EQLMEMBER-MIB

File: EQLMEMBER-MIB.mib (143090 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC EQUALLOGIC-SMI
INET-ADDRESS-MIB EQLGROUP-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE IpAddress
Integer32 enterprises TimeTicks
Unsigned32 Counter32 Counter64
Gauge32 NOTIFICATION-TYPE DisplayString
RowStatus TruthValue equalLogic
InetAddressType InetAddress eqlGroupId
UTFString eqlStorageGroupAdminAccountIndex

Defined Types

EqlMemberSEDShareType  
A share of an SED encryption key.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..163)  

EqlMemberEntry  
SEQUENCE    
  eqlMemberIndex Unsigned32
  eqlMemberDateAndTime Counter32
  eqlMemberTimeZone INTEGER
  eqlMemberAdjustDaylightSavTime INTEGER
  eqlMemberDefaultRoute IpAddress
  eqlMemberUUID OCTET STRING
  eqlMemberName DisplayString
  eqlMemberSite DisplayString
  eqlMemberDescription UTFString
  eqlMemberRowStatus RowStatus
  eqlMemberState INTEGER
  eqlMemberPolicySingleControllerSafe INTEGER
  eqlMemberPolicyLowBatterySafe INTEGER
  eqlMemberVersion Unsigned32
  eqlMemberDelayDataMove INTEGER
  eqlMemberDefaultInetRouteType InetAddressType
  eqlMemberDefaultInetRoute InetAddress
  eqlMemberDriveMirroring INTEGER
  eqlMemberProfileIndex Unsigned32
  eqlMemberControllerType DisplayString
  eqlMemberControllerMajorVersion Unsigned32
  eqlMemberControllerMinorVersion Unsigned32
  eqlMemberControllerMaintenanceVersion Unsigned32
  eqlMemberCompressionCapable TruthValue

EqlMemberStatusEntry  
SEQUENCE    
  eqlMemberStatusTotalSpace Integer32
  eqlMemberStatusTotalSpaceUsed Integer32
  eqlMemberStatusModel DisplayString
  eqlMemberStatusSerialNumber DisplayString
  eqlMemberStatusNumberOfControllers INTEGER
  eqlMemberStatusNumberOfDisks Integer32
  eqlMemberStatusNumberOfSpares Integer32
  eqlMemberStatusCacheSize Integer32
  eqlMemberStatusCacheMode INTEGER
  eqlMemberStatusNumberOfConnections Integer32
  eqlMemberStatusAverageTemp Integer32
  eqlMemberStatusTempStatus INTEGER
  eqlMemberStatusBackplaneTempSensor1 Integer32
  eqlMemberStatusBackplaneTempSensor2 Integer32
  eqlMemberStatusPowerSupply1Status INTEGER
  eqlMemberStatusPowerSupply2Status INTEGER
  eqlMemberStatusTrayOneFanOneSpeed Integer32
  eqlMemberStatusTrayOneFanTwoSpeed Integer32
  eqlMemberStatusTrayTwoFanOneSpeed Integer32
  eqlMemberStatusTrayTwoFanTwoSpeed Integer32
  eqlMemberStatusPowerSupplyOneFanStatus INTEGER
  eqlMemberStatusPowerSupplyTwoFanStatus INTEGER
  eqlMemberStatusRaidStatus INTEGER
  eqlMemberStatusRaidPercentage Integer32
  eqlMemberStatusLostRaidBlocks INTEGER
  eqlMemberStatusHealth Integer32
  eqlMemberStatusShortId Integer32

EqlMemberInfoEntry  
SEQUENCE    
  eqlTargetMemberIndex Integer32
  eqlMemberInfoStatus INTEGER

EqlMemberHealthEntry  
SEQUENCE    
  eqlMemberHealthStatus INTEGER
  eqlMemberHealthWarningConditions BITS
  eqlMemberHealthCriticalConditions BITS

EqlMemberHealthDetailsTemperatureEntry  
SEQUENCE    
  eqlMemberHealthDetailsTempSensorIndex INTEGER
  eqlMemberHealthDetailsTemperatureName DisplayString
  eqlMemberHealthDetailsTemperatureValue Integer32
  eqlMemberHealthDetailsTemperatureCurrentState INTEGER
  eqlMemberHealthDetailsTemperatureHighCriticalThreshold Integer32
  eqlMemberHealthDetailsTemperatureHighWarningThreshold Integer32
  eqlMemberHealthDetailsTemperatureLowCriticalThreshold Integer32
  eqlMemberHealthDetailsTemperatureLowWarningThreshold Integer32
  eqlMemberHealthDetailsTemperatureNameID Unsigned32

EqlMemberHealthDetailsFanEntry  
SEQUENCE    
  eqlMemberHealthDetailsFanIndex INTEGER
  eqlMemberHealthDetailsFanName DisplayString
  eqlMemberHealthDetailsFanValue Unsigned32
  eqlMemberHealthDetailsFanCurrentState INTEGER
  eqlMemberHealthDetailsFanHighCriticalThreshold Unsigned32
  eqlMemberHealthDetailsFanHighWarningThreshold Unsigned32
  eqlMemberHealthDetailsFanLowCriticalThreshold Unsigned32
  eqlMemberHealthDetailsFanLowWarningThreshold Unsigned32
  eqlMemberHealthDetailsFanNameID Unsigned32

EqlMemberHealthDetailsPowerSupplyEntry  
SEQUENCE    
  eqlMemberHealthDetailsPowerSupplyIndex INTEGER
  eqlMemberHealthDetailsPowerSupplyName DisplayString
  eqlMemberHealthDetailsPowerSupplyCurrentState INTEGER
  eqlMemberHealthDetailsPowerSupplyFanStatus INTEGER
  eqlMemberHealthDetailsPowerSupplyFirmwareVersion DisplayString
  eqlMemberHealthDetailsPowerSupplyNameID Unsigned32

EqlMemberIdentificationEntry  
SEQUENCE    
  eqlMemberIdentificationLEDsBlinking TruthValue

EqlMemberStorageEntry  
SEQUENCE    
  eqlMemberTotalStorage Integer32
  eqlMemberUsedStorage Integer32
  eqlMemberSnapStorage Integer32
  eqlMemberReplStorage Integer32
  eqlMemberVirtualStorage Counter64
  eqlMemberCompressionStackStorage Counter64

EqlMemberChassisEntry  
SEQUENCE    
  eqlMemberModel DisplayString
  eqlMemberSerialNumber DisplayString
  eqlMemberNumberOfControllers INTEGER
  eqlMemberNumberOfDisks Integer32
  eqlMemberCacheSize Integer32
  eqlMemberCacheMode INTEGER
  eqlMemberChassisType INTEGER
  eqlMemberServiceTag DisplayString
  eqlMemberProductFamily DisplayString
  eqlMemberChassisFlags BITS
  eqlMemberChassisDiskSectorSize INTEGER

EqlMemberConnEntry  
SEQUENCE    
  eqlMemberNumberOfConnections Integer32
  eqlMemberReadLatency Counter64
  eqlMemberWriteLatency Counter64
  eqlMemberReadAvgLatency Gauge32
  eqlMemberWriteAvgLatency Gauge32
  eqlMemberReadOpCount Counter64
  eqlMemberWriteOpCount Counter64
  eqlMemberTxData Counter64
  eqlMemberRxData Counter64
  eqlMemberNumberOfExtConnections Integer32

EqlMemberRAIDEntry  
SEQUENCE    
  eqlMemberRaidStatus INTEGER
  eqlMemberRaidPercentage Integer32
  eqlMemberLostRaidBlocks INTEGER
  eqlMemberNumberOfSpares Integer32
  eqlMemberRaidProgress Unsigned32

EqlMemberPSGMapEntry  
SEQUENCE    
  eqlMemberShortId Integer32

EqlDriveGroupEntry  
SEQUENCE    
  eqlDriveGroupIndex Unsigned32
  eqlDriveGroupStoragePoolIndex Unsigned32
  eqlDriveGroupRAIDPolicy INTEGER

EqlDriveGroupOpsEntry  
SEQUENCE    
  eqlDriveGroupOpsIndex Unsigned32
  eqlDriveGroupOpsRowStatus RowStatus
  eqlDriveGroupOpsOperation INTEGER
  eqlDriveGroupOpsExec INTEGER
  eqlDriveGroupOpsStartTime Counter32
  eqlDriveGroupOpsStoragePoolSourceIndex Unsigned32
  eqlDriveGroupOpsStoragePoolDestinationIndex Unsigned32
  eqlDriveGroupOpsVolBalCommandIndex Unsigned32
  eqlDriveGroupOpsVolBalCommandiscsiLocalMemberId Unsigned32

EqlAdminAccountMemberEntry  
SEQUENCE    
  eqlAdminAccountMemberAccess INTEGER

EqlDriveGroupOpsStatusEntry  
SEQUENCE    
  eqlDriveGroupOpsStatusCompletePct Unsigned32

EqlMemberOpsEntry  
SEQUENCE    
  eqlMemberOpsIndex Unsigned32
  eqlMemberOpsRowStatus RowStatus
  eqlMemberOpsOperation INTEGER
  eqlMemberOpsExec INTEGER
  eqlMemberOpsCompletePct Integer32
  eqlMemberOpsOperationArg DisplayString
  eqlMemberOpsOperationStatus INTEGER
  eqlMemberOpsStartTime Unsigned32
  eqlMemberOpsOperationArg1 DisplayString

EqlMemberHWComponentEntry  
SEQUENCE    
  eqlMemberHWComponentIndex INTEGER
  eqlMemberHWComponentName DisplayString
  eqlMemberHWComponentSerialNumber DisplayString
  eqlMemberHWComponentFirmwareRev DisplayString
  eqlMemberHWComponentStatus INTEGER

EqlMemberDynamicInfoEntry  
SEQUENCE    
  eqlMemberDynamicInfoPendingUpdateVersion DisplayString
  eqlMemberDynamicInfoIsRestartRunning INTEGER
  eqlMemberDynamicInfoIsUpdateRunning INTEGER

EqlMemberCacheStatisticsEntry  
SEQUENCE    
  eqlMemberTotalPageCount Counter64
  eqlMemberHotPageCount Counter64
  eqlMemberWarmPageCount Counter64
  eqlMemberColdPageCount Counter64
  eqlMemberPageSize Unsigned32
  eqlMemberSSDAcceleratorSize Unsigned32
  eqlMemberSSDCacheSize Unsigned32
  eqlMemberSSDAcceleratorEntriesTotal Unsigned32
  eqlMemberSSDAcceleratorEntriesUsed Unsigned32

EqlMemberSEDEncryptionEntry  
SEQUENCE    
  eqlMemberSEDEncryptionRowStatus RowStatus
  eqlMemberSEDEncryptionShare1 EqlMemberSEDShareType
  eqlMemberSEDEncryptionShare2 EqlMemberSEDShareType
  eqlMemberSEDEncryptionShare3 EqlMemberSEDShareType

EqlMemberDynamicOpsEntry  
SEQUENCE    
  eqlMemberDynamicOpsOperation INTEGER
  eqlMemberDynamicOpsOperationArg OCTET STRING

EqlMemberGroupInfoAtMemberEntry  
SEQUENCE    
  eqlMemberGroupInfoAtMemberPasswd1 OCTET STRING
  eqlMemberGroupInfoAtMemberPasswd1Len Unsigned32

EqlDriveGroupStatisticsEntry  
SEQUENCE    
  eqlDriveGroupStatisticsIndex INTEGER
  eqlDriveGroupStatisticsHeadroom Unsigned32

EqlMemberFirmwareInfoEntry  
SEQUENCE    
  eqlMemberLanguageVersion DisplayString
  eqlMemberFirmwareInfoDataReduction INTEGER

EqlDriveGroupHeatProfileInfoEntry  
SEQUENCE    
  eqlDriveGroupHeatProfilePart Unsigned32
  eqlDriveGroupHeatProfileColdCount Counter64
  eqlDriveGroupHeatProfileMinMagnitude Integer32
  eqlDriveGroupHeatProfileMinMultiplier Unsigned32
  eqlDriveGroupHeatProfileMaxMagnitude Integer32
  eqlDriveGroupHeatProfileMaxMultiplier Unsigned32

EqlDriveGroupHeatProfileBinEntry  
SEQUENCE    
  eqlDriveGroupHeatProfileBinId Unsigned32
  eqlDriveGroupHeatProfileAccessRateMagnitude Integer32
  eqlDriveGroupHeatProfileAccessRateMultiplier Unsigned32
  eqlDriveGroupHeatProfileCount Counter64

EqlTaggedHeatProfileInfoEntry  
SEQUENCE    
  eqlTaggedHeatTag Unsigned32
  eqlTaggedHeatProfileColdCount Counter64
  eqlTaggedHeatProfileMinMagnitude Integer32
  eqlTaggedHeatProfileMinMultiplier Unsigned32
  eqlTaggedHeatProfileMaxMagnitude Integer32
  eqlTaggedHeatProfileMaxMultiplier Unsigned32

EqlTaggedHeatProfileBinEntry  
SEQUENCE    
  eqlTaggedHeatProfileBinId Unsigned32
  eqlTaggedHeatProfileAccessRateMagnitude Integer32
  eqlTaggedHeatProfileAccessRateMultiplier Unsigned32
  eqlTaggedHeatProfileCount Counter64

EqlMemberRaidPoliciesEntry  
SEQUENCE    
  eqlMemberRaidPoliciesBehavior INTEGER
  eqlMemberRaidPoliciesRAIDCapacity Counter64

EqlMemberPerTCPConnectionStatsEntry  
SEQUENCE    
  eqlMemberPerTCPConnectionStatsIndex Unsigned32
  eqlMemberPerTCPConnectionStatsLocalAddrType InetAddressType
  eqlMemberPerTCPConnectionStatsLocalAddr InetAddress
  eqlMemberPerTCPConnectionStatsLocalPort Unsigned32
  eqlMemberPerTCPConnectionStatsForeignAddrType InetAddressType
  eqlMemberPerTCPConnectionStatsForeignAddr InetAddress
  eqlMemberPerTCPConnectionStatsForeignPort Unsigned32
  eqlMemberPerTCPConnectionStatsMss Unsigned32
  eqlMemberPerTCPConnectionStatsState INTEGER
  eqlMemberPerTCPConnectionStatsSndpack Counter64
  eqlMemberPerTCPConnectionStatsSndbyte Counter64
  eqlMemberPerTCPConnectionStatsSndrexmitpack Counter64
  eqlMemberPerTCPConnectionStatsSndrexmitbyte Counter64
  eqlMemberPerTCPConnectionStatsRexmttimeout Counter64
  eqlMemberPerTCPConnectionStatsFastrexmt Counter64
  eqlMemberPerTCPConnectionStatsSndprobe Counter64
  eqlMemberPerTCPConnectionStatsRcvpack Counter64
  eqlMemberPerTCPConnectionStatsRcvbyte Counter64
  eqlMemberPerTCPConnectionStatsRcvwinprobe Counter64
  eqlMemberPerTCPConnectionStatsRcvbadsum Counter64

Defined Values

eqlmemberModule 1.3.6.1.4.1.12740.2
Dell Inc. Storage Array member information Copyright (c) 2002-2012 by Dell Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell Inc. This software embodies proprietary information and trade secrets of Dell Inc.
MODULE-IDENTITY    

eqlmemberObjects 1.3.6.1.4.1.12740.2.1
OBJECT IDENTIFIER    

eqlmemberNotifications 1.3.6.1.4.1.12740.2.2
OBJECT IDENTIFIER    

eqlmemberConformance 1.3.6.1.4.1.12740.2.3
OBJECT IDENTIFIER    

eqlMemberTable 1.3.6.1.4.1.12740.2.1.1
EqualLogic-Persistent Storage Group Member Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberEntry

eqlMemberEntry 1.3.6.1.4.1.12740.2.1.1.1
An entry (row) containing member info
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberEntry  

eqlMemberIndex 1.3.6.1.4.1.12740.2.1.1.1.1
This field unique identifies an array within a group.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlMemberDateAndTime 1.3.6.1.4.1.12740.2.1.1.1.2
This field is dynamic, it contains the date and time for the array. There is no default value.
Status: current Access: read-create
OBJECT-TYPE    
  Counter32  

eqlMemberTimeZone 1.3.6.1.4.1.12740.2.1.1.1.3
The field specifies the default timezone for the group. This can be overwritten on a per Array basis. The default is EST. We need to file in all the supported TZ. For now we punt and do GMT as the catch all.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER hst(1), ast(2), pst(3), pnt(4), mst(5), cst(6), est(7), iet(8), prt(9), gmt(10), ect(11), eet(12), eat(13), met(14), net(15), plt(16), ist(17), bst(18), vst(19), ctt(20), jst(21), act(22), aet(23), sst(24), nst(25), mit(26), cnt(27), agt(28), bet(29), cat(30)  

eqlMemberAdjustDaylightSavTime 1.3.6.1.4.1.12740.2.1.1.1.4
This field specifies whether or not dayLight savings time should be applied to the time. The default value is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

eqlMemberDefaultRoute 1.3.6.1.4.1.12740.2.1.1.1.5
This field is deprecated and will be unsupported in the next release.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

eqlMemberSite 1.3.6.1.4.1.12740.2.1.1.1.6
This field specifies the site where the volume res ides. Sites are defined on a per array basis. Sites are used to define where primary and secondary copies of volume mirror reside. The default is the default site.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

eqlMemberDescription 1.3.6.1.4.1.12740.2.1.1.1.7
This field contains a description of the array. For example the location of the array. There is no default.
Status: current Access: read-create
OBJECT-TYPE    
  UTFString Size(0..64)  

eqlMemberUUID 1.3.6.1.4.1.12740.2.1.1.1.8
EQL-SECONDARY-KEY This field is for internal use only.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(16)  

eqlMemberName 1.3.6.1.4.1.12740.2.1.1.1.9
This field specifies the name of the array. This name must be unique within the group. It can be a DNS name, though it is not required to be one. There is no default.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..64)  

eqlMemberRowStatus 1.3.6.1.4.1.12740.2.1.1.1.10
This RowStatus is used only to delete a member. The row in this table could be created only by the subsystem.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlMemberState 1.3.6.1.4.1.12740.2.1.1.1.11
The field specifies the desired state of the array. Currently setting this value to vacate is the only operation that is supported.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on-line(1), off-line(2), vacate(3), vacated(4)  

eqlMemberPolicySingleControllerSafe 1.3.6.1.4.1.12740.2.1.1.1.12
This field specifies the cache policy if we boot with only one CM.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER safe-enabled(1), safe-disabled(2)  

eqlMemberPolicyLowBatterySafe 1.3.6.1.4.1.12740.2.1.1.1.13
This field specifies the cache policy if the battery charge is below tolerance.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER safe-enabled(1), safe-disabled(2)  

eqlMemberVersion 1.3.6.1.4.1.12740.2.1.1.1.14
This field specifies the compatibility level of a member.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlMemberDelayDataMove 1.3.6.1.4.1.12740.2.1.1.1.15
When a new member is added to the group the value of this column will be zero(unconfigured). Before configuring raid-policy , this value must be set to wait(1) or use-member-space(2). The value can be changed from wait(1) to use-member-space(2) But once set to use-member-space, it cannot be changed back.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unconfigured(0), wait(1), use-member-space(2)  

eqlMemberDefaultInetRouteType 1.3.6.1.4.1.12740.2.1.1.1.16
This field is used to indicate the default gateway for the group. This value can be overriden on a per array basis. This field contains the address of the local router used to forward network traffic beyond the local subnet. Gateways are used to connect multiple subnets. There is no default value for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

eqlMemberDefaultInetRoute 1.3.6.1.4.1.12740.2.1.1.1.17
This field is used to indicate the default gateway for the group. This value can be overriden on a per array basis. This field contains the address of the local router used to forward network traffic beyond the local subnet. Gateways are used to connect multiple subnets. There is no default value for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

eqlMemberDriveMirroring 1.3.6.1.4.1.12740.2.1.1.1.18
On disk drive failures, this value is checked for mirroring the data onto the spare drive. The value can be changed from enabled(0) to disabled(1) and vice-versa
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

eqlMemberProfileIndex 1.3.6.1.4.1.12740.2.1.1.1.19
This field represents the profile identifier supported by this member.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

eqlMemberControllerType 1.3.6.1.4.1.12740.2.1.1.1.20
This variable specifies the type of the active controller module on this member. Ex: Type II
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

eqlMemberControllerMajorVersion 1.3.6.1.4.1.12740.2.1.1.1.21
This variable specifies the major version number of the software present on the active controller module.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberControllerMinorVersion 1.3.6.1.4.1.12740.2.1.1.1.22
This variable specifies the minor version number of the software present on the active controller module.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberControllerMaintenanceVersion 1.3.6.1.4.1.12740.2.1.1.1.23
This variable specifies the maintenance version number of the software present on the active controller module.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberCompressionCapable 1.3.6.1.4.1.12740.2.1.1.1.24
This variable specifies if the member is capable of supporting compression.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlMemberStatusTable 1.3.6.1.4.1.12740.2.1.3
EqualLogic-Dynamic Member Status Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberStatusEntry

eqlMemberStatusEntry 1.3.6.1.4.1.12740.2.1.3.1
An entry (row) containing member status info
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberStatusEntry  

eqlMemberStatusTotalSpace 1.3.6.1.4.1.12740.2.1.3.1.1
This field specifies the total disk space in MBs on the this array.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberStatusTotalSpaceUsed 1.3.6.1.4.1.12740.2.1.3.1.2
This field specifies the total disk space in MBs allocated to volume data for this array.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberStatusModel 1.3.6.1.4.1.12740.2.1.3.1.3
This field specifies the model number for the array.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

eqlMemberStatusSerialNumber 1.3.6.1.4.1.12740.2.1.3.1.4
This field specifies the serial number for the array.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

eqlMemberStatusNumberOfControllers 1.3.6.1.4.1.12740.2.1.3.1.5
This field specifies the number of Controller modules in the array.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER single(1), dual(2)  

eqlMemberStatusNumberOfDisks 1.3.6.1.4.1.12740.2.1.3.1.6
This field specifies the number of disks installed in the array.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberStatusNumberOfSpares 1.3.6.1.4.1.12740.2.1.3.1.7
This field specifies the number disks allocated as spares in an array.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberStatusCacheSize 1.3.6.1.4.1.12740.2.1.3.1.8
The field specifies the size in MB of the read/write cache within the array.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberStatusCacheMode 1.3.6.1.4.1.12740.2.1.3.1.9
This field specifies the mode the cache is in within the array. The default is write-back. The array will be set to write-thru on battery failure.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER write-thru(1), write-back(2)  

eqlMemberStatusNumberOfConnections 1.3.6.1.4.1.12740.2.1.3.1.11
This field specifies the number of iSCSI initiators which are connected to this array.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberStatusAverageTemp 1.3.6.1.4.1.12740.2.1.3.1.12
This field specifies the average tempature of the array in degrees C.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberStatusTempStatus 1.3.6.1.4.1.12740.2.1.3.1.13
This field specifies whether the tempatures for the array are within acceptable tolerances. ** What are acceptable tolerances?
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(1), bad(2)  

eqlMemberStatusBackplaneTempSensor1 1.3.6.1.4.1.12740.2.1.3.1.14
This field specifies the tempature of backplane sensor 1 in degrees C.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberStatusBackplaneTempSensor2 1.3.6.1.4.1.12740.2.1.3.1.15
This field specifies the tempature of backplane sensor 2 in degrees C.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberStatusPowerSupply1Status 1.3.6.1.4.1.12740.2.1.3.1.16
This field specifies the state of the first power supply.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), no-power(2), failed(3), fan-failed(4), not-present(5)  

eqlMemberStatusPowerSupply2Status 1.3.6.1.4.1.12740.2.1.3.1.17
This field specifies the state of the second power supply.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), no-power(2), failed(3), fan-failed(4), not-present(5)  

eqlMemberStatusTrayOneFanOneSpeed 1.3.6.1.4.1.12740.2.1.3.1.18
The field specifies the rpm fan speed for fan tray 1, fan 1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberStatusTrayOneFanTwoSpeed 1.3.6.1.4.1.12740.2.1.3.1.19
The field specifies the rpm fan speed for fan tray 1, fan 2.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberStatusTrayTwoFanOneSpeed 1.3.6.1.4.1.12740.2.1.3.1.20
The field specifies the rpm fan speed for fan tray 2, fan 1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberStatusTrayTwoFanTwoSpeed 1.3.6.1.4.1.12740.2.1.3.1.21
The field specifies the rpm fan speed for fan tray 2, fan 2.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberStatusPowerSupplyOneFanStatus 1.3.6.1.4.1.12740.2.1.3.1.22
This field specifies whether the fan in power supply one is on-line or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on-line(1), off-line(2)  

eqlMemberStatusPowerSupplyTwoFanStatus 1.3.6.1.4.1.12740.2.1.3.1.23
This field specifies whether the fan in power supply two is on-line or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on-line(1), off-line(2)  

eqlMemberStatusRaidStatus 1.3.6.1.4.1.12740.2.1.3.1.24
This field specifies the status of the raid subsystem. This is a composite of the view of the underlying subsystems. Status ok means things are ok. Status degraded means we are in a degraded state, possible because no spare is available. Status verifying means a verify pass is run, and a percent complete is available. Status reconstructing means we are reconstructing a drive and a percent complete is available. Status failed means we had a failure while we were up, possibly a drive failed and we have no spare. Status catastrophicLoss may not be visible to the user since the member may not be able to bootup. It means we need administrator intervention to correct the problem.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), degraded(2), verifying(3), reconstructing(4), failed(5), catastrophicLoss(6), expanding(7)  

eqlMemberStatusRaidPercentage 1.3.6.1.4.1.12740.2.1.3.1.25
This field specifies the percentage complete when the eqlMemberStatusRaidStatus is verifying or reconstructing.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

eqlMemberStatusLostRaidBlocks 1.3.6.1.4.1.12740.2.1.3.1.26
This field specifies whether we have lost blocks in the raid array which the user may want to clear.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

eqlMemberStatusHealth 1.3.6.1.4.1.12740.2.1.3.1.27
This field specifies what the overall health of the member is on a scale of 0(dead) to 100(healthy) -- deprecated by new health tables in v1.1
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

eqlMemberStatusShortId 1.3.6.1.4.1.12740.2.1.3.1.28
This field specifies short member address
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eqlMemberInfoTable 1.3.6.1.4.1.12740.2.1.4
EqualLogic-Dynamic Member Info Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberInfoEntry

eqlMemberInfoEntry 1.3.6.1.4.1.12740.2.1.4.1
An entry (row) containing member info
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberInfoEntry  

eqlTargetMemberIndex 1.3.6.1.4.1.12740.2.1.4.1.1
This is a duplication of eqlMemberIndex just to make our code generation happy.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eqlMemberInfoStatus 1.3.6.1.4.1.12740.2.1.4.1.2
The current state of the member.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on-line(1), off-line(2), vacating-in-progress(3), vacated(4)  

eqlMemberHealthTable 1.3.6.1.4.1.12740.2.1.5
EqualLogic-Dynamic Member Health Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberHealthEntry

eqlMemberHealthEntry 1.3.6.1.4.1.12740.2.1.5.1
An entry (row) containing overall member health info
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberHealthEntry  

eqlMemberHealthStatus 1.3.6.1.4.1.12740.2.1.5.1.1
The value of this object is determinted by the severity of the health condition state variables. The most severe state will be reflected.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(0), normal(1), warning(2), critical(3)  

eqlMemberHealthWarningConditions 1.3.6.1.4.1.12740.2.1.5.1.2
This field defines possible warning health conditions and which ones are present.
Status: current Access: read-only
OBJECT-TYPE    
  BITS hwComponentFailedWarn(0), powerSupplyRemoved(1), controlModuleRemoved(2), psfanOffline(3), fanSpeed(4), cacheSyncing(5), raidSetFaulted(6), highTemp(7), raidSetLostblkEntry(8), secondaryEjectSWOpen(9), b2bFailure(10), replicationNoProg(11), raidSpareTooSmall(12), lowTemp(13), powerSupplyFailed(14), timeOfDayClkBatteryLow(15), incorrectPhysRamSize(16), mixedMedia(17), sumoChannelCardMissing(18), sumoChannelCardFailed(19), batteryLessthan72hours(20), cpuFanNotSpinning(21), raidMoreSparesExpected(22), raidSpareWrongType(23), raidSsdRaidsetHasHdd(24), driveNotApproved(25), noEthernetFlowControl(26), fanRemovedCondition(27), smartBatteryLowCharge(28), nandHighBadBlockCount(29), networkStorm(30), batteryEndOfLifeWarning(31)  

eqlMemberHealthCriticalConditions 1.3.6.1.4.1.12740.2.1.5.1.3
This field defines possible critical health conditions and which ones are present.
Status: current Access: read-only
OBJECT-TYPE    
  BITS raidSetDoubleFaulted(0), bothFanTraysRemoved(1), highAmbientTemp(2), raidLostCache(3), moreThanOneFanSpeedCondition(4), fanTrayRemoved(5), raidSetLostblkTableFull(6), raidDeviceIncompatible(7), raidOrphanCache(8), raidMultipleRaidSets(9), nVRAMBatteryFailed(10), hwComponentFailedCrit(11), incompatControlModule(12), lowAmbientTemp(13), opsPanelFailure(14), emmLinkFailure(15), highBatteryTemperature(16), enclosureOpenPerm(17), sumoChannelBothMissing(18), sumoEIPFailureCOndition(19), sumoChannelBothFailed(20), staleMirrorDiskFailure(21), c2fPowerModuleFailureCondition(22), raidsedUnresolved(23), colossusDeniedFullPower(24), cemiUpdateInProgress(25), colossusCannotStart(26), multipleFansRemoved(27), smartBatteryFailure(28), critbit29(29), nandFailure(30), batteryEndOfLife(31)  

eqlMemberHealthDetailsTemperatureTable 1.3.6.1.4.1.12740.2.1.6
EqualLogic-Dynamic Member Health Details Temperature Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberHealthDetailsTemperatureEntry

eqlMemberHealthDetailsTemperatureEntry 1.3.6.1.4.1.12740.2.1.6.1
An entry (row) containing member health detailed temperature info
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberHealthDetailsTemperatureEntry  

eqlMemberHealthDetailsTempSensorIndex 1.3.6.1.4.1.12740.2.1.6.1.1
A unique integer that denotes which temperature sensor this entry refers to
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER integratedSystemTemperature(1), backplaneSensor0(2), backplaneSensor1(3), controlModule0processor(4), controlModule0chipset(5), controlModule1processor(6), controlModule1chipset(7), controlModule0sasController(8), controlModule0sasExpander(9), controlModule0sesEnclosure(10), controlModule1sasController(11), controlModule1sasExpander(12), controlModule1sesEnclosure(13), sesOpsPanel(14), cemi0(15), cemi1(16), controlModule0batteryThermistor(17), controlModule1batteryThermistor(18), subExpanderModule0(19), subExpanderModule1(20), subExpanderModule2(21), subExpanderModule3(22), bottomplane0d0(23), bottomplane0d1(24), bottomplane0d2(25), bottomplane0d3(26), bottomplane0d4(27), bottomplane1d0(28), bottomplane1d1(29), bottomplane1d2(30), bottomplane1d3(31), bottomplane1d4(32), subExpanderModule0expander0(33), subExpanderModule0expander1(34), subExpanderModule1expander0(35), subExpanderModule1expander1(36), subExpanderModule2expander0(37), subExpanderModule2expander1(38), subExpanderModule3expander0(39), subExpanderModule3expander1(40)  

eqlMemberHealthDetailsTemperatureName 1.3.6.1.4.1.12740.2.1.6.1.2
This field specifies the name of the sensor that we display to the user.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

eqlMemberHealthDetailsTemperatureValue 1.3.6.1.4.1.12740.2.1.6.1.3
The value of this object is temperature in degrees C
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberHealthDetailsTemperatureCurrentState 1.3.6.1.4.1.12740.2.1.6.1.4
This field tells us the state of the temperature sensor. Either normal, warning or critical.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), normal(1), warning(2), critical(3)  

eqlMemberHealthDetailsTemperatureHighCriticalThreshold 1.3.6.1.4.1.12740.2.1.6.1.5
when the TemperatureValue is greater than or equal to this variable's value the current state is set to critical.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberHealthDetailsTemperatureHighWarningThreshold 1.3.6.1.4.1.12740.2.1.6.1.6
when the TemperatureValue is greater than or equal to this variable's value and not greater than or equal to the HighCriticalThreshold, the current state is set to warning.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberHealthDetailsTemperatureLowCriticalThreshold 1.3.6.1.4.1.12740.2.1.6.1.7
when the TemperatureValue is less than or equal to this variable's value the current state is set to critical.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberHealthDetailsTemperatureLowWarningThreshold 1.3.6.1.4.1.12740.2.1.6.1.8
when the TemperatureValue is less than or equal to this variable's value and not less than or equal to the LowCriticalThreshold, the current state is set to warning.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberHealthDetailsTemperatureNameID 1.3.6.1.4.1.12740.2.1.6.1.9
This field specifies the XML based name ID of the sensor that we display to the user.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberHealthDetailsFanTable 1.3.6.1.4.1.12740.2.1.7
EqualLogic-Dynamic Member Health Details Fan Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberHealthDetailsFanEntry

eqlMemberHealthDetailsFanEntry 1.3.6.1.4.1.12740.2.1.7.1
An entry (row) containing member health detailed fan info
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberHealthDetailsFanEntry  

eqlMemberHealthDetailsFanIndex 1.3.6.1.4.1.12740.2.1.7.1.1
A unique integer that identifies the fan that the corresponding entry refers to
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER emm0fan0(1), emm0fan1(2), emm1fan0(3), emm1fan1(4), emm2fan0(5), emm2fan1(6), emm3fan0(7), emm3fan1(8)  

eqlMemberHealthDetailsFanName 1.3.6.1.4.1.12740.2.1.7.1.2
This field specifies the name of the fan that we display to the user.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

eqlMemberHealthDetailsFanValue 1.3.6.1.4.1.12740.2.1.7.1.3
The value of this object is fan speed in rpm.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberHealthDetailsFanCurrentState 1.3.6.1.4.1.12740.2.1.7.1.4
This field tells us the state of the fan. Either normal, warning or critical.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), normal(1), warning(2), critical(3)  

eqlMemberHealthDetailsFanHighCriticalThreshold 1.3.6.1.4.1.12740.2.1.7.1.5
when the FanValue is greater than or equal to this variable's value the current state is set to critical.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberHealthDetailsFanHighWarningThreshold 1.3.6.1.4.1.12740.2.1.7.1.6
when the FanValue is greater than or equal to this variable's value and not greater than or equal to the HighCriticalThreshold, the current state is set to warning.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberHealthDetailsFanLowCriticalThreshold 1.3.6.1.4.1.12740.2.1.7.1.7
when the FanValue is less than or equal to this variable's value the current state is set to critical.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberHealthDetailsFanLowWarningThreshold 1.3.6.1.4.1.12740.2.1.7.1.8
when the FanValue is less than or equal to this variable's value and not less than or equal to the LowCriticalThreshold, the current state is set to warning.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberHealthDetailsFanNameID 1.3.6.1.4.1.12740.2.1.7.1.9
This field specifies the XML based name ID of the fan that we display to the user.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberHealthDetailsPowerSupplyTable 1.3.6.1.4.1.12740.2.1.8
EqualLogic-Dynamic Member Health Details Power Supply Table. The mappng of index to power supply: .1 = power supply 0 .2 = power supply 1 .3 = power supply 2
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberHealthDetailsPowerSupplyEntry

eqlMemberHealthDetailsPowerSupplyEntry 1.3.6.1.4.1.12740.2.1.8.1
An entry (row) containing power supply status information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberHealthDetailsPowerSupplyEntry  

eqlMemberHealthDetailsPowerSupplyIndex 1.3.6.1.4.1.12740.2.1.8.1.1
Iff the power supply current state is on-and-operating, then this field tells if the fan is operational.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER powerSupply0(1), powerSupply1(2), powerSupply2(3)  

eqlMemberHealthDetailsPowerSupplyName 1.3.6.1.4.1.12740.2.1.8.1.2
This field specifies the name of the power supply that we display to the user.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

eqlMemberHealthDetailsPowerSupplyCurrentState 1.3.6.1.4.1.12740.2.1.8.1.3
This field tells us the state of the power supply.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on-and-operating(1), no-ac-power(2), failed-or-no-data(3)  

eqlMemberHealthDetailsPowerSupplyFanStatus 1.3.6.1.4.1.12740.2.1.8.1.4
Iff the power supply current state is on-and-operating, then this field tells if the fan is operational.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER not-applicable(0), fan-is-operational(1), fan-not-operational(2)  

eqlMemberHealthDetailsPowerSupplyFirmwareVersion 1.3.6.1.4.1.12740.2.1.8.1.5
This field specifies power supply firmware version. Only available starting from Porfidio Platforms.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

eqlMemberHealthDetailsPowerSupplyNameID 1.3.6.1.4.1.12740.2.1.8.1.6
This field specifies the XML based nameID of the power supply that we display to the user.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberIdentificationTable 1.3.6.1.4.1.12740.2.1.9
EqualLogic-Dynamic Member Identification Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberIdentificationEntry

eqlMemberIdentificationEntry 1.3.6.1.4.1.12740.2.1.9.1
List of attributes of the array used to identity the location of that array.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberIdentificationEntry  

eqlMemberIdentificationLEDsBlinking 1.3.6.1.4.1.12740.2.1.9.1.1
Setting this variable to true enables blinking of the ALRM and WARN LEDs on the front panel and the ERR LED on the CM, as seen from the back. The blinking stops after 2 hours or when the variable is set to false.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlMemberStorageTable 1.3.6.1.4.1.12740.2.1.10
EqualLogic-Dynamic Member Storage Information Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberStorageEntry

eqlMemberStorageEntry 1.3.6.1.4.1.12740.2.1.10.1
List of attributes used to convey the details of storage space utilization on the array.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberStorageEntry  

eqlMemberTotalStorage 1.3.6.1.4.1.12740.2.1.10.1.1
This field specifies the total disk storage in MBs on the array.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberUsedStorage 1.3.6.1.4.1.12740.2.1.10.1.2
This field specifies sum of reserved delegated space, reserved volume space, used snapshot space, used replication space.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberSnapStorage 1.3.6.1.4.1.12740.2.1.10.1.3
This field specifies used snapshot space. Space on this array used by snapshots. Note that this value is not the same as space reserved for snapshots.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberReplStorage 1.3.6.1.4.1.12740.2.1.10.1.4
This field specifies used replication space. Space on this array used by in progress replicas or failback replicas. Note that this value is not the same as space reserved for replication.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberVirtualStorage 1.3.6.1.4.1.12740.2.1.10.1.5
This field specifies the amount of space (MB) used by compressed pages if all pages were not compressed on the member.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberCompressionStackStorage 1.3.6.1.4.1.12740.2.1.10.1.6
The amount of space (MB) used to store compressed data on this member.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberChassisTable 1.3.6.1.4.1.12740.2.1.11
EqualLogic-Dynamic Member Chassis Information Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberChassisEntry

eqlMemberChassisEntry 1.3.6.1.4.1.12740.2.1.11.1
List of attributes used to convey the details and type of Chassis present on the array.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberChassisEntry  

eqlMemberModel 1.3.6.1.4.1.12740.2.1.11.1.1
This field specifies the model number for the array.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

eqlMemberSerialNumber 1.3.6.1.4.1.12740.2.1.11.1.2
This field specifies the serial number for the array.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

eqlMemberNumberOfControllers 1.3.6.1.4.1.12740.2.1.11.1.3
This field specifies the number of Controller modules in the array.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER single(1), dual(2)  

eqlMemberNumberOfDisks 1.3.6.1.4.1.12740.2.1.11.1.4
This field specifies the number of disk installed in the array.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberCacheSize 1.3.6.1.4.1.12740.2.1.11.1.5
The field specifies the size in MB of the read/write cache within the array.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberCacheMode 1.3.6.1.4.1.12740.2.1.11.1.6
This field specifies the mode the cache is in within the array. The default is write-back. The array will be set to write-thru on battery failure.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), write-thru(1), write-back(2)  

eqlMemberChassisType 1.3.6.1.4.1.12740.2.1.11.1.7
This field specifies the chassis type of the array. The default is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), t1403(1), t1603(2), t4835(3), tDELLSBB2u1235(4), tDELLSBB2u2425(5), tDELLSBB4u2435(6), tDELL2WB1425V1(7), tDELLSBB5u6035(8)  

eqlMemberServiceTag 1.3.6.1.4.1.12740.2.1.11.1.8
This field specifies the service tag number for the array.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

eqlMemberProductFamily 1.3.6.1.4.1.12740.2.1.11.1.9
This field specifies the product family of the peer storage array. Ex: PS5000 E Series.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

eqlMemberChassisFlags 1.3.6.1.4.1.12740.2.1.11.1.10
This field defines the common place holder for Chassis operational flags. The flags must be of type enable(1) or disable(0), and the default will always be disable(0).
Status: current Access: read-only
OBJECT-TYPE    
  BITS isAccelerated(0), isAllSedDisks(1), flag2(2), flag3(3), flag4(4), flag5(5), flag6(6), flag7(7), flag8(8), flag9(9), flag10(10), flag11(11), flag12(12), flag13(13), flag14(14), flag15(15), flag16(16), flag17(17), flag18(18), flag19(19), flag20(20), flag21(21), flag22(22), flag23(23), flag24(24), flag25(25), flag26(26), flag27(27), flag28(28), flag29(29), flag30(30), flag31(31)  

eqlMemberChassisDiskSectorSize 1.3.6.1.4.1.12740.2.1.11.1.11
This field specifies the disk sector size of disks in this array.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER sector-size-512-bytes(0), sector-size-4096-bytes(1), sector-size-unknown(2), sector-size-mixed(3)  

eqlMemberConnTable 1.3.6.1.4.1.12740.2.1.12
EqualLogic-Dynamic Member Conn Information Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberConnEntry

eqlMemberConnEntry 1.3.6.1.4.1.12740.2.1.12.1
List of attributes used to convey the connections information on the array.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberConnEntry  

eqlMemberNumberOfConnections 1.3.6.1.4.1.12740.2.1.12.1.1
This field specifies the number of iSCSI connections made from initiators to this array.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberReadLatency 1.3.6.1.4.1.12740.2.1.12.1.2
The accumulative latency in milli seconds for read operations on this member. The value will be zero until all members are atleast 3.0. The value is reset to zero upon reboot.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberWriteLatency 1.3.6.1.4.1.12740.2.1.12.1.3
The accumulative latency in milli seconds for write operations on this member. The value will be zero until all members are atleast 3.0. The value is reset to zero upon reboot.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberReadAvgLatency 1.3.6.1.4.1.12740.2.1.12.1.4
The average latency for read operations on this member in milli seconds. The value is reset to zero upon reboot.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

eqlMemberWriteAvgLatency 1.3.6.1.4.1.12740.2.1.12.1.5
The average latency for write operations on this member in milli seconds. The value is reset to zero upon reboot.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

eqlMemberReadOpCount 1.3.6.1.4.1.12740.2.1.12.1.6
The number of read operations on this member. The value is reset to zero upon reboot.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberWriteOpCount 1.3.6.1.4.1.12740.2.1.12.1.7
The number of write operations on this member. The value is reset to zero upon reboot.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberTxData 1.3.6.1.4.1.12740.2.1.12.1.8
The count of data octets trasmitted by this member.The value is reset to zero upon reboot.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberRxData 1.3.6.1.4.1.12740.2.1.12.1.9
The count of data octets received by this member.The value is reset to zero upon reboot.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberNumberOfExtConnections 1.3.6.1.4.1.12740.2.1.12.1.10
This field specifies the number of iSCSI connections made from external initiators to this array.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberRAIDTable 1.3.6.1.4.1.12740.2.1.13
EqualLogic-Dynamic Member RAID Information Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberRAIDEntry

eqlMemberRAIDEntry 1.3.6.1.4.1.12740.2.1.13.1
List of attributes used to convey the RAID status information on the array.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberRAIDEntry  

eqlMemberRaidStatus 1.3.6.1.4.1.12740.2.1.13.1.1
This field specifies the status of the raid subsystem. This is a composite of the view of the underlying subsystems. Status ok means things are ok. Status degraded means we are in a degraded state, possible because no spare is available. Status verifying means a verify pass is run, and a percent complete is available. Status reconstructing means we are reconstructing a drive and a percent complete is available. Status failed means we had a failure while we were up, possibly a drive failed and we have no spare. Status catastrophicLoss may not be visible to the user since the member may not be able to bootup. It means we need administrator intervention to correct the problem. Status mirroring means we are mirroring a bad drive onto a spare drive.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), degraded(2), verifying(3), reconstructing(4), failed(5), catastrophicLoss(6), expanding(7), mirroring(8)  

eqlMemberRaidPercentage 1.3.6.1.4.1.12740.2.1.13.1.2
This field specifies the percentage complete when the eqlMemberStatusRaidStatus is verifying or reconstructing.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

eqlMemberLostRaidBlocks 1.3.6.1.4.1.12740.2.1.13.1.3
This field specifies whether we have lost blocks in the raid array which the user may want to clear.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

eqlMemberNumberOfSpares 1.3.6.1.4.1.12740.2.1.13.1.4
This field specifies the number disks allocated as spares in an array.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlMemberRaidProgress 1.3.6.1.4.1.12740.2.1.13.1.5
This field specifies 1000 times the percentage complete when the eqlMemberStatusRaidStatus is verifying or reconstructing.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000  

eqlMemberPSGMapTable 1.3.6.1.4.1.12740.2.1.14
EqualLogic-Dynamic Member PSG Map Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberPSGMapEntry

eqlMemberPSGMapEntry 1.3.6.1.4.1.12740.2.1.14.1
List of attributes used to convey the PSS ID information of this array in the group map.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberPSGMapEntry  

eqlMemberShortId 1.3.6.1.4.1.12740.2.1.14.1.1
This field specifies PSS ID of the member in the context of the leader of the PSG.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eqlMemberEnclosureMgmtNotifications 1.3.6.1.4.1.12740.2.2.1
OBJECT IDENTIFIER    

eqlMemberHealthTempSensorHighThreshold 1.3.6.1.4.1.12740.2.2.1.1
Sent when a high threshold has been exceeded for any of the enclosure temp sensors. The implementation of this trap should not send more than one notification of this type for a sensor in any 10 minute time span
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthTempSensorLowThreshold 1.3.6.1.4.1.12740.2.2.1.2
Sent when a low threshold has been exceeded for any of the enclosure temp sensors. The implementation of this trap should not send more than one notification of this type for a sensor in any 10 minute time span
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthFanSpeedHighThreshold 1.3.6.1.4.1.12740.2.2.1.3
Sent when a high threshold has been exceeded for any of the enclosure fan speed sensors. The implementation of this trap should not send more than one notification of this type for a sensor in any 10 minute time span
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthFanSpeedLowThreshold 1.3.6.1.4.1.12740.2.2.1.4
Sent when a low threshold has been exceeded for any of the enclosure fan speed sensors. The implementation of this trap should not send more than one notification of this type for a sensor in any 10 minute time span
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthPowerSupplyFanFailure 1.3.6.1.4.1.12740.2.2.1.5
Sent when a failure has been detected on any of the power supply fan speed sensors. The implementation of this trap should not send more than one notification of this type for a sensor in any 10 minute time span
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthPowerSupplyFailure 1.3.6.1.4.1.12740.2.2.1.6
Sent when a failure has been detected on any of the power supplys in the PSA. The implementation of this trap should not send more than one notification of this type for a sensor in any 10 minute time span
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthRAIDSetDoubleFaulted 1.3.6.1.4.1.12740.2.2.1.7
Sent when the raid set has been detected to have double faulted. When this occurs, the array will not come up. User intervention is required to correct the issue
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthBothFanTraysRemoved 1.3.6.1.4.1.12740.2.2.1.8
Sent when both of the fan trays have been removed from the chassis. This results in overheating
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthRAIDlostCache 1.3.6.1.4.1.12740.2.2.1.9
Sent because the RAID driver is unable to recover the battery-backed cache. The disk array will not initialize without user intervention. See the Handling Lost Data section in the Group Administration manual for more information.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthFanTrayRemoved 1.3.6.1.4.1.12740.2.2.1.10
Sent when one of the fan trays have been removed from the chassis. This results in overheating
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthRAIDSetLostBlkTableFull 1.3.6.1.4.1.12740.2.2.1.11
Sent when the RAID lost block table is full. This usually is an indication of lost data.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthBatteryLessThan72Hours 1.3.6.1.4.1.12740.2.2.1.12
Sent when the battery has insufficient charge to survive a 72 hour power outage.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthRaidOrphanCache 1.3.6.1.4.1.12740.2.2.1.13
Sent when the RAID driver finds data in the battery-backed cache with no matching disk array. Initialization will not proceed without user intervention. Call EqualLogic Support for assistance.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthRaidMultipleRaidSets 1.3.6.1.4.1.12740.2.2.1.14
Sent when multiple valid RAIDsets were found. The array cannot choose which one to initialize. Remove all but one valid RAIDset and power-cycle the array.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthNVRAMBatteryFailed 1.3.6.1.4.1.12740.2.2.1.15
Sent when the NVRAM battery fails . The NVRAM can no longer be used.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthhwComponentFailedCrit 1.3.6.1.4.1.12740.2.2.1.16
Sent when a critical hardware component has failed.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthincompatControlModule 1.3.6.1.4.1.12740.2.2.1.17
Sent when An incorrect control module has been inserted into the chassis.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthlowAmbientTemp 1.3.6.1.4.1.12740.2.2.1.18
Sent when one or more sensors is below its critical temperature range.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthopsPanelFailure 1.3.6.1.4.1.12740.2.2.1.19
Sent when Ops Panel is missing or broken.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthemmLinkFailure 1.3.6.1.4.1.12740.2.2.1.20
Sent when enclosure management services are unavailable.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthhighBatteryTemperature 1.3.6.1.4.1.12740.2.2.1.21
Sent when the cache battery temperature exceeds upper limit; battery charger is disabled.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthenclosureOpenPerm 1.3.6.1.4.1.12740.2.2.1.22
Sent when the enclosure is open for a long time.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthsumoChannelBothMissing 1.3.6.1.4.1.12740.2.2.1.23
Sent when both the Sumo Channel cards go missing.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthsumoEIPFailureCOndition 1.3.6.1.4.1.12740.2.2.1.24
Sent when EIP failed in Sumo.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlMemberHealthsumoChannelBothFailed 1.3.6.1.4.1.12740.2.2.1.25
Sent when both the Sumo Channel cards go into failed state.
Status: current Access: read-write
NOTIFICATION-TYPE    

eqlDriveGroupTable 1.3.6.1.4.1.12740.2.1.15
EqualLogic-Persistent Storage Drive Group Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlDriveGroupEntry

eqlDriveGroupEntry 1.3.6.1.4.1.12740.2.1.15.1
An entry (row) containing drive group configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlDriveGroupEntry  

eqlDriveGroupIndex 1.3.6.1.4.1.12740.2.1.15.1.1
This field uniquely identifies a RAID Group within a member.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlDriveGroupStoragePoolIndex 1.3.6.1.4.1.12740.2.1.15.1.2
This field uniquely identifies a Storage Pool.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlDriveGroupRAIDPolicy 1.3.6.1.4.1.12740.2.1.15.1.3
The RAID policy of this drive group: 0 - unconfigured 1 - raid50 2 - raid10 3 - raid5 4 - raid50 with minimal spares 5 - raid10 with minimal spares 6 - raid5 with minimal spares 7 - raid6 8 - raid6 with minimal spares 9 - raid6 with ssd acceleration 10 - hvs storage
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unconfigured(0), raid50(1), raid10(2), raid5(3), raid50-nospares(4), raid10-nospares(5), raid5-nospares(6), raid6(7), raid6-nospares(8), raid6-accelerated(9), hvs-storage(10)  

eqlDriveGroupOpsTable 1.3.6.1.4.1.12740.2.1.16
EqualLogic-Persistent Storage Drive Group Operations Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlDriveGroupOpsEntry

eqlDriveGroupOpsEntry 1.3.6.1.4.1.12740.2.1.16.1
An entry (row) containing drive group configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlDriveGroupOpsEntry  

eqlDriveGroupOpsIndex 1.3.6.1.4.1.12740.2.1.16.1.1
This field unique identifies an operation withing a Drive Group.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlDriveGroupOpsRowStatus 1.3.6.1.4.1.12740.2.1.16.1.2
This field is used indicate the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlDriveGroupOpsOperation 1.3.6.1.4.1.12740.2.1.16.1.3
The current operation for this drive group 0 - no operation 1 - move Pool 2 - vacate
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), movePool(1), vacate(2)  

eqlDriveGroupOpsExec 1.3.6.1.4.1.12740.2.1.16.1.4
The action to perform on this operation 0 - no operation 1 - cancel 2 - the operation failed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), cancel(1), failed(2)  

eqlDriveGroupOpsStartTime 1.3.6.1.4.1.12740.2.1.16.1.5
This field contains the time of the start of the operation.
Status: current Access: read-write
OBJECT-TYPE    
  Counter32  

eqlDriveGroupOpsStoragePoolSourceIndex 1.3.6.1.4.1.12740.2.1.16.1.6
This field unique identifies the source Storage Pool.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlDriveGroupOpsStoragePoolDestinationIndex 1.3.6.1.4.1.12740.2.1.16.1.7
This field unique identifies the destination Storage Pool.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlDriveGroupOpsVolBalCommandIndex 1.3.6.1.4.1.12740.2.1.16.1.8
2nd Part of Index for row in eqliscsiVolBalCommandTable
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlDriveGroupOpsVolBalCommandiscsiLocalMemberId 1.3.6.1.4.1.12740.2.1.16.1.9
3rd Part of Index for row in eqliscsiVolBalCommandTable
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlAdminAccountMemberTable 1.3.6.1.4.1.12740.2.1.17
EqualLogic-Dynamic table indicating the access an administrator has to a member.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlAdminAccountMemberEntry

eqlAdminAccountMemberEntry 1.3.6.1.4.1.12740.2.1.17.1
An entry (row) containing the access privilege.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlAdminAccountMemberEntry  

eqlAdminAccountMemberAccess 1.3.6.1.4.1.12740.2.1.17.1.1
The administrative permission to a member.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER read-only(1), read-write(2)  

eqlDriveGroupOpsStatusTable 1.3.6.1.4.1.12740.2.1.18
EqualLogic-Dynamic Storage Volume Operations Status Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlDriveGroupOpsStatusEntry

eqlDriveGroupOpsStatusEntry 1.3.6.1.4.1.12740.2.1.18.1
An entry (row) containing status for volume operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlDriveGroupOpsStatusEntry  

eqlDriveGroupOpsStatusCompletePct 1.3.6.1.4.1.12740.2.1.18.1.1
The percentage complete an ongoing move or bind operation is
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberOpsTable 1.3.6.1.4.1.12740.2.1.19
EqualLogic-Persistent Member Operations Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberOpsEntry

eqlMemberOpsEntry 1.3.6.1.4.1.12740.2.1.19.1
An entry (row) containing Member operations configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberOpsEntry  

eqlMemberOpsIndex 1.3.6.1.4.1.12740.2.1.19.1.1
The field uniquely identifies an operation within a Member.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlMemberOpsRowStatus 1.3.6.1.4.1.12740.2.1.19.1.2
This field is used indicate the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlMemberOpsOperation 1.3.6.1.4.1.12740.2.1.19.1.3
The current operation for this Member 0 - no operation 3 - get diagnostics 4 - firmware update 5 - restart array 6 - shutdown array 7 - delete old update kit (deprecated, use eqlMemberDynamicOps instead) 8 - install software component 9 - update from the cli
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), diagnose(3), update(4), restart(5), shutdown(6), delete-pending(7), install-software-component(8), cli-update(9)  

eqlMemberOpsExec 1.3.6.1.4.1.12740.2.1.19.1.4
The action to perform on this operation 0 - no operation 1 - cancel
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), cancel(1), failed(2)  

eqlMemberOpsCompletePct 1.3.6.1.4.1.12740.2.1.19.1.5
The percentage complete an ongoing diag operation is
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..100  

eqlMemberOpsOperationArg 1.3.6.1.4.1.12740.2.1.19.1.6
This field specifies the argument for the operation. There is no default.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

eqlMemberOpsOperationStatus 1.3.6.1.4.1.12740.2.1.19.1.7
The status of the operation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER success(0), failure(1)  

eqlMemberOpsStartTime 1.3.6.1.4.1.12740.2.1.19.1.8
This field contains the time of the start of the operation.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlMemberOpsOperationArg1 1.3.6.1.4.1.12740.2.1.19.1.9
This field specifies the additional argument(s) for the operation. There is no default.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

eqlMemberHWComponentTable 1.3.6.1.4.1.12740.2.1.20
EqualLogic-Dynamic Member Hardware component table. This is the general place holder for all single hardware components on the member. If there is more than one such hardware component(controllers, channel cards), they go into their own table. Otherwise they end up in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberHWComponentEntry

eqlMemberHWComponentEntry 1.3.6.1.4.1.12740.2.1.20.1
An entry (row) containing member health detailed fan info
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberHWComponentEntry  

eqlMemberHWComponentIndex 1.3.6.1.4.1.12740.2.1.20.1.1
A unique integer that identifies the fan that the corresponding entry refers to
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER eip(1)  

eqlMemberHWComponentName 1.3.6.1.4.1.12740.2.1.20.1.2
This field specifies the name of the component.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

eqlMemberHWComponentSerialNumber 1.3.6.1.4.1.12740.2.1.20.1.3
This field specifies the serial number of the component.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

eqlMemberHWComponentFirmwareRev 1.3.6.1.4.1.12740.2.1.20.1.4
This field specifies the firmware revision of the component.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

eqlMemberHWComponentStatus 1.3.6.1.4.1.12740.2.1.20.1.5
This field specifies the status of the component.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), not-present(1), failed(2), good(3)  

eqlMemberDynamicInfoTable 1.3.6.1.4.1.12740.2.1.21
EqualLogic-Dynamic Member Info Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberDynamicInfoEntry

eqlMemberDynamicInfoEntry 1.3.6.1.4.1.12740.2.1.21.1
An entry (row) containing dynamic member info
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberDynamicInfoEntry  

eqlMemberDynamicInfoPendingUpdateVersion 1.3.6.1.4.1.12740.2.1.21.1.1
This field specifies the string to be read. To be used to send the member's pending update version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

eqlMemberDynamicInfoIsRestartRunning 1.3.6.1.4.1.12740.2.1.21.1.2
This field specifies the status of the reboot shell script.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER not-running(0), running(1)  

eqlMemberDynamicInfoIsUpdateRunning 1.3.6.1.4.1.12740.2.1.21.1.3
This field specifies the status of the update shell script.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER not-running(0), running(1)  

eqlMemberCacheStatisticsTable 1.3.6.1.4.1.12740.2.1.22
EqualLogic-Dynamic member cache statistics table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberCacheStatisticsEntry

eqlMemberCacheStatisticsEntry 1.3.6.1.4.1.12740.2.1.22.1
An entry (row) containing member cache statistics info
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberCacheStatisticsEntry  

eqlMemberTotalPageCount 1.3.6.1.4.1.12740.2.1.22.1.1
This field specifies the total count of pages on the storage array
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberHotPageCount 1.3.6.1.4.1.12740.2.1.22.1.2
This field specifies count of most frequently accessed pages on the storage array
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberWarmPageCount 1.3.6.1.4.1.12740.2.1.22.1.3
This field specifies count of moderately accessed pages on the storage array
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberColdPageCount 1.3.6.1.4.1.12740.2.1.22.1.4
This field specifies count of pages not currently being accessed on the storage array
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberPageSize 1.3.6.1.4.1.12740.2.1.22.1.5
This field specifies size of an IOM page
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberSSDAcceleratorSize 1.3.6.1.4.1.12740.2.1.22.1.6
This field specifies amount of space reserved for mapping writes to SSD
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberSSDCacheSize 1.3.6.1.4.1.12740.2.1.22.1.7
This field specifies SSD RAID LUN
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberSSDAcceleratorEntriesTotal 1.3.6.1.4.1.12740.2.1.22.1.8
This field specifies the total number of i/o's that can be mapped to SSD space
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberSSDAcceleratorEntriesUsed 1.3.6.1.4.1.12740.2.1.22.1.9
This field specifies number of i/o's that are currently mapped to SSD space
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberSEDEncryptionTable 1.3.6.1.4.1.12740.2.1.23
EqualLogic-Dynamic member encryption shares for SED disks
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberSEDEncryptionEntry

eqlMemberSEDEncryptionEntry 1.3.6.1.4.1.12740.2.1.23.1
An entry (row) containing SED Encryption Key info
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberSEDEncryptionEntry  

eqlMemberSEDEncryptionRowStatus 1.3.6.1.4.1.12740.2.1.23.1.1
This field is used indicate the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlMemberSEDEncryptionShare1 1.3.6.1.4.1.12740.2.1.23.1.2
This field is for the first retrieved SED backup key.
Status: current Access: read-create
OBJECT-TYPE    
  EqlMemberSEDShareType  

eqlMemberSEDEncryptionShare2 1.3.6.1.4.1.12740.2.1.23.1.3
This field is for the second retrieved SED backup key.
Status: current Access: read-create
OBJECT-TYPE    
  EqlMemberSEDShareType  

eqlMemberSEDEncryptionShare3 1.3.6.1.4.1.12740.2.1.23.1.4
This field is for the third retrieved SED backup key.
Status: current Access: read-create
OBJECT-TYPE    
  EqlMemberSEDShareType  

eqlMemberDynamicOpsTable 1.3.6.1.4.1.12740.2.1.24
EqualLogic-Dynamic Member Operations Table. This table is for member operations that do not require persistent storage. Rows in this table should be used instead of eqlMemberOps.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberDynamicOpsEntry

eqlMemberDynamicOpsEntry 1.3.6.1.4.1.12740.2.1.24.1
An entry (row) containing Member operations configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberDynamicOpsEntry  

eqlMemberDynamicOpsOperation 1.3.6.1.4.1.12740.2.1.24.1.1
The current operation for this Member 0 - no operation 1 - delete old update kit
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), delete-pending(7)  

eqlMemberDynamicOpsOperationArg 1.3.6.1.4.1.12740.2.1.24.1.2
This field specifies the argument for the operation. There is no default.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

eqlMemberGroupInfoAtMemberTable 1.3.6.1.4.1.12740.2.1.25
EqualLogic-Persistent Member Group Info Known At Member Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberGroupInfoAtMemberEntry

eqlMemberGroupInfoAtMemberEntry 1.3.6.1.4.1.12740.2.1.25.1
An entry (row) containing Group info that in-use at this Member.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberGroupInfoAtMemberEntry  

eqlMemberGroupInfoAtMemberPasswd1 1.3.6.1.4.1.12740.2.1.25.1.1
The eqlGroupPasswd1 value that is currently in-use at this Member. Used by PSGD to insure that all Members are using the same eqlGroupPasswd1 value before deleting the backup password. Not null-terminated. Not printable characters.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..128)  

eqlMemberGroupInfoAtMemberPasswd1Len 1.3.6.1.4.1.12740.2.1.25.1.2
The number of octets in eqlMemberGroupInfoAtMemberPasswd1.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlDriveGroupStatisticsTable 1.3.6.1.4.1.12740.2.1.26
EqualLogic-Dynamic Storage Drive Group Statistics Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlDriveGroupStatisticsEntry

eqlDriveGroupStatisticsEntry 1.3.6.1.4.1.12740.2.1.26.1
An entry (row) containing drive group statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlDriveGroupStatisticsEntry  

eqlDriveGroupStatisticsIndex 1.3.6.1.4.1.12740.2.1.26.1.1
This field uniquely identifies a RAID Group within a member.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

eqlDriveGroupStatisticsHeadroom 1.3.6.1.4.1.12740.2.1.26.1.2
This field is the recent, estimated, and smoothed percentage by which the RAID Group is not utilized.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberFirmwareInfoTable 1.3.6.1.4.1.12740.2.1.27
EqualLogic-Dynamic Member Info Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberFirmwareInfoEntry

eqlMemberFirmwareInfoEntry 1.3.6.1.4.1.12740.2.1.27.1
An entry (row) containing member info
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberFirmwareInfoEntry  

eqlMemberLanguageVersion 1.3.6.1.4.1.12740.2.1.27.1.1
This field specifies the installed language kit version
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

eqlMemberFirmwareInfoDataReduction 1.3.6.1.4.1.12740.2.1.27.1.2
Current form of data reduction to be used on the member. The member must support the requested value in order for it to be set.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(0), disabled(1), no-capable-hardware(2), no-capable-raid(3), compression-running(4), compression-paused(5)  

eqlDriveGroupHeatProfileInfoTable 1.3.6.1.4.1.12740.2.1.28
EqualLogic-Dynamic Storage Drive Group Heat-Profile Information Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlDriveGroupHeatProfileInfoEntry

eqlDriveGroupHeatProfileInfoEntry 1.3.6.1.4.1.12740.2.1.28.1
An entry (row) identifying a per-drive-group heat profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlDriveGroupHeatProfileInfoEntry  

eqlDriveGroupHeatProfilePart 1.3.6.1.4.1.12740.2.1.28.1.1
If 1, the entire drive group, otherwise a part (possibly the only part).
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlDriveGroupHeatProfileColdCount 1.3.6.1.4.1.12740.2.1.28.1.2
The number of cold pages.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDriveGroupHeatProfileMinMagnitude 1.3.6.1.4.1.12740.2.1.28.1.3
The minimum access-rate magnitude. An access-rate magnitude is the rounded-down-to-integer logarithm base 2 of the access rate in accesses per second.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlDriveGroupHeatProfileMinMultiplier 1.3.6.1.4.1.12740.2.1.28.1.4
The minimum access-rate multiplier for the minimum access-rate magnitude. An access-rate multiplier is the fractional 32 bits added to 1.0 to constitute a multiplier, which when multiplied by 2 to the access-rate magnitude yields the access-rate floor of a bin of the histogram that is the heat profile.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlDriveGroupHeatProfileMaxMagnitude 1.3.6.1.4.1.12740.2.1.28.1.5
The maximum access-rate magnitude.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlDriveGroupHeatProfileMaxMultiplier 1.3.6.1.4.1.12740.2.1.28.1.6
The maximum access-rate multiplier for the maximum access-rate magnitude.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlDriveGroupHeatProfileBinTable 1.3.6.1.4.1.12740.2.1.29
EqualLogic-Dynamic Storage Drive Group Heat-Profile-Histogram Bins Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlDriveGroupHeatProfileBinEntry

eqlDriveGroupHeatProfileBinEntry 1.3.6.1.4.1.12740.2.1.29.1
An entry (row) representing one bin in the heat-profile histogram, telling how many pages covered by the heat profile have at least a certain access rate.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlDriveGroupHeatProfileBinEntry  

eqlDriveGroupHeatProfileBinId 1.3.6.1.4.1.12740.2.1.29.1.1
The identifier of the bin.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlDriveGroupHeatProfileAccessRateMagnitude 1.3.6.1.4.1.12740.2.1.29.1.2
The access-rate magnitude (cf. eqlDriveGroupHeatProfileMinMagnitude) for the bin.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlDriveGroupHeatProfileAccessRateMultiplier 1.3.6.1.4.1.12740.2.1.29.1.3
The access-rate multiplier (cf. eqlDriveGroupHeatProfileMinMultiplier) for the bin.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlDriveGroupHeatProfileCount 1.3.6.1.4.1.12740.2.1.29.1.4
The number of pages having the access-rate floor of the bin.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlTaggedHeatProfileInfoTable 1.3.6.1.4.1.12740.2.1.30
EqualLogic-Dynamic Storage Tagged Heat-Profile Information Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlTaggedHeatProfileInfoEntry

eqlTaggedHeatProfileInfoEntry 1.3.6.1.4.1.12740.2.1.30.1
An entry (row) identifying a quasi-per-volume heat profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlTaggedHeatProfileInfoEntry  

eqlTaggedHeatTag 1.3.6.1.4.1.12740.2.1.30.1.1
A tag identifying a heat profile that could apply to internal non-volume page usage, internal-volume usage, or external-volume usage. User volumes have tags of 128 or higher.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlTaggedHeatProfileColdCount 1.3.6.1.4.1.12740.2.1.30.1.2
The number of cold pages.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlTaggedHeatProfileMinMagnitude 1.3.6.1.4.1.12740.2.1.30.1.3
The minimum access-rate magnitude. An access-rate magnitude is the rounded-down-to-integer logarithm base 2 of the access rate in accesses per second.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlTaggedHeatProfileMinMultiplier 1.3.6.1.4.1.12740.2.1.30.1.4
The minimum access-rate multiplier for the minimum access-rate magnitude. An access-rate multiplier is the fractional 32 bits added to 1.0 to constitute a multiplier, which when multiplied by 2 to the access-rate magnitude yields the access-rate floor of a bin of the histogram that is the heat profile.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlTaggedHeatProfileMaxMagnitude 1.3.6.1.4.1.12740.2.1.30.1.5
The maximum access-rate magnitude.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlTaggedHeatProfileMaxMultiplier 1.3.6.1.4.1.12740.2.1.30.1.6
The maximum access-rate multiplier for the maximum access-rate magnitude.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlTaggedHeatProfileBinTable 1.3.6.1.4.1.12740.2.1.31
EqualLogic-Dynamic Storage Tagged Heat-Profile-Histogram Bins Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlTaggedHeatProfileBinEntry

eqlTaggedHeatProfileBinEntry 1.3.6.1.4.1.12740.2.1.31.1
An entry (row) representing one bin in the quasi-per-volume heat-profile histogram, telling how many pages covered by the heat profile have at least a certain access rate.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlTaggedHeatProfileBinEntry  

eqlTaggedHeatProfileBinId 1.3.6.1.4.1.12740.2.1.31.1.1
The identifier of the bin.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlTaggedHeatProfileAccessRateMagnitude 1.3.6.1.4.1.12740.2.1.31.1.2
The access-rate magnitude (cf. eqlTaggedHeatProfileMinMagnitude) for the bin.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlTaggedHeatProfileAccessRateMultiplier 1.3.6.1.4.1.12740.2.1.31.1.3
The access-rate multiplier (cf. eqlTaggedHeatProfileMinMultiplier) for the bin.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlTaggedHeatProfileCount 1.3.6.1.4.1.12740.2.1.31.1.4
The number of pages having the access-rate floor of the bin.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberRaidPoliciesTable 1.3.6.1.4.1.12740.2.1.32
EqualLogic-Dynamic Member Raid Policies Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberRaidPoliciesEntry

eqlMemberRaidPoliciesEntry 1.3.6.1.4.1.12740.2.1.32.1
An entry (row) represents a RAID policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberRaidPoliciesEntry  

eqlMemberRaidPoliciesBehavior 1.3.6.1.4.1.12740.2.1.32.1.1
The behavior to be followed for this RAID policy based on the current RAID policy, the effective drive capacity and the platform. Behavior always means the RAID policy is always configurable. Behavior never means the RAID policy is never configurable. Behavior cli means the RAID policy is configurable via CLI only. Behavior cliSanHQ means the RAID policy is configurable via CLI only and SanHQ will monitor and report on its usage.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER always(1), never(2), cli(3), cliSanHQ(4)  

eqlMemberRaidPoliciesRAIDCapacity 1.3.6.1.4.1.12740.2.1.32.1.2
The estimated RAID capacity in mega-bytes of the RAID set if using this RAID policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberPerTCPConnectionStatsTable 1.3.6.1.4.1.12740.2.1.33
EqualLogic-Dynamic Storage Member Per TCP Connection Statistics Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlMemberPerTCPConnectionStatsEntry

eqlMemberPerTCPConnectionStatsEntry 1.3.6.1.4.1.12740.2.1.33.1
An entry (row) of a member's per TCP connection statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlMemberPerTCPConnectionStatsEntry  

eqlMemberPerTCPConnectionStatsIndex 1.3.6.1.4.1.12740.2.1.33.1.1
An arbitrary integer used to uniquely identify a particular connection. The index may change between requests.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberPerTCPConnectionStatsLocalAddrType 1.3.6.1.4.1.12740.2.1.33.1.2
The local IP address type (ipv4 or ipv6) of the connection.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

eqlMemberPerTCPConnectionStatsLocalAddr 1.3.6.1.4.1.12740.2.1.33.1.3
The local IP address of the connection.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

eqlMemberPerTCPConnectionStatsLocalPort 1.3.6.1.4.1.12740.2.1.33.1.4
The local port of the connection.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberPerTCPConnectionStatsForeignAddrType 1.3.6.1.4.1.12740.2.1.33.1.5
The foreign IP address type(ipv4 or ipv6) of the connection.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

eqlMemberPerTCPConnectionStatsForeignAddr 1.3.6.1.4.1.12740.2.1.33.1.6
The foreign IP address of the connection.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

eqlMemberPerTCPConnectionStatsForeignPort 1.3.6.1.4.1.12740.2.1.33.1.7
The foreign port of the connection.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberPerTCPConnectionStatsMss 1.3.6.1.4.1.12740.2.1.33.1.8
The TCP maximum segment size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlMemberPerTCPConnectionStatsState 1.3.6.1.4.1.12740.2.1.33.1.9
The TCP state of the connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tcps-closed(0), tcps-listen(1), tcps-syn-sent(2), tcps-syn-received(3), tcps-established(4), tcps-close-wait(5), tcps-fin-wait1(6), tcps-closing(7), tcps-last-ack(8), tcps-fin-wait2(9), tcps-time-wait(10)  

eqlMemberPerTCPConnectionStatsSndpack 1.3.6.1.4.1.12740.2.1.33.1.10
The number of data packets sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberPerTCPConnectionStatsSndbyte 1.3.6.1.4.1.12740.2.1.33.1.11
The number of data bytes sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberPerTCPConnectionStatsSndrexmitpack 1.3.6.1.4.1.12740.2.1.33.1.12
The number of data packets retransmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberPerTCPConnectionStatsSndrexmitbyte 1.3.6.1.4.1.12740.2.1.33.1.13
The number of data bytes retransmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberPerTCPConnectionStatsRexmttimeout 1.3.6.1.4.1.12740.2.1.33.1.14
The number of retransmit timeouts(slow start counter).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberPerTCPConnectionStatsFastrexmt 1.3.6.1.4.1.12740.2.1.33.1.15
The number of fast retransmits.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberPerTCPConnectionStatsSndprobe 1.3.6.1.4.1.12740.2.1.33.1.16
The number of window probes sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberPerTCPConnectionStatsRcvpack 1.3.6.1.4.1.12740.2.1.33.1.17
The number of packets received in sequence.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberPerTCPConnectionStatsRcvbyte 1.3.6.1.4.1.12740.2.1.33.1.18
The number of bytes received in sequence.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberPerTCPConnectionStatsRcvwinprobe 1.3.6.1.4.1.12740.2.1.33.1.19
The number of received window probe packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlMemberPerTCPConnectionStatsRcvbadsum 1.3.6.1.4.1.12740.2.1.33.1.20
The number of packets received with checksum errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64