FOUNDRY-SN-IP-MIB

File: FOUNDRY-SN-IP-MIB.mib (161450 bytes)

Imported modules

RFC1155-SMI RFC-1212 IF-MIB
FOUNDRY-SN-ROOT-MIB

Imported symbols

IpAddress Counter TimeTicks
OBJECT-TYPE InterfaceIndex snIp
snRip snDvmrp snFsrp
snGblRt snPim snVrrp
snLoopbackIf

Defined Types

DisplayString  
OCTET STRING    

RtrStatus  
INTEGER disabled(0), enabled(1)    

ClearStatus  
INTEGER normal(0), clear(1)    

RowSts  
INTEGER other(1), valid(2), delete(3), create(4)    

PortIndex  
INTEGER    

Action  
INTEGER deny(0), permit(1)    

PhysAddress  
OCTET STRING    

Metric  
INTEGER 0..65535    

PortMask  
INTEGER    

SnRtIpStaticRouteEntry  
SEQUENCE    
  snRtIpStaticRouteIndex INTEGER
  snRtIpStaticRouteDest IpAddress
  snRtIpStaticRouteMask IpAddress
  snRtIpStaticRouteNextHop IpAddress
  snRtIpStaticRouteMetric INTEGER
  snRtIpStaticRouteRowStatus RowSts
  snRtIpStaticRouteDistance INTEGER

SnRtIpFilterEntry  
SEQUENCE    
  snRtIpFilterIndex INTEGER
  snRtIpFilterAction INTEGER
  snRtIpFilterProtocol INTEGER
  snRtIpFilterSourceIp IpAddress
  snRtIpFilterSourceMask IpAddress
  snRtIpFilterDestIp IpAddress
  snRtIpFilterDestMask IpAddress
  snRtIpFilterOperator INTEGER
  snRtIpFilterOperand INTEGER
  snRtIpFilterRowStatus RowSts
  snRtIpFilterEstablished RtrStatus
  snRtIpFilterQosPriority INTEGER

SnRtIpRarpEntry  
SEQUENCE    
  snRtIpRarpIndex INTEGER
  snRtIpRarpMac OCTET STRING
  snRtIpRarpIp IpAddress
  snRtIpRarpRowStatus RowSts

SnRtStaticArpEntry  
SEQUENCE    
  snRtStaticArpIndex INTEGER
  snRtStaticArpIp IpAddress
  snRtStaticArpMac OCTET STRING
  snRtStaticArpPort PortIndex
  snRtStaticArpRowStatus RowSts

SnRtIpPortAddrEntry  
SEQUENCE    
  snRtIpPortAddrPortIndex PortIndex
  snRtIpPortAddress IpAddress
  snRtIpPortSubnetMask IpAddress
  snRtIpPortAddrType INTEGER
  snRtIpPortRowStatus RowSts

SnRtIpPortAccessEntry  
SEQUENCE    
  snRtIpPortAccessPortIndex PortIndex
  snRtIpPortAccessDirection INTEGER
  snRtIpPortAccessFilters OCTET STRING
  snRtIpPortAccessRowStatus RowSts

SnRtIpPortConfigEntry  
SEQUENCE    
  snRtIpPortConfigPortIndex PortIndex
  snRtIpPortMtu INTEGER
  snRtIpPortEncap INTEGER
  snRtIpPortMetric INTEGER
  snRtIpPortDirBcastFwd RtrStatus

SnRtIpPortIfAddrEntry  
SEQUENCE    
  snRtIpPortIfAddrInterfaceIndex InterfaceIndex
  snRtIpPortIfAddress IpAddress
  snRtIpPortIfSubnetMask IpAddress
  snRtIpPortIfAddrType INTEGER
  snRtIpPortIfRowStatus RowSts

SnRtIpPortIfAccessEntry  
SEQUENCE    
  snRtIpPortIfAccessInterfaceIndex InterfaceIndex
  snRtIpPortIfAccessDirection INTEGER
  snRtIpPortIfAccessFilters OCTET STRING
  snRtIpPortIfAccessRowStatus RowSts

SnRtIpPortIfConfigEntry  
SEQUENCE    
  snRtIpPortIfConfigInterfaceIndex InterfaceIndex
  snRtIpPortIfMtu INTEGER
  snRtIpPortIfEncap INTEGER
  snRtIpPortIfMetric INTEGER
  snRtIpPortIfDirBcastFwd RtrStatus

SnRtUdpBcastFwdPortEntry  
SEQUENCE    
  snRtUdpBcastFwdPortIndex INTEGER
  snRtUdpBcastFwdPortNumber INTEGER
  snRtUdpBcastFwdPortRowStatus RowSts

SnRtUdpHelperEntry  
SEQUENCE    
  snRtUdpHelperPortIndex PortIndex
  snRtUdpHelperIndex INTEGER
  snRtUdpHelperAddr IpAddress
  snRtUdpHelperRowStatus RowSts

SnRtIpTraceRouteResultEntry  
SEQUENCE    
  snRtIpTraceRouteResultIndex INTEGER
  snRtIpTraceRouteResultAddr IpAddress
  snRtIpTraceRouteResultRoundTripTime1 TimeTicks
  snRtIpTraceRouteResultRoundTripTime2 TimeTicks

SnRtIpFwdCacheEntry  
SEQUENCE    
  snRtIpFwdCacheIndex INTEGER
  snRtIpFwdCacheIp IpAddress
  snRtIpFwdCacheMac OCTET STRING
  snRtIpFwdCacheNextHopIp IpAddress
  snRtIpFwdCacheOutgoingPort INTEGER
  snRtIpFwdCacheType INTEGER
  snRtIpFwdCacheAction INTEGER
  snRtIpFwdCacheFragCheck INTEGER
  snRtIpFwdCacheSnapHdr INTEGER
  snRtIpFwdCacheVLanId INTEGER

SnIpAsPathAccessListEntry  
SEQUENCE    
  snIpAsPathAccessListIndex INTEGER
  snIpAsPathAccessListSequence INTEGER
  snIpAsPathAccessListAction INTEGER
  snIpAsPathAccessListRegExpression OCTET STRING
  snIpAsPathAccessListRowStatus INTEGER

SnIpCommunityListEntry  
SEQUENCE    
  snIpCommunityListIndex INTEGER
  snIpCommunityListSequence INTEGER
  snIpCommunityListAction INTEGER
  snIpCommunityListCommNum OCTET STRING
  snIpCommunityListInternet INTEGER
  snIpCommunityListNoAdvertise INTEGER
  snIpCommunityListNoExport INTEGER
  snIpCommunityListRowStatus INTEGER
  snIpCommunityListLocalAs INTEGER

SnIpPrefixListEntry  
SEQUENCE    
  snIpPrefixListName OCTET STRING
  snIpPrefixListSequence INTEGER
  snIpPrefixListDesc OCTET STRING
  snIpPrefixListAction INTEGER
  snIpPrefixListAddr IpAddress
  snIpPrefixListMask IpAddress
  snIpPrefixListGeValue INTEGER
  snIpPrefixListLeValue INTEGER
  snIpPrefixListRowStatus INTEGER

SnIpAsPathAccessListStringEntry  
SEQUENCE    
  snIpAsPathAccessListStringName DisplayString
  snIpAsPathAccessListStringSequence INTEGER
  snIpAsPathAccessListStringAction INTEGER
  snIpAsPathAccessListStringRegExpression DisplayString
  snIpAsPathAccessListStringRowStatus INTEGER

SnIpCommunityListStringEntry  
SEQUENCE    
  snIpCommunityListStringName DisplayString
  snIpCommunityListStringSequence INTEGER
  snIpCommunityListStringAction INTEGER
  snIpCommunityListStringCommNum OCTET STRING
  snIpCommunityListStringInternet INTEGER
  snIpCommunityListStringNoAdvertise INTEGER
  snIpCommunityListStringNoExport INTEGER
  snIpCommunityListStringRowStatus INTEGER
  snIpCommunityListStringLocalAs INTEGER

SnRtIpRipPortConfigEntry  
SEQUENCE    
  snRtIpRipPortConfigPortIndex PortIndex
  snRtIpRipPortVersion INTEGER
  snRtIpRipPortPoisonReverse RtrStatus
  snRtIpRipPortLearnDefault INTEGER

SnRtIpRipRedisEntry  
SEQUENCE    
  snRtIpRipRedisIndex INTEGER
  snRtIpRipRedisAction Action
  snRtIpRipRedisProtocol INTEGER
  snRtIpRipRedisIp IpAddress
  snRtIpRipRedisMask IpAddress
  snRtIpRipRedisMatchMetric Metric
  snRtIpRipRedisSetMetric INTEGER
  snRtIpRipRedisRowStatus RowSts

SnRtIpRipRouteFilterEntry  
SEQUENCE    
  snRtIpRipRouteFilterId INTEGER
  snRtIpRipRouteFilterAction Action
  snRtIpRipRouteFilterIpAddr IpAddress
  snRtIpRipRouteFilterSubnetMask IpAddress
  snRtIpRipRouteFilterRowStatus INTEGER

SnRtIpRipNbrFilterEntry  
SEQUENCE    
  snRtIpRipNbrFilterId INTEGER
  snRtIpRipNbrFilterAction Action
  snRtIpRipNbrFilterSourceIp IpAddress
  snRtIpRipNbrFilterRowStatus INTEGER

SnRtIpRipPortAccessEntry  
SEQUENCE    
  snRtIpRipPortAccessPort PortIndex
  snRtIpRipPortAccessDir INTEGER
  snRtIpRipPortAccessFilterList OCTET STRING
  snRtIpRipPortAccessRowStatus INTEGER

SnRtIpRipPortIfConfigEntry  
SEQUENCE    
  snRtIpRipPortIfConfigInterfaceIndex InterfaceIndex
  snRtIpRipPortIfVersion INTEGER
  snRtIpRipPortIfPoisonReverse RtrStatus
  snRtIpRipPortIfLearnDefault INTEGER

SnRtIpRipPortIfAccessEntry  
SEQUENCE    
  snRtIpRipPortIfAccessPort InterfaceIndex
  snRtIpRipPortIfAccessDir INTEGER
  snRtIpRipPortIfAccessFilterList OCTET STRING
  snRtIpRipPortIfAccessRowStatus INTEGER

SnDvmrpVInterfaceEntry  
SEQUENCE    
  snDvmrpVInterfaceVifIndex INTEGER
  snDvmrpVInterfaceType INTEGER
  snDvmrpVInterfaceOperState INTEGER
  snDvmrpVInterfaceLocalAddress IpAddress
  snDvmrpVInterfaceRemoteAddress IpAddress
  snDvmrpVInterfaceRemoteSubnetMask IpAddress
  snDvmrpVInterfaceMetric INTEGER
  snDvmrpVInterfaceTtlThreshold INTEGER
  snDvmrpVInterfaceAdvertiseLocal RtrStatus
  snDvmrpVInterfaceEncapsulation RtrStatus
  snDvmrpVInterfaceStatus INTEGER

SnDvmrpNeighborEntry  
SEQUENCE    
  snDvmrpNeighborEntryIndex INTEGER
  snDvmrpNeighborVifIndex INTEGER
  snDvmrpNeighborAddress IpAddress
  snDvmrpNeighborUpTime TimeTicks
  snDvmrpNeighborExpiryTime TimeTicks
  snDvmrpNeighborGenerationId INTEGER
  snDvmrpNeighborMajorVersion INTEGER
  snDvmrpNeighborMinorVersion INTEGER
  snDvmrpNeighborCapabilities INTEGER

SnDvmrpRouteEntry  
SEQUENCE    
  snDvmrpRouteEntryIndex INTEGER
  snDvmrpRouteSource IpAddress
  snDvmrpRouteSourceMask IpAddress
  snDvmrpRouteUpstreamNeighbor IpAddress
  snDvmrpRouteVifIndex INTEGER
  snDvmrpRouteMetric INTEGER
  snDvmrpRouteExpiryTime TimeTicks

SnDvmrpRouteNextHopEntry  
SEQUENCE    
  snDvmrpRouteNextHopSource IpAddress
  snDvmrpRouteNextHopSourceMask IpAddress
  snDvmrpRouteNextHopVifIndex INTEGER
  snDvmrpRouteNextHopType INTEGER

SnDvmrpVIfStatEntry  
SEQUENCE    
  snDvmrpVIfStatVifIndex INTEGER
  snDvmrpVIfStatInPkts Counter
  snDvmrpVIfStatOutPkts Counter
  snDvmrpVIfStatInOctets Counter
  snDvmrpVIfStatOutOctets Counter
  snDvmrpVIfStatInProbePkts Counter
  snDvmrpVIfStatOutProbePkts Counter
  snDvmrpVIfStatDiscardProbePkts Counter
  snDvmrpVIfStatInRtUpdatePkts Counter
  snDvmrpVIfStatOutRtUpdatePkts Counter
  snDvmrpVIfStatDiscardRtUpdatePkts Counter
  snDvmrpVIfStatInGraftPkts Counter
  snDvmrpVIfStatOutGraftPkts Counter
  snDvmrpVIfStatDiscardGraftPkts Counter
  snDvmrpVIfStatInGraftAckPkts Counter
  snDvmrpVIfStatOutGraftAckPkts Counter
  snDvmrpVIfStatDiscardGraftAckPkts Counter
  snDvmrpVIfStatInPrunePkts Counter
  snDvmrpVIfStatOutPrunePkts Counter
  snDvmrpVIfStatDiscardPrunePkts Counter

SnFsrpIfEntry  
SEQUENCE    
  snFsrpIfPort INTEGER
  snFsrpIfIpAddress IpAddress
  snFsrpIfVirRtrIpAddr IpAddress
  snFsrpIfOtherRtrIpAddr IpAddress
  snFsrpIfPreferLevel INTEGER
  snFsrpIfTrackPortMask PortMask
  snFsrpIfRowStatus INTEGER
  snFsrpIfState INTEGER
  snFsrpIfKeepAliveTime INTEGER
  snFsrpIfRouterDeadTime INTEGER
  snFsrpIfChassisTrackPortMask OCTET STRING
  snFsrpIfTrackPortList OCTET STRING

SnPimVInterfaceEntry  
SEQUENCE    
  snPimVInterfaceVifIndex INTEGER
  snPimVInterfaceType INTEGER
  snPimVInterfaceLocalAddress IpAddress
  snPimVInterfaceLocalSubnetMask IpAddress
  snPimVInterfaceRemoteAddress IpAddress
  snPimVInterfaceDR IpAddress
  snPimVInterfaceTtlThreshold INTEGER
  snPimVInterfaceStatus INTEGER
  snPimVInterfaceMode INTEGER

SnPimNeighborEntry  
SEQUENCE    
  snPimNeighborEntryIndex INTEGER
  snPimNeighborVifIndex INTEGER
  snPimNeighborAddress IpAddress
  snPimNeighborUpTime TimeTicks
  snPimNeighborExpiryTime TimeTicks

SnPimVIfStatEntry  
SEQUENCE    
  snPimVIfStatVifIndex INTEGER
  snPimVIfStatInJoinPkts Counter
  snPimVIfStatOutJoinPkts Counter
  snPimVIfStatDiscardJoinPkts Counter
  snPimVIfStatInPrunePkts Counter
  snPimVIfStatOutPrunePkts Counter
  snPimVIfStatDiscardPrunePkts Counter
  snPimVIfStatInAssertPkts Counter
  snPimVIfStatOutAssertPkts Counter
  snPimVIfStatDiscardAssertPkts Counter
  snPimVIfStatInHelloPkts Counter
  snPimVIfStatOutHelloPkts Counter
  snPimVIfStatDiscardHelloPkts Counter
  snPimVIfStatInGraftPkts Counter
  snPimVIfStatOutGraftPkts Counter
  snPimVIfStatDiscardGraftPkts Counter
  snPimVIfStatInGraftAckPkts Counter
  snPimVIfStatOutGraftAckPkts Counter
  snPimVIfStatDiscardGraftAckPkts Counter

SnPimCandidateBSR  
SEQUENCE    
  snPimCandidateBSRPortID INTEGER
  snPimCandidateBSRIPAddress IpAddress
  snPimCandidateBSRHashMaskLen INTEGER
  snPimCandidateBSRPreference INTEGER

SnPimRPSetEntry  
SEQUENCE    
  snPimRPSetGroupAddress IpAddress
  snPimRPSetMask IpAddress
  snPimRPSetIPAddress IpAddress
  snPimRPSetHoldTime INTEGER

SnPimCandidateRPEntry  
SEQUENCE    
  snPimCandidateRPGroupAddress IpAddress
  snPimCandidateRPMask IpAddress
  snPimCandidateRPIPAddress IpAddress
  snPimCandidateRPRowStatus INTEGER

SnVrrpIfEntry  
SEQUENCE    
  snVrrpIfPort INTEGER
  snVrrpIfAuthType INTEGER
  snVrrpIfAuthPassword OCTET STRING
  snVrrpIfRxHeaderErrCnts Counter
  snVrrpIfRxAuthTypeErrCnts Counter
  snVrrpIfRxAuthPwdMismatchErrCnts Counter
  snVrrpIfRxVridErrCnts Counter

SnVrrpVirRtrEntry  
SEQUENCE    
  snVrrpVirRtrPort INTEGER
  snVrrpVirRtrId INTEGER
  snVrrpVirRtrOwnership INTEGER
  snVrrpVirRtrCfgPriority INTEGER
  snVrrpVirRtrTrackPriority INTEGER
  snVrrpVirRtrCurrPriority INTEGER
  snVrrpVirRtrHelloInt INTEGER
  snVrrpVirRtrDeadInt INTEGER
  snVrrpVirRtrPreemptMode INTEGER
  snVrrpVirRtrState INTEGER
  snVrrpVirRtrActivate INTEGER
  snVrrpVirRtrIpAddrMask OCTET STRING
  snVrrpVirRtrTrackPortMask OCTET STRING
  snVrrpVirRtrTrackVifMask OCTET STRING
  snVrrpVirRtrRowStatus INTEGER
  snVrrpVirRtrRxArpPktDropCnts Counter
  snVrrpVirRtrRxIpPktDropCnts Counter
  snVrrpVirRtrRxPortMismatchCnts Counter
  snVrrpVirRtrRxNumOfIpMismatchCnts Counter
  snVrrpVirRtrRxIpMismatchCnts Counter
  snVrrpVirRtrRxHelloIntMismatchCnts Counter
  snVrrpVirRtrRxPriorityZeroFromMasterCnts Counter
  snVrrpVirRtrRxHigherPriorityCnts Counter
  snVrrpVirRtrTransToMasterStateCnts Counter
  snVrrpVirRtrTransToBackupStateCnts Counter
  snVrrpVirRtrCurrDeadInt INTEGER
  snVrrpVirRtrTrackPortList OCTET STRING
  snVrrpVirRtrTrackVifPortList OCTET STRING

SnLoopbackIntfConfigEntry  
SEQUENCE    
  snLoopbackIntfConfigPortIndex INTEGER
  snLoopbackIntfMode INTEGER
  snLoopbackIntfRowStatus INTEGER

Defined Values

snGblRtGeneral 1.3.6.1.4.1.1991.1.2.8.1
OBJECT IDENTIFIER    

snGblRtRouteOnly 1.3.6.1.4.1.1991.1.2.8.1.1
If this object is 'enabled', this switching router will only route packets. If this object is 'disabled', this switching router will first route packets. If route cannot perform, it will switch packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snRtIpGeneral 1.3.6.1.4.1.1991.1.2.2.1
OBJECT IDENTIFIER    

snRtClearArpCache 1.3.6.1.4.1.1991.1.2.2.1.1
clear(1) will clear arp cache table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ClearStatus  

snRtClearIpCache 1.3.6.1.4.1.1991.1.2.2.1.2
clear(1) will clear ip route cache table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ClearStatus  

snRtClearIpRoute 1.3.6.1.4.1.1991.1.2.2.1.3
clear(1) will clear ip route table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ClearStatus  

snRtBootpServer 1.3.6.1.4.1.1991.1.2.2.1.4
IP address of bootp server to which bootp packet need to be relayed.
Status: deprecated Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtBootpRelayMax 1.3.6.1.4.1.1991.1.2.2.1.5
Maximum number of hop the bootp packet should travel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

snRtArpAge 1.3.6.1.4.1.1991.1.2.2.1.6
The time in minutes an ARP entry can be valid without relearning. 0 - Don't not age.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..240  

snRtIpIrdpEnable 1.3.6.1.4.1.1991.1.2.2.1.7
Perform router advertisement on this box.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snRtIpLoadShare 1.3.6.1.4.1.1991.1.2.2.1.8
If more than one route available, use them to share load.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snRtIpProxyArp 1.3.6.1.4.1.1991.1.2.2.1.9
Enable/disable proxy arp function in the box.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snRtIpRarp 1.3.6.1.4.1.1991.1.2.2.1.10
Enable/disable RARP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snRtIpTtl 1.3.6.1.4.1.1991.1.2.2.1.11
The time to live value to be used in IP header of IP packet generated by the box.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

snRtIpSetAllPortConfig 1.3.6.1.4.1.1991.1.2.2.1.12
The value of this object is an index number of a snRtIpPortConfigTable row (i.e. snRtIpPortConfigPortIndex), which is the selected row to copy all of its read-writable data (i.e. snRtIpPortMtu and snRtIpPortEncap) to the rest of the rows in snRtIpPortConfigTable. Note: prior setting this object, all the intended data of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire ip interface configuration table. The previous setting will be overwritten by the new one.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

snRtIpFwdCacheMaxEntries 1.3.6.1.4.1.1991.1.2.2.1.13
The maximum number of ip forwarding table entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snRtIpFwdCacheCurEntries 1.3.6.1.4.1.1991.1.2.2.1.14
The current number of ip forwarding table entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snRtIpMaxStaticRouteEntries 1.3.6.1.4.1.1991.1.2.2.1.15
The maximum number of static route entries in the static route table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snRtIpDirBcastFwd 1.3.6.1.4.1.1991.1.2.2.1.16
Enable/Disable directed broadcast forwarding.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snRtIpLoadShareNumOfPaths 1.3.6.1.4.1.1991.1.2.2.1.17
Number of routes are used to share load.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

snRtIpLoadShareMaxPaths 1.3.6.1.4.1.1991.1.2.2.1.18
Maximum number of routes can be configured to share load.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snRtIpLoadShareMinPaths 1.3.6.1.4.1.1991.1.2.2.1.19
Minimum number of routes can be configured to share load.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snRtIpProtocolRouterId 1.3.6.1.4.1.1991.1.2.2.1.20
Router Id for all IP Protocols.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpSourceRoute 1.3.6.1.4.1.1991.1.2.2.1.21
Enable/Disable source routing support, ability to drop the source routing packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snRtIpStaticRouteTable 1.3.6.1.4.1.1991.1.2.2.2
IP static/default route table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpStaticRouteEntry

snRtIpStaticRouteEntry 1.3.6.1.4.1.1991.1.2.2.2.1
An entry in the IP static route table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtIpStaticRouteEntry  

snRtIpStaticRouteIndex 1.3.6.1.4.1.1991.1.2.2.2.1.1
The table index for a static route entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snRtIpStaticRouteDest 1.3.6.1.4.1.1991.1.2.2.2.1.2
Destination IP address. 0.0.0.0 for default route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpStaticRouteMask 1.3.6.1.4.1.1991.1.2.2.2.1.3
Subnet mask associated with the destination IP address. 0.0.0.0 for default route mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpStaticRouteNextHop 1.3.6.1.4.1.1991.1.2.2.2.1.4
IP address of next hop router that is located on one of the directly attached IP subnet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpStaticRouteMetric 1.3.6.1.4.1.1991.1.2.2.2.1.5
The metrics to next hop router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

snRtIpStaticRouteRowStatus 1.3.6.1.4.1.1991.1.2.2.2.1.6
To create or delete a static route entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowSts  

snRtIpStaticRouteDistance 1.3.6.1.4.1.1991.1.2.2.2.1.7
Administration distance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

snRtIpFilterTable 1.3.6.1.4.1.1991.1.2.2.3
IP filter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpFilterEntry

snRtIpFilterEntry 1.3.6.1.4.1.1991.1.2.2.3.1
An entry in the IP filter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtIpFilterEntry  

snRtIpFilterIndex 1.3.6.1.4.1.1991.1.2.2.3.1.1
The table index for a filter entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snRtIpFilterAction 1.3.6.1.4.1.1991.1.2.2.3.1.2
Action to take if the ip packet match with this filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER deny(0), permit(1), qosEnabled(2)  

snRtIpFilterProtocol 1.3.6.1.4.1.1991.1.2.2.3.1.3
Transport protocol. 0 means don't care
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

snRtIpFilterSourceIp 1.3.6.1.4.1.1991.1.2.2.3.1.4
Source IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpFilterSourceMask 1.3.6.1.4.1.1991.1.2.2.3.1.5
Source IP subnet mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpFilterDestIp 1.3.6.1.4.1.1991.1.2.2.3.1.6
Destination IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpFilterDestMask 1.3.6.1.4.1.1991.1.2.2.3.1.7
Destination IP subnet mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpFilterOperator 1.3.6.1.4.1.1991.1.2.2.3.1.8
Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER greater(1), equal(2), less(3), notEqual(4)  

snRtIpFilterOperand 1.3.6.1.4.1.1991.1.2.2.3.1.9
For now this only refers to transport protocol port number. 0 means NA
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

snRtIpFilterRowStatus 1.3.6.1.4.1.1991.1.2.2.3.1.10
To create or delete a filter entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowSts  

snRtIpFilterEstablished 1.3.6.1.4.1.1991.1.2.2.3.1.11
Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This additional filter only applies to TCP transport protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snRtIpFilterQosPriority 1.3.6.1.4.1.1991.1.2.2.3.1.12
The router L4 Qos Priority values are: low(0) -- low prority high(1) -- high prority. The Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)  

snRtIpRarpTable 1.3.6.1.4.1.1991.1.2.2.4
IP RARP table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpRarpEntry

snRtIpRarpEntry 1.3.6.1.4.1.1991.1.2.2.4.1
An entry in the IP Rarp table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtIpRarpEntry  

snRtIpRarpIndex 1.3.6.1.4.1.1991.1.2.2.4.1.1
The table index for a Rarp entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

snRtIpRarpMac 1.3.6.1.4.1.1991.1.2.2.4.1.2
The Mac address for a Rarp entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

snRtIpRarpIp 1.3.6.1.4.1.1991.1.2.2.4.1.3
The IP address for a Rarp entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpRarpRowStatus 1.3.6.1.4.1.1991.1.2.2.4.1.4
To create or delete a Rarp entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowSts  

snRtStaticArpTable 1.3.6.1.4.1.1991.1.2.2.5
IP static arp table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtStaticArpEntry

snRtStaticArpEntry 1.3.6.1.4.1.1991.1.2.2.5.1
An entry in the IP static arp table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtStaticArpEntry  

snRtStaticArpIndex 1.3.6.1.4.1.1991.1.2.2.5.1.1
The table index for a static arp entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

snRtStaticArpIp 1.3.6.1.4.1.1991.1.2.2.5.1.2
The IP address for a static arp entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtStaticArpMac 1.3.6.1.4.1.1991.1.2.2.5.1.3
The Mac address for a static arp entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

snRtStaticArpPort 1.3.6.1.4.1.1991.1.2.2.5.1.4
The port index for a static arp entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortIndex  

snRtStaticArpRowStatus 1.3.6.1.4.1.1991.1.2.2.5.1.5
To create or delete a Static Arp entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowSts  

snRtIpPortAddrTable 1.3.6.1.4.1.1991.1.2.2.6
IP port address table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpPortAddrEntry

snRtIpPortAddrEntry 1.3.6.1.4.1.1991.1.2.2.6.1
An entry in the IP Port Address table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SnRtIpPortAddrEntry  

snRtIpPortAddrPortIndex 1.3.6.1.4.1.1991.1.2.2.6.1.1
The port index for port address entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  PortIndex  

snRtIpPortAddress 1.3.6.1.4.1.1991.1.2.2.6.1.2
The port IP address.
Status: deprecated Access: read-only
OBJECT-TYPE    
  IpAddress  

snRtIpPortSubnetMask 1.3.6.1.4.1.1991.1.2.2.6.1.3
The port IP address subnet mask.
Status: deprecated Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpPortAddrType 1.3.6.1.4.1.1991.1.2.2.6.1.4
The port IP address type.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER primary(1), secondary(2)  

snRtIpPortRowStatus 1.3.6.1.4.1.1991.1.2.2.6.1.5
To create or delete a port address entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RowSts  

snRtIpPortAccessTable 1.3.6.1.4.1.1991.1.2.2.7
IP port access table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpPortAccessEntry

snRtIpPortAccessEntry 1.3.6.1.4.1.1991.1.2.2.7.1
An entry in the IP Port access table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SnRtIpPortAccessEntry  

snRtIpPortAccessPortIndex 1.3.6.1.4.1.1991.1.2.2.7.1.1
The port index for port access entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  PortIndex  

snRtIpPortAccessDirection 1.3.6.1.4.1.1991.1.2.2.7.1.2
The incoming or outgoing check for port access.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER in(1), out(2)  

snRtIpPortAccessFilters 1.3.6.1.4.1.1991.1.2.2.7.1.3
1st octet correspond to 1st filter number and so on.
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING  

snRtIpPortAccessRowStatus 1.3.6.1.4.1.1991.1.2.2.7.1.4
To create or delete a port access entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RowSts  

snRtIpPortConfigTable 1.3.6.1.4.1.1991.1.2.2.8
IP port Config table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpPortConfigEntry

snRtIpPortConfigEntry 1.3.6.1.4.1.1991.1.2.2.8.1
An entry in the IP Port Config table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SnRtIpPortConfigEntry  

snRtIpPortConfigPortIndex 1.3.6.1.4.1.1991.1.2.2.8.1.1
The port index for port config entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  PortIndex  

snRtIpPortMtu 1.3.6.1.4.1.1991.1.2.2.8.1.2
The maximun transfer unit.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 576..4470  

snRtIpPortEncap 1.3.6.1.4.1.1991.1.2.2.8.1.3
Data link encapsulation to be used on the IP frame transmitted on the port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER ethernet(1), snap(2), hdlc(3), ppp(4)  

snRtIpPortMetric 1.3.6.1.4.1.1991.1.2.2.8.1.4
The metric.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

snRtIpPortDirBcastFwd 1.3.6.1.4.1.1991.1.2.2.8.1.5
Enable/Disable directed broadcast forwarding on the port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RtrStatus  

snRtIpPortIfAddrTable 1.3.6.1.4.1.1991.1.2.2.18
IP port If address table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpPortIfAddrEntry

snRtIpPortIfAddrEntry 1.3.6.1.4.1.1991.1.2.2.18.1
An entry in the IP Port Address table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtIpPortIfAddrEntry  

snRtIpPortIfAddrInterfaceIndex 1.3.6.1.4.1.1991.1.2.2.18.1.1
The InterfaceIndex for port address entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

snRtIpPortIfAddress 1.3.6.1.4.1.1991.1.2.2.18.1.2
The port IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snRtIpPortIfSubnetMask 1.3.6.1.4.1.1991.1.2.2.18.1.3
The port IP address subnet mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpPortIfAddrType 1.3.6.1.4.1.1991.1.2.2.18.1.4
The port IP address type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER primary(1), secondary(2)  

snRtIpPortIfRowStatus 1.3.6.1.4.1.1991.1.2.2.18.1.5
To create or delete a port address entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowSts  

snRtIpPortIfAccessTable 1.3.6.1.4.1.1991.1.2.2.19
IP port If access table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpPortIfAccessEntry

snRtIpPortIfAccessEntry 1.3.6.1.4.1.1991.1.2.2.19.1
An entry in the IP Port access table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtIpPortIfAccessEntry  

snRtIpPortIfAccessInterfaceIndex 1.3.6.1.4.1.1991.1.2.2.19.1.1
The InterfaceIndex for port access entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

snRtIpPortIfAccessDirection 1.3.6.1.4.1.1991.1.2.2.19.1.2
The incoming or outgoing check for port access.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER in(1), out(2)  

snRtIpPortIfAccessFilters 1.3.6.1.4.1.1991.1.2.2.19.1.3
1st octet correspond to 1st filter number and so on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

snRtIpPortIfAccessRowStatus 1.3.6.1.4.1.1991.1.2.2.19.1.4
To create or delete a port access entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowSts  

snRtIpPortIfConfigTable 1.3.6.1.4.1.1991.1.2.2.20
IP port If Config table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpPortIfConfigEntry

snRtIpPortIfConfigEntry 1.3.6.1.4.1.1991.1.2.2.20.1
An entry in the IP Port Config table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtIpPortIfConfigEntry  

snRtIpPortIfConfigInterfaceIndex 1.3.6.1.4.1.1991.1.2.2.20.1.1
The If index for port config entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

snRtIpPortIfMtu 1.3.6.1.4.1.1991.1.2.2.20.1.2
The maximun transfer unit. Ethernet MTU Range: 46 to 1500 POS MTU Range: 60 to 4470 ATM MTU Range: 1500 to 9180 ATM SubIf MTU Range: 1500 to 9180 For jumbo support, MTU range could be higher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

snRtIpPortIfEncap 1.3.6.1.4.1.1991.1.2.2.20.1.3
Data link encapsulation to be used on the IP frame transmitted on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernet(1), snap(2), hdlc(3), ppp(4), other(5)  

snRtIpPortIfMetric 1.3.6.1.4.1.1991.1.2.2.20.1.4
The metric.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

snRtIpPortIfDirBcastFwd 1.3.6.1.4.1.1991.1.2.2.20.1.5
Enable/Disable directed broadcast forwarding on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snRtBcastFwd 1.3.6.1.4.1.1991.1.2.2.9
OBJECT IDENTIFIER    

snRtBcastFwdGeneral 1.3.6.1.4.1.1991.1.2.2.9.1
OBJECT IDENTIFIER    

snRtUdpBcastFwdPort 1.3.6.1.4.1.1991.1.2.2.9.2
OBJECT IDENTIFIER    

snRtUdpHelper 1.3.6.1.4.1.1991.1.2.2.9.3
OBJECT IDENTIFIER    

snRtUdpBcastFwdEnable 1.3.6.1.4.1.1991.1.2.2.9.1.1
Enable or disable UDP broadcast forwarding service. When UDP broadcast forwarding is enabled, default entries are added to the UDP broadcast forwarding port table. When it is disabled, UDP broadcast forwarding port table is flushed to empty.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snRtUdpBcastFwdPortTable 1.3.6.1.4.1.1991.1.2.2.9.2.1
This table contains a list of UDP port numbers for which forwarding UDP broadcast is enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtUdpBcastFwdPortEntry

snRtUdpBcastFwdPortEntry 1.3.6.1.4.1.1991.1.2.2.9.2.1.1
An entry of the UDP broadcast forwarding port table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtUdpBcastFwdPortEntry  

snRtUdpBcastFwdPortIndex 1.3.6.1.4.1.1991.1.2.2.9.2.1.1.1
The table index for a UDP broadcast forwarding port entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..20  

snRtUdpBcastFwdPortNumber 1.3.6.1.4.1.1991.1.2.2.9.2.1.1.2
UDP port number for which UDP broadcast forwarding is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

snRtUdpBcastFwdPortRowStatus 1.3.6.1.4.1.1991.1.2.2.9.2.1.1.3
To create or delete a UDP broadcast forwarding port entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowSts  

snRtUdpHelperTable 1.3.6.1.4.1.1991.1.2.2.9.3.1
UDP helper table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtUdpHelperEntry

snRtUdpHelperEntry 1.3.6.1.4.1.1991.1.2.2.9.3.1.1
An entry of the UDP helper table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtUdpHelperEntry  

snRtUdpHelperPortIndex 1.3.6.1.4.1.1991.1.2.2.9.3.1.1.1
The port index for a UDP helper entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortIndex  

snRtUdpHelperIndex 1.3.6.1.4.1.1991.1.2.2.9.3.1.1.2
The table index for a UDP helper entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

snRtUdpHelperAddr 1.3.6.1.4.1.1991.1.2.2.9.3.1.1.3
The UDP helper address. This is the address that UDP packets will be forwarded. It can be a helper address or a subnet broadcast address. But it cannot be 255.255.255.255 or 0.0.0.0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtUdpHelperRowStatus 1.3.6.1.4.1.1991.1.2.2.9.3.1.1.4
To create or delete a UDP helper entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowSts  

snRtIpTraceRoute 1.3.6.1.4.1.1991.1.2.2.10
OBJECT IDENTIFIER    

snRtIpTraceRouteGeneral 1.3.6.1.4.1.1991.1.2.2.10.1
OBJECT IDENTIFIER    

snRtIpTraceRouteResult 1.3.6.1.4.1.1991.1.2.2.10.2
OBJECT IDENTIFIER    

snRtIpTraceRouteTargetAddr 1.3.6.1.4.1.1991.1.2.2.10.1.1
Target IP address of which trace route is performed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpTraceRouteMinTtl 1.3.6.1.4.1.1991.1.2.2.10.1.2
Minimum TTL value carried in the first probe packet. Value 0 cannot be used for SET operations. This value is returned if traceroute is not running within the system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

snRtIpTraceRouteMaxTtl 1.3.6.1.4.1.1991.1.2.2.10.1.3
Maximum TTL value carried in the last probe packet. Value 0 cannot be used for SET operations. This value is returned if traceroute is not running within the system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

snRtIpTraceRouteTimeOut 1.3.6.1.4.1.1991.1.2.2.10.1.4
Time out period (in seconds) to wait for the response from the probe packet (i,e, the ICMP packet). Value 0 cannot be used for SET operations. This value is returned if traceroute is not running within the system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..120  

snRtIpTraceRouteControl 1.3.6.1.4.1.1991.1.2.2.10.1.5
Only 'start' and 'abort' are writable values; 'success', 'failure' and 'inProgress' are readeable (or returned) values. Writing 'start' to this object to initiate the trace route operation. snRtIpTraceRouteDestAddr must have been init- ialized before 'start' is writen. This object will return 'inProgress' after trace route operation has started. During the 'inProgress' state, writing 'abort' to this object will stop the current trace route operation. If the destination address is reached, this object returned 'success'. snRtIpTraceRouteResultTable contains the routes (and the target address) to reach the destination address. If the destination address does not reach, timeout, or ending TTL reached, 'failure' is returned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER start(1), abort(2), success(3), failure(4), inProgress(5)  

snRtIpTraceRouteResultTable 1.3.6.1.4.1.1991.1.2.2.10.2.1
Trace route result table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpTraceRouteResultEntry

snRtIpTraceRouteResultEntry 1.3.6.1.4.1.1991.1.2.2.10.2.1.1
An entry of the trace route result table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtIpTraceRouteResultEntry  

snRtIpTraceRouteResultIndex 1.3.6.1.4.1.1991.1.2.2.10.2.1.1.1
The table index for a trace route result entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snRtIpTraceRouteResultAddr 1.3.6.1.4.1.1991.1.2.2.10.2.1.1.2
The router or the target address of which forms part of the route to reach the destination address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snRtIpTraceRouteResultRoundTripTime1 1.3.6.1.4.1.1991.1.2.2.10.2.1.1.3
The round trip time between the first probe packet transmitted and the reponse ICMP packet received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

snRtIpTraceRouteResultRoundTripTime2 1.3.6.1.4.1.1991.1.2.2.10.2.1.1.4
The round trip time between the second probe packet transmitted and the reponse ICMP packet received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

snRtIpFwdCacheTable 1.3.6.1.4.1.1991.1.2.2.11
IP forwarding cache table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpFwdCacheEntry

snRtIpFwdCacheEntry 1.3.6.1.4.1.1991.1.2.2.11.1
An entry in the IP forwarding cache table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtIpFwdCacheEntry  

snRtIpFwdCacheIndex 1.3.6.1.4.1.1991.1.2.2.11.1.1
The table index for a ip forwarding cache table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snRtIpFwdCacheIp 1.3.6.1.4.1.1991.1.2.2.11.1.2
The IP address of a station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snRtIpFwdCacheMac 1.3.6.1.4.1.1991.1.2.2.11.1.3
The Mac address of an IP station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

snRtIpFwdCacheNextHopIp 1.3.6.1.4.1.1991.1.2.2.11.1.4
The next hop router IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snRtIpFwdCacheOutgoingPort 1.3.6.1.4.1.1991.1.2.2.11.1.5
The outgoing port of which packets will forward to. Return port value of zero to indicate no outgoing port associated to this entry. Non-zero value has the following meanings: The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. For virtual router interface, slot number is 15, port number is the virtual router port from 1 to 60.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3900  

snRtIpFwdCacheType 1.3.6.1.4.1.1991.1.2.2.11.1.6
The 'dynamic' or 'permanent' type for a ip forwarding cache table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(1), permanent(2)  

snRtIpFwdCacheAction 1.3.6.1.4.1.1991.1.2.2.11.1.7
The action to take.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), forward(2), forUs(3), waitForArp(4), complexFilter(5), icmpDeny(6), dropPacket(7)  

snRtIpFwdCacheFragCheck 1.3.6.1.4.1.1991.1.2.2.11.1.8
Check for fragmentation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snRtIpFwdCacheSnapHdr 1.3.6.1.4.1.1991.1.2.2.11.1.9
Apply SNAP encapsulation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snRtIpFwdCacheVLanId 1.3.6.1.4.1.1991.1.2.2.11.1.10
The VLAN ID for a ip forwarding cache table entry. Return VLAN ID value of zero to indicate no VLAN associated to this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snIpAsPathAccessListTable 1.3.6.1.4.1.1991.1.2.2.12
Ip As-Path Access List table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpAsPathAccessListEntry

snIpAsPathAccessListEntry 1.3.6.1.4.1.1991.1.2.2.12.1
An entry in the Ip As-Path Access List table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnIpAsPathAccessListEntry  

snIpAsPathAccessListIndex 1.3.6.1.4.1.1991.1.2.2.12.1.1
The table index for a filter entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snIpAsPathAccessListSequence 1.3.6.1.4.1.1991.1.2.2.12.1.2
The table sequence index for a filter entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snIpAsPathAccessListAction 1.3.6.1.4.1.1991.1.2.2.12.1.3
Action to take if the bgp address match with this filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

snIpAsPathAccessListRegExpression 1.3.6.1.4.1.1991.1.2.2.12.1.4
Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

snIpAsPathAccessListRowStatus 1.3.6.1.4.1.1991.1.2.2.12.1.5
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snIpCommunityListTable 1.3.6.1.4.1.1991.1.2.2.13
Ip Community List table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpCommunityListEntry

snIpCommunityListEntry 1.3.6.1.4.1.1991.1.2.2.13.1
An entry in the Ip Community List table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnIpCommunityListEntry  

snIpCommunityListIndex 1.3.6.1.4.1.1991.1.2.2.13.1.1
The table index for a filter entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snIpCommunityListSequence 1.3.6.1.4.1.1991.1.2.2.13.1.2
The table sequence index for a filter entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snIpCommunityListAction 1.3.6.1.4.1.1991.1.2.2.13.1.3
Action to take if the bgp address match with this filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

snIpCommunityListCommNum 1.3.6.1.4.1.1991.1.2.2.13.1.4
A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..80)  

snIpCommunityListInternet 1.3.6.1.4.1.1991.1.2.2.13.1.5
Disabled/Enabled the Internet Community.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snIpCommunityListNoAdvertise 1.3.6.1.4.1.1991.1.2.2.13.1.6
Do not advertise this route to any peer (internal or external).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

snIpCommunityListNoExport 1.3.6.1.4.1.1991.1.2.2.13.1.7
Do not advertise this route to an EBGP peer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

snIpCommunityListRowStatus 1.3.6.1.4.1.1991.1.2.2.13.1.8
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snIpCommunityListLocalAs 1.3.6.1.4.1.1991.1.2.2.13.1.9
Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

snIpPrefixListTable 1.3.6.1.4.1.1991.1.2.2.14
Ip Prefix List table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpPrefixListEntry

snIpPrefixListEntry 1.3.6.1.4.1.1991.1.2.2.14.1
An entry in the Ip As-Path Access List table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnIpPrefixListEntry  

snIpPrefixListName 1.3.6.1.4.1.1991.1.2.2.14.1.1
An octet string of the ip prefix list name, each character of the name is represented by one octet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

snIpPrefixListSequence 1.3.6.1.4.1.1991.1.2.2.14.1.2
The table sequence index for a filter entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snIpPrefixListDesc 1.3.6.1.4.1.1991.1.2.2.14.1.3
An octet string of the ip prefix list description, each character of the name is represented by one octet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..80)  

snIpPrefixListAction 1.3.6.1.4.1.1991.1.2.2.14.1.4
Action to take if the ip prefix match with this filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

snIpPrefixListAddr 1.3.6.1.4.1.1991.1.2.2.14.1.5
Prefix IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snIpPrefixListMask 1.3.6.1.4.1.1991.1.2.2.14.1.6
Prefix IP mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snIpPrefixListGeValue 1.3.6.1.4.1.1991.1.2.2.14.1.7
Greater than value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

snIpPrefixListLeValue 1.3.6.1.4.1.1991.1.2.2.14.1.8
Less than value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

snIpPrefixListRowStatus 1.3.6.1.4.1.1991.1.2.2.14.1.9
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snIpAsPathAccessListStringTable 1.3.6.1.4.1.1991.1.2.2.16
Ip As-Path Access List table, string version.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpAsPathAccessListStringEntry

snIpAsPathAccessListStringEntry 1.3.6.1.4.1.1991.1.2.2.16.1
An entry in the Ip As-Path Access List table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnIpAsPathAccessListStringEntry  

snIpAsPathAccessListStringName 1.3.6.1.4.1.1991.1.2.2.16.1.1
The table index for a filter entry, string version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

snIpAsPathAccessListStringSequence 1.3.6.1.4.1.1991.1.2.2.16.1.2
The table sequence index for a filter entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snIpAsPathAccessListStringAction 1.3.6.1.4.1.1991.1.2.2.16.1.3
Action to take if the bgp address match with this filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

snIpAsPathAccessListStringRegExpression 1.3.6.1.4.1.1991.1.2.2.16.1.4
Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..256)  

snIpAsPathAccessListStringRowStatus 1.3.6.1.4.1.1991.1.2.2.16.1.5
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snIpCommunityListStringTable 1.3.6.1.4.1.1991.1.2.2.17
Ip Community ListString table, string version.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpCommunityListStringEntry

snIpCommunityListStringEntry 1.3.6.1.4.1.1991.1.2.2.17.1
An entry in the Ip Community ListString table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnIpCommunityListStringEntry  

snIpCommunityListStringName 1.3.6.1.4.1.1991.1.2.2.17.1.1
The table index for a filter entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

snIpCommunityListStringSequence 1.3.6.1.4.1.1991.1.2.2.17.1.2
The table sequence index for a filter entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snIpCommunityListStringAction 1.3.6.1.4.1.1991.1.2.2.17.1.3
Action to take if the bgp address match with this filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

snIpCommunityListStringCommNum 1.3.6.1.4.1.1991.1.2.2.17.1.4
A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..80)  

snIpCommunityListStringInternet 1.3.6.1.4.1.1991.1.2.2.17.1.5
Disabled/Enabled the Internet Community.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snIpCommunityListStringNoAdvertise 1.3.6.1.4.1.1991.1.2.2.17.1.6
Do not advertise this route to any peer (internal or external).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

snIpCommunityListStringNoExport 1.3.6.1.4.1.1991.1.2.2.17.1.7
Do not advertise this route to an EBGP peer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

snIpCommunityListStringRowStatus 1.3.6.1.4.1.1991.1.2.2.17.1.8
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snIpCommunityListStringLocalAs 1.3.6.1.4.1.1991.1.2.2.17.1.9
Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

snRtIpRipGeneral 1.3.6.1.4.1.1991.1.2.3.1
OBJECT IDENTIFIER    

snRtIpRipEnable 1.3.6.1.4.1.1991.1.2.3.1.1
Enable/disable ip rip routing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snRtIpRipUpdateTime 1.3.6.1.4.1.1991.1.2.3.1.2
Ip rip update interval in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..21845  

snRtIpRipRedisEnable 1.3.6.1.4.1.1991.1.2.3.1.3
Enable/disable redistribution to rip.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snRtIpRipRedisDefMetric 1.3.6.1.4.1.1991.1.2.3.1.4
Default metric to be used when redistribute route to rip.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

snRtIpRipSetAllPortConfig 1.3.6.1.4.1.1991.1.2.3.1.5
The value of this object is an index number of a snRtIpRipPortConfigTable row (i.e. snRtIpRipPortConfigPortIndex), which is the selected row to copy all of its read-writable data (i.e. snRtIpRipPortVersion and snRtIpRipPortPoisonReverse) to the rest of the rows in snRtIpRipPortConfigTable. Note: prior setting this object, all the intended data of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire ip rip port configuration table. The previous setting will be overwritten by the new one.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

snRtIpRipGblFiltList 1.3.6.1.4.1.1991.1.2.3.1.6
An ip rip global filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the snRtIpRipRouteFilterTable with the corresponding filter ID number (i.e. snRtIpRipRouteFilterId) must have been created before a filter list is initialized. NULL string will be returned if there are no entries of this kind.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

snRtIpRipFiltOnAllPort 1.3.6.1.4.1.1991.1.2.3.1.7
Apply the ip rip global filter list snRtