ERPS-MIB

File: ERPS-MIB.mib (23797 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	DLINK-ID-REC-MIB
Q-BRIDGE-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	RowStatus
MacAddress	NOTIFICATION-TYPE	dlink-common-mgmt
VlanIdOrNone

Defined Types

VidList
OCTET STRING	Size(0..127)

SwERPSMgmtRAPSVlanEntry
SEQUENCE
	swERPSMgmtRAPSVlanId	INTEGER
	swERPSMgmtRAPSWestPort	INTEGER
	swERPSMgmtRAPSWestPortState	INTEGER
	swERPSMgmtRAPSEastPort	INTEGER
	swERPSMgmtRAPSEastPortState	INTEGER
	swERPSMgmtRAPSRPLPort	INTEGER
	swERPSMgmtRAPSRPLOwnerAdminState	INTEGER
	swERPSMgmtRAPSProtectionVlan	VidList
	swERPSMgmtRAPSRingMEL	INTEGER
	swERPSMgmtRAPSHoldOffTime	INTEGER
	swERPSMgmtRAPSGuardTime	INTEGER
	swERPSMgmtRAPSWTRTime	INTEGER
	swERPSMgmtRAPSRingState	INTEGER
	swERPSMgmtRAPSRingAdminState	INTEGER
	swERPSMgmtRAPSRPLOwnerOperStatus	INTEGER
	swERPSMgmtRAPSProtectionVlanRangeList1to64	OCTET STRING
	swERPSMgmtRAPSProtectionVlanRangeList65to128	OCTET STRING
	swERPSMgmtRAPSProtectionVlanRangeList129to192	OCTET STRING
	swERPSMgmtRAPSProtectionVlanRangeList193to256	OCTET STRING
	swERPSMgmtRAPSProtectionVlanRangeList257to320	OCTET STRING
	swERPSMgmtRAPSProtectionVlanRangeList321to384	OCTET STRING
	swERPSMgmtRAPSProtectionVlanRangeList385to448	OCTET STRING
	swERPSMgmtRAPSProtectionVlanRangeList449to512	OCTET STRING
	swERPSMgmtRAPSRevertive	INTEGER
	swERPSMgmtRAPSOperWestPort	INTEGER
	swERPSMgmtRAPSOperEastPort	INTEGER
	swERPSMgmtRAPSOperRPLPort	INTEGER
	swERPSMgmtRAPSRPLOwnerOperState	INTEGER
	swERPSMgmtRAPSRowStatus	RowStatus

SwERPSMgmtSubRingCtrlEntry
SEQUENCE
	swERPSMgmtSubRingCtrlRAPSVlanId	INTEGER
	swERPSMgmtSubRingCtrlSubRingRAPSVlanId	INTEGER
	swERPSMgmtSubRingCtrlTCPropagationState	INTEGER
	swERPSMgmtSubRingCtrlRowStatus	RowStatus

Defined Values

swERPSMIB		1.3.6.1.4.1.171.12.78
The MIB module for managing Ethernet Ring Protection Switching.
MODULE-IDENTITY

swERPSCtrl		1.3.6.1.4.1.171.12.78.1
OBJECT IDENTIFIER

swERPSInfo		1.3.6.1.4.1.171.12.78.2
OBJECT IDENTIFIER

swERPSMgmt		1.3.6.1.4.1.171.12.78.3
OBJECT IDENTIFIER

swERPSNotify		1.3.6.1.4.1.171.12.78.4
OBJECT IDENTIFIER

swERPSAdminState		1.3.6.1.4.1.171.12.78.1.1
This object indicates the ERPS state of the bridge.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swERPSLogState		1.3.6.1.4.1.171.12.78.1.2
This object indicates the ERPS log state of the bridge.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swERPSTrapState		1.3.6.1.4.1.171.12.78.1.3
This object indicates the ERPS trap state of the bridge.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swERPSMgmtRAPSVlanTable		1.3.6.1.4.1.171.12.78.3.1
This table contains the ERPS ring configuration information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwERPSMgmtRAPSVlanEntry

swERPSMgmtRAPSVlanEntry		1.3.6.1.4.1.171.12.78.3.1.1
A list of the ERPS ring configuration information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwERPSMgmtRAPSVlanEntry

swERPSMgmtRAPSVlanId		1.3.6.1.4.1.171.12.78.3.1.1.1
The RAPS VLAN is an index of the configuration.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

swERPSMgmtRAPSWestPort		1.3.6.1.4.1.171.12.78.3.1.1.2
This is one of the RPL owner ports.The RPL owner may block this port. The value 0 indicates the west port is a virtual channel.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0 \| 1..65535

swERPSMgmtRAPSWestPortState		1.3.6.1.4.1.171.12.78.3.1.1.3
This is the west port state. The state may change occasionally. When the west port is configured on a virtual channel, the west port state is always forwarding.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	fowarding(1), blocking(2), signal-fail(3)

swERPSMgmtRAPSEastPort		1.3.6.1.4.1.171.12.78.3.1.1.4
This is the other RPL owner port.The RPL Owner may block this port. The value 0 indicates the west port is a virtual channel.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0 \| 1..65535

swERPSMgmtRAPSEastPortState		1.3.6.1.4.1.171.12.78.3.1.1.5
This is the east port state. The state may change occasionally. When the east port is configured on a virtual channel, the east port state is always forwarding.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	fowarding(1), blocking(2), signal-fail(3)

swERPSMgmtRAPSRPLPort		1.3.6.1.4.1.171.12.78.3.1.1.6
When the port enable state is enabled, the RPL port's current port role is defined by the ERPS application.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), west(2), east(3)

swERPSMgmtRAPSRPLOwnerAdminState		1.3.6.1.4.1.171.12.78.3.1.1.7
The administrative value of the RPL owner state. The RPL owner is an Ethernet Ring Node adjacent to the RPL that is responsible for blocking its end of the RPL under normal conditions.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swERPSMgmtRAPSProtectionVlan		1.3.6.1.4.1.171.12.78.3.1.1.8
The protection VLAN has prevented a loop.
Status: current	Access: read-write
OBJECT-TYPE
	VidList

swERPSMgmtRAPSRingMEL		1.3.6.1.4.1.171.12.78.3.1.1.9
The ring MEL is the maintenance entity group (MEG) level that provides a communication channel for the ring automatic protection switching (RAPS) information.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..7

swERPSMgmtRAPSHoldOffTime		1.3.6.1.4.1.171.12.78.3.1.1.10
In order to coordinate the timing of protection switches at multiple layers.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..10000

swERPSMgmtRAPSGuardTime		1.3.6.1.4.1.171.12.78.3.1.1.11
This is used to prevent ring nodes from receiving outdated RAPS messages.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	10..2000

swERPSMgmtRAPSWTRTime		1.3.6.1.4.1.171.12.78.3.1.1.12
When revertive is enabled, this is used to prevent frequent operation of the protection switch due to an intermittent defect. A failed working transport entity must become stable in a fault-free state.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..12

swERPSMgmtRAPSRingState		1.3.6.1.4.1.171.12.78.3.1.1.13
This indicates the state of the ring.The available states are: begin, init, idle, or protection.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	begin(1), init(2), idle(3), protection(4)

swERPSMgmtRAPSRingAdminState		1.3.6.1.4.1.171.12.78.3.1.1.14
This indicates the administrative state of the ring.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swERPSMgmtRAPSRPLOwnerOperStatus		1.3.6.1.4.1.171.12.78.3.1.1.15
The current operational value of the RPL owner state. The value 'active' is used to indicate that the RPL owner administrative state is enabled and the device is operating as the active RPL owner. The value 'inactive' is used to indicate that the RPL owner administrative state is enabled, but the device is operating as the inactive RPL owner. The value 'disabled' is used to indicate that the RPL owner administrative state of the device is disabled.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2), disabled(3)

swERPSMgmtRAPSProtectionVlanRangeList1to64		1.3.6.1.4.1.171.12.78.3.1.1.16
This object indicates the VLAN range (1-512) that belong to the protected VLANs.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(64)

swERPSMgmtRAPSProtectionVlanRangeList65to128		1.3.6.1.4.1.171.12.78.3.1.1.17
This object indicates the VLAN range (513-1024) that belong to the protected VLANs.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(64)

swERPSMgmtRAPSProtectionVlanRangeList129to192		1.3.6.1.4.1.171.12.78.3.1.1.18
This object indicates the VLAN range (1025-1536) that belong to the protected VLANs.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(64)

swERPSMgmtRAPSProtectionVlanRangeList193to256		1.3.6.1.4.1.171.12.78.3.1.1.19
This object indicates the VLAN range (1537-2048) that belong to the protected VLANs.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(64)

swERPSMgmtRAPSProtectionVlanRangeList257to320		1.3.6.1.4.1.171.12.78.3.1.1.20
This object indicates the VLAN range (2049-2560) that belong to the protected VLANs.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(64)

swERPSMgmtRAPSProtectionVlanRangeList321to384		1.3.6.1.4.1.171.12.78.3.1.1.21
This object indicates the VLAN range (2561-3072) that belongs to the protected VLANs.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(64)

swERPSMgmtRAPSProtectionVlanRangeList385to448		1.3.6.1.4.1.171.12.78.3.1.1.22
This object indicates the VLAN range (3073-3584) that belong to the protected VLANs.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(64)

swERPSMgmtRAPSProtectionVlanRangeList449to512		1.3.6.1.4.1.171.12.78.3.1.1.23
This object indicates the VLAN range (3585-4096) that belong to the protected VLANs.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(64)

swERPSMgmtRAPSRevertive		1.3.6.1.4.1.171.12.78.3.1.1.24
The object is used to enable or disable the revertive operation of a special ring. When revertive is disabled, the traffic link is allowed to use the RPL, after revovering from a failure. When revertive is enabled, the traffic link is restored to the working transport link.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swERPSMgmtRAPSOperWestPort		1.3.6.1.4.1.171.12.78.3.1.1.25
This object indicates actual running ring west port. The value 0 indicates the west port is a virtual channel.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0 \| 1..65535

swERPSMgmtRAPSOperEastPort		1.3.6.1.4.1.171.12.78.3.1.1.26
This object indicates actual running ring east port. The value 0 indicates the east port is a virtual channel.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0 \| 1..65535

swERPSMgmtRAPSOperRPLPort		1.3.6.1.4.1.171.12.78.3.1.1.27
This object indicates actual running ring RPL port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), west(2), east(3)

swERPSMgmtRAPSRPLOwnerOperState		1.3.6.1.4.1.171.12.78.3.1.1.28
This object indicates actual running RPL owner state.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swERPSMgmtRAPSRowStatus		1.3.6.1.4.1.171.12.78.3.1.1.100
This object indicates the RowStatus of this entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

swERPSMgmtSubRingCtrlTable		1.3.6.1.4.1.171.12.78.3.2
This table contains the ERPS sub-ring configuration information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwERPSMgmtSubRingCtrlEntry

swERPSMgmtSubRingCtrlEntry		1.3.6.1.4.1.171.12.78.3.2.1
A list of the ERPS sub-ring configuration information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwERPSMgmtSubRingCtrlEntry

swERPSMgmtSubRingCtrlRAPSVlanId		1.3.6.1.4.1.171.12.78.3.2.1.1
The RAPS VLAN is an index of the configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER

swERPSMgmtSubRingCtrlSubRingRAPSVlanId		1.3.6.1.4.1.171.12.78.3.2.1.2
This indicates the ring control VLAN-ID of the sub-ring which connects to another ring.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER

swERPSMgmtSubRingCtrlTCPropagationState		1.3.6.1.4.1.171.12.78.3.2.1.3
This indicates the state of the sub-ring topology change propagation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swERPSMgmtSubRingCtrlRowStatus		1.3.6.1.4.1.171.12.78.3.2.1.4
This object indicates the status of this entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

swERPSNotifyPrefix		1.3.6.1.4.1.171.12.78.4.0
OBJECT IDENTIFIER

swERPSSFDetectedTrap		1.3.6.1.4.1.171.12.78.4.0.1
When a signal failure occurs, a trap will be generated.
Status: current	Access: read-create
NOTIFICATION-TYPE

swERPSSFClearedTrap		1.3.6.1.4.1.171.12.78.4.0.2
When the signal failure clears, a trap will be generated.
Status: current	Access: read-create
NOTIFICATION-TYPE

swERPSRPLOwnerConflictTrap		1.3.6.1.4.1.171.12.78.4.0.3
When a conflict occurs, a trap will be generated.
Status: current	Access: read-create
NOTIFICATION-TYPE

swERPSNotificationBindings		1.3.6.1.4.1.171.12.78.4.2
OBJECT IDENTIFIER

swERPSNodeId		1.3.6.1.4.1.171.12.78.4.2.1
This used trap object means the node MAC.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	MacAddress