EMC-MIB
File:
EMC-MIB.mib (208042 bytes)
Imported modules
Imported symbols
Defined Types
| SystemCodes |
|
| SEQUENCE |
|
|
|
| |
syscodesBuffer |
Opaque |
|
| |
syscodesNumberofRecords |
INTEGER |
|
| |
syscodesRecordSize |
INTEGER |
|
| |
syscodesFirstRecordNumber |
INTEGER |
|
| |
syscodesMaxRecords |
INTEGER |
|
| SystemCodesRecords |
|
| SEQUENCE |
|
|
|
| |
syscodesDirectorType |
INTEGER |
|
| |
syscodesDirectorNum |
INTEGER |
|
| |
emulCodeType |
DisplayString |
|
| |
emulVersion |
INTEGER |
|
| |
emulDate |
Opaque |
|
| |
emulChecksum |
INTEGER |
|
| |
emulMTPF |
INTEGER |
|
| |
emulFileCount |
INTEGER |
|
| |
implCodeType |
DisplayString |
|
| |
implVersion |
INTEGER |
|
| |
implDate |
Opaque |
|
| |
implChecksum |
INTEGER |
|
| |
implMTPF |
INTEGER |
|
| |
implFileCount |
INTEGER |
|
| |
initCodeType |
DisplayString |
|
| |
initVersion |
INTEGER |
|
| |
initDate |
Opaque |
|
| |
initChecksum |
INTEGER |
|
| |
initMTPF |
INTEGER |
|
| |
initFileCount |
INTEGER |
|
| |
escnCodeType |
DisplayString |
|
| |
escnVersion |
INTEGER |
|
| |
escnDate |
Opaque |
|
| |
escnChecksum |
INTEGER |
|
| |
escnMTPF |
INTEGER |
|
| |
escnFileCount |
INTEGER |
|
| DadConfiguration |
|
| SEQUENCE |
|
|
|
| |
dadcnfigBuffer |
Opaque |
|
| |
dadcnfigNumberofRecords |
INTEGER |
|
| |
dadcnfigRecordSize |
INTEGER |
|
| |
dadcnfigFirstRecordNumber |
INTEGER |
|
| |
dadcnfigMaxRecords |
INTEGER |
|
| DadcnfigRecords |
|
| SEQUENCE |
|
|
|
| |
dadcnfigSymmNumber |
INTEGER |
|
| |
dadcnfigMirrors |
Opaque |
|
| |
dadcnfigMirror1Director |
INTEGER |
|
| |
dadcnfigMirror1Interface |
INTEGER |
|
| |
dadcnfigMirror2Director |
INTEGER |
|
| |
dadcnfigMirror2Interface |
INTEGER |
|
| |
dadcnfigMirror3Director |
INTEGER |
|
| |
dadcnfigMirror3Interface |
INTEGER |
|
| |
dadcnfigMirror4Director |
INTEGER |
|
| |
dadcnfigMirror4Interface |
INTEGER |
|
| DvhoaddrConfiguration |
|
| SEQUENCE |
|
|
|
| |
dvhoaddrBuffer |
Opaque |
|
| |
dvhoaddrNumberofRecords |
INTEGER |
|
| |
dvhoaddrRecordSize |
INTEGER |
|
| |
dvhoaddrFirstRecordNumber |
INTEGER |
|
| |
dvhoaddrMaxRecords |
INTEGER |
|
| DvhoaddrRecords |
|
| SEQUENCE |
|
|
|
| |
dvhoaddrSymmNumber |
INTEGER |
|
| |
dvhoaddrDirectorNumber |
INTEGER |
|
| |
dvhoaddrPortAType |
INTEGER |
|
| |
dvhoaddrPortADeviceAddress |
Opaque |
|
| |
dvhoaddrPortBType |
INTEGER |
|
| |
dvhoaddrPortBDeviceAddress |
Opaque |
|
| |
dvhoaddrPortCType |
INTEGER |
|
| |
dvhoaddrPortCDeviceAddress |
Opaque |
|
| |
dvhoaddrPortDType |
INTEGER |
|
| |
dvhoaddrPortDDeviceAddress |
Opaque |
|
| |
dvhoaddrMetaFlags |
Opaque |
|
| |
dvhoaddrFiberChannelAddress |
INTEGER |
|
| Discovery |
|
| SEQUENCE |
|
|
|
| |
discIndex |
INTEGER |
|
| |
discSerialNumber |
DisplayString |
|
| |
discRawDevice |
DisplayString |
|
| |
discModel |
INTEGER |
|
| |
discCapacity |
INTEGER |
|
| |
discChecksum |
INTEGER |
|
| |
discConfigDate |
DisplayString |
|
| |
discRDF |
INTEGER |
|
| |
discBCV |
INTEGER |
|
| |
discState |
INTEGER |
|
| |
discStatus |
INTEGER |
|
| |
discMicrocodeVersion |
DisplayString |
|
| |
discSymapisrv-IP |
IpAddress |
|
| |
discNumEvents |
INTEGER |
|
| |
discEventCurrID |
INTEGER |
|
| SubagentInfo |
|
| SEQUENCE |
|
|
|
| |
subagentSymmetrixSerialNumber |
DisplayString |
|
| |
subagentProcessActive |
INTEGER |
|
| |
subagentTraceMessagesEnable |
INTEGER |
|
| StateValues |
|
| INTEGER |
enabled(0), disabled(1), mixed(2), state-na(3) |
|
|
| DirectorType |
|
| INTEGER |
fibre-channel(0), scsi-adapter(1), disk-adapter(2), channel-adapter(3), memory-board(4), escon-adapter(5), rdf-adapter-r1(6), rdf-adapter-r2(7), rdf-adapter-bi(8) |
|
|
| PortStatus |
|
| INTEGER |
status-na(0), on(1), off(2), wd(3) |
|
|
| SCSIWidth |
|
| INTEGER |
not-applicable(0), narrow(1), wide(2), ultra(3) |
|
|
| DeviceStatus |
|
| INTEGER |
ready(0), not-ready(1), write-disabled(2), not-applicable(3), mixed(4) |
|
|
| DeviceType |
|
| INTEGER |
not-applicable(1), local-data(2), raid-s(4), raid-s-parity(8), remote-r1-data(16), remote-r2-data(32), hot-spare(128) |
|
|
| DeviceEmulation |
|
| INTEGER |
emulation-na(0), fba(1), as400(2), icl(3), unisys-fba(4), ckd-3380(5), ckd-3390(6) |
|
|
| SCSIMethod |
|
| INTEGER |
method-na(0), synchronous(1), asynchronous(2) |
|
|
| BCVState |
|
| INTEGER |
never-established(0), in-progress(1), synchronous(2), split-in-progress(3), split-before-sync(4), split(5), split-no-incremental(6), restore-in-progress(7), restored(8), split-before-restore(9), invalid(10) |
|
|
| RDFPairState |
|
| INTEGER |
invalid(100), syncinprog(101), synchronized(102), split(103), suspended(104), failed-over(105), partitioned(106), r1-updated(107), r1-updinprog(108), mixed(109), state-na(110) |
|
|
| RDFMode |
|
| INTEGER |
synchronous(0), semi-synchronous(1), adaptive-copy(2), mixed(3), rdf-mode-na(4) |
|
|
| RDFAdaptiveCopy |
|
| INTEGER |
disabled(0), wp-mode(1), disk-mode(2), mixed(3), ac-na(4) |
|
|
| SymmEventEntry |
|
| SEQUENCE |
|
|
|
| |
symmEventIndex |
INTEGER |
1..2147483647 |
| |
symmEventTime |
DisplayString |
|
| |
symmEventSeverity |
INTEGER |
|
| |
symmEventDescr |
DisplayString |
|
Defined Values
| emc |
1.3.6.1.4.1.1139 |
| OBJECT IDENTIFIER |
|
|
|
| systemCodes |
1.3.6.1.4.1.1139.1.2.1.258 |
| OBJECT IDENTIFIER |
|
|
|
| control |
1.3.6.1.4.1.1139.1.2.2 |
| OBJECT IDENTIFIER |
|
|
|
| discovery |
1.3.6.1.4.1.1139.1.3 |
| OBJECT IDENTIFIER |
|
|
|
| analyzer |
1.3.6.1.4.1.1139.1.4.1000 |
| OBJECT IDENTIFIER |
|
|
|
| clients |
1.3.6.1.4.1.1139.1.4.1001 |
| OBJECT IDENTIFIER |
|
|
|
| trapSetup |
1.3.6.1.4.1.1139.1.4.1002 |
| OBJECT IDENTIFIER |
|
|
|
| activePorts |
1.3.6.1.4.1.1139.1.4.1003 |
| OBJECT IDENTIFIER |
|
|
|
| mainframeVariables |
1.3.6.1.4.1.1139.1.5 |
| OBJECT IDENTIFIER |
|
|
|
| symAPI |
1.3.6.1.4.1.1139.1.6 |
| OBJECT IDENTIFIER |
|
|
|
| symAPIList |
1.3.6.1.4.1.1139.1.6.1 |
| OBJECT IDENTIFIER |
|
|
|
| symList |
1.3.6.1.4.1.1139.1.6.1.1 |
| OBJECT IDENTIFIER |
|
|
|
| symDevList |
1.3.6.1.4.1.1139.1.6.1.3 |
| OBJECT IDENTIFIER |
|
|
|
| symDgList |
1.3.6.1.4.1.1139.1.6.1.7 |
| OBJECT IDENTIFIER |
|
|
|
| symAPIShow |
1.3.6.1.4.1.1139.1.6.2 |
| OBJECT IDENTIFIER |
|
|
|
| symShow |
1.3.6.1.4.1.1139.1.6.2.1 |
| OBJECT IDENTIFIER |
|
|
|
| symDevShow |
1.3.6.1.4.1.1139.1.6.2.2 |
| OBJECT IDENTIFIER |
|
|
|
| symmEvent |
1.3.6.1.4.1.1139.1.7 |
| OBJECT IDENTIFIER |
|
|
|
| emcControlCenter |
1.3.6.1.4.1.1139.1.1 |
| A list of EMC Control Center specific variables entries. The number
of entries is given by the value of discoveryTableSize. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
ESMVariables |
|
| esmVariables |
1.3.6.1.4.1.1139.1.1.1 |
| An entry containing objects for a particular Symmertrix. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
ESMVariables |
|
|
| emcSymCnfg |
1.3.6.1.4.1.1139.1.1.1.1 |
| symmetrix.cnfg disk variable |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymDiskCfg |
1.3.6.1.4.1.1139.1.1.1.2 |
| Symmetrix DISKS CONFIGURATION data |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymMirrorDiskCfg |
1.3.6.1.4.1.1139.1.1.1.3 |
| Symmetrix MIRRORED DISKS CONFIGURATION data |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymMirror3DiskCfg |
1.3.6.1.4.1.1139.1.1.1.4 |
| Symmetrix MIRRORED3 DISKS CONFIGURATION data |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymMirror4DiskCfg |
1.3.6.1.4.1.1139.1.1.1.5 |
| Symmetrix MIRRORED4 DISKS CONFIGURATION data |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymStatistics |
1.3.6.1.4.1.1139.1.1.1.6 |
| Symmetrix STATISTICS data |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymUtilA7 |
1.3.6.1.4.1.1139.1.1.1.7 |
| UTILITY A7 -- Show disks 'W PEND' tracks counts |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| emcSymRdfMaint |
1.3.6.1.4.1.1139.1.1.1.8 |
| Symmetrix Remote Data Facility Maintenance |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymWinConfig |
1.3.6.1.4.1.1139.1.1.1.9 |
| EMC ICDA Manager CONFIGURATION data |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymDir |
1.3.6.1.4.1.1139.1.1.1.11 |
| Symmetrix director information. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymDevStats |
1.3.6.1.4.1.1139.1.1.1.12 |
| Symmetrix error stats |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymSumStatus |
1.3.6.1.4.1.1139.1.1.1.13 |
| Symmetrix Summary Status.
0 = no errors
1 = warning
2+ = Fatal error
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcRatiosOutofRange |
1.3.6.1.4.1.1139.1.1.1.14 |
| Symmetrix Write/Hit Ratio Status. A bit-wise integer
value indicating hit or write ratio out of range. If
(value & 1) then hit ratio out of specified range. If
(value & 2) then write ratio out of specified range.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| emcSymPortStats |
1.3.6.1.4.1.1139.1.1.1.15 |
| Symmetrix port statistics |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymBCVDevice |
1.3.6.1.4.1.1139.1.1.1.16 |
| Symmetrix BCV Device information |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymSaitInfo |
1.3.6.1.4.1.1139.1.1.1.17 |
| Symmetrix SCSI/Fiber channel information |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymTimefinderInfo |
1.3.6.1.4.1.1139.1.1.1.18 |
| Symmetrix Tinmefinder information |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymSRDFInfo |
1.3.6.1.4.1.1139.1.1.1.19 |
| Symmetrix RDF Device information |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymPhysDevStats |
1.3.6.1.4.1.1139.1.1.1.20 |
| Symmetrix Physical Device Statistics |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymSumStatusErrorCodes |
1.3.6.1.4.1.1139.1.1.1.98 |
| A Colon-delimited list of error codes that caused the
error in emcSymSumStatus
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| sysinfoBuffer |
1.3.6.1.4.1.1139.1.2.1.257.1.1.1 |
| The entire return buffer of system call 0x0101 for the
indicated Symmetrix. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| sysinfoNumberofRecords |
1.3.6.1.4.1.1139.1.2.1.257.1.1.2 |
| The count of the number of records in the buffer returned
by Syscall 0x0101. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sysinfoRecordSize |
1.3.6.1.4.1.1139.1.2.1.257.1.1.3 |
| This object is the size of one record in the buffer returned
by Syscall 0x0101. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sysinfoFirstRecordNumber |
1.3.6.1.4.1.1139.1.2.1.257.1.1.4 |
| This object is the first record number in the buffer returned
by Syscall 0x0101. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sysinfoMaxRecords |
1.3.6.1.4.1.1139.1.2.1.257.1.1.5 |
| This object is the maximum number of records available in this
Symmetrix for Syscall 0x0101. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sysinfoRecordsTable |
1.3.6.1.4.1.1139.1.2.1.257.2 |
| This table provides a method to access one device record
within the buffer returned by Syscall 0x0101. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SysinfoRecords |
|
| sysinfoRecordsEntry |
1.3.6.1.4.1.1139.1.2.1.257.2.1 |
| One entire record of system information for the indicated
Symmetrix. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SysinfoRecords |
|
|
| sysinfoSerialNumber |
1.3.6.1.4.1.1139.1.2.1.257.2.1.1 |
| This object describes the serial number of indicated Symmetrix. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(16) |
|
| sysinfoNumberofDirectors |
1.3.6.1.4.1.1139.1.2.1.257.2.1.19 |
| The number of directors in this Symmetrix.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sysinfoNumberofVolumes |
1.3.6.1.4.1.1139.1.2.1.257.2.1.23 |
| This object describes the number of logical
devices present on the system. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sysinfoMemorySize |
1.3.6.1.4.1.1139.1.2.1.257.2.1.25 |
| The amount of memory, in Megabytes, in the system. This is also
the last memory address in the system
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| systemCodesTable |
1.3.6.1.4.1.1139.1.2.1.258.1 |
| A table of Symmetrix information contain is the results of
Syscall 0x0102 for the specified Symmetrix instance.
The number of entries is given by the value discIndex. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SystemCodes |
|
| systemCodesEntry |
1.3.6.1.4.1.1139.1.2.1.258.1.1 |
| An entry containing objects for the indicated systemCodesTable
element. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SystemCodes |
|
|
| syscodesBuffer |
1.3.6.1.4.1.1139.1.2.1.258.1.1.1 |
| The entire return buffer of system call 0x0102.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| syscodesNumberofRecords |
1.3.6.1.4.1.1139.1.2.1.258.1.1.2 |
| The count of the number of records in the buffer returned
by Syscall 0x0102. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| syscodesRecordSize |
1.3.6.1.4.1.1139.1.2.1.258.1.1.3 |
| This object is the size of one record in the buffer returned
by Syscall 0x0102. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| syscodesFirstRecordNumber |
1.3.6.1.4.1.1139.1.2.1.258.1.1.4 |
| This object is the first record number in the buffer returned
by Syscall 0x0102. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| syscodesMaxRecords |
1.3.6.1.4.1.1139.1.2.1.258.1.1.5 |
| This object is the maximum number of records available in this
Symmetrix for Syscall 0x0102. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| systemCodesRecordsTable |
1.3.6.1.4.1.1139.1.2.1.258.2 |
| This table provides a method to access one director record
within the buffer returned by Syscall 0x0102. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SystemCodesRecords |
|
| systemCodesRecordsEntry |
1.3.6.1.4.1.1139.1.2.1.258.2.1 |
| One entire record of system code information for the
the indicated Symmetrix and director. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SystemCodesRecords |
|
|
| syscodesDirectorType |
1.3.6.1.4.1.1139.1.2.1.258.2.1.1 |
| The 1 byte director type identifier.
1 - Parallel Channel Adapter card
2 - ESCON Adapter card
3 - SCSI Adapter card
4 - Disk Adapter card
5 - RDF Adapter card
6 - Fiber Channel Adapter card
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
parallel-adapter(1), escon-adapter(2), scsi-adapter(3), disk-adapter(4), remote-adapter(5), fiber-adapter(6) |
|
| syscodesDirectorNum |
1.3.6.1.4.1.1139.1.2.1.258.2.1.2 |
| The index to the table. The number of instances should be
the number of Directors. The instance we are interested in at any
point would be the Director number.
NOTE: Director numbering may be zero based. If so, then an
instance is Director number plus 1.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| emulCodeType |
1.3.6.1.4.1.1139.1.2.1.258.2.1.5 |
| The 4 byte code type of the director. Value is 'EMUL'
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..4) |
|
| emulVersion |
1.3.6.1.4.1.1139.1.2.1.258.2.1.6 |
| The 4 byte version of the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| emulDate |
1.3.6.1.4.1.1139.1.2.1.258.2.1.7 |
| The 4 byte version date for the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emulChecksum |
1.3.6.1.4.1.1139.1.2.1.258.2.1.8 |
| The 4 byte checksum for the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| emulMTPF |
1.3.6.1.4.1.1139.1.2.1.258.2.1.9 |
| The 4 byte MTPF of the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| emulFileCount |
1.3.6.1.4.1.1139.1.2.1.258.2.1.10 |
| The 4 byte file length of the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| implCodeType |
1.3.6.1.4.1.1139.1.2.1.258.2.1.11 |
| The 4 byte code type of the director. Value is 'IMPL'
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..4) |
|
| implVersion |
1.3.6.1.4.1.1139.1.2.1.258.2.1.12 |
| The 4 byte version of the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| implDate |
1.3.6.1.4.1.1139.1.2.1.258.2.1.13 |
| The 4 byte version date for the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| implChecksum |
1.3.6.1.4.1.1139.1.2.1.258.2.1.14 |
| The 4 byte checksum for the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| implMTPF |
1.3.6.1.4.1.1139.1.2.1.258.2.1.15 |
| The 4 byte MTPF of the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| implFileCount |
1.3.6.1.4.1.1139.1.2.1.258.2.1.16 |
| The 4 byte file length of the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| initCodeType |
1.3.6.1.4.1.1139.1.2.1.258.2.1.17 |
| The 4 byte code type of the director. Value is 'INIT'
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..4) |
|
| initVersion |
1.3.6.1.4.1.1139.1.2.1.258.2.1.18 |
| The 4 byte version of the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| initDate |
1.3.6.1.4.1.1139.1.2.1.258.2.1.19 |
| The 4 byte version date for the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| initChecksum |
1.3.6.1.4.1.1139.1.2.1.258.2.1.20 |
| The 4 byte checksum for the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| initMTPF |
1.3.6.1.4.1.1139.1.2.1.258.2.1.21 |
| The 4 byte MTPF of the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| initFileCount |
1.3.6.1.4.1.1139.1.2.1.258.2.1.22 |
| The 4 byte file length of the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| escnCodeType |
1.3.6.1.4.1.1139.1.2.1.258.2.1.23 |
| The 4 byte code type of the director. Value is 'ESCN'
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..4) |
|
| escnVersion |
1.3.6.1.4.1.1139.1.2.1.258.2.1.24 |
| The 4 byte version of the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| escnDate |
1.3.6.1.4.1.1139.1.2.1.258.2.1.25 |
| The 4 byte version date for the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| escnChecksum |
1.3.6.1.4.1.1139.1.2.1.258.2.1.26 |
| The 4 byte checksum for the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| escnMTPF |
1.3.6.1.4.1.1139.1.2.1.258.2.1.27 |
| The 4 byte MTPF of the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| escnFileCount |
1.3.6.1.4.1.1139.1.2.1.258.2.1.28 |
| The 4 byte file length of the director's code.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| diskAdapterDeviceConfigurationTable |
1.3.6.1.4.1.1139.1.2.1.273.1 |
| A table of Symmetrix information contain is the results of
Syscall 0x0111 for the specified Symmetrix instance.
The number of entries is given by the value discIndex. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DadConfiguration |
|
| diskAdapterDeviceConfigurationEntry |
1.3.6.1.4.1.1139.1.2.1.273.1.1 |
| An entry containing objects for the indicated
diskAdapterDeviceConfigurationTable element. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DadConfiguration |
|
|
| dadcnfigBuffer |
1.3.6.1.4.1.1139.1.2.1.273.1.1.1 |
| The entire return buffer of system call 0x0111.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| dadcnfigNumberofRecords |
1.3.6.1.4.1.1139.1.2.1.273.1.1.2 |
| The count of the number of records in the buffer returned
by Syscall 0x0111. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dadcnfigRecordSize |
1.3.6.1.4.1.1139.1.2.1.273.1.1.3 |
| This object is the size of one record in the buffer returned
by Syscall 0x0111. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dadcnfigFirstRecordNumber |
1.3.6.1.4.1.1139.1.2.1.273.1.1.4 |
| This object is the first record number in the buffer returned
by Syscall 0x0111. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dadcnfigMaxRecords |
1.3.6.1.4.1.1139.1.2.1.273.1.1.5 |
| This object is the maximum number of records available in this
Symmetrix for Syscall 0x0111. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dadcnfigDeviceRecordsTable |
1.3.6.1.4.1.1139.1.2.1.273.2 |
| This table provides a method to access one device record
within the buffer returned by Syscall 0x0111. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DadcnfigRecords |
|
| dadcnfigDeviceRecordsEntry |
1.3.6.1.4.1.1139.1.2.1.273.2.1 |
| One entire record of disk adapter device configuration information
for the indicated Symmetrix. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DadcnfigRecords |
|
|
| dadcnfigSymmNumber |
1.3.6.1.4.1.1139.1.2.1.273.2.1.1 |
| The 2 byte Symmetrix number of the device.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dadcnfigMirrors |
1.3.6.1.4.1.1139.1.2.1.273.2.1.8 |
| an 8 byte buffer, 4 mirrors * 2 bytes per, indicating director
and port assignments for this device's mirrors.
Buffer format is:
mir 1 mir 2 mir 3 mir 4
*----+----*----+----*----+----*----+----+
|DIR |i/f |DIR |i/f |DIR |i/f |DIR |i/f |
| # | | # | | # | | # | |
*----+----*----+----*----+----*----+----+
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| dadcnfigMirror1Director |
1.3.6.1.4.1.1139.1.2.1.273.2.1.9 |
| The director number of this device's Mirror 1 device.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dadcnfigMirror1Interface |
1.3.6.1.4.1.1139.1.2.1.273.2.1.10 |
| The interface number of this device's Mirror 1 device.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dadcnfigMirror2Director |
1.3.6.1.4.1.1139.1.2.1.273.2.1.11 |
| The director number of this device's Mirror 2 device.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dadcnfigMirror2Interface |
1.3.6.1.4.1.1139.1.2.1.273.2.1.12 |
| The interface number of this device's Mirror 2 device.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dadcnfigMirror3Director |
1.3.6.1.4.1.1139.1.2.1.273.2.1.13 |
| The director number of this device's Mirror 3 device.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dadcnfigMirror3Interface |
1.3.6.1.4.1.1139.1.2.1.273.2.1.14 |
| The interface number of this device's Mirror 3 device.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dadcnfigMirror4Director |
1.3.6.1.4.1.1139.1.2.1.273.2.1.15 |
| The director number of this device's Mirror 4 device.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dadcnfigMirror4Interface |
1.3.6.1.4.1.1139.1.2.1.273.2.1.16 |
| The interface number of this device's Mirror 4 device.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| deviceHostAddressConfigurationTable |
1.3.6.1.4.1.1139.1.2.1.281.1 |
| A table of Symmetrix information contain is the results of
Syscall 0x0119 for the specified Symmetrix instance.
The number of entries is given by the value discIndex. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DvhoaddrConfiguration |
|
| deviceHostAddressConfigurationEntry |
1.3.6.1.4.1.1139.1.2.1.281.1.1 |
| An entry containing objects for the indicated
deviceHostAddressConfigurationTable element. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DvhoaddrConfiguration |
|
|
| dvhoaddrBuffer |
1.3.6.1.4.1.1139.1.2.1.281.1.1.1 |
| The entire return buffer of system call 0x0119.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| dvhoaddrNumberofRecords |
1.3.6.1.4.1.1139.1.2.1.281.1.1.2 |
| The count of the number of records in the buffer returned
by Syscall 0x0119. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dvhoaddrRecordSize |
1.3.6.1.4.1.1139.1.2.1.281.1.1.3 |
| This object is the size of one record in the buffer returned
by Syscall 0x0119. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dvhoaddrFirstRecordNumber |
1.3.6.1.4.1.1139.1.2.1.281.1.1.4 |
| This object is the first record number in the buffer returned
by Syscall 0x0119. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dvhoaddrMaxRecords |
1.3.6.1.4.1.1139.1.2.1.281.1.1.5 |
| This object is the maximum number of records available in this
Symmetrix for Syscall 0x0119. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dvhoaddrDeviceRecordsTable |
1.3.6.1.4.1.1139.1.2.1.281.2 |
| This table provides a method to access one device record
record within the buffer returned by Syscall 0x0119. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DvhoaddrRecords |
|
| dvhoaddrDeviceRecordsEntry |
1.3.6.1.4.1.1139.1.2.1.281.2.1 |
| One entire record of device host address information for the
indicated Symmetrix. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DvhoaddrRecords |
|
|
| dvhoaddrSymmNumber |
1.3.6.1.4.1.1139.1.2.1.281.2.1.1 |
| The 2 byte Symmetrix number of the device.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dvhoaddrDirectorNumber |
1.3.6.1.4.1.1139.1.2.1.281.2.1.2 |
| The 2 byte Symmetrix number of the director.
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dvhoaddrPortAType |
1.3.6.1.4.1.1139.1.2.1.281.2.1.3 |
| The type of port for Port A.
01 - Parallel CA
02 - ESCON CA
03 - SA
04 - Fiber Channel |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
parallel-ca(1), escon-ca(2), sa(3), fibre(6) |
|
| dvhoaddrPortADeviceAddress |
1.3.6.1.4.1.1139.1.2.1.281.2.1.4 |
| The 1 byte port address for this device on this port. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| dvhoaddrPortBType |
1.3.6.1.4.1.1139.1.2.1.281.2.1.5 |
| The type of port for Port A.
01 - Parallel CA
02 - ESCON CA
03 - SA
04 - Fiber Channel |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
parallel-ca(1), escon-ca(2), sa(3), fibre(6) |
|
| dvhoaddrPortBDeviceAddress |
1.3.6.1.4.1.1139.1.2.1.281.2.1.6 |
| The 1 byte port address for this device on this port. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| dvhoaddrPortCType |
1.3.6.1.4.1.1139.1.2.1.281.2.1.7 |
| The type of port for Port A.
01 - Parallel CA
02 - ESCON CA
03 - SA
04 - Fiber Channel |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
parallel-ca(1), escon-ca(2), sa(3), fibre(6) |
|
| dvhoaddrPortCDeviceAddress |
1.3.6.1.4.1.1139.1.2.1.281.2.1.8 |
| The 1 byte port address for this device on this port. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| dvhoaddrPortDType |
1.3.6.1.4.1.1139.1.2.1.281.2.1.9 |
| The type of port for Port A.
01 - Parallel CA
02 - ESCON CA
03 - SA
04 - Fiber Channel |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
parallel-ca(1), escon-ca(2), sa(3), fibre(6) |
|
| dvhoaddrPortDDeviceAddress |
1.3.6.1.4.1.1139.1.2.1.281.2.1.10 |
| The 1 byte port address for this device on this port. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| dvhoaddrFiberChannelAddress |
1.3.6.1.4.1.1139.1.2.1.281.2.1.15 |
| The 2 byte address if this record is a Fiber Channel
record. There is only 1 port defined. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| discoveryTableSize |
1.3.6.1.4.1.1139.1.3.1 |
| The number of Symmetrixes that are, or have been present on this
system. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| discoveryTable |
1.3.6.1.4.1.1139.1.3.2 |
| A list of Symmetrixes. The number of entries is given by the
value of discoveryTableSize. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
Discovery |
|
| discoveryTbl |
1.3.6.1.4.1.1139.1.3.2.1 |
| An interface entry containing objects for a particular
Symmetrix. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Discovery |
|
|
| discIndex |
1.3.6.1.4.1.1139.1.3.2.1.1 |
| A unique value for each Symmetrix. Its value
ranges between 1 and the value of discoveryTableSize. The
value for each Symmetrix must remain constant from one
agent re-initialization to the next re-initialization, or until
the agent's discovery list is reset. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| discSerialNumber |
1.3.6.1.4.1.1139.1.3.2.1.2 |
| The serial number of this attached Symmetrix |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| discRawDevice |
1.3.6.1.4.1.1139.1.3.2.1.3 |
| The 'gatekeeper' device the agent uses to extract information
from this Symmetrix, via the SCSI connection |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| discModel |
1.3.6.1.4.1.1139.1.3.2.1.4 |
| This Symmetrix Model number |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| discCapacity |
1.3.6.1.4.1.1139.1.3.2.1.5 |
| The size, in bytes of the 'gatekeeper' device for this Symmetrix
This object is obsolete in Mib Version 2.0. Agent revisions of 4.0
or greater will return a zero as a value. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| discChecksum |
1.3.6.1.4.1.1139.1.3.2.1.6 |
| The checksum value of the IMPL for this Symmetrix. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| discConfigDate |
1.3.6.1.4.1.1139.1.3.2.1.7 |
| The date of the last configuration change.
Format = MMDDYYYY
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| discRDF |
1.3.6.1.4.1.1139.1.3.2.1.8 |
| Indicates if RDF is available for this Symmetrix |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
false(0), true(1), unknown(2) |
|
| discBCV |
1.3.6.1.4.1.1139.1.3.2.1.9 |
| Indicates if BCV Devices are configured in this Symmetrix |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
false(0), true(1), unknown(2) |
|
| discState |
1.3.6.1.4.1.1139.1.3.2.1.10 |
| Indicates the online/offline state of this Symmetrix |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(1), online(2), offline(3) |
|
| discStatus |
1.3.6.1.4.1.1139.1.3.2.1.11 |
| Indicates the overall status of this Symmetrix |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(1), unused(2), ok(3), warning(4), failed(5) |
|
| discSymapisrv-IP |
1.3.6.1.4.1.1139.1.3.2.1.13 |
| The IP address of the symapi server from where this Symmetrix's
data is sourced. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| discNumEvents |
1.3.6.1.4.1.1139.1.3.2.1.14 |
| Number of events currently in the symmEventTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| discEventCurrID |
1.3.6.1.4.1.1139.1.3.2.1.15 |
| The last used event id (symmEventId). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| agentRevision |
1.3.6.1.4.1.1139.1.4.1 |
| The current revision of the agent software
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| agentType |
1.3.6.1.4.1.1139.1.4.3 |
| Integer value indicating the agent host environment,
so polling applications can adjust accordingly |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(0), unix-host(1), mainframe(2), nt-host(3) |
|
| periodicDiscoveryFrequency |
1.3.6.1.4.1.1139.1.4.4 |
| Indicates how often the Discovery thread should
rebuild the table of attached Symmetrixes, adding new
ones, and removing old ones. Any changes between the new
table and the previous table will generate a trap (Trap 4)
to all registered trap clients.
Initialize at startup from a separate 'config' file.
Recommended default is 3600 seconds (1 hour). A value less than 60
will disable the thread. Minimum frequency is 60 seconds. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| checksumTestFrequency |
1.3.6.1.4.1.1139.1.4.5 |
| Indicates how often the Checksum thread should
test for any changes between the current and previous
checksum value for all discovered Symmetrixes.
For each checksum change, a trap will be generated (Trap 5)
to all registered trap clients.
Initialize at startup from a separate 'config' file.
Recommended default is 60 seconds (1 minute). A value less than 60
will disable the thread. Minimum frequency is 60 seconds. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| statusCheckFrequency |
1.3.6.1.4.1.1139.1.4.6 |
| Indicates how often the Status thread should
gather all status and error data from all discovered Symmetrixes.
For each director or device error condition, a trap will be
generated (Trap 1 or 2) to all registered trap clients.
Initialize at startup from a separate 'config' file.
Recommended default is 60 seconds (1 minute). A value less than 60
will disable the thread. Minimum frequency is 60 seconds. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| discoveryChangeTime |
1.3.6.1.4.1.1139.1.4.302 |
| Indicates the last time the discovery table was last change by
the agent.
The value is in seconds, as returned by the standard 'C'
function time().
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| clientListMaintenanceFrequency |
1.3.6.1.4.1.1139.1.4.1001.1 |
| Indicates how often the Client List maintenance thread should
'wake up' to remove old requests and clients from the list
Initialize at startup from a separate 'config' file.
Recommended default is 15 minutes (1800 seconds). |
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| clientListRequestExpiration |
1.3.6.1.4.1.1139.1.4.1001.2 |
| Indicates how old a client request should be to consider
removing it from the Client List. It's assumed that a time
out condition occurred at the client, and the data is no longer
of any value, and deleted.
Initialize at startup from a separate 'config' file.
Recommended default is 15 minutes (900 seconds). |
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| clientListClientExpiration |
1.3.6.1.4.1.1139.1.4.1001.3 |
| Indicates how long a client can remain in the Client List without
make a request to the agent, after which point it is deleted from
the list. Clients are added to the list by making a request to the
agent.
Initialize at startup from a separate 'config' file.
Recommended default is 30 minutes (1800 seconds). |
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| discoveryTrapPort |
1.3.6.1.4.1.1139.1.4.1002.1 |
| Each client can set it's own port for receiving rediscovery
traps in the event the client cannot listen on port 162.
The agent will send any discovery table notifications to port
162, and, if set (i.e. >0), the clients designated port.
|
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| trapTestFrequency |
1.3.6.1.4.1.1139.1.4.1002.2 |
| Indicates how often the Trap Test thread should 'wake up'
to test for trap conditions in each attached Symmetrix.
Initialize at startup from a separate 'config' file.
Recommended default is 60 seconds. |
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| standardSNMPRequestPort |
1.3.6.1.4.1.1139.1.4.1003.1 |
| Indicates if the agent was able to bind to the standard SNMP
request port, port 161. Value of -1 indicates another SNMP
agent was already active on this host. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| esmSNMPRequestPort |
1.3.6.1.4.1.1139.1.4.1003.2 |
| Indicates what port the agent was able to bind to receive
SNMP requests for ESM data. This port can also be browsed
for all available MIB objects in the event the standard SNMP
port is unavailable, or the standard EMC.MIB is not loaded
into the host's SNMP agent. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| celerraTCPPort |
1.3.6.1.4.1.1139.1.4.1003.3 |
| Indicates what port the agent was able to bind to receive
TCP requests for ESM data from a Celerra Monitor.
Requests made to this port must conform to the internal proprietary
protocol established between a Celerra Monitor and the agent |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| xdrTCPPort |
1.3.6.1.4.1.1139.1.4.1003.4 |
| Indicates what port the agent was able to bind to receive
TCP requests for ESM data.
Requests made to this port must be XDR encoded and conform to
the command set established in the agent |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| esmVariablePacketSize |
1.3.6.1.4.1.1139.1.4.1004.1 |
| Agent's Maximum SNMP Packet Size for ESM Opaque variables.
Each client can set it's own preferred size with the
agent's internal client list.
Default size: 2000 bytes
|
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| discoveryFrequency |
1.3.6.1.4.1.1139.1.4.1004.2 |
| Indicates how often the Discovery thread should 'wake up'
to rebuild the table of attached Symmetrixes, adding new
ones, and removing old ones. Any changes between the new
table and the previous table will generate a trap to all
clients that had previously retrieved the discovery table.
Those clients will be prevented from retrieving any data
from the agent until they retrieve the new discovery table.
Initialize at startup from a separate 'config' file.
Recommended default is 600 seconds (10 minutes). |
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| masterTraceMessagesEnable |
1.3.6.1.4.1.1139.1.4.1004.3 |
| Turns trace messages on or off to the console.
0 = OFF
1 = ON |
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), on(1) |
|
| analyzerTopFileSavePolicy |
1.3.6.1.4.1.1139.1.4.1000.1 |
| Indicates how long a *.top file can remain on disk before
being deleted. Value is in days.
Initialize at startup from a separate 'config' file.
Recommended default is 7 days. |
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| analyzerSpecialDurationLimit |
1.3.6.1.4.1.1139.1.4.1000.2 |
| This is a cap applied to 'special' analyzer collection
requests that have a duration that exceeds this amount.
Value is in hours.
Initialize at startup from a separate 'config' file.
Recommended default is 24 hours. |
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| analyzerFilesCountTable |
1.3.6.1.4.1.1139.1.4.1000.3.1 |
| A list of the number of analyzer file present for the given
Symmetrix instance. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
AnaylzerFileCount |
|
| analyzerFileCountEntry |
1.3.6.1.4.1.1139.1.4.1000.3.1.1 |
| A file count entry containing objects for the specified Symmetrix |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AnaylzerFileCount |
|
|
| analyzerFileCount |
1.3.6.1.4.1.1139.1.4.1000.3.1.1.1 |
| The number of entries in the AnaylzerFileList table for the indicated
Symmetrix instance |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| analyzerFilesListTable |
1.3.6.1.4.1.1139.1.4.1000.3.2 |
| A list of the number of analyzer file present for the given
Symmetrix instance. The number of entries is given by the value
of analyzerFileCount. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
AnaylzerFileList |
|
| analyzerFilesListEntry |
1.3.6.1.4.1.1139.1.4.1000.3.2.1 |
| A file list entry containing objects for the specified Symmetrix |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AnaylzerFileList |
|
|
| analyzerFileName |
1.3.6.1.4.1.1139.1.4.1000.3.2.1.1 |
| The analyzer file name for the indicated instance |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| analyzerFileSize |
1.3.6.1.4.1.1139.1.4.1000.3.2.1.2 |
| The analyzer file size for the indicated instances, in bytes |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| analyzerFileCreation |
1.3.6.1.4.1.1139.1.4.1000.3.2.1.3 |
| The analyzer file creation time for the indicated instance |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| analyzerFileIsActive |
1.3.6.1.4.1.1139.1.4.1000.3.2.1.5 |
| Indicates if the analyzer collector is collection and storing
Symmetrix information into this file. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
inactive(0), active(1) |
|
| analyzerFileRuntime |
1.3.6.1.4.1.1139.1.4.1000.3.2.1.6 |
| The length of time this file has run, or has been
running for. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| subagentInfo |
1.3.6.1.4.1.1139.1.4.1005.1.1 |
| An entry containing objects for a particular Symmetrix subagent. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SubagentInfo |
|
|
| subagentProcessActive |
1.3.6.1.4.1.1139.1.4.1005.1.1.2 |
| The subagent process is running for this symmetrix.
0 = False
1 = True |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
false(0), true(1) |
|
| subagentTraceMessagesEnable |
1.3.6.1.4.1.1139.1.4.1005.1.1.3 |
| Turns trace messages on or off to the console.
0 = OFF
1 = ON |
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), on(1) |
|
| mainframeDiskInformation |
1.3.6.1.4.1.1139.1.5.1 |
| This table of mainframe specific disk variables for each
attached Symmetrix. The number of entries is given by the
value of discoveryTableSize. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
MainframeDiskInformation |
|
| emcSymMvsVolume |
1.3.6.1.4.1.1139.1.5.1.1.1 |
| Specific mainframe information for each disk of
this attached Symmetrix. Supported ONLY in agents
running in an MVS environment. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| mainframeDataSetInformation |
1.3.6.1.4.1.1139.1.5.2 |
| This table of mainframe specific data set for each
attached Symmetrix. The number of entries is given by the
value of discoveryTableSize. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
MainframeDataSetInformation |
|
| emcSymMvsLUNNumber |
1.3.6.1.4.1.1139.1.5.2.1.1 |
| The LUN number for this data set
|
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| emcSymMvsDsname |
1.3.6.1.4.1.1139.1.5.2.1.2 |
| Specific mainframe information for each LUN of
this attached Symmetrix. Supported ONLY in agents
running in an MVS environment. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Opaque |
|
|
| emcSymMvsBuildStatus |
1.3.6.1.4.1.1139.1.5.2.1.3 |
| Polled value to indicate the state of the data set list.
0 = data set unavailable
1 = build process initiated
2 = build in progress
3 = data set available
|
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| symListCount |
1.3.6.1.4.1.1139.1.6.1.1.1 |
| The number of entries in symListTable, representing the number
of Symmetrixes present on this system. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| symListTable |
1.3.6.1.4.1.1139.1.6.1.1.2 |
| A list of attached Symmetrix serial numbers. The number of
entries is given by the value of symListCount. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymList |
|
| symListEntry |
1.3.6.1.4.1.1139.1.6.1.1.2.1 |
| An entry containing objects for the indicated symListTable element. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymList |
|
|
| serialNumber |
1.3.6.1.4.1.1139.1.6.1.1.2.1.1 |
| The Symmetrix serial number for the indicated instance |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| symRemoteListCount |
1.3.6.1.4.1.1139.1.6.1.2.1 |
| The number of entries in symRemoteListTable, representing the number
of remote Symmetrixes present on this system. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| symRemoteListTable |
1.3.6.1.4.1.1139.1.6.1.2.2 |
| A list of remote Symmetrix serial numbers. The number of
entries is given by the value of symRemoteListCount. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymRemoteList |
|
| symRemoteListEntry |
1.3.6.1.4.1.1139.1.6.1.2.2.2 |
| An entry containing objects for the indicated symRemoteListTable element. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymRemoteList |
|
|
| remoteSerialNumber |
1.3.6.1.4.1.1139.1.6.1.2.2.2.1 |
| The remote Symmetrix serial number for the indicated instance |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| symDevListCountTable |
1.3.6.1.4.1.1139.1.6.1.3.1 |
| A list of the number of Symmetrix devices for the given
Symmetrix instance. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymDevListCount |
|
| symDevListCountEntry |
1.3.6.1.4.1.1139.1.6.1.3.1.1 |
| An entry containing objects for the number of Symmetrix
device names found for the specified Symmetrix |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymDevListCount |
|
|
| symDevListCount |
1.3.6.1.4.1.1139.1.6.1.3.1.1.1 |
| The number of entries in the SymDevList table for the indicated
Symmetrix instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| symDevListTable |
1.3.6.1.4.1.1139.1.6.1.3.2 |
| A list of Symmetrix device names found for the indicated Symmetrix instance.
The number of entries is given by the value of symDevListCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymDevList |
|
| symDevListEntry |
1.3.6.1.4.1.1139.1.6.1.3.2.1 |
| An entry containing objects for the indicated symDevListTable element. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymDevList |
|
|
| symDeviceName |
1.3.6.1.4.1.1139.1.6.1.3.2.1.1 |
| The device name for the indicated instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| symPDevListCountTable |
1.3.6.1.4.1.1139.1.6.1.4.1 |
| A list of the number of available devices for the given
Symmetrix instance. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymPDevCount |
|
| symPDevListCountEntry |
1.3.6.1.4.1.1139.1.6.1.4.1.1 |
| An entry containing objects for the number of available
devices found for the specified Symmetrix |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymPDevCount |
|
|
| symPDevListCount |
1.3.6.1.4.1.1139.1.6.1.4.1.1.1 |
| The number of entries in the symPDeviceList table for the indicated
Symmetrix instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| symPDevListTable |
1.3.6.1.4.1.1139.1.6.1.4.2 |
| A list of host device filenames (pdevs) for all available devices
for the indicated Symmetrix instance.
The number of entries is given by the value of symPDevListCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymPDevList |
|
| symPDevListEntry |
1.3.6.1.4.1.1139.1.6.1.4.2.1 |
| An entry containing objects for the indicated symPDevListTable element. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymPDevList |
|
|
| symPDeviceName |
1.3.6.1.4.1.1139.1.6.1.4.2.1.1 |
| The physical device name for the indicated instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| symPDevNoDgListCountTable |
1.3.6.1.4.1.1139.1.6.1.5.1 |
| A list of the number of Symmetrix devices that are not members of
a device group for the given Symmetrix instance. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymPDevNoDgCount |
|
| symPDevNoDgListCountEntry |
1.3.6.1.4.1.1139.1.6.1.5.1.1 |
| An entry containing objects for the number of Symmetrix devices that
are not members of a device group for the specified Symmetrix |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymPDevNoDgCount |
|
|
| symPDevNoDgListCount |
1.3.6.1.4.1.1139.1.6.1.5.1.1.1 |
| The number of entries in the symPDeviceNoDgList table for the indicated
Symmetrix instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| symPDevNoDgListTable |
1.3.6.1.4.1.1139.1.6.1.5.2 |
| A list of all Symmetrix devices that are not members of a device group
found for the indicated Symmetrix instance.
The number of entries is given by the value of symPDevNoDgListCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymPDevNoDgList |
|
| symPDevNoDgListEntry |
1.3.6.1.4.1.1139.1.6.1.5.2.1 |
| An entry containing objects for the indicated symPDevNoDgListTable element. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymPDevNoDgList |
|
|
| symDevNoDgListCountTable |
1.3.6.1.4.1.1139.1.6.1.6.1 |
| A list of the number of Symmetrix devices, that are not members
of a device group for the given Symmetrix instance. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymDevNoDgListCount |
|
| symDevNoDgListCountEntry |
1.3.6.1.4.1.1139.1.6.1.6.1.1 |
| An entry containing objects for the number of Symmetrix device names
found for the specified Symmetrix |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymDevNoDgListCount |
|
|
| symDevNoDgListCount |
1.3.6.1.4.1.1139.1.6.1.6.1.1.1 |
| The number of entries in the symDeviceNoDgList table for the indicated
Symmetrix instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| symDevNoDgListTable |
1.3.6.1.4.1.1139.1.6.1.6.2 |
| A list of Symmetrix device names found for the specified Symmetrix. The
number of entries is given by the value of symDevNoDgListCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymDevNoDgList |
|
| symDevNoDgListEntry |
1.3.6.1.4.1.1139.1.6.1.6.2.1 |
| An entry containing objects for the indicated symDevNoDgListTable element. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymDevNoDgList |
|
|
| symDgListCount |
1.3.6.1.4.1.1139.1.6.1.7.1 |
| The number of entries in symDgListTable, representing the number
of device groups present on this system. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| symDgListTable |
1.3.6.1.4.1.1139.1.6.1.7.2 |
| A list of device groups present on the system. The
number of entries is given by the value of symDgListCount. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymDgList |
|
| symDgListEntry |
1.3.6.1.4.1.1139.1.6.1.7.2.1 |
| An entry containing objects for the indicated symDgListTable element. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymDgList |
|
|
| symDevGroupName |
1.3.6.1.4.1.1139.1.6.1.7.2.1.1 |
| The device groupname for the indicated instance |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| symLDevListCountTable |
1.3.6.1.4.1.1139.1.6.1.8.1 |
| A list of the number of devices in a specific device group. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymLDevListCount |
|
| symLDevListCountEntry |
1.3.6.1.4.1.1139.1.6.1.8.1.1 |
| An entry containing objects for the number of devices
in a specific device group |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymLDevListCount |
|
|
| symLDevListCount |
1.3.6.1.4.1.1139.1.6.1.8.1.1.1 |
| The number of entries in the SymLDevList table for the indicated
Symmetrix instance |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| symLDevListTable |
1.3.6.1.4.1.1139.1.6.1.8.2 |
| A list of devices in the specified device group. The
number of entries is given by the value of symLDevListCount. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymLDevList |
|
| symLDevListEntry |
1.3.6.1.4.1.1139.1.6.1.8.2.1 |
| An entry containing objects for the indicated symLDevListTable element. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymLDevList |
|
|
| lDeviceName |
1.3.6.1.4.1.1139.1.6.1.8.2.1.1 |
| The device name for the indicated instance |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| symGateListCountTable |
1.3.6.1.4.1.1139.1.6.1.9.1 |
| A list of the number of host physical device filenames that are
currently in the gatekeeper device list for the given
Symmetrix instance. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymGateListCount |
|
| symGateListCountEntry |
1.3.6.1.4.1.1139.1.6.1.9.1.1 |
| An entry containing objects for the number of host physical device
filenames that are currently in the gatekeeper device list for
the specified Symmetrix |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymGateListCount |
|
|
| symGateListCount |
1.3.6.1.4.1.1139.1.6.1.9.1.1.1 |
| The number of entries in the SymGateList table for the indicated
Symmetrix instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| symGateListTable |
1.3.6.1.4.1.1139.1.6.1.9.2 |
| A list of host physical device filenames that are
currently in the gatekeeper device list for the specified Symmetrix.
The number of entries is given by the value of symGateListCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymGateList |
|
| symGateListEntry |
1.3.6.1.4.1.1139.1.6.1.9.2.1 |
| An entry containing objects for the indicated symGateListTable element. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymGateList |
|
|
| gatekeeperDeviceName |
1.3.6.1.4.1.1139.1.6.1.9.2.1.1 |
| The gatekeeper device name for the indicated instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| symBcvDevListCountTable |
1.3.6.1.4.1.1139.1.6.1.10.1 |
| A list of the number of BCV devices for the given
Symmetrix instance. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymBcvDevListCount |
|
| symBcvDevListCountEntry |
1.3.6.1.4.1.1139.1.6.1.10.1.1 |
| An entry containing objects for the number of BCV devices for
the specified Symmetrix |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymBcvDevListCount |
|
|
| symBcvDevListCount |
1.3.6.1.4.1.1139.1.6.1.10.1.1.1 |
| The number of entries in the SymBcvDevList table for the indicated
Symmetrix instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| symBcvDevListTable |
1.3.6.1.4.1.1139.1.6.1.10.2 |
| A list of BCV devices for the specified Symmetrix.
The number of entries is given by the value of symBcvDevListCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymBcvDevList |
|
| symBcvDevListEntry |
1.3.6.1.4.1.1139.1.6.1.10.2.1 |
| An entry containing objects for the indicated symBcvDevListTable element. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymBcvDevList |
|
|
| bcvDeviceName |
1.3.6.1.4.1.1139.1.6.1.10.2.1.1 |
| The BCV device name for the indicated instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| symBcvPDevListCountTable |
1.3.6.1.4.1.1139.1.6.1.11.1 |
| A list of the number of all BCV devices that
are accessible by the host systems for the given
Symmetrix instance. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymBcvPDevListCount |
|
| symBcvPDevListCountEntry |
1.3.6.1.4.1.1139.1.6.1.11.1.1 |
| An entry containing objects for the number of all BCV devices that
are accessible by the host systems for the specified Symmetrix |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymBcvPDevListCount |
|
|
| symBcvPDevListCount |
1.3.6.1.4.1.1139.1.6.1.11.1.1.1 |
| The number of entries in the SymBcvDevList table for the indicated
Symmetrix instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| symBcvPDevListTable |
1.3.6.1.4.1.1139.1.6.1.11.2 |
| A list of all BCV devices tha are accessible by the host systems
for the specified Symmetrix.
The number of entries is given by the value of symBcvPDevListCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymBcvPDevList |
|
| symBcvPDevListEntry |
1.3.6.1.4.1.1139.1.6.1.11.2.1 |
| An entry containing objects for the indicated symBcvPDevListTable element. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymBcvPDevList |
|
|
| symBcvPDeviceName |
1.3.6.1.4.1.1139.1.6.1.11.2.1.1 |
| The BCV physical device name for the indicated instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| symShowConfiguration |
1.3.6.1.4.1.1139.1.6.2.1.1 |
| A table of Symmetrix configuration information for the indicated Symmetrix
instance.
The number of entries is given by the value of discIndex. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymShowConfiguration |
|
| symShowEntry |
1.3.6.1.4.1.1139.1.6.2.1.1.1 |
| An entry containing objects for the Symmetrix configuration
information for the specified Symmetrix |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymShowConfiguration |
|
|
| symShowSymid |
1.3.6.1.4.1.1139.1.6.2.1.1.1.1 |
| Symmetrix serial id |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| symShowSymmetrix-ident |
1.3.6.1.4.1.1139.1.6.2.1.1.1.2 |
| Symmetrix generation; Symm3 or Symm4. (reserved for EMC use only.) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| symShowDb-sync-time |
1.3.6.1.4.1.1139.1.6.2.1.1.1.11 |
| Time since the configuration information was gathered |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| symShowDb-sync-bcv-time |
1.3.6.1.4.1.1139.1.6.2.1.1.1.12 |
| Time since the configuration information was gathered for BCVs |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| symShowDb-sync-rdf-time |
1.3.6.1.4.1.1139.1.6.2.1.1.1.13 |
| Time since the configuration information was gathered for the SRDF |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| symShowCache-size |
1.3.6.1.4.1.1139.1.6.2.1.1.1.17 |
| Cache size in megabytes |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symShowMax-wr-pend-slots |
1.3.6.1.4.1.1139.1.6.2.1.1.1.19 |
| Number of write pending slots allowed before starting
delayed fast writes |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symShowMax-da-wr-pend-slots |
1.3.6.1.4.1.1139.1.6.2.1.1.1.20 |
| Number of write pending slots allowed for one DA before delayed
fast writes |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symShowMax-dev-wr-pend-slots |
1.3.6.1.4.1.1139.1.6.2.1.1.1.21 |
| Number of write pending slots allowed for one device before starting
delayed fast writes |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symShowNum-disks |
1.3.6.1.4.1.1139.1.6.2.1.1.1.23 |
| Number of physical disks in Symmetrix |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symShowNum-symdevs |
1.3.6.1.4.1.1139.1.6.2.1.1.1.24 |
| Number of Symmetrix devices |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symShowNum-pdevs |
1.3.6.1.4.1.1139.1.6.2.1.1.1.25 |
| Number of host physical devices configured for this Symmetrix |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symShowSDDF-configuration |
1.3.6.1.4.1.1139.1.6.2.1.1.1.27 |
| The configuration state of the Symmetrix Differential Data Facility (SDDF).
Possible states are:
enabled(0),
disabled(1),
mixed(2) - This state is set when the RDF modes of the devices
in the group are different from each other
state-na(3) - state not applicable
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StateValues |
|
|
| symShowConfig-checksum |
1.3.6.1.4.1.1139.1.6.2.1.1.1.28 |
| Checksum of the Microcode file |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symShowNum-powerpath-devs |
1.3.6.1.4.1.1139.1.6.2.1.1.1.29 |
| Number of Symmetrix devices accessible through the PowerPath driver. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symShowPDevCountTable |
1.3.6.1.4.1.1139.1.6.2.1.2 |
| A list of the number of available devices for the given
Symmetrix instance. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymShowPDevCount |
|
| symShowPDevCountEntry |
1.3.6.1.4.1.1139.1.6.2.1.2.1 |
| An entry containing objects for the number of available
devices found for the specified Symmetrix |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymShowPDevCount |
|
|
| symShowPDevCount |
1.3.6.1.4.1.1139.1.6.2.1.2.1.1 |
| The number of entries in the SymShowPDeviceList table for the indicated
Symmetrix instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| symShowPDevListTable |
1.3.6.1.4.1.1139.1.6.2.1.3 |
| A list of host device filenames (pdevs) for all available devices
for the indicated Symmetrix instance.
The number of entries is given by the value of symShowPDevCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymShowPDevList |
|
| symShowPDevListEntry |
1.3.6.1.4.1.1139.1.6.2.1.3.1 |
| An entry containing objects for the indicated symShowPDevListTable element. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymShowPDevList |
|
|
| symShowPDeviceName |
1.3.6.1.4.1.1139.1.6.2.1.3.1.1 |
| The physical device name for the indicated instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| symShowDirectorCountEntry |
1.3.6.1.4.1.1139.1.6.2.1.4.1 |
| An entry containing objects for the number of directors
for the specified Symmetrix |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymShowDirectorCount |
|
|
| symShowDirectorCount |
1.3.6.1.4.1.1139.1.6.2.1.4.1.1 |
| The number of entries in the SymShowDirectorList table for the indicated
Symmetrix instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| symShowDirectorConfigurationTable |
1.3.6.1.4.1.1139.1.6.2.1.5 |
| A table of Symmetrix director configuration for the indicated Symmetrix
instance.
The number of entries is given by the value of symShowDirectorCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymShowDirectors |
|
| symShowDirectorConfigurationEntry |
1.3.6.1.4.1.1139.1.6.2.1.5.1 |
| An entry containing objects for the indicated
symShowDirectorConfigurationTable element. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymShowDirectors |
|
|
| symShowDirector-type |
1.3.6.1.4.1.1139.1.6.2.1.5.1.1 |
| Defines the type of director. Possible types are:
SYMAPI_DIRTYPE_FIBRECHANNEL
SYMAPI_DIRTYPE_SCSI
SYMAPI_DIRTYPE_DISK
SYMAPI_DIRTYPE_CHANNEL
SYMAPI_DIRTYPE_MEMORY
SYMAPI_DIRTYPE_R1
SYMAPI_DIRTYPE_R2
SYMAPI_DIRTYPE_RDF_B (bidirectional RDF) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DirectorType |
|
|
| symShowDirector-num |
1.3.6.1.4.1.1139.1.6.2.1.5.1.2 |
| Number of a director (1 - 32) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symShowSlot-num |
1.3.6.1.4.1.1139.1.6.2.1.5.1.3 |
| Slot number of a director (1 - 16) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symShowDirector-status |
1.3.6.1.4.1.1139.1.6.2.1.5.1.5 |
| online(0) - The director's status is ONLINE.
offline(1) - The director's status is OFFLINE.
dead(2) - The status is non-operational, and its LED
display will show 'DD'.
unknown(3) - The director's status is unknown.
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DirectorStatus |
|
|
| symShowScsi-capability |
1.3.6.1.4.1.1139.1.6.2.1.5.1.6 |
| Defines SCSI features for SAs and DAs. Possible values are:
SYMAPI_C_SCSI_NARROW
SYMAPI_C_SCSI_WIDE
SYMAPI_C_SCSI_ULTRA |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
SCSIWidth |
|
|
| symShowNum-da-volumes |
1.3.6.1.4.1.1139.1.6.2.1.5.1.7 |
| Indicates how many volumes are serviced by the DA. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symShowRemote-symid |
1.3.6.1.4.1.1139.1.6.2.1.5.1.8 |
| If this is an RA in an SRDF system,this is the remote Symmetrix
serial number. If this is not an RDF director, this field is NULL |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| symShowRa-group-num |
1.3.6.1.4.1.1139.1.6.2.1.5.1.9 |
| If this is an RA in an SRDF system, this is the RA group number;
otherwise it is zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symShowRemote-ra-group-num |
1.3.6.1.4.1.1139.1.6.2.1.5.1.10 |
| If this is an RA in an SRDF system, this is the RA group number
on the remote Symmetrix; otherwise it is zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symShowPrevent-auto-link-recovery |
1.3.6.1.4.1.1139.1.6.2.1.5.1.11 |
| Prevent the automatic resumption of data copy across the RDF
links as soon as the links have recovered.
Possible states are:
enabled(0),
disabled(1),
mixed(2) - This state is set when the RDF modes of the devices
in the group are different from each other
state-na(3) - state not applicable
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StateValues |
|
|
| symShowPrevent-ra-online-upon-pwron |
1.3.6.1.4.1.1139.1.6.2.1.5.1.12 |
| Prevent RA's from coming online after the Symmetrix is powered on.
Possible states are:
enabled(0),
disabled(1),
mixed(2) - This state is set when the RDF modes of the devices
in the group are different from each other
state-na(3) - state not applicable
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StateValues |
|
|
| symShowNum-ports |
1.3.6.1.4.1.1139.1.6.2.1.5.1.13 |
| Number of ports available on this director. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symShowPort0-status |
1.3.6.1.4.1.1139.1.6.2.1.5.1.14 |
| The status of port 0 for this director.
Possible values are:
status-na(0) - the port's status is not applicable.
on(1) - the port's status is on.
off(2) - the port's status is off.
wd(3) - the port's status is write disabled.
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PortStatus |
|
|
| symShowPort1-status |
1.3.6.1.4.1.1139.1.6.2.1.5.1.15 |
| The status of port 1 for this director.
Possible values are:
status-na(0) - the port's status is not applicable.
on(1) - the port's status is on.
off(2) - the port's status is off.
wd(3) - the port's status is write disabled.
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PortStatus |
|
|
| symShowPort2-status |
1.3.6.1.4.1.1139.1.6.2.1.5.1.16 |
| The status of port 2 for this director.
Possible values are:
status-na(0) - the port's status is not applicable.
on(1) - the port's status is on.
off(2) - the port's status is off.
wd(3) - the port's status is write disabled.
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PortStatus |
|
|
| symShowPort3-status |
1.3.6.1.4.1.1139.1.6.2.1.5.1.17 |
| The status of port 3 for this director.
Possible values are:
status-na(0) - the port's status is not applicable.
on(1) - the port's status is on.
off(2) - the port's status is off.
wd(3) - the port's status is write disabled.
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PortStatus |
|
|
| devShowConfigurationTable |
1.3.6.1.4.1.1139.1.6.2.2.1 |
| A table of Symmetrix device configuration information for the
indicated Symmetrix and device instance.
The number of entries is given by the value of symDevListCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymDeviceConfiguration |
|
| devShowConfigurationEntry |
1.3.6.1.4.1.1139.1.6.2.2.1.1 |
| An entry containing objects for the Symmetrix device configuration
information for the specified Symmetrix and device. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymDeviceConfiguration |
|
|
| devShowProduct-rev |
1.3.6.1.4.1.1139.1.6.2.2.1.1.3 |
| Product revision level of the Symmetrix device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| devShowSymid |
1.3.6.1.4.1.1139.1.6.2.2.1.1.4 |
| Symmetrix serial number |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| devShowPdevname |
1.3.6.1.4.1.1139.1.6.2.2.1.1.7 |
| Physical device name. If not visible to the host this field is NULL |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| devShowDgname |
1.3.6.1.4.1.1139.1.6.2.2.1.1.8 |
| Name of device group. If the device is not a member of a device group,
this field is NULL |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| devShowLdevname |
1.3.6.1.4.1.1139.1.6.2.2.1.1.9 |
| Name of this device in the device group. If the device is not a member
of a device group, this field is NULL |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| devShowDev-config |
1.3.6.1.4.1.1139.1.6.2.2.1.1.10 |
| unprotected(0) - no data protection method applied
mirror-2(1) - device is a two-way mirror
mirror-3(2) - device is a three-way mirror
mirror-4(3) - device is a four-way mirror
raid-s(4) - device is a standard raid-s device
raid-s-mirror(5) - device is a raid-s device plus a local mirror
rdf-r1(6) - device is an SRDF Master (R1)
rdf-r2(7) - device is an SRDF Slave (R2)
rdf-r1-raid-s(8) - device is an SRDF Master (R1) with RAID_S
rdf-r2-raid-s(9) - device is an SRDF Slave (R2) with RAID_S
rdf-r1-mirror(10) - device is an SRDF source (R1) with a local mirror
rdf-r2-mirror(11) - device is an SRDF target (R2) with mirror
bcv(12) - device is a BCV device
hot-spare(13) - device is a Hot Spare device
bcv-mirror-2(14) - device is a protected BCV device with mirror
bcv-rdf-r1(15) - device is an SRDF Master (R1), BCV device
bcv-rdf-r1-mirror(16) - device is an SRDF Master (R1), BCV device with mirror
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unprotected(0), mirror-2(1), mirror-3(2), mirror-4(3), raid-s(4), raid-s-mirror(5), rdf-r1(6), rdf-r2(7), rdf-r1-raid-s(8), rdf-r2-raid-s(9), rdf-r1-mirror(10), rdf-r2-mirror(11), bcv(12), hot-spare(13), bcv-mirror-2(14), bcv-rdf-r1(15), bcv-rdf-r1-mirror(16) |
|
| devShowDev-parameters |
1.3.6.1.4.1.1139.1.6.2.2.1.1.11 |
| ckd-device(1) - device is an 'Count Key Data' (CKD) device
gatekeeper-device(2) - device is a gatekeeper device
associated-device(4) - BCV or Gatekeeper device,associated with a group
multi-channel-device(8) - device visible by the host over more than one SCSI-bus
meta-head-device(16) - device is a META head device
meta-member-device(32) - device is a META member device
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ckd-device(1), gatekeeper-device(2), associated-device(4), multi-channel-device(8), meta-head-device(16), meta-member-device(32) |
|
| devShowDev-status |
1.3.6.1.4.1.1139.1.6.2.2.1.1.12 |
| ready(0) - the device is ready
not-ready(1) - the device is not ready
write-disabled - the device is write disabled
not-applicable(3) - there is no such device
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceStatus |
|
|
| devShowDev-capacity |
1.3.6.1.4.1.1139.1.6.2.2.1.1.13 |
| Device capacity specified as the number of device blocks |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devShowTid |
1.3.6.1.4.1.1139.1.6.2.2.1.1.14 |
| SCSI target ID of the Symmetrix device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devShowLun |
1.3.6.1.4.1.1139.1.6.2.2.1.1.15 |
| SCSI logical unit number of the Symmetrix device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devShowDirector-num |
1.3.6.1.4.1.1139.1.6.2.2.1.1.16 |
| Symmetrix director number of the device's FW SCSI Channel director,
or SA, (1-32). If there is no primary port, it is zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| devShowDirector-slot-num |
1.3.6.1.4.1.1139.1.6.2.2.1.1.17 |
| The slot number of the director. If there is no primary port,
it is zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| devShowDirector-ident |
1.3.6.1.4.1.1139.1.6.2.2.1.1.18 |
| The identification number of the director, for example: SA-16.
If there is no primary port, this field is NULL |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| devShowDirector-port-num |
1.3.6.1.4.1.1139.1.6.2.2.1.1.19 |
| The device's SA port number (0-3). If there is no primary port,
it is zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| devShowMset-M1-type |
1.3.6.1.4.1.1139.1.6.2.2.1.1.20 |
| Device type of each hyper volume forming a Symmetrix mirror set.
not-applicable(1) - No device exists for this mirror
local-data(2) - This device is a local data device
raid-s(4) - This device is a local raid-s data device
raid-s-parity(8) - This device is a local raid_s parity device
remote-r1-data(16) - This device is a remote R1 data device
remote-r2-data(32) - This device is a remote R2 data device
hot-spare(128) - This device is a hot spare device
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceType |
|
|
| devShowMset-M2-type |
1.3.6.1.4.1.1139.1.6.2.2.1.1.21 |
| Device type of each hyper volume forming a Symmetrix mirror set.
not-applicable(1) - No device exists for this mirror
local-data(2) - This device is a local data device
raid-s(4) - This device is a local raid-s data device
raid-s-parity(8) - This device is a local raid_s parity device
remote-r1-data(16) - This device is a remote R1 data device
remote-r2-data(32) - This device is a remote R2 data device
hot-spare(128) - This device is a hot spare device
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceType |
|
|
| devShowMset-M3-type |
1.3.6.1.4.1.1139.1.6.2.2.1.1.22 |
| Device type of each hyper volume forming a Symmetrix mirror set.
not-applicable(1) - No device exists for this mirror
local-data(2) - This device is a local data device
raid-s(4) - This device is a local raid-s data device
raid-s-parity(8) - This device is a local raid_s parity device
remote-r1-data(16) - This device is a remote R1 data device
remote-r2-data(32) - This device is a remote R2 data device
hot-spare(128) - This device is a hot spare device
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceType |
|
|
| devShowMset-M4-type |
1.3.6.1.4.1.1139.1.6.2.2.1.1.23 |
| Device type of each hyper volume forming a Symmetrix mirror set.
not-applicable(1) - No device exists for this mirror
local-data(2) - This device is a local data device
raid-s(4) - This device is a local raid-s data device
raid-s-parity(8) - This device is a local raid_s parity device
remote-r1-data(16) - This device is a remote R1 data device
remote-r2-data(32) - This device is a remote R2 data device
hot-spare(128) - This device is a hot spare device
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceType |
|
|
| devShowMset-M1-status |
1.3.6.1.4.1.1139.1.6.2.2.1.1.24 |
| ready(0) - the device is ready
not-ready(1) - the device is not ready
write-disabled - the device is write disabled
not-applicable(3) - there is no such device
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceStatus |
|
|
| devShowMset-M2-status |
1.3.6.1.4.1.1139.1.6.2.2.1.1.25 |
| ready(0) - the device is ready
not-ready(1) - the device is not ready
write-disabled - the device is write disabled
not-applicable(3) - there is no such device
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceStatus |
|
|
| devShowMset-M3-status |
1.3.6.1.4.1.1139.1.6.2.2.1.1.26 |
| ready(0) - the device is ready
not-ready(1) - the device is not ready
write-disabled - the device is write disabled
not-applicable(3) - there is no such device
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceStatus |
|
|
| devShowMset-M4-status |
1.3.6.1.4.1.1139.1.6.2.2.1.1.27 |
| ready(0) - the device is ready
not-ready(1) - the device is not ready
write-disabled - the device is write disabled
not-applicable(3) - there is no such device
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceStatus |
|
|
| devShowMset-M1-invalid-tracks |
1.3.6.1.4.1.1139.1.6.2.2.1.1.28 |
| The number of invalid tracks for Mirror 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| devShowMset-M2-invalid-tracks |
1.3.6.1.4.1.1139.1.6.2.2.1.1.29 |
| The number of invalid tracks for Mirror 2 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| devShowMset-M3-invalid-tracks |
1.3.6.1.4.1.1139.1.6.2.2.1.1.30 |
| The number of invalid tracks for Mirror 3 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| devShowMset-M4-invalid-tracks |
1.3.6.1.4.1.1139.1.6.2.2.1.1.31 |
| The number of invalid tracks for Mirror 4 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| devShowDirector-port-status |
1.3.6.1.4.1.1139.1.6.2.2.1.1.48 |
| ready(0) - the device is ready
not-ready(1) - the device is not ready
write-disabled - the device is write disabled
not-applicable(3) - there is no such device
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceStatus |
|
|
| devShowDev-sa-status |
1.3.6.1.4.1.1139.1.6.2.2.1.1.49 |
| ready(0) - the device is ready
not-ready(1) - the device is not ready
write-disabled - the device is write disabled
not-applicable(3) - there is no such device
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceStatus |
|
|
| devShowVbus |
1.3.6.1.4.1.1139.1.6.2.2.1.1.50 |
| The virtual busis used for fibre channel ports.
For EA and CA ports, this is the device address. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| devShowEmulation |
1.3.6.1.4.1.1139.1.6.2.2.1.1.51 |
| emulation-na(0) - the emulation type for this device is not available.
fba(1) - the emulation type for this device is fba.
as400(2) - the emulation type for this device is as/400.
icl(3) - the emulation type for this device is icl.
unisys-fba(4) - the emulation type for this device is unisys fba.
ckd-3380(5) - the emulation type for this device is ckd 3380.
ckd-3390(6) - the emulation type for this device is ckd 3390.
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceEmulation |
|
|
| devShowDev-block-size |
1.3.6.1.4.1.1139.1.6.2.2.1.1.52 |
| Indicates the number of bytes per block |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devShowSCSI-negotiation |
1.3.6.1.4.1.1139.1.6.2.2.1.1.53 |
| width-na(0) - width not available
narrow(1),
wide(2),
ultra(3)
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
SCSIWidth |
|
|
| devShowSCSI-method |
1.3.6.1.4.1.1139.1.6.2.2.1.1.54 |
| method-na(0) - method not available
synchronous(1)
asynchronous(2)
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
SCSIMethod |
|
|
| devShowDev-cylinders |
1.3.6.1.4.1.1139.1.6.2.2.1.1.55 |
| Number device cylinders |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devShowAttached-bcv-symdev |
1.3.6.1.4.1.1139.1.6.2.2.1.1.56 |
| If this is a std device, this may be set to indicate the preferred
BCV device to which this device would be paired. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| devShowRDFInfoTable |
1.3.6.1.4.1.1139.1.6.2.2.2 |
| A table of Symmetrix RDF device configuration information for the
indicated Symmetrix and device instance.
The number of entries is given by the value of symDevListCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
RDFInfo |
|
| devShowRDFInfoEntry |
1.3.6.1.4.1.1139.1.6.2.2.2.1 |
| An entry containing objects for the Symmetrix RDF device configuration
information for the specified Symmetrix and device. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
RDFInfo |
|
|
| devShowRemote-symid |
1.3.6.1.4.1.1139.1.6.2.2.2.1.1 |
| Serial number of the Symmetrix containing the target (R2) volume |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| devShowRa-group-number |
1.3.6.1.4.1.1139.1.6.2.2.2.1.3 |
| The RA group number (1 - n) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| devShowDev-rdf-type |
1.3.6.1.4.1.1139.1.6.2.2.2.1.4 |
| Type of RDF device. Values are:
r1(0) - an R1 device
r2(1) - an R2 device
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RDFType |
|
|
| devShowDev-ra-status |
1.3.6.1.4.1.1139.1.6.2.2.2.1.5 |
| The status of the remote device. Values are:
ready(0)
not-ready(1)
write-disabled(2)
not-applicable(3)
mixed(4)
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceStatus |
|
|
| devShowDev-link-status |
1.3.6.1.4.1.1139.1.6.2.2.2.1.6 |
| The RDF link status. Values are:
ready(0)
not-ready(1)
write-disabled(2)
not-applicable(3)
mixed(4)
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceStatus |
|
|
| devShowRdf-mode |
1.3.6.1.4.1.1139.1.6.2.2.2.1.7 |
| The RDF Mode. Values are
synchronous(0)
semi_synchronous(1)
adaptive_copy(2)
mixed(3) - This state is set when the RDF modes of the devices
in the group are different from each other
rdf_mode_na (4) - not applicable
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RDFMode |
|
|
| devShowRdf-pair-state |
1.3.6.1.4.1.1139.1.6.2.2.2.1.8 |
| The RDF pair state. Values are:
invalid(100) - The device & link states are in an
unrecognized combination
syncinprog(101) - Synchronizing in progress
synchronized(102) - The source and target have identical data
split(103) - The source is split from the target, and the target
is write enabled.
suspended(104) - The link is suspended
failed-over(105) - The target is write enabled, the source is write
disabled, the link is suspended.
partitioned(106) - The communication link to the remote symmetrix
is down, and the device is write enabled.
r1-updated(107) - The target is write enabled, the source is write
disabled, and the link is up.
r1-updinprog(108) - same as r1-updated but there are invalid tracks
between target and source
mixed(109) - This state is set when the RDF modes of the devices
in the group are different from each other
state-na(110) - Not applicable
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RDFPairState |
|
|
| devShowRdf-domino |
1.3.6.1.4.1.1139.1.6.2.2.2.1.9 |
| The RDF Domino state.
Possible states are:
enabled(0),
disabled(1),
mixed(2) - This state is set when the RDF modes of the devices
in the group are different from each other
state-na(3) - state not applicable
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StateValues |
|
|
| devShowAdaptive-copy |
1.3.6.1.4.1.1139.1.6.2.2.2.1.10 |
| Adaptive copy state. Values are:
disabled(0) - Adaptive Copy is Disabled
wp-mode(1) - Adaptive Copy Write Pending Mode
disk-mode(2) - Adaptive Copy Disk Mode
mixed(3) - This state is set when the RDF modes of the devices
in the group are different from each other
ac-na(4) - Not Applicable
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RDFAdaptiveCopy |
|
|
| devShowAdaptive-copy-skew |
1.3.6.1.4.1.1139.1.6.2.2.2.1.11 |
| Number of invalid tracks when in Adaptive copy mode.
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devShowDev-rdf-state |
1.3.6.1.4.1.1139.1.6.2.2.2.1.14 |
| The RDF state. Values are:
ready(0)
not-ready(1)
write-disabled(2)
not-applicable(3)
mixed(4)
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceStatus |
|
|
| devShowRemote-dev-rdf-state |
1.3.6.1.4.1.1139.1.6.2.2.2.1.15 |
| The RDF device state. Values are:
ready(0)
not-ready(1)
write-disabled(2)
not-applicable(3)
mixed(4)
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceStatus |
|
|
| devShowRdf-status |
1.3.6.1.4.1.1139.1.6.2.2.2.1.16 |
| The RDF status. Values are:
ready(0)
not-ready(1)
write-disabled(2)
not-applicable(3)
mixed(4)
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceStatus |
|
|
| devShowLink-domino |
1.3.6.1.4.1.1139.1.6.2.2.2.1.17 |
| The link domino state.
Possible states are:
enabled(0),
disabled(1),
mixed(2) - This state is set when the RDF modes of the devices
in the group are different from each other
state-na(3) - state not applicable
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StateValues |
|
|
| devShowPrevent-auto-link-recovery |
1.3.6.1.4.1.1139.1.6.2.2.2.1.18 |
| Prevent the automatic resumption of data copy across the RDF
links as soon as the links have recovered.
Possible states are:
enabled(0),
disabled(1),
mixed(2) - This state is set when the RDF modes of the devices
in the group are different from each other
state-na(3) - state not applicable
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StateValues |
|
|
| devShowLink-config |
1.3.6.1.4.1.1139.1.6.2.2.2.1.19 |
| The RDF link configuration: Values are:
escon(1),
t3(2),
na(3)
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RDFLinkConfig |
|
|
| devShowSuspend-state |
1.3.6.1.4.1.1139.1.6.2.2.2.1.20 |
| For R1 devices in a consistency group, will be set to OFFLINE or
OFFLINE_PENDING if a device in the group experiences a link failure.
Values are:
transient-state-na(1) - state not applicable
offline(2),
offline_pend(3),
online(4)
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RDDFTransientState |
|
|
| devShowConsistency-state |
1.3.6.1.4.1.1139.1.6.2.2.2.1.21 |
| Indicates if this R1 device is a member of any consistency group.
Possible states are:
enabled(0),
disabled(1),
mixed(2) - This state is set when the RDF modes of the devices
in the group are different from each other
state-na(3) - state not applicable
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StateValues |
|
|
| devShowAdaptive-copy-wp-state |
1.3.6.1.4.1.1139.1.6.2.2.2.1.22 |
| The Adaptive Copy Write Pending state.
Values are:
transient-state-na(1) - state not applicable
offline(2),
offline_pend(3),
online(4)
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RDDFTransientState |
|
|
| devShowPrevent-ra-online-upon-pwron |
1.3.6.1.4.1.1139.1.6.2.2.2.1.23 |
| Prevent RA's from coming online after the Symmetrix is powered on.
Possible states are:
enabled(0),
disabled(1),
mixed(2) - This state is set when the RDF modes of the devices
in the group are different from each other
state-na(3) - state not applicable
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StateValues |
|
|
| devShowBCVInfoTable |
1.3.6.1.4.1.1139.1.6.2.2.3 |
| A table of Symmetrix BCV device configuration information for the
indicated Symmetrix and device instance.
The number of entries is given by the value of symDevListCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
BCVInfo |
|
| devShowBCVInfoEntry |
1.3.6.1.4.1.1139.1.6.2.2.3.1 |
| An entry containing objects for the Symmetrix BCV device configuration
information for the specified Symmetrix and device. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
BCVInfo |
|
|
| devShowDev-serial-id |
1.3.6.1.4.1.1139.1.6.2.2.3.1.1 |
| Symmetrix device serial ID for the standard device in a BCV pair.
If the device is a:
BCV device in a BCV pair, this field is the serial ID of the
standard device with which the BCV is paired.
Standard device in a BCV pair, this field is the same as
device_serial_id in SYMAPI_DEVICE_T.
if the standard device that was never paired with a BCV device,
this field is NULL |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| devShowDev-sym-devname |
1.3.6.1.4.1.1139.1.6.2.2.3.1.2 |
| Symmetrix device name/number for the standard device in a BCV pair.
If the device is a:
BCV device in a BCV pair, this is the device name/number of the
standard device with which the BCV is paired.
Standard device in a BCV pair, this is the same as sym_devname
in SYMAPI_DEVICE_T.
If the standard device that was never paired with a BCV device,
this field is NULL |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| devShowDev-dgname |
1.3.6.1.4.1.1139.1.6.2.2.3.1.3 |
| Name of the device group that the standard device is a member.
If the standard device is not a member of a device group, this
field is NULL |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| devShowBcvdev-serial-id |
1.3.6.1.4.1.1139.1.6.2.2.3.1.4 |
| Symmetrix device serial ID for the BCV device in a BCV pair.
If the device is a:
BCV device in a BCV pair, this is the same as device_serial_id
in SYMAPI_DEVICE_T.
Standard device in a BCV pair, this is the serial ID of the
BCV device with which the standard device is paired.
If the BCV device that was never paired with a standard device,
this field is NULL |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| devShowBcvdev-sym-devname |
1.3.6.1.4.1.1139.1.6.2.2.3.1.5 |
| Symmetrix device name/number for the BCV device in a BCV pair.
If the device is a:
BCV device in a BCV pair, this is the same as sym_devname
in SYMAPI_DEVICE_T.
Standard device in a BCV pair, this is the device name/number
of the BCV device with which the standard device is paired.
If the BCV device was never paired with a standard device,
this field is NULL. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| devShowBcvdev-dgname |
1.3.6.1.4.1.1139.1.6.2.2.3.1.6 |
| Name of the device group that the BCV device is associated with.
If the BCV device is not associated with a device group,
this field is NULL |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| devShowBcv-pair-state |
1.3.6.1.4.1.1139.1.6.2.2.3.1.7 |
| never-established(0),
in-progress(1),
synchronous(2),
split-in-progress(3),
split-before-sync(4),
split(5),
split-no-incremental(6),
restore-in-progress(7),
restored(8),
split-before-restore(9),
invalid(10)
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
BCVState |
|
|
| devShowBcvdev-status |
1.3.6.1.4.1.1139.1.6.2.2.3.1.10 |
| The BCV Device status. Values are:
ready(0)
not-ready(1)
write-disabled(2)
not-applicable(3)
mixed(4)
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DeviceStatus |
|
|
| symStatTable |
1.3.6.1.4.1.1139.1.6.3.1 |
| A table of Symmetrix statistcs for the indicated Symmetrix
instance.
The number of entries is given by the value of discIndex. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymStatStatistics |
|
| symStatEntry |
1.3.6.1.4.1.1139.1.6.3.1.1 |
| An entry containing objects for the Symmetrix statistics
for the specified Symmetrix and device. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymStatStatistics |
|
|
| symstatTime-stamp |
1.3.6.1.4.1.1139.1.6.3.1.1.1 |
| Time since these statistics were last collected |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| symstatNum-rw-reqs |
1.3.6.1.4.1.1139.1.6.3.1.1.2 |
| Total number of all read and write requests on the
specified Symmetrix unit |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symstatNum-read-reqs |
1.3.6.1.4.1.1139.1.6.3.1.1.3 |
| Number of all read requests on the specified Symmetrix unit |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symstatNum-write-reqs |
1.3.6.1.4.1.1139.1.6.3.1.1.4 |
| Number of all write requests on the specified Symmetrix unit |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symstatNum-rw-hits |
1.3.6.1.4.1.1139.1.6.3.1.1.5 |
| Total number of all read and write cache hits for all devices
on the specified Symmetrix unit |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symstatNum-read-hits |
1.3.6.1.4.1.1139.1.6.3.1.1.6 |
| Total number of cache read hits for all devices on the
specified Symmetrix unit |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symstatNum-write-hits |
1.3.6.1.4.1.1139.1.6.3.1.1.7 |
| Total number of cache write hits for all devices on the
specified Symmetrix unit |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symstatNum-blocks-read |
1.3.6.1.4.1.1139.1.6.3.1.1.12 |
| Total number of (512 byte) blocks read for all devices on the
specified Symmetrix unit |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symstatNum-blocks-written |
1.3.6.1.4.1.1139.1.6.3.1.1.17 |
| Total number of (512 byte) blocks written for all devices on the
specified Symmetrix unit |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symstatNum-delayed-dfw |
1.3.6.1.4.1.1139.1.6.3.1.1.22 |
| Number of delayed deferred writes untils tracks are destaged.
(reserved for EMC use only.) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symstatNum-wr-pend-tracks |
1.3.6.1.4.1.1139.1.6.3.1.1.23 |
| Number of tracks waiting to be destaged from cache on to disk
for the specified Symmetrix unit |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symstatNum-sa-cdb-reqs |
1.3.6.1.4.1.1139.1.6.3.1.1.26 |
| Number of Command Descriptor Blocks (CDBs) sent to the Symmetrix unit.
(Reads, writes, and inquiries are the types of commands sent in the CDBs.) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symstatNum-sa-rw-reqs |
1.3.6.1.4.1.1139.1.6.3.1.1.27 |
| Total number of all read and write requests for all SCSI adapters (SAs)
on the specified Symmetrix unit |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symstatNum-sa-read-reqs |
1.3.6.1.4.1.1139.1.6.3.1.1.28 |
| Total number of all read requests for all SCSI adapters (SAs)
on the specified Symmetrix unit |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symstatNum-sa-write-reqs |
1.3.6.1.4.1.1139.1.6.3.1.1.29 |
| Total number of all write requests for all SCSI adapters (SAs)
on the specified Symmetrix unit |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symstatNum-sa-rw-hits |
1.3.6.1.4.1.1139.1.6.3.1.1.30 |
| Total number of all read and write cache hits for all SCSI
adapters (SAs) on the specified Symmetrix unit |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devStatTable |
1.3.6.1.4.1.1139.1.6.3.2 |
| A table of Symmetrix device statistics for the indicated
Symmetrix and device instance.
The number of entries is given by the value of symDevListCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DevStatStatistics |
|
| devStatEntry |
1.3.6.1.4.1.1139.1.6.3.2.1 |
| An entry containing objects for the Symmetrix device statistics
for the specified Symmetrix and device. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DevStatStatistics |
|
|
| devstatTime-stamp |
1.3.6.1.4.1.1139.1.6.3.2.1.1 |
| Time since these statistics were last collected |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| devstatNum-sym-timeslices |
1.3.6.1.4.1.1139.1.6.3.2.1.2 |
| Number of 1/2 seconds from reset until the Symmetrix internally
snapshots the director counters. You must use this field when
computing a rate. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devstatNum-rw-reqs |
1.3.6.1.4.1.1139.1.6.3.2.1.3 |
| Total number of I/Os for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devstatNum-read-reqs |
1.3.6.1.4.1.1139.1.6.3.2.1.4 |
| Total number of read requests for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devstatNum-write-reqs |
1.3.6.1.4.1.1139.1.6.3.2.1.5 |
| Total number of write requests for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devstatNum-rw-hits |
1.3.6.1.4.1.1139.1.6.3.2.1.6 |
| Total number of cache hits (read & write) for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devstatNum-read-hits |
1.3.6.1.4.1.1139.1.6.3.2.1.7 |
| Total number of cache read hits for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devstatNum-write-hits |
1.3.6.1.4.1.1139.1.6.3.2.1.8 |
| Total number of cache write hits for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devstatNum-blocks-read |
1.3.6.1.4.1.1139.1.6.3.2.1.13 |
| Total number of (512 byte) blocks read for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devstatNum-blocks-written |
1.3.6.1.4.1.1139.1.6.3.2.1.18 |
| Total number of (512 byte) blocks written for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devstatNum-seq-read-reqs |
1.3.6.1.4.1.1139.1.6.3.2.1.19 |
| Total number of number of sequential read reqs for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devstatNum-delayed-dfw |
1.3.6.1.4.1.1139.1.6.3.2.1.23 |
| Total number of delayed deferred writes until track destaged |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| devstatNum-wp-tracks |
1.3.6.1.4.1.1139.1.6.3.2.1.24 |
| Total number of write pending tracks for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| pDevStatTable |
1.3.6.1.4.1.1139.1.6.3.3 |
| A table of Symmetrix phisical device statistics for the indicated
Symmetrix and device instance.
The number of entries is given by the value of symPDevListCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PDevStatStatistics |
|
| pDevStatEntry |
1.3.6.1.4.1.1139.1.6.3.3.1 |
| An entry containing objects for the Symmetrix physical device
statistics for the specified Symmetrix and device. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PDevStatStatistics |
|
|
| pdevstatTime-stamp |
1.3.6.1.4.1.1139.1.6.3.3.1.1 |
| Time since these statistics were last collected |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| pdevstatNum-sym-timeslices |
1.3.6.1.4.1.1139.1.6.3.3.1.2 |
| Number of 1/2 seconds from reset until the Symmetrix internally
snapshots the director counters. You must use this field when
computing a rate. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| pdevstatNum-rw-reqs |
1.3.6.1.4.1.1139.1.6.3.3.1.3 |
| Total number of I/Os for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| pdevstatNum-read-reqs |
1.3.6.1.4.1.1139.1.6.3.3.1.4 |
| Total number of read requests for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| pdevstatNum-write-reqs |
1.3.6.1.4.1.1139.1.6.3.3.1.5 |
| Total number of write requests for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| pdevstatNum-rw-hits |
1.3.6.1.4.1.1139.1.6.3.3.1.6 |
| Total number of cache hits (read & write) for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| pdevstatNum-read-hits |
1.3.6.1.4.1.1139.1.6.3.3.1.7 |
| Total number of cache read hits for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| pdevstatNum-write-hits |
1.3.6.1.4.1.1139.1.6.3.3.1.8 |
| Total number of cache write hits for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| pdevstatNum-blocks-read |
1.3.6.1.4.1.1139.1.6.3.3.1.13 |
| Total number of (512 byte) blocks read for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| pdevstatNum-blocks-written |
1.3.6.1.4.1.1139.1.6.3.3.1.18 |
| Total number of (512 byte) blocks written for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| pdevstatNum-seq-read-reqs |
1.3.6.1.4.1.1139.1.6.3.3.1.19 |
| Total number of number of sequential read reqs for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| pdevstatNum-delayed-dfw |
1.3.6.1.4.1.1139.1.6.3.3.1.23 |
| Total number of delayed deferred writes until track destaged |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| pdevstatNum-wp-tracks |
1.3.6.1.4.1.1139.1.6.3.3.1.24 |
| Total number of write pending tracks for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| lDevStatTable |
1.3.6.1.4.1.1139.1.6.3.4 |
| A table of Symmetrix logical device statistics for the indicated
Symmetrix and device instance.
The number of entries is given by the value of symLDevListCount. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LDevStatStatistics |
|
| lDevStatEntry |
1.3.6.1.4.1.1139.1.6.3.4.1 |
| An entry containing objects for the Symmetrix logical device
statistics for the specified Symmetrix and device. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LDevStatStatistics |
|
|
| ldevstatTime-stamp |
1.3.6.1.4.1.1139.1.6.3.4.1.1 |
| Time since these statistics were last collected |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| ldevstatNum-sym-timeslices |
1.3.6.1.4.1.1139.1.6.3.4.1.2 |
| Number of 1/2 seconds from reset until the Symmetrix internally
snapshots the director counters. You must use this field when
computing a rate. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| ldevstatNum-rw-reqs |
1.3.6.1.4.1.1139.1.6.3.4.1.3 |
| Total number of I/Os for the device |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| ldevstatNum-read-reqs |
1.3.6.1.4.1.1139.1.6.3.4.1.4 |
| Total number of read requests for the device |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| ldevstatNum-write-reqs |
1.3.6.1.4.1.1139.1.6.3.4.1.5 |
| Total number of write requests for the device |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| ldevstatNum-rw-hits |
1.3.6.1.4.1.1139.1.6.3.4.1.6 |
| Total number of cache hits (read & write) for the device |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| ldevstatNum-read-hits |
1.3.6.1.4.1.1139.1.6.3.4.1.7 |
| Total number of cache read hits for the device |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| ldevstatNum-write-hits |
1.3.6.1.4.1.1139.1.6.3.4.1.8 |
| Total number of cache write hits for the device |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| ldevstatNum-blocks-read |
1.3.6.1.4.1.1139.1.6.3.4.1.13 |
| Total number of (512 byte) blocks read for the device |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| ldevstatNum-blocks-written |
1.3.6.1.4.1.1139.1.6.3.4.1.18 |
| Total number of (512 byte) blocks written for the device |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| ldevstatNum-seq-read-reqs |
1.3.6.1.4.1.1139.1.6.3.4.1.19 |
| Total number of number of sequential read reqs for the device |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| ldevstatNum-delayed-dfw |
1.3.6.1.4.1.1139.1.6.3.4.1.23 |
| Total number of delayed deferred writes until track destaged |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| ldevstatNum-wp-tracks |
1.3.6.1.4.1.1139.1.6.3.4.1.24 |
| Total number of write pending tracks for the device |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dgStatTable |
1.3.6.1.4.1.1139.1.6.3.5 |
| A table of Symmetrix device group statistics for the indicated
device group instance.
The number of entries is given by the value of symDgListCount. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DgStatStatistics |
|
| dgStatEntry |
1.3.6.1.4.1.1139.1.6.3.5.1 |
| An entry containing objects for the device group statistics
for the specified device group. |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DgStatStatistics |
|
|
| dgstatTime-stamp |
1.3.6.1.4.1.1139.1.6.3.5.1.1 |
| Time since these statistics were last collected |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| dgstatNum-sym-timeslices |
1.3.6.1.4.1.1139.1.6.3.5.1.2 |
| Number of 1/2 seconds from reset until the Symmetrix internally
snapshots the director counters. You must use this field when
computing a rate. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dgstatNum-rw-reqs |
1.3.6.1.4.1.1139.1.6.3.5.1.3 |
| Total number of I/Os for the device group |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dgstatNum-read-reqs |
1.3.6.1.4.1.1139.1.6.3.5.1.4 |
| Total number of read requests for the device group |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dgstatNum-write-reqs |
1.3.6.1.4.1.1139.1.6.3.5.1.5 |
| Total number of write requests for the device group |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dgstatNum-rw-hits |
1.3.6.1.4.1.1139.1.6.3.5.1.6 |
| Total number of cache hits (read & write) for the device group |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dgstatNum-read-hits |
1.3.6.1.4.1.1139.1.6.3.5.1.7 |
| Total number of cache read hits for the device group |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dgstatNum-write-hits |
1.3.6.1.4.1.1139.1.6.3.5.1.8 |
| Total number of cache write hits for the device group |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dgstatNum-blocks-read |
1.3.6.1.4.1.1139.1.6.3.5.1.13 |
| Total number of (512 byte) blocks read for the device group |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dgstatNum-blocks-written |
1.3.6.1.4.1.1139.1.6.3.5.1.18 |
| Total number of (512 byte) blocks written for the device group |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dgstatNum-seq-read-reqs |
1.3.6.1.4.1.1139.1.6.3.5.1.19 |
| Total number of number of sequential read reqs for the device group |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dgstatNum-prefetched-tracks |
1.3.6.1.4.1.1139.1.6.3.5.1.20 |
| Total number of prefetched tracks for the device group |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dgstatNum-destaged-tracks |
1.3.6.1.4.1.1139.1.6.3.5.1.21 |
| Total number of destaged tracks for the device group |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dgstatNum-deferred-writes |
1.3.6.1.4.1.1139.1.6.3.5.1.22 |
| Total number of deferred writes for the device group |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dgstatNum-delayed-dfw |
1.3.6.1.4.1.1139.1.6.3.5.1.23 |
| Total number of delayed deferred writes until track destaged |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dgstatNum-wp-tracks |
1.3.6.1.4.1.1139.1.6.3.5.1.24 |
| Total number of write pending tracks for the device group |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| directorStatTable |
1.3.6.1.4.1.1139.1.6.3.6 |
| A table of Symmetrix director statistics for the indicated
Symmetrix and director instance.
The number of entries is given by the value of symShowDirectorCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DirStatStatistics |
|
| directorStatEntry |
1.3.6.1.4.1.1139.1.6.3.6.1 |
| An entry containing objects for the Symmetrix director statistics
for the specified Symmetrix and director. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DirStatStatistics |
|
|
| dirstatTime-stamp |
1.3.6.1.4.1.1139.1.6.3.6.1.1 |
| Time since these statistics were last collected |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| dirstatNum-sym-timeslices |
1.3.6.1.4.1.1139.1.6.3.6.1.2 |
| Number of 1/2 seconds from reset until the Symmetrix internally
snapshots the director counters. You must use this field when
computing a rate. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dirstatNum-rw-reqs |
1.3.6.1.4.1.1139.1.6.3.6.1.3 |
| Total number of I/Os for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dirstatNum-read-reqs |
1.3.6.1.4.1.1139.1.6.3.6.1.4 |
| Total number of read requests for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dirstatNum-write-reqs |
1.3.6.1.4.1.1139.1.6.3.6.1.5 |
| Total number of write requests for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dirstatNum-rw-hits |
1.3.6.1.4.1.1139.1.6.3.6.1.6 |
| Total number of cache hits (read & write) for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dirstatNum-ios |
1.3.6.1.4.1.1139.1.6.3.6.1.8 |
| Total number of cache write hits for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| saDirStatTable |
1.3.6.1.4.1.1139.1.6.3.7 |
| A table of Symmetrix SA director statistics for the indicated
Symmetrix and director instance.
The number of entries is given by the value of symShowDirectorCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DirStatSAStatistics |
|
| saDirStatEntry |
1.3.6.1.4.1.1139.1.6.3.7.1 |
| An entry containing objects for the Symmetrix SA director statistics
for the specified Symmetrix and director. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DirStatSAStatistics |
|
|
| dirstatSANum-system-wp-disconnects |
1.3.6.1.4.1.1139.1.6.3.7.1.3 |
| Total number of system write pending disconnects.
The limit for the system parameter for maximum number
of write pendings was exceeded. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dirstatSANum-device-wp-disconnects |
1.3.6.1.4.1.1139.1.6.3.7.1.4 |
| Total number of device write pending disconnects.
The limit for the device parameter for maximum number
of write pendings was exceeded. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| daDirStatTable |
1.3.6.1.4.1.1139.1.6.3.8 |
| A table of Symmetrix DA director statistics for the indicated
Symmetrix and director instance.
The number of entries is given by the value of symShowDirectorCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DirStatDAStatistics |
|
| daDirStatEntry |
1.3.6.1.4.1.1139.1.6.3.8.1 |
| An entry containing objects for the Symmetrix DA director statistics
for the specified Symmetrix and director. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DirStatDAStatistics |
|
|
| dirstatDANum-pf-tracks |
1.3.6.1.4.1.1139.1.6.3.8.1.1 |
| The number of prefetched tracks. Remember that cache may contain
vestigial read or written tracks. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dirstatDANum-pf-tracks-used |
1.3.6.1.4.1.1139.1.6.3.8.1.2 |
| The number of prefetched tracks used to satisfy
read/write requests |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dirstatDANum-pf-tracks-unused |
1.3.6.1.4.1.1139.1.6.3.8.1.3 |
| The number of prefetched tracks unused and replaced by another. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dirstatDANum-pf-short-misses |
1.3.6.1.4.1.1139.1.6.3.8.1.4 |
| The number of tracks already being prefetched when a read/write
request for that track occurred. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dirstatDANum-pf-long-misses |
1.3.6.1.4.1.1139.1.6.3.8.1.5 |
| The number of tracks requiring a complete fetch when a read/write
request for that track occurred. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dirstatDANum-pf-restarts |
1.3.6.1.4.1.1139.1.6.3.8.1.6 |
| The number of times that a prefetch task needed to be restarted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dirstatDANum-pf-mismatches |
1.3.6.1.4.1.1139.1.6.3.8.1.7 |
| The number of times a prefetch task needed to be canceled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| raDirStatTable |
1.3.6.1.4.1.1139.1.6.3.9 |
| A table of Symmetrix RA director statistics for the indicated
Symmetrix and director instance.
The number of entries is given by the value of symShowDirectorCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DirStatRAStatistics |
|
| raDirStatEntry |
1.3.6.1.4.1.1139.1.6.3.9.1 |
| An entry containing objects for the Symmetrix RA director statistics
for the specified Symmetrix and director. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DirStatRAStatistics |
|
|
| dirstatRANum-system-wp-disconnects |
1.3.6.1.4.1.1139.1.6.3.9.1.3 |
| Total number of system write pending disconnects.
The limit for the system parameter for maximum number
of write pendings was exceeded. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dirstatRANum-device-wp-disconnects |
1.3.6.1.4.1.1139.1.6.3.9.1.4 |
| Total number of device write pending disconnects.
The limit for the device parameter for maximum number
of write pendings was exceeded. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| dirStatPortCountTable |
1.3.6.1.4.1.1139.1.6.3.10.1 |
| A list of the number of available ports for the given
Symmetrix and director instance.
The number of entries is given by the value of symShowDirectorCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymapiDirPortStatPortCount |
|
| dirStatPortCountEntry |
1.3.6.1.4.1.1139.1.6.3.10.1.1 |
| An entry containing objects for the number of available
ports for the specified Symmetrix and director |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymapiDirPortStatPortCount |
|
|
| dirPortStatPortCount |
1.3.6.1.4.1.1139.1.6.3.10.1.1.1 |
| The number of entries in the dirPortStatTable table for the indicated
Symmetrix and director instance |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dirPortStatTable |
1.3.6.1.4.1.1139.1.6.3.10.2 |
| A table of Symmetrix director statistics for the indicated
Symmetrix, director and port instance.
The number of entries is given by the value dirPortStatPortCount. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DirPortStatistics |
|
| dirPortStatEntry |
1.3.6.1.4.1.1139.1.6.3.10.2.1 |
| An entry containing objects for the Symmetrix director port statistics
for the specified Symmetrix, director, and port. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DirPortStatistics |
|
|
| portstatTime-stamp |
1.3.6.1.4.1.1139.1.6.3.10.2.1.1 |
| Time since these statistics were last collected |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| portstatNum-sym-timeslices |
1.3.6.1.4.1.1139.1.6.3.10.2.1.2 |
| Number of 1/2 seconds from reset until the Symmetrix internally
snapshots the director counters. You must use this field when
computing a rate. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| portstatNum-rw-reqs |
1.3.6.1.4.1.1139.1.6.3.10.2.1.3 |
| The number of I/O requests (reads and writes) handled by
the front-end port.
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UInt32 |
|
|
| symmEventMaxEvents |
1.3.6.1.4.1.1139.1.7.1 |
| Max number of events that can be defined
in each Symmetrixes symmEventTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| symmEventTable |
1.3.6.1.4.1.1139.1.7.2 |
| The table of Symmetrix events. Errors,
warnings, and information should be reported
in this table. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SymmEventEntry |
|
| symmEventEntry |
1.3.6.1.4.1.1139.1.7.2.1 |
| Each entry contains information on
a specific event for the given
Symmetrix. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SymmEventEntry |
|
|
| symmEventIndex |
1.3.6.1.4.1.1139.1.7.2.1.1 |
| Each Symmetrix has its own event buffer.
As it wraps, it may write over previous events.
This object is an index into the buffer.
The index value is an incrementing integer starting
from one every time there is a table reset.
On table reset, all contents are emptied and
all indeces are set to zero. When an
event is added to the table, the event is
assigned the next higher integer value than
the last item entered into the table. If the
index value reaches its maximum value, the next
item entered will cause the index value to
roll over and start at one again. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..2147483647 |
|
| symmEventTime |
1.3.6.1.4.1.1139.1.7.2.1.2 |
| This is the time when the event occurred.
It has the following format.
DOW MON DD HH:MM:SS YYYY
DOW=day of week
MON=Month
DD=day number
HH=hour number
MM=minute number
SS=seconds number
YYYY=year number
If not applicable, return a NULL string. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| symmEventSeverity |
1.3.6.1.4.1.1139.1.7.2.1.3 |
| The event severity level. These map directly
with those from the FIbre Mib, version 2.2 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(1), emergency(2), alert(3), critical(4), error(5), warning(6), notify(7), info(8), debug(9), mark(10) |
|
| emcDeviceStatusTrap |
1 |
| This trap is sent for each device found 'NOT READY' during
the most recent test of each attached Symmetrix for Device
Not Ready conditions.
|
| TRAP-TYPE |
|
|
|
| emcSymmetrixStatusTrap |
2 |
| This trap is sent for each new WARNING and FATAL error
condition found during the most recent 'health'
test of each attached Symmetrix.
Format of the message is:
Symmetrix s/n: %s, Dir - %d, %04X, %s, %s
an example of which is:
Symmetrix s/n: 12345, Dir - 31, 470, Thu Apr 6 10:53:16 2000, Environmental alarm: Battery Fault
|
| TRAP-TYPE |
|
|
|
| emcRatiosOutofRangeTrap |
3 |
| This trap is sent for each attached Symmetrix when the
Hit Ratio, Write Ratio, or IO/sec Ratio were out of the
specified range during the most recent test for these
conditions. The ratios are preconfigured at agent
startup, and apply to all Symmetrixes attached.
|
| TRAP-TYPE |
|
|
|
| discoveryTableChange |
4 |
| This trap is sent whenever the periodic check of attached
Symmetrixes reveals newly attached Symmetrixes, or changes
in the configuration of previously attached Symmetrixes.
|
| TRAP-TYPE |
|
|
|
| emcSymmetrixEventTrap |
5 |
| This trap is sent whenever a non-specific (i.e. not traps 1-4)
event occurs in the agent, or for a specific Symmetrix.
|
| TRAP-TYPE |
|
|
|