ED-1032-MIB

File: ED-1032-MIB.mib (21902 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215

Imported symbols

enterprises Counter OBJECT-TYPE
TRAP-TYPE

Defined Types

DisplayString  
OCTET STRING    

Ed1032SysOperStatus  
INTEGER operational(1), redundant-failure(2), minor-failure(3), major-failure(4), not-operational(5)    

Ed1032SysState  
INTEGER online(1), coming-online(2), offline(3), going-offline(4)    

Ed1032FruCode  
INTEGER fru-bkplane(1), fru-ctp(2), fru-mpc(3), fru-cmm(4), fru-fan(5), fru-power(6), fru-panel(7), fru-gsm(8), fru-gls(9), fru-glx(10), fru-lsm(11), fru-gxx(12)    

Ed1032FruPosition  
INTEGER 0..255    

Ed1032FruStatus  
INTEGER active(1), backup(2), update-busy(3), failed(4)    

Ed1032PortIndex  
INTEGER 0..2048    

Ed1032PortPhyState  
INTEGER psNotInstalled(1), psAvailable(2), psBlocked(3), psUnavailable(4), psLinkFailure(5), psLinkFailLOL(6), psIntDiags(7), psExtLoop(8), psPortFail(9), psSR(10), psLR(11)    

Ed1032PortStatus  
INTEGER online(1), offline(2), testing(3), faulty(4)    

Ed1032PortAdmStatus  
INTEGER online(1), offline(2), testing(3)    

Ed1032FruEntry  
SEQUENCE    
  ed1032FruCode Ed1032FruCode
  ed1032FruPosition Ed1032FruPosition
  ed1032FruStatus Ed1032FruStatus
  ed1032FruPartNumber DisplayString Size(64)
  ed1032FruSerialNumber DisplayString Size(64)
  ed1032FruPowerOnHours Counter
  ed1032FruTestDate DisplayString Size(64)

Ed1032PortEntry  
SEQUENCE    
  ed1032PortIndex Ed1032PortIndex
  ed1032PortPhyState Ed1032PortPhyState
  ed1032PortOpStatus Ed1032PortStatus
  ed1032PortAdmStatus Ed1032PortAdmStatus
  ed1032PortTxWords Counter
  ed1032PortRxWords Counter
  ed1032PortTxFrames Counter
  ed1032PortRxFrames Counter
  ed1032PortRxC2Frames Counter
  ed1032PortRxC3Frames Counter
  ed1032PortRxLCs Counter
  ed1032PortRxMcasts Counter
  ed1032PortTooManyRdys Counter
  ed1032PortNoTxCredits Counter
  ed1032PortRxEncFrs Counter
  ed1032PortRxCrcs Counter
  ed1032PortRxTruncs Counter
  ed1032PortRxTooLongs Counter
  ed1032PortRxBadEofs Counter
  ed1032PortRxBadOs Counter
  ed1032PortC3Discards Counter
  ed1032PortMcastTimedOuts Counter
  ed1032PortTxMcasts Counter
  ed1032PortTxThroughput Counter
  ed1032PortRxThroughput Counter

Defined Values

mcData 1.3.6.1.4.1.289
OBJECT IDENTIFIER    

commDev 1.3.6.1.4.1.289.2
OBJECT IDENTIFIER    

fibreChannel 1.3.6.1.4.1.289.2.1
OBJECT IDENTIFIER    

fcSwitch 1.3.6.1.4.1.289.2.1.1
OBJECT IDENTIFIER    

ed-1032 1.3.6.1.4.1.289.2.1.1.1
OBJECT IDENTIFIER    

ed1032Sys 1.3.6.1.4.1.289.2.1.1.1.1
OBJECT IDENTIFIER    

ed1032Fru 1.3.6.1.4.1.289.2.1.1.1.2
OBJECT IDENTIFIER    

ed1032Port 1.3.6.1.4.1.289.2.1.1.1.3
OBJECT IDENTIFIER    

ed1032SysCurrentDate 1.3.6.1.4.1.289.2.1.1.1.1.1
The current date information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

ed1032SysBootDate 1.3.6.1.4.1.289.2.1.1.1.1.2
The date and time of the last IPL
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

ed1032SysFirmwareVersion 1.3.6.1.4.1.289.2.1.1.1.1.3
The current version of the firmware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(24)  

