ENTERASYS-SERVICE-LEVEL-REPORTING-MIB

File: ENTERASYS-SERVICE-LEVEL-REPORTING-MIB.mib (60025 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
SNMP-FRAMEWORK-MIB INET-ADDRESS-MIB ENTERASYS-MIB-NAMES

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
RowStatus StorageType TEXTUAL-CONVENTION
MODULE-COMPLIANCE OBJECT-GROUP SnmpAdminString
InetAddressType InetAddress etsysModules

Defined Types

EtsysSrvcLvlOwnerString  
An OwnerString. The string length is limited to 32 octets.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..32)  

TimeUnit  
A enumerated list of time units.
TEXTUAL-CONVENTION    
  INTEGER year(1), month(2), week(3), day(4), hour(5), second(6), millisecond(7), microsecond(8), nanosecond(9)  

EtsysSrvcLvlStandardMetrics  
Each standard metric is identified below. In order to allow for several metrics to be calculated in a single measure, there is a need to describe in a bit string the metrics to be measured. This textual convention defines a BITS construct that gathers in a bit string a sequence of bits. The bit order corresponds to the order of the metric identifiers in the registry. The first bit (most significant bit) of the string has the index 0. The index 1 corresponds to the first metric of the registry (instantaneousUnidirectionalConnectivity ). Example: One-way-Delay(6) is identified as 6. One-way-Packet-Loss(12) is as 12. A network measure performing both One-way-Delay(6) and One-way-Packet-Loss(12) will be described as '0000001000001000'b, '208'B. Below is a list of defined metrics: reserved (0) Setting this reserved bit has no effect. instantUnidirectionConnectivity (1) The identifier for the Type-P-Instantaneous-Unidirectional- Connectivity metric. REFERENCE RFC2678, section 2. instantBidirectionConnectivity (2) The identifier for the Type-P-Instantaneous-Bidirectional- Connectivity metric. REFERENCE RFC2678, section 3. intervalUnidirectionConnectivity (3) The identifier for the Type-P-Interval-Unidirectional- Connectivity metric. REFERENCE RFC2678, section 4. intervalBidirectionConnectivity (4) The identifier for the Type-P-Interval-Bidirectional- Connectivity metric. REFERENCE RFC2678, section 5. intervalTemporalConnectivity (5) The identifier for the Type-P1-P2-Interval-Temporal- Connectivity metric. REFERENCE RFC2678, section 6. oneWayDelay (6) The identifier for the Type-P-One-way-Delay metric. REFERENCE RFC2679, section 3. oneWayDelayPoissonStream (7) The identifier for the Type-P-One-way-Delay-Poisson-Stream metric. REFERENCE RFC2679, section 4. oneWayDelayPercentile (8) The identifier for the Type-P-One-way-Delay-Percentile metric. REFERENCE RFC2679, section 5.1. oneWayDelayMedian (9) The identifier for the Type-P-One-way-Delay-Median metric. REFERENCE RFC2679, section 5.2. oneWayDelayMinimum (10) The identifier for the Type-P-One-way-Delay-Minimum metric. REFERENCE RFC2679, section 5.3. oneWayDelayInversePercentile (11) The identifier for the Type-P-One-way-Delay-Inverse- Percentile metric. REFERENCE RFC2679, section 5.4. oneWayPacketLoss (12) The identifier for the Type-P-One-way-Packet-Loss metric. REFERENCE RFC2680, section 2. oneWayPacketLossPoissonStream (13) The identifier for the Type-P-One-way-Packet-Loss-Poisson- Stream metric. REFERENCE RFC2680, section 3. oneWayPacketLossAverage (14) The identifier for the Type-P-One-way-Packet-Loss-Average metric. REFERENCE RFC2680, section 4. roundtripDelay (15) The identifier for the Type-P-Round-trip-Delay metric. REFERENCE section 2 of the rfc2681. roundtripDelayPoissonStream (16) The identifier for the Type-P-Round-trip-Delay-Poisson-Stream metric. REFERENCE RFC2681, section 4. roundtripDelayPercentile (17) The identifier for the Type-P-Round-trip-Delay-Percentile metric. REFERENCE RFC2681, section 4.1. roundtripDelayMedian (18) The identifier for the Type-P-Round-trip-Delay-Median metric. REFERENCE RFC2681, section 4.2. roundtripDelayMinimum (19) The identifier for the Type-P-Round-trip-Delay-Minimum metric. REFERENCE RFC2681, section 4.3. roundtripDelayInversePercentile (20) The identifier for the Type-P-Round-trip-Inverse-Percentile metric. REFERENCE RFC2681, section 4.4. oneWayLossDistanceStream (21) The identifier for the Type-P-One-Way-Loss-Distance-Stream metric. REFERENCE RFC3357, section 5.4.1. oneWayLossPeriodStream (22) The identifier for the Type-P-One-Way-Loss-Period-Stream metric. REFERENCE RFC3357, section 5.4.2. oneWayLossNoticeableRate (23) The identifier for the Type-P-One-Way-Loss-Noticeable-Rate metric. REFERENCE RFC3357, section 6.1. oneWayLossPeriodTotal (24) The identifier for the Type-P-One-Way-Loss-Period-Total metric. REFERENCE RFC3357, section 6.2. oneWayLossPeriodLengths (25) The identifier for the Type-P-One-Way-Loss-Period-Lengths metric. REFERENCE RFC3357, section 6.3. oneWayInterLossPeriodLengths (26) The identifier for the Type-P-One-Way-Inter-Loss-Period- Lengths metric. REFERENCE RFC3357, section 6.4. oneWayIpdv (27) The identifier for the Type-P-One-way-ipdv metric. REFERENCE RFC3393, section 2. oneWayIpdvPoissonStream (28) The identifier for the Type-P-One-way-ipdv-Poisson-stream metric. REFERENCE RFC3393, section 3. oneWayIpdvPercentile (29) The identifier for the Type-P-One-way-ipdv-percentile metric. REFERENCE RFC3393, section 4.3. oneWayIpdvInversePercentile (30) The identifier for the Type-P-One-way-ipdv-inverse-percentile metric. REFERENCE RFC3393, section 4.4. oneWayIpdvJitter (31) The identifier for the Type-P-One-way-ipdv-jitter metric. REFERENCE RFC3393, section 4.5. oneWayPeakToPeakIpdv (32) The identifier for the Type-P-One-way-peak-to-peak-ipdv metric. REFERENCE RFC3393, section 4.6. oneWayDelayPeriodicStream (33) The identifier for the Type-P-One-way-Delay-Periodic-Stream metric. REFERENCE RFC3432, section 4. roundtripDelayAverage (34) The identifier for the Type-P-Round-trip-Delay-Average metric. roundtripPacketLoss (35) The identifier for the Type-P-Round-trip-Packet-Loss metric. roundtripPacketLossAverage (36) The identifier for the Type-P-Round-trip-Packet-Loss-Average metric. roundtripIpdv (37) The identifier for the Type-P-Round-trip-ipdv metric.
TEXTUAL-CONVENTION    
  BITS reserved(0), instantUnidirectionConnectivity(1), instantBidirectionConnectivity(2), intervalUnidirectionConnectivity(3), intervalBidirectionConnectivity(4), intervalTemporalConnectivity(5), oneWayDelay(6), oneWayDelayPoissonStream(7), oneWayDelayPercentile(8), oneWayDelayMedian(9), oneWayDelayMinimum(10), oneWayDelayInversePercentile(11), oneWayPacketLoss(12), oneWayPacketLossPoissonStream(13), oneWayPacketLossAverage(14), roundtripDelay(15), roundtripDelayPoissonStream(16), roundtripDelayPercentile(17), roundtripDelayMedian(18), roundtripDelayMinimum(19), roundtripDelayInversePercentile(20), oneWayLossDistanceStream(21), oneWayLossPeriodStream(22), oneWayLossNoticeableRate(23), oneWayLossPeriodTotal(24), oneWayLossPeriodLengths(25), oneWayInterLossPeriodLengths(26), oneWayIpdv(27), oneWayIpdvPoissonStream(28), oneWayIpdvPercentile(29), oneWayIpdvInversePercentile(30), oneWayIpdvJitter(31), oneWayPeakToPeakIpdv(32), oneWayDelayPeriodicStream(33), roundtripDelayAverage(34), roundtripPacketLoss(35), roundtripPacketLossAverage(36), roundtripIpdv(37)  

GMTTimeStamp  
The value at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. field octets contents range ----- ------ -------- ----- 1 1-4 second since 1 Jan 2000 0H00* 0..2^31 - 1 2 5-8 fractional part of the second* 0..2^32 - 1 * the value is in network-byte order The timestamp format is directly inspired from the NTP timestamp format. It differs because it counts the second since 1 Jan 2000 0H00 instead of 1 Jan 1900 0H00. The most significant bit of the part that represents the second is reserved. It will wrap in year 2068 (The NTP timestamp will wrap in year 2036). This bit is set to indicate if the fractional part of the second contains a precision field and a synchronization field. When this bit is not set the resolution is maximal. The maximal resolution is close to 250 picoseconds. The precision of the timestamp is provided in etsysSrvcLvlSystemClockResolution.
TEXTUAL-CONVENTION    
  OCTET STRING Size(8)  

TypeP  
This textual convention is a display string used to describe the protocol encapsulation list of a packet, and is used as the value of the SYNTAX clause for the type of the Src and Dst of a measure. The RFC2895 specifies a macro named PROTOCOL-IDENTIFIER for the definition of protocol identifiers, while its companion document, the RFC2896 defines a set of protocol identifiers. TypeP is defined as a display string. It consists of a list of dot separated protocol names. Each protocol name has been previously defined using the macro PROTOCOL-IDENTIFIER of the RFC 2895. Examples: The RFC2896 defines the protocol identifiers 'ether2', 'ip', 'ipip4', 'udp', 'tcp', 'telnet'... The TypeP of the source address corresponding to telnet is the string 'ip.tcp.telnet'. The TypeP of the source address corresponding to UDP packets sent in an IP tunnel is the string 'ip.ipip4.udp'. Note: A performance measure is active, so generally a TypeP value does not describe the link layer (i.e. ether2...). Valid Internet packets are sent from Src to Dst. Then the choice of the link layer relies on the Internet stack.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..512)  

TypePaddress  
This textual convention is a Display string used to describe the parameters of the protocol encapsulation list of a packet, basically the address. TypePaddress is defined as a display string. It consists in a list of space separated parameter list. Each parameter in the list corresponds to a parameter of a PROTOCOL-IDENTIFIER of the TypeP. Example: The TypeP 'ip.ipip4' has 2 parameters. A valid TypePaddress value is '192.168.1.1 128.2.6.7'.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..512)  

EtsysSrvcLvlMetricEntry  
SEQUENCE    
  etsysSrvcLvlMetricIndex INTEGER
  etsysSrvcLvlMetricCapabilities INTEGER
  etsysSrvcLvlMetricType INTEGER
  etsysSrvcLvlMetricUnit INTEGER
  etsysSrvcLvlMetricDescription SnmpAdminString

EtsysSrvcLvlOwnersEntry  
SEQUENCE    
  etsysSrvcLvlOwnersIndex Integer32
  etsysSrvcLvlOwnersOwner EtsysSrvcLvlOwnerString
  etsysSrvcLvlOwnersGrantedMetrics EtsysSrvcLvlStandardMetrics
  etsysSrvcLvlOwnersQuota Integer32
  etsysSrvcLvlOwnersIpAddressType InetAddressType
  etsysSrvcLvlOwnersIpAddress InetAddress
  etsysSrvcLvlOwnersEmail SnmpAdminString
  etsysSrvcLvlOwnersSMS SnmpAdminString
  etsysSrvcLvlOwnersStatus RowStatus

EtsysSrvcLvlHistoryEntry  
SEQUENCE    
  etsysSrvcLvlHistoryMeasureOwner EtsysSrvcLvlOwnerString
  etsysSrvcLvlHistoryMeasureIndex Integer32
  etsysSrvcLvlHistoryMetricIndex Integer32
  etsysSrvcLvlHistoryIndex Integer32
  etsysSrvcLvlHistorySequence Integer32
  etsysSrvcLvlHistoryTimestamp GMTTimeStamp
  etsysSrvcLvlHistoryValue Integer32

EtsysSrvcLvlNetMeasureEntry  
SEQUENCE    
  etsysSrvcLvlNetMeasureOwner EtsysSrvcLvlOwnerString
  etsysSrvcLvlNetMeasureIndex Integer32
  etsysSrvcLvlNetMeasureName SnmpAdminString
  etsysSrvcLvlNetMeasureMetrics EtsysSrvcLvlStandardMetrics
  etsysSrvcLvlNetMeasureBeginTime GMTTimeStamp
  etsysSrvcLvlNetMeasureDurationUnit TimeUnit
  etsysSrvcLvlNetMeasureDuration Integer32
  etsysSrvcLvlNetMeasureHistorySize Integer32
  etsysSrvcLvlNetMeasureFailureMgmtMode INTEGER
  etsysSrvcLvlNetMeasureResultsMgmt INTEGER
  etsysSrvcLvlNetMeasureSrcTypeP TypeP
  etsysSrvcLvlNetMeasureSrc TypePaddress
  etsysSrvcLvlNetMeasureDstTypeP TypeP
  etsysSrvcLvlNetMeasureDst TypePaddress
  etsysSrvcLvlNetMeasureTxMode INTEGER
  etsysSrvcLvlNetMeasureTxPacketRateUnit TimeUnit
  etsysSrvcLvlNetMeasureTxPacketRate Integer32
  etsysSrvcLvlNetMeasureDevtnOrBurstSize Integer32
  etsysSrvcLvlNetMeasureMedOrIntBurstSize Integer32
  etsysSrvcLvlNetMeasureLossTimeout Integer32
  etsysSrvcLvlNetMeasureL3PacketSize Integer32
  etsysSrvcLvlNetMeasureDataPattern OCTET STRING
  etsysSrvcLvlNetMeasureMap SnmpAdminString
  etsysSrvcLvlNetMeasureSingletons Integer32
  etsysSrvcLvlNetMeasureOperState INTEGER

EtsysSrvcLvlAggrMeasureEntry  
SEQUENCE    
  etsysSrvcLvlAggrMeasureOwner EtsysSrvcLvlOwnerString
  etsysSrvcLvlAggrMeasureIndex Integer32
  etsysSrvcLvlAggrMeasureName SnmpAdminString
  etsysSrvcLvlAggrMeasureMetrics EtsysSrvcLvlStandardMetrics
  etsysSrvcLvlAggrMeasureBeginTime GMTTimeStamp
  etsysSrvcLvlAggrMeasureAggrPeriodUnit TimeUnit
  etsysSrvcLvlAggrMeasureAggrPeriod Integer32
  etsysSrvcLvlAggrMeasureDurationUnit TimeUnit
  etsysSrvcLvlAggrMeasureDuration Integer32
  etsysSrvcLvlAggrMeasureHistorySize Integer32
  etsysSrvcLvlAggrMeasureStorageType StorageType
  etsysSrvcLvlAggrMeasureHistoryOwner EtsysSrvcLvlOwnerString
  etsysSrvcLvlAggrMeasureHistoryOwnerIndex Integer32
  etsysSrvcLvlAggrMeasureHistoryMetric Integer32
  etsysSrvcLvlAggrMeasureAdminState INTEGER
  etsysSrvcLvlAggrMeasureMap SnmpAdminString
  etsysSrvcLvlAggrMeasureResultsMgmt INTEGER
  etsysSrvcLvlAggrMeasureStatus RowStatus

Defined Values

etsysServiceLevelReportingMIB 1.3.6.1.4.1.5624.1.2.39
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it specifies the objects used for managing the results of the service level metrics measurements.
MODULE-IDENTITY    

etsysSrvcLvlConfigObjects 1.3.6.1.4.1.5624.1.2.39.1
OBJECT IDENTIFIER    

etsysSrvcLvlSystem 1.3.6.1.4.1.5624.1.2.39.1.1
OBJECT IDENTIFIER    

etsysSrvcLvlOwners 1.3.6.1.4.1.5624.1.2.39.1.2
OBJECT IDENTIFIER    

etsysSrvcLvlHistory 1.3.6.1.4.1.5624.1.2.39.1.3
OBJECT IDENTIFIER    

etsysSrvcLvlMeasure 1.3.6.1.4.1.5624.1.2.39.1.4
OBJECT IDENTIFIER    

etsysSrvcLvlSystemTime 1.3.6.1.4.1.5624.1.2.39.1.1.1
The current time of the system.
Status: current Access: read-only
OBJECT-TYPE    
  GMTTimeStamp  

etsysSrvcLvlSystemClockResolution 1.3.6.1.4.1.5624.1.2.39.1.1.2
etsysSrvcLvlSystemClockResolution provides the precision of the clock used for the measures . The unit is the picosecond. For example, the clock on an old Unix host might advance only once every msec, and thus have a resolution of 1 msec. So its resolution is 1,000,000,000 picosecond and the value of etsysSrvcLvlSystemClockResolution is 1000000000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

etsysSrvcLvlMetricTable 1.3.6.1.4.1.5624.1.2.39.1.1.3
This table is mandatory. It describes the current implementation. Each defined metric must be described in the table. etsysSrvcLvlMetricTable content is read only.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysSrvcLvlMetricEntry

etsysSrvcLvlMetricEntry 1.3.6.1.4.1.5624.1.2.39.1.1.3.1
An entry describes the static capabilities of a metric implementation.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysSrvcLvlMetricEntry  

etsysSrvcLvlMetricIndex 1.3.6.1.4.1.5624.1.2.39.1.1.3.1.1
etsysSrvcLvlMetricIndex defines an unambiguous index for each standardized metric. It identifies a metric. Its value is defined above. This value is the same in any implementation of the ENTERASYS-SERVICE-LEVEL-REPORTING-MIB. See EtsysSrvcLvlStandardMetrics for description of the metrics. Example: onewayPacketLossAverage is defined as the 14. Consequently the index of the metric onewayPacketLossAverage in the EtsysSrvcLvlMetricTable will always be '14'
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER instantUnidirectionConnectivity(1), instantBidirectionConnectivity(2), intervalUnidirectionConnectivity(3), intervalBidirectionConnectivity(4), intervalTemporalConnectivity(5), oneWayDelay(6), oneWayDelayPoissonStream(7), oneWayDelayPercentile(8), oneWayDelayMedian(9), oneWayDelayMinimum(10), oneWayDelayInversePercentile(11), oneWayPacketLoss(12), oneWayPacketLossPoissonStream(13), oneWayPacketLossAverage(14), roundtripDelay(15), roundtripDelayPoissonStream(16), roundtripDelayPercentile(17), roundtripDelayMedian(18), roundtripDelayMinimum(19), roundtripDelayInversePercentile(20), oneWayLossDistanceStream(21), oneWayLossPeriodStream(22), oneWayLossNoticeableRate(23), oneWayLossPeriodTotal(24), oneWayLossPeriodLengths(25), oneWayInterLossPeriodLengths(26), oneWayIpdv(27), oneWayIpdvPoissonStream(28), oneWayIpdvPercentile(29), oneWayIpdvInversePercentile(30), oneWayIpdvJitter(31), oneWayPeakToPeakIpdv(32), oneWayDelayPeriodicStream(33), roundtripDelayAverage(34), roundtripPacketLoss(35), roundtripPacketLossAverage(36), roundtripIpdv(37)  

etsysSrvcLvlMetricCapabilities 1.3.6.1.4.1.5624.1.2.39.1.1.3.1.2
A value of notImplemented implies the metric is not implemented. A value of implemented implies the metric is implemented.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notImplemented(0), implemented(1)  

etsysSrvcLvlMetricType 1.3.6.1.4.1.5624.1.2.39.1.1.3.1.3
Indicates the metric type, whether it is network or aggregated
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER network(0), aggregated(1)  

etsysSrvcLvlMetricUnit 1.3.6.1.4.1.5624.1.2.39.1.1.3.1.4
The unit used in the current entity for the results of the measurement of this metric.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noUnit(0), second(1), millisecond(2), microsecond(3), nanosecond(4), percentage(5), packet(6), byte(7), kilobyte(8), megabyte(9)  

etsysSrvcLvlMetricDescription 1.3.6.1.4.1.5624.1.2.39.1.1.3.1.5
A textual description of the metric implementation following the exact name of this metric in the registry. For example: oneWayDelay: text .
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

etsysSrvcLvlOwnersTable 1.3.6.1.4.1.5624.1.2.39.1.2.1
A management entity wishing to create and activate remote EtsysSrvcLvl measurements in an agent must previously be registered in the etsysSrvcLvlOwnersTable. etsysSrvcLvlOwnersTable content is read-create. It contains at least the owner 'monitor'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysSrvcLvlOwnersEntry

etsysSrvcLvlOwnersEntry 1.3.6.1.4.1.5624.1.2.39.1.2.1.1
The description of the resources granted to an SNMP application. For example, an instance of etsysSrvcLvlOwnersOwner with an EtsysSrvcLvlOwnerString 'acme', which represents the 14th owner created in etsysSrvcLvlOwnersTable would be named etsysSrvcLvlOwnersEntryOwner.14. Notes: The etsysSrvcLvlOwnersIndex value is a local index managed directly by the agent. The management application must poll to get the next available index value. It is not used in anyway in other tables.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysSrvcLvlOwnersEntry  

etsysSrvcLvlOwnersIndex 1.3.6.1.4.1.5624.1.2.39.1.2.1.1.1
An arbitrary index that identifies an entry in the owners table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

etsysSrvcLvlOwnersOwner 1.3.6.1.4.1.5624.1.2.39.1.2.1.1.2
The owner described by this entry.
Status: current Access: read-create
OBJECT-TYPE    
  EtsysSrvcLvlOwnerString  

etsysSrvcLvlOwnersGrantedMetrics 1.3.6.1.4.1.5624.1.2.39.1.2.1.1.3
Defines the metrics granted to an owner for which measurements can be performed.
Status: current Access: read-create
OBJECT-TYPE    
  EtsysSrvcLvlStandardMetrics  

etsysSrvcLvlOwnersQuota 1.3.6.1.4.1.5624.1.2.39.1.2.1.1.4
The maximum number of records that this owner may have in the history table.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

etsysSrvcLvlOwnersIpAddressType 1.3.6.1.4.1.5624.1.2.39.1.2.1.1.5
The IP address type of the management entity corresponding to this owner. InetAddressType is restricted to ipv4(1),ipv6(2)and dns(16).
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

etsysSrvcLvlOwnersIpAddress 1.3.6.1.4.1.5624.1.2.39.1.2.1.1.6
The IP address of the management entity corresponding to this owner.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(1..128)  

etsysSrvcLvlOwnersEmail 1.3.6.1.4.1.5624.1.2.39.1.2.1.1.7
The email address of the management entity corresponding to this owner.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString  

etsysSrvcLvlOwnersSMS 1.3.6.1.4.1.5624.1.2.39.1.2.1.1.8
The SMS phone number of the management entity corresponding to this owner.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString  

etsysSrvcLvlOwnersStatus 1.3.6.1.4.1.5624.1.2.39.1.2.1.1.9
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

etsysSrvcLvlHistoryTable 1.3.6.1.4.1.5624.1.2.39.1.3.1
The table containing the measurement results.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysSrvcLvlHistoryEntry

etsysSrvcLvlHistoryEntry 1.3.6.1.4.1.5624.1.2.39.1.3.1.1
An etsysSrvcLvlHistoryEntry entry is one of the results of a measure identified by etsysSrvcLvlHistoryMeasureOwner, etsysSrvcLvlHistoryMeasureIndex, etsysSrvcLvlHistoryMetricIndex and etsysSrvcLvlHistoryIndex. In the index : + etsysSrvcLvlHistoryMeasureOwner identifies the owner of the measure + etsysSrvcLvlHistoryMeasureIndex identifies the measure in the owner namespace + etsysSrvcLvlHistoryMetricIndex identifies the metric measured by the measure. The metric is described in the corresponding entry of the n etsysSrvcLvlMetricTable + etsysSrvcLvlHistoryIndex is the local index of the result on the history table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysSrvcLvlHistoryEntry  

etsysSrvcLvlHistoryMeasureOwner 1.3.6.1.4.1.5624.1.2.39.1.3.1.1.1
The owner of the measure that produced this result.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysSrvcLvlOwnerString  

etsysSrvcLvlHistoryMeasureIndex 1.3.6.1.4.1.5624.1.2.39.1.3.1.1.2
The index (in owner's namespace) of the measure that produced this result.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

etsysSrvcLvlHistoryMetricIndex 1.3.6.1.4.1.5624.1.2.39.1.3.1.1.3
etsysSrvcLvlHistoryMetricIndex identifies the metric measured by the measure. The metric is described in the corresponding entry of the etsysSrvcLvlMetricTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

etsysSrvcLvlHistoryIndex 1.3.6.1.4.1.5624.1.2.39.1.3.1.1.4
A local index that identifies a result in the history table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

etsysSrvcLvlHistorySequence 1.3.6.1.4.1.5624.1.2.39.1.3.1.1.5
etsysSrvcLvlHistorySequence is the sequence index of the measurement results for a metric. Network metrics: It's the sequence index of a measurement packet. Typically, it identifies the order of the packet in the stream of packets sends by the source. Aggregated metrics: It is the sequence index of the computed aggregated metric result.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

etsysSrvcLvlHistoryTimestamp 1.3.6.1.4.1.5624.1.2.39.1.3.1.1.6
The timestamp when the measurement occurred.
Status: current Access: read-only
OBJECT-TYPE    
  GMTTimeStamp  

etsysSrvcLvlHistoryValue 1.3.6.1.4.1.5624.1.2.39.1.3.1.1.7
The observed value of the measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

etsysSrvcLvlNetMeasureTable 1.3.6.1.4.1.5624.1.2.39.1.4.1
An entry is a measurement that performs network measures and provides results. It performs several metric measurements per packet exchange. Each step of a measure produces a singleton result per metric. The time of the measurement and the value of the metric are saved in the etsysSrvcLvlHistoryTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysSrvcLvlNetMeasureEntry

etsysSrvcLvlNetMeasureEntry 1.3.6.1.4.1.5624.1.2.39.1.4.1.1
The EtsysSrvcLvlNetMeasureTable is mandatory. The etsysSrvcLvlNetMeasureMetrics is set to a list of metrics to be computed from the same raw packet exchange. Each step of measurement delivers a singleton per chosen metric. Results are timestamped and saved in the etsysSrvcLvlHistoryTable. The etsysSrvcLvlNetMeasureTable typical usage consists in providing network measure indices in order to allow aggregated measures to perform aggregation on the results of network measures.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysSrvcLvlNetMeasureEntry  

etsysSrvcLvlNetMeasureOwner 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.1
The owner of the network measurement.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysSrvcLvlOwnerString  

etsysSrvcLvlNetMeasureIndex 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.2
The index (in owner's namespace) of the network measure.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

etsysSrvcLvlNetMeasureName 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.3
The name of the metric instance. It illustrates the specificity of the metric and includes the metric and the TypeP. Example: IP-TCP-HTTP-One-way-Delay: free text
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString  

etsysSrvcLvlNetMeasureMetrics 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.4
Defines the metrics to compute within this measure. ONLY network metrics of the same type are allowed in this field. A measure may be configured for the result of different metric singletons to be archived in the etsysSrvcLvlHistoryTable. The etsysSrvcLvlMetricIndex of the created result has the value of the bit index of the corresponding etsysSrvcLvlMeasureMetrics as explained above in the etsysSrvcLvlMetricIndex definition. Example: A measure asking for One-way-Delay(6) and One-way-Packet-Loss(12) generated a flow of singletons which are logged in the etsysSrvcLvlHistoryTable. The singletons created for the One-way-Delay measure have a value of etsysSrvcLvlMetricIndex of 6 while the created singletons for the One-way-Packet-Loss measure have a value of etsysSrvcLvlMetricIndex of 12. One measure may perform simultaneously either several network metrics either several aggregated metrics
Status: current Access: read-write
OBJECT-TYPE    
  EtsysSrvcLvlStandardMetrics  

etsysSrvcLvlNetMeasureBeginTime 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.5
Specifies the time at which the measurement begins.
Status: current Access: read-write
OBJECT-TYPE    
  GMTTimeStamp  

etsysSrvcLvlNetMeasureDurationUnit 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.6
Specifies the measurement duration unit.
Status: current Access: read-write
OBJECT-TYPE    
  TimeUnit  

etsysSrvcLvlNetMeasureDuration 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.7
Specifies the measurement duration.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

etsysSrvcLvlNetMeasureHistorySize 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.8
Specifies the maximum number of results saved for each metric of this measure. Overflow condition will be managed by the object etsysSrvcLvlNetMeasureResultsMgmt.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

etsysSrvcLvlNetMeasureFailureMgmtMode 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.9
This object defines whether this row is discarded on failure. 'auto' the failure is handled automatically depending on the implementation. 'manual' the entry should be discarded manually. 'discarded' the entry is discarded all the time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), manual(2), discarded(3)  

etsysSrvcLvlNetMeasureResultsMgmt 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.10
Action to take when the log is full. The user may choose to either wrap, in which case the agent writes over existing records. The user may choose to suspend writing to the log in the event that he wishes to archive the data. The delete action causes the agent to begin to write in the log, and assumes the data has been cleared. This object indicates the way the measurement results are managed when the owner quota has been exceeded: 'wrap' continue the measurement and erase the older entries in the history. 'suspend' stop the measure and keep the results in the history. 'delete' remove the results from the history.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wrap(1), suspend(2), delete(3)  

etsysSrvcLvlNetMeasureSrcTypeP 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.11
Defines the type P of the source address of the packets sent by the measure.
Status: current Access: read-write
OBJECT-TYPE    
  TypeP  

etsysSrvcLvlNetMeasureSrc 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.12
Specifies the address of the source of the measure. It is represented as a list of parameters corresponding to those of the PROTOCOL IDENTIFIER sets in etsysSrvcLvlNetMeasureSrcTypeP.
Status: current Access: read-write
OBJECT-TYPE    
  TypePaddress  

etsysSrvcLvlNetMeasureDstTypeP 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.13
Defines the type P of the destination address of the packets sent by the measure.
Status: current Access: read-write
OBJECT-TYPE    
  TypeP  

etsysSrvcLvlNetMeasureDst 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.14
Specifies the address of the destination of the measure. It is represented as a list of parameters corresponding to those of the PROTOCOL IDENTIFIER set in etsysSrvcLvlNetMeasureDstTypeP.
Status: current Access: read-write
OBJECT-TYPE    
  TypePaddress  

etsysSrvcLvlNetMeasureTxMode 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.15
The transmit mode used to send the packets: 'other' The rule used to send the packets is unknown. 'periodic' Packets are sent periodically at etsysSrvcLvlNetMeasureTxPacketRate rate. 'poisson' Packets are sent using a Poisson law, the median is the value of etsysSrvcLvlNetMeasureMedOrIntBurstSize, the deviation is etsysSrvcLvlNetMeasureDevtnOrBurstSize. 'multiburst' Packets are sent bursty at etsysSrvcLvlNetMeasureTxPacketRate. The size of the burst is made of etsysSrvcLvlNetMeasureDevtnOrBurstSize packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(0), periodic(1), poisson(2), multiburst(3)  

etsysSrvcLvlNetMeasureTxPacketRateUnit 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.16
The packet rate unit used to send the packets.
Status: current Access: read-write
OBJECT-TYPE    
  TimeUnit  

etsysSrvcLvlNetMeasureTxPacketRate 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.17
The rate the packets are sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

etsysSrvcLvlNetMeasureDevtnOrBurstSize 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.18
Indicates the average number of packets per seconds sent using a poisson law.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

etsysSrvcLvlNetMeasureMedOrIntBurstSize 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.19
According to the transmit mode, this value indicates the average number of packets per seconds sent using a poisson law, or the number of packets to wait between consecutive bursts.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

etsysSrvcLvlNetMeasureLossTimeout 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.20
Specifies the delay after which the packet is considered lost by the sink.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

etsysSrvcLvlNetMeasureL3PacketSize 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.21
Specifies the size of the packets counted at the IP network layer in regards to the TypeP definition. Example: For a TypeP 'ip ipip4' the L3 size will be the size of the packet at ipip4 level.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

etsysSrvcLvlNetMeasureDataPattern 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.22
The pattern used to fill the payload of the packet.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

etsysSrvcLvlNetMeasureMap 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.23
An administrative name of a network management map to which the measure belongs.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString  

etsysSrvcLvlNetMeasureSingletons 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.24
Reports the number of singletons performed per metric by the measure since the beginning of the measure. This parameters is required for aggregation.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

etsysSrvcLvlNetMeasureOperState 1.3.6.1.4.1.5624.1.2.39.1.4.1.1.25
Reports the operational status of the network measure.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), running(1), stopped(2)  

etsysSrvcLvlAggrMeasureTable 1.3.6.1.4.1.5624.1.2.39.1.4.2
An aggregated measure summarizes the results of previous network or aggregated measures. The results may be saved in the etsysSrvcLvlHistoryTable. Each step of the calculation for the measure produces a singleton result per metric.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysSrvcLvlAggrMeasureEntry

etsysSrvcLvlAggrMeasureEntry 1.3.6.1.4.1.5624.1.2.39.1.4.2.1
Typically the configuration operation sets the value of the EtsysSrvcLvlAggrMeasureEntry. etsysSrvcLvlAggrMeasureTable is mandatory. The etsysSrvcLvlAggrMeasureMetrics defines the metric to compute. The results of the measure to summarize are identified by: + etsysSrvcLvlAggrMeasureHistoryOwner, + etsysSrvcLvlAggrMeasureHistoryOwnerIndex and + etsysSrvcLvlAggrMeasureHistoryMetric The aggregated task starts at etsysSrvcLvlAggrMeasureBeginTime and ends after etsysSrvcLvlAggrMeasureDuration. An aggregated result is performed and saved in the etsysSrvcLvlHistoryTable for each etsysSrvcLvlAggrMeasureAggrPeriod.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysSrvcLvlAggrMeasureEntry  

etsysSrvcLvlAggrMeasureOwner 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.1
The owner who has configured this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysSrvcLvlOwnerString  

etsysSrvcLvlAggrMeasureIndex 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.2
The index (in owner's namespace) of the measure. The value is managed by the owner.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

etsysSrvcLvlAggrMeasureName 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.3
The name of the instance of the metric. It illustrates the specificity of the metric and includes the metric and the typeP. example: IP-port-HTTP-connectivity
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString  

etsysSrvcLvlAggrMeasureMetrics 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.4
Defines the metrics to compute within this aggregated measure. ONLY aggregated metrics of the same type are allowed in this field. A measure may be configured for the result of different metric singletons to be archived in the etsysSrvcLvlHistoryTable. The etsysSrvcLvlMetricIndex of the created result has the value of the bit index of the corresponding etsysSrvcLvlAggrMeasureMetrics as explained above in the etsysSrvcLvlMetricIndex definition. Example: A measure asking for One-way-Delay(6) and One-way-Packet-Loss(12) generated a flow of singletons which are logged in the etsysSrvcLvlHistoryTable. The singletons created for the One-way-Delay measure have a value of etsysSrvcLvlMetricIndex of 6 while the created singletons for the One-way-Packet-Loss measure have a value of etsysSrvcLvlMetricIndex of 12.
Status: current Access: read-create
OBJECT-TYPE    
  EtsysSrvcLvlStandardMetrics  

etsysSrvcLvlAggrMeasureBeginTime 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.5
Specifies the time at which the aggregated measure starts.
Status: current Access: read-create
OBJECT-TYPE    
  GMTTimeStamp  

etsysSrvcLvlAggrMeasureAggrPeriodUnit 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.6
Specifies the unit of the aggregated measure period.
Status: current Access: read-create
OBJECT-TYPE    
  TimeUnit  

etsysSrvcLvlAggrMeasureAggrPeriod 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.7
Specifies the amount of time between 2 measurement action intervals. The action is specific to the semantic of the measure. They are performed periodically on a sequence of results of other measures. The period corresponds to the interval between two successive computations of the metric. The value of etsysSrvcLvlHistoryTimestamp result of a aggregated metric computed corresponds to the value of the etsysSrvcLvlHistoryTimestamp of the last metric result of the sequence used in to compute the aggregated metric.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

etsysSrvcLvlAggrMeasureDurationUnit 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.8
Specifies the unit of the measure duration.
Status: current Access: read-create
OBJECT-TYPE    
  TimeUnit  

etsysSrvcLvlAggrMeasureDuration 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.9
Specifies the duration of the measure.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

etsysSrvcLvlAggrMeasureHistorySize 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.10
Specifies the maximum number of results saved for each metric of this measure. Overflow condition will be managed by the object etsysSrvcLvlAggrMeasureResultsMgmt.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

etsysSrvcLvlAggrMeasureStorageType 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.11
This object defines whether this row and the corresponding entry in the etsysSrvcLvlNetMeasureTable is kept in volatile storage and lost upon reboot or if this row is backed up by non-volatile or permanent storage. Possible values are: other(1), volatile(2), nonVolatile(3), permanent(4), readOnly(5).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

etsysSrvcLvlAggrMeasureResultsMgmt 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.12
This object displays the way the history of the aggregated measure is managed. 'wrap' continue the measure and erase the older entries in the history. 'suspend' stop the measure and keep the results in the history.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER wrap(1), suspend(2)  

etsysSrvcLvlAggrMeasureHistoryOwner 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.13
The owner of the measure to summarize.
Status: current Access: read-create
OBJECT-TYPE    
  EtsysSrvcLvlOwnerString  

etsysSrvcLvlAggrMeasureHistoryOwnerIndex 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.14
The index (in owner's namespace) of the measure to summarize.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

etsysSrvcLvlAggrMeasureHistoryMetric 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.15
The metric of the measure to summarize.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

etsysSrvcLvlAggrMeasureAdminState 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.16
This object controls the activity of the aggregated measure. 'start' The aggregated measure is started. 'stop' The aggregated measure is stopped.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER start(0), stop(1)  

etsysSrvcLvlAggrMeasureMap 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.17
This object allows for classification of the measure. It is typically the name of an administrative map.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString  

etsysSrvcLvlAggrMeasureStatus 1.3.6.1.4.1.5624.1.2.39.1.4.2.1.18
The status of this table entry. Once the entry status is set to active, the associate entry cannot be modified. The creation of an aggregated measure forced the creation of the corresponding entry in etsysSrvcLvlNetMeasureTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

etsysSrvcLvlReportingConformance 1.3.6.1.4.1.5624.1.2.39.2
OBJECT IDENTIFIER    

etsysSrvcLvlReportingGroups 1.3.6.1.4.1.5624.1.2.39.2.1
OBJECT IDENTIFIER    

etsysSrvcLvlReportingCompliances 1.3.6.1.4.1.5624.1.2.39.2.2
OBJECT IDENTIFIER    

etsysSrvcLvlSystemGroup 1.3.6.1.4.1.5624.1.2.39.2.1.1
The System Group.
Status: current Access: read-create
OBJECT-GROUP    

etsysSrvcLvlOwnersGroup 1.3.6.1.4.1.5624.1.2.39.2.1.2
The Owners Group.
Status: current Access: read-create
OBJECT-GROUP    

etsysSrvcLvlHistoryGroup 1.3.6.1.4.1.5624.1.2.39.2.1.3
The History Group.
Status: current Access: read-create
OBJECT-GROUP    

etsysSrvcLvlMeasureGroup 1.3.6.1.4.1.5624.1.2.39.2.1.4
The Network and Aggregate Measures Group.
Status: current Access: read-create
OBJECT-GROUP    

etsysSrvcLvlReportingCompliance 1.3.6.1.4.1.5624.1.2.39.2.2.1
The compliance statement for devices that support the etsysSrvcLvlReportingMib.
Status: current Access: read-create
MODULE-COMPLIANCE