ESSENTIAL-COMMUNICATIONS-HIPPI-SWITCH

File: ESSENTIAL-COMMUNICATIONS-HIPPI-SWITCH.mib (19789 bytes)

Imported modules

RFC1213-MIB RFC1155-SMI RFC-1212
ESSENTIAL-COMMUNICATIONS-GLOBAL-REG

Imported symbols

DisplayString Gauge enterprises
OBJECT-TYPE ecExperimental

Defined Types

BackPlaneEntry  
SEQUENCE    
  backPlaneIndex Gauge
  backPlaneNumber Gauge
  backPlaneCard INTEGER
  mICPowerUpInitError Gauge
  mICHippiParityBurstError Gauge
  mICLinkReady Gauge
  mICSourceInterconnect Gauge
  mICSourceRequest Gauge
  mICSourceConnect Gauge
  mICSourceLastConnectAttempt Gauge
  mICDestinationInterconnect Gauge
  mICDestinationRequest Gauge
  mICDestinationConnect Gauge
  mICByteCounterOverflow Gauge
  mICNumberOfBytes Gauge
  mICNumberOfPackets Gauge
  mICConnectsSuccessful Gauge

SourceRouteEntry  
SEQUENCE    
  srcIndex Gauge
  srcRoute DisplayString 1..80

DestRouteEntry  
SEQUENCE    
  destIndex Gauge
  destRoute DisplayString 1..80

HuntGroupEntry  
SEQUENCE    
  hg Gauge
  hgOutPortList DisplayString 1..80

HuntGroupOrderEntry  
SEQUENCE    
  hgOrderIndex Gauge
  hgOrderList DisplayString 1..80

Defined Values

essentialCommunications 1.3.6.1.4.1.2159
OBJECT IDENTIFIER    

ecRoot 1.3.6.1.4.1.2159.1
OBJECT IDENTIFIER    

ecProducts 1.3.6.1.4.1.2159.1.3
OBJECT IDENTIFIER    

ecExperimental 1.3.6.1.4.1.2159.1.6
OBJECT IDENTIFIER    

hippiSwitchMIB 1.3.6.1.4.1.2159.1.6.1
OBJECT IDENTIFIER    

hippiSwitchMIBv103 1.3.6.1.4.1.2159.1.3.1
OBJECT IDENTIFIER    

switchObjs 1.3.6.1.4.1.2159.1.3.1.1
OBJECT IDENTIFIER    

switchDescription 1.3.6.1.4.1.2159.1.3.1.1.1
Returns the description, vendor, and version numbers of the switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

switchNumOfPorts 1.3.6.1.4.1.2159.1.3.1.1.2
The number of slots in this switch. (Max number of media access cards).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

sccDescription 1.3.6.1.4.1.2159.1.3.1.1.3
The model, vendor, and version number of the switch control card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sccDateTime 1.3.6.1.4.1.2159.1.3.1.1.4
The date/time in the real time clock. Format: yyyymmddhhmmss.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

sccAdminStatus 1.3.6.1.4.1.2159.1.3.1.1.5
The desired state of the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), reset(2)  

sccOperStatus 1.3.6.1.4.1.2159.1.3.1.1.6
The current state of the switch. SNMP operations can not occur when the switch is busy. SNMP operations can not occur when the switch is resetting.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), reseting(2), busy(3)  

backPlaneTable 1.3.6.1.4.1.2159.1.3.1.1.7
This table represent all of the slots in a HIPPI switch. None of the rows can be added to or deleted by the user.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BackPlaneEntry

backPlaneEntry 1.3.6.1.4.1.2159.1.3.1.1.7.1
A row in the table describing one slot in the switch backplane.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BackPlaneEntry  

backPlaneIndex 1.3.6.1.4.1.2159.1.3.1.1.7.1.1
The table index for this slot on the backplane.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Gauge  

backPlaneNumber 1.3.6.1.4.1.2159.1.3.1.1.7.1.2
The slot number as seen printed on the switch (backPlaneIndex + 1)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

backPlaneCard 1.3.6.1.4.1.2159.1.3.1.1.7.1.3
The type of MIC present in this slot of the backplane on the switch
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), unknown(1), parallel(2), serial(3)  

mICPowerUpInitError 1.3.6.1.4.1.2159.1.3.1.1.7.1.4
True if error detected by MIC on start-up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mICHippiParityBurstError 1.3.6.1.4.1.2159.1.3.1.1.7.1.5
Valid the SMIC only. Type of parity error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mICLinkReady 1.3.6.1.4.1.2159.1.3.1.1.7.1.6
Valid the SMIC only. True if link ready asserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mICSourceInterconnect 1.3.6.1.4.1.2159.1.3.1.1.7.1.7
Source interconnect is valid for the PMIC only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mICSourceRequest 1.3.6.1.4.1.2159.1.3.1.1.7.1.8
True if source request is asserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mICSourceConnect 1.3.6.1.4.1.2159.1.3.1.1.7.1.9
True if source connect is asserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mICSourceLastConnectAttempt 1.3.6.1.4.1.2159.1.3.1.1.7.1.10
True if last source request was successful.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mICDestinationInterconnect 1.3.6.1.4.1.2159.1.3.1.1.7.1.11
True if destination interconnect is asserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mICDestinationRequest 1.3.6.1.4.1.2159.1.3.1.1.7.1.12
True if destination request is asserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mICDestinationConnect 1.3.6.1.4.1.2159.1.3.1.1.7.1.13
True if destination connect is asserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mICByteCounterOverflow 1.3.6.1.4.1.2159.1.3.1.1.7.1.14
The number of times the byte counter has over-flowed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mICNumberOfBytes 1.3.6.1.4.1.2159.1.3.1.1.7.1.15
The number of bytes that have passed through the MIC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mICNumberOfPackets 1.3.6.1.4.1.2159.1.3.1.1.7.1.16
The number of times packets has been asserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mICConnectsSuccessful 1.3.6.1.4.1.2159.1.3.1.1.7.1.17
The number of times this MIC has connected since reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

sourceRouteTable 1.3.6.1.4.1.2159.1.3.1.1.8
This table holds all of the source routes for this switch. FORMAT: OutputPort InputPortList Status. Output port is 0 to 15 Input port is 0 to 15 List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. Status is 0 (disabled) or 1 (enabled)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SourceRouteEntry

sourceRouteEntry 1.3.6.1.4.1.2159.1.3.1.1.8.1
One row in the source route table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SourceRouteEntry  

srcIndex 1.3.6.1.4.1.2159.1.3.1.1.8.1.1
The row number for this row of the table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

srcRoute 1.3.6.1.4.1.2159.1.3.1.1.8.1.2
One source route. FORMAT: OutputPort InputPortList Status. Output port is 0 to 15 Input port is 0 to 15 List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. Status is 0 (disabled) or 1 (enabled)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

srcWriteRow 1.3.6.1.4.1.2159.1.3.1.1.9
Setting this variable alters source routes. FORMAT: OutputPortList InputPortList Status. Output port is 0 to 15 Input port is 0 to 15 List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. Status is 0 (disabled) or 1 (enabled)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

destRouteTable 1.3.6.1.4.1.2159.1.3.1.1.10
This table holds all of destination routes (logical address routes) for this switch. FORMAT: LogicalAddress InputPortList Huntgroup. LogicalAddress is 0 to 4095. Input port is 0 to 15 Huntgroup is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DestRouteEntry

destRouteEntry 1.3.6.1.4.1.2159.1.3.1.1.10.1
A row in the destination route table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DestRouteEntry  

destIndex 1.3.6.1.4.1.2159.1.3.1.1.10.1.1
The index for this row of the table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

destRoute 1.3.6.1.4.1.2159.1.3.1.1.10.1.2
One Destination Route. FORMAT: LogicalAddress InputPortList Huntgroup. LogicalAddress is 0 to 4095. Input port is 0 to 15. Huntgroup is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

destWriteRow 1.3.6.1.4.1.2159.1.3.1.1.11
Setting this variable will alter the desitination routes. FORMAT: LogicalAddressList Huntgroup InputPortList. LogicalAddress is 0 to 4095. Huntgroup is 0 to 31. 31 will disable this route. Input port is 0 to 15. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

huntGroupTable 1.3.6.1.4.1.2159.1.3.1.1.12
This table holds all of the huntgroups for this switch. FORMAT: Huntgroup ( OutportList ) Huntgroup is 0 to 31. OutportList is an orderd list of output ports in Huntgroup.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HuntGroupEntry

huntGroupEntry 1.3.6.1.4.1.2159.1.3.1.1.12.1
A row in the huntgroup table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HuntGroupEntry  

hg 1.3.6.1.4.1.2159.1.3.1.1.12.1.1
The huntgroup number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

hgOutPortList 1.3.6.1.4.1.2159.1.3.1.1.12.1.2
The definition of one Huntgroup. FORMAT: Huntgroup ( OutportList ) Huntgroup is 0 to 31. OutportList is an orderd list of output ports in Huntgroup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

hgLWriteRow 1.3.6.1.4.1.2159.1.3.1.1.13
Setting this variable will alter the huntgroup table by setting every huntgroup in list to include outPortList. FORMAT: HuntgroupList OutportList Huntgroup is 0 to 31. Outport is 0 to 15 and 16. 16 will clear the huntgroup. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

huntGroupOrderTable 1.3.6.1.4.1.2159.1.3.1.1.14
This table holds all of the huntgroup order information for this switch. i.e. The order huntgroups are processed in when more than one huntgroup contends for the same output port. FORMAT: OutputPort HuntGroupList OutputPort is 0 to 15. Huntgroup is 0 to 31. List is an ordered list of huntgroups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HuntGroupOrderEntry

huntGroupOrderEntry 1.3.6.1.4.1.2159.1.3.1.1.14.1
One record on an output port's huntgroup priority.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HuntGroupOrderEntry  

hgOrderIndex 1.3.6.1.4.1.2159.1.3.1.1.14.1.1
The backplane slot number containing output port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

hgOrderList 1.3.6.1.4.1.2159.1.3.1.1.14.1.2
An ordered list of an output port's huntgroup priority. FORMAT: OutputPort HuntGroupList OutputPort is 0 to 15. Huntgroup is 0 to 31. List is an ordered list of huntgroups.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

hgOWriteRow 1.3.6.1.4.1.2159.1.3.1.1.15
Setting this variable will alter the huntgroup order table. FORMAT: OutputPort HuntGroupList Output port is 0 to 15. Huntgroup is 0 to 31. Huntgroup must contain output port in its output port list. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

hgSaveRestore 1.3.6.1.4.1.2159.1.3.1.1.16
Writting a 1 saves all hunt group information on the switch. Writting a 2 restores all hunt group information on the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER save(1), restore(2)  

routesSaveRestore 1.3.6.1.4.1.2159.1.3.1.1.17
Writting a 1 saves all source/destination routes on the switch. Writting a 2 restores all source/destination routes on the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER save(1), restore(2)