F3-JDSU-MIB

Imported modules

SNMPv2-CONF	SNMPv2-SMI	SNMPv2-TC
ADVA-MIB	CM-COMMON-MIB	CM-ENTITY-MIB
CM-FACILITY-MIB

Imported symbols

MODULE-COMPLIANCE	OBJECT-GROUP	NOTIFICATION-GROUP
MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
Integer32	IpAddress	Unsigned32
Counter64	DateAndTime	DisplayString
TruthValue	RowStatus	StorageType
MacAddress	VariablePointer	TEXTUAL-CONVENTION
fsp150cm	VlanId	VlanPriority
AdminState	OperationalState	SecondaryState
neIndex	shelfIndex	slotIndex
cmEthernetTrafficPortIndex	cmEthernetTrafficPortEntry

Defined Types

GeneratorStatus
The exact generator status.
TEXTUAL-CONVENTION
	INTEGER	none(1), initial(2), helloIngress(3), helloCompleted(4), helloFailed(5), lookupIngress(6), lookupCompleted(7), lookupFailed(8), lookdownIngress(9), lookdownCompleted(10), lookdownFailed(11)

ItemOperation
Indicate the save action.
TEXTUAL-CONVENTION
	INTEGER	notApplicable(1), save(2)

UpdateReachStatus
Action on update reachable status.
TEXTUAL-CONVENTION
	INTEGER	notApplicable(1), update(2)

JdsuGeneratorFrameType
The frame type of JDSU generator. frameType8023 means 802.3
TEXTUAL-CONVENTION
	INTEGER	none(1), frameType8023(2)

JdsuGeneratorPayloadType
The frame type of JDSU generator.
TEXTUAL-CONVENTION
	INTEGER	none(1), fixed(2), random(3)

GeneratorAction
The lookup or lookdown action of JDSU generator.
TEXTUAL-CONVENTION
	INTEGER	notApplicable(1), loopUp(2), loopDown(3)

DiscoveryAction
The lookup or lookdown action of JDSU generator.
TEXTUAL-CONVENTION
	INTEGER	notApplicable(1), discover(2)

F3JdsuGeneratorDiscoverEntry
SEQUENCE
	f3JdsuGeneratorDiscoverDestMacAddr	MacAddress
	f3JdsuGeneratorDiscoverOuterVlanEnabled	TruthValue
	f3JdsuGeneratorDiscoverOuterVlanId	VlanId
	f3JdsuGeneratorDiscoverOuterVlanPri	VlanPriority
	f3JdsuGeneratorDiscoverOuterVlanEtherType	Integer32
	f3JdsuGeneratorDiscoverInnerVlan1Enabled	TruthValue
	f3JdsuGeneratorDiscoverInnerVlan1Id	VlanId
	f3JdsuGeneratorDiscoverInnerVlan1Pri	VlanPriority
	f3JdsuGeneratorDiscoverInnerVlan1EtherType	Integer32
	f3JdsuGeneratorDiscoverInnerVlan2Enabled	TruthValue
	f3JdsuGeneratorDiscoverInnerVlan2Id	VlanId
	f3JdsuGeneratorDiscoverInnerVlan2Pri	VlanPriority
	f3JdsuGeneratorDiscoverInnerVlan2EtherType	Integer32
	f3JdsuGeneratorDiscoverFrameType	JdsuGeneratorFrameType
	f3JdsuGeneratorDiscoverPayloadType	JdsuGeneratorPayloadType
	f3JdsuGeneratorDiscoverFrameLength	Integer32
	f3JdsuGeneratorDiscoverUnitTextId	DisplayString
	f3JdsuGeneratorDiscoverIfReachable	TruthValue
	f3JdsuGeneratorDiscoverGeneratorStatus	GeneratorStatus
	f3JdsuGeneratorDiscoverItemOperation	ItemOperation
	f3JdsuGeneratorDiscoverItemIfSaved	TruthValue
	f3JdsuGeneratorDiscoverGeneratorAction	GeneratorAction

