EdgeSwitch-DHCPSERVER-PRIVATE-MIB

File: EdgeSwitch-DHCPSERVER-PRIVATE-MIB.mib (44577 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1213-MIB
EdgeSwitch-REF-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
IpAddress Integer32 Unsigned32
TimeTicks Counter32 TEXTUAL-CONVENTION
RowStatus RowPointer MacAddress
StorageType TruthValue DisplayString
PhysAddress fastPath

Defined Types

AgentDhcpServerPoolConfigEntry  
SEQUENCE    
  agentDhcpServerPoolIndex Unsigned32
  agentDhcpServerPoolName DisplayString
  agentDhcpServerPoolDefRouter DisplayString
  agentDhcpServerPoolDNSServer DisplayString
  agentDhcpServerPoolLeaseTime Integer32
  agentDhcpServerPoolType INTEGER
  agentDhcpServerPoolNetbiosNameServer DisplayString
  agentDhcpServerPoolNetbiosNodeType INTEGER
  agentDhcpServerPoolSNTPServer IpAddress
  agentDhcpServerPoolNextServer IpAddress
  agentDhcpServerPoolDomainName DisplayString
  agentDhcpServerPoolBootfile DisplayString
  agentDhcpServerPoolRowStatus RowStatus

AgentDhcpServerPoolAllocationEntry  
SEQUENCE    
  agentDhcpServerPoolAllocationName DisplayString
  agentDhcpServerDynamicPoolIpAddress IpAddress
  agentDhcpServerDynamicPoolIpMask IpAddress
  agentDhcpServerDynamicPoolIpPrefixLength Unsigned32
  agentDhcpServerPoolAllocationType INTEGER
  agentDhcpServerManualPoolClientIdentifier DisplayString
  agentDhcpServerManualPoolClientName DisplayString
  agentDhcpServerManualPoolClientHWAddr DisplayString
  agentDhcpServerManualPoolClientHWType INTEGER
  agentDhcpServerManualPoolIpAddress IpAddress
  agentDhcpServerManualPoolIpMask IpAddress
  agentDhcpServerManualPoolIpPrefixLength Unsigned32

AgentDhcpServerExcludedAddressRangeEntry  
SEQUENCE    
  agentDhcpServerExcludedRangeIndex Unsigned32
  agentDhcpServerExcludedStartIpAddress IpAddress
  agentDhcpServerExcludedEndIpAddress IpAddress
  agentDhcpServerExcludedAddressRangeStatus RowStatus

AgentDhcpServerPoolOptionEntry  
SEQUENCE    
  agentDhcpServerPoolOptionIndex Unsigned32
  agentDhcpServerPoolOptionCode Unsigned32
  agentDhcpServerOptionPoolName DisplayString
  agentDhcpServerPoolOptionAsciiData DisplayString
  agentDhcpServerPoolOptionHexData DisplayString
  agentDhcpServerPoolOptionIpAddressData DisplayString
  agentDhcpServerPoolOptionStatus RowStatus

AgentDhcpServerLeaseEntry  
SEQUENCE    
  agentDhcpServerLeaseIPAddress IpAddress
  agentDhcpServerLeaseIPMask IpAddress
  agentDhcpServerLeaseHWAddress MacAddress
  agentDhcpServerLeaseRemainingTime TimeTicks
  agentDhcpServerLeaseType INTEGER
  agentDhcpServerLeaseStatus RowStatus

AgentDhcpServerAddressConflictEntry  
SEQUENCE    
  agentDhcpServerAddressConflictIP IpAddress
  agentDhcpServerAddressConflictDetectionType INTEGER
  agentDhcpServerAddressConflictDetectionTime TimeTicks
  agentDhcpServerAddressConflictStatus RowStatus

Defined Values

fastPathDHCPServerPrivate 1.3.6.1.4.1.4413.1.1.12
The Ubiquiti Private MIB for EdgeSwitch DHCP Server
MODULE-IDENTITY    

agentDhcpServerGroup 1.3.6.1.4.1.4413.1.1.12.1
OBJECT IDENTIFIER    

agentDhcpServerAdminMode 1.3.6.1.4.1.4413.1.1.12.1.1
Admin-mode of the DHCP Server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentDhcpServerPingPktNos 1.3.6.1.4.1.4413.1.1.12.1.2
The no. of packets a DHCP Server sends to a pool address as part of a ping operation.Setting the value of ping-packets to zero turns off DHCP Server ping operation .
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 2..10  

agentDhcpServerAutomaticBindingsNos 1.3.6.1.4.1.4413.1.1.12.1.3
The no. of IP addresses that have been assigned automatically.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agentDhcpServerExpiredBindingsNos 1.3.6.1.4.1.4413.1.1.12.1.4
The no. of expired leases.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agentDhcpServerMalformedMessagesReceived 1.3.6.1.4.1.4413.1.1.12.1.5
The no. of malformed(truncated or corrupt) messages that have been received by the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agentDhcpServerDISCOVERMessagesReceived 1.3.6.1.4.1.4413.1.1.12.1.6
The no. of DHCP messages of type DHCPDISCOVER that have been received by the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agentDhcpServerREQUESTMessagesReceived 1.3.6.1.4.1.4413.1.1.12.1.7
The no. of DHCP messages of type DHCPREQUEST that have been received by the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agentDhcpServerDECLINEMessagesReceived 1.3.6.1.4.1.4413.1.1.12.1.8
The no. of DHCP messages of type DHCPDECLINE that have been received by the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agentDhcpServerRELEASEMessagesReceived 1.3.6.1.4.1.4413.1.1.12.1.9
The no. of DHCP messages of type DHCPRELEASE that have been received by the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agentDhcpServerINFORMMessagesReceived 1.3.6.1.4.1.4413.1.1.12.1.10
The no. of DHCP messages of type DHCPINFORM that have been received by the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agentDhcpServerOFFERMessagesSent 1.3.6.1.4.1.4413.1.1.12.1.11
The no. of DHCP messages of type DHCPOFFER that have been sent by the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agentDhcpServerACKMessagesSent 1.3.6.1.4.1.4413.1.1.12.1.12
The no. of DHCP messages of type DHCPACK that have been sent by the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agentDhcpServerNAKMessagesSent 1.3.6.1.4.1.4413.1.1.12.1.13
The no. of DHCP messages of type DHCPNAK that have been sent by the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agentDhcpServerClearStatistics 1.3.6.1.4.1.4413.1.1.12.1.14
Clears the DHCP server statistics.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentDhcpServerBootpAutomatic 1.3.6.1.4.1.4413.1.1.12.1.15
Used to enable or disable autmatic address allocation to bootp clients from dynamic address pools.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentDhcpServerDISCOVERMessagesDiscarded 1.3.6.1.4.1.4413.1.1.12.1.16
The number of DHCP DISCOVER messages dropped by the DHCP Server due to the DHCP pool exhaustion or if the maximum number of allocations are done.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agentDhcpServerPoolConfigGroup 1.3.6.1.4.1.4413.1.1.12.2
OBJECT IDENTIFIER    

agentDhcpServerPoolNameCreate 1.3.6.1.4.1.4413.1.1.12.2.1
A pool is created by applying write operation on this MIB object and providing a new pool-name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the pool name, the user should perform the traversal of agentDhcpServerPoolConfigTable. For this reason the get operation on object agentDhcpServerPoolNameCreate becomes insignificant.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0|1..31)  

agentDhcpServerPoolConfigTable 1.3.6.1.4.1.4413.1.1.12.2.2
A table of the DHCP Server Pool configuration entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentDhcpServerPoolConfigEntry

agentDhcpServerPoolConfigEntry 1.3.6.1.4.1.4413.1.1.12.2.2.1
Represents entry for a Dhcp server pool.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentDhcpServerPoolConfigEntry  

agentDhcpServerPoolIndex 1.3.6.1.4.1.4413.1.1.12.2.2.1.1
The Pool Index, which 'll be used as index for the PoolConfig Table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..512  

agentDhcpServerPoolName 1.3.6.1.4.1.4413.1.1.12.2.2.1.2
The name of the DHCP Address pool. This value cannot be modified
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

agentDhcpServerPoolDefRouter 1.3.6.1.4.1.4413.1.1.12.2.2.1.3
This specifies the default-router list(each default-router is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentDhcpServerPoolDNSServer 1.3.6.1.4.1.4413.1.1.12.2.2.1.4
This specifies the DNS IP servers(each DNS IP server is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentDhcpServerPoolLeaseTime 1.3.6.1.4.1.4413.1.1.12.2.2.1.5
This specifies the duration of the lease(in minutes) for an IP address that is assigened from a DHCP server to a DHCP client. For infinite leases, lease-time value will be set to 86400.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..86400  

agentDhcpServerPoolType 1.3.6.1.4.1.4413.1.1.12.2.2.1.6
This specifies the type of the binding that is associated with this pool.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER un-allocated(0), dynamic(1), manual(2)  

agentDhcpServerPoolNetbiosNameServer 1.3.6.1.4.1.4413.1.1.12.2.2.1.7
This specifies the IP address-list of Net BIOS name-servers that are available to DHCP clients (each IP address in this list is separated by comma and the list is terminated by semi-colon), an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current Net BIOS name-server list.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentDhcpServerPoolNetbiosNodeType 1.3.6.1.4.1.4413.1.1.12.2.2.1.8
This specifies the NetBIOS node-type for DHCP clients. 'none' is shown if node-type is not set to any of the four values.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), b-node(1), p-node(2), m-node(4), h-node(8)  

agentDhcpServerPoolSNTPServer 1.3.6.1.4.1.4413.1.1.12.2.2.1.9
This configures the SNTP server in the boot-process of a DHCP clients.User should enter zero(0.0.0.0) to remove the current SNTP server address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agentDhcpServerPoolNextServer 1.3.6.1.4.1.4413.1.1.12.2.2.1.10
This configures the next server in the boot-process of a DHCP clients.User should enter zero(0.0.0.0) to remove the current Next-server address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agentDhcpServerPoolDomainName 1.3.6.1.4.1.4413.1.1.12.2.2.1.11
This specifies the domain-name for a DHCP client. User should enter a 'null' or 'NULL' string to remove specified domain-name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..255)  

agentDhcpServerPoolBootfile 1.3.6.1.4.1.4413.1.1.12.2.2.1.12
This specifies the name of the default boot image for a DHCP client.User should enter a 'null' or 'NULL' string to remove specified bootfile name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..128)  

agentDhcpServerPoolRowStatus 1.3.6.1.4.1.4413.1.1.12.2.2.1.13
The row status variable is used according to installation and removal conventions for conceptual rows. When a pool is created by applying write operation on 'agentDhcpServerPoolCreateName',row-status becomes 'active'. If row-status for a poolEntry is set to 'destroy', the corresponding pool gets deleted.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

agentDhcpServerPoolAllocationTable 1.3.6.1.4.1.4413.1.1.12.2.3
A table of the DHCP Server's pool entries, showing the binding(dynamic/manual) specific parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentDhcpServerPoolAllocationEntry

agentDhcpServerPoolAllocationEntry 1.3.6.1.4.1.4413.1.1.12.2.3.1
Represents entry for a Dhcp server's allocation pool.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentDhcpServerPoolAllocationEntry  

agentDhcpServerPoolAllocationName 1.3.6.1.4.1.4413.1.1.12.2.3.1.1
This specifies name of the DHCP Address pool having dynamic binding. This value is same as agentDhcpServerPoolName of the agentDhcpServerPoolConfigTable.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..30)  

agentDhcpServerDynamicPoolIpAddress 1.3.6.1.4.1.4413.1.1.12.2.3.1.2
The IP address of the DHCP Address pool. The IP address must be set before setting the IP Mask or IP Prefix Length. After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agentDhcpServerDynamicPoolIpMask 1.3.6.1.4.1.4413.1.1.12.2.3.1.3
The bit-combination that renders which portion of the address of the DHCP address pool refers to the network or subnet and which part refers to the host.The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agentDhcpServerDynamicPoolIpPrefixLength 1.3.6.1.4.1.4413.1.1.12.2.3.1.4
This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'mnaual'.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

agentDhcpServerPoolAllocationType 1.3.6.1.4.1.4413.1.1.12.2.3.1.5
This specifies the type of the binding that is associated with this pool.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER un-allocated(0), dynamic(1), manual(2)  

agentDhcpServerManualPoolClientIdentifier 1.3.6.1.4.1.4413.1.1.12.2.3.1.6
It specifies the unique identifier (in colon separated hexadecimal format) of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. To set this object, input should be 7 octets long with the hardware type in the first octet.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentDhcpServerManualPoolClientName 1.3.6.1.4.1.4413.1.1.12.2.3.1.7
It specifies the name of a DHCP client. Client name should't include domain-name. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..30)  

agentDhcpServerManualPoolClientHWAddr 1.3.6.1.4.1.4413.1.1.12.2.3.1.8
It specifies the hardware-address of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. After hardware-address, hardware-type will be configured.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentDhcpServerManualPoolClientHWType 1.3.6.1.4.1.4413.1.1.12.2.3.1.9
It specifies the hardware-type of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. Before this, hardware-address must be configured.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ethernet(1), ieee802(6)  

agentDhcpServerManualPoolIpAddress 1.3.6.1.4.1.4413.1.1.12.2.3.1.10
The IP address of the DHCP Address pool for manual binding. The IP address must be set before setting the IP Mask or IP Prefix Length.After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agentDhcpServerManualPoolIpMask 1.3.6.1.4.1.4413.1.1.12.2.3.1.11
The bit-combination that renders which portion of the address of the DHCP address pool for a manual binding refers to the network or subnet and which part refers to the host. The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agentDhcpServerManualPoolIpPrefixLength 1.3.6.1.4.1.4413.1.1.12.2.3.1.12
This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'dynamic'.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

agentDhcpServerExcludedAddressRangeCreate 1.3.6.1.4.1.4413.1.1.12.2.4
It sets the IP address-ranges(from low to high) that a DHCP server should not assign to DHCP clients. Each time this MIB object is set successfully, one excluded range of IP address will be set. It is given in format - start and end IP address separated by '-' and terminated by ';'. One example would be - 192.168.36.1-200.1.1.1; . This sets one excluded range of IP address,which starts at 192.168.36.1 and ends at 200.1.1.1. If only start IP address is given, end IP address is assumed to be equal to the start IP address. Get operation on this MIB object returns a null-value, as for the purpose of viewing the exclude-address ranges, the user should perform the traversal of agentDhcpServerExcludedAddressRangeTable. For this reason the get operation on object agentDhcpServerExcludedAddressRangeCreate becomes insignificant.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentDhcpServerExcludedAddressRangeTable 1.3.6.1.4.1.4413.1.1.12.2.5
A table of the DHCP Server Pool configuration entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentDhcpServerExcludedAddressRangeEntry

agentDhcpServerExcludedAddressRangeEntry 1.3.6.1.4.1.4413.1.1.12.2.5.1
Represents entry for a Dhcp server excluded address range table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentDhcpServerExcludedAddressRangeEntry  

agentDhcpServerExcludedRangeIndex 1.3.6.1.4.1.4413.1.1.12.2.5.1.1
This specifies the index of the excluded IP address-range table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..256  

agentDhcpServerExcludedStartIpAddress 1.3.6.1.4.1.4413.1.1.12.2.5.1.2
This specifies the starting IP address of the excluded address-range.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agentDhcpServerExcludedEndIpAddress 1.3.6.1.4.1.4413.1.1.12.2.5.1.3
This specifies the ending IP address of the excluded address-range.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agentDhcpServerExcludedAddressRangeStatus 1.3.6.1.4.1.4413.1.1.12.2.5.1.4
This specifies the row-status of the excluded address-range. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-range is deleted.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

agentDhcpServerPoolOptionCreate 1.3.6.1.4.1.4413.1.1.12.2.6
This sets the option for an existing DHCP Server pool. Here, it is required to enter the pool-index, for which option is to be set and the value of the DHCP option code in string-format : pool-index and option code separated by '-' and terminated by ';', one example would be -> 1-19; , 1 is the pool-index and 19 is the option code.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentDhcpServerPoolOptionTable 1.3.6.1.4.1.4413.1.1.12.2.7
A table for configuring DHCP Server options.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentDhcpServerPoolOptionEntry

agentDhcpServerPoolOptionEntry 1.3.6.1.4.1.4413.1.1.12.2.7.1
Represents entry for a Dhcp server option table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentDhcpServerPoolOptionEntry  

agentDhcpServerPoolOptionIndex 1.3.6.1.4.1.4413.1.1.12.2.7.1.1
The Pool Index alongwith option-code, acts as index for the DHCP Server Option table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..512  

agentDhcpServerPoolOptionCode 1.3.6.1.4.1.4413.1.1.12.2.7.1.2
This specifies the DHCP option code. This alongwith pool-index acts as the index of the DHCP Server Option table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..254  

agentDhcpServerOptionPoolName 1.3.6.1.4.1.4413.1.1.12.2.7.1.3
The name of the DHCP Address pool. This value cannot be modified
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

agentDhcpServerPoolOptionAsciiData 1.3.6.1.4.1.4413.1.1.12.2.7.1.4
This specifies an NVT ASCII character string. ASCII character strings that contain white space must be delimited by quotation marks. If an ascii optiondata is entered again, it gets concatenated with the previous ascii data.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..441)  

agentDhcpServerPoolOptionHexData 1.3.6.1.4.1.4413.1.1.12.2.7.1.5
This specifies semi-colon separated hexadecimal data. Two hexadecimal digits in hexadecimal character string represents one byte . Hexadecimal strings can be entered in the following formats : 1) continuous hexadecimal digits like -- 0123456789abcdef 2) hexadecimal digits separated by space ' ' -- 01 23 45 67 de 0f 3) Two hexadecimal digits separated by delimeter ':' -- 01:02:a0 de:0f 78:5e 4) Four hexadecimal digits separated by delimeter '.' -- 01ab.c0de.7865 If a Hex optiondata is entered again, it gets concatenated with the previous Hex data.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..1324)  

agentDhcpServerPoolOptionIpAddressData 1.3.6.1.4.1.4413.1.1.12.2.7.1.6
This specifies the IP-address list(each IP-address is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between). If a IP option is entered again, it gets concatenated with the previous IP data. Maximum no. of IP addresses that can be entered at one time is 8.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentDhcpServerPoolOptionStatus 1.3.6.1.4.1.4413.1.1.12.2.7.1.7
This specifies the row-status of the DHCP Server Pool option.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

agentDhcpServerLeaseGroup 1.3.6.1.4.1.4413.1.1.12.3
OBJECT IDENTIFIER    

agentDhcpServerLeaseClearAllBindings 1.3.6.1.4.1.4413.1.1.12.3.1
Clears All the DHCP server bindings.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentDhcpServerLeaseTable 1.3.6.1.4.1.4413.1.1.12.3.2
A table of the DHCP Server's Lease entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentDhcpServerLeaseEntry

agentDhcpServerLeaseEntry 1.3.6.1.4.1.4413.1.1.12.3.2.1
Represents entry for a Dhcp server's leases.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentDhcpServerLeaseEntry  

agentDhcpServerLeaseIPAddress 1.3.6.1.4.1.4413.1.1.12.3.2.1.1
This specifies the IP address leased to the client.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agentDhcpServerLeaseIPMask 1.3.6.1.4.1.4413.1.1.12.3.2.1.2
This specifies the IP mask of the address leased to the client.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agentDhcpServerLeaseHWAddress 1.3.6.1.4.1.4413.1.1.12.3.2.1.3
This specifies the hardware address of the client.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

agentDhcpServerLeaseRemainingTime 1.3.6.1.4.1.4413.1.1.12.3.2.1.4
This specifies the period for which the lease is valid. It is displayed in days, hours, minutes, and seconds.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

agentDhcpServerLeaseType 1.3.6.1.4.1.4413.1.1.12.3.2.1.5
This specifies the type of address lease as Automatic or Manual.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER automatic(1), manual(2)  

agentDhcpServerLeaseStatus 1.3.6.1.4.1.4413.1.1.12.3.2.1.6
This specifies the row-status of the address-lease. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-lease is cleared.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

agentDhcpServerAddressConflictGroup 1.3.6.1.4.1.4413.1.1.12.4
OBJECT IDENTIFIER    

agentDhcpServerClearAllAddressConflicts 1.3.6.1.4.1.4413.1.1.12.4.1
Clears all the address-conflicts found by DHCP server,when set to enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentDhcpServerAddressConflictLogging 1.3.6.1.4.1.4413.1.1.12.4.2
It is used to enable, or disables the logging of address-conflicts on a DHCP Server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentDhcpServerAddressConflictTable 1.3.6.1.4.1.4413.1.1.12.4.3
A table of the conflicting-address entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentDhcpServerAddressConflictEntry

agentDhcpServerAddressConflictEntry 1.3.6.1.4.1.4413.1.1.12.4.3.1
Represents a conflicting-address entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentDhcpServerAddressConflictEntry  

agentDhcpServerAddressConflictIP 1.3.6.1.4.1.4413.1.1.12.4.3.1.1
This specifies the conflicting IP address assigned to the client by DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agentDhcpServerAddressConflictDetectionType 1.3.6.1.4.1.4413.1.1.12.4.3.1.2
This specifies the address-conflict detection-method.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ping(1), gratuitousArp(2)  

agentDhcpServerAddressConflictDetectionTime 1.3.6.1.4.1.4413.1.1.12.4.3.1.3
This specifies the sysUpTime at which the address-conflict was detected.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

agentDhcpServerAddressConflictStatus 1.3.6.1.4.1.4413.1.1.12.4.3.1.4
This specifies the row-status of the conflicting-address entry. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding conflicting-address entry is cleared.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus