INA has sent a Initalisation Complete Message to the NIU with Completion_Status_Field != 0 rangingComplete(4), The INA has sent a Initalisation Complete Message to the NIU with Completion_Status_Field = 0 connecting(5), The INA has sent a Connect Message for first connection and is waiting for a Connect Response Message from the NIU. connectComplete(6) The INA has sent a Connect Confirm Message for first connection to the NIU. stopped(7) The NUI is in the stopped transmission state after the INA has send a Stop_Upstream_Transmission to the NIU and the NIU has returned a Link Management Response. NOTE: The INA only needs to report states it is able to detect.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER null(1), ranging(2), rangingAborted(3), rangingComplete(4), connecting(5), connectComplete(6), stopped(7)  

dvbInaIfNiuDesiredState 1.3.6.1.2.1.10.146.1.5.1.1.4
Specifies the desired state of the NIU. This parameter can be set to one of the following values: down : Initial state. Disable NIU operation. start : Enable NIU operation. stop : Stop upstream transmission from the NIU.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER down(1), start(2), stop(3)  

dvbInaIfNiuDownIfIndex 1.3.6.1.2.1.10.146.1.5.1.1.5
Specifies the IfIndex of the downstream channel on which the NIU is tuned.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

dvbInaIfNiuUpIfIndex 1.3.6.1.2.1.10.146.1.5.1.1.6
Specifies the IfIndex of the upstream channel that is used by the NIU.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

dvbInaIfNiuUpTxLevel 1.3.6.1.2.1.10.146.1.5.1.1.7
Specifies the upstream transmit level. This is the INA notion of NIU transmit level. (See also 'dvbInaIfNiuRespTxLevel'.)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfNiuTimeOffset 1.3.6.1.2.1.10.146.1.5.1.1.8
Specifies the time offset. This is the INA notion of NIU time offset. (See also 'dvbInaIfNiuRespTimeOffset'.)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -32768..32767  

dvbInaIfNiuStatus 1.3.6.1.2.1.10.146.1.5.1.1.9
This 32-bit object specifies the status of this NIU. See Sign-On Response Message and Status Response Message [1] for the exact bit assignment. This object is updated after the reception of a Status Response Message [1].
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfNiuErrorCode 1.3.6.1.2.1.10.146.1.5.1.1.10
This 16-bit object specifies the error code in the Sign-On Response Message. See ES 200 800 for the exact bit assignment.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfNiuRetryCount 1.3.6.1.2.1.10.146.1.5.1.1.11
This 8-bit object specifies the number of transmissions of the Sign-On Response Message. (See [1]).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfNiuCapabilities 1.3.6.1.2.1.10.146.1.5.1.1.12
This 32-bit object specifies the capabilities of this NIU. See also ES 200 800 for the bit assignment.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

dvbInaIfNiuExtendedCapabilities 1.3.6.1.2.1.10.146.1.5.1.1.13
This 32-bit object specifies the extended capabilities of this NIU. See also ES 200 800 and ECR 5 for the bit assignment.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

dvbInaIfNiuInitCompletionStatus 1.3.6.1.2.1.10.146.1.5.1.1.14
This 8-bit object indicates the errors in the initialisation phase of this NIU. See the Initialization Complete Message ES 200 800 for the exact bit assignment.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfNiuRequestStatus 1.3.6.1.2.1.10.146.1.5.1.1.15
This object triggers the transmission of a Status Request Message [1]. This parameter can be set to one of the following parameters: 'NiuReqAddressPars(0)': request address parameters, 'NiuReqErrorPars(1)': request error parameters, 'NiuReqConnectionsPars(2)': request connection parameters, and 'NiuReqPhyLayerPars(3)': request physical layer parameters. When read this object returns 'NiuReqAddressPars(0)'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER niuReqAddressPars(0), niuReqErrorPars(1), niuReqConnectionsPars(2), niuReqPhyLayerPars(3)  

dvbInaIfNiuResponseNumber 1.3.6.1.2.1.10.146.1.5.1.1.16
This object is incremented when a Status Response Message [1] is received. This object can be polled to detect the reception of this message. After reset this object is zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfNiuRespTxLevel 1.3.6.1.2.1.10.146.1.5.1.1.17
Specifies the transmit power level of the NIU. This object is updated after the reception of a Status Response Message [1] that is a response on the 'NiuReqPhyLayerPars(3)' request.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfNiuRespTimeOffset 1.3.6.1.2.1.10.146.1.5.1.1.18
Specifies the time offset of the NIU. This object is updated after the reception of a Status Response Message [1] that is a response on the 'NiuReqPhyLayerPars(3)' request.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -32768..32767  

dvbInaIfNiuRespOoBDownFrequency 1.3.6.1.2.1.10.146.1.5.1.1.19
Specifies the OoB downstream frequency of the NIU. This object is updated after the reception of a Status Response Message [1] that is a response on the 'NiuReqPhyLayerPars(3)' request.
Status: current Access: read-only
OBJECT-TYPE    
  DownFrequency  

dvbInaIfNiuRespIBDownFrequency 1.3.6.1.2.1.10.146.1.5.1.1.20
Specifies the IB downstream frequency of the NIU. This object is updated after the reception of a Status Response Message [1] that is a response on the 'NiuReqPhyLayerPars(3)' request.
Status: current Access: read-only
OBJECT-TYPE    
  DownFrequency  

dvbInaIfNiuRespSNRLevel 1.3.6.1.2.1.10.146.1.5.1.1.21
Specifies the estimated SNR level at the RF input of the NIU. This object is updated after the reception of a Status Response Message [1] that is a response on the 'NiuReqPhyLayerPars(3)' request.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfNiuRespRxLevel 1.3.6.1.2.1.10.146.1.5.1.1.22
Specifies the estimated downstream power level of the MAC messages at the RF input of the NIU. This object is updated after the reception of a Status Response Message [1] that is a response on the 'NiuReqPhyLayerPars(3)' request.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfNiuDefaultConnectionId 1.3.6.1.2.1.10.146.1.5.1.1.23
Specifies the ConnectionId of the default connection that is assigned to this NIU.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfNiuLifetime 1.3.6.1.2.1.10.146.1.5.1.1.24
Defines how long after the NIU was signed off, the entry is removed from the table. An infinite(0) value would mean that the values are stored at least until the next reboot of the INA.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfNiuGrantProtocolTimeOut 1.3.6.1.2.1.10.146.1.5.1.1.25
The time that the NIU should wait before verifying the status of pending grants. Default value is dvbInaIfMacGrantProtocolTimeOut.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfNiuSlotConfigurationErr 1.3.6.1.2.1.10.146.1.5.1.1.26
NIU Error Parameter: Slot_Configuration_CRC_Error_Count, the number of errors in Slot_Configuration_Count R bytes, as found by the CRC decoder.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfNiuAtmPacketLoss 1.3.6.1.2.1.10.146.1.5.1.1.27
NIU Error Parameter: ATM_Packet_Loss_Count, the number of received ATM cells that were lost, either due to unrecoverable Reed-Solomon errors or because of an erroneous HEC of the ATM cell header.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfNiuSlEsCrcErr 1.3.6.1.2.1.10.146.1.5.1.1.28
Niu Error Parameter: SL-ESF_CRC_Error_Count, the number of CRC errors found in consecutive C1-C6.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfNiuSlEsFrameCount 1.3.6.1.2.1.10.146.1.5.1.1.29
NIU Error Parameter: SL-ESF_Frame_Count, the number of frames the statistics apply to.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfNiuSlotConfigurationCount 1.3.6.1.2.1.10.146.1.5.1.1.30
NIU Error Parameter: Slot_Configuration_Count, the number of R-byte sets (Rxa-Rxc) used to calculate Slot_Configuration_CRC_Error_Count.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfNiuRSErrCorrectable 1.3.6.1.2.1.10.146.1.5.1.1.31
NIU Error Parameter: Reed_Solomon_Errors_Correctable, MPEG frames received with correctable Reed-Solomon Errors (IB only).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfNiuRSErrNonCorrectable 1.3.6.1.2.1.10.146.1.5.1.1.32
NIU Error Parameter: Reed_Solomon_Errors_Non_Correctable, MPEG frames received with non-correctable Reed-Solomon Errors (IB only).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfNiuSignOnTime 1.3.6.1.2.1.10.146.1.5.1.1.33
The value of sysUpTime at the time this NIU was signed on. If the time is unknown, this value shall be zero.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

dvbInaIfNiuDsChBytes 1.3.6.1.2.1.10.146.1.5.1.1.34
Number of bytes sent in direction INA to NIU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

dvbInaIfNiuUsChBytes 1.3.6.1.2.1.10.146.1.5.1.1.35
Number of bytes sent in direction NIU to INA. Includes backbone, NIU-to-NIU and broadcast/multicast traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

dvbInaIfNiuTimeRanging 1.3.6.1.2.1.10.146.1.5.1.1.36
Number of times the NIU has been time ranged.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfNiuPowerRanging 1.3.6.1.2.1.10.146.1.5.1.1.37
Number of times the NIU has been power ranged.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dvbInaIfConTable 1.3.6.1.2.1.10.146.1.6.1
Contains information about DVB-RC MAC connections.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfConEntry

dvbInaIfConEntry 1.3.6.1.2.1.10.146.1.6.1.1
Initially the table shall be empty. A new entry for a connection is automatically generated when a Resource Request Message is received from the NIU in question requesting a new connection. Also during reprovisioning new entries are created. Furthermore, the manager through the dvbInaIfConAccessStatus object can create new entries. Connection table entries shall be deleted, when the associated NIU entry is deleted. Furthermore, the manager can delete unused connection entries. The following parameters can only be set when the connection is in state down(1) dvbInaIfConAccessStatus, dvbInaIfConEncapsulation, dvbInaIfConFilterMACAddress, dvbInaIfConPID.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfConEntry  

dvbInaIfConNiuMacAddress 1.3.6.1.2.1.10.146.1.6.1.1.1
MAC address of the NIU that is associated with the connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

dvbInaIfConConnectionId 1.3.6.1.2.1.10.146.1.6.1.1.2
Specifies the connection identifier to be used for this connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfConCurrentState 1.3.6.1.2.1.10.146.1.6.1.1.3
Current state of the connection. The following states are possible: down(1) In this state an entry is made in the connection table for the connection in question. However, there is not (yet) any connection on MAC layer between the INA and NIU. settingUp(2) Either the NIU in question has requested a connection via a [MAC] Resource Request message, or the manager has initiated a (new) connection by setting dvbInaConDesiredState to the state Up. up(3) In this state the connection in question is up and running. breakingDown(4) Either the NIU in question has requested to release the connection via a [MAC] Resource Request message, or the manager has initiated the release of the connection by setting dvbInaConDesiredState to the state: Down. downAlloc(5) In this state an entry is made in the connection table for the connection in question. Furthermore, the bandwidth for the fixed rate connection is allocated. However, the connection doesn't (yet) exist on MAC layer between the INA and NIU. alarm(6) The connection in question is in the alarm state. his means that either the parameter setting is not valid, or the scheduler of the MAC has not the resources to allocate the requested bandwidth for a fixed rate connection, or the NIU didn't response in time during the set-up of the connection or during the break down of it. This state shall be left, when either the manager sets dvbInaConDesiredState to Down(1) or, the NIU enters the Null(1) state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(1), settingUp(2), up(3), breakingDown(4), downAlloc(5), alarm(6)  

dvbInaIfConDesiredState 1.3.6.1.2.1.10.146.1.6.1.1.4
Desired state for the connection. The following desired states are possible: down(1), up(3) and, downAlloc(5).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER down(1), up(3), downAlloc(5)  

dvbInaIfConConnectionType 1.1.3.6.1.2.1.10.146.1.6.1.1.5
Specifies the kind of connection: fixed rate, contention based, or reservation based. This parameter can be set to a value that is an OR of the following bits: 'conTypeFixedRate(0)' 'conTypeContention(1)' 'conTypeReservation(2)' Default this object is 'conTypeContention(1)'.
Status: current Access: read-create
OBJECT-TYPE    
  BITS conTypeFixedRate(0), conTypeContention(1), conTypeReservation(2)  

dvbInaIfConAccessStatus 1.3.6.1.2.1.10.146.1.6.1.1.6
Controls and reflects the status of this row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dvbInaIfConEncapsulation 1.3.6.1.2.1.10.146.1.6.1.1.7
This object indicates the type of encapsulation provided on this connection. This object can have one of the following values: 'directIp(1)', 'ethernetMacBridging(2)', or 'ppp(3)'. By default this parameter is set to 'directIp(1)'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER directIp(1), ethernetMacBridging(2), ppp(3)  

dvbInaIfConAtmDownstreamVCC 1.3.6.1.2.1.10.146.1.6.1.1.8
ATM concatenated VPI and VCI Virtual Path Identifiers that is used for downstream OoB transmission.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16777215  

dvbInaIfConAtmUpstreamVCC 1.3.6.1.2.1.10.146.1.6.1.1.9
ATM concatenated VPI and VCI Virtual Path Identifiers that is used for upstream transmission.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16777215  

dvbInaIfConFilterMACAddress 1.3.6.1.2.1.10.146.1.6.1.1.10
Specifies the 'soft' MPEG MPE MAC address used to filter the data out of the downstream IB transmission. This is found in the Downstream_Multiprotocol_CBD substructure in the Connect Message.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

dvbInaIfConPID 1.3.6.1.2.1.10.146.1.6.1.1.11
Specifies the MPEG PID of the elementary stream that carries the data.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..8191  

dvbInaIfConMaxContentionMsgLen 1.3.6.1.2.1.10.146.1.6.1.1.12
The Maximum_Contention_Access_Message_Length in the Connect Message. This is the maximum length of a message that may be transmitted using contention access. Any message greater than this should use reservation access. The default value should be dvbInaIfMacMaxContentionMsgLen.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..255  

dvbInaIfConMaxReservationMsgLen 1.3.6.1.2.1.10.146.1.6.1.1.13
This is the maximum length of a message that may be transmitted using a single reservation access. Any message greater than this should be transmitted by making multiple reservation requests. The default value should be dvbInaIfMacMaxReservationMsgLen.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfConAuxFlags 1.3.6.1.2.1.10.146.1.6.1.1.14
The Connection_Control_Field_Aux from the Connect Message Structure. This is used to indicate if the Priority, Downstream flowspec and Session binding objects are used for the connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfConQosTable 1.3.6.1.2.1.10.146.1.6.2
Contains information about connection quality for DVB-RC MAC connections. Both upstream and downstream quality parameters are found.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfConQosEntry

dvbInaIfConQosEntry 1.3.6.1.2.1.10.146.1.6.2.1
An entry in the table is automatically created when a new entry in the connection table connection is created and the INA supports Quality of Service on the MAC layer. You must always create an entry in the Connection table first and this will automatically create an entry in the QoS table. The entries are deleted when the contection table entry is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfConQosEntry  

dvbInaIfConQosPriority 1.3.6.1.2.1.10.146.1.6.2.1.1
The priority of the connection. Connections with low priority field value can be reprovisioned in order to accommodate the requirements of connections with high priority field. Standard data flow applications 0-79 Applications with QoS requirements 80-200 High priority applications 201-255
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfConQosDsReqMaxPacketSize 1.3.6.1.2.1.10.146.1.6.2.1.2
A downstream QoS parameter. Defines the requested maximum packet size in the downstream. The parameter can be set either by the managment system, or by the INA according to the NIU resource request. The packet size includes propriety protocols header, transport protocol (UDP/TCP) header, and the IP header. The packet size does not include the Ethernet header.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfConQosDsReqBitrate 1.3.6.1.2.1.10.146.1.6.2.1.3
A downstream QoS parameter. Defines requested average bit rate in the downstream. The parameter can be set either by the managment system, or by the INA according to the NIU resource request.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfConQosDsReqJitter 1.3.6.1.2.1.10.146.1.6.2.1.4
A downstream QoS parameter. Defines the requested maximum allowed jitter in the downstream. The parameter can be set either by the managment system, or by the INA according to the NIU resource request.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfConQosDsAllocMaxPacketSize 1.3.6.1.2.1.10.146.1.6.2.1.5
A downstream QoS parameter. This is the actual maximum packet size supported by the INA in the downstream. The packet size includes propriety protocols header, transport protocol (UDP/TCP) header, and the IP header. The packet size does not include the Ethernet header.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfConQosDsAllocBitrate 1.3.6.1.2.1.10.146.1.6.2.1.6
A downstream QoS parameter. This is the actual average bit rate supported by the INA in the downstream.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfConQosDsAllocJitter 1.3.6.1.2.1.10.146.1.6.2.1.7
A downstream QoS parameter. This is the actual maximum jitter supported by the INA in the downstream.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfConQosUsReqBw 1.3.6.1.2.1.10.146.1.6.2.1.8
An upstream QoS parameter. The requested bandwidth for the upstream. The parameter can be set either by the managment system, or by the INA according to the NIU resource request.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..16777215  

dvbInaIfConQosUsReqMaxDistSlots 1.3.6.1.2.1.10.146.1.6.2.1.9
An upstream QoS parameter. The requested maximum distance between slots for the upstream. The parameter can be set either by the managment system, or by the INA according to the NIU resource request.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfConQosUsReqFrameLength 1.3.6.1.2.1.10.146.1.6.2.1.10
An upstream QoS parameter. The requested frame length for the upstream. The parameter can be set either by the managment system, or by the INA according to the NIU resource request.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfConQosUsAllocBw 1.3.6.1.2.1.10.146.1.6.2.1.11
An upstream QoS parameter. The actual allocated bandwidth for the upstream.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16777215  

dvbInaIfConQosUsAllocMaxDistSlots 1.3.6.1.2.1.10.146.1.6.2.1.12
An upstream QoS parameter. The allocated distance between slots for the upstream. In case of using a cyclic assignment, this is the parameter sent by the INA in the connect message. In the case of reservation access, this parameter is an average number, calculated by the INA to reflect the actual allocation.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfConQosUsAllocFrameLength 1.3.6.1.2.1.10.146.1.6.2.1.13
An upstream QoS parameter. The allocated frame length for the upstream. In case of using a cyclic assignment, this is the parameter sent by the INA in the connect message. In the case of reservation access, this parameter is an average number, calculated by the INA to reflect the actual allocation.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfConQosUsReqFixedRateMethod 1.3.6.1.2.1.10.146.1.6.2.1.14
An upstream QoS parameter. Request a specific fixed rate slot assignment method to be used. If cyclic then cyclic assignment is used. If slotList then the slot list method is used. The parameter can be set either by the managment system, or by the INA according to the NIU resource request. If the bit Cyclic_Assignment_Needed is set, the NIU requests the cyclic method. Otherwise the slot list method.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cyclic(1), slotList(2)  

dvbInaIfConQosUsAllocFixedRateMethod 1.3.6.1.2.1.10.146.1.6.2.1.15
An upstream QoS parameter. Reflects the actual fixed rate slot assignment method that is used. If cyclic then cyclic assignment is used. If slotList then the slot list method is used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cyclic(1), slotList(2)  

dvbInaIfConSesTable 1.3.6.1.2.1.10.146.1.6.3
Contains information about session binding for DVB-RC MAC connections.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfConSesEntry

dvbInaIfConSesEntry 1.3.6.1.2.1.10.146.1.6.3.1
An entry in the table is automatically created when a new entry in the connection table connection is created if the INA and the NIU supports session binding. The entries are deleted when the contection table entry is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfConSesEntry  

dvbInaIfConSesUsControl 1.3.6.1.2.1.10.146.1.6.3.1.1
Control which fields of the upstream session binding parameters that are used.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfConSesUsNiuClientSrcIpType 1.3.6.1.2.1.10.146.1.6.3.1.2
The type of the IP source address of the NIU client.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

dvbInaIfConSesUsNiuClientSrcIp 1.3.6.1.2.1.10.146.1.6.3.1.3
The IP source address of the NIU client. Only used if bit 0 of dvbInaIfConSesUsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

dvbInaIfConSesUsNiuClientDstIpType 1.3.6.1.2.1.10.146.1.6.3.1.4
The type of the IP destination address of the NIU client.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

dvbInaIfConSesUsNiuClientDstIp 1.3.6.1.2.1.10.146.1.6.3.1.5
The IP destination address of the NIU client. Only used if bit 1 of dvbInaIfConSesUsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

dvbInaIfConSesUsNiuClientSrcPort 1.3.6.1.2.1.10.146.1.6.3.1.6
The source port of the NIU client. Only used if bit 2 of dvbInaIfConSesUsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfConSesUsNiuClientDstPort 1.3.6.1.2.1.10.146.1.6.3.1.7
The destination port of the NIU client. Only used if bit 3 of dvbInaIfConSesUsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfConSesUsTransportProtocol 1.3.6.1.2.1.10.146.1.6.3.1.8
The transport protocol used by the NIU client (UDP/TCP). This is the 8-bit protocol field in the IP header. Only used if bit 4 of dvbInaIfConSesUsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfConSesUsNiuClientSrcMac 1.3.6.1.2.1.10.146.1.6.3.1.9
The Ethernet source MAC address of the NIU client. Only used if bit 5 of dvbInaIfConSesUsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

dvbInaIfConSesUsNiuClientDstMac 1.3.6.1.2.1.10.146.1.6.3.1.10
The Ethernet destination MAC address of the NIU client. Only used if bit 6 of dvbInaIfConSesUsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

dvbInaIfConSesUsEthernetProtocol 1.3.6.1.2.1.10.146.1.6.3.1.11
The ethernet protocol, as described in the ethernet header. This is the type field in the Ethernet protocol header. Only used if bit 7 of dvbInaIfConSesUsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfConSesUsSessionId 1.3.6.1.2.1.10.146.1.6.3.1.12
The session_Id, as defined for PPPoE protocol. Only used if bit 8 of dvbInaIfConSesUsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfConSesDsControl 1.3.6.1.2.1.10.146.1.6.3.1.13
Control which fields of the downstream session binding parameters that are used.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfConSesDsInaClientSrcIpType 1.3.6.1.2.1.10.146.1.6.3.1.14
The type of the IP source address of the INA client.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

dvbInaIfConSesDsInaClientSrcIp 1.3.6.1.2.1.10.146.1.6.3.1.15
The IP source address of the INA client. Only used if bit 0 of dvbInaIfConSesDsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

dvbInaIfConSesDsInaClientDstIpType 1.3.6.1.2.1.10.146.1.6.3.1.16
The type of the IP destination address of the INA client.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

dvbInaIfConSesDsInaClientDstIp 1.3.6.1.2.1.10.146.1.6.3.1.17
The IP destination address of the INA client. Only used if bit 1 of dvbInaIfConSesDsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

dvbInaIfConSesDsInaClientSrcPort 1.3.6.1.2.1.10.146.1.6.3.1.18
The source port of the INA client. Only used if bit 2 of dvbInaIfConSesDsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfConSesDsInaClientDstPort 1.3.6.1.2.1.10.146.1.6.3.1.19
The destination port of the INA client. Only used if bit 3 of dvbInaIfConSesDsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfConSesDsTransportProtocol 1.3.6.1.2.1.10.146.1.6.3.1.20
The transport protocol used by the INA client (UDP/TCP). This is the 8-bit protocol field in the IP header. Only used if bit 4 of dvbInaIfConSesDsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfConSesDsInaClientSrcMac 1.3.6.1.2.1.10.146.1.6.3.1.21
The Ethernet source MAC address of the INA client. Only used if bit 5 of dvbInaIfConSesDsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

dvbInaIfConSesDsInaClientDstMac 1.3.6.1.2.1.10.146.1.6.3.1.22
The Ethernet destination MAC address of the INA client. Only used if bit 6 of dvbInaIfConSesDsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

dvbInaIfConSesDsEthernetProtocol 1.3.6.1.2.1.10.146.1.6.3.1.23
The ethernet protocol, as described in the ethernet header. This is the type field in the Ethernet protocol header. Only used if bit 7 of dvbInaIfConSesDsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfConSesDsSessionId 1.3.6.1.2.1.10.146.1.6.3.1.24
The session_Id, as defined for PPPoE protocol. Only used if bit 8 of dvbInaIfConSesDsControl is set.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfConHdrSupTable 1.3.6.1.2.1.10.146.1.6.4
Table contains information about the header suppression for a connection, indexed trough the Connection ID and the Context ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfConHdrSupEntry

dvbInaIfConHdrSupEntry 1.3.6.1.2.1.10.146.1.6.4.1
An entry in the table is automatically generated when a new header suppression starts. Or when a reprovisioning is made. An entry is deleted when the connection is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfConHdrSupEntry  

dvbInaIfConHdrSupContextId 1.3.6.1.2.1.10.146.1.6.4.1.1
The context ID for the header suppression session.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..127  

dvbInaIfConHdrSupDirection 1.3.6.1.2.1.10.146.1.6.4.1.2
The direction for this the header suppression session.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER upstream(1), downstream(2)  

dvbInaIfConHdrSupControl 1.3.6.1.2.1.10.146.1.6.4.1.3
String of bits that control the use of the header suppression. Each of the first 103 bits, indicates if a byte in the header is suppressed or not. Bit 103 is used as an overall suppression enable. If a mask bit is 0, the matching header byte is suppressed. If bit 103 is set, suppression is performed. Bit 103 is the least significant bit in octet 13. See also dvbInaIfConHdrSupHeader.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(13)  

dvbInaIfConHdrSupGeneration 1.3.6.1.2.1.10.146.1.6.4.1.4
The generation number that is attached to the header fields value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..15  

dvbInaIfConHdrSupHeaderLength 1.3.6.1.2.1.10.146.1.6.4.1.5
The number of usefull bytes in the suppression header. This is the number of the last zero in the dvbInaIfConHdrSupControl.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..103  

dvbInaIfConHdrSupHeader 1.3.6.1.2.1.10.146.1.6.4.1.6
The header used for header suppression. Both fixed and changing fields together. Only the first dvbInaIfConHdrSupHeaderLength is used.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(103)  

dvbInaIfReprovSrcNiuTable 1.3.6.1.2.1.10.146.1.7.1
The table describes information created on INA 1 for a NIU that is about to be reprovisioned.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfReprovSrcNiuEntry

dvbInaIfReprovSrcNiuEntry 1.3.6.1.2.1.10.146.1.7.1.1
An entry in the table is created by the manager when a NIU is about to be reprovisioned. When the reprovisioning is done and the NIU entry is deleted after dvbInaIfNiuLifetime this entry will be deleted too.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfReprovSrcNiuEntry  

dvbInaIfReprovSrcNiuRowAccessStatus 1.3.6.1.2.1.10.146.1.7.1.1.1
Controls and reflects the status of this row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dvbInaIfReprovSrcNiuCommand 1.3.6.1.2.1.10.146.1.7.1.1.2
Controls the reprovisioning on INA 1. When set to reprovStart the actual reporvisioning on INA 1 is initiated with a Reprovisioning Message to the NIU. Everything must be prepared for the reprovisioning when this is done. When read the response will always be reprovIdle.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER reprovIdle(1), reprovStart(2)  

dvbInaIfReprovSrcNiuDsChFrequency 1.3.6.1.2.1.10.146.1.7.1.1.3
The centre of the new downstream frequency when the NIU is reprovisioned to INA 2.
Status: current Access: read-create
OBJECT-TYPE    
  DownFrequency  

dvbInaIfReprovSrcNiuDsChSymbolRate 1.3.6.1.2.1.10.146.1.7.1.1.4
Specifies the new symbol rate for the Downstream channel when the NIU is reprovisioned.
Status: current Access: read-create
OBJECT-TYPE    
  DownstreamSymbolrate  

dvbInaIfReprovSrcNiuDsChModulation 1.3.6.1.2.1.10.146.1.7.1.1.5
Specifies the new modulation for the Downstream channel when the NIU is reprovisioned.
Status: current Access: read-create
OBJECT-TYPE    
  Modulation  

dvbInaIfReprovSrcNiuDsChType 1.3.6.1.2.1.10.146.1.7.1.1.6
Specifies if the new Downstream channel is inband or out-of-band when the NIU is reprovisioned.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ib(1), oob(2)  

dvbInaIfReprovSrcNiuUsChFrequency 1.3.6.1.2.1.10.146.1.7.1.1.7
Specifies the new upstream channel frequency in Hz when the NIU is reprovisoned.
Status: current Access: read-create
OBJECT-TYPE    
  UpFrequency  

dvbInaIfReprovSrcNiuUsChSymbolRate 1.3.6.1.2.1.10.146.1.7.1.1.8
Specifies the new upstream channel symbol rate when the NIU is reprovisoned.
Status: current Access: read-create
OBJECT-TYPE    
  UpstreamSymbolrate  

dvbInaIfReprovSrcNiuUsChModulation 1.3.6.1.2.1.10.146.1.7.1.1.9
Specifies the new upstream modulation when the NIU is reprovisoned.
Status: current Access: read-create
OBJECT-TYPE    
  Modulation  

dvbInaIfReprovSrcNiuUsChId 1.3.6.1.2.1.10.146.1.7.1.1.10
Specifies the new logical channel number associated with the upstream channel when the NIU is reprovisioned.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

dvbInaIfReprovDstNiuTable 1.3.6.1.2.1.10.146.1.7.2
The table describes information created on INA 2 for a NIU that is about to be reprovisioned.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfReprovDstNiuEntry

dvbInaIfReprovDstNiuEntry 1.3.6.1.2.1.10.146.1.7.2.1
An entry in the table is created by the manager when a NIU is about to be reprovisioned. When the reprovisioning is done and the NIU signs on to INA 2 the information is transfered to the NIU table and the entry in this table is deleted automatically.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfReprovDstNiuEntry  

dvbInaIfReprovDstNiuMacAddress 1.3.6.1.2.1.10.146.1.7.2.1.1
A 48-bit value representing the unique MAC address of the NIU to be reprovisioned. This is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

dvbInaIfReprovDstNiuRowAccessStatus 1.3.6.1.2.1.10.146.1.7.2.1.2
Controls and reflects the status of this row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dvbInaIfReprovDstNiuCommand 1.3.6.1.2.1.10.146.1.7.2.1.3
Controls the reprovisioning on INA 2. When set to reprovPrepare INA 2 will generate the necessary information that needs to be transferred back to INA 1. This includes: New Connection ID's New PID for each connection New downstream VPI/VCI New upstream VPI/VCI New upstream number Furthermore new fixed rate parameters are calculated if one of the new connections are fixed rate. All settings needed to calculate these new parameters must be given before reprovPrepare is set. When set to reprovReceiveNiu this is an indication to INA 2 that the NIU is expected to sign-on now. When read the response will always be reprovIdle.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER reprovIdle(1), reprovPrepare(2), reprovReceiveNiu(3)  

dvbInaIfReprovDstNiuDownIfIndex 1.3.6.1.2.1.10.146.1.7.2.1.4
Specifies the IfIndex of the downstream channel on which the NIU is tuned after the reprovisioning.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

dvbInaIfReprovDstNiuUpIfIndex 1.3.6.1.2.1.10.146.1.7.2.1.5
Specifies the IfIndex of the upstream channel that is used by the NIU after the reprovisioning.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

dvbInaIfReprovDstNiuLifetime 1.3.6.1.2.1.10.146.1.7.2.1.6
Defines how long time after the NIU signs off, the NIU entry is removed from the NIU table. An infinite(0) value would mean that the values are stored at least until the next reboot of the INA
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfReprovSrcConTable 1.3.6.1.2.1.10.146.1.7.3
Contains information about DVB-RC MAC connections on INA 1 that is about to be reprovisioned.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfReprovSrcConEntry

dvbInaIfReprovSrcConEntry 1.3.6.1.2.1.10.146.1.7.3.1
The entries in the table are created by the manager when a NIU on INA 1 is about to be reprovisioned. After the NIU is reprovisoned the entries are automatically deleted when the corresponding NUI entry are deleted after dvbInaIfNiuLifetime.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfReprovSrcConEntry  

dvbInaIfReprovSrcConRowAccessStatus 1.3.6.1.2.1.10.146.1.7.3.1.1
Controls and reflects the status of this row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dvbInaIfReprovSrcConConnectionIdNew 1.3.6.1.2.1.10.146.1.7.3.1.2
Specifies the new value for the connection identifier to be used for this connection after the reprovisioning. The management system must get this value from INA 2.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfReprovSrcConPID 1.3.6.1.2.1.10.146.1.7.3.1.3
Specifies the new MPEG PID of the elementary stream that carries the data after the reprovisioning.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..8191  

dvbInaIfReprovSrcConDsVc 1.3.6.1.2.1.10.146.1.7.3.1.4
ATM concatenated VPI and VCI Virtual Path Identifiers that is used for downstream OoB transmission after reprovisioning. The management system must get this value from INA 2.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..16777215  

dvbInaIfReprovSrcConUsVc 1.3.6.1.2.1.10.146.1.7.3.1.5
ATM concatenated VPI and VCI Virtual Path Identifiers that is used for upstream transmission after reprovisioning. The management system must get this value from INA 2.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..16777215  

dvbInaIfReprovDstConTable 1.3.6.1.2.1.10.146.1.7.4
Contains information about DVB-RC MAC connections that is about to be reprovisioned to INA 2.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfReprovDstConEntry

dvbInaIfReprovDstConEntry 1.3.6.1.2.1.10.146.1.7.4.1
The entries in the table are created by the manager when a NIU is about to be reprovisioned to INA 2. After the NIU has signed on to INA 2, the information in the tables are used to create entries in the normal connection tables. When the entries in the normal tables are made the entries in the reprovisioning table are automatically deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfReprovDstConEntry  

dvbInaIfReprovDstConConnectionIdOld 1.3.6.1.2.1.10.146.1.7.4.1.1
Specifies the old value for the connection identifier that is used on INA 1. The management system must get this value from INA 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfReprovDstConRowAccessStatus 1.3.6.1.2.1.10.146.1.7.4.1.2
Controls and reflects the status of this row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dvbInaIfReprovDstConConnectionIdNew 1.3.6.1.2.1.10.146.1.7.4.1.3
Specifies the new value for the connection identifier that is used on INA 2. INA 2 creates this value when dvbInaIfReprovDstNiuCommand is set to reprovPrepare.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfReprovDstConConnectionType 1.1.3.6.1.2.1.10.146.1.7.4.1.4
Specifies the kind of connection: fixed rate, contention based, or reservation based. This parameter can be set to a value that is an OR of the following bits: 'conTypeFixedRate(0)' 'conTypeContention(1)' 'conTypeReservation(2)' Default this object is 'conTypeContention(1)'.
Status: current Access: read-create
OBJECT-TYPE    
  BITS conTypeFixedRate(0), conTypeContention(1), conTypeReservation(2)  

dvbInaIfReprovDstConEncapsulation 1.3.6.1.2.1.10.146.1.7.4.1.5
This object indicates the type of encapsulation provided on this connection. This object can have one of the following values: 'directIp(1)', 'ethernetMacBridging(2)', or 'ppp(3)'. By default this parameter is set to 'directIp(1)'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER directIp(1), ethernetMacBridging(2), ppp(3)  

dvbInaIfReprovDstConAtmDownstreamVCC 1.3.6.1.2.1.10.146.1.7.4.1.6
ATM concatenated VPI and VCI Virtual Path Identifiers that is used for downstream OoB transmission. INA 2 creates this value when dvbInaIfReprovDstNiuCommand is set to reprovPrepare.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16777215  

dvbInaIfReprovDstConAtmUpstreamVCC 1.3.6.1.2.1.10.146.1.7.4.1.7
ATM concatenated VPI and VCI Virtual Path Identifiers that is used for upstream transmission. INA 2 creates this value when dvbInaIfReprovDstNiuCommand is set to reprovPrepare.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16777215  

dvbInaIfReprovDstConFilterMACAddress 1.3.6.1.2.1.10.146.1.7.4.1.8
Specifies the 'soft' MPEG MPE MAC address used to filter the data out of the downstream IB transmission. This is found in the Downstream_Multiprotocol_CBD substructure in the Connect Message.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

dvbInaIfReprovDstConPID 1.3.6.1.2.1.10.146.1.7.4.1.9
Specifies the MPEG PID of the elementary stream that carries the data. INA 2 creates this value when dvbInaIfReprovDstNiuCommand is set to reprovPrepare.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..8191  

dvbInaIfReprovDstConMaxContentionMsgLen 1.3.6.1.2.1.10.146.1.7.4.1.10
The Maximum_Contention_Access_Message_Length in the Connect Message. This is the maximum length of a message that may be transmitted using contention access. Any message greater than this should use reservation access. The default value should be dvbInaIfMacMaxContentionMsgLen.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..255  

dvbInaIfReprovDstConMaxReservationMsgLen 1.3.6.1.2.1.10.146.1.7.4.1.11
This is the maximum length of a message that may be transmitted using a single reservation access. Any message greater than this should be transmitted by making multiple reservation requests. The default value should be dvbInaIfMacMaxReservationMsgLen.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfReprovDstConAuxFlags 1.3.6.1.2.1.10.146.1.7.4.1.12
The Connection_Control_Field_Aux from the Connect Message Structure. This is used to indicate if the Priority, Downstream flowspec and Session binding objects are used for the connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfReprovDstConSesTable 1.3.6.1.2.1.10.146.1.7.5
Contains information about DVB-RC MAC connections that is about to be reprovisioned to INA 2.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfReprovDstConSesEntry

dvbInaIfReprovDstConSesEntry 1.3.6.1.2.1.10.146.1.7.5.1
The entries in the table are created automatically when an entry in the dvbInaIfReprovDstConTable is created and the INA support session binding. You must always create an entry in the dvbInaIfReprovDstConTable first and this will automatically create an entry in the dvbInaIfReprovDstConSesTable table. After the NIU has signed on to INA 2, the information in the table are used to create entries in the normal connection tables. When the entries in the normal tables are made the entries in the reprovisioning table are automatically deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfReprovDstConSesEntry  

dvbInaIfReprovDstConSesUsControl 1.3.6.1.2.1.10.146.1.7.5.1.1
Control which fields of the upstream session binding parameters that are used.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfReprovDstConSesUsNiuClientSrcIpType 1.3.6.1.2.1.10.146.1.7.5.1.2
The type of the IP source address of the NIU client.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

dvbInaIfReprovDstConSesUsNiuClientSrcIp 1.3.6.1.2.1.10.146.1.7.5.1.3
The IP source address of the NIU client. Only used if bit 0 of dvbInaIfReprovDstConSesUsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

dvbInaIfReprovDstConSesUsNiuClientDstIpType 1.3.6.1.2.1.10.146.1.7.5.1.4
The type of the IP destination address of the NIU client.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

dvbInaIfReprovDstConSesUsNiuClientDstIp 1.3.6.1.2.1.10.146.1.7.5.1.5
The IP destination address of the NIU client. Only used if bit 1 of dvbInaIfReprovDstConSesUsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

dvbInaIfReprovDstConSesUsNiuClientSrcPort 1.3.6.1.2.1.10.146.1.7.5.1.6
The source port of the NIU client. Only used if bit 2 of dvbInaIfReprovDstConSesUsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfReprovDstConSesUsNiuClientDstPort 1.3.6.1.2.1.10.146.1.7.5.1.7
The destination port of the NIU client. Only used if bit 3 of dvbInaIfReprovDstConSesUsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfReprovDstConSesUsTransportProtocol 1.3.6.1.2.1.10.146.1.7.5.1.8
The transport protocol used by the NIU client (UDP/TCP). This is the 8-bit protocol field in the IP header. Only used if bit 4 of dvbInaIfReprovDstConSesUsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfReprovDstConSesUsNiuClientSrcMac 1.3.6.1.2.1.10.146.1.7.5.1.9
The Ethernet source MAC address of the NIU client. Only used if bit 5 of dvbInaIfReprovDstConSesUsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

dvbInaIfReprovDstConSesUsNiuClientDstMac 1.3.6.1.2.1.10.146.1.7.5.1.10
The Ethernet destination MAC address of the NIU client. Only used if bit 6 of dvbInaIfReprovDstConSesUsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

dvbInaIfReprovDstConSesUsEthernetProtocol 1.3.6.1.2.1.10.146.1.7.5.1.11
The ethernet protocol, as described in the ethernet header. This is the type field in the Ethernet protocol header. Only used if bit 7 of dvbInaIfReprovDstConSesUsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfReprovDstConSesUsSessionId 1.3.6.1.2.1.10.146.1.7.5.1.12
The session_Id, as defined for PPPoE protocol. Only used if bit 8 of dvbInaIfReprovDstConSesUsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfReprovDstConSesDsControl 1.3.6.1.2.1.10.146.1.7.5.1.13
Control which fields of the downstream session binding parameters that are used.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfReprovDstConSesDsInaClientSrcIpType 1.3.6.1.2.1.10.146.1.7.5.1.14
The type of the IP source address of the INA client.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

dvbInaIfReprovDstConSesDsInaClientSrcIp 1.3.6.1.2.1.10.146.1.7.5.1.15
The IP source address of the INA client. Only used if bit 0 of dvbInaIfReprovDstConSesDsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

dvbInaIfReprovDstConSesDsInaClientDstIpType 1.3.6.1.2.1.10.146.1.7.5.1.16
The type of the IP destination address of the INA client.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

dvbInaIfReprovDstConSesDsInaClientDstIp 1.3.6.1.2.1.10.146.1.7.5.1.17
The IP destination address of the INA client. Only used if bit 1 of dvbInaIfReprovDstConSesDsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

dvbInaIfReprovDstConSesDsInaClientSrcPort 1.3.6.1.2.1.10.146.1.7.5.1.18
The source port of the INA client. Only used if bit 2 of dvbInaIfReprovDstConSesDsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfReprovDstConSesDsInaClientDstPort 1.3.6.1.2.1.10.146.1.7.5.1.19
The destination port of the INA client. Only used if bit 3 of dvbInaIfReprovDstConSesDsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfReprovDstConSesDsTransportProtocol 1.3.6.1.2.1.10.146.1.7.5.1.20
The transport protocol used by the INA client (UDP/TCP). This is the 8-bit protocol field in the IP header. Only used if bit 4 of dvbInaIfReprovDstConSesDsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfReprovDstConSesDsInaClientSrcMac 1.3.6.1.2.1.10.146.1.7.5.1.21
The Ethernet source MAC address of the INA client. Only used if bit 5 of dvbInaIfReprovDstConSesDsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

dvbInaIfReprovDstConSesDsInaClientDstMac 1.3.6.1.2.1.10.146.1.7.5.1.22
The Ethernet destination MAC address of the INA client. Only used if bit 6 of dvbInaIfReprovDstConSesDsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

dvbInaIfReprovDstConSesDsEthernetProtocol 1.3.6.1.2.1.10.146.1.7.5.1.23
The ethernet protocol, as described in the ethernet header. This is the type field in the Ethernet protocol header. Only used if bit 7 of dvbInaIfReprovDstConSesDsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfReprovDstConSesDsSessionId 1.3.6.1.2.1.10.146.1.7.5.1.24
The session_Id, as defined for PPPoE protocol. Only used if bit 8 of dvbInaIfReprovDstConSesDsControl is set.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dvbInaIfReprovDstConHdrSupTable 1.3.6.1.2.1.10.146.1.7.6
Contains information about DVB-RC MAC connections that is about to be reprovisioned to INA 2.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfReprovDstConHdrSupEntry

dvbInaIfReprovDstConHdrSupEntry 1.3.6.1.2.1.10.146.1.7.6.1
The entries in the table are created by the manager when a NIU is about to be reprovisioned to INA 2. After the NIU has signed on to INA 2, the information in the tables are used to create entries in the normal connection tables. When the entries in the normal tables are made the entries in the reprovisioning table are automatically deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfReprovDstConHdrSupEntry  

dvbInaIfReprovDstConHdrSupContextId 1.3.6.1.2.1.10.146.1.7.6.1.1
The context ID for the header suppression session.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..127  

dvbInaIfReprovDstConHdrSupDirection 1.3.6.1.2.1.10.146.1.7.6.1.2
The direction for this the header suppression session.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER upstream(1), downstream(2)  

dvbInaIfReprovDstConHdrSupRowAccessStatus 1.3.6.1.2.1.10.146.1.7.6.1.3
Controls and reflects the status of this row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dvbInaIfReprovDstConHdrSupControl 1.3.6.1.2.1.10.146.1.7.6.1.4
String of bits that control the use of the header suppression. Each of the fisrt 103 bits, indicates if a byte in the header is suppressed or not. Bit 103 is used as an overall suppression enable. If a mask bit is 0, the matching header byte is suppressed. If bit 103 is set, suppression is performed. Bit 103 is the least significant bit in octet 13. See also dvbInaIfReprovDstConHdrSupHeader.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(13)  

dvbInaIfReprovDstConHdrSupGeneration 1.3.6.1.2.1.10.146.1.7.6.1.5
The generation number that is attached to the header fields value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..15  

dvbInaIfReprovDstConHdrSupHeaderLength 1.3.6.1.2.1.10.146.1.7.6.1.6
The number of usefull bytes in the suppression header. This is the number of the last zero in the dvbInaIfReprovDstConHdrSupControl.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..103  

dvbInaIfReprovDstConHdrSupHeader 1.3.6.1.2.1.10.146.1.7.6.1.7
The header used for header suppression. Both fixed and changing fields together. Only the first dvbInaIfReprovDstConHdrSupHeaderLength is used.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(103)  

dvbInaIfReprovDstConQosTable 1.3.6.1.2.1.10.146.1.7.7
Contains information about DVB-RC MAC connections that is about to be reprovisioned to INA 2.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbInaIfReprovDstConQosEntry

dvbInaIfReprovDstConQosEntry 1.3.6.1.2.1.10.146.1.7.7.1
The entries in the table are created automatically when an entry in the dvbInaIfReprovDstConTable is created and the INA support QoS settings. After the NIU has signed on to INA 2, the information in the tables are used to create entries in the normal connection tables. When the entries in the normal tables are made the entries in the reprovisioning table are automatically deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbInaIfReprovDstConQosEntry  

dvbInaIfReprovDstConQosPriority 1.3.6.1.2.1.10.146.1.7.7.1.1
The priority of the connection. Connections with low priority field value can be reprovisioned in order to accommodate the requirements of connections with high priority field. Standard data flow applications 0-79 Applications with QoS requirements 80-200 High priority applications 201-255
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfReprovDstConQosDsReqMaxPacketSize 1.3.6.1.2.1.10.146.1.7.7.1.2
A downstream QoS parameter. Defines the requested maximum packet size in the downstream. The parameter can be set either by the managment system, or by the INA according to the NIU resource request. The packet size includes propriety protocols header, transport protocol (UDP/TCP) header, and the IP header. The packet size does not include the Ethernet header.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfReprovDstConQosDsReqBitrate 1.3.6.1.2.1.10.146.1.7.7.1.3
A downstream QoS parameter. Defines requested average bit rate in the downstream.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfReprovDstConQosDsReqJitter 1.3.6.1.2.1.10.146.1.7.7.1.4
A downstream QoS parameter. Defines the requested maximum allowed jitter in the downstream.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

dvbInaIfReprovDstConQosUsReqBw 1.3.6.1.2.1.10.146.1.7.7.1.5
An upstream QoS parameter. The requested bandwidth for the upstream.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..16777215  

dvbInaIfReprovDstConQosUsReqMaxDistSlots 1.3.6.1.2.1.10.146.1.7.7.1.6
An upstream QoS parameter. The requested maximum distance between slots for the upstream.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfReprovDstConQosUsReqFrameLength 1.3.6.1.2.1.10.146.1.7.7.1.7
An upstream QoS parameter. The requested frame length for the upstream.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbInaIfReprovDstConQosUsReqFixedRateMethod 1.3.6.1.2.1.10.146.1.7.7.1.8
An upstream QoS parameter. Request a specific fixed rate slot assignment method to be used. If cyclic then cyclic assignment is used. If slotList then the slot list method is used.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER cyclic(1), slotList(2)  

dvbInaIfCompliance 1.3.6.1.2.1.10.146.2.1.1
The compliance statement for EuroModem INAs which implement the DVB-CABLE-INA-IF-MIB MIB. An implementation only has to support IPv4 addresses to be compliant.
Status: current Access: read-only
MODULE-COMPLIANCE    

dvbInaIfMacGroup 1.3.6.1.2.1.10.146.2.2.1
A collection of objects providing capabilities and statistics for the MAC layer.
Status: current Access: read-only
OBJECT-GROUP    

dvbInaIfProvisionGroup 1.3.6.1.2.1.10.146.2.2.2
Tok_String
Status: current Access: read-only
OBJECT-GROUP    

dvbInaIfDsChGroup 1.3.6.1.2.1.10.146.2.2.3
Tok_String
Status: current Access: read-only
OBJECT-GROUP    

dvbInaIfUsChGroup 1.3.6.1.2.1.10.146.2.2.4
Tok_String
Status: current Access: read-only
OBJECT-GROUP    

dvbInaIfNiuGroup 1.3.6.1.2.1.10.146.2.2.5
Tok_String
Status: current Access: read-only
OBJECT-GROUP    

dvbInaIfConnectionGroup 1.3.6.1.2.1.10.146.2.2.6
Tok_String
Status: current Access: read-only
OBJECT-GROUP    

dvbInaIfConQosGroup 1.3.6.1.2.1.10.146.2.2.7
Tok_String
Status: current Access: read-only
OBJECT-GROUP    

dvbInaIfConSesGroup 1.3.6.1.2.1.10.146.2.2.8
Tok_String
Status: current Access: read-only
OBJECT-GROUP    

dvbInaIfConHdrSupGroup 1.3.6.1.2.1.10.146.2.2.9
Tok_String
Status: current Access: read-only
OBJECT-GROUP    

dvbInaIfReprovSrcNiuGroup 1.3.6.1.2.1.10.146.2.2.10
Tok_String
Status: current Access: read-only
OBJECT-GROUP    

dvbInaIfReprovDstNiuGroup 1.3.6.1.2.1.10.146.2.2.11
Tok_String
Status: current Access: read-only
OBJECT-GROUP    

dvbInaIfReprovSrcConGroup 1.3.6.1.2.1.10.146.2.2.12
Tok_String
Status: current Access: read-only
OBJECT-GROUP    

dvbInaIfReprovDstConGroup 1.3.6.1.2.1.10.146.2.2.13
Tok_String
Status: current Access: read-only
OBJECT-GROUP    

dvbInaIfReprovDstConSesGroup 1.3.6.1.2.1.10.146.2.2.14
Tok_String
Status: current Access: read-only
OBJECT-GROUP    

dvbInaIfReprovDstConHdrSupGroup 1.3.6.1.2.1.10.146.2.2.15
Tok_String
Status: current Access: read-only
OBJECT-GROUP    

dvbInaIfReprovDstConQosGroup 1.3.6.1.2.1.10.146.2.2.16
Tok_String
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor