ENTERASYS-SYSLOG-CLIENT-MIB

File: ENTERASYS-SYSLOG-CLIENT-MIB.mib (31472 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC INET-ADDRESS-MIB
SNMPv2-CONF SNMP-FRAMEWORK-MIB ENTERASYS-MIB-NAMES

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Counter32 Gauge32 RowStatus
TEXTUAL-CONVENTION TimeStamp InetAddressType
InetAddress MODULE-COMPLIANCE OBJECT-GROUP
SnmpAdminString etsysModules

Defined Types

SyslogUdpPort  
The UDP port number the client is using to send requests to this server. 514 is the IANA assigned port number for syslog.
TEXTUAL-CONVENTION    
  Unsigned32  

SyslogFacility  
This textual convention maps out to the facilities available for syslog messages.
TEXTUAL-CONVENTION    
  INTEGER local0(16), local1(17), local2(18), local3(19), local4(20), local5(21), local6(22), local7(23)  

SyslogSeverity  
This textual convention maps out to the severity levels of syslog messages. The syslog protocol uses the values 0 (emergency), to 7 (debug).
TEXTUAL-CONVENTION    
  INTEGER emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8)  

EtsysSyslogServerEntry  
SEQUENCE    
  etsysSyslogServerIndex Unsigned32
  etsysSyslogServerDescription SnmpAdminString
  etsysSyslogServerAddressType InetAddressType
  etsysSyslogServerAddress InetAddress
  etsysSyslogServerUdpPort SyslogUdpPort
  etsysSyslogServerFacility SyslogFacility
  etsysSyslogServerSeverity SyslogSeverity
  etsysSyslogServerMessagesIgnored Counter32
  etsysSyslogServerRowStatus RowStatus

EtsysSyslogApplicationEntry  
SEQUENCE    
  etsysSyslogApplicationIndex Unsigned32
  etsysSyslogApplicationDescription SnmpAdminString
  etsysSyslogApplicationMnemonic SnmpAdminString
  etsysSyslogApplicationSeverity SyslogSeverity
  etsysSyslogApplicationAllowedServers BITS

Defined Values

etsysSyslogClientMIB 1.3.6.1.4.1.5624.1.2.14
This MIB module defines a portion of the SNMP enterprise MIBs under the Enterasys enterprise OID pertaining to the configuration of the generation of Syslog compatible diagnostic messages for Enterasys products.
MODULE-IDENTITY    

etsysSyslogClient 1.3.6.1.4.1.5624.1.2.14.1
OBJECT IDENTIFIER    

etsysSyslogServer 1.3.6.1.4.1.5624.1.2.14.2
OBJECT IDENTIFIER    

etsysSyslogApplication 1.3.6.1.4.1.5624.1.2.14.3
OBJECT IDENTIFIER    

etsysSyslogNotification 1.3.6.1.4.1.5624.1.2.14.5
OBJECT IDENTIFIER    

etsysSyslogClientMessages 1.3.6.1.4.1.5624.1.2.14.1.1
The number of messages successfully delivered to the upstream side of the syslog client software for processing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysSyslogClientMessagesDropped 1.3.6.1.4.1.5624.1.2.14.1.2
The number of messages unable to be queued to the downstream side of the syslog client software for transmitting.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysSyslogClientLastMessageTime 1.3.6.1.4.1.5624.1.2.14.1.3
The sysUpTime of the last attempt, successful or otherwise, to queue a message to the downstream side of the syslog client software.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

etsysSyslogClientControl 0.1.3.6.1.4.1.5624.1.2.14.1.4
A list of attributes to control the operation of the syslog client.
Status: current Access: read-write
OBJECT-TYPE    
  BITS etsysSyslogClientControlConsoleLogging(0), etsysSyslogClientControlPersistentLogging(1), etsysSyslogClientControlSecurePersistentLogging(2)  

etsysSyslogClientSecureMessagesDropped 1.3.6.1.4.1.5624.1.2.14.1.5
The number of messages unable to be queued to the downstream side of the syslog client software for transmitting to a secure file.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysSyslogServerMaxEntries 1.3.6.1.4.1.5624.1.2.14.2.1
The maximum number of entries allowed in the etsysSyslogServerTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8  

etsysSyslogServerNumEntries 1.3.6.1.4.1.5624.1.2.14.2.2
The number of entries currently in the etsysSyslogServerTable.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

etsysSyslogServerTableNextAvailableIndex 1.3.6.1.4.1.5624.1.2.14.2.3
This object indicates the numerically lowest available index within this entity, which may be used for the value of etsysSyslogServerIndex in the creation of a new entry in the etsysSyslogServerTable. An index is considered available if the index value falls within the range of 1 to 8 and is not being used to index an existing entry in the etsysSyslogServerTable contained within this entity. A value of zero indicates that all of the entries in the etsysSyslogServerTable are currently in use. This value should only be considered a guideline for management creation of etsysSyslogServerEntries, there is no requirement on management to create entries based upon this index value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..8  

etsysSyslogServerTable 1.3.6.1.4.1.5624.1.2.14.2.4
A table containing Syslog server information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysSyslogServerEntry

etsysSyslogServerEntry 1.3.6.1.4.1.5624.1.2.14.2.4.1
Defines the information to generate syslog messages to an aggregating agent or server. Entries within this table with an access level of read- create MUST be considered non-volatile and MUST be maintained across entity resets.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysSyslogServerEntry  

etsysSyslogServerIndex 1.3.6.1.4.1.5624.1.2.14.2.4.1.1
A unique arbitrary identifier for this syslog server.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..8  

etsysSyslogServerDescription 1.3.6.1.4.1.5624.1.2.14.2.4.1.2
Administratively assigned textual description of this syslog server.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(1..64)  

etsysSyslogServerAddressType 1.3.6.1.4.1.5624.1.2.14.2.4.1.3
The type of Internet address by which the Syslog server is specified in etsysSyslogServerAddress. Not all address types may be supported.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

etsysSyslogServerAddress 1.3.6.1.4.1.5624.1.2.14.2.4.1.4
The Internet address for the Syslog message server. The use of DNS domain names is discouraged, and agent support for them is optional. Deciding when, and how often, to resolve them is an issue. Not resolving them often enough means you might lose synchronization with the associated entry in the DNS server, and resolving them too often might leave you without access to the Syslog server during critical network events.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

etsysSyslogServerUdpPort 1.3.6.1.4.1.5624.1.2.14.2.4.1.5
The UDP port number the client is using to send requests to this server. If an entity only supports sending messages using a single UDP port to all servers then this may optionally be implemented read-only, in which case the current value of etsysSyslogServerDefaultUdpPort will be used.
Status: current Access: read-create
OBJECT-TYPE    
  SyslogUdpPort  

etsysSyslogServerFacility 1.3.6.1.4.1.5624.1.2.14.2.4.1.6
The syslog facility (local0-local7) that will be encoded in messages sent to this server. If an entity only supports encoding a single facility in all messages to all servers then this may optionally be implemented read-only, in which case the current value of etsysSyslogServerDefaultFacility will be used.
Status: current Access: read-create
OBJECT-TYPE    
  SyslogFacility  

etsysSyslogServerSeverity 1.3.6.1.4.1.5624.1.2.14.2.4.1.7
The maximum severity level of the messages that should be forwarded to the syslog server. The higher the level, the lower the severity. If an entity only supports filtering based on a single severity level for all servers then this may optionally be implemented read-only, in which case the current value of etsysSyslogServerDefaultSeverity will be used.
Status: current Access: read-create
OBJECT-TYPE    
  SyslogSeverity  

etsysSyslogServerMessagesIgnored 1.3.6.1.4.1.5624.1.2.14.2.4.1.8
This is a count of messages not sent to this server because the severity level of the message was above etsysSyslogServerSeverity, the higher the level, the lower the severity.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysSyslogServerRowStatus 1.3.6.1.4.1.5624.1.2.14.2.4.1.9
This object allows for the dynamic creation and deletion of entries within the etsysSyslogServerTable as well as the activation and deactivation of these entries. When this object's value is set to notInService(2) this server will not be sent any messages, nor will any of its counters be incremented. The agent should not delete a row, except in the case of the loss of persistent storage. Refer to the RowStatus convention for further details on the behavior of this object.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

etsysSyslogServerDefaultUdpPort 1.3.6.1.4.1.5624.1.2.14.2.5
The default UDP port number that the managed entity is using to send syslog messages. This value will be used as the default value for etsysSyslogServerUdpPort when creating rows in the etsysSyslogServerTable and either: 1.) no value is specified for etsysSyslogServerUdpPort, or 2.) etsysSyslogServerUdpPort is implemented read-only. If etsysSyslogServerUdpPort is implemented read-only, and this value is changed, it should affect the UDP port that is used to send syslog messages to all servers as soon as it is practical. This parameter value is maintained across system reboots.
Status: current Access: read-write
OBJECT-TYPE    
  SyslogUdpPort  

etsysSyslogServerDefaultFacility 1.3.6.1.4.1.5624.1.2.14.2.6
The default syslog facility (local0-local7) that will be encoded in syslog messages. This value will be used as the default value for etsysSyslogServerFacility when creating rows in the etsysSyslogServerTable and either: 1.) no value is specified for etsysSyslogServerFacility, or 2.) etsysSyslogServerFacility is implemented read-only. If etsysSyslogServerFacility is implemented read-only, and this value is changed, it should affect the syslog facility that is encoded in all syslog messages as soon as it is practical. This parameter value is maintained across system reboots.
Status: current Access: read-write
OBJECT-TYPE    
  SyslogFacility  

etsysSyslogServerDefaultSeverity 1.3.6.1.4.1.5624.1.2.14.2.7
The default syslog message severity level that will be used to filter all syslog messages. This value will be used as the default value for etsysSyslogServerSeverity when creating rows in the etsysSyslogServerTable and either: 1.) no value is specified for etsysSyslogServerSeverity, or 2.) etsysSyslogServerSeverity is implemented read-only. The higher the severity level, the less critical it is. If etsysSyslogServerSeverity is implemented read-only, and this value is changed, it should affect the syslog message severity level that will be used to filter all syslog messages as soon as it is practical. This parameter value is maintained across system reboots.
Status: current Access: read-write
OBJECT-TYPE    
  SyslogSeverity  

etsysSyslogApplicationTable 1.3.6.1.4.1.5624.1.2.14.3.1
This is a table of applications on the managed entity that provide individual control over the severity level of the messages that they will generate.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysSyslogApplicationEntry

etsysSyslogApplicationEntry 1.3.6.1.4.1.5624.1.2.14.3.1.1
An individual application that provides that ability to control the messages that it generates based on a severity level. MUST be considered non-volatile and MUST be maintained across entity resets.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysSyslogApplicationEntry  

etsysSyslogApplicationIndex 1.3.6.1.4.1.5624.1.2.14.3.1.1.1
A unique arbitrary identifier for this application.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

etsysSyslogApplicationDescription 1.3.6.1.4.1.5624.1.2.14.3.1.1.2
Textual description of this application, assigned by the managed entity.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..64)  

etsysSyslogApplicationMnemonic 1.3.6.1.4.1.5624.1.2.14.3.1.1.3
An abbreviation of the textual description for this application, assigned by the managed entity. i.e. 'STP' for 'Spanning Tree Protocol', etc. This provides a mapping between the textual descriptions and the mnemonics used in the syslog messages.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..8)  

etsysSyslogApplicationSeverity 1.3.6.1.4.1.5624.1.2.14.3.1.1.4
The maximum severity level of the messages from this application that should be forwarded to the syslog client software for processing. The higher the severity level, the more verbose the messages.
Status: current Access: read-write
OBJECT-TYPE    
  SyslogSeverity  

etsysSyslogApplicationAllowedServers 0.1.2.3.4.5.6.7.8.9.1.3.6.1.4.1.5624.1.2.14.3.1.1.5
A list of syslog servers that will be forwarded messages logged by this application. Bits in this list correspond to rows in the etsysSyslogServerTable. Bit positions that are set, but for which the corresponding etsysSyslogServerRowStatus object is not active, will be ignored.
Status: current Access: read-write
OBJECT-TYPE    
  BITS etsysSyslogServerIndex1(0), etsysSyslogServerIndex2(1), etsysSyslogServerIndex3(2), etsysSyslogServerIndex4(3), etsysSyslogServerIndex5(4), etsysSyslogServerIndex6(5), etsysSyslogServerIndex7(6), etsysSyslogServerIndex8(7), etsysSyslogServerConsole(8), etsysSyslogServerFile(9), etsysSyslogServerSecureFile(10)  

etsysSyslogSecureLogArchiveNotification 1.3.6.1.4.1.5624.1.2.14.5.1
Syslog security log archive notification. The device will send this notification when the secure syslog file should be archived offline.
Status: current Access: read-write
NOTIFICATION-TYPE    

etsysSyslogSecureLogDroppedMsgNotification 1.3.6.1.4.1.5624.1.2.14.5.2
Syslog secure messages dropped notification. The device will send this notification when messages that are required to be sent to the secure syslog file are dropped, failing to record those events.
Status: current Access: read-write
NOTIFICATION-TYPE    

etsysSyslogClientConformance 1.3.6.1.4.1.5624.1.2.14.4
OBJECT IDENTIFIER    

etsysSyslogClientGroups 1.3.6.1.4.1.5624.1.2.14.4.1
OBJECT IDENTIFIER    

etsysSyslogClientCompliances 1.3.6.1.4.1.5624.1.2.14.4.2
OBJECT IDENTIFIER    

etsysSyslogClientGroup 1.3.6.1.4.1.5624.1.2.14.4.1.1
A collection of objects providing syslog message statistics.
Status: current Access: read-write
OBJECT-GROUP    

etsysSyslogServerGroup 1.3.6.1.4.1.5624.1.2.14.4.1.2
A collection of objects providing descriptions of syslog servers for sending system messages to.
Status: current Access: read-write
OBJECT-GROUP    

etsysSyslogApplicationGroup 1.3.6.1.4.1.5624.1.2.14.4.1.3
A collection of objects providing a mechanism to control the severity level of the messages individual application may generate.
Status: current Access: read-write
OBJECT-GROUP    

etsysSyslogServerDefaultsGroup 1.3.6.1.4.1.5624.1.2.14.4.1.4
A collection of objects providing default values for the syslog servers that can optionally be overridden on a per server basis with etsysSyslogServerFacility, etsysSyslogServerSeverity, or etsysSyslogServerUdpPort.
Status: current Access: read-write
OBJECT-GROUP    

etsysSyslogNotificationGroup 1.3.6.1.4.1.5624.1.2.14.4.1.5
A collection of supported notifications regarding syslog events.
Status: current Access: read-write
NOTIFICATION-GROUP    

etsysSyslogSecureGroup 1.3.6.1.4.1.5624.1.2.14.4.1.6
A collection of objects providing statistics and information for syslog events that are associated with a secure file.
Status: current Access: read-write
OBJECT-GROUP    

etsysSyslogClientCompliance 1.3.6.1.4.1.5624.1.2.14.4.2.1
The compliance statement for devices that support sending system messages to a syslog server.
Status: current Access: read-only
MODULE-COMPLIANCE    

etsysSyslogNotificationCompliance 1.3.6.1.4.1.5624.1.2.14.4.2.2
The compliance statement for devices that support sending notifications upon specified syslog events.
Status: current Access: read-only
MODULE-COMPLIANCE    

etsysSyslogSecureCompliance 1.3.6.1.4.1.5624.1.2.14.4.2.3
The compliance statement for devices that support sending system messages to a secure syslog file.
Status: current Access: read-only
MODULE-COMPLIANCE