ENTERASYS-PIM-EXT-MIB

File: ENTERASYS-PIM-EXT-MIB.mib (45421 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
INET-ADDRESS-MIB PIM-STD-MIB ENTERASYS-MIB-NAMES

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Counter32 Gauge32 TEXTUAL-CONVENTION
TruthValue MODULE-COMPLIANCE OBJECT-GROUP
InetVersion pimInterfaceEntry pimStaticRPEntry
pimAnycastRPSetEntry pimGroupMappingEntry pimNeighborEntry
etsysModules

Defined Types

EtsysPimExtIfEntry  
SEQUENCE    
  etsysPimExtIfAdminStatus INTEGER
  etsysPimExtIfOperStatus INTEGER
  etsysPimExtIfP2PNoHellos TruthValue
  etsysPimExtIfNeighborCount Gauge32
  etsysPimExtIfStarGStateLimit Unsigned32
  etsysPimExtIfStarGStateWarnThold Unsigned32
  etsysPimExtIfStarGStateStored Gauge32
  etsysPimExtIfSGStateLimit Unsigned32
  etsysPimExtIfSGStateWarnThold Unsigned32
  etsysPimExtIfSGStateStored Gauge32
  etsysPimExtIfAssertInterval Unsigned32
  etsysPimExtIfAssertHoldtime Unsigned32

EtsysPimExtStaticRPEntry  
SEQUENCE    
  etsysPimExtStaticRPAdminStatus INTEGER

EtsysPimExtAnycastRPSetEntry  
SEQUENCE    
  etsysPimExtAnycastRPSetAdminStatus INTEGER

EtsysPimExtGroupMappingEntry  
SEQUENCE    
  etsysPimExtGroupMappingIsInactive TruthValue

EtsysPimExtNbrStatsEntry  
SEQUENCE    
  etsysPimExtNbrStatsNumRecvHello Counter32
  etsysPimExtNbrStatsNumRecvJoinPrune Counter32
  etsysPimExtNbrStatsNumRecvAssert Counter32
  etsysPimExtNbrStatsNumRecvBSM Counter32
  etsysPimExtNbrStatsNumErrJoinPrune Counter32
  etsysPimExtNbrStatsNumErrAssert Counter32
  etsysPimExtNbrStatsNumErrBSM Counter32

EtsysPimExtIfStatsEntry  
SEQUENCE    
  etsysPimExtIfStatsNumSentHello Counter32
  etsysPimExtIfStatsNumSentJoinPrune Counter32
  etsysPimExtIfStatsNumSentAssert Counter32
  etsysPimExtIfStatsNumSentBsm Counter32
  etsysPimExtIfStatsNumErrHello Counter32
  etsysPimExtIfStatsNumRecvUnknownNbr Counter32
  etsysPimExtIfStatsNumUnknownHelloOpt Counter32

EtsysPimExtNbrMgrEntry  
SEQUENCE    
  etsysPimExtNbrMgrIndex InetVersion
  etsysPimExtNbrMgrEnableUnicastMessages TruthValue
  etsysPimExtNbrMgrAcceptUnicastBsms TruthValue
  etsysPimExtNbrMgrNumSentCRPAdvert Counter32
  etsysPimExtNbrMgrNumSentRegister Counter32
  etsysPimExtNbrMgrNumSentRegisterStop Counter32
  etsysPimExtNbrMgrNumRecvCRPAdvert Counter32
  etsysPimExtNbrMgrNumRecvRegister Counter32
  etsysPimExtNbrMgrNumRecvRegisterStop Counter32
  etsysPimExtNbrMgrNumErrCRPAdvert Counter32
  etsysPimExtNbrMgrNumErrRegister Counter32
  etsysPimExtNbrMgrNumErrRegisterStop Counter32
  etsysPimExtNbrMgrNumRecvIgnoredType Counter32
  etsysPimExtNbrMgrNumRecvUnknownType Counter32
  etsysPimExtNbrMgrNumRecvUnknownVer Counter32
  etsysPimExtNbrMgrNumRecvBadChecksum Counter32
  etsysPimExtNbrMgrNumRecvBadLength Counter32

EtsysPimExtTibMgrEntry  
SEQUENCE    
  etsysPimExtTibMgrIndex InetVersion
  etsysPimExtTibMgrGStateLimit Unsigned32
  etsysPimExtTibMgrGStateWarnThold Unsigned32
  etsysPimExtTibMgrGStateStored Gauge32
  etsysPimExtTibMgrSGStateLimit Unsigned32
  etsysPimExtTibMgrSGStateWarnThold Unsigned32
  etsysPimExtTibMgrSGStateStored Gauge32
  etsysPimExtTibMgrStarGIStateLimit Unsigned32
  etsysPimExtTibMgrStarGIStateWarnThold Unsigned32
  etsysPimExtTibMgrStarGIStateStored Gauge32
  etsysPimExtTibMgrSGIStateLimit Unsigned32
  etsysPimExtTibMgrSGIStateWarnThold Unsigned32
  etsysPimExtTibMgrSGIStateStored Gauge32
  etsysPimExtTibMgrRegSuppressionTime Unsigned32
  etsysPimExtTibMgrRegProbeTime Unsigned32
  etsysPimExtTibMgrKeepalivePeriod Unsigned32

Defined Values

etsysPimExtMIB 1.3.6.1.4.1.5624.1.2.67
This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to the PIM configuration. This MIB was designed to be used in conjunction with the PIM-MIB (RFC 5060) for configuring the PIM protocol parameters. Additional statistical tables are provided for monitoring the PIM protocol.
MODULE-IDENTITY    

etsysPimExtObjects 1.3.6.1.4.1.5624.1.2.67.1
OBJECT IDENTIFIER    

etsysPimExtGlobals 1.3.6.1.4.1.5624.1.2.67.1.1
OBJECT IDENTIFIER    

etsysPimExtTables 1.3.6.1.4.1.5624.1.2.67.1.2
OBJECT IDENTIFIER    

etsysPimExtIfTable 1.3.6.1.4.1.5624.1.2.67.1.2.1
This table provides additional information pertaining to PIM interfaces for Enterasys PIM systems. This table augments the pimInterfaceTable from RFC 5060.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysPimExtIfEntry

etsysPimExtIfEntry 1.3.6.1.4.1.5624.1.2.67.1.2.1.1
An entry (conceptual row) in the etsysPimExtIfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysPimExtIfEntry  

etsysPimExtIfAdminStatus 1.3.6.1.4.1.5624.1.2.67.1.2.1.1.1
The administrative state of PIM on this interface. When the status of this object is set to 'adminStatusDown', no PIM messages will be sent or received on this interface. The TIB state pertaining to this interface is cleared, resulting in the removal of the associated routes from the MFIB. When the status of this object is set to 'adminStatusUp', normal PIM operation will proceed, and multicast state is stored in the TIB when it is learned.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER adminStatusUp(1), adminStatusDown(2)  

etsysPimExtIfOperStatus 1.3.6.1.4.1.5624.1.2.67.1.2.1.1.2
The current operational state of PIM on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER operStatusUp(1), operStatusDown(2), operStatusGoingUp(3), operStatusGoingDown(4), operStatusActFailed(5), operStatusFailed(8), operStatusFailedPerm(10), operStatusFailing(11)  

etsysPimExtIfP2PNoHellos 1.3.6.1.4.1.5624.1.2.67.1.2.1.1.3
Indicates whether this interface is a point-to-point interface. If the value of this object is 'true', neighbors are not required to send PIM-Hello messages. This is provided for backward-compatibility with some older implementations that do not send PIM-Hellos on point-to-point links. Changing the value of this object while the interface is operationally active MAY cause the interface to be deactivated and then reactivated.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

etsysPimExtIfNeighborCount 1.3.6.1.4.1.5624.1.2.67.1.2.1.1.4
The number of PIM neighbors on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysPimExtIfStarGStateLimit 1.3.6.1.4.1.5624.1.2.67.1.2.1.1.5
The maximum number of groups for which the PIM TIB Manager is allowed to store (*,G,I) state specific to this interface. A value of zero means that there is no limit.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

etsysPimExtIfStarGStateWarnThold 1.3.6.1.4.1.5624.1.2.67.1.2.1.1.6
The PIM TIB Manager logs an exception if the number of groups for which it is storing (*,G,I) state specific to this interface exceeds this value. A value of zero means that there is no warning threshold.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

etsysPimExtIfStarGStateStored 1.3.6.1.4.1.5624.1.2.67.1.2.1.1.7
The number of groups for which the PIM TIB Manager is storing (*,G,I) state specific to this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysPimExtIfSGStateLimit 1.3.6.1.4.1.5624.1.2.67.1.2.1.1.8
The maximum number of {source, group} pairs for which the PIM TIB Manager is allowed to store (S,G,I) state specific to this interface. A value of zero means that there is no limit.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

etsysPimExtIfSGStateWarnThold 1.3.6.1.4.1.5624.1.2.67.1.2.1.1.9
The PIM TIB Manager logs an exception if the number of {source, group} pairs for which it is storing (S,G,I) state specific to this interface exceeds this value. A value of zero means that there is no warning threshold.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

etsysPimExtIfSGStateStored 1.3.6.1.4.1.5624.1.2.67.1.2.1.1.10
The number of {source, group} pairs for which the PIM TIB Manager is storing (S,G,I) state specific to this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysPimExtIfAssertInterval 1.3.6.1.4.1.5624.1.2.67.1.2.1.1.11
The frequency at which this router sends PIM Assert messages on this interface when it is the assert winner. This object corresponds to the 'Assert_Time' (180 seconds) minus the 'Assert_Override_Interval' (3 seconds) defined in PIM-SM [RFC 4601]. This value MUST be less than etsysPimExtIfAssertHoldtime.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

etsysPimExtIfAssertHoldtime 1.3.6.1.4.1.5624.1.2.67.1.2.1.1.12
The interval before this router leaves assert loser state on this interface, unless it receives a PIM Assert message that refreshes this state. This object corresponds to the 'Assert_Time' timer value defined in PIM-SM [RFC 4601]. Note: Configuring different values for this object for different routers on the same interface may lead to incorrect protocol operation.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

etsysPimExtStaticRPTable 1.3.6.1.4.1.5624.1.2.67.1.2.2
This table provides additional information pertaining to PIM static rendezvous points for Enterasys PIM systems. This table augments the pimStaticRPTable from RFC 5060.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysPimExtStaticRPEntry

etsysPimExtStaticRPEntry 1.3.6.1.4.1.5624.1.2.67.1.2.2.1
An entry (conceptual row) in the etsysPimExtStaticRPTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysPimExtStaticRPEntry  

etsysPimExtStaticRPAdminStatus 1.3.6.1.4.1.5624.1.2.67.1.2.2.1.1
The administrative state of this entry. When the status of this object is set to 'adminStatusDown', the static rendezvous point will no longer accept PIM messages and is removed from the pimGroupMappingTable. This MAY cause the TIB to be updated. When the status of this object is set to 'adminStatusUp', this static rendezvous point is added to the pimGroupMappingTable and will start accepting PIM messages. This MAY cause the TIB to be updated.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER adminStatusUp(1), adminStatusDown(2)  

etsysPimExtAnycastRPSetTable 1.3.6.1.4.1.5624.1.2.67.1.2.3
This table provides additional information pertaining to PIM anycast rendezvous point sets for Enterasys PIM systems. This table augments the pimAnycastRPSetTable from RFC 5060.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysPimExtAnycastRPSetEntry

etsysPimExtAnycastRPSetEntry 1.3.6.1.4.1.5624.1.2.67.1.2.3.1
An entry (conceptual row) in the etsysPimExtAnycastRPSetTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysPimExtAnycastRPSetEntry  

etsysPimExtAnycastRPSetAdminStatus 1.3.6.1.4.1.5624.1.2.67.1.2.3.1.1
The administrative state of this entry. When the status of this object is set to 'adminStatusDown', the router is removed from the corresponding anycast rendezvous point set. This MAY cause the TIB to be updated. When the status of this object is set to 'adminStatusUp', the router is added to the anycast rendezvous point and will start handling PIM messages. This MAY cause the TIB to be updated. Note: If the status is set to 'adminStatusDown' and the pimAnycastRPSetLocalRouter object is 'true' (this entry corresponds to the local router), the entire set is invalidated. The Anycast-RP Set is only valid if the local router is a member of the set.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER adminStatusUp(1), adminStatusDown(2)  

etsysPimExtGroupMappingTable 1.3.6.1.4.1.5624.1.2.67.1.2.4
This table provides additional information pertaining to PIM group mapping for Enterasys PIM systems. This table augments the pimGroupMappingTable from RFC 5060.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysPimExtGroupMappingEntry

etsysPimExtGroupMappingEntry 1.3.6.1.4.1.5624.1.2.67.1.2.4.1
An entry (conceptual row) in the etsysPimExtGroupMappingTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysPimExtGroupMappingEntry  

etsysPimExtGroupMappingIsInactive 1.3.6.1.4.1.5624.1.2.67.1.2.4.1.1
Indicates whether this Group Mapping is currently inactive. If this flag is set to 'true' then this group mapping is currently not in use. In other words, no group addresses will be matched to this Group Mapping.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

etsysPimExtNbrStatsTable 1.3.6.1.4.1.5624.1.2.67.1.2.5
This table provides additional information pertaining to PIM neighbor statistics for Enterasys PIM systems. This table augments the pimNeighborTable. Note: If a Neighbor expires and is removed from the pimNeighborTable and is reconnected shortly thereafter, these statistics are reset due to the row deletion. The statistics MAY also reset on receipt of a PIM Hello message with a zero holdtime.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysPimExtNbrStatsEntry

etsysPimExtNbrStatsEntry 1.3.6.1.4.1.5624.1.2.67.1.2.5.1
An entry (conceptual row) in the etsysPimExtNbrStatsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysPimExtNbrStatsEntry  

etsysPimExtNbrStatsNumRecvHello 1.3.6.1.4.1.5624.1.2.67.1.2.5.1.1
The number of valid PIM Hello messages that have been received from this neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrStatsNumRecvJoinPrune 1.3.6.1.4.1.5624.1.2.67.1.2.5.1.2
The number of valid PIM Join/Prune messages that have been received from this neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrStatsNumRecvAssert 1.3.6.1.4.1.5624.1.2.67.1.2.5.1.3
The number of valid PIM Assert messages that have been received from this neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrStatsNumRecvBSM 1.3.6.1.4.1.5624.1.2.67.1.2.5.1.4
The number of valid PIM Bootstrap messages that have been received from this neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrStatsNumErrJoinPrune 1.3.6.1.4.1.5624.1.2.67.1.2.5.1.5
The number of PIM Join/Prune messages that have been received from this neighbor that have contained errors. Note: This does not include messages for which the RP in the message differs from the RP known by the local router, nor does it include (*,G) messages received for SSM groups.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrStatsNumErrAssert 1.3.6.1.4.1.5624.1.2.67.1.2.5.1.6
The number of PIM Assert messages that have been received from this neighbor that have contained errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrStatsNumErrBSM 1.3.6.1.4.1.5624.1.2.67.1.2.5.1.7
The number of PIM Bootstrap messages that have been received from this neighbor that have contained errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtIfStatsTable 1.3.6.1.4.1.5624.1.2.67.1.2.6
This table provides additional information pertaining to PIM interface statistics for Enterasys PIM systems. This table augments the pimInterfaceTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysPimExtIfStatsEntry

etsysPimExtIfStatsEntry 1.3.6.1.4.1.5624.1.2.67.1.2.6.1
An entry (conceptual row) in the etsysPimExtIfStatsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysPimExtIfStatsEntry  

etsysPimExtIfStatsNumSentHello 1.3.6.1.4.1.5624.1.2.67.1.2.6.1.1
The number of PIM Hello messages that have been sent out this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtIfStatsNumSentJoinPrune 1.3.6.1.4.1.5624.1.2.67.1.2.6.1.2
The number of PIM Join/Prune messages that have been sent out this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtIfStatsNumSentAssert 1.3.6.1.4.1.5624.1.2.67.1.2.6.1.3
The number of PIM Assert messages that have been sent out this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtIfStatsNumSentBsm 1.3.6.1.4.1.5624.1.2.67.1.2.6.1.4
The number of PIM Bootstrap Router messages that have been sent out this interface. PIM always multicasts this type of message.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtIfStatsNumErrHello 1.3.6.1.4.1.5624.1.2.67.1.2.6.1.5
The number of PIM Hello messages that have been received on this interface that have contained errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtIfStatsNumRecvUnknownNbr 1.3.6.1.4.1.5624.1.2.67.1.2.6.1.6
The number of PIM Join/Prune, Assert and multicast Bootstrap Router messages that have been received on this interface from a neighbor in which we had not previously received a valid PIM Hello message (and for which etsysPimExtIfP2PNoHellos was 'false'). Bootstrap Router messages which are sent to a unicast address are not included in this count.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtIfStatsNumUnknownHelloOpt 1.3.6.1.4.1.5624.1.2.67.1.2.6.1.7
The number of unknown options that have been received in PIM Hello messages on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrMgrTable 1.3.6.1.4.1.5624.1.2.67.1.2.7
This table provides objects that manipulate the operation of PIM in order to accept additional types of messages. Statistical objects are provided as well.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysPimExtNbrMgrEntry

etsysPimExtNbrMgrEntry 1.3.6.1.4.1.5624.1.2.67.1.2.7.1
An entry (conceptual row) in the etsysPimExtNbrMgrTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysPimExtNbrMgrEntry  

etsysPimExtNbrMgrIndex 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.1
The Internet address version of this Neighbor Manager.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetVersion  

etsysPimExtNbrMgrEnableUnicastMessages 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.2
Indicates whether the PIM Neighbor Manager sends and receives unicast PIM messages. This object MUST only be set to 'false' if the local router will never be an RP for any multicast group, and it will never be the downstream router for any connected source that sends data to any ASM group. This will always be the case if the local router only performs the SSM subset of PIM-SM.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

etsysPimExtNbrMgrAcceptUnicastBsms 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.3
Indicates whether the PIM Neighbor manager accepts PIM Boostrap Messages (BSMs) which are sent as unicast messages. Setting the value of this object to 'false' means that BSMs are ignored if they are sent as unicast messages. This object can only be set to 'true' if the etsysPimExtNbrMgrEnableUnicastMessages object is 'true'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

etsysPimExtNbrMgrNumSentCRPAdvert 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.4
The number of PIM Candidate-RP-Advertisement messages that have been sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrMgrNumSentRegister 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.5
The number of PIM Register messages that have been sent Note: This only includes PIM Register messages forwarded to other members of Anycast-RP sets, and Null-Register messages. It does not include Register-encapsulated data packets sent from the downstream router to the RP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrMgrNumSentRegisterStop 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.6
The number of PIM Register-Stop messages that have been sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrMgrNumRecvCRPAdvert 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.7
The number of valid PIM Candidate-RP Advertisement messages that have been received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrMgrNumRecvRegister 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.8
The number of valid PIM Register messages that have been received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrMgrNumRecvRegisterStop 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.9
The number of valid PIM Register-Stop messages that have been received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrMgrNumErrCRPAdvert 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.10
The number of received PIM Candidate-RP Advertisement messages that have contained errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrMgrNumErrRegister 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.11
The number of received PIM Register messages that have contained errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrMgrNumErrRegisterStop 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.12
The number of received PIM Register-Stop messages that have contained errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrMgrNumRecvIgnoredType 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.13
The number of received PIM messages with a known but unsupported PIM message type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrMgrNumRecvUnknownType 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.14
The number of received PIM messages with an unknown PIM message type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrMgrNumRecvUnknownVer 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.15
The number of received PIM messages with an unknown PIM version.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrMgrNumRecvBadChecksum 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.16
The number of received PIM messages with an incorrect PIM checksum that.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtNbrMgrNumRecvBadLength 1.3.6.1.4.1.5624.1.2.67.1.2.7.1.17
The number of received PIM messages with a length too short to contain a common PIM header.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPimExtTibMgrTable 1.3.6.1.4.1.5624.1.2.67.1.2.8
This table provides objects that manipulate the operation of the PIM Tree Information Base (TIB) Manager in order control the acceptable limits for the TIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysPimExtTibMgrEntry

etsysPimExtTibMgrEntry 1.3.6.1.4.1.5624.1.2.67.1.2.8.1
An entry (conceptual row) in the etsysPimExtTibMgrTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysPimExtTibMgrEntry  

etsysPimExtTibMgrIndex 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.1
The Internet address version of this PIM TIB Manager.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetVersion  

etsysPimExtTibMgrGStateLimit 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.2
The maximum number of groups for which the PIM TIB Manager is allowed to store non-interface specific (*,G) and/or (S,G) state. A value of zero means that there is no limit.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

etsysPimExtTibMgrGStateWarnThold 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.3
The PIM TIB Manager logs an exception if the number of groups for which it is storing non-interface specific (*,G) and/or (S,G) state exceeds this value. A value of zero means that there is no warning threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

etsysPimExtTibMgrGStateStored 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.4
The number of groups for which the PIM TIB Manager is storing non-interface specific (*,G) and/or (S,G) state.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysPimExtTibMgrSGStateLimit 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.5
The maximum number of {source, group} pairs for which the PIM TIB Manager is allowed to store non-interface specific (S,G) state. A value of zero means that there is no limit.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

etsysPimExtTibMgrSGStateWarnThold 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.6
The PIM TIB Manager logs an exception if the number of {source, group} pairs for which it is storing non-interface specific (S,G) state exceeds this value. A value of zero means that there is no warning threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

etsysPimExtTibMgrSGStateStored 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.7
The number of {source, group} pairs for which the PIM TIB Manager is storing non-interface specific (S,G) state.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysPimExtTibMgrStarGIStateLimit 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.8
The maximum number of {group, interface} pairs for which the PIM TIB Manager is allowed to store (*,G,I) state. A value of zero means that there is no limit.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

etsysPimExtTibMgrStarGIStateWarnThold 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.9
The PIM TIB Manager logs an exception if the number of {group, interface} pairs for which it is storing (*,G,I) state exceeds this value. A value of zero means that there is no warning threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

etsysPimExtTibMgrStarGIStateStored 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.10
The number of {group, interface} pairs for which the PIM TIB Manager is storing (*,G,I) state.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysPimExtTibMgrSGIStateLimit 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.11
The maximum number of {source, group, interface} triplets for which the PIM TIB Manager is allowed to store (S,G,I) state. A value of zero means that there is no limit.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

etsysPimExtTibMgrSGIStateWarnThold 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.12
The PIM TIB Manager logs an exception if the number of {source, group, interface} triplets for which it is storing (S,G,I) state exceeds this value. A value of zero means that there is no warning threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

etsysPimExtTibMgrSGIStateStored 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.13
The number of {source, group, interface} triplets for which the PIM TIB Manager is storing (S,G,I) state.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysPimExtTibMgrRegSuppressionTime 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.14
The mean value of the randomized interval during which a downstream router stops Register-encapsulation after receiving a PIM Register-Stop message. This object corresponds to the 'Register_Suppression_Time' defined in PIM-SM [RFC 4601]. Note: Configuring different values for this object for different routers in the PIM domain may lead to incorrect protocol operation.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

etsysPimExtTibMgrRegProbeTime 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.15
The time to wait for a PIM Register-Stop message after sending a PIM Null-Register message, before resuming Register-encapsulation at a downstream router. This object corresponds to the 'Register_Probe_Time' defined in PIM-SM [RFC 4601].
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

etsysPimExtTibMgrKeepalivePeriod 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.16
The amount of time to keep (S,G) state alive in the absence of PIM (S,G) Join messages, (S,G) local membership or (S,G) data packets. This object corresponds to the 'Keepalive_Period' defined in PIM-SM [RFC 4601]. Note: Configuring different values for this object for different routers in the PIM domain may lead to incorrect protocol operation.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

etsysPimExtConformance 1.3.6.1.4.1.5624.1.2.67.3
OBJECT IDENTIFIER    

etsysPimExtGroups 1.3.6.1.4.1.5624.1.2.67.3.1
OBJECT IDENTIFIER    

etsysPimExtCompliances 1.3.6.1.4.1.5624.1.2.67.3.2
OBJECT IDENTIFIER    

etsysPimExtIfGroup 1.3.6.1.4.1.5624.1.2.67.3.1.1
This group defines interface controls for Enterasys PIM systems.
Status: current Access: read-write
OBJECT-GROUP    

etsysPimExtStaticRPGroup 1.3.6.1.4.1.5624.1.2.67.3.1.2
This group defines the static rendezvous point controls for Enterasys PIM systems.
Status: current Access: read-write
OBJECT-GROUP    

etsysPimExtAnycastRPSetGroup 1.3.6.1.4.1.5624.1.2.67.3.1.3
This group defines the anycast rendezvous point controls for Enterasys PIM systems.
Status: current Access: read-write
OBJECT-GROUP    

etsysPimExtGroupMappingGroup 1.3.6.1.4.1.5624.1.2.67.3.1.4
This group defines the group mapping controls for Enterasys PIM systems.
Status: current Access: read-write
OBJECT-GROUP    

etsysPimExtNbrStatsGroup 1.3.6.1.4.1.5624.1.2.67.3.1.5
This group defines the neighbor statistic objects for Enterasys PIM systems.
Status: current Access: read-write
OBJECT-GROUP    

etsysPimExtIfStatsGroup 1.3.6.1.4.1.5624.1.2.67.3.1.6
This group defines the interface statistic objects for Enterasys PIM systems.
Status: current Access: read-write
OBJECT-GROUP    

etsysPimExtNbrMgrGroup 1.3.6.1.4.1.5624.1.2.67.3.1.7
This group defines the neighbor manager objects for Enterasys PIM systems.
Status: current Access: read-write
OBJECT-GROUP    

etsysPimExtTibMgrGroup 1.3.6.1.4.1.5624.1.2.67.3.1.8
This group defines the Tree Information Base (TIB) manager objects for Enterasys PIM systems.
Status: current Access: read-write
OBJECT-GROUP    

etsysPimExtCompliance 1.3.6.1.4.1.5624.1.2.67.3.2.1
The compliance statement for devices that support etsysPimExt.
Status: current Access: read-write
MODULE-COMPLIANCE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor