EQLSTORAGEPOOL-MIB

File: EQLSTORAGEPOOL-MIB.mib (56607 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC EQUALLOGIC-SMI
EQLGROUP-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Counter64 Integer32 TimeTicks
enterprises IpAddress DateAndTime
RowPointer TruthValue RowStatus
DisplayString equalLogic eqlGroupId
eqlStorageGroupAdminAccountIndex UTFString eqlLdapLoginAccessName
eqlLdapLoginAccessType eqlStorageGroupAdminAccountName

Defined Types

SiteIndex  
This textual convention defines a greater than zero value used to identify an external group operating autonomously from the local group.
TEXTUAL-CONVENTION    
  Integer32 1..2147483647  

SiteIndexOrZero  
This textual convention is an extension of the SiteIndex convention. The latter defines a greater than zero value used to identify an external group operating autonomously from the local group. This extension permits the additional value of zero. the value zero is object-specific and must therefore be defined as part of the description of any object which uses this syntax. Examples of the usage of zero might include situations where the site is unknown or not relevant
TEXTUAL-CONVENTION    
  Integer32 0..2147483647  

Unsigned64  
A non-negative 64-bit bit integer, without counter semantics.
TEXTUAL-CONVENTION    
  Counter64  

PoolQuotaType  
The format of the adminQuota value: 0 - Unlimited quota, 1 - Size in Megabytes.
TEXTUAL-CONVENTION    
  INTEGER none(0), size(1)  

StatusEnabledDefault  
This textual convention can be used to define a status of enabled or disabled. The value 0 is assigned to enabled
TEXTUAL-CONVENTION    
  INTEGER enabled(0), disabled(1)  

EqlStoragePoolEntry  
SEQUENCE    
  eqlStoragePoolIndex Unsigned32
  eqlStoragePoolRowStatus RowStatus
  eqlStoragePoolName UTFString
  eqlStoragePoolDefaultFlag TruthValue
  eqlStoragePoolRAIDConfigWaitFlag TruthValue
  eqlStoragePoolShouldEvalMask Unsigned32
  eqlStoragePoolLastBalance Unsigned32
  eqlStoragePoolDescription DisplayString
  eqlStoragePoolLeadMemberId Unsigned32
  eqlStoragePoolUUID OCTET STRING
  eqlStoragePoolExecMergeTo Unsigned32
  eqlStoragePoolBorrow StatusEnabledDefault
  eqlStoragePoolSnapTrimThreshold Unsigned32
  eqlStoragePoolSnapTrimBuffer Counter64
  eqlStoragePoolSnapTrimmerHWMLifeTime Integer32
  eqlStoragePoolSnapTrimmerBorrowInfoRefreshInterval Integer32
  eqlStoragePoolDefaultCompressionStrategy INTEGER
  eqlStoragePoolDefaultCompressionMinSnapDelay Integer32
  eqlStoragePoolDefaultCompressionMinSnapAge Integer32
  eqlStoragePoolSnapMemberTrimThresholdAmount Counter64
  eqlStoragePoolSnapTrimRecheckTimer Unsigned32

EqlStoragePoolStatsEntry  
SEQUENCE    
  eqlStoragePoolStatsSpace Counter64
  eqlStoragePoolStatsSpaceUsed Counter64
  eqlStoragePoolStatsFreeSpace Counter64
  eqlStoragePoolStatsReplicationSpace Counter64
  eqlStoragePoolStatsReplicationSpaceUsed Counter64
  eqlStoragePoolStatsReplicationFreeSpace Counter64
  eqlStoragePoolStatsMemberNumOnline Integer32
  eqlStoragePoolStatsMemberCount Integer32
  eqlStoragePoolStatsSnapshotReserved Counter64
  eqlStoragePoolStatsSnapshotUsed Counter64
  eqlStoragePoolStatsSnapshotNumInUse Integer32
  eqlStoragePoolStatsSnapshotNumOnline Integer32
  eqlStoragePoolStatsSnapshotCount Integer32
  eqlStoragePoolStatsVolumeNumInUse Integer32
  eqlStoragePoolStatsVolumeNumOnline Integer32
  eqlStoragePoolStatsVolumeCount Integer32
  eqlStoragePoolStatsDelegatedSpace Counter64
  eqlStoragePoolStatsDelegatedSpaceUsed Counter64
  eqlStoragePoolStatsMembersInUse Integer32
  eqlStoragePoolStatsVolumeSubscribed Counter64
  eqlStoragePoolStatsVolumeSpaceAllocated Counter64
  eqlStoragePoolStatsFailbackSpace Counter64
  eqlStoragePoolStatsThinProvFreeSpace Counter64
  eqlStoragePoolStatsConnectionCount Integer32
  eqlStoragePoolStatsSnapshotResvFreeSpace Counter64
  eqlStoragePoolStatsVirtualVolumeNumInUse Integer32
  eqlStoragePoolStatsVirtualVolumeNumOnline Integer32
  eqlStoragePoolStatsSnapshotResvBorrowing Counter64
  eqlStoragePoolStatsFreeSpaceBorrowing Counter64
  eqlStoragePoolStatsAvailableForBorrowing Counter64
  eqlStoragePoolStatsRecoverableVolBorrowing Counter64
  eqlStoragePoolStatsActualFreeSpace Counter64
  eqlStoragePoolStatsTotalSpaceBorrowing Counter64
  eqlStoragePoolStatsSnapShotBorrowing Counter64
  eqlStoragePoolStatsStorageContainerCount Integer32
  eqlStoragePoolStatsStorageContainerSpaceReserved Counter64
  eqlStoragePoolStatsCompressedSpaceUsed Counter64
  eqlStoragePoolStatsVirtualSpaceSize Counter64
  eqlStoragePoolStatsStorageContainerVolumeCount Integer32
  eqlStoragePoolStatsStorageContainerSnapCount Integer32
  eqlStoragePoolStatsStorageContainerVolumesOnline Integer32

EqlStoragePoolAdminAccountEntry  
SEQUENCE    
  eqlStoragePoolAdminAccountRowStatus RowStatus
  eqlStoragePoolAdminAccountQuotaType PoolQuotaType
  eqlStoragePoolAdminAccountQuota Unsigned32

EqlAdminAccountStoragePoolEntry  
SEQUENCE    
  eqlAdminAccountStoragePoolAccess INTEGER

EqlStoragePoolOpsEntry  
SEQUENCE    
  eqlStoragePoolOpsIndex Unsigned32
  eqlStoragePoolOpsRowStatus RowStatus
  eqlStoragePoolOpsOperation INTEGER
  eqlStoragePoolOpsStoragePoolDestinationIndex Unsigned32

EqlStoragePoolAdminAccountStatsEntry  
SEQUENCE    
  eqlStorageAdminAccountPoolStatsQuota Unsigned64
  eqlStorageAdminAccountPoolStatsQuotaUsed Unsigned64
  eqlStorageAdminAccountPoolStatsQuotaAvailable Unsigned64
  eqlStorageAdminAccountPoolStatsSnapshotReserved Unsigned64
  eqlStorageAdminAccountPoolStatsSnapshotUsed Unsigned64
  eqlStorageAdminAccountPoolStatsSnapshotSubscribed Unsigned64
  eqlStorageAdminAccountPoolStatsSnapshotNumInUse Integer32
  eqlStorageAdminAccountPoolStatsSnapshotNumOnline Integer32
  eqlStorageAdminAccountPoolStatsSnapshotCount Integer32
  eqlStorageAdminAccountPoolStatsVolumeNumInUse Integer32
  eqlStorageAdminAccountPoolStatsVolumeNumOnline Integer32
  eqlStorageAdminAccountPoolStatsVolumeCount Integer32
  eqlStorageAdminAccountPoolStatsVolumeSubscribed Unsigned64
  eqlStorageAdminAccountPoolStatsVolumeQuotaUsage Unsigned64
  eqlStorageAdminAccountPoolStatsVolumeSpaceAllocated Unsigned64
  eqlStorageAdminAccountPoolStatsFailbackSpace Unsigned64
  eqlStorageAdminAccountPoolStatsFailbackSubscribed Unsigned64
  eqlStorageAdminAccountPoolStatsThinProvFreeSpace Unsigned64
  eqlStorageAdminAccountPoolStatsConnectionCount Integer32
  eqlStorageAdminAccountPoolStatsSnapshotResvFreeSpace Unsigned64
  eqlStorageAdminAccountPoolStatsSpaceUsed Unsigned64

EqlLdapLoginAccessPoolEntry  
SEQUENCE    
  eqlLdapLoginAccessPoolQuotaType PoolQuotaType
  eqlLdapLoginAccessPoolQuota Unsigned32
  eqlLdapLoginAccessPoolQuotaRowStatus RowStatus

EqlStoragePoolOperStatusEntry  
SEQUENCE    
  eqlStoragePoolOperStatusCompression INTEGER

Defined Values

eqlStoragePoolModule 1.3.6.1.4.1.12740.16
Equallogic Inc. Storage Array volume information Copyright (c) 2002-2011 by Dell, Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell, Inc. This software embodies proprietary information and trade secrets of Dell, Inc.
MODULE-IDENTITY    

eqlStoragePoolObjects 1.3.6.1.4.1.12740.16.1
OBJECT IDENTIFIER    

eqlStoragePoolNotifications 1.3.6.1.4.1.12740.16.2
OBJECT IDENTIFIER    

eqlStoragePoolConformance 1.3.6.1.4.1.12740.16.3
OBJECT IDENTIFIER    

eqlStoragePoolTable 1.3.6.1.4.1.12740.16.1.1
EqualLogic-Persistent Storage Pool Table. This table contains a list of storage pools in a group and their attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStoragePoolEntry

eqlStoragePoolEntry 1.3.6.1.4.1.12740.16.1.1.1
An entry (row) containing storage pool info.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStoragePoolEntry  

eqlStoragePoolIndex 1.3.6.1.4.1.12740.16.1.1.1.1
This field specifies a unique index for identifying a storage pool.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlStoragePoolRowStatus 1.3.6.1.4.1.12740.16.1.1.1.2
This field is used indicate the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlStoragePoolName 1.3.6.1.4.1.12740.16.1.1.1.3
EQL-SECONDARY-KEY This field specifies a user friendly name for a storage pool. The name must be unique within a group. The name must not contain spaces or special characters. The name can be up to 64 characters in length.
Status: current Access: read-create
OBJECT-TYPE    
  UTFString Size(1..64)  

eqlStoragePoolDefaultFlag 1.3.6.1.4.1.12740.16.1.1.1.4
This field specifies if this storage pool is the default pool. TRUE == default pool.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

eqlStoragePoolRAIDConfigWaitFlag 1.3.6.1.4.1.12740.16.1.1.1.5
This field specifies if the system should wait for a configured RAID-set before allowing volumes to be created.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlStoragePoolShouldEvalMask 1.3.6.1.4.1.12740.16.1.1.1.6
This field specifies one or more reasons (32-bit mask) the pool should be evaluated.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStoragePoolLastBalance 1.3.6.1.4.1.12740.16.1.1.1.7
This field specifies a timestamp of the last time the pool was balanced.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStoragePoolDescription 1.3.6.1.4.1.12740.16.1.1.1.8
This field contains a description of the storage pool.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

eqlStoragePoolLeadMemberId 1.3.6.1.4.1.12740.16.1.1.1.9
This field is deprecated and will be unsupported in the next release.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlStoragePoolUUID 1.3.6.1.4.1.12740.16.1.1.1.10
EQL-SECONDARY-KEY This field is for internal use only.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(16)  

eqlStoragePoolExecMergeTo 1.3.6.1.4.1.12740.16.1.1.1.11
This field, when non-zero, specifies the index of the storage pool that this pool is being merged into.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlStoragePoolBorrow 1.3.6.1.4.1.12740.16.1.1.1.12
This field specifies if borrowing is enabled for this pool.
Status: current Access: read-write
OBJECT-TYPE    
  StatusEnabledDefault  

eqlStoragePoolSnapTrimThreshold 1.3.6.1.4.1.12740.16.1.1.1.13
This field specifies the threshold % of the pool capacity that indicates when to begin trimming.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100  

eqlStoragePoolSnapTrimBuffer 1.3.6.1.4.1.12740.16.1.1.1.14
This field specifies how far below the SnapTrimThreshold to trim in MB.
Status: current Access: read-write
OBJECT-TYPE    
  Counter64  

eqlStoragePoolSnapTrimmerHWMLifeTime 1.3.6.1.4.1.12740.16.1.1.1.15
This field defines the amount of time (in secs) that the trimmer will use Volume In Use HWM to calculate the borrowed space for the thin volume. Default is 10 days
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eqlStoragePoolSnapTrimmerBorrowInfoRefreshInterval 1.3.6.1.4.1.12740.16.1.1.1.16
This field defines the amount of time (in secs) after which the snap trimmer will attempt to refresh its borrow information
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eqlStoragePoolDefaultCompressionStrategy 1.3.6.1.4.1.12740.16.1.1.1.17
Default value for how compression for snapshots should be set if not specified.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER automatic(0), always(1), never(2)  

eqlStoragePoolDefaultCompressionMinSnapDelay 1.3.6.1.4.1.12740.16.1.1.1.18
The value of this object represents how long to wait prior to marking a snapshot as eligible for automatic compression. Current default is 10 minutes.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

eqlStoragePoolDefaultCompressionMinSnapAge 1.3.6.1.4.1.12740.16.1.1.1.19
The value of this object represents the minimum amout of time a snapshot is expected to kept around in order to be marked for automatic compression. Current default is 23 hours.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

eqlStoragePoolSnapMemberTrimThresholdAmount 1.3.6.1.4.1.12740.16.1.1.1.20
This field specifies the per member trimming threshold used by the trimmer in MB. The default value of 204800 MB (200 GB) represents the minimum value for this field.
Status: current Access: read-write
OBJECT-TYPE    
  Counter64  

eqlStoragePoolSnapTrimRecheckTimer 1.3.6.1.4.1.12740.16.1.1.1.21
This field defines the interval (in seconds) that will be used to determine if trimming needs to occur.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlStoragePoolStatsTable 1.3.6.1.4.1.12740.16.1.2
EqualLogic-Dynamic Storage Pool Statistics Table. This table contains a list of pools in a group and their statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStoragePoolStatsEntry

eqlStoragePoolStatsEntry 1.3.6.1.4.1.12740.16.1.2.1
An entry (row) containing storage pool stats.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStoragePoolStatsEntry  

eqlStoragePoolStatsSpace 1.3.6.1.4.1.12740.16.1.2.1.1
This field specifies how many MB of space comprises this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsSpaceUsed 1.3.6.1.4.1.12740.16.1.2.1.2
This field specifies the space used by volumes in this pool. The value is represented in MB. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsFreeSpace 1.3.6.1.4.1.12740.16.1.2.1.3
This field specifies how many MB of space is available in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsReplicationSpace 1.3.6.1.4.1.12740.16.1.2.1.4
This field specifies how many MB of space is allocated for replication in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsReplicationSpaceUsed 1.3.6.1.4.1.12740.16.1.2.1.5
This field specifies how many MB of space is currently utilized by replication in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsReplicationFreeSpace 1.3.6.1.4.1.12740.16.1.2.1.6
This field specifies how many MB of space is available to replication in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsMemberNumOnline 1.3.6.1.4.1.12740.16.1.2.1.7
This field indicates how many members are online in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolStatsMemberCount 1.3.6.1.4.1.12740.16.1.2.1.8
This field indicates how many total members are in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolStatsSnapshotReserved 1.3.6.1.4.1.12740.16.1.2.1.9
This field specifies how many MB of snapshot space is reserved in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsSnapshotUsed 1.3.6.1.4.1.12740.16.1.2.1.10
This field specifies how many MB of snapshot space is currently utilized in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsSnapshotNumInUse 1.3.6.1.4.1.12740.16.1.2.1.11
This field indicates how many snapshots are currently in use in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolStatsSnapshotNumOnline 1.3.6.1.4.1.12740.16.1.2.1.12
This field indicates how many snapshots are online in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolStatsSnapshotCount 1.3.6.1.4.1.12740.16.1.2.1.13
This field indicates how many total snapshots are in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolStatsVolumeNumInUse 1.3.6.1.4.1.12740.16.1.2.1.14
This field indicates how many volumes are currently in use in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolStatsVolumeNumOnline 1.3.6.1.4.1.12740.16.1.2.1.15
This field indicates how many volumes are online in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolStatsVolumeCount 1.3.6.1.4.1.12740.16.1.2.1.16
This field indicates how many total volumes are in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolStatsDelegatedSpace 1.3.6.1.4.1.12740.16.1.2.1.17
This field indicates the total delegated space for partners in this pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsDelegatedSpaceUsed 1.3.6.1.4.1.12740.16.1.2.1.18
This field indicates the total delegated space used by partners in this pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsMembersInUse 1.3.6.1.4.1.12740.16.1.2.1.19
This field indicates the total members of online+offline members in this group. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolStatsVolumeSubscribed 1.3.6.1.4.1.12740.16.1.2.1.20
This field specifies the total subscribed space for all volumes in this pool. For a thin provisioned volume, subscribed space is the advertised space. For a regular volume, subscribed space is the volume size. The value of this field will be equal to sum of eqliscsiVolumeSize field for all volumes in this pool.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsVolumeSpaceAllocated 1.3.6.1.4.1.12740.16.1.2.1.21
The value of this object represents the sum of actual materialized pages for all volumes in the pool.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsFailbackSpace 1.3.6.1.4.1.12740.16.1.2.1.22
This field represents the amount of space consumed by fail-back replicasets in this pool.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsThinProvFreeSpace 1.3.6.1.4.1.12740.16.1.2.1.23
This field represents the amount of space available for Thin Provisioned Volumes in this pool.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsConnectionCount 1.3.6.1.4.1.12740.16.1.2.1.24
This field gives the number of iSCSI connections that are currently connected to volumes in this pool.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolStatsSnapshotResvFreeSpace 1.3.6.1.4.1.12740.16.1.2.1.25
This field specifies how many MB of space is available to Snapshots in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsVirtualVolumeNumInUse 1.3.6.1.4.1.12740.16.1.2.1.26
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolStatsVirtualVolumeNumOnline 1.3.6.1.4.1.12740.16.1.2.1.27
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolStatsSnapshotResvBorrowing 1.3.6.1.4.1.12740.16.1.2.1.28
This field specifies the amount of free snapshot reserve that is being borrowed against by other volumes for either Recoverable Volumes or snapshots
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsFreeSpaceBorrowing 1.3.6.1.4.1.12740.16.1.2.1.29
This field specifies the amount of free space that is being borrowed against by volumes for either Recoverable Volumes or snapshots
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsAvailableForBorrowing 1.3.6.1.4.1.12740.16.1.2.1.30
This field specifies how many MB of space is still avaiable in this storage pool to borrow against.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsRecoverableVolBorrowing 1.3.6.1.4.1.12740.16.1.2.1.31
This field specifies the total amount of free space (in MB) that soft-deleted (i.e. recoverable) volumes are consuming in this pool. Recoverable volumes are permanently deleted by the array whenever the free space that they occupy is needed by the system.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsActualFreeSpace 1.3.6.1.4.1.12740.16.1.2.1.32
This field specifies the actual free space (in MB) that doesn't include soft-deleted (i.e. recoverable) volumes or borrowed space
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsTotalSpaceBorrowing 1.3.6.1.4.1.12740.16.1.2.1.33
This field specifies the total space used for borrowing and includes Recoverable Volumes and Snapshots
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsSnapShotBorrowing 1.3.6.1.4.1.12740.16.1.2.1.34
This field specifies the total amount of borrowing for just snapshots
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsStorageContainerCount 1.3.6.1.4.1.12740.16.1.2.1.35
This field specifies the total amount number of storage containers in the pool
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolStatsStorageContainerSpaceReserved 1.3.6.1.4.1.12740.16.1.2.1.36
This field specifies the total amount of pool space allocated to storage containers. The value is represented in MB. It is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsCompressedSpaceUsed 1.3.6.1.4.1.12740.16.1.2.1.37
This field specifies how many MB of space is currently utilized for compressed pages in this storage pool. This is a dynamic value and cannot be set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsVirtualSpaceSize 1.3.6.1.4.1.12740.16.1.2.1.38
This field specifies how many MB of space would be utilized by compressed pages in this pool if there was no compression.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStoragePoolStatsStorageContainerVolumeCount 1.3.6.1.4.1.12740.16.1.2.1.39
This field indicates the total volumes in storage containers within this this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolStatsStorageContainerSnapCount 1.3.6.1.4.1.12740.16.1.2.1.40
This field indicates the total snapshots in storage containers within this this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolStatsStorageContainerVolumesOnline 1.3.6.1.4.1.12740.16.1.2.1.41
This field indicates the total online volumes in storage containers within this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStoragePoolAdminAccountTable 1.3.6.1.4.1.12740.16.1.3
EqualLogic-Persistent Admin Account Storage Pool Table. This table contains a list of privilege matchings of administrative accounts and the pools those administrators have access to.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStoragePoolAdminAccountEntry

eqlStoragePoolAdminAccountEntry 1.3.6.1.4.1.12740.16.1.3.1
An entry (row) containing mapping of administrative accounts and their pool access.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStoragePoolAdminAccountEntry  

eqlStoragePoolAdminAccountRowStatus 1.3.6.1.4.1.12740.16.1.3.1.1
This field is used indicate the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlStoragePoolAdminAccountQuotaType 1.3.6.1.4.1.12740.16.1.3.1.2
The format of the adminQuota value: 0 - Unlimited quota, 1 - Size in Megabytes. This field applies only to Volume Administrators.
Status: current Access: read-create
OBJECT-TYPE    
  PoolQuotaType  

eqlStoragePoolAdminAccountQuota 1.3.6.1.4.1.12740.16.1.3.1.3
This field specifies the storage space quota (in MB) for a Volume Administrator in the storage pool. This field applies only to Volume Administrators.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlAdminAccountStoragePoolTable 1.3.6.1.4.1.12740.16.1.4
EqualLogic-Dynamic table indicating the access an administrator has to a storage pool.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlAdminAccountStoragePoolEntry

eqlAdminAccountStoragePoolEntry 1.3.6.1.4.1.12740.16.1.4.1
An entry (row) containing the access privilege.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlAdminAccountStoragePoolEntry  

eqlAdminAccountStoragePoolAccess 1.3.6.1.4.1.12740.16.1.4.1.1
The administrative permission to a storage pool.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER read-only(1), read-write(2)  

eqlStoragePoolOpsTable 1.3.6.1.4.1.12740.16.1.5
EqualLogic-Persistent Storage Pool Operations Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStoragePoolOpsEntry

eqlStoragePoolOpsEntry 1.3.6.1.4.1.12740.16.1.5.1
An entry (row) containing storage pool configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStoragePoolOpsEntry  

eqlStoragePoolOpsIndex 1.3.6.1.4.1.12740.16.1.5.1.1
This field unique identifies an operation withing a storage pool.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlStoragePoolOpsRowStatus 1.3.6.1.4.1.12740.16.1.5.1.2
This field is used indicate the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlStoragePoolOpsOperation 1.3.6.1.4.1.12740.16.1.5.1.3
The current operation for this drive group 0 - no operation 1 - delete/merge
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), delete(1)  

eqlStoragePoolOpsStoragePoolDestinationIndex 1.3.6.1.4.1.12740.16.1.5.1.4
This field unique identifies the destination Storage Pool.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlStoragePoolAdminAccountStatsTable 1.3.6.1.4.1.12740.16.1.6
EqualLogic-Dynamic Storage Pool Admin Account Statistics Table. This table contains a list of pools in a group and their statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStoragePoolAdminAccountStatsEntry

eqlStoragePoolAdminAccountStatsEntry 1.3.6.1.4.1.12740.16.1.6.1
An entry (row) containing storage pool admin account stats.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStoragePoolAdminAccountStatsEntry  

eqlStorageAdminAccountPoolStatsQuota 1.3.6.1.4.1.12740.16.1.6.1.1
This field specifies how many MB of quota comprises this storage pool for this account. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned64  

eqlStorageAdminAccountPoolStatsQuotaUsed 1.3.6.1.4.1.12740.16.1.6.1.2
This field specifies the number of MB used by volumes in this pool for this account. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned64  

eqlStorageAdminAccountPoolStatsQuotaAvailable 1.3.6.1.4.1.12740.16.1.6.1.3
This field specifies how many MB of space is available in this storage pool for this account. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned64  

eqlStorageAdminAccountPoolStatsSnapshotReserved 1.3.6.1.4.1.12740.16.1.6.1.4
This field specifies how many MB of snapshot space is reserved in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned64  

eqlStorageAdminAccountPoolStatsSnapshotUsed 1.3.6.1.4.1.12740.16.1.6.1.5
This field specifies how many MB of snapshot space is currently utilized in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned64  

eqlStorageAdminAccountPoolStatsSnapshotSubscribed 1.3.6.1.4.1.12740.16.1.6.1.6
This field specifies the total subscribed space for all snapshots in this pool. For a snapshot of a thin provisioned volume, subscribed space is the advertised space. For a snapshot of a classic volume, subscribed space is the volume size. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned64  

eqlStorageAdminAccountPoolStatsSnapshotNumInUse 1.3.6.1.4.1.12740.16.1.6.1.7
This field indicates how many snapshots are currently in use in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageAdminAccountPoolStatsSnapshotNumOnline 1.3.6.1.4.1.12740.16.1.6.1.8
This field indicates how many snapshots are online in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageAdminAccountPoolStatsSnapshotCount 1.3.6.1.4.1.12740.16.1.6.1.9
This field indicates how many total snapshots are in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageAdminAccountPoolStatsVolumeNumInUse 1.3.6.1.4.1.12740.16.1.6.1.10
This field indicates how many volumes are currently in use in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageAdminAccountPoolStatsVolumeNumOnline 1.3.6.1.4.1.12740.16.1.6.1.11
This field indicates how many volumes are online in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageAdminAccountPoolStatsVolumeCount 1.3.6.1.4.1.12740.16.1.6.1.12
This field indicates how many total volumes are in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageAdminAccountPoolStatsVolumeSubscribed 1.3.6.1.4.1.12740.16.1.6.1.13
This field specifies the total subscribed space for all volumes in this pool. For a thin provisioned volume, subscribed space is the advertised space. For a regular volume, subscribed space is the volume size. The value of this field will be equal to sum of eqliscsiVolumeSize field for all volumes in this pool.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned64  

eqlStorageAdminAccountPoolStatsVolumeQuotaUsage 1.3.6.1.4.1.12740.16.1.6.1.14
This field specifies the total MB against the quota for all volumes in this pool. The space contributed by a regular volume is its volume size. The sapce contributed by a thin provisioned volume is its max grow size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned64  

eqlStorageAdminAccountPoolStatsVolumeSpaceAllocated 1.3.6.1.4.1.12740.16.1.6.1.15
The value of this object represents the sum of actual materialized pages for all volumes in the pool.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned64  

eqlStorageAdminAccountPoolStatsFailbackSpace 1.3.6.1.4.1.12740.16.1.6.1.16
This field represents the amount of space consumed by fail-back replicasets in this pool.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned64  

eqlStorageAdminAccountPoolStatsFailbackSubscribed 1.3.6.1.4.1.12740.16.1.6.1.17
This field specifies the total subscribed space for failback for all volumes in this pool. For the failback of a thin provisioned volume, subscribed space is the advertised space. For a failabck of a classic volume, subscribed space is the volume size. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned64  

eqlStorageAdminAccountPoolStatsThinProvFreeSpace 1.3.6.1.4.1.12740.16.1.6.1.18
This field represents the amount of space available for Thin Provisioned Volumes in this pool.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned64  

eqlStorageAdminAccountPoolStatsConnectionCount 1.3.6.1.4.1.12740.16.1.6.1.19
This field gives the number of iSCSI connections that are currently connected to volumes in this pool.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageAdminAccountPoolStatsSnapshotResvFreeSpace 1.3.6.1.4.1.12740.16.1.6.1.20
This field specifies how many MB of space is available to Snapshots in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned64  

eqlStorageAdminAccountPoolStatsSpaceUsed 1.3.6.1.4.1.12740.16.1.6.1.21
This field specifies how many MB of space currently used by this account in this storage pool. This is a dynamic value, it is not Administrator setable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned64  

eqlLdapLoginAccessPoolTable 1.3.6.1.4.1.12740.16.1.7
EqualLogic-Persistent Group LDAP login access group table. For LDAP login access configured with volume-admin this table stores the pool-quota information. For LDAP login access configured with pool-admin privilege this tables stores the pools that belong to the pool-admin
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlLdapLoginAccessPoolEntry

eqlLdapLoginAccessPoolEntry 1.3.6.1.4.1.12740.16.1.7.1
An entry (row) containing the configuration for the LDAP login access pool information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlLdapLoginAccessPoolEntry  

eqlLdapLoginAccessPoolQuotaType 1.3.6.1.4.1.12740.16.1.7.1.1
The format of the adminQuota value: 0 - Unlimited quota, 1 - Size in Megabytes. This field applies only to the LDAP login access that have Volume Admin Privilege.
Status: current Access: read-create
OBJECT-TYPE    
  PoolQuotaType  

eqlLdapLoginAccessPoolQuota 1.3.6.1.4.1.12740.16.1.7.1.2
This field specifies the pool quota (in MB) for a each Volume Administrator using the LDAP login access. This field applies only to Volume Administrators.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlLdapLoginAccessPoolQuotaRowStatus 1.3.6.1.4.1.12740.16.1.7.1.3
This field is used indicate the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlStoragePoolOperStatusTable 1.3.6.1.4.1.12740.16.1.8
EqualLogic-Dynamic Storage Pool Operational Status Table. This table contains the list of operational status for each pool.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStoragePoolOperStatusEntry

eqlStoragePoolOperStatusEntry 1.3.6.1.4.1.12740.16.1.8.1
An entry (row) containing a storage pool operational status.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStoragePoolOperStatusEntry  

eqlStoragePoolOperStatusCompression 1.3.6.1.4.1.12740.16.1.8.1.1
This field the operational status of data optimization this pool.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1), paused(2), no-capable-hardware(3), no-capable-raid(4), unknown(5)