FASTPATH-GREENETHERNET-PRIVATE-MIB

File: FASTPATH-GREENETHERNET-PRIVATE-MIB.mib (15995 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
RFC1213-MIB BROADCOM-REF-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 Integer32 TEXTUAL-CONVENTION
InterfaceIndexOrZero DisplayString fastPath
ng700smartswitch

Defined Types

AgentGreenEthernetEntry  
SEQUENCE    
  agentEthernetIntfIndex INTEGER
  agentGreenEnergyDetectMode INTEGER
  agentGreenEnergyDetectOperStatus INTEGER
  agentGreenEnergyDetectOperReason DisplayString
  agentGreenAutoShortReachMode INTEGER
  agentGreenForceShortReachMode INTEGER
  agentGreenShortReachOperStatus INTEGER
  agentGreenShortReachOperReason DisplayString
  agentGreenEeeMode INTEGER
  agentGreenEeeTxWakeTime INTEGER
  agentGreenEeeTxIdleTime INTEGER
  agentGreenCumEnergySaving INTEGER

AgentGreenIntfEeeLpiHistoryEntry  
SEQUENCE    
  agentGreenEeeLpiHistoryIntfIndex INTEGER
  agentGreenEeeLpiHistoryIntfSampleIndex INTEGER
  agentGreenEeeLpiHistoryIntfSampleTime DisplayString
  agentGreenEeeLpiHistoryIntfPercentLpiTime INTEGER
  agentGreenEeeLpiHistoryIntfPercentLpiTimeTotal INTEGER

AgentGreenUnitFeatureEntry  
SEQUENCE    
  agentGreenUnitIndex INTEGER
  agentGreenFeatureList DisplayString

Defined Values

fastPathGreenEthernet 1.3.6.1.4.1.4526.11.500
The MIB definitions for FASTPATH Green Ethernet Feature.
MODULE-IDENTITY    

agentGreenEthernet 1.3.6.1.4.1.4526.11.500.1
OBJECT IDENTIFIER    

agentGreenEthernetTable 1.3.6.1.4.1.4526.11.500.1.1
A table providing configuration of green Ethernet features
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentGreenEthernetEntry

agentGreenEthernetEntry 1.3.6.1.4.1.4526.11.500.1.1.1
Green Ethernet features for a port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentGreenEthernetEntry  

agentEthernetIntfIndex 1.3.6.1.4.1.4526.11.500.1.1.1.1
This is a unique index for an entry in the agentGreenEthernetTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTable. A value of zero represents global configuration, which in turn causes all interface entries to be updated for a set operation, or reflects the most recent global setting for a get operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4096  

agentGreenEnergyDetectMode 1.3.6.1.4.1.4526.11.500.1.1.1.2
Enable or disable Energy Detect Mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

agentGreenEnergyDetectOperStatus 1.3.6.1.4.1.4526.11.500.1.1.1.3
This tells if energy detect operational status is currently active or inactive. The energy detect mode may be administratively enabled, but the operational status may be inactive.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), in-active(0)  

agentGreenEnergyDetectOperReason 1.3.6.1.4.1.4526.11.500.1.1.1.4
The energy detect mode may be administratively enabled, but the operational status may be inactive. The reasons for this may be that the Port is currently operating in the fiber mode, the Link is up, or the Admin Mode is Down. If the energy-detect operational status is active, then the reason field shows up as No energy Detected
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

agentGreenAutoShortReachMode 1.3.6.1.4.1.4526.11.500.1.1.1.5
Enable or disable Auto Short Reach Mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

agentGreenForceShortReachMode 1.3.6.1.4.1.4526.11.500.1.1.1.6
Enable or disable Force Short Reach Mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

agentGreenShortReachOperStatus 1.3.6.1.4.1.4526.11.500.1.1.1.7
This tells if short reach operational status is currently active or inactive. The short reach mode may be administratively enabled, but the operational status may be inactive.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), in-active(2)  

agentGreenShortReachOperReason 1.3.6.1.4.1.4526.11.500.1.1.1.8
The short-reach mode may be administratively enabled, but the operational status may be inactive. The reason may be that cable is Long, or the Link may be Down. If the short reach operational status is active, then the reason field shows up as short cable or Forced.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

agentGreenEeeMode 1.3.6.1.4.1.4526.11.500.1.1.1.9
Enable or disable Energy Efficient Ethernet Mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

agentGreenEeeTxWakeTime 1.3.6.1.4.1.4526.11.500.1.1.1.10
Time for which MAC / switch has to wait to go back to ACTIVE state from LPI state when it receives packet for transmission.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2560  

agentGreenEeeTxIdleTime 1.3.6.1.4.1.4526.11.500.1.1.1.11
Time for which condition to move to LPI state is satisfied, at the end of which MAC TX transitions to LPI state
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2560  

agentGreenCumEnergySaving 1.3.6.1.4.1.4526.11.500.1.1.1.12
Estimated Cumulative Energy Saved on this port in (Watt*hours).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2560  

agentGreenIntfEeeLpiHistoryTable 1.3.6.1.4.1.4526.11.500.1.2
A table providing configuration and status of green Ethernet Power Saving History feature
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentGreenIntfEeeLpiHistoryEntry

agentGreenIntfEeeLpiHistoryEntry 1.3.6.1.4.1.4526.11.500.1.2.1
Green Ethernet features for a port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentGreenIntfEeeLpiHistoryEntry  

agentGreenEeeLpiHistoryIntfIndex 1.3.6.1.4.1.4526.11.500.1.2.1.1
This is a unique index for an entry in the agentGreenEthernetTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4096  

agentGreenEeeLpiHistoryIntfSampleIndex 1.3.6.1.4.1.4526.11.500.1.2.1.2
This is a unique index for an entry in the agentGreenEthernetTable. A non-zero value indicates the sampleIndex for the corresponding sample entry in the Power Saving History Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..2147483647  

agentGreenEeeLpiHistoryIntfSampleTime 1.3.6.1.4.1.4526.11.500.1.2.1.3
Time at which the Sample was collected.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

agentGreenEeeLpiHistoryIntfPercentLpiTime 1.3.6.1.4.1.4526.11.500.1.2.1.4
Percentage of Time spent in LPI mode on this port since last sample.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2560  

agentGreenEeeLpiHistoryIntfPercentLpiTimeTotal 1.3.6.1.4.1.4526.11.500.1.2.1.5
Percentage of Time spent in LPI mode on this port since last reset.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2560  

agentGreenEeeLpiHistoryIntfSampleInterval 1.3.6.1.4.1.4526.11.500.1.4
Interval at which power consumption data needs to be collected.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 30..36000  

agentGreenEeeLpiHistoryIntfMaxSamples 1.3.6.1.4.1.4526.11.500.1.5
Maximum number of samples to keep.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..168  

agentGreenUnitFeatureTable 1.3.6.1.4.1.4526.11.500.1.3
A table providing configuration and status of green Ethernet Power Saving History feature
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentGreenUnitFeatureEntry

agentGreenUnitFeatureEntry 1.3.6.1.4.1.4526.11.500.1.3.1
Green Ethernet features for a port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentGreenUnitFeatureEntry  

agentGreenUnitIndex 1.3.6.1.4.1.4526.11.500.1.3.1.1
This is a unique index for an entry in the agentGreenUnitFeatureTable. A non-zero value indicates the unitIndex for the corresponding unit entry in the Green Ethernet Unit Feature Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..8  

agentGreenFeatureList 1.3.6.1.4.1.4526.11.500.1.3.1.2
List of Green Features supported on the given unit which could be one or more of the following: Energy-Detect (Energy Detect) Short-Reach (Short Reach) EEE (Energy Efficient Ethernet) LPI-History (EEE Low Power Idle History) LLDP-Cap-Exchg (EEE LLDP Capability Exchange) Pwr-Usg-Est (Power Usage Estimates).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..128)  

agentGreenEeeLpiHistoryLpiTimePerStack 1.3.6.1.4.1.4526.11.500.1.6
Percentage of LPI time per stack.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..100  

agentGreenStackCumEnergySaving 1.3.6.1.4.1.4526.11.500.1.7
Estimated Cumulative Energy Saving (Watts * Hours) per Stack.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2560  

agentGreenStackCurPowerConsumption 1.3.6.1.4.1.4526.11.500.1.8
Estimated Current Power Consumption (mWatts) per Stack.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2560  

agentGreenStackPowerSaving 1.3.6.1.4.1.4526.11.500.1.9
Estimated Percentage Power Saving per Stack.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2560