F3JdsuGeneratorConfigureEntry
SEQUENCE
	f3JdsuGeneratorConfigureDestMacAddr	MacAddress
	f3JdsuGeneratorConfigureOuterVlanEnabled	TruthValue
	f3JdsuGeneratorConfigureOuterVlanId	VlanId
	f3JdsuGeneratorConfigureOuterVlanPri	VlanPriority
	f3JdsuGeneratorConfigureOuterVlanEtherType	Integer32
	f3JdsuGeneratorConfigureInnerVlan1Enabled	TruthValue
	f3JdsuGeneratorConfigureInnerVlan1Id	VlanId
	f3JdsuGeneratorConfigureInnerVlan1Pri	VlanPriority
	f3JdsuGeneratorConfigureInnerVlan1EtherType	Integer32
	f3JdsuGeneratorConfigureInnerVlan2Enabled	TruthValue
	f3JdsuGeneratorConfigureInnerVlan2Id	VlanId
	f3JdsuGeneratorConfigureInnerVlan2Pri	VlanPriority
	f3JdsuGeneratorConfigureInnerVlan2EtherType	Integer32
	f3JdsuGeneratorConfigureFrameType	JdsuGeneratorFrameType
	f3JdsuGeneratorConfigurePayloadType	JdsuGeneratorPayloadType
	f3JdsuGeneratorConfigureFrameLength	Integer32
	f3JdsuGeneratorConfigureUnitTextId	DisplayString
	f3JdsuGeneratorConfigureIfReachable	TruthValue
	f3JdsuGeneratorConfigureReachableUpdate	UpdateReachStatus
	f3JdsuGeneratorConfigureStatus	GeneratorStatus
	f3JdsuGeneratorConfigureGeneratorAction	GeneratorAction
	f3JdsuGeneratorConfigureStorageType	StorageType
	f3JdsuGeneratorConfigureRowStatus	RowStatus

F3EthernetTrafficPortJdsuExtEntry
SEQUENCE
	f3EthernetTrafficPortJdsuLoopbackEnabled	TruthValue
	f3EthernetTrafficPortJdsuGenerationEanbled	TruthValue
	f3EthernetTrafficPortJdsuLoopbackVlanList	DisplayString

Defined Values

f3JdsuMIB		1.3.6.1.4.1.2544.1.12.31
This module defines the JDSU MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
MODULE-IDENTITY

f3JdsuObjects		1.3.6.1.4.1.2544.1.12.31.1
OBJECT IDENTIFIER

f3JdsuNotifications		1.3.6.1.4.1.2544.1.12.31.2
OBJECT IDENTIFIER

f3JdsuConformance		1.3.6.1.4.1.2544.1.12.31.3
OBJECT IDENTIFIER

f3JdsuGeneratorPort		1.3.6.1.4.1.2544.1.12.31.1.1
This object describes the port which will raise a JDSU discovery.
Status: current	Access: read-write
OBJECT-TYPE
	VariablePointer

f3JdsuGeneratorOuterVlanEnabled		1.3.6.1.4.1.2544.1.12.31.1.2
This object describes whether the filter's Outer Vlan enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

f3JdsuGeneratorOuterVlanId		1.3.6.1.4.1.2544.1.12.31.1.3
This object describes the filter's Outer VlanId.
Status: current	Access: read-write
OBJECT-TYPE
	VlanId

f3JdsuGeneratorOuterVlanPri		1.3.6.1.4.1.2544.1.12.31.1.4
This object describes the filter's Outer Vlan Priority.
Status: current	Access: read-write
OBJECT-TYPE
	VlanPriority

f3JdsuGeneratorOuterVlanEtherType		1.3.6.1.4.1.2544.1.12.31.1.5
This object describes the filter's Outer Vlan Ether Type.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

f3JdsuGeneratorInnerVlan1Enabled		1.3.6.1.4.1.2544.1.12.31.1.6
This object describes whether the filter's Inner Vlan1 enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

f3JdsuGeneratorInnerVlan1Id		1.3.6.1.4.1.2544.1.12.31.1.7
This object describes the filter's Inner Vlan1 ID.
Status: current	Access: read-write
OBJECT-TYPE
	VlanId

f3JdsuGeneratorInnerVlan1Pri		1.3.6.1.4.1.2544.1.12.31.1.8
This object describes the filter's Inner Vlan1 Priority.
Status: current	Access: read-write
OBJECT-TYPE
	VlanPriority

f3JdsuGeneratorInnerVlan1EtherType		1.3.6.1.4.1.2544.1.12.31.1.9
This object describes the filter's Inner Vlan1 Ether Type.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

f3JdsuGeneratorInnerVlan2Enabled		1.3.6.1.4.1.2544.1.12.31.1.10
This object describes whether the filter's Inner Vlan2 enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

f3JdsuGeneratorInnerVlan2Id		1.3.6.1.4.1.2544.1.12.31.1.11
This object describes the filter's Inner Vlan2 ID.
Status: current	Access: read-write
OBJECT-TYPE
	VlanId

f3JdsuGeneratorInnerVlan2Pri		1.3.6.1.4.1.2544.1.12.31.1.12
This object describes the filter's Inner Vlan2 Priority.
Status: current	Access: read-write
OBJECT-TYPE
	VlanPriority

f3JdsuGeneratorInnerVlan2EtherType		1.3.6.1.4.1.2544.1.12.31.1.13
This object describes the filter's Inner Vlan2 Ether Type.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

f3JdsuGeneratorFrameType		1.3.6.1.4.1.2544.1.12.31.1.14
This object describe the filter's frame type. Its default value is 802.3.
Status: current	Access: read-write
OBJECT-TYPE
	JdsuGeneratorFrameType

f3JdsuGeneratorPayloadType		1.3.6.1.4.1.2544.1.12.31.1.15
Indicates the type of payload the remaining test frame shall contain, either fixed (incremental bytes or repeated bytes) or random (according to IEEE short continuous random test pattern). Default is random. This payload starts after the Ethernet frame header (including all VLAN tags).
Status: current	Access: read-write
OBJECT-TYPE
	JdsuGeneratorPayloadType

f3JdsuGeneratorFrameLength		1.3.6.1.4.1.2544.1.12.31.1.16
Indicates the length of the frame which shall be injected, The size range for all ports is from 64 to 9600.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

f3JdsuGeneratorDiscoveryAction		1.3.6.1.4.1.2544.1.12.31.1.17
Indicates the discovery action on the JDSU generator.
Status: current	Access: read-write
OBJECT-TYPE
	DiscoveryAction

f3JdsuGeneratorDiscoverTable		1.3.6.1.4.1.2544.1.12.31.1.18
A list of entries corresponding to JDSU Generator Discover Information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F3JdsuGeneratorDiscoverEntry

f3JdsuGeneratorDiscoverEntry		1.3.6.1.4.1.2544.1.12.31.1.18.1
A conceptual row in the f3JdsuGeneratorDiscoverTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	F3JdsuGeneratorDiscoverEntry

f3JdsuGeneratorDiscoverDestMacAddr		1.3.6.1.4.1.2544.1.12.31.1.18.1.1
This object describes the destination MAC address for the test frames.
Status: current	Access: not-accessible
OBJECT-TYPE
	MacAddress

f3JdsuGeneratorDiscoverOuterVlanEnabled		1.3.6.1.4.1.2544.1.12.31.1.18.1.2
This object describes whether the filter's Outer Vlan enabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f3JdsuGeneratorDiscoverOuterVlanId		1.3.6.1.4.1.2544.1.12.31.1.18.1.3
This object describes the filter's Outer Vlan ID.
Status: current	Access: read-only
OBJECT-TYPE
	VlanId

f3JdsuGeneratorDiscoverOuterVlanPri		1.3.6.1.4.1.2544.1.12.31.1.18.1.4
This object describes the filter's Outer Vlan Priority.
Status: current	Access: read-only
OBJECT-TYPE
	VlanPriority

f3JdsuGeneratorDiscoverOuterVlanEtherType		1.3.6.1.4.1.2544.1.12.31.1.18.1.5
This object describe the filter's Outer Vlan Ether Type.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

f3JdsuGeneratorDiscoverInnerVlan1Enabled		1.3.6.1.4.1.2544.1.12.31.1.18.1.6
This object describes whether the filter's Inner Vlan1 enabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f3JdsuGeneratorDiscoverInnerVlan1Id		1.3.6.1.4.1.2544.1.12.31.1.18.1.7
This object describe the filter's Inner Vlan1 ID.
Status: current	Access: read-only
OBJECT-TYPE
	VlanId

f3JdsuGeneratorDiscoverInnerVlan1Pri		1.3.6.1.4.1.2544.1.12.31.1.18.1.8
This object describes the filter's Inner Vlan1 Priority.
Status: current	Access: read-only
OBJECT-TYPE
	VlanPriority

f3JdsuGeneratorDiscoverInnerVlan1EtherType		1.3.6.1.4.1.2544.1.12.31.1.18.1.9
This object describes the filter's Inner Vlan1 Ether Type.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

f3JdsuGeneratorDiscoverInnerVlan2Enabled		1.3.6.1.4.1.2544.1.12.31.1.18.1.10
This object describes whether the filter's Inner Vlan2 enabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f3JdsuGeneratorDiscoverInnerVlan2Id		1.3.6.1.4.1.2544.1.12.31.1.18.1.11
This object describes the filter's Inner Vlan2 ID.
Status: current	Access: read-only
OBJECT-TYPE
	VlanId

f3JdsuGeneratorDiscoverInnerVlan2Pri		1.3.6.1.4.1.2544.1.12.31.1.18.1.12
This object describes the filter's Inner Vlan2 Priority.
Status: current	Access: read-only
OBJECT-TYPE
	VlanPriority

f3JdsuGeneratorDiscoverInnerVlan2EtherType		1.3.6.1.4.1.2544.1.12.31.1.18.1.13
This object describes the filter's Inner Vlan2 Ether Type.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

f3JdsuGeneratorDiscoverFrameType		1.3.6.1.4.1.2544.1.12.31.1.18.1.14
This object describes the filter's frame type. Its default value is 802.3.
Status: current	Access: read-only
OBJECT-TYPE
	JdsuGeneratorFrameType

f3JdsuGeneratorDiscoverPayloadType		1.3.6.1.4.1.2544.1.12.31.1.18.1.15
Indicates the type of payload the remaining test frame shall contain, either fixed (incremental bytes or repeated bytes) or random (according to IEEE short continuous random test pattern). Default is random. This payload starts after the Ethernet frame header (including all VLAN tags).
Status: current	Access: read-only
OBJECT-TYPE
	JdsuGeneratorPayloadType

f3JdsuGeneratorDiscoverFrameLength		1.3.6.1.4.1.2544.1.12.31.1.18.1.16
Indicates the length of the frame which shall be injected, The size range for all ports is from 64 to 9600.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

f3JdsuGeneratorDiscoverUnitTextId		1.3.6.1.4.1.2544.1.12.31.1.18.1.17
Indicates the string from remote device. Normally it is system name of remote device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

f3JdsuGeneratorDiscoverIfReachable		1.3.6.1.4.1.2544.1.12.31.1.18.1.18
Indicate whether the mac can be discovered or not exactly.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f3JdsuGeneratorDiscoverGeneratorStatus		1.3.6.1.4.1.2544.1.12.31.1.18.1.19
Indicates the generator status.
Status: current	Access: read-only
OBJECT-TYPE
	GeneratorStatus

f3JdsuGeneratorDiscoverItemOperation		1.3.6.1.4.1.2544.1.12.31.1.18.1.20
action save the discoverd items.
Status: current	Access: read-write
OBJECT-TYPE
	ItemOperation

f3JdsuGeneratorDiscoverItemIfSaved		1.3.6.1.4.1.2544.1.12.31.1.18.1.21
Indicates whether the discoverd item saved status.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f3JdsuGeneratorDiscoverGeneratorAction		1.3.6.1.4.1.2544.1.12.31.1.18.1.22
Indicates looup or lookdown action.
Status: current	Access: read-write
OBJECT-TYPE
	GeneratorAction

f3JdsuGeneratorConfigureTable		1.3.6.1.4.1.2544.1.12.31.1.19
A list of entries corresponding to JDSU Generator Configure Information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F3JdsuGeneratorConfigureEntry

f3JdsuGeneratorConfigureEntry		1.3.6.1.4.1.2544.1.12.31.1.19.1
A conceptual row in the f3JdsuGeneratorConfigureTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	F3JdsuGeneratorConfigureEntry

f3JdsuGeneratorConfigureDestMacAddr		1.3.6.1.4.1.2544.1.12.31.1.19.1.1
This object describes the destination MAC address for the test frames.
Status: current	Access: not-accessible
OBJECT-TYPE
	MacAddress

f3JdsuGeneratorConfigureOuterVlanEnabled		1.3.6.1.4.1.2544.1.12.31.1.19.1.2
This object describes whether the filter's Outer Vlan enabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f3JdsuGeneratorConfigureOuterVlanId		1.3.6.1.4.1.2544.1.12.31.1.19.1.3
This object describes the filter's Outer Vlan ID.
Status: current	Access: read-only
OBJECT-TYPE
	VlanId

f3JdsuGeneratorConfigureOuterVlanPri		1.3.6.1.4.1.2544.1.12.31.1.19.1.4
This object describes the filter's Outer Vlan Priority.
Status: current	Access: read-only
OBJECT-TYPE
	VlanPriority

f3JdsuGeneratorConfigureOuterVlanEtherType		1.3.6.1.4.1.2544.1.12.31.1.19.1.5
This object describes the filter's Outer Vlan Ether Type.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

f3JdsuGeneratorConfigureInnerVlan1Enabled		1.3.6.1.4.1.2544.1.12.31.1.19.1.6
This object describes whether the filter's Inner Vlan1 enabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f3JdsuGeneratorConfigureInnerVlan1Id		1.3.6.1.4.1.2544.1.12.31.1.19.1.7
This object describes the filter's Inner Vlan1 ID.
Status: current	Access: read-only
OBJECT-TYPE
	VlanId

f3JdsuGeneratorConfigureInnerVlan1Pri		1.3.6.1.4.1.2544.1.12.31.1.19.1.8
This object describes the filter's Inner Vlan1 Priority.
Status: current	Access: read-only
OBJECT-TYPE
	VlanPriority

f3JdsuGeneratorConfigureInnerVlan1EtherType		1.3.6.1.4.1.2544.1.12.31.1.19.1.9
This object describes the filter's Inner Vlan1 Ether Type.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

f3JdsuGeneratorConfigureInnerVlan2Enabled		1.3.6.1.4.1.2544.1.12.31.1.19.1.10
This object describes whether the filter's Inner Vlan2 enabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f3JdsuGeneratorConfigureInnerVlan2Id		1.3.6.1.4.1.2544.1.12.31.1.19.1.11
This object describes the filter's Inner Vlan2 ID.
Status: current	Access: read-only
OBJECT-TYPE
	VlanId

f3JdsuGeneratorConfigureInnerVlan2Pri		1.3.6.1.4.1.2544.1.12.31.1.19.1.12
This object describes the filter's Inner Vlan2 Priority.
Status: current	Access: read-only
OBJECT-TYPE
	VlanPriority

f3JdsuGeneratorConfigureInnerVlan2EtherType		1.3.6.1.4.1.2544.1.12.31.1.19.1.13
This object describes the filter's Inner Vlan2 Ether Type.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

f3JdsuGeneratorConfigureFrameType		1.3.6.1.4.1.2544.1.12.31.1.19.1.14
This object describes the filter's frame type. Its default value is 802.3.
Status: current	Access: read-only
OBJECT-TYPE
	JdsuGeneratorFrameType

f3JdsuGeneratorConfigurePayloadType		1.3.6.1.4.1.2544.1.12.31.1.19.1.15
Indicates the type of payload the remaining test frame shall contain, either fixed (incremental bytes or repeated bytes) or random (according to IEEE short continuous random test pattern). Default is random. This payload starts after the Ethernet frame header (including all VLAN tags).
Status: current	Access: read-only
OBJECT-TYPE
	JdsuGeneratorPayloadType

f3JdsuGeneratorConfigureFrameLength		1.3.6.1.4.1.2544.1.12.31.1.19.1.16
Indicates the length of the frame which shall be injected, The size range for all ports is from 64 to 9600.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

f3JdsuGeneratorConfigureUnitTextId		1.3.6.1.4.1.2544.1.12.31.1.19.1.17
Indicates the string from remote device. Normally it is system name of remote device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

f3JdsuGeneratorConfigureIfReachable		1.3.6.1.4.1.2544.1.12.31.1.19.1.18
Indicates whether the mac can be Configureed or not exactly.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f3JdsuGeneratorConfigureReachableUpdate		1.3.6.1.4.1.2544.1.12.31.1.19.1.19
Action on update the reachable status of the related item.
Status: current	Access: read-write
OBJECT-TYPE
	UpdateReachStatus

f3JdsuGeneratorConfigureStatus		1.3.6.1.4.1.2544.1.12.31.1.19.1.20
Indicates the generator status exactly.
Status: current	Access: read-only
OBJECT-TYPE
	GeneratorStatus

f3JdsuGeneratorConfigureGeneratorAction		1.3.6.1.4.1.2544.1.12.31.1.19.1.21
Indicates JDSU Generator lookup or lookdown action.
Status: current	Access: read-write
OBJECT-TYPE
	GeneratorAction

f3JdsuGeneratorConfigureStorageType		1.3.6.1.4.1.2544.1.12.31.1.19.1.22
The type of storage configured for this entry.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

f3JdsuGeneratorConfigureRowStatus		1.3.6.1.4.1.2544.1.12.31.1.19.1.23
The status of this row. Note: one row can be deleted by set this item as destoryed.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

f3EthernetTrafficPortJdsuExtTable		1.3.6.1.4.1.2544.1.12.31.1.20
A list of entries corresponding to Ethernet Traffic Port Facilities for JDSU configuration purposes.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F3EthernetTrafficPortJdsuExtEntry

f3EthernetTrafficPortJdsuExtEntry		1.3.6.1.4.1.2544.1.12.31.1.20.1
A conceptual row in the cmEthernetTrafficPortJdsuExtTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	F3EthernetTrafficPortJdsuExtEntry

f3EthernetTrafficPortJdsuLoopbackEnabled		1.3.6.1.4.1.2544.1.12.31.1.20.1.1
Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state. When JDSU Generation Enabled, this attribute can't be enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

f3EthernetTrafficPortJdsuGenerationEanbled		1.3.6.1.4.1.2544.1.12.31.1.20.1.2
This object describes whether the user would to raise a JDSU discovery action. When JDSU Loopback Enabled, this attribute cann't be enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

f3EthernetTrafficPortJdsuLoopbackVlanList		1.3.6.1.4.1.2544.1.12.31.1.20.1.3
In EG-X, up to 12 loopback can be supported and also up to 2 layer VLAN can be supported. The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2, OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-;2-, 3-, 4-;5-*').
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

f3JdsuCompliances		1.3.6.1.4.1.2544.1.12.31.3.1
OBJECT IDENTIFIER

f3JdsuGroups		1.3.6.1.4.1.2544.1.12.31.3.2
OBJECT IDENTIFIER

f3JdsuCompliance		1.3.6.1.4.1.2544.1.12.31.3.1.1
Describes the requirements for conformance to the f3 jdsu group.
Status: current	Access: read-only
MODULE-COMPLIANCE

f3JdsuGroup		1.3.6.1.4.1.2544.1.12.31.3.2.1
A collection of objects used to manage the JDSU functionality.
Status: current	Access: read-only
OBJECT-GROUP