FCFABRIC-ELEMENT-MIB
File:
FCFABRIC-ELEMENT-MIB.mib (78995 bytes)
Imported modules
Imported symbols
Defined Types
Fc0BaudRate |
|
INTEGER |
other(1), oneEighth(2), quarter(4), half(8), full(16), double(32), quadruple(64) |
|
|
Fc0Medium |
|
INTEGER |
unknown(1), sm(2), m5(4), m6(8), tv(16), mi(32), stp(64), tw(128), lv(256) |
|
|
Fc0TxType |
|
INTEGER |
unknown(1), longWaveLaser(2), shortWaveLaser(3), longWaveLED(4), electrical(5), shortWaveLaser-noOFC(6) |
|
|
Fc0Distance |
|
INTEGER |
unknown(1), long(2), intermediate(3), short(4) |
|
|
FcFeModuleEntry |
|
SEQUENCE |
|
|
|
|
fcFeModuleIndex |
FcFeModuleIndex |
|
|
fcFeModuleDescr |
DisplayString |
|
|
fcFeModuleObjectID |
OBJECT IDENTIFIER |
|
|
fcFeModuleOperStatus |
INTEGER |
|
|
fcFeModuleLastChange |
TimeTicks |
|
|
fcFeModuleFxPortCapacity |
FcFeFxPortCapacity |
|
|
fcFeModuleName |
FcNameId |
|
FcFxConfEntry |
|
SEQUENCE |
|
|
|
|
fcFxConfModuleIndex |
FcFeModuleIndex |
|
|
fcFxConfFxPortIndex |
FcFeFxPortIndex |
|
|
fcFxPortName |
FcPortName |
|
|
fcFxPortFcphVersionHigh |
FcphVersion |
|
|
fcFxPortFcphVersionLow |
FcphVersion |
|
|
fcFxPortBbCredit |
FcBbCredit |
|
|
fcFxPortRxBufSize |
FcRxDataFieldSize |
|
|
fcFxPortRatov |
MilliSeconds |
|
|
fcFxPortEdtov |
MilliSeconds |
|
|
fcFxPortCosSupported |
FcCosCap |
|
|
fcFxPortIntermixSupported |
TruthValue |
|
|
fcFxPortStackedConnMode |
FcStackedConnMode |
|
|
fcFxPortClass2SeqDeliv |
TruthValue |
|
|
fcFxPortClass3SeqDeliv |
TruthValue |
|
|
fcFxPortHoldTime |
MicroSeconds |
|
|
fcFxPortBaudRate |
Fc0BaudRate |
|
|
fcFxPortMedium |
Fc0Medium |
|
|
fcFxPortTxType |
Fc0TxType |
|
|
fcFxPortDistance |
Fc0Distance |
|
FcFxPortOperEntry |
|
SEQUENCE |
|
|
|
|
fcFxPortOperModuleIndex |
FcFeModuleIndex |
|
|
fcFxPortOperFxPortIndex |
FcFeFxPortIndex |
|
|
fcFxPortID |
FcAddressId |
|
|
fcFPortAttachedPortName |
FcPortName |
|
|
fcFPortConnectedPort |
FcAddressId |
|
|
fcFxPortBbCreditAvailable |
Gauge32 |
|
|
fcFxPortOperMode |
FcFxPortMode |
|
|
fcFxPortAdminMode |
FcFxPortMode |
|
FcFxPortPhysEntry |
|
SEQUENCE |
|
|
|
|
fcFxPortPhysModuleIndex |
FcFeModuleIndex |
|
|
fcFxPortPhysFxPortIndex |
FcFeFxPortIndex |
|
|
fcFxPortPhysAdminStatus |
INTEGER |
|
|
fcFxPortPhysOperStatus |
INTEGER |
|
|
fcFxPortPhysLastChange |
TimeTicks |
|
|
fcFxPortPhysRttov |
MilliSeconds |
|
FcFxlogiEntry |
|
SEQUENCE |
|
|
|
|
fcFxlogiModuleIndex |
FcFeModuleIndex |
|
|
fcFxlogiFxPortIndex |
FcFeFxPortIndex |
|
|
fcFxlogiNxPortIndex |
FcFeNxPortIndex |
|
|
fcFxPortFcphVersionAgreed |
FcphVersion |
|
|
fcFxPortNxPortBbCredit |
FcBbCredit |
|
|
fcFxPortNxPortRxDataFieldSize |
FcRxDataFieldSize |
|
|
fcFxPortCosSuppAgreed |
FcCosCap |
|
|
fcFxPortIntermixSuppAgreed |
TruthValue |
|
|
fcFxPortStackedConnModeAgreed |
FcStackedConnMode |
|
|
fcFxPortClass2SeqDelivAgreed |
TruthValue |
|
|
fcFxPortClass3SeqDelivAgreed |
TruthValue |
|
|
fcFxPortNxPortName |
FcPortName |
|
|
fcFxPortConnectedNxPort |
FcAddressId |
|
|
fcFxPortBbCreditModel |
FcBbCreditModel |
|
FcFxPortErrorEntry |
|
SEQUENCE |
|
|
|
|
fcFxPortErrorModuleIndex |
FcFeModuleIndex |
|
|
fcFxPortErrorFxPortIndex |
FcFeFxPortIndex |
|
|
fcFxPortLinkFailures |
Counter |
|
|
fcFxPortSyncLosses |
Counter |
|
|
fcFxPortSigLosses |
Counter |
|
|
fcFxPortPrimSeqProtoErrors |
Counter |
|
|
fcFxPortInvalidTxWords |
Counter |
|
|
fcFxPortInvalidCrcs |
Counter |
|
|
fcFxPortDelimiterErrors |
Counter |
|
|
fcFxPortAddressIdErrors |
Counter |
|
|
fcFxPortLinkResetIns |
Counter |
|
|
fcFxPortLinkResetOuts |
Counter |
|
|
fcFxPortOlsIns |
Counter |
|
|
fcFxPortOlsOuts |
Counter |
|
FcFxPortC1AcctEntry |
|
SEQUENCE |
|
|
|
|
fcFxPortC1AcctModuleIndex |
FcFeModuleIndex |
|
|
fcFxPortC1AcctFxPortIndex |
FcFeFxPortIndex |
|
|
fcFxPortC1InConnections |
Counter |
|
|
fcFxPortC1OutConnections |
Counter |
|
|
fcFxPortC1FbsyFrames |
Counter |
|
|
fcFxPortC1FrjtFrames |
Counter |
|
|
fcFxPortC1ConnTime |
Counter |
|
|
fcFxPortC1InFrames |
Counter |
|
|
fcFxPortC1OutFrames |
Counter |
|
|
fcFxPortC1InOctets |
Counter |
|
|
fcFxPortC1OutOctets |
Counter |
|
|
fcFxPortC1Discards |
Counter |
|
FcFxPortC2AcctEntry |
|
SEQUENCE |
|
|
|
|
fcFxPortC2AcctModuleIndex |
FcFeModuleIndex |
|
|
fcFxPortC2AcctFxPortIndex |
FcFeFxPortIndex |
|
|
fcFxPortC2InFrames |
Counter |
|
|
fcFxPortC2OutFrames |
Counter |
|
|
fcFxPortC2InOctets |
Counter |
|
|
fcFxPortC2OutOctets |
Counter |
|
|
fcFxPortC2Discards |
Counter |
|
|
fcFxPortC2FbsyFrames |
Counter |
|
|
fcFxPortC2FrjtFrames |
Counter |
|
FcFxPortC3AcctEntry |
|
SEQUENCE |
|
|
|
|
fcFxPortC3AcctModuleIndex |
FcFeModuleIndex |
|
|
fcFxPortC3AcctFxPortIndex |
FcFeFxPortIndex |
|
|
fcFxPortC3InFrames |
Counter |
|
|
fcFxPortC3OutFrames |
Counter |
|
|
fcFxPortC3InOctets |
Counter |
|
|
fcFxPortC3OutOctets |
Counter |
|
|
fcFxPortC3Discards |
Counter |
|
FcFxPortCapEntry |
|
SEQUENCE |
|
|
|
|
fcFxPortCapModuleIndex |
FcFeModuleIndex |
|
|
fcFxPortCapFxPortIndex |
FcFeFxPortIndex |
|
|
fcFxPortCapFcphVersionHigh |
FcphVersion |
|
|
fcFxPortCapFcphVersionLow |
FcphVersion |
|
|
fcFxPortCapBbCreditMax |
FcBbCredit |
|
|
fcFxPortCapBbCreditMin |
FcBbCredit |
|
|
fcFxPortCapRxDataFieldSizeMax |
FcRxDataFieldSize |
|
|
fcFxPortCapRxDataFieldSizeMin |
FcRxDataFieldSize |
|
|
fcFxPortCapCos |
FcCosCap |
|
|
fcFxPortCapIntermix |
TruthValue |
|
|
fcFxPortCapStackedConnMode |
FcStackedConnMode |
|
|
fcFxPortCapClass2SeqDeliv |
TruthValue |
|
|
fcFxPortCapClass3SeqDeliv |
TruthValue |
|
|
fcFxPortCapHoldTimeMax |
MicroSeconds |
|
|
fcFxPortCapHoldTimeMin |
MicroSeconds |
|
|
fcFxPortCapBaudRates |
Fc0BaudRateCap |
|
|
fcFxPortCapMedia |
Fc0MediaCap |
|
Defined Values
fcFabric |
1.3.6.1.3.42.2 |
OBJECT IDENTIFIER |
|
|
|
fcFe |
1.3.6.1.3.42.2.1 |
OBJECT IDENTIFIER |
|
|
|
fcFeOp |
1.3.6.1.3.42.2.1.2 |
OBJECT IDENTIFIER |
|
|
|
fcFeError |
1.3.6.1.3.42.2.1.3 |
OBJECT IDENTIFIER |
|
|
|
fcFeAcct |
1.3.6.1.3.42.2.1.4 |
OBJECT IDENTIFIER |
|
|
|
fcFeCap |
1.3.6.1.3.42.2.1.5 |
OBJECT IDENTIFIER |
|
|
|
fcFabricName |
1.3.6.1.3.42.2.1.1.1 |
The Name_Identifier of the Fabric to which this Fabric
Element belongs. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FabricName |
|
|
fcElementName |
1.3.6.1.3.42.2.1.1.2 |
The Name_Identifier of the Fabric Element. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcNameId |
|
|
fcFeModuleCapacity |
1.3.6.1.3.42.2.1.1.3 |
The maximum number of modules in the Fabric Element,
regardless of their current state. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeModuleCapacity |
|
|
fcFeModuleTable |
1.3.6.1.3.42.2.1.1.4 |
A table that contains, one entry for each module in the
Fabric Element, information of the modules. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FcFeModuleEntry |
|
fcFeModuleEntry |
1.3.6.1.3.42.2.1.1.4.1 |
An entry containing the configuration parameters of a
module. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FcFeModuleEntry |
|
|
fcFeModuleIndex |
1.3.6.1.3.42.2.1.1.4.1.1 |
This object identifies the module within the Fabric
Element for which this entry contains information. This
value is never greater than fcFeModuleCapacity. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeModuleIndex |
|
|
fcFeModuleDescr |
1.3.6.1.3.42.2.1.1.4.1.2 |
A textual description of the module. This value should
include the full name and version identification of the
module. It should contain printable ASCII characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fcFeModuleObjectID |
1.3.6.1.3.42.2.1.1.4.1.3 |
The vendor's authoritative identification of the module.
This value may be allocated within the SMI enterprises
subtree (1.3.6.1.4.1) and provides a straight-forward
and unambiguous means for determining what kind of
module is being managed.
For example, this object could take the value
1.3.6.1.4.1.99649.3.9 if vendor 'Neufe Inc.' was
assigned the subtree 1.3.6.1.4.1.99649, and had assigned
the identifier 1.3.6.1.4.1.99649.3.9 to its 'FeFiFo-16
PlugInCard.' |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
fcFeModuleOperStatus |
1.3.6.1.3.42.2.1.1.4.1.4 |
This object indicates the operational status of the
module:
online(1) the module is functioning properly;
offline(2) the module is not available;
testing(3) the module is under testing; and
faulty(4) the module is defective in some way. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
online(1), offline(2), testing(3), faulty(4) |
|
fcFeModuleLastChange |
1.3.6.1.3.42.2.1.1.4.1.5 |
This object contains the value of sysUpTime when the
module entered its current operational status. A value
of zero indicates that the operational status of the
module has not changed since the agent last restarted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
fcFeModuleFxPortCapacity |
1.3.6.1.3.42.2.1.1.4.1.6 |
The number of FxPort that can be contained within the
module. Within each module, the ports are uniquely
numbered in the range from 1 to fcFeModuleFxPortCapacity
inclusive. However, the numbers are not required to be
contiguous. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeFxPortCapacity |
|
|
fcFeModuleName |
1.3.6.1.3.42.2.1.1.4.1.7 |
The Name_Identifier of the module. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcNameId |
|
|
fcFxConfTable |
1.3.6.1.3.42.2.1.1.5 |
A table that contains, one entry for each FxPort in the
Fabric Element, configuration and service parameters of
the FxPorts. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FcFxConfEntry |
|
fcFxConfEntry |
1.3.6.1.3.42.2.1.1.5.1 |
An entry containing the configuration and service
parameters of a FxPort. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FcFxConfEntry |
|
|
fcFxConfModuleIndex |
1.3.6.1.3.42.2.1.1.5.1.1 |
This object identifies the module containing the FxPort
for which this entry contains information. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeModuleIndex |
|
|
fcFxConfFxPortIndex |
1.3.6.1.3.42.2.1.1.5.1.2 |
This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeFxPortIndex |
|
|
fcFxPortName |
1.3.6.1.3.42.2.1.1.5.1.3 |
The name identifier of this FxPort. Each FxPort has a
unique port name within the address space of the
Fabric. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcPortName |
|
|
fcFxPortFcphVersionHigh |
1.3.6.1.3.42.2.1.1.5.1.4 |
The highest or most recent version of FC-PH that the
FxPort is configured to support. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcphVersion |
|
|
fcFxPortFcphVersionLow |
1.3.6.1.3.42.2.1.1.5.1.5 |
The lowest or earliest version of FC-PH that the FxPort
is configured to support. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcphVersion |
|
|
fcFxPortBbCredit |
1.3.6.1.3.42.2.1.1.5.1.6 |
The total number of receive buffers available for
holding Class 1 connect-request, Class 2 or 3 frames
from the attached NxPort. It is for buffer-to-buffer
flow control in the direction from the attached NxPort
(if applicable) to FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcBbCredit |
|
|
fcFxPortRxBufSize |
1.3.6.1.3.42.2.1.1.5.1.7 |
The largest Data_Field Size (in octets) for an FT_1
frame that can be received by the FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcRxDataFieldSize |
|
|
fcFxPortRatov |
1.3.6.1.3.42.2.1.1.5.1.8 |
The Resource_Allocation_Timeout Value configured for the
FxPort. This is used as the timeout value for
determining when to reuse an NxPort resource such as a
Recovery_Qualifier. It represents E_D_TOV (see next
object) plus twice the maximum time that a frame may be
delayed within the Fabric and still be delivered. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MilliSeconds |
|
|
fcFxPortEdtov |
1.3.6.1.3.42.2.1.1.5.1.9 |
The E_D_TOV value configured for the FxPort. The
Error_Detect_Timeout Value is used as the timeout value
for detecting an error condition. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MilliSeconds |
|
|
fcFxPortCosSupported |
1.3.6.1.3.42.2.1.1.5.1.10 |
A value indicating the set of Classes of Service
supported by the FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcCosCap |
|
|
fcFxPortIntermixSupported |
1.3.6.1.3.42.2.1.1.5.1.11 |
A flag indicating whether or not the FxPort supports an
Intermixed Dedicated Connection. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
fcFxPortClass2SeqDeliv |
1.3.6.1.3.42.2.1.1.5.1.13 |
A flag indicating whether or not Class 2 Sequential
Delivery is supported by the FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
fcFxPortClass3SeqDeliv |
1.3.6.1.3.42.2.1.1.5.1.14 |
A flag indicating whether or not Class 3 Sequential
Delivery is supported by the FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
fcFxPortHoldTime |
1.3.6.1.3.42.2.1.1.5.1.15 |
The maximum time (in microseconds) that the FxPort shall
hold a frame before discarding the frame if it is unable
to deliver the frame. The value 0 means that the FxPort
does not support this parameter. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MicroSeconds |
|
|
fcFxPortBaudRate |
1.3.6.1.3.42.2.1.1.5.1.16 |
The FC-0 baud rate of the FxPort. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Fc0BaudRate |
|
|
fcFxPortMedium |
1.3.6.1.3.42.2.1.1.5.1.17 |
The FC-0 medium of the FxPort. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Fc0Medium |
|
|
fcFxPortTxType |
1.3.6.1.3.42.2.1.1.5.1.18 |
The FC-0 transmitter type of the FxPort. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Fc0TxType |
|
|
fcFxPortDistance |
1.3.6.1.3.42.2.1.1.5.1.19 |
The FC-0 distance range of the FxPort transmitter. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Fc0Distance |
|
|
fcFxPortOperTable |
1.3.6.1.3.42.2.1.2.1 |
A table that contains, one entry for each FxPort in the
Fabric Element, operational status and parameters of the
FxPorts. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FcFxPortOperEntry |
|
fcFxPortOperEntry |
1.3.6.1.3.42.2.1.2.1.1 |
An entry containing operational status and parameters of
a FxPort. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FcFxPortOperEntry |
|
|
fcFxPortOperModuleIndex |
1.3.6.1.3.42.2.1.2.1.1.1 |
This object identifies the module containing the FxPort
for which this entry contains information. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeModuleIndex |
|
|
fcFxPortOperFxPortIndex |
1.3.6.1.3.42.2.1.2.1.1.2 |
This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeFxPortIndex |
|
|
fcFxPortID |
1.3.6.1.3.42.2.1.2.1.1.3 |
The address identifier by which this FxPort is
identified within the Fabric. The FxPort may assign its
address identifier to its attached NxPort(s) during
Fabric Login. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcAddressId |
|
|
fcFPortAttachedPortName |
1.3.6.1.3.42.2.1.2.1.1.4 |
The port name of the attached N_Port, if applicable. If
the value of this object is '0000000000000000'H, this
FxPort has no NxPort attached to it. This variable has
been deprecated and may be implemented for backward
compability. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcPortName |
|
|
fcFPortConnectedPort |
1.3.6.1.3.42.2.1.2.1.1.5 |
The address identifier of the destination FxPort with
which this FxPort is currently engaged in a either a
Class 1 or loop connection. If the value of this object
is '000000'H, this FxPort is not engaged in a
connection. This variable has been deprecated and may be
implemented for backward compability. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcAddressId |
|
|
fcFxPortBbCreditAvailable |
1.3.6.1.3.42.2.1.2.1.1.6 |
The number of buffers currently available for receiving
frames from the attached port in the buffer-to-buffer
flow control. The value should be less than or equal to
fcFxPortBbCredit. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
fcFxPortOperMode |
1.3.6.1.3.42.2.1.2.1.1.7 |
The current operational mode of the FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFxPortMode |
|
|
fcFxPortAdminMode |
1.3.6.1.3.42.2.1.2.1.1.8 |
The desired operational mode of the FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFxPortMode |
|
|
fcFxPortPhysTable |
1.3.6.1.3.42.2.1.2.3 |
A table that contains, one entry for each FxPort in the
Fabric Element, physical level status and parameters of
the FxPorts. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FcFxPortPhysEntry |
|
fcFxPortPhysEntry |
1.3.6.1.3.42.2.1.2.3.1 |
An entry containing physical level status and parameters
of a FxPort. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FcFxPortPhysEntry |
|
|
fcFxPortPhysModuleIndex |
1.3.6.1.3.42.2.1.2.3.1.1 |
This object identifies the module containing the FxPort
for which this entry contains information. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeModuleIndex |
|
|
fcFxPortPhysFxPortIndex |
1.3.6.1.3.42.2.1.2.3.1.2 |
This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeFxPortIndex |
|
|
fcFxPortPhysAdminStatus |
1.3.6.1.3.42.2.1.2.3.1.3 |
The desired state of the FxPort. A management station
may place the FxPort in a desired state by setting this
object accordingly. The testing(3) state indicates that
no operational frames can be passed. When a Fabric
Element initializes, all FxPorts start with
fcFxPortPhysAdminStatus in the offline(2) state. As the
result of either explicit management action or per
configuration information accessible by the Fabric
Element, fcFxPortPhysAdminStatus is then changed to
either the online(1) or testing(3) states, or remains in
the offline state. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
online(1), offline(2), testing(3) |
|
fcFxPortPhysOperStatus |
1.3.6.1.3.42.2.1.2.3.1.4 |
The current operational status of the FxPort. The
testing(3) indicates that no operational frames can
be passed. If fcFxPortPhysAdminStatus is offline(2)
then fcFxPortPhysOperStatus should be offline(2). If
fcFxPortPhysAdminStatus is changed to online(1) then
fcFxPortPhysOperStatus should change to online(1) if
the FxPort is ready to accept Fabric Login request
from the attached NxPort; it should proceed and
remain in the link-failure(4) state if and only if
there is a fault that prevents it from going to the
online(1) state. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
online(1), offline(2), testing(3), link-failure(4) |
|
fcFxPortPhysLastChange |
1.3.6.1.3.42.2.1.2.3.1.5 |
The value of sysUpTime at the time the FxPort
entered its current operational status. A value of
zero indicates that the FxPort's operational status
has not changed since the agent last restarted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
fcFxPortPhysRttov |
1.3.6.1.3.42.2.1.2.3.1.6 |
The Receiver_Transmitter_Timeout value of the
FxPort. This is used by the receiver logic to detect
Loss of Synchronization. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MilliSeconds |
|
|
fcFxlogiTable |
1.3.6.1.3.42.2.1.2.4 |
A table that contains, one entry for each FxPort in the
Fabric Element, services parameters established from the
most recent Fabric Login, explicit or implicit. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FcFxlogiEntry |
|
fcFxlogiEntry |
1.3.6.1.3.42.2.1.2.4.1 |
An entry containing service parameters established from
a successful Fabric Login. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FcFxlogiEntry |
|
|
fcFxlogiModuleIndex |
1.3.6.1.3.42.2.1.2.4.1.1 |
This object identifies the module containing the FxPort
for which this entry contains information. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeModuleIndex |
|
|
fcFxlogiFxPortIndex |
1.3.6.1.3.42.2.1.2.4.1.2 |
This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeFxPortIndex |
|
|
fcFxlogiNxPortIndex |
1.3.6.1.3.42.2.1.2.4.1.3 |
The object identifies the associated NxPort in the
attachment for which the entry contains information. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeNxPortIndex |
|
|
fcFxPortFcphVersionAgreed |
1.3.6.1.3.42.2.1.2.4.1.4 |
The version of FC-PH that the FxPort has agreed to
support from the Fabric Login |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcphVersion |
|
|
fcFxPortNxPortBbCredit |
1.3.6.1.3.42.2.1.2.4.1.5 |
The total number of buffers available for holding Class
1 connect-request, Class 2 or Class 3 frames to be
transmitted to the attached NxPort. It is for buffer-
to-buffer flow control in the direction from FxPort to
NxPort. The buffer-to-buffer flow control mechanism is
indicated in the respective fcFxPortBbCreditModel.
[1](23.6.2.2) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcBbCredit |
|
|
fcFxPortNxPortRxDataFieldSize |
1.3.6.1.3.42.2.1.2.4.1.6 |
The Receive Data Field Size of the attached NxPort. This
is a binary value that specifies the largest Data Field
Size for an FT_1 frame that can be received by the
NxPort. The value is in number of bytes and ranges from
128 to 2112 inclusive. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcRxDataFieldSize |
|
|
fcFxPortCosSuppAgreed |
1.3.6.1.3.42.2.1.2.4.1.7 |
A variable indicating that the attached NxPort has
requested the FxPort for the support of classes of
services and the FxPort has granted the request. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcCosCap |
|
|
fcFxPortIntermixSuppAgreed |
1.3.6.1.3.42.2.1.2.4.1.8 |
A variable indicating that the attached NxPort has
requested the FxPort for the support of Intermix and the
FxPort has granted the request. This flag is only valid
if Class 1 service is supported. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
fcFxPortStackedConnModeAgreed |
1.3.6.1.3.42.2.1.2.4.1.9 |
A variable indicating whether the FxPort has agreed to
support stacked connect from the Fabric Login. This is
only meaningful if Class 1 service has been agreed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcStackedConnMode |
|
|
fcFxPortClass2SeqDelivAgreed |
1.3.6.1.3.42.2.1.2.4.1.10 |
A variable indicating whether the FxPort has agreed to
support Class 2 sequential delivery from the Fabric
Login. This is only meaningful if Class 2 service has
been agreed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
fcFxPortClass3SeqDelivAgreed |
1.3.6.1.3.42.2.1.2.4.1.11 |
A flag indicating whether the FxPort has agreed to
support Class 3 sequential delivery from the Fabric
Login. This is only meaningful if Class 3 service has
been agreed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
fcFxPortNxPortName |
1.3.6.1.3.42.2.1.2.4.1.12 |
The port name of the attached NxPort, if applicable. If
the value of this object is '0000000000000000'H, this
FxPort has no NxPort attached to it. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcPortName |
|
|
fcFxPortConnectedNxPort |
1.3.6.1.3.42.2.1.2.4.1.13 |
The address identifier of the destination FxPort with
which this FxPort is currently engaged in a either a
Class 1 or loop connection. If the value of this object
is '000000'H, this FxPort is not engaged in a
connection. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcAddressId |
|
|
fcFxPortBbCreditModel |
1.3.6.1.3.42.2.1.2.4.1.14 |
This object identifies the BB_Credit model used by the
FxPort. The regular model refers to the Buffer-to-Buffer
flow control mechanism defined in FC-PH [1] is used
between the F_Port and the N_Port. For FL_Ports, the
Alternate Buffer-to-Buffer flow control mechanism as
defined in FC-AL [4] is used between the FL_Port and any
attached NL_Ports. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcBbCreditModel |
|
|
fcFxPortErrorTable |
1.3.6.1.3.42.2.1.3.1 |
A table that contains, one entry for each FxPort,
counters that record the numbers of errors detected. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FcFxPortErrorEntry |
|
fcFxPortErrorEntry |
1.3.6.1.3.42.2.1.3.1.1 |
An entry containing error counters of a FxPort. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FcFxPortErrorEntry |
|
|
fcFxPortErrorModuleIndex |
1.3.6.1.3.42.2.1.3.1.1.1 |
This object identifies the module containing the FxPort
for which this entry contains information. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeModuleIndex |
|
|
fcFxPortErrorFxPortIndex |
1.3.6.1.3.42.2.1.3.1.1.2 |
This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeFxPortIndex |
|
|
fcFxPortLinkFailures |
1.3.6.1.3.42.2.1.3.1.1.3 |
The number of link failures detected by this FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortSyncLosses |
1.3.6.1.3.42.2.1.3.1.1.4 |
The number of loss of synchronization detected by the
FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortSigLosses |
1.3.6.1.3.42.2.1.3.1.1.5 |
The number of loss of signal detected by the FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortPrimSeqProtoErrors |
1.3.6.1.3.42.2.1.3.1.1.6 |
The number of primitive sequence protocol errors
detected by the FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortInvalidTxWords |
1.3.6.1.3.42.2.1.3.1.1.7 |
The number of invalid transmission word detected by the
FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortInvalidCrcs |
1.3.6.1.3.42.2.1.3.1.1.8 |
The number of invalid CRC detected by this FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortDelimiterErrors |
1.3.6.1.3.42.2.1.3.1.1.9 |
The number of Delimiter Errors detected by this FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortAddressIdErrors |
1.3.6.1.3.42.2.1.3.1.1.10 |
The number of address identifier errors detected by this
FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortLinkResetIns |
1.3.6.1.3.42.2.1.3.1.1.11 |
The number of Link Reset Protocol received by this
FxPort from the attached NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortLinkResetOuts |
1.3.6.1.3.42.2.1.3.1.1.12 |
The number of Link Reset Protocol issued by this FxPort
to the attached NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortOlsIns |
1.3.6.1.3.42.2.1.3.1.1.13 |
The number of Offline Sequence received by this FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortOlsOuts |
1.3.6.1.3.42.2.1.3.1.1.14 |
The number of Offline Sequence issued by this FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC1AcctTable |
1.3.6.1.3.42.2.1.4.1 |
A table that contains, one entry for each FxPort in the
Fabric Element, Class 1 accounting information recorded
since the management agent has re-initialized. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FcFxPortC1AcctEntry |
|
fcFxPortC1AcctEntry |
1.3.6.1.3.42.2.1.4.1.1 |
An entry containing Class 1 accounting information for
each FxPort. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FcFxPortC1AcctEntry |
|
|
fcFxPortC1AcctModuleIndex |
1.3.6.1.3.42.2.1.4.1.1.1 |
This object identifies the module containing the FxPort
for which this entry contains information. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeModuleIndex |
|
|
fcFxPortC1AcctFxPortIndex |
1.3.6.1.3.42.2.1.4.1.1.2 |
This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeFxPortIndex |
|
|
fcFxPortC1InConnections |
1.3.6.1.3.42.2.1.4.1.1.3 |
The number of Class 1 connections successfully
established in which the attached NxPort is the source
of the connect-request. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC1OutConnections |
1.3.6.1.3.42.2.1.4.1.1.4 |
The number of Class 1 connections successfully
established in which the attached NxPort is the
destination of the connect-request. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC1FbsyFrames |
1.3.6.1.3.42.2.1.4.1.1.5 |
The number of F_BSY frames generated by this FxPort
against Class 1 connect-request. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC1FrjtFrames |
1.3.6.1.3.42.2.1.4.1.1.6 |
The number of F_RJT frames generated by this FxPort
against Class 1 connect-request. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC1ConnTime |
1.3.6.1.3.42.2.1.4.1.1.7 |
The cumulative time that this FxPort has been engaged in
Class 1 connection. The amount of time of each
connection is counted in octets from after a connect-
request has been accepted until the connection is
disengaged, either by an EOFdt or Link Reset. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC1InFrames |
1.3.6.1.3.42.2.1.4.1.1.8 |
The number of Class 1 frames (other than Class 1
connect-request) received by this FxPort from its
attached NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC1OutFrames |
1.3.6.1.3.42.2.1.4.1.1.9 |
The number of Class 1 frames (other than Class 1
connect-request) delivered through this FxPort to its
attached NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC1InOctets |
1.3.6.1.3.42.2.1.4.1.1.10 |
The number of Class 1 frame octets, including the frame
delimiters, received by this FxPort from its attached
NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC1OutOctets |
1.3.6.1.3.42.2.1.4.1.1.11 |
The number of Class 1 frame octets, including the frame
delimiters, delivered through this FxPort its attached
NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC1Discards |
1.3.6.1.3.42.2.1.4.1.1.12 |
The number of Class 1 frames discarded by this FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC2AcctTable |
1.3.6.1.3.42.2.1.4.2 |
A table that contains, one entry for each FxPort in the
Fabric Element, Class 2 accounting information recorded
since the management agent has re-initialized. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FcFxPortC2AcctEntry |
|
fcFxPortC2AcctEntry |
1.3.6.1.3.42.2.1.4.2.1 |
An entry containing Class 2 accounting information for
each FxPort. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FcFxPortC2AcctEntry |
|
|
fcFxPortC2AcctModuleIndex |
1.3.6.1.3.42.2.1.4.2.1.1 |
This object identifies the module containing the FxPort
for which this entry contains information. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeModuleIndex |
|
|
fcFxPortC2AcctFxPortIndex |
1.3.6.1.3.42.2.1.4.2.1.2 |
This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeFxPortIndex |
|
|
fcFxPortC2InFrames |
1.3.6.1.3.42.2.1.4.2.1.3 |
The number of Class 2 frames received by this FxPort
from its attached NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC2OutFrames |
1.3.6.1.3.42.2.1.4.2.1.4 |
The number of Class 2 frames delivered through this
FxPort to its attached NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC2InOctets |
1.3.6.1.3.42.2.1.4.2.1.5 |
The number of Class 2 frame octets, including the frame
delimiters, received by this FxPort from its attached
NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC2OutOctets |
1.3.6.1.3.42.2.1.4.2.1.6 |
The number of Class 2 frame octets, including the frame
delimiters, delivered through this FxPort to its
attached NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC2Discards |
1.3.6.1.3.42.2.1.4.2.1.7 |
The number of Class 2 frames discarded by this FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC2FbsyFrames |
1.3.6.1.3.42.2.1.4.2.1.8 |
The number of F_BSY frames generated by this FxPort
against Class 2 frames. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC2FrjtFrames |
1.3.6.1.3.42.2.1.4.2.1.9 |
The number of F_RJT frames generated by this FxPort
against Class 2 frames. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC3AcctTable |
1.3.6.1.3.42.2.1.4.3 |
A table that contains, one entry for each FxPort in the
Fabric Element, Class 3 accounting information recorded
since the management agent has re-initialized. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FcFxPortC3AcctEntry |
|
fcFxPortC3AcctEntry |
1.3.6.1.3.42.2.1.4.3.1 |
An entry containing Class 3 accounting information for
each FxPort. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FcFxPortC3AcctEntry |
|
|
fcFxPortC3AcctModuleIndex |
1.3.6.1.3.42.2.1.4.3.1.1 |
This object identifies the module containing the FxPort
for which this entry contains information. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeModuleIndex |
|
|
fcFxPortC3AcctFxPortIndex |
1.3.6.1.3.42.2.1.4.3.1.2 |
This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeFxPortIndex |
|
|
fcFxPortC3InFrames |
1.3.6.1.3.42.2.1.4.3.1.3 |
The number of Class 3 frames received by this FxPort
from its attached NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC3OutFrames |
1.3.6.1.3.42.2.1.4.3.1.4 |
The number of Class 3 frames delivered through this
FxPort to its attached NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC3InOctets |
1.3.6.1.3.42.2.1.4.3.1.5 |
The number of Class 3 frame octets, including the frame
delimiters, received by this FxPort from its attached
NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC3OutOctets |
1.3.6.1.3.42.2.1.4.3.1.6 |
The number of Class 3 frame octets, including the frame
delimiters, delivered through this FxPort to its
attached NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortC3Discards |
1.3.6.1.3.42.2.1.4.3.1.7 |
The number of Class 3 frames discarded by this FxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
fcFxPortCapTable |
1.3.6.1.3.42.2.1.5.1 |
A table that contains, one entry for each FxPort, the
capabilities of the port within the Fabric Element. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FcFxPortCapEntry |
|
fcFxPortCapEntry |
1.3.6.1.3.42.2.1.5.1.1 |
An entry containing the capabilities of a FxPort. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FcFxPortCapEntry |
|
|
fcFxPortCapModuleIndex |
1.3.6.1.3.42.2.1.5.1.1.1 |
This object identifies the module containing the FxPort
for which this entry contains information. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeModuleIndex |
|
|
fcFxPortCapFxPortIndex |
1.3.6.1.3.42.2.1.5.1.1.2 |
This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcFeFxPortIndex |
|
|
fcFxPortCapFcphVersionHigh |
1.3.6.1.3.42.2.1.5.1.1.3 |
The highest or most recent version of FC-PH that the
FxPort is capable of supporting. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcphVersion |
|
|
fcFxPortCapFcphVersionLow |
1.3.6.1.3.42.2.1.5.1.1.4 |
The lowest or earliest version of FC-PH that the FxPort
is capable of supporting. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcphVersion |
|
|
fcFxPortCapBbCreditMax |
1.3.6.1.3.42.2.1.5.1.1.5 |
The maximum number of receive buffers available for
holding Class 1 connect-request, Class 2 or Class 3
frames from the attached NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcBbCredit |
|
|
fcFxPortCapBbCreditMin |
1.3.6.1.3.42.2.1.5.1.1.6 |
The minimum number of receive buffers available for
holding Class 1 connect-request, Class 2 or Class 3
frames from the attached NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcBbCredit |
|
|
fcFxPortCapRxDataFieldSizeMax |
1.3.6.1.3.42.2.1.5.1.1.7 |
The maximum size in bytes of the Data Field in a frame
that the FxPort is capable of receiving from its
attached NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcRxDataFieldSize |
|
|
fcFxPortCapRxDataFieldSizeMin |
1.3.6.1.3.42.2.1.5.1.1.8 |
The minimum size in bytes of the Data Field in a frame
that the FxPort is capable of receiving from its
attached NxPort. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcRxDataFieldSize |
|
|
fcFxPortCapCos |
1.3.6.1.3.42.2.1.5.1.1.9 |
A value indicating the set of Classes of Service that
the FxPort is capable of supporting. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcCosCap |
|
|
fcFxPortCapIntermix |
1.3.6.1.3.42.2.1.5.1.1.10 |
A flag indicating whether or not the FxPort is capable
of supporting the intermixing of Class 2 and Class 3
frames during a Class 1 connection. This flag is only
valid if the port is capable of supporting Class 1
service. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
fcFxPortCapStackedConnMode |
1.3.6.1.3.42.2.1.5.1.1.11 |
A value indicating the mode of Stacked Connect request
that the FxPort is capable of supporting. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcStackedConnMode |
|
|
fcFxPortCapClass2SeqDeliv |
1.3.6.1.3.42.2.1.5.1.1.12 |
A flag indicating whether or not the FxPort is capable
of supporting Class 2 Sequential Delivery. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
fcFxPortCapClass3SeqDeliv |
1.3.6.1.3.42.2.1.5.1.1.13 |
A flag indicating whether or not the FxPort is capable
of supporting Class 3 Sequential Delivery. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
fcFxPortCapHoldTimeMax |
1.3.6.1.3.42.2.1.5.1.1.14 |
The maximum holding time (in microseconds) that the
FxPort is capable of supporting. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MicroSeconds |
|
|
fcFxPortCapHoldTimeMin |
1.3.6.1.3.42.2.1.5.1.1.15 |
The minimum holding time (in microseconds) that the
FxPort is capable of supporting. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MicroSeconds |
|
|
fcFxPortCapBaudRates |
1.3.6.1.3.42.2.1.5.1.1.16 |
A value indicating the set of baud rates that the FxPort
is capable of supporting. This variable has been
deprecated and may be implemented for backward
compability. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Fc0BaudRateCap |
|
|