ed1032SysTypeNum 1.3.6.1.4.1.289.2.1.1.1.1.4
This object identifies ASCII type number for the unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

ed1032SysModelNum 1.3.6.1.4.1.289.2.1.1.1.1.5
This object identifies ASCII model number for the unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

ed1032SysMfg 1.3.6.1.4.1.289.2.1.1.1.1.6
This object identifies ASCII manufacturer for the unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

ed1032SysPlantOfMfg 1.3.6.1.4.1.289.2.1.1.1.1.7
This object identifies ASCII plant of manufacturer for the unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

ed1032SysSeqNum 1.3.6.1.4.1.289.2.1.1.1.1.8
This object identifies ASCII sequence number for the unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

ed1032SysEcLevel 1.3.6.1.4.1.289.2.1.1.1.1.9
This object identifies ASCII EC level ID for the unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

ed1032SysOemSerialNum 1.3.6.1.4.1.289.2.1.1.1.1.10
This object identifies ASCII OEM serial number for the unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

ed1032SysOperStatus 1.3.6.1.4.1.289.2.1.1.1.1.11
The current operational status of the switch. The values are defined as follow: operational (1), redundant-failure (2), minor-failure (3), major-failure (4), not-operational (5).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ed1032SysOperStatus  

ed1032SysState 1.3.6.1.4.1.289.2.1.1.1.1.12
If the edOperStatus of the switch is operational, the switch will be in one of the four states: online(1), coming-online(2), offline(3), and going-offline(4).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ed1032SysState  

ed1032SysAdmStatus 1.3.6.1.4.1.289.2.1.1.1.1.13
The desired administrative status of the switch. A management station may place the switch in a desired state by setting this object accordingly. The desired administrative status are online(1) and offline(2). The online means setting the switch to be accessible by an external Fibre Channel port, and offline means setting the switch to be inaccessible.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER online(1), offline(2)  

ed1032FruTable 1.3.6.1.4.1.289.2.1.1.1.2.1
A table that contains one entry for each module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ed1032FruEntry

ed1032FruEntry 1.3.6.1.4.1.289.2.1.1.1.2.1.1
An entry containing the service parameters of the module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ed1032FruEntry  

ed1032FruCode 1.3.6.1.4.1.289.2.1.1.1.2.1.1.1
Field Replaceable Unit. A hardware component of the product that is replaceable as an entire unit. Each module defined in this MIB has a fixed FRU code. The values are defined as follow: fru-none (0) , fru-bkplane (1), fru-ctp (2), fru-mpc (3), fru-cmm (4), fru-fan (5), fru-power (6), fru-panel (7), fru-gsm (8), fru-gls (9), fru-glx (10), fru-lsm (11), fru-gxx (12).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ed1032FruCode  

ed1032FruPosition 1.3.6.1.4.1.289.2.1.1.1.2.1.1.2
This object identifies the position of the module. Port cards start from 1 to 8. All other cards start from 1 to 1 or 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ed1032FruPosition  

ed1032FruStatus 1.3.6.1.4.1.289.2.1.1.1.2.1.1.3
This object identifies the operational status of the module. The active(1) state indicates that the current module is active. The backup(2) state indicates that the back up module is used. update-busy (3) state indicates that the module is in the updating process. The failed(4) state indicates that the current module is failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ed1032FruStatus  

ed1032FruPartNumber 1.3.6.1.4.1.289.2.1.1.1.2.1.1.4
This object identifies the part number of the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

ed1032FruSerialNumber 1.3.6.1.4.1.289.2.1.1.1.2.1.1.5
This object identifies the serial number of the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

ed1032FruPowerOnHours 1.3.6.1.4.1.289.2.1.1.1.2.1.1.6
This object indicates the number of the hours that the FRU has been in operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032FruTestDate 1.3.6.1.4.1.289.2.1.1.1.2.1.1.7
This object indicates final test date of the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

ed1032PortTable 1.3.6.1.4.1.289.2.1.1.1.3.1
A table that contains one entry for each switch port (stitch only).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ed1032PortEntry

ed1032PortEntry 1.3.6.1.4.1.289.2.1.1.1.3.1.1
An entry containing the information of the switch port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ed1032PortEntry  

ed1032PortIndex 1.3.6.1.4.1.289.2.1.1.1.3.1.1.1
This object identifies the switch port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ed1032PortIndex  

ed1032PortPhyState 1.3.6.1.4.1.289.2.1.1.1.3.1.1.2
This object identifies the physical state of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ed1032PortPhyState  

ed1032PortOpStatus 1.3.6.1.4.1.289.2.1.1.1.3.1.1.3
This object identifies the operational status of the port. The online state indicates that user frames can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ed1032PortStatus  

ed1032PortAdmStatus 1.3.6.1.4.1.289.2.1.1.1.3.1.1.4
The desired state of the port. A management station may place the port in a desired state by setting this object accordingly. The testing(3) state indicates that no user frames can be passed. As the result of either explicit management action or per configuration information accessible by the switch, ed1032PortAdmStatus is then changed to either the online(1) or testing(3) states, or remains in the offline state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Ed1032PortAdmStatus  

ed1032PortTxWords 1.3.6.1.4.1.289.2.1.1.1.3.1.1.11
This object counts the number of Fibre Channel words that the port has transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortRxWords 1.3.6.1.4.1.289.2.1.1.1.3.1.1.12
This object counts the number of Fibre Channel words that the port has received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortTxFrames 1.3.6.1.4.1.289.2.1.1.1.3.1.1.13
This object counts the number of (Fibre Channel) frames that the port has transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortRxFrames 1.3.6.1.4.1.289.2.1.1.1.3.1.1.14
This object counts the number of (Fibre Channel) frames that the port has received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortRxC2Frames 1.3.6.1.4.1.289.2.1.1.1.3.1.1.15
This object counts the number of Class 2 frames that the port has received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortRxC3Frames 1.3.6.1.4.1.289.2.1.1.1.3.1.1.16
This object counts the number of Class 3 frames that the port has received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortRxLCs 1.3.6.1.4.1.289.2.1.1.1.3.1.1.17
This object counts the number of Link Control frames that the port has received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortRxMcasts 1.3.6.1.4.1.289.2.1.1.1.3.1.1.18
This object counts the number of Multicast frames that the port has received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortTooManyRdys 1.3.6.1.4.1.289.2.1.1.1.3.1.1.19
This object counts the number of times when RDYs exceeds the frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortNoTxCredits 1.3.6.1.4.1.289.2.1.1.1.3.1.1.20
This object counts the amount of time that frame transmission is blocked by a transmit credit of zero. This is sampled once every 120 53.125 MHZ clocks, and the counter is incremented by 1 if the condition is true.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortRxEncFrs 1.3.6.1.4.1.289.2.1.1.1.3.1.1.21
This object counts the number of encoding error or disparity error inside or outside frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortRxCrcs 1.3.6.1.4.1.289.2.1.1.1.3.1.1.22
This object counts the number of CRC errors detected for frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortRxTruncs 1.3.6.1.4.1.289.2.1.1.1.3.1.1.23
This object counts the number of truncated frames that the port has received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortRxTooLongs 1.3.6.1.4.1.289.2.1.1.1.3.1.1.24
This object counts the number of received frames that are too long.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortRxBadEofs 1.3.6.1.4.1.289.2.1.1.1.3.1.1.25
This object counts the number of received frames that have bad EOF delimiter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortRxBadOs 1.3.6.1.4.1.289.2.1.1.1.3.1.1.26
This object counts the number of invalid Ordered Sets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortC3Discards 1.3.6.1.4.1.289.2.1.1.1.3.1.1.27
This object counts the number of Class 3 frames that the port has discarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortMcastTimedOuts 1.3.6.1.4.1.289.2.1.1.1.3.1.1.28
This object counts the number of Multicast frames that has been timed out.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortTxMcasts 1.3.6.1.4.1.289.2.1.1.1.3.1.1.29
This object counts the number of Multicast frames that has been transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortTxThroughput 1.3.6.1.4.1.289.2.1.1.1.3.1.1.30
This object presents the Bps transmission rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortRxThroughput 1.3.6.1.4.1.289.2.1.1.1.3.1.1.31
This object presents the Bps reception rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ed1032PortScn 1
An ed1032PortScn(1) is generated whenever a Fc_Port changes its operational state. For instance, the Fc_Port goes from on-line to offline.
TRAP-TYPE    

ed1032FruScn 2
An ed1032FruScn(2) is generated whenever a FRU status changes its operational state.
TRAP-TYPE