ETH-SWITCH-MIB

File: ETH-SWITCH-MIB.mib (85710 bytes)

Imported modules

RFC-1215 RFC1155-SMI RFC1213-MIB
SCANET-MIB RFC-1212

Imported symbols

TRAP-TYPE TimeTicks Counter
DisplayString scanet OBJECT-TYPE

Defined Types

ProductIds  
INTEGER notAvailable(1), es-1520(1163072800), es-1530(1163072816), es-1810(1163073552), es-1820(1163073568), es-1830(1163073584), es-1831(1163073585), es-1832(1163073586), es-1840(1163073600), es-1850(1163073616), es100fx(1163073617), es10t24(1163076624), es10t24plus(1163076640), es10mmt12(1163076656), es10mmfl(1163076657), es-0012(1163067410), es-0040(1163067456), es-0100(1163067648), es-0101(1163067649), es100mmfx(1163067650), es-0103(1163067651), es100mmtx(1163067664), es-0111(1163067665), es-0154(1163067732), es-0155(1163067733), lp-3001(1280323585), lp-3002(1280323586), lp-3003(1280323587), lp-3004(1280323588), lp-3005(1280323589), lp-3006(1280323590), lp-3014(1280323604), lp-3015(1280323605)    

PortEntry  
SEQUENCE    
  portNumber INTEGER
  portInterfaceIndex INTEGER
  portLED OCTET STRING
  portState OCTET STRING
  portCardNumber INTEGER
  portPimNumber INTEGER
  portPimPortNumber INTEGER

PortIfEntry  
SEQUENCE    
  portIfIndex INTEGER
  portIfDescr DisplayString
  portIfLocation DisplayString
  portIfSwitchMode INTEGER
  portIfDuplex INTEGER
  portIfThrottleBack INTEGER
  portIfType INTEGER
  portIfDuplexSupported INTEGER
  portIfSpeedSupported INTEGER
  portIfSpeedAndDuplex INTEGER

TxStatEntry  
SEQUENCE    
  txStatIndex INTEGER
  txUCPkts64Octets Counter
  txUCPkts65To127Octets Counter
  txUCPkts128To255Octets Counter
  txUCPkts256To511Octets Counter
  txUCPkts512To1023Octets Counter
  txUCPkts1024To1518Octets Counter
  txMCPkts64Octets Counter
  txMCPkts65To127Octets Counter
  txMCPkts128To255Octets Counter
  txMCPkts256To511Octets Counter
  txMCPkts512To1023Octets Counter
  txMCPkts1024To1518Octets Counter
  txBCPkts64Octets Counter
  txBCPkts65To127Octets Counter
  txBCPkts128To255Octets Counter
  txBCPkts256To511Octets Counter
  txBCPkts512To1023Octets Counter
  txBCPkts1024To1518Octets Counter
  txDeffereds Counter
  txOctetsHis Counter
  txOctetsLos Counter
  txExcessiveDefferalsErrors Counter
  txForwardedRxError Counter
  txNiaUnderRunDrops Counter
  txLinkDownEvents Counter
  txAllCounterPackets OCTET STRING
  txAllCounterOthers OCTET STRING

RxStatEntry  
SEQUENCE    
  rxStatIndex INTEGER
  rxUCPkts64OctetsLocals Counter
  rxUCPkts64OctetsForwardeds Counter
  rxUCPkts65To127OctetsLocals Counter
  rxUCPkts65To127OctetsForwardeds Counter
  rxUCPkts128To255OctetsLocals Counter
  rxUCPkts128To255OctetsForwardeds Counter
  rxUCPkts256To511OctetsLocals Counter
  rxUCPkts256To511OctetsForwardeds Counter
  rxUCPkts512To1023OctetsLocals Counter
  rxUCPkts512To1023OctetsForwardeds Counter
  rxUCPkts1024To1518OctetsLocals Counter
  rxUCPkts1024To1518OctetsForwardeds Counter
  rxShortErrors Counter
  rxRuntErrors Counter
  rxDataRateMMErrors Counter
  rxMCPkts64OctetsLocals Counter
  rxMCPkts64OctetsForwardeds Counter
  rxMCPkts65To127OctetsLocals Counter
  rxMCPkts65To127OctetsForwardeds Counter
  rxMCPkts128To255OctetsLocals Counter
  rxMCPkts128To255OctetsForwardeds Counter
  rxMCPkts256To511OctetsLocals Counter
  rxMCPkts256To511OctetsForwardeds Counter
  rxMCPkts512To1023OctetsLocals Counter
  rxMCPkts512To1023OctetsForwardeds Counter
  rxMCPkts1024To1518OctetsLocals Counter
  rxMCPkts1024To1518OctetsForwardeds Counter
  rxOctetsLocalHis Counter
  rxOctetsLocalLos Counter
  rxOctetsForwardedHis Counter
  rxOctetsForwardedLos Counter
  rxBCPkts64OctetsLocals Counter
  rxBCPkts64OctetsForwardeds Counter
  rxBCPkts65To127OctetsLocals Counter
  rxBCPkts65To127OctetsForwardeds Counter
  rxBCPkts128To255OctetsLocals Counter
  rxBCPkts128To255OctetsForwardeds Counter
  rxBCPkts256To511OctetsLocals Counter
  rxBCPkts256To511OctetsForwardeds Counter
  rxBCPkts512To1023OctetsLocals Counter
  rxBCPkts512To1023OctetsForwardeds Counter
  rxBCPkts1024To1518OctetsLocals Counter
  rxBCPkts1024To1518OctetsForwardeds Counter
  rxFilterMACUnexp2ndPortDrops Counter
  rxFilterIllegalMACDrops Counter
  rxFlowCtrlCollCounter Counter
  rxVeryLongErrors Counter
  rxLongErrors Counter
  rxPiaOutOfPoolsDrop Counter
  rxManchesterCodeViolationErrors Counter
  rxRxJabbers Counter
  rxNiaOverRunDrops Counter
  rxAllCounterPackets OCTET STRING
  rxAllCounterOthers OCTET STRING

CardEntry  
SEQUENCE    
  cardNumber INTEGER
  cardId ProductIds
  cardFirstPort INTEGER
  cardMaxPims INTEGER

PimEntry  
SEQUENCE    
  pimCardNumber INTEGER
  pimNumber INTEGER
  pimId ProductIds
  pimFirstPort INTEGER
  pimNumberOfPorts INTEGER

Defined Values

ethSwitch 1.3.6.1.4.1.208.39
OBJECT IDENTIFIER    

control 1.3.6.1.4.1.208.39.1
OBJECT IDENTIFIER    

module 1.3.6.1.4.1.208.39.2
OBJECT IDENTIFIER    

ports 1.3.6.1.4.1.208.39.3
OBJECT IDENTIFIER    

statistic 1.3.6.1.4.1.208.39.4
OBJECT IDENTIFIER    

adaptiveForwardMode 1.3.6.1.4.1.208.39.5
OBJECT IDENTIFIER    

chipSets 1.3.6.1.4.1.208.39.6
OBJECT IDENTIFIER    

cards 1.3.6.1.4.1.208.39.7
OBJECT IDENTIFIER    

scSegments 1.3.6.1.4.1.208.39.1.1
Object controlling the use of the System Center Backplane. Each bus is assigned a bit value in the object
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER segmentA(1), segmentB(2), segmentAandB(3), segmentC(4), segmentAandC(5), segmentBandC(6), segmentAandBandC(7), none(8)  

defaultSwitchMode 1.3.6.1.4.1.208.39.1.2
Default Switch mode. used by the object portSwitchMode when its value is default(1)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cutThrough(2), fragmentFree(3), storeAndForward(4), adaptive(5)  

defaultThrottleBackMode 1.3.6.1.4.1.208.39.1.3
Default ThrottleBack mode. used by the object portThrottleBack when its value is default(1)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

networkPort 1.3.6.1.4.1.208.39.1.4
For a Workgroup Switch (only one multi MAC address port), this object determines the network port. The value equals the value of portNumber in the portTable. Notice that this object is valid for Workgroup switches only (ES-2410 and ES-1810). Other types of Switches returns the value 0 and has read-only access.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

expansionModule 1.3.6.1.4.1.208.39.2.1
An ID that identifies the expansion module
Status: mandatory Access: read-only
OBJECT-TYPE    
  ProductIds  

portLastChange 1.3.6.1.4.1.208.39.3.1
The value of sysUpTime at the last time any interface has changed state
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

portTable 1.3.6.1.4.1.208.39.3.2
Port Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortEntry

portEntry 1.3.6.1.4.1.208.39.3.2.1
A Port entry containing object for a Switch port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortEntry  

portNumber 1.3.6.1.4.1.208.39.3.2.1.1
A number that uniquely identifies a port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portInterfaceIndex 1.3.6.1.4.1.208.39.3.2.1.2
The value of this object equals the ports interface index value, ex. portIfIndex. If the value of this object is zero, then the port is not active, i.e. does not appear in the portIfTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portLED 1.3.6.1.4.1.208.39.3.2.1.3
The value of this object represent the status (colour) of the LED(s) attached to this port. Lower 3 bits indicates off/colour (off(0), red(1), green(2), yellow(4)), Higher 5 bits reserved for flash frequency. For value 0-9 the resolution is 0.1 Hz and 10-31 the resolution is 1.0 Hz. Ex. 8 gives 0.8 Hz and 11 gives 2 Hz. For PIM slots with two LEDs that can contain either an expansion card, a one port PIM or a PIM with multiple ports a special case is needed. The two LEDs are mapped into a two LED octets. In case the PIM slot contain a PIM with multiple ports a third LED octet represent the first port on the PIM. In the case there is two LEDs on the front, the first LED octet is the front and the second the back.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

portState 1.3.6.1.4.1.208.39.3.2.1.4
This is a bit array which represent the state of the port. bit 0: Disabled due to configuration bit 1: Hardware error bit 2: No linkpulse bit 3: Disabled by manager bit 4: Disabled by access control bit 5: Disabled due to shared port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portCardNumber 1.3.6.1.4.1.208.39.3.2.1.5
The cardNumber in the switch system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portPimNumber 1.3.6.1.4.1.208.39.3.2.1.6
The pimNumber in the switch system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portPimPortNumber 1.3.6.1.4.1.208.39.3.2.1.7
The relative number of the port on the PIM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portIfTable 1.3.6.1.4.1.208.39.3.3
Switch Interface Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortIfEntry

portIfEntry 1.3.6.1.4.1.208.39.3.3.1
An entry containing object for a Switch interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortIfEntry  

portIfIndex 1.3.6.1.4.1.208.39.3.3.1.1
An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portIfDescr 1.3.6.1.4.1.208.39.3.3.1.2
User configurable description of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

portIfLocation 1.3.6.1.4.1.208.39.3.3.1.3
User configurable location of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

portIfSwitchMode 1.3.6.1.4.1.208.39.3.3.1.4
Port Switch mode. If set to default(1) value from defaultSwitchMode is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default(1), cutThrough(2), fragmentFree(3), storeAndForward(4), adaptive(5), notAvailable(99)  

portIfDuplex 1.3.6.1.4.1.208.39.3.3.1.5
Port Duplex mode. For ports in auto mode the mode may change automatically between autoDetect(1), autoDetectedHalf(3) and autoDetectedFull(5).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER autoDetect(1), half(2), full(3), autoDetectedHalf(4), autoDetectedFull(5), notAvailable(99)  

portIfThrottleBack 1.3.6.1.4.1.208.39.3.3.1.6
Port ThrottleBack mode. If set to default(1) value from defaultThrottleBackMode is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default(1), enable(2), disable(3), notAvailable(99)  

portIfType 1.3.6.1.4.1.208.39.3.3.1.7
The type of Physical interface at the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER absent(1), tenbase2(2), aui(3), tenbasetutp(4), tenbasetstp(5), tenbasefl(6), tenbaseflfullduplex(7), tenbasetxutp(14), tenbasetxstp(15), hundredbasetx(51), hundredbasefx(54), backplane(100), hsb(101), internal(102), layer3link(110)  

portIfDuplexSupported 1.3.6.1.4.1.208.39.3.3.1.8
The duplex mode supported for a port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER half(1), full(2), halfAndFull(3), auto(4), autoAndHalfAndFull(7), notAvailable(99)  

portIfSpeedSupported 1.3.6.1.4.1.208.39.3.3.1.9
The speed supported for a port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER speed10Mbit(1), speed100Mbit(2), speed10And100Mbit(3), speedAutoAnd10And100Mbit(4), speed155Mbit(5), notAvailable(99)  

portIfSpeedAndDuplex 1.3.6.1.4.1.208.39.3.3.1.10
This object is used to configure the speed and duplex mode for a port. Byte 1: negotiation manual(0) autoDisable(1) autoAlternative(2) Byte 2: speed auto(1) 10(2) 100(3) 155(4) Byte 3: alternativeSpeed unused(0) (read-only) Byte 4: duplexMode auto(1) half(2) full(3) Byte 5: alternativeDuplexMode unused(0) (read-only) half(2) full(3) Explanation of the different negotiation: Manual: The port does not support auto detect of speed and duplex which means that only fixed values are legal. AutoDisable: The port supports auto negotiation and if the connected port does not except the suggested values the port will be disabled. AutoAlternative: The port supports auto negotiation and if the connected port does not except the suggested values the port will be set to some alternative values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(5)  

txStatTable 1.3.6.1.4.1.208.39.4.1
MIA ASIC Transmit statistic Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TxStatEntry

txStatEntry 1.3.6.1.4.1.208.39.4.1.1
An entry containing object for MIA ASIC Transmit statistic.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TxStatEntry  

txStatIndex 1.3.6.1.4.1.208.39.4.1.1.1
An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

txUCPkts64Octets 1.3.6.1.4.1.208.39.4.1.1.2
64 byte unicast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txUCPkts65To127Octets 1.3.6.1.4.1.208.39.4.1.1.3
65 to 127 byte unicast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txUCPkts128To255Octets 1.3.6.1.4.1.208.39.4.1.1.4
128 to 255 byte unicast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txUCPkts256To511Octets 1.3.6.1.4.1.208.39.4.1.1.5
256 to 511 byte unicast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txUCPkts512To1023Octets 1.3.6.1.4.1.208.39.4.1.1.6
512 to 1023 byte unicast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txUCPkts1024To1518Octets 1.3.6.1.4.1.208.39.4.1.1.7
1024 to 1518 byte unicast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txMCPkts64Octets 1.3.6.1.4.1.208.39.4.1.1.8
64 byte multicast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txMCPkts65To127Octets 1.3.6.1.4.1.208.39.4.1.1.9
65 to 127 byte multicast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txMCPkts128To255Octets 1.3.6.1.4.1.208.39.4.1.1.10
128 to 255 byte multicast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txMCPkts256To511Octets 1.3.6.1.4.1.208.39.4.1.1.11
256 to 511 byte multicast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txMCPkts512To1023Octets 1.3.6.1.4.1.208.39.4.1.1.12
512 to 1023 byte multicast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txMCPkts1024To1518Octets 1.3.6.1.4.1.208.39.4.1.1.13
1024 to 1518 byte multicast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txBCPkts64Octets 1.3.6.1.4.1.208.39.4.1.1.14
64 byte broadcast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txBCPkts65To127Octets 1.3.6.1.4.1.208.39.4.1.1.15
65 to 127 byte broadcast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txBCPkts128To255Octets 1.3.6.1.4.1.208.39.4.1.1.16
128 to 255 byte broadcast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txBCPkts256To511Octets 1.3.6.1.4.1.208.39.4.1.1.17
256 to 511 byte broadcast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txBCPkts512To1023Octets 1.3.6.1.4.1.208.39.4.1.1.18
512 to 1023 byte broadcast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txBCPkts1024To1518Octets 1.3.6.1.4.1.208.39.4.1.1.19
1024 to 1518 byte broadcast packets transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txDeffereds 1.3.6.1.4.1.208.39.4.1.1.20
A transmission must await a silent net in Simplex mode. If the transmission is delayed due to a non silent net the transmission is deffered.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txOctetsHis 1.3.6.1.4.1.208.39.4.1.1.21
High part of a 64 bit octet transmitted counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txOctetsLos 1.3.6.1.4.1.208.39.4.1.1.22
Low part of a 64 bit octet transmitted counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txExcessiveDefferalsErrors 1.3.6.1.4.1.208.39.4.1.1.23
Maximum defferal should be the duration of a maximum length packet, if no errors on the net. Excessive defferal is indicated if defferal duration is more than approximately 2 maximum packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txForwardedRxError 1.3.6.1.4.1.208.39.4.1.1.24
The transmission are aborted on the transmitting port of the switch if the receiving port of the present packet receives are packet with error or receives a collision fragment. This should never occur in Store and forward mode, while collisions never should provoke this event in fragment free mode, except for at late collisions on the receiving net.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txNiaUnderRunDrops 1.3.6.1.4.1.208.39.4.1.1.25
The NIA TX buffer gets in underrun if the nimbus is overloaded. This should only happen if a configuration is made which loads the Nimbus with more than a load equal to 44 simplex 10Mbit net. NOTE: This only counts for NIA100 interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txLinkDownEvents 1.3.6.1.4.1.208.39.4.1.1.26
No link pulses are received. Usually this means that the cable are removed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

txAllCounterPackets 1.3.6.1.4.1.208.39.4.1.1.27
A collection of all counters for byte and packet counters. This object is needed to optimise SNMP traffic. The counters in this string are txStatIndex INTEGER txOctetsHis Counter txOctetsLos Counter txUCPkts64Octets Counter txUCPkts65To127Octets Counter txUCPkts128To255Octets Counter txUCPkts256To511Octets Counter txUCPkts512To1023Octets Counter txUCPkts1024To1518Octets Counter txMCPkts64Octets Counter txMCPkts65To127Octets Counter txMCPkts128To255Octets Counter txMCPkts256To511Octets Counter txMCPkts512To1023Octets Counter txMCPkts1024To1518Octets Counter txBCPkts64Octets Counter txBCPkts65To127Octets Counter txBCPkts128To255Octets Counter txBCPkts256To511Octets Counter txBCPkts512To1023Octets Counter txBCPkts1024To1518Octets Counter The values are represented in the OCTET STRING in the listed order, each value stored as a 32 bits big engine value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(127)  

txAllCounterOthers 1.3.6.1.4.1.208.39.4.1.1.28
A collection of all counters other than for byte and packet counters. This object is needed to optimise SNMP traffic. The counters in this string are txStatIndex INTEGER txDeffereds Counter txExcessiveDefferalsErrors Counter txForwardedRxError Counter txNiaUnderRunDrops Counter txLinkDownEvents Counter -- Counters from RFC1643 txCSenseErrors Counter txSQEErrors Counter txLateCollisions Counter txExcessiveCollisionErrors Counter txSingleCollisionFrames Counter txMultipleCollisionFrames Counter The values are represented in the OCTET STRING in the listed order, each value stored as a 32 bits big engine value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(127)  

rxStatTable 1.3.6.1.4.1.208.39.4.2
MIA ASIC Receive statistic Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RxStatEntry

rxStatEntry 1.3.6.1.4.1.208.39.4.2.1
An entry containing object for MIA ASIC Receive statistic.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RxStatEntry  

rxStatIndex 1.3.6.1.4.1.208.39.4.2.1.1
An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rxUCPkts64OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.2
64 byte unicast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxUCPkts64OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.3
64 byte unicast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxUCPkts65To127OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.4
65 to 127 byte unicast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxUCPkts65To127OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.5
65 to 127 byte unicast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxUCPkts128To255OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.6
128 to 255 byte unicast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxUCPkts128To255OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.7
128 to 255 byte unicast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxUCPkts256To511OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.8
256 to 511 byte unicast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxUCPkts256To511OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.9
255 to 511 byte unicast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxUCPkts512To1023OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.10
512 to 1023 byte unicast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxUCPkts512To1023OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.11
512 to 1023 byte unicast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxUCPkts1024To1518OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.12
1024 to 1518 byte unicast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxUCPkts1024To1518OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.13
1024 to 1518 byte unicast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxShortErrors 1.3.6.1.4.1.208.39.4.2.1.14
Receive fragments shorter than minimum ordinary collision fragment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxRuntErrors 1.3.6.1.4.1.208.39.4.2.1.15
Ordinary collision fragments received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxDataRateMMErrors 1.3.6.1.4.1.208.39.4.2.1.16
Data Rate Miss Match Error occurs if the data rate deviation is larger than allowed. This should only occur if problems with the TX oscillator in the adapter transmitting the frame.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxMCPkts64OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.17
64 byte multicast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxMCPkts64OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.18
64 byte multicast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxMCPkts65To127OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.19
65 to 127 byte multicast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxMCPkts65To127OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.20
65 to 127 byte multicast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxMCPkts128To255OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.21
128 to 255 byte multicast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxMCPkts128To255OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.22
128 to 255 byte multicast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxMCPkts256To511OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.23
256 to 511 byte multicast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxMCPkts256To511OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.24
256 to 511 byte multicast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxMCPkts512To1023OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.25
512 to 1023 byte multicast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxMCPkts512To1023OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.26
512 to 1023 byte multicast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxMCPkts1024To1518OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.27
1024 to 1518 byte multicast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxMCPkts1024To1518OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.28
1024 to 1518 byte multicast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxOctetsLocalHis 1.3.6.1.4.1.208.39.4.2.1.29
High part of a 64 bit octet received counter which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxOctetsLocalLos 1.3.6.1.4.1.208.39.4.2.1.30
Low part of a 64 bit octet received counter which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxOctetsForwardedHis 1.3.6.1.4.1.208.39.4.2.1.31
High part of a 64 bit octet received counter which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxOctetsForwardedLos 1.3.6.1.4.1.208.39.4.2.1.32
Low part of a 64 bit octet received counter which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxBCPkts64OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.33
64 byte broadcast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxBCPkts64OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.34
64 byte broadcast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxBCPkts65To127OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.35
65 to 127 byte broadcast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxBCPkts65To127OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.36
65 to 127 byte broadcast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxBCPkts128To255OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.37
128 to 255 byte broadcast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxBCPkts128To255OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.38
128 to 255 byte broadcast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxBCPkts256To511OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.39
256 to 511 byte broadcast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxBCPkts256To511OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.40
256 to 511 byte broadcast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxBCPkts512To1023OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.41
512 to 1023 byte broadcast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxBCPkts512To1023OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.42
512 to 1023 byte broadcast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxBCPkts1024To1518OctetsLocals 1.3.6.1.4.1.208.39.4.2.1.43
1024 to 1518 byte broadcast packets received which has not been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxBCPkts1024To1518OctetsForwardeds 1.3.6.1.4.1.208.39.4.2.1.44
1024 to 1518 byte broadcast packets received which has been forwarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxFilterMACUnexp2ndPortDrops 1.3.6.1.4.1.208.39.4.2.1.45
MAC address has been moved from one port to another
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxFilterIllegalMACDrops 1.3.6.1.4.1.208.39.4.2.1.46
Indicate more than one MAC address on a port which is not a network port or in general that the filter discards a packet due to an illegal source MAC address
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxFlowCtrlCollCounter 1.3.6.1.4.1.208.39.4.2.1.47
This counter counts the number of Flow Control collisions, which are generated due to flow control. Flow control are used when most of the pool memory are used to limit further amount of RX data until memory available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxVeryLongErrors 1.3.6.1.4.1.208.39.4.2.1.48
Occurs only if frame longer than 6000 bytes are received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxLongErrors 1.3.6.1.4.1.208.39.4.2.1.49
Occurs if a frame longer than 1518 bytes and shorter than 6000 bytes are received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxPiaOutOfPoolsDrop 1.3.6.1.4.1.208.39.4.2.1.50
Reception is aborted due to lack of Pool memory. The switch is overloaded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxManchesterCodeViolationErrors 1.3.6.1.4.1.208.39.4.2.1.51
An illegal symbol received on a 100Base-X port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxRxJabbers 1.3.6.1.4.1.208.39.4.2.1.52
Jabber is counted instead of a long error if the frame contains dribble bits or FCS error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxNiaOverRunDrops 1.3.6.1.4.1.208.39.4.2.1.53
The NIA RX buffer gets in overrun if the nimbus is overloaded. This should only happen if a configuration is made which loads the Nimbus with more than a load equal to 44 simplex 10Mbit net.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxAllCounterPackets 1.3.6.1.4.1.208.39.4.2.1.54
A collection of all counters for byte and packet counters. This object is needed to optimise SNMP traffic. The counters in this string are rxStatIndex INTEGER rxOctetsLocalHis Counter rxOctetsLocalLos Counter rxOctetsForwardedHis Counter rxOctetsForwardedLos Counter rxUCPkts64OctetsLocals Counter rxUCPkts64OctetsForwardeds Counter rxUCPkts65To127OctetsLocals Counter rxUCPkts65To127OctetsForwardeds Counter rxUCPkts128To255OctetsLocals Counter rxUCPkts128To255OctetsForwardeds Counter rxUCPkts256To511OctetsLocals Counter rxUCPkts256To511OctetsForwardeds Counter rxUCPkts512To1023OctetsLocals Counter rxUCPkts512To1023OctetsForwardeds Counter rxUCPkts1024To1518OctetsLocals Counter rxUCPkts1024To1518OctetsForwardeds Counter rxMCPkts64OctetsLocals Counter rxMCPkts64OctetsForwardeds Counter rxMCPkts65To127OctetsLocals Counter rxMCPkts65To127OctetsForwardeds Counter rxMCPkts128To255OctetsLocals Counter rxMCPkts128To255OctetsForwardeds Counter rxMCPkts256To511OctetsLocals Counter rxMCPkts256To511OctetsForwardeds Counter rxMCPkts512To1023OctetsLocals Counter rxMCPkts512To1023OctetsForwardeds Counter rxMCPkts1024To1518OctetsLocals Counter rxMCPkts1024To1518OctetsForwardeds Counter rxBCPkts64OctetsLocals Counter rxBCPkts64OctetsForwardeds Counter rxBCPkts65To127OctetsLocals Counter rxBCPkts65To127OctetsForwardeds Counter rxBCPkts128To255OctetsLocals Counter rxBCPkts128To255OctetsForwardeds Counter rxBCPkts256To511OctetsLocals Counter rxBCPkts256To511OctetsForwardeds Counter rxBCPkts512To1023OctetsLocals Counter rxBCPkts512To1023OctetsForwardeds Counter rxBCPkts1024To1518OctetsLocals Counter rxBCPkts1024To1518OctetsForwardeds Counter The values are represented in the OCTET STRING in the listed order, each value stored as a 32 bits big engine value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(164)  

rxAllCounterOthers 1.3.6.1.4.1.208.39.4.2.1.55
A collection of all counters other than for byte and packet counters. This object is needed to optimise SNMP traffic. The counters in this string are rxStatIndex INTEGER rxShortErrors Counter rxRuntErrors Counter rxDataRateMMErrors Counter rxFilterMACUnexp2ndPortDrops Counter rxFilterIllegalMACDrops Counter rxFlowCtrlCollCounter Counter rxVeryLongErrors Counter rxLongErrors Counter rxPiaOutOfPoolsDrop Counter rxManchesterCodeViolationErrors Counter rxRxJabbers Counter rxNiaOverRunDrops Counter -- Counters from RFC1643 rxAlignErrors Counter rxFCSErrors Counter The values are represented in the OCTET STRING in the listed order, each value stored as a 32 bits big engine value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(60)  

totalRxTxPackets 1.3.6.1.4.1.208.39.4.3
This object is used for LED control to display traffic. Values in the string are all packets transmitted and received at each port. The number and order of values equals the ifIndex. Each entry is 4 bytes. The first 4 bytes of the string is the value of portLastChange.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

totalCollisions 1.3.6.1.4.1.208.39.4.4
This object is used for LED control to display collision. Values in the string are the total collisions at each port. The number and order of values equals the ifIndex. Each entry is 4 bytes. The first 4 bytes of the string is the value of portLastChange.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

adaptiveForwardModeSampleTime 1.3.6.1.4.1.208.39.5.1
Specify how long (sec) the received packets will be monitored. The resulting forwarding mode will be based on the quality of the packets
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adaptiveForwardModeRuntsOffset 1.3.6.1.4.1.208.39.5.2
Specifies the minimum amount of runts during the sample time which forces the port out of cutThrough(2). The value is specified in per mille * 1000
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adaptiveForwardModeRuntsRange 1.3.6.1.4.1.208.39.5.3
Specifies together with adaptiveForwardModeRuntsOffset the maximum amount of runts allowed during the sample time, which forces the port back to cutThrough(2). The value is specified in per mille * 1000
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adaptiveForwardModeCrcsOffset 1.3.6.1.4.1.208.39.5.4
Specifies the maximum amount of crc errors during the sample time which forces the port out of Store and Forward. The value is specified in per mille * 1000
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adaptiveForwardModeCrcsRange 1.3.6.1.4.1.208.39.5.5
Specifies together with adaptiveForwardModeCrcsOffset the maximum amount of crc errors during the sample time which forces the port out of Store and Forward. The value is specified in per mille * 1000
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

chipSetNIA10 1.3.6.1.4.1.208.39.6.1
OBJECT IDENTIFIER    

chipSetNIA100 1.3.6.1.4.1.208.39.6.2
OBJECT IDENTIFIER    

cardTable 1.3.6.1.4.1.208.39.7.1
This table describes which cards a switch system consist of and how they are connected.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CardEntry

cardEntry 1.3.6.1.4.1.208.39.7.1.1
An entry contains either a card or an expansion card and how many PIMs it contains.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CardEntry  

cardNumber 1.3.6.1.4.1.208.39.7.1.1.1
The card index number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardId 1.3.6.1.4.1.208.39.7.1.1.2
The produce identification the card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ProductIds  

cardFirstPort 1.3.6.1.4.1.208.39.7.1.1.3
The portNumber of the first port on the card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardMaxPims 1.3.6.1.4.1.208.39.7.1.1.4
The maximum number of PIMs this card can contain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pimTable 1.3.6.1.4.1.208.39.7.2
This table describes the PIMs inserted in the switch system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PimEntry

pimEntry 1.3.6.1.4.1.208.39.7.2.1
An entry describes the PIM.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PimEntry  

pimCardNumber 1.3.6.1.4.1.208.39.7.2.1.1
The card number in the cardTable that this PIM is inserted in.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pimNumber 1.3.6.1.4.1.208.39.7.2.1.2
The number of the PIM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pimId 1.3.6.1.4.1.208.39.7.2.1.3
The product identification of the PIM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ProductIds  

pimFirstPort 1.3.6.1.4.1.208.39.7.2.1.4
The portNumber of the first port on the PIM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pimNumberOfPorts 1.3.6.1.4.1.208.39.7.2.1.5
The number of ports on the PIM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ethSwitchPermVioEvent 1
This trap is sent when there has been a permanent entry violation. A MAC address has been detected at an other port than the port where it has been configured as a permanent entry. The variable portIfIndex indicates the port where the MAC incorrectly has been detected. The problem can be solved by re-configuring the MAC's permanent entry, or by physical moving the MAC to the port it has been configured for.
TRAP-TYPE    

ethSwitchOnlyOneMACEvent 2
This trap is sent when a port detects more that one MAC address at a port intended for only one MAC. This Trap can only be sent from a Concentrator Switch where only one MAC is allowed, except from the network port. It can NOT be sent from a Backbone Switch since it allows multiple MAC's at all ports. The variable portIfIndex indicates the port where the MAC limit of one has bee exceeded. The problem can be solved by physical moving the MAC to a spare Concentrator Switch port.
TRAP-TYPE    

ethSwitchMACVioEvent 3
This trap is sent when there has been detected a MAC access control violation. A MAC address has been detected at a port with MAC access restriction, and the MAC was not allowed. The variable portIfIndex indicates the port with the MAC access violation.
TRAP-TYPE    

ethSwitchAdaptiveForwEvent 4
This trap is sent when a port automatically is changing forwarding mode. This will only happen when the port has been configured to Adaptive mode. The syntax is (Portnumber, New mode, Old mode) Mode numbers is: 2 = Cut-Through 3 = Fragment Free 4 = Store and Forward
TRAP-TYPE    

ethSwitchMACFilterVioEvent 5
Port/MAC filter MAC violation on port: %portIfIndex% This trap is sent when there has been detected a MAC address on a port (portIfIndex), where this MAC is not allowed access through the switch. Access restriction is due to entry in the Port/MAC filters of the switch.
TRAP-TYPE