F3-SYNC-MIB

Imported modules

SNMPv2-CONF	SNMPv2-SMI	SNMPv2-TC
CM-ENTITY-MIB	ADVA-MIB	CM-COMMON-MIB

Imported symbols

MODULE-COMPLIANCE	OBJECT-GROUP	MODULE-IDENTITY
OBJECT-TYPE	Integer32	Unsigned32
DisplayString	TruthValue	RowStatus
StorageType	VariablePointer	DateAndTime
TEXTUAL-CONVENTION	neIndex	shelfIndex
slotIndex	fsp150cm	AdminState
OperationalState	SecondaryState	F3DisplayString

Defined Types

NetworkClockType
Enumerations for Network Clock Type. option1 - represents an SDH regional clock type, option2 - represents a SONET regional clock type.
TEXTUAL-CONVENTION
	INTEGER	option1(1), option2(2)

ClockMode
Enumerations for Clock Mode. freerun - Free Run, holdover - Hold over, tracking - Tracking, lossoflock - Loss of Lock, locked - Locked, bypass - the frequency entity is not functioning and is being bypassed. One of its frequency inputs is externally selected to be used directly as the frequency output.
TEXTUAL-CONVENTION
	INTEGER	notAvailable(0), freerun(1), holdover(2), tracking(3), lossoflock(4), locked(5), bypass(6)

SSMQualityLevel
Enumerations for Sync Status Messages Quality Level
TEXTUAL-CONVENTION
	INTEGER	not-applicable(0), ql-dnu(1), ql-eec1(2), ql-eec2(3), ql-inv(4), ql-inv0(5), ql-inv1(6), ql-inv2(7), ql-inv3(8), ql-inv5(9), ql-inv7(10), ql-inv8(11), ql-inv9(12), ql-inv10(13), ql-inv11(14), ql-inv12(15), ql-none(16), ql-nsupp(17), ql-prc(18), ql-prov(19), ql-prs(20), ql-smc(21), ql-ssu-a(22), ql-ssu-b(23), ql-st2(24), ql-st3e(25), ql-stu(26), ql-tnc(27), ql-unc(28), ql-failed(29), ql-inv6(30), ql-inv13(31), ql-inv14(32), ql-dus(33), ql-na(34)

SyncRefStatus
Enumerations for Sync Reference status, ref-ok, ref-failed.
TEXTUAL-CONVENTION
	INTEGER	not-applicable(0), ref-ok(1), ref-failed(2), ref-freq-ok(3)

SyncRefState
Enumerations for Sync Reference state, active, standby, unavailable.
TEXTUAL-CONVENTION
	INTEGER	not-applicable(0), active(1), standby(2), unavailable(3), lockedout(4)

SyncDomainType
Enumerations for Sync Domain type, chassis, linecard.
TEXTUAL-CONVENTION
	INTEGER	chassis(1), linecard(2)

SyncOperationType
Enumerations for Sync Operation Type, none - No action, forcedswitch - can be used to override the currently selected reference, assuming the the chosen reference is not locked out. A forced switch overrides a manual switch and subsequent forced switch preempts a previous forced switch. A forced switch request to a reference which is in SF state or has a QL of DL-DNU when QL mode=Enabled will result in the clock selector entering holdover. manualswitch - can be used to switch to a reference, overriding the currently selected reference assuming a forced switch is not active on a reference other than chosen reference; it is not locked out, not in SF state, has a QL not QL-DNU and has the highest available QL. A manual switch request can only be used to override the assigned reference priorities. A manual switch request overrides a previous manual switch. lockout - sets the state of reference to locked-out, it is no longer considered available by the selection process, clearwtr - causes any active Wait to Restore timer for the reference, clearlockout - causes the reference to be considered available again by the selection process, clearswitch.
TEXTUAL-CONVENTION
	INTEGER	none(1), forcedswitch(2), manualswitch(3), lockout(4), clearwtr(5), clearlockout(6), clearswitch(7)

SyncSelectionMode
Enumerations for Sync Selection Mode, ql-mode, priority-mode.
TEXTUAL-CONVENTION
	INTEGER	ql-mode(1), priority-mode(2)

SquelchControl
Describes the Squelch Control of the PTP ports.
TEXTUAL-CONVENTION
	INTEGER	never(1), holdover(2), lock(3), squelch-ql(4)

TimeClockMode
Enumerations for Time Clock Mode. freerun - Free Run, warmup - Warm Up, tracking - Tracking, transition - Transition, holdover - Holdover, locked - Locked.
TEXTUAL-CONVENTION
	INTEGER	freerun(1), warmup(2), tracking(3), transition(4), holdover(5), locked(6)

TimeTraceAbilityStatus
Describes the time trace ability status.
TEXTUAL-CONVENTION
	INTEGER	notTraceAble(1), timeLocked(2), timeFreqLock(3), timeHoldover(4)

HoldoverAccuracy
Tok_String
TEXTUAL-CONVENTION
	INTEGER	time-500ns(1), time-1000ns(2), time-1500ns(3), time-5000ns(4), time-10000ns(5)

TimeHoldoverPerformance
Tok_String
TEXTUAL-CONVENTION
	INTEGER	time-500ns(1), time-1000ns(2), time-1500ns(3), time-5000ns(4), time-10000ns(5), time-0ns(6), time-100ns(7)

TimeSource
Enumerations for Time Source, atomic, gps, ptp, internal, other.
TEXTUAL-CONVENTION
	INTEGER	atomic(1), gps(2), ptp(3), internal(4), other(5)

F3SyncEntry
SEQUENCE
	f3SyncIndex	Integer32
	f3SyncAdminState	AdminState
	f3SyncOperationalState	OperationalState
	f3SyncSecondaryState	SecondaryState
	f3SyncNetworkClockType	NetworkClockType
	f3SyncSelectedReference	VariablePointer
	f3SyncClockMode	ClockMode
	f3SyncQL	SSMQualityLevel
	f3SyncAlias	DisplayString
	f3SyncDomain	SyncDomainType
	f3SyncSelectionMode	SyncSelectionMode
	f3SyncWaitToRestoreTime	Integer32
	f3SyncOperationSyncRef	VariablePointer
	f3SyncOperationType	SyncOperationType

F3SyncRefEntry
SEQUENCE
	f3SyncRefIndex	Integer32
	f3SyncRefReference	VariablePointer
	f3SyncRefPriority	Integer32
	f3SyncRefStatus	SyncRefStatus
	f3SyncRefState	SyncRefState
	f3SyncRefReceivedQL	SSMQualityLevel
	f3SyncRefStorageType	StorageType
	f3SyncRefRowStatus	RowStatus
	f3SyncRefAlias	DisplayString
	f3SyncRefEffectiveQL	SSMQualityLevel
	f3SyncRefOperationType	SyncOperationType

F3TimeClockEntry
SEQUENCE
	f3TimeClockIndex	Integer32
	f3TimeClockAlias	F3DisplayString
	f3TimeClockAdminState	AdminState
	f3TimeClockOperationalState	OperationalState
	f3TimeClockSecondaryState	SecondaryState
	f3TimeClockSelectedReference	VariablePointer
	f3TimeClockClockMode	TimeClockMode
	f3TimeClockClockClass	Unsigned32
	f3TimeClockSelectionMode	SyncSelectionMode
	f3TimeClockWaitToRestoreTime	Integer32
	f3TimeClockOperationTimeClockRef	VariablePointer
	f3TimeClockOperationType	SyncOperationType
	f3TimeClockLeap59	TruthValue
	f3TimeClockLeap61	TruthValue
	f3TimeClockTimeTraceAbilityStatus	TimeTraceAbilityStatus
	f3TimeClockExpectedQL	SSMQualityLevel
	f3TimeClockCurrentQL	SSMQualityLevel
	f3TimeClockSyncRefCandidate	TruthValue
	f3TimeClockTimeHoldoverPerformance	TimeHoldoverPerformance
	f3TimeClockUtcOffset	Unsigned32
	f3TimeClockCurrentTimeOfDay	DateAndTime
	f3TimeClockFrequencyReference	VariablePointer
	f3TimeClockFrequencyClockMode	ClockMode

F3TimeClockRefEntry
SEQUENCE
	f3TimeClockRefIndex	Integer32
	f3TimeClockRefAlias	F3DisplayString
	f3TimeClockRefReference	VariablePointer
	f3TimeClockRefPriority	Integer32
	f3TimeClockRefStatus	SyncRefStatus
	f3TimeClockRefState	SyncRefState
	f3TimeClockRefOperationType	SyncOperationType
	f3TimeClockRefStorageType	StorageType
	f3TimeClockRefRowStatus	RowStatus

Defined Values

f3SyncMIB		1.3.6.1.4.1.2544.1.12.12
This module defines the Synchronization MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
MODULE-IDENTITY

f3SyncObjects		1.3.6.1.4.1.2544.1.12.12.1
OBJECT IDENTIFIER

f3SyncConformance		1.3.6.1.4.1.2544.1.12.12.2
OBJECT IDENTIFIER

f3SyncTable		1.3.6.1.4.1.2544.1.12.12.1.1
A list of entries corresponding to the Sync entities.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F3SyncEntry

f3SyncEntry		1.3.6.1.4.1.2544.1.12.12.1.1.1
An entry containing information applicable to a particular Sync Entity.
Status: current	Access: not-accessible
OBJECT-TYPE
	F3SyncEntry

f3SyncIndex		1.3.6.1.4.1.2544.1.12.12.1.1.1.1
Unique index value associated with the Synchronization Entity.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

f3SyncAdminState		1.3.6.1.4.1.2544.1.12.12.1.1.1.2
This object represents the Administrative State of the Sync Entity.
Status: current	Access: read-write
OBJECT-TYPE
	AdminState

f3SyncOperationalState		1.3.6.1.4.1.2544.1.12.12.1.1.1.3
This object represents the Operational State of the Sync Entity.
Status: current	Access: read-only
OBJECT-TYPE
	OperationalState

f3SyncSecondaryState		1.3.6.1.4.1.2544.1.12.12.1.1.1.4
This object represents the Secondary State of the Sync Entity.
Status: current	Access: read-only
OBJECT-TYPE
	SecondaryState

f3SyncNetworkClockType		1.3.6.1.4.1.2544.1.12.12.1.1.1.5
This object represents the regional clock type for the system. This object determines which QL codes are supported.
Status: current	Access: read-write
OBJECT-TYPE
	NetworkClockType

f3SyncSelectedReference		1.3.6.1.4.1.2544.1.12.12.1.1.1.6
This object provides the source of the currently selected Sync reference. This would be the OID of the actual entity (bits port, traffic port etc.). An OID value of {0 0} represents internal clock.
Status: current	Access: read-only
OBJECT-TYPE
	VariablePointer

f3SyncClockMode		1.3.6.1.4.1.2544.1.12.12.1.1.1.7
This object provides the system clock mode.
Status: current	Access: read-only
OBJECT-TYPE
	ClockMode

f3SyncQL		1.3.6.1.4.1.2544.1.12.12.1.1.1.8
This object provides the QL of the system reference. This is the value for each external reference's Transmit QL attribute unless it should be transmitting QL-DNU.
Status: current	Access: read-only
OBJECT-TYPE
	SSMQualityLevel

f3SyncAlias		1.3.6.1.4.1.2544.1.12.12.1.1.1.9
This object allows SNMP management entities to provide an alias to the Sync entity.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..256)

f3SyncDomain		1.3.6.1.4.1.2544.1.12.12.1.1.1.10
This object represents the Sync entity's domain type. A Sync entity can be in chassis (system) domain (applicable for HUB shelf and Aggregation shelf) or line card domain (applicable for HUB shelf, Aggregation shelf as well as NIDs).
Status: current	Access: read-write
OBJECT-TYPE
	SyncDomainType

f3SyncSelectionMode		1.3.6.1.4.1.2544.1.12.12.1.1.1.11
This object represents the Sync entity's selection mode. If this mode is configured as ql-mode, the selection of which reference should be used shall be based upon the reference's Quality Level. The highest received Quality Level shall be the selected reference. The priority shall only be used to distinguish between references with the same received QL. When multiple references have the same QL and same priority, the behavior of selection process within the group is non-revertive. If this mode is configued as priority-mode, the selection of which reference should be used shall be based upon the reference's priority (i.e. QL is disabled). When multiple references have the same priority, the behavior of selection process within the group is non-revertive.
Status: current	Access: read-write
OBJECT-TYPE
	SyncSelectionMode

f3SyncWaitToRestoreTime		1.3.6.1.4.1.2544.1.12.12.1.1.1.12
This object allows configuration of the Sync entity's wait-to-restore time (in minutes). A value of 0 disables WTR timers for all references.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..12

f3SyncOperationSyncRef		1.3.6.1.4.1.2544.1.12.12.1.1.1.13
This object allows configuration of the Object Identifier of the Sync Reference Entity on which the f3SyncOperationType is performed. A value of 0.0 denotes no sync reference is chosen for operation.
Status: current	Access: read-write
OBJECT-TYPE
	VariablePointer

f3SyncOperationType		1.3.6.1.4.1.2544.1.12.12.1.1.1.14
This object allows to perform the specified operation on the Sync Reference specified by f3SyncOperationSyncRef.
Status: current	Access: read-write
OBJECT-TYPE
	SyncOperationType

f3SyncRefTable		1.3.6.1.4.1.2544.1.12.12.1.2
A list of entries corresponding to the Sync Reference entities.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F3SyncRefEntry

f3SyncRefEntry		1.3.6.1.4.1.2544.1.12.12.1.2.1
An entry containing information applicable to a particular Sync Reference Entity.
Status: current	Access: not-accessible
OBJECT-TYPE
	F3SyncRefEntry

f3SyncRefIndex		1.3.6.1.4.1.2544.1.12.12.1.2.1.1
Unique index value associated with the Sync Reference Entity.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

f3SyncRefReference		1.3.6.1.4.1.2544.1.12.12.1.2.1.2
This object represents the external sync reference to be used as system clock reference source.
Status: current	Access: read-create
OBJECT-TYPE
	VariablePointer

f3SyncRefPriority		1.3.6.1.4.1.2544.1.12.12.1.2.1.3
This object represents the priority of the external sync reference to be used as system clock reference source. This value is not mandatory when a single clock reference source is supported. Lower priority value indicates higher priority.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..10

f3SyncRefStatus		1.3.6.1.4.1.2544.1.12.12.1.2.1.4
This object provides the sync reference status.
Status: current	Access: read-only
OBJECT-TYPE
	SyncRefStatus

f3SyncRefState		1.3.6.1.4.1.2544.1.12.12.1.2.1.5
This object provides the sync reference state.
Status: current	Access: read-only
OBJECT-TYPE
	SyncRefState

f3SyncRefReceivedQL		1.3.6.1.4.1.2544.1.12.12.1.2.1.6
This object provides the sync reference received QL.
Status: current	Access: read-only
OBJECT-TYPE
	SSMQualityLevel

f3SyncRefStorageType		1.3.6.1.4.1.2544.1.12.12.1.2.1.7
The type of storage configured for this entry.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

f3SyncRefRowStatus		1.3.6.1.4.1.2544.1.12.12.1.2.1.8
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncRefRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncRefRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncRefRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

f3SyncRefAlias		1.3.6.1.4.1.2544.1.12.12.1.2.1.9
This object allows SNMP management entities to provide an alias to the Sync Reference entity.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..256)

f3SyncRefEffectiveQL		1.3.6.1.4.1.2544.1.12.12.1.2.1.10
This object provides the sync reference effective QL.
Status: current	Access: read-only
OBJECT-TYPE
	SSMQualityLevel

f3SyncRefOperationType		1.3.6.1.4.1.2544.1.12.12.1.2.1.11
This object provides information on the current/active operation on this sync reference.
Status: current	Access: read-only
OBJECT-TYPE
	SyncOperationType

f3TimeClockTable		1.3.6.1.4.1.2544.1.12.12.1.3
A list of entries corresponding to the Time Clock entities.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F3TimeClockEntry

f3TimeClockEntry		1.3.6.1.4.1.2544.1.12.12.1.3.1
An entry containing information applicable to a particular Time Clock Entity.
Status: current	Access: not-accessible
OBJECT-TYPE
	F3TimeClockEntry

f3TimeClockIndex		1.3.6.1.4.1.2544.1.12.12.1.3.1.1
Unique index value associated with the Time Clock Entity.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

f3TimeClockAlias		1.3.6.1.4.1.2544.1.12.12.1.3.1.2
This object allows SNMP management entities to provide an alias to the Time Clock entity.
Status: current	Access: read-write
OBJECT-TYPE
	F3DisplayString	Size(0..256)

f3TimeClockAdminState		1.3.6.1.4.1.2544.1.12.12.1.3.1.3
This object represents the Administrative State of the Time Clock Entity.
Status: current	Access: read-write
OBJECT-TYPE
	AdminState

f3TimeClockOperationalState		1.3.6.1.4.1.2544.1.12.12.1.3.1.4
This object represents the Operational State of the Time Clock Entity.
Status: current	Access: read-only
OBJECT-TYPE
	OperationalState

f3TimeClockSecondaryState		1.3.6.1.4.1.2544.1.12.12.1.3.1.5
This object represents the Secondary State of the Time Clock Entity.
Status: current	Access: read-only
OBJECT-TYPE
	SecondaryState

f3TimeClockSelectedReference		1.3.6.1.4.1.2544.1.12.12.1.3.1.6
This object provides the source of the currently selected Time Clock reference. This would be the OID of the actual entity (GPS port, PPS port etc.). An OID value of {0 0} represents internal clock.
Status: current	Access: read-only
OBJECT-TYPE
	VariablePointer

f3TimeClockClockMode		1.3.6.1.4.1.2544.1.12.12.1.3.1.7
This object provides the Time Clock mode.
Status: current	Access: read-only
OBJECT-TYPE
	TimeClockMode

f3TimeClockClockClass		1.3.6.1.4.1.2544.1.12.12.1.3.1.8
This object provides the Time Clock Clock Class
Status: deprecated	Access: read-only
OBJECT-TYPE
	Unsigned32

f3TimeClockSelectionMode		1.3.6.1.4.1.2544.1.12.12.1.3.1.9
!! Currently Only Priority Mode is supported !! This object represents the Time Clock entity's selection mode. If this mode is configured as ql-mode, the selection of which reference should be used shall be based upon the reference's Quality Level. The highest received Quality Level shall be the selected reference. The priority shall only be used to distinguish between references with the same received QL. When multiple references have the same QL and same priority, the behavior of selection process within the group is non-revertive. If this mode is configued as priority-mode, the selection of which reference should be used shall be based upon the reference's priority (i.e. QL is disabled). When multiple references have the same priority, the behavior of selection process within the group is non-revertive.
Status: current	Access: read-write
OBJECT-TYPE
	SyncSelectionMode

f3TimeClockWaitToRestoreTime		1.3.6.1.4.1.2544.1.12.12.1.3.1.10
This object allows configuration of the Time Clock entity's wait-to-restore time (in minutes). A value of 0 disables WTR timers for all references.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..12

f3TimeClockOperationTimeClockRef		1.3.6.1.4.1.2544.1.12.12.1.3.1.11
This object allows configuration of the Object Identifier of the TimeClock Reference Entity on which the f3TimeClockOperationType is performed. A value of 0.0 denotes no Time Clock reference is chosen for operation.
Status: current	Access: read-write
OBJECT-TYPE
	VariablePointer

f3TimeClockOperationType		1.3.6.1.4.1.2544.1.12.12.1.3.1.12
This object allows to perform the specified operation on the Time Clock Reference specified by f3TimeClockOperationTimeClockRef.
Status: current	Access: read-write
OBJECT-TYPE
	SyncOperationType

f3TimeClockLeap59		1.3.6.1.4.1.2544.1.12.12.1.3.1.13
True if last minute of current UTC day contains 59 seconds, else false
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f3TimeClockLeap61		1.3.6.1.4.1.2544.1.12.12.1.3.1.14
True if last minute of current UTC day contains 61 seconds, else false
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f3TimeClockTimeTraceAbilityStatus		1.3.6.1.4.1.2544.1.12.12.1.3.1.15
This object describe the trace ability status.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTraceAbilityStatus

f3TimeClockExpectedQL		1.3.6.1.4.1.2544.1.12.12.1.3.1.16
This object describe the expected quality level.
Status: current	Access: read-write
OBJECT-TYPE
	SSMQualityLevel

f3TimeClockCurrentQL		1.3.6.1.4.1.2544.1.12.12.1.3.1.17
This object describe the current quality level.
Status: current	Access: read-only
OBJECT-TYPE
	SSMQualityLevel

f3TimeClockSyncRefCandidate		1.3.6.1.4.1.2544.1.12.12.1.3.1.18
This object describe whether it is sync reference candiddate.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

f3TimeClockTimeHoldoverPerformance		1.3.6.1.4.1.2544.1.12.12.1.3.1.19
This object describe the Holdover performance.
Status: current	Access: read-write
OBJECT-TYPE
	TimeHoldoverPerformance

f3TimeClockUtcOffset		1.3.6.1.4.1.2544.1.12.12.1.3.1.20
This object describe the UTC offset.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f3TimeClockCurrentTimeOfDay		1.3.6.1.4.1.2544.1.12.12.1.3.1.21
This object allows specification of the Time Clock Current Time of Day.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

f3TimeClockFrequencyReference		1.3.6.1.4.1.2544.1.12.12.1.3.1.22
This object provides the source of the currently selected frequency source for the Time Clock. This would be the OID of the actual entity (GNSS Receiver port, Input Frquency Port, Sync object). An OID value of {0.0} represents a state where the Time Clock does not use a dedicated frequency input.
Status: current	Access: read-write
OBJECT-TYPE
	VariablePointer

f3TimeClockFrequencyClockMode		1.3.6.1.4.1.2544.1.12.12.1.3.1.23
This object provides the Frequency Clock mode determined according to the used f3TimeClockFrequencyReference. In Case the f3TimeClockFrequencyReference is not selected (0.0), a 'notAvailable' value shall be used here
Status: current	Access: read-only
OBJECT-TYPE
	TimeClockMode

f3TimeClockRefTable		1.3.6.1.4.1.2544.1.12.12.1.4
A list of entries corresponding to the Time Clock Reference entities.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F3TimeClockRefEntry

f3TimeClockRefEntry		1.3.6.1.4.1.2544.1.12.12.1.4.1
An entry containing information applicable to a particular Time Clock Reference Entity.
Status: current	Access: not-accessible
OBJECT-TYPE
	F3TimeClockRefEntry

f3TimeClockRefIndex		1.3.6.1.4.1.2544.1.12.12.1.4.1.1
Unique index value associated with the Time Clock Reference Entity.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

f3TimeClockRefAlias		1.3.6.1.4.1.2544.1.12.12.1.4.1.2
This object allows SNMP management entities to provide an alias to the Time Clock Reference entity.
Status: current	Access: read-create
OBJECT-TYPE
	F3DisplayString	Size(0..256)

f3TimeClockRefReference		1.3.6.1.4.1.2544.1.12.12.1.4.1.3
This object represents the external reference to be used as system clock reference source.
Status: current	Access: read-create
OBJECT-TYPE
	VariablePointer

f3TimeClockRefPriority		1.3.6.1.4.1.2544.1.12.12.1.4.1.4
This object represents the priority of the external reference to be used as Time clock reference source. This value is not mandatory when a single clock reference source is supported. Lower priority value indicates higher priority.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..10

f3TimeClockRefStatus		1.3.6.1.4.1.2544.1.12.12.1.4.1.5
This object provides the Time Clock reference status.
Status: current	Access: read-only
OBJECT-TYPE
	SyncRefStatus

f3TimeClockRefState		1.3.6.1.4.1.2544.1.12.12.1.4.1.6
This object provides the Time Clock reference state.
Status: current	Access: read-only
OBJECT-TYPE
	SyncRefState

f3TimeClockRefOperationType		1.3.6.1.4.1.2544.1.12.12.1.4.1.7
This object provides information on the current/active operation on this Time Clock reference.
Status: current	Access: read-only
OBJECT-TYPE
	SyncOperationType

f3TimeClockRefStorageType		1.3.6.1.4.1.2544.1.12.12.1.4.1.8
The type of storage configured for this entry.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

f3TimeClockRefRowStatus		1.3.6.1.4.1.2544.1.12.12.1.4.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3TimeClockRefRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3TimeClockRefRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3TimeClockRefRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

f3SyncCompliances		1.3.6.1.4.1.2544.1.12.12.2.1
OBJECT IDENTIFIER

f3SyncGroups		1.3.6.1.4.1.2544.1.12.12.2.2
OBJECT IDENTIFIER

f3SyncCompliance		1.3.6.1.4.1.2544.1.12.12.2.1.1
Describes the requirements for conformance to the F3 Sync group.
Status: current	Access: read-create
MODULE-COMPLIANCE

f3SyncObjectGroup		1.3.6.1.4.1.2544.1.12.12.2.2.1
A collection of objects used to manage the F3 Sync Object group.
Status: current	Access: read-create
OBJECT-GROUP

f3TimeClockObjectGroup		1.3.6.1.4.1.2544.1.12.12.2.2.2
A collection of objects used to manage the F3 TimeClock Object group.
Status: current	Access: read-create
OBJECT-GROUP