ENTERASYS-IP-SLA-MIB

File: ENTERASYS-IP-SLA-MIB.mib (59169 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
SNMP-FRAMEWORK-MIB INET-ADDRESS-MIB ENTERASYS-MIB-NAMES

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Gauge32 RowStatus MODULE-COMPLIANCE
OBJECT-GROUP SnmpAdminString InetAddressType
InetAddress InetPortNumber etsysModules

Defined Types

EtsysIpSlaConfigEntry  
SEQUENCE    
  etsysIpSlaConfigIndex Unsigned32
  etsysIpSlaConfigType INTEGER
  etsysIpSlaConfigDestType InetAddressType
  etsysIpSlaConfigDestAddr InetAddress
  etsysIpSlaConfigDestPort InetPortNumber
  etsysIpSlaConfigProbeName SnmpAdminString
  etsysIpSlaConfigPathCount Unsigned32
  etsysIpSlaConfigHopCount Unsigned32
  etsysIpSlaConfigHistoryCollections Unsigned32
  etsysIpSlaConfigHistoryBuckets Unsigned32
  etsysIpSlaConfigHistoryBucketType INTEGER
  etsysIpSlaConfigHistorySamples Unsigned32
  etsysIpSlaConfigHistoryInterval Unsigned32
  etsysIpSlaConfigHistoryAgeout Unsigned32
  etsysIpSlaConfigHistoryWrap INTEGER
  etsysIpSlaConfigDistributionCount Unsigned32
  etsysIpSlaConfigDistributionInterval Unsigned32
  etsysIpSlaConfigStatisticsCollections Unsigned32
  etsysIpSlaConfigStatus RowStatus

EtsysIpSlaScheduleEntry  
SEQUENCE    
  etsysIpSlaScheduleStartTime Unsigned32
  etsysIpSlaScheduleRecurrence Unsigned32
  etsysIpSlaScheduleTestRepetitions Unsigned32
  etsysIpSlaScheduleTestDuration Unsigned32
  etsysIpSlaScheduleTestFrequency Unsigned32
  etsysIpSlaScheduleTestState INTEGER
  etsysIpSlaScheduleTestStatus SnmpAdminString

EtsysIpSlaCollectionEntry  
SEQUENCE    
  etsysIpSlaCollectionType INTEGER
  etsysIpSlaCollectionIndex Unsigned32
  etsysIpSlaCollectionStartTime Unsigned32
  etsysIpSlaCollectionNumPaths Gauge32
  etsysIpslaCollectionNumHops Gauge32

EtsysIpSlaPathEntry  
SEQUENCE    
  etsysIpSlaPathIndex Unsigned32
  etsysIpSlaHopIndex Unsigned32
  etsysIpSlaHopDestType InetAddressType
  etsysIpSlaHopDestAddr InetAddress

EtsysIpSlaRttDataEntry  
SEQUENCE    
  etsysIpSlaBucketIndex Unsigned32
  etsysIpSlaBucketTime Unsigned32
  etsysIpSlaRttDataSamples Gauge32
  etsysIpSlaRttDataMinDelay Gauge32
  etsysIpSlaRttDataAvgDelay Gauge32
  etsysIpSlaRttDataMaxDelay Gauge32
  etsysIpSlaRttDataSum Gauge32
  etsysIpSlaRttDataSumSquareLow Gauge32
  etsysIpSlaRttDataSumSquareHigh Gauge32
  etsysIpSlaRttDataPktOutOfOrder Gauge32
  etsysIpSlaRttDataPktLateArrival Gauge32
  etsysIpSlaRttDataPktMissing Gauge32
  etsysIpSlaRttDataPktIpTosMismatch Gauge32
  etsysIpSlaRttDataPktVlanPcpMismatch Gauge32
  etsysIpSlaRttDataTxErrors Gauge32

EtsysIpSlaPdvDataEntry  
SEQUENCE    
  etsysIpSlaPdvDataSamples Gauge32
  etsysIpSlaPdvDataMinPositiveSD Gauge32
  etsysIpSlaPdvDataMaxPositiveSD Gauge32
  etsysIpSlaPdvDataNumPositiveSD Gauge32
  etsysIpSlaPdvDataSumPositiveSD Gauge32
  etsysIpSlaPdvDataSumSquarePositiveSD Gauge32
  etsysIpSlaPdvDataMinNegativeSD Gauge32
  etsysIpSlaPdvDataMaxNegativeSD Gauge32
  etsysIpSlaPdvDataNumNegativeSD Gauge32
  etsysIpSlaPdvDataSumNegativeSD Gauge32
  etsysIpSlaPdvDataSumSquareNegativeSD Gauge32
  etsysIpSlaPdvDataMinPositiveDS Gauge32
  etsysIpSlaPdvDataMaxPositiveDS Gauge32
  etsysIpSlaPdvDataNumPositiveDS Gauge32
  etsysIpSlaPdvDataSumPositiveDS Gauge32
  etsysIpSlaPdvDataSumSquarePositiveDS Gauge32
  etsysIpSlaPdvDataMinNegativeDS Gauge32
  etsysIpSlaPdvDataMaxNegativeDS Gauge32
  etsysIpSlaPdvDataNumNegativeDS Gauge32
  etsysIpSlaPdvDataSumNegativeDS Gauge32
  etsysIpSlaPdvDataSumSquareNegativeDS Gauge32
  etsysIpSlaPdvDataNumOneWaySD Gauge32
  etsysIpSlaPdvDataMinOneWaySD Gauge32
  etsysIpSlaPdvDataMaxOneWaySD Gauge32
  etsysIpSlaPdvDataSumOneWaySD Gauge32
  etsysIpSlaPdvDataSumSquareOneWaySD Gauge32
  etsysIpSlaPdvDataNumOneWayDS Gauge32
  etsysIpSlaPdvDataMinOneWayDS Gauge32
  etsysIpSlaPdvDataMaxOneWayDS Gauge32
  etsysIpSlaPdvDataSumOneWayDS Gauge32
  etsysIpSlaPdvDataSumSquareOneWayDS Gauge32

EtsysIpSlaDistDataEntry  
SEQUENCE    
  etsysIpSlaDistMinRange Unsigned32
  etsysIpSlaDistMaxRange Unsigned32

Defined Values

etsysIpSlaMIB 1.3.6.1.4.1.5624.1.2.94
This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to the IP Service Level Agreement (SLA) functionality. This MIB was designed to be used for configuring IP SLA entries, scheduling those entries to run tests, and retrieving the round-trip-time and packet delay variation (jitter) data. Management entities MAY use this data to verify the service provider is meeting its SLA obligation.
MODULE-IDENTITY    

etsysIpSla 1.3.6.1.4.1.5624.1.2.94.1
OBJECT IDENTIFIER    

etsysIpSlaGlobals 1.3.6.1.4.1.5624.1.2.94.1.1
OBJECT IDENTIFIER    

etsysIpSlaTables 1.3.6.1.4.1.5624.1.2.94.1.2
OBJECT IDENTIFIER    

etsysIpSlaMaxEntries 1.3.6.1.4.1.5624.1.2.94.1.1.1
The maximum number of IP SLA entries that can be configured within the system.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

etsysIpSlaEntriesInUse 1.3.6.1.4.1.5624.1.2.94.1.1.2
The number of IP SLA entries currently configured within the system.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaMaxDataEntries 1.3.6.1.4.1.5624.1.2.94.1.1.3
The maximum number of data constructs available within the system. Row entries in the etsysIpSlaRttDataTable and the etsysIpSlaPdvDataTable consume this resource.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

etsysIpSlaDataEntriesInUse 1.3.6.1.4.1.5624.1.2.94.1.1.4
The number of data constructs currently used within the system Row entries in the etsysIpSlaRttDataTable and the etsysIpSlaPdvDataTable consume this resource.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaConfigTable 1.3.6.1.4.1.5624.1.2.94.1.2.1
This table defines the configuration parameters and attributes pertaining to an IP SLA entry. The agent limits the size of this table. The object etsysIpSlaMaxEntries defines the maximum number of entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysIpSlaConfigEntry

etsysIpSlaConfigEntry 1.3.6.1.4.1.5624.1.2.94.1.2.1.1
An entry (conceptual row) in the etsysIpSlaConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysIpSlaConfigEntry  

etsysIpSlaConfigIndex 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.1
A value that uniquely identifies a row in the etsysIpSlaConfigTable. This is the primary index used for all tables that have an association with an IP SLA entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

etsysIpSlaConfigType 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.2
The type of the IP SLA entry. echo(1) - Specifies that the IP SLA entry collect the round-trip-time data for a destination host. The IP SLA entry MUST use a probe of type 'icmpTs'. jitter(2) - Specifies that the IP SLA entry collect the packet delay variation (jitter) and round-trip-time data for a destination host. The IP SLA entry MUST use a probe of type 'icmpTs'. Both the source and destination hosts MUST have clock synchorinzation enabled for accurate packet delay variation data.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER echo(1), jitter(2)  

etsysIpSlaConfigDestType 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.3
The address family of the destination host specified in etsysIpSlaConfigDestAddr.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

etsysIpSlaConfigDestAddr 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.4
The destination address of the host. The IP SLA entry collects the data specified in etsysIpSlaConfigType for packets sent to this host.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

etsysIpSlaConfigDestPort 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.5
The port number of the service on the destination host. The 'icmpTs' entries MUST use the default value of zero.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

etsysIpSlaConfigProbeName 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.6
The name of the user configured probe this entry references. If this value is the empty string, the default probe assigned to the IP SLA application is used for running tests.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..31)  

etsysIpSlaConfigPathCount 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.7
A packet may traverse different routes to a destination host. This value specifies how many different paths to keep track of. Only the first etsysIpSlaConfigPathCount will be kept, additional detected paths are ignored. This object is only valid when the etsysIpSlaConfigType is 'echo'. An 'inconsistentValue' return code is returned for a set operation when the type is other than 'echo'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4  

etsysIpSlaConfigHopCount 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.8
The number of hops per path the entry keeps data for. Only the first etsysIpSlaConfigHopCount will be kept, additional hops along the path are ignored. This object is only valid when the etsysIpSlaConfigType is 'echo'. An 'inconsistentValue' return code is returned for a set operation when the type is other than 'echo'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..8  

etsysIpSlaConfigHistoryCollections 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.9
The number of history collections to store in memory. A new collection begins with the start of each test. The etsysIpSlaScheduleTable dictates when tests start and stop. Modifying this value from a larger value to a smaller value causes the difference to be removed from memory. The collection with higher index values are removed. The history collections are found in the etsysIpSlaRttDataTable and the etsysIpSlaPdvDataTable using a etsysIpSlaCollectionType of 'history'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10  

etsysIpSlaConfigHistoryBuckets 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.10
The number of history buckets to maintain per history collection. Each bucket contains statistical information from the test.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..50  

etsysIpSlaConfigHistoryBucketType 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.11
The history bucket type. This determines the depth of each bucket. static(1) - A static bucket type indicates the depth of each bucket is fixed. The depth is specified in etsysIpSlaConfigHistorySamples. timed(2) - A timed bucket has a variable bucket depth. The etsysIpSlaConfigHistoryInterval specifies the total time for the bucket. To estimate the depth of the bucket, multiply the history interval by the expected number of received packets per second.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER static(1), timed(2)  

etsysIpSlaConfigHistorySamples 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.12
Specifies the static depth of each bucket. Modifying this value changes the depth for current and future buckets. Previous buckets MUST NOT be modified. This object is only valid when etsysIpSlaConfigHistoryBucketType is 'static'. An 'inconsistentValue' return code is returned for a set operation when the type is other than 'static'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 16..512  

etsysIpSlaConfigHistoryInterval 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.13
Specifies the length of time data should be continuously stored in the same bucket. Modifying this value changes the time for the current and future buckets. Previous buckets MUST NOT be modified. Data in the current bucket MUST NOT be altered either. This object is only valid when etsysIpSlaConfigHistoryBucketType is 'timed'. An 'inconsistentValue' return code is returned for a set operation when the type is other than 'timed'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 30..3600  

etsysIpSlaConfigHistoryAgeout 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.14
The length of time a history collection remains in memory. The application reclaims the history collection's memory when it ages out. A value of zero means the history collection does not ageout.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 15..7200  

etsysIpSlaConfigHistoryWrap 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.15
Specifies whether to replace the oldest history collection with a newer data set, or stop collecting history data when the collection limit is reached. wrap(1) - When the history collection reaches its limit, the oldest history collection data is replaced with the newer data set. noWrap(2) - Once the history collection limit is reached, no new history collections are stored unless they age out.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER wrap(1), noWrap(2)  

etsysIpSlaConfigDistributionCount 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.16
The number of statistical distributions to keep data for. This object only accumulates round-trip-time data calculations. This objects works in conjunction with the etsysIpSlaConfigDistributionInterval object. The last interval accumulates statistical distributions for all the entries from its interval start point to infinity (maximum value for a 32-bit integer).
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 2..5  

etsysIpSlaConfigDistributionInterval 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.17
The statistical distribution interval. Example: etsysIpSlaConfigDistributionCount = 5 etsysIpSlaConfigDistributionInterval = 20 milliseconds Distribution 1 : < 0 - 19 ms> Distribution 2 : <20 - 39 ms> Distribution 3 : <40 - 59 ms> Distribution 4 : <60 - 79 ms> Distribution 5 : <80 - 4294967295 ms>
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 5..1000  

etsysIpSlaConfigStatisticsCollections 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.18
The number of statistical collections to store in memory. Each collection consists of the summary of results and the statistical distribution data. The summary of results consists of the round-trip-time and, if applicable, the packet delay variation data. A new collection begins with the start of each test. The etsysIpSlaScheduleTable dictates when tests start and stop. The collection automatically wraps back to one when the collection limit, configured by this object, is reached. The statistics stored in the collection are cleared prior to starting a new test. Modifying this value from a larger to a smaller value causes the difference to be removed from memory. The collections with the higher index values are removed. The statistical collections are found in the etsysIpSlaRttDataTable and the etsysIpSlaPdvDataTable.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10  

etsysIpSlaConfigStatus 1.3.6.1.4.1.5624.1.2.94.1.2.1.1.19
This object permits management of the table by facilitating actions such as row creation and deletion. Creation and activation of a conceptual row in this table MUST be performed as a single operation by setting this object to createAndGo(4). Suspension of an active conceptual row is not supported. Consequently, setting this object to createAndWait(5) or notInService(2) SHALL fail.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

etsysIpSlaScheduleTable 1.3.6.1.4.1.5624.1.2.94.1.2.2
This table provides the scheduling parameters and attributes pertaining to an IP SLA entry. The scheduler determines when a test should execute, the length of time that test should run, the number of iterations of the test, and when the next scheduled test should start. An entry MUST exist in the etsysIpSlaConfigTable prior to setting the scheduling objects.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysIpSlaScheduleEntry

etsysIpSlaScheduleEntry 1.3.6.1.4.1.5624.1.2.94.1.2.2.1
An entry (conceptual row) in the etsysIpSlaScheduleTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysIpSlaScheduleEntry  

etsysIpSlaScheduleStartTime 1.3.6.1.4.1.5624.1.2.94.1.2.2.1.1
This is the initial start time for the entry's set of test cycles. This value is expressed in seconds since the Epoch (Jan 1, 1970). The scheduled entry MUST be cancelled prior to modifying the start time. An 'inconsistentValue' return code is returned for a set operation with a value other than zero if the etsysIpSlaScheduleTestState is NOT 'inactive'. Setting this value to zero cancels the scheduled tests and the etsysIpSlaScheduleTestState transitions to 'inactive'.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

etsysIpSlaScheduleRecurrence 1.3.6.1.4.1.5624.1.2.94.1.2.2.1.2
This value represents the time between multiple test cycles. This value is the length of time between the end of one test cycle and the start of the next test cycle. A new test cycle SHALL NOT begin while a current cycle is running. Thus, this value SHOULD be greater than the result of the number repetitions multiplied by the sum of the duration and the frequency. If the value is less than the run time of a test cycle, the overlapping test cycles are skipped. For example, if there are two repetitions with a duration of 60 seconds and a frequency of 30 seconds, the test cycle runs for 180 seconds. Notes: Maximum value is 90 days; a value of 86400 is one day. A value of zero indicates this scheduled entry will not repeat its test cycle.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 120..7776000  

etsysIpSlaScheduleTestRepetitions 1.3.6.1.4.1.5624.1.2.94.1.2.2.1.3
The number of test iterations per test cycle.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

etsysIpSlaScheduleTestDuration 1.3.6.1.4.1.5624.1.2.94.1.2.2.1.4
The length of the time each test iteration should execute.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 30..3600  

etsysIpSlaScheduleTestFrequency 1.3.6.1.4.1.5624.1.2.94.1.2.2.1.5
The length of time between each test iteration.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 30..3600  

etsysIpSlaScheduleTestState 1.3.6.1.4.1.5624.1.2.94.1.2.2.1.6
This is the state of the IP SLA entry test. inactive(1) - The entry is not currently scheduled. complete(2) - The entry has completed its test cycle and will not be rescheduled. running(3) - A test cycle is currently executing. queued(4) - The entry is on scheduler's queue and will start when the entry expires and is removed from the queue. At this point, it's state transitions to 'running'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), complete(2), running(3), queued(4)  

etsysIpSlaScheduleTestStatus 1.3.6.1.4.1.5624.1.2.94.1.2.2.1.7
Provides a brief description of the test. The scheduler generates this string based on the test's state and where it is in it's tests cycle. For example, if the etsysIpSlaScheduleTestState is 'queued' and there is 193 seconds prior to the next test cycle starting, the string MAY read: Cycle begins in 193 seconds An implementation MAY choose to always return the empty string.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

etsysIpSlaCollectionTable 1.3.6.1.4.1.5624.1.2.94.1.2.3
This table provides generic information about the data collections stored in the IP SLA entry. A new collection begins at the beginning of each test.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysIpSlaCollectionEntry

etsysIpSlaCollectionEntry 1.3.6.1.4.1.5624.1.2.94.1.2.3.1
An entry (conceptual row) in the etsysIpSlaCollectionTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysIpSlaCollectionEntry  

etsysIpSlaCollectionType 1.3.6.1.4.1.5624.1.2.94.1.2.3.1.1
This identifies the collection type for this row entry. Each collection will have the 'summary' data. If the etsysIpSlaConfigDistributionCount is not zero, the collection will have a 'distribution' set of data. If the etsysIpSlaConfigHistoryCollections is not zero, the collection will have a 'history' set of data. summary(1) - The row entry data corresponds to the cumulative statistics gathered during a test. distribution(2) - The row entry data corresponds to the statistical distribution of the round-trip- time data. history(3) - The row entry data corresponds to a storage history collection of data.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER summary(1), distribution(2), history(3)  

etsysIpSlaCollectionIndex 1.3.6.1.4.1.5624.1.2.94.1.2.3.1.2
A value that uniquely identifies a collection of data for the IP SLA entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

etsysIpSlaCollectionStartTime 1.3.6.1.4.1.5624.1.2.94.1.2.3.1.3
The start time of the test for this collection of data. This value is expressed in seconds since the Epoch (Jan 1, 1970).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

etsysIpSlaCollectionNumPaths 1.3.6.1.4.1.5624.1.2.94.1.2.3.1.4
This is the total number of paths available to this collection of data.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpslaCollectionNumHops 1.3.6.1.4.1.5624.1.2.94.1.2.3.1.5
This is the total number of hops per path in this collection of data.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPathTable 1.3.6.1.4.1.5624.1.2.94.1.2.4
This table provides the information for the path and hop data of an IP SLA entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysIpSlaPathEntry

etsysIpSlaPathEntry 1.3.6.1.4.1.5624.1.2.94.1.2.4.1
An entry (conceptual row) in the etsysIpSlaPathTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysIpSlaPathEntry  

etsysIpSlaPathIndex 1.3.6.1.4.1.5624.1.2.94.1.2.4.1.1
This value represents a unique path discovered to reach the destination host identified by etsysIpSlaConfigDestAddr. A value of zero for this object and etsysIpSlaHopIndex represent the destination host.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

etsysIpSlaHopIndex 1.3.6.1.4.1.5624.1.2.94.1.2.4.1.2
This value represents the nth-hop in the path to the destination host identified by etsysIpSlaConfigDestAddr. A value of zero for this object and etsysIpSlaPathIndex represent the destination host.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

etsysIpSlaHopDestType 1.3.6.1.4.1.5624.1.2.94.1.2.4.1.3
The address family of the hop in the path.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

etsysIpSlaHopDestAddr 1.3.6.1.4.1.5624.1.2.94.1.2.4.1.4
The address of the hop in the path.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

etsysIpSlaRttDataTable 1.3.6.1.4.1.5624.1.2.94.1.2.5
This table provides the round-trip-time statistics data for the IP SLA entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysIpSlaRttDataEntry

etsysIpSlaRttDataEntry 1.3.6.1.4.1.5624.1.2.94.1.2.5.1
An entry (conceptual row) in the etsysIpSlaRttDataTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysIpSlaRttDataEntry  

etsysIpSlaBucketIndex 1.3.6.1.4.1.5624.1.2.94.1.2.5.1.1
A value that identifies a set of RTT data. The value of this object is influenced by the etsysIpSlaCollectionType. If the collection type is 'summary', the value of this object is one. There is only one RTT summary per data collection. If the collection type is 'distribution' the value of this object represents the distribution index. There is an associated entry in the etsysIpSlaDistDataTable. If the collection type is 'history', the value of this object is in the range of one to etsysIpSlaConfigHistoryBuckets.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

etsysIpSlaBucketTime 1.3.6.1.4.1.5624.1.2.94.1.2.5.1.2
The time the first RTT data was stored in the bucket. This value is expressed in seconds since the Epoch (Jan 1, 1970).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

etsysIpSlaRttDataSamples 1.3.6.1.4.1.5624.1.2.94.1.2.5.1.3
The RTT samples that were successfully measured.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaRttDataMinDelay 1.3.6.1.4.1.5624.1.2.94.1.2.5.1.4
The minimum RTT measurement from the successful samples.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaRttDataAvgDelay 1.3.6.1.4.1.5624.1.2.94.1.2.5.1.5
The average RTT calculated from the sum of the successful samples.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaRttDataMaxDelay 1.3.6.1.4.1.5624.1.2.94.1.2.5.1.6
The maximum RTT measurement from the successful samples.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaRttDataSum 1.3.6.1.4.1.5624.1.2.94.1.2.5.1.7
The summation of the successful RTT samples.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaRttDataSumSquareLow 1.3.6.1.4.1.5624.1.2.94.1.2.5.1.8
The low 32 bits of the sum of squares of the successful RTT samples.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaRttDataSumSquareHigh 1.3.6.1.4.1.5624.1.2.94.1.2.5.1.9
The high 32 bits of the sum of squares of the successful RTT samples.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaRttDataPktOutOfOrder 1.3.6.1.4.1.5624.1.2.94.1.2.5.1.10
The number of packets that arrived out of order. The RTT for these packets are not included in any calculations.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaRttDataPktLateArrival 1.3.6.1.4.1.5624.1.2.94.1.2.5.1.11
The number of packets that arrived late. The RTT for these packets are not included in any calculations.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaRttDataPktMissing 1.3.6.1.4.1.5624.1.2.94.1.2.5.1.12
The number of packets lost.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaRttDataPktIpTosMismatch 1.3.6.1.4.1.5624.1.2.94.1.2.5.1.13
The number of reply packets whose IP TOS field mismatched the value in the request.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaRttDataPktVlanPcpMismatch 1.3.6.1.4.1.5624.1.2.94.1.2.5.1.14
The number of reply packets whose VLAN PCP field mismatched the value in the request.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaRttDataTxErrors 1.3.6.1.4.1.5624.1.2.94.1.2.5.1.15
The number transmissions errors.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataTable 1.3.6.1.4.1.5624.1.2.94.1.2.6
This table provides the packet delay variation (jitter) data for the IP SLA entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysIpSlaPdvDataEntry

etsysIpSlaPdvDataEntry 1.3.6.1.4.1.5624.1.2.94.1.2.6.1
An entry (conceptual row) in the etsysIpSlaPdvDataTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysIpSlaPdvDataEntry  

etsysIpSlaPdvDataSamples 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.1
The PDV samples that were successfully measured.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataMinPositiveSD 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.2
The minimum PDV of all positive values for packets sent from the source to the destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataMaxPositiveSD 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.3
The maximum PDV of all positive values for packets sent from the source to the destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataNumPositiveSD 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.4
The total number of positive PDV values for packets sent from the source to the destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataSumPositiveSD 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.5
The sum of the positive PDV values for packets sent from the source to the destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataSumSquarePositiveSD 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.6
The sum of the squared positive PDV values for packets sent from the source to the destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataMinNegativeSD 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.7
The negative PDV values are stored as absolute values. The value of this object is the minimum value from the set of absolute values for packets sent from the source to the destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataMaxNegativeSD 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.8
The negative PDV values are stored as absolute values. The value of this object is the maximum value from the set of absolute values for packets sent from the source to the destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataNumNegativeSD 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.9
The total number of negative PDV values for packets sent from the source to the destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataSumNegativeSD 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.10
The sum of the negative PDV values for packets sent from the source to the destination. The absolute value is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataSumSquareNegativeSD 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.11
The sum of the squared negative PDV values for packets sent from the source to the destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataMinPositiveDS 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.12
The minimum PDV of all positive values for packets sent from the destination to the source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataMaxPositiveDS 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.13
The maximum PDV of all positive values for packets sent from the destination to the source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataNumPositiveDS 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.14
The total number of positive PDV values for packets sent from the destination to the source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataSumPositiveDS 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.15
The sum of the positive PDV values for packets sent from the destination to the source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataSumSquarePositiveDS 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.16
The sum of the squared positive PDV values for packets sent from the destination to the source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataMinNegativeDS 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.17
The negative PDV values are stored as absolute values. The value of this object is the minimum value from the set of absolute values for packets sent from the destination to the source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataMaxNegativeDS 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.18
The negative PDV values are stored as absolute values. The value of this object is the maximum value from the set of absolute values for packets sent from the destination to the source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataNumNegativeDS 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.19
The total number of negative PDV values for packets sent from the destination to the source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataSumNegativeDS 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.20
The sum of the negative PDV values for packets sent from the destination to the source. The absolute value is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataSumSquareNegativeDS 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.21
The sum of the squared negative PDV values for packets sent from the destination to the source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataNumOneWaySD 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.22
The total number of one-way delay values for packets sent from the source to the destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataMinOneWaySD 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.23
The minimum one-way delay value for packets sent from the source to the destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataMaxOneWaySD 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.24
The maximum one-way delay value for packets sent from the source to the destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataSumOneWaySD 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.25
The sum of the one-way delays for packets sent from the source to the destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataSumSquareOneWaySD 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.26
The sum of squares of the one-way delays for packets sent from the source to the destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataNumOneWayDS 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.27
The total number of one-way delay values for packets sent from the destination to the source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataMinOneWayDS 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.28
The minimum one-way delay value for packets sent from the destination to the source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataMaxOneWayDS 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.29
The maximum one-way delay value for packets sent from the destination to the source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataSumOneWayDS 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.30
The sum of the one-way delays for packets sent from the destination to the source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaPdvDataSumSquareOneWayDS 1.3.6.1.4.1.5624.1.2.94.1.2.6.1.31
The sum of squares of the one-way delays for packets sent from the destination to the source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysIpSlaDistDataTable 1.3.6.1.4.1.5624.1.2.94.1.2.7
This table provides the packet distribution data for the IP SLA entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysIpSlaDistDataEntry

etsysIpSlaDistDataEntry 1.3.6.1.4.1.5624.1.2.94.1.2.7.1
An entry (conceptual row) in the etsysIpSlaDistDataTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysIpSlaDistDataEntry  

etsysIpSlaDistMinRange 1.3.6.1.4.1.5624.1.2.94.1.2.7.1.1
This is the lower bound value for this statistical distribution segment. The etsysIpSlaConfigDistributionInterval is used to determine this value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

etsysIpSlaDistMaxRange 1.3.6.1.4.1.5624.1.2.94.1.2.7.1.2
This is the upper bound value for this statistical distribution segment. The etsysIpSlaConfigDistributionInterval is used to determine this value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

etsysIpSlaConformance 1.3.6.1.4.1.5624.1.2.94.2
OBJECT IDENTIFIER    

etsysIpSlaGroups 1.3.6.1.4.1.5624.1.2.94.2.1
OBJECT IDENTIFIER    

etsysIpSlaCompliances 1.3.6.1.4.1.5624.1.2.94.2.2
OBJECT IDENTIFIER    

etsysIpSlaGlobalGroup 1.3.6.1.4.1.5624.1.2.94.2.1.1
This group defines information pertaining to the global resources used by the Enterasys IP SLA functionality.
Status: current Access: read-only
OBJECT-GROUP    

etsysIpSlaConfigGroup 1.3.6.1.4.1.5624.1.2.94.2.1.2
This group defines the objects used to configure and schedule the entries used by the Enterasys IP SLA functionality.
Status: current Access: read-only
OBJECT-GROUP    

etsysIpSlaCollectionGroup 1.3.6.1.4.1.5624.1.2.94.2.1.3
This group defines the objects required to support the data collections for an IP SLA entry.
Status: current Access: read-only
OBJECT-GROUP    

etsysIpSlaPathGroup 1.3.6.1.4.1.5624.1.2.94.2.1.4
This group defines the path and hop objects used by the IP SLA entries.
Status: current Access: read-only
OBJECT-GROUP    

etsysIpSlaRttGroup 1.3.6.1.4.1.5624.1.2.94.2.1.5
This group defines the round-trip-time data objects defined for the IP SLA entries used by the Enterasys IP SLA functionality.
Status: current Access: read-only
OBJECT-GROUP    

etsysIpSlaPdvGroup 1.3.6.1.4.1.5624.1.2.94.2.1.6
This group defines the packet delay variation (jitter) data objects defined for the IP SLA entries used by the Enterasys IP SLA functionality.
Status: current Access: read-only
OBJECT-GROUP    

etsysIpSlaDistribGroup 1.3.6.1.4.1.5624.1.2.94.2.1.7
This group defines the statistical distribution range data.
Status: current Access: read-only
OBJECT-GROUP    

etsysIpSlaCompliance 1.3.6.1.4.1.5624.1.2.94.2.2.1
The compliance statement for devices that support etsysIpSla.
Status: current Access: read-only
MODULE-COMPLIANCE