EQUIPMENT-MIB

File: EQUIPMENT-MIB.mib (54637 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC Q-BRIDGE-MIB
TIMERANGE-MIB DLINK-ID-REC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE DateAndTime
TruthValue DisplayString RowStatus
PortList swTimeRangeMgmtRangeName AgentNotifyLevel
dlink-common-mgmt

Defined Types

MacAddress  
OCTET STRING Size(6)    

SwPowerEntry  
SEQUENCE    
  swPowerUnitIndex INTEGER
  swPowerID INTEGER
  swPowerStatus INTEGER

SwFanEntry  
SEQUENCE    
  swFanUnitIndex INTEGER
  swFanID INTEGER
  swFanStatus INTEGER
  swFanPostion INTEGER
  swFanNumber INTEGER
  swFanSpeed INTEGER

SwTemperatureEntry  
SEQUENCE    
  swTemperatureUnitIndex INTEGER
  swTemperatureCurrent INTEGER
  swTemperatureHighThresh INTEGER
  swTemperatureLowThresh INTEGER

SwUnitMgmtEntry  
SEQUENCE    
  swUnitMgmtId INTEGER
  swUnitMgmtMacAddr MacAddress
  swUnitMgmtStartPort INTEGER
  swUnitMgmtPortRange INTEGER
  swUnitMgmtFrontPanelLedStatus OCTET STRING
  swUnitMgmtCtrlMode INTEGER
  swUnitMgmtCurrentMode INTEGER
  swUnitMgmtVersion DisplayString
  swUnitMgmtModuleName DisplayString
  swUnitMgmtPromVersion DisplayString
  swUnitMgmtFirmwareVersion DisplayString
  swUnitMgmtHardwareVersion DisplayString
  swUnitMgmtPriority INTEGER
  swUnitMgmtUserSetState INTEGER
  swUnitMgmtExistState INTEGER
  swUnitMgmtBoxId INTEGER
  swUnitMgmtSerialNumber DisplayString

SwExternalAlarmEntry  
SEQUENCE    
  swExternalAlarmChannel INTEGER
  swExternalAlarmMessage DisplayString
  swExternalAlarmStatus INTEGER

SwEquipPowerSavingHibernationEntry  
SEQUENCE    
  swEquipPowerSavingHiberRowStatus RowStatus

SwEquipPowerSavingPortLedEntry  
SEQUENCE    
  swEquipPowerSavingPortLedRowStatus RowStatus

SwEquipPowerSavingPortEntry  
SEQUENCE    
  swEquipPowerSavingPortIndex INTEGER
  swEquipPowerSavingPortRowStatus RowStatus

SwExternalAlarmStackingEntry  
SEQUENCE    
  swExternalAlarmStackingUnitIndex INTEGER
  swExternalAlarmStackingChannel INTEGER
  swExternalAlarmStackingMessage DisplayString
  swExternalAlarmStackingStatus INTEGER

Defined Values

swEquipmentMIB 1.3.6.1.4.1.171.12.11
equipments MIB.
MODULE-IDENTITY    

swEquipment 1.3.6.1.4.1.171.12.11.1
OBJECT IDENTIFIER    

swEquipmentNotify 1.3.6.1.4.1.171.12.11.2
OBJECT IDENTIFIER    

swEquipmentCapacity 1.3.6.1.4.1.171.12.11.1.1
Indicates the equipment capability supported in the system.
Status: current Access: read-only
OBJECT-TYPE    
  BITS fanCapable(0), redundantPowerCapable(1), tempteratureDetection(2), stackingCapable(3), chassisCapable(4)  

swFanTrapState 1.3.6.1.4.1.171.12.11.1.4
Indicate the fan warning event trap state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swPowerTrapState 1.3.6.1.4.1.171.12.11.1.5
Indicate the power warning event trap state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swPowerTable 1.3.6.1.4.1.171.12.11.1.6
A list of power information values.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwPowerEntry

swPowerEntry 1.3.6.1.4.1.171.12.11.1.6.1
An entry of power information values.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwPowerEntry  

swPowerUnitIndex 1.3.6.1.4.1.171.12.11.1.6.1.1
Indicates the unit ID in the System.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swPowerID 1.3.6.1.4.1.171.12.11.1.6.1.2
Indicates ID of the power 1 : main power 2 : redundant power .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swPowerStatus 1.3.6.1.4.1.171.12.11.1.6.1.3
Indicates the current power status. lowVoltage : The voltage of the power unit is too low. overCurrent: The current of the power unit is too high. working : The power unit is working normally. fail : The power unit has failed. connect : The power unit is connected but not powered on. disconnect : The power unit is not connected.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(0), lowVoltage(1), overCurrent(2), working(3), fail(4), connect(5), disconnect(6)  

swFanTable 1.3.6.1.4.1.171.12.11.1.7
A list of fan information values.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwFanEntry

swFanEntry 1.3.6.1.4.1.171.12.11.1.7.1
An entry of fan information values.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwFanEntry  

swFanUnitIndex 1.3.6.1.4.1.171.12.11.1.7.1.1
Indicates the unit ID in the System.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swFanID 1.3.6.1.4.1.171.12.11.1.7.1.2
Indicates the unit ID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swFanStatus 1.3.6.1.4.1.171.12.11.1.7.1.3
Indicates the current fan status. speed-0 : If the fan function is normal and the fan does not spin due to the temperature not reaching the threshold, the status of the fan is speed 0. speed-low : Fan spin using the lowest speed. speed-middle: Fan spin using the middle speed. speed-high : Fan spin using the highest speed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(0), working(1), fail(2), speed-0(3), speed-low(4), speed-middle(5), speed-high(6)  

swFanPostion 1.3.6.1.4.1.171.12.11.1.7.1.4
Indicates the position of the fan.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), left(2), right(3), back(4), cpu(5)  

swFanNumber 1.3.6.1.4.1.171.12.11.1.7.1.5
Indicates the fan number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swFanSpeed 1.3.6.1.4.1.171.12.11.1.7.1.6
Indicates the fan work speed(RPM).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swTemperatureTable 1.3.6.1.4.1.171.12.11.1.8
A list of temperature values.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwTemperatureEntry

swTemperatureEntry 1.3.6.1.4.1.171.12.11.1.8.1
An entry of temperature values.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwTemperatureEntry  

swTemperatureUnitIndex 1.3.6.1.4.1.171.12.11.1.8.1.1
Indicates the unit ID in the System.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swTemperatureCurrent 1.3.6.1.4.1.171.12.11.1.8.1.2
The shelf current temperature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -500..500  

swTemperatureHighThresh 1.3.6.1.4.1.171.12.11.1.8.1.3
The high threshold of shelf temperature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -500..500  

swTemperatureLowThresh 1.3.6.1.4.1.171.12.11.1.8.1.4
The low threshold of shelf temperature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -500..500  

swUnitMgmt 1.3.6.1.4.1.171.12.11.1.9
OBJECT IDENTIFIER    

swUnitStackingVersion 1.3.6.1.4.1.171.12.11.1.9.1
This object indicates the version of this stacking system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swUnitMaxSupportedUnits 1.3.6.1.4.1.171.12.11.1.9.2
The maximum number of units that are supported in the system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swUnitNumOfUnit 1.3.6.1.4.1.171.12.11.1.9.3
The current number of units.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swUnitMgmtTable 1.3.6.1.4.1.171.12.11.1.9.4
This table contains the unit information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwUnitMgmtEntry

swUnitMgmtEntry 1.3.6.1.4.1.171.12.11.1.9.4.1
A list of management information for each unit in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwUnitMgmtEntry  

swUnitMgmtId 1.3.6.1.4.1.171.12.11.1.9.4.1.1
This object indicates the specific entry in the stacking/chassis table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..13  

swUnitMgmtMacAddr 1.3.6.1.4.1.171.12.11.1.9.4.1.2
The MAC address of this unit.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

swUnitMgmtStartPort 1.3.6.1.4.1.171.12.11.1.9.4.1.3
This object indicates the starting port of this unit.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

swUnitMgmtPortRange 1.3.6.1.4.1.171.12.11.1.9.4.1.4
This object indicates the total ports of this unit.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swUnitMgmtFrontPanelLedStatus 1.3.6.1.4.1.171.12.11.1.9.4.1.5
This object is a set of system LED indicators. The first four octets are defined as a system LED. The first LED is a power LED. The second LED in the stacking module is a master LED but in the chassis is a status LED. The third LED is a console LED. The fourth LED is an RPS (Redundancy Power Supply) LED. The other octets are the logical port LED (following dot1dBasePort ordering). Every two bytes are presented to a port. The first byte is presented as the link/activity LED. The second byte is presented as the speed LED. system LED: 01 = fail/error/non existence. 02 = work normal. link/activity LED : The most significant bit is used for blinking/solid: 8 = The LED blinks. The second most significant bit is used for link status: 1 = link fail. 2 = link pass. speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. The four remaining bits are currently unused and must be set to 0. Note: For the DGS-3700, the first five octets are defined as the system LED. The first LED is the power LED. The second LED is the console LED. The third LED is the RPS (Redundancy Power Supply) LED. The fourth LED is the management port LED. The fifth LED is the fan LED. For the DGS-3200-10 and DGS-3200-16, the first three octets are defined as the system LED. The first LED is the power LED. The second LED is the console LED. The third LED is the RPS (Redundancy Power Supply) LED. For the DGS-3200-24, the first three octets are defined as the system LED, the definition of the first three octets is the same as the DGS-3200-10 and DGS-3200-16, the fourth LED is the SD card LED. The following description is for the SD card LED: 01 = SD card is not present. 02 = SD card is present. 03 = fails to read/write SD card. 04 = read/write SD card successfully.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

swUnitMgmtCtrlMode 1.3.6.1.4.1.171.12.11.1.9.4.1.6
This object indicates the stacking mode the user configured for the unit. This object can only be configured when the device is in standalone mode. other (1) - This object indicates the stacking mode that the user has configured for the unit. This object can only be configured when the device is in standalone mode. auto (2) - The system will auto-assign a stacking role to this unit to be: standalone(3), master(4), or slave(5). standalone (3) - The unit is forced to be in standalone mode. master (4) - The unit is forced to be in master mode. If this unit is selected to be a master, the unit can modify the configuration of the stacking system. slave (5) - The unit is forced to be in slave mode. If this unit is selected to be a slave, it can only view the configuration of the stacking system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), auto(2), stand-alone(3), master(4), slave(5)  

swUnitMgmtCurrentMode 1.3.6.1.4.1.171.12.11.1.9.4.1.7
The current stacking role of this unit.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), auto(2), stand-alone(3), master(4), slave(5), backup-master(6)  

swUnitMgmtVersion 1.3.6.1.4.1.171.12.11.1.9.4.1.8
This object indicates the version of this stacking unit.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

swUnitMgmtModuleName 1.3.6.1.4.1.171.12.11.1.9.4.1.9
A textual string containing the stacking unit module name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

swUnitMgmtPromVersion 1.3.6.1.4.1.171.12.11.1.9.4.1.10
A textual string containing the PROM version of the stacking unit.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

swUnitMgmtFirmwareVersion 1.3.6.1.4.1.171.12.11.1.9.4.1.11
A textual string containing the firmware version of the stacking unit.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

swUnitMgmtHardwareVersion 1.3.6.1.4.1.171.12.11.1.9.4.1.12
A textual string containing the hardware version of the stacking unit.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

swUnitMgmtPriority 1.3.6.1.4.1.171.12.11.1.9.4.1.13
The Priority of the stacking unit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..63  

swUnitMgmtUserSetState 1.3.6.1.4.1.171.12.11.1.9.4.1.14
This object indicates the user set state of this unit.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), auto(2), user(3)  

swUnitMgmtExistState 1.3.6.1.4.1.171.12.11.1.9.4.1.15
The state of existence of this unit.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER exist(1), no-exist(2)  

swUnitMgmtBoxId 1.3.6.1.4.1.171.12.11.1.9.4.1.16
The box ID of the stacking unit. When show, it shows the current box ID of this unit; When set, it sets the new box ID, and the new box ID will take effect after the next boot.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER box-1(1), box-2(2), box-3(3), box-4(4), box-5(5), box-6(6), box-7(7), box-8(8), box-9(9), box-10(10), box-11(11), box-12(12), auto(13)  

swUnitMgmtSerialNumber 1.3.6.1.4.1.171.12.11.1.9.4.1.17
A text string containing the serial number of the stacking unit.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

swUnitTopology 1.3.6.1.4.1.171.12.11.1.9.5
The stacking topology state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER stand-alone(1), duplex-chain(2), duplex-ring(3), star(4), unstable(5)  

swUnitStackMode 1.3.6.1.4.1.171.12.11.1.9.6
Indicates the stacking mode supported in the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swUnitStackForceMasterRole 1.3.6.1.4.1.171.12.11.1.9.7
Indicates the stack force master role mode supported in the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swUnitStackTrapState 1.3.6.1.4.1.171.12.11.1.9.8
Indicates the stacking trap state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swUnitStackLogState 1.3.6.1.4.1.171.12.11.1.9.9
Indicates the stacking log state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swExternalAlarmTable 1.3.6.1.4.1.171.12.11.1.10
A list of the status of each of the alarm channels by this agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwExternalAlarmEntry

swExternalAlarmEntry 1.3.6.1.4.1.171.12.11.1.10.1
An entry containing objects with the status of each alarm channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwExternalAlarmEntry  

swExternalAlarmChannel 1.3.6.1.4.1.171.12.11.1.10.1.1
The number of the alarm channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swExternalAlarmMessage 1.3.6.1.4.1.171.12.11.1.10.1.2
Used to configure the alarm message when an alarm occurs on this channel. If no alarm message is configured on this channel, a default alarm message will be generated.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

swExternalAlarmStatus 1.3.6.1.4.1.171.12.11.1.10.1.3
Shows the current status of each alarm channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER alarming(1), normal(2)  

swEquipmentPowerSaving 1.3.6.1.4.1.171.12.11.1.11
OBJECT IDENTIFIER    

swEquipPowerSavingLinkDetectState 1.3.6.1.4.1.171.12.11.1.11.1
Indicates the equipment reduced power consumption state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swEquipPowerSavingLenDetect 1.3.6.1.4.1.171.12.11.1.11.2
Indicates the equipment reduced power consumption state with a link partner.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swEquipPowerSavingHiberState 1.3.6.1.4.1.171.12.11.1.11.3
This object indicates the power saving state of system hibernation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swEquipPowerSavingPortLEDState 1.3.6.1.4.1.171.12.11.1.11.4
This object indicates the power saving state of port LED.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swEquipPowerSavingPortState 1.3.6.1.4.1.171.12.11.1.11.5
This object indicates the power saving state of port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swEquipPowerSavingScheduleCtrl 1.3.6.1.4.1.171.12.11.1.11.6
OBJECT IDENTIFIER    

swEquipPowerSavingHibernationTable 1.3.6.1.4.1.171.12.11.1.11.6.1
A list of the system hibernation configurations of the power saving.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwEquipPowerSavingHibernationEntry

swEquipPowerSavingHibernationEntry 1.3.6.1.4.1.171.12.11.1.11.6.1.1
An entry containing the system hibernation configurations of the power saving.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwEquipPowerSavingHibernationEntry  

swEquipPowerSavingHiberRowStatus 1.3.6.1.4.1.171.12.11.1.11.6.1.1.100
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swEquipPowerSavingPortLedTable 1.3.6.1.4.1.171.12.11.1.11.6.2
A list of the port LED configurations of the power saving.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwEquipPowerSavingPortLedEntry

swEquipPowerSavingPortLedEntry 1.3.6.1.4.1.171.12.11.1.11.6.2.1
An entry containing the port LED configurations of the power saving.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwEquipPowerSavingPortLedEntry  

swEquipPowerSavingPortLedRowStatus 1.3.6.1.4.1.171.12.11.1.11.6.2.1.100
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swEquipPowerSavingPortTable 1.3.6.1.4.1.171.12.11.1.11.6.3
A list of the port configurations of the power saving.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwEquipPowerSavingPortEntry

swEquipPowerSavingPortEntry 1.3.6.1.4.1.171.12.11.1.11.6.3.1
An entry containing the port configurations of the power saving.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwEquipPowerSavingPortEntry  

swEquipPowerSavingPortIndex 1.3.6.1.4.1.171.12.11.1.11.6.3.1.1
Indicates the module's port number.(1..Max port number in the module).
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

swEquipPowerSavingPortRowStatus 1.3.6.1.4.1.171.12.11.1.11.6.3.1.100
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swEquipEeeMgmt 1.3.6.1.4.1.171.12.11.1.11.20
OBJECT IDENTIFIER    

swEquipEeeState 1.3.6.1.4.1.171.12.11.1.11.20.1
This object indicates the EEE state of all ports. Note: If the port's bit has a value of '1', specifies the EEE (Energy Efficient Ethernet) state of this port is 'Enabled', otherwise, if the port's bit has a value of '0', specifies the EEE state of this port is 'Disabled'.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swEquipmentTemperatureCtrl 1.3.6.1.4.1.171.12.11.1.12
OBJECT IDENTIFIER    

swTemperatureTrapState 1.3.6.1.4.1.171.12.11.1.12.1
This object can enable or disable the warning temperature trap.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swTemperatureLogState 1.3.6.1.4.1.171.12.11.1.12.2
This object can enable or disable the warning temperature log.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swEquipmentLEDCtrl 1.3.6.1.4.1.171.12.11.1.13
OBJECT IDENTIFIER    

swEquipmentPortLEDState 1.3.6.1.4.1.171.12.11.1.13.1
This object indicates the LED admin state of all ports.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swExternalAlarmStackingTable 1.3.6.1.4.1.171.12.11.1.15
A list of the status of each of the alarm channels by this agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwExternalAlarmStackingEntry

swExternalAlarmStackingEntry 1.3.6.1.4.1.171.12.11.1.15.1
An entry containing objects with the status of each alarm channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwExternalAlarmStackingEntry  

swExternalAlarmStackingUnitIndex 1.3.6.1.4.1.171.12.11.1.15.1.1
Indicates the unit ID in the System..
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

swExternalAlarmStackingChannel 1.3.6.1.4.1.171.12.11.1.15.1.2
The number of the alarm channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

swExternalAlarmStackingMessage 1.3.6.1.4.1.171.12.11.1.15.1.3
Used to configure the alarm message when an alarm occurs on this channel. If no alarm message is configured on this channel, a default alarm message will be generated.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

swExternalAlarmStackingStatus 1.3.6.1.4.1.171.12.11.1.15.1.4
Shows the current status of each alarm channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER alarming(1), normal(2)  

swEquipmentNotifyMgmt 1.3.6.1.4.1.171.12.11.2.1
OBJECT IDENTIFIER    

swEquipmentNotification 1.3.6.1.4.1.171.12.11.2.2
OBJECT IDENTIFIER    

swEquipUnitNotification 1.3.6.1.4.1.171.12.11.2.2.1
OBJECT IDENTIFIER    

swEquipPowerNotification 1.3.6.1.4.1.171.12.11.2.2.2
OBJECT IDENTIFIER    

swEquipFanNotification 1.3.6.1.4.1.171.12.11.2.2.3
OBJECT IDENTIFIER    

swEquipTemperatureNotification 1.3.6.1.4.1.171.12.11.2.2.4
OBJECT IDENTIFIER    

swEquipExternalAlarmNotification 1.3.6.1.4.1.171.12.11.2.2.5
OBJECT IDENTIFIER    

swEquipUnitNotifyMgmt 1.3.6.1.4.1.171.12.11.2.1.1
OBJECT IDENTIFIER    

swEquipPowerNotifyMgmt 1.3.6.1.4.1.171.12.11.2.1.2
OBJECT IDENTIFIER    

swEquipFanNotifyMgmt 1.3.6.1.4.1.171.12.11.2.1.3
OBJECT IDENTIFIER    

swEquipTemperatureNotifyMgmt 1.3.6.1.4.1.171.12.11.2.1.4
OBJECT IDENTIFIER    

swUnitInsertSeverity 1.3.6.1.4.1.171.12.11.2.1.1.1
Indicates the swUnitInsert detection level.
Status: current Access: read-write
OBJECT-TYPE    
  AgentNotifyLevel  

swUnitRemoveSeverity 1.3.6.1.4.1.171.12.11.2.1.1.2
Indicates the swUnitRemove detection level.
Status: current Access: read-write
OBJECT-TYPE    
  AgentNotifyLevel  

swUnitFailureSeverity 1.3.6.1.4.1.171.12.11.2.1.1.3
Indicates the swUnitFailure detection level.
Status: current Access: read-write
OBJECT-TYPE    
  AgentNotifyLevel  

swPowerStatusChgSeverity 1.3.6.1.4.1.171.12.11.2.1.2.1
Indicates the swPowerStatusChg detection level.
Status: current Access: read-write
OBJECT-TYPE    
  AgentNotifyLevel  

swPowerFailureSeverity 1.3.6.1.4.1.171.12.11.2.1.2.2
Indicates the swPowerFailure detection level.
Status: current Access: read-write
OBJECT-TYPE    
  AgentNotifyLevel  

swPowerRecoverSeverity 1.3.6.1.4.1.171.12.11.2.1.2.3
Indicates the swPowerRecover detection level.
Status: current Access: read-write
OBJECT-TYPE    
  AgentNotifyLevel  

swFanFailureSeverity 1.3.6.1.4.1.171.12.11.2.1.3.1
Indicates the swFanFailure detection level.
Status: current Access: read-write
OBJECT-TYPE    
  AgentNotifyLevel  

swFanRecoverSeverity 1.3.6.1.4.1.171.12.11.2.1.3.2
Indicates the swFanRecover detection level.
Status: current Access: read-write
OBJECT-TYPE    
  AgentNotifyLevel  

swHighTemperatureSeverity 1.3.6.1.4.1.171.12.11.2.1.4.1
Indicates the swHighTemperature detection level.
Status: current Access: read-write
OBJECT-TYPE    
  AgentNotifyLevel  

swHighTemperatureRecoverSeverity 1.3.6.1.4.1.171.12.11.2.1.4.2
Indicates the swHighTemperatureRecover detection level.
Status: current Access: read-write
OBJECT-TYPE    
  AgentNotifyLevel  

swLowTemperatureSeverity 1.3.6.1.4.1.171.12.11.2.1.4.3
Indicates the swLowTemperature detection level.
Status: current Access: read-write
OBJECT-TYPE    
  AgentNotifyLevel  

swLowTemperatureRecoverSeverity 1.3.6.1.4.1.171.12.11.2.1.4.4
Indicates the swLowTemperatureRecover detection level.
Status: current Access: read-write
OBJECT-TYPE    
  AgentNotifyLevel  

swEquipUnitNotifyPrefix 1.3.6.1.4.1.171.12.11.2.2.1.0
OBJECT IDENTIFIER    

swUnitInsert 1.3.6.1.4.1.171.12.11.2.2.1.0.1
Unit Hot Insert notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

swUnitRemove 1.3.6.1.4.1.171.12.11.2.2.1.0.2
Unit Hot Remove notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

swUnitFailure 1.3.6.1.4.1.171.12.11.2.2.1.0.3
Unit Failure notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

swUnitTPChange 1.3.6.1.4.1.171.12.11.2.2.1.0.4
The stacking topology change notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

swUnitRoleChange 1.3.6.1.4.1.171.12.11.2.2.1.0.5
The stacking unit role change notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

swEquipPowerNotifyPerfix 1.3.6.1.4.1.171.12.11.2.2.2.0
OBJECT IDENTIFIER    

swPowerStatusChg 1.3.6.1.4.1.171.12.11.2.2.2.0.1
Power Status change notification. The notification is issued when the swPowerStatus changes in the following cases: lowVoltage -> overCurrent. lowVoltage -> working. lowVoltage -> disconnect. lowVoltage -> connect. overCurrent -> lowVoltage. overCurrent -> working. overCurrent -> disconnect. overCurrent -> connect. working -> lowVoltage. working -> overCurrent. working -> connect. working -> disconnect. fail -> connect. fail -> disconnect. connect -> lowVoltage. connect -> overCurrent. connect -> working. connect -> disconnect. disconnect -> lowVoltage. disconnect -> overCurrent. disconnect -> working. disconnect -> connect.
Status: current Access: read-write
NOTIFICATION-TYPE    

swPowerFailure 1.3.6.1.4.1.171.12.11.2.2.2.0.2
Power Failure notification. The notification is issued when the swPowerStatus changes in the following cases: lowVoltage -> fail. overCurrent -> fail. working -> fail. connect -> fail. disconnect -> fail.
Status: current Access: read-write
NOTIFICATION-TYPE    

swPowerRecover 1.3.6.1.4.1.171.12.11.2.2.2.0.3
Power Recover notification. The notification is issued when the swPowerStatus changes in the following cases: fail -> lowVoltage. fail -> overCurrent. fail -> working.
Status: current Access: read-write
NOTIFICATION-TYPE    

swEquipFanNotifyPrefix 1.3.6.1.4.1.171.12.11.2.2.3.0
OBJECT IDENTIFIER    

swFanFailure 1.3.6.1.4.1.171.12.11.2.2.3.0.1
Fan Failure notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

swFanRecover 1.3.6.1.4.1.171.12.11.2.2.3.0.2
Fan Recover notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

swEquipTemperatureNotifyPrefix 1.3.6.1.4.1.171.12.11.2.2.4.0
OBJECT IDENTIFIER    

swHighTemperature 1.3.6.1.4.1.171.12.11.2.2.4.0.1
High Temperature notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

swHighTemperatureRecover 1.3.6.1.4.1.171.12.11.2.2.4.0.2
High Temperature notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

swLowTemperature 1.3.6.1.4.1.171.12.11.2.2.4.0.3
Low Temperature notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

swLowTemperatureRecover 1.3.6.1.4.1.171.12.11.2.2.4.0.4
Low Temperature notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

swEquipExternalAlarmNotifyPrefix 1.3.6.1.4.1.171.12.11.2.2.5.0
OBJECT IDENTIFIER    

swExternalAlarm 1.3.6.1.4.1.171.12.11.2.2.5.0.1
The notice of an Alarm in the specified channel.
Status: current Access: read-write
NOTIFICATION-TYPE    

swExternalAlarmStacking 1.3.6.1.4.1.171.12.11.2.2.5.0.2
The notice of an Alarm in the specified channel.
Status: current Access: read-write
NOTIFICATION-TYPE    

swNotificationBindings 1.3.6.1.4.1.171.12.11.2.3
OBJECT IDENTIFIER    

swEquipTemperNotifyBindings 1.3.6.1.4.1.171.12.11.2.3.1
OBJECT IDENTIFIER    

swTemperSensorID 1.3.6.1.4.1.171.12.11.2.3.1.1
This object indicates the ID of the temperature sensor in the unit.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

swEquipUnitNotifyBindings 1.3.6.1.4.1.171.12.11.2.3.2
OBJECT IDENTIFIER    

swStackTopologyType 1.3.6.1.4.1.171.12.11.2.3.2.1
This object indicates the MAC address of the switch.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER chain(1), ring(2)  

swStackRoleChangeType 1.3.6.1.4.1.171.12.11.2.3.2.2
This object indicates the role information of the switch.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER backup-to-master(1), slave-to-master(2)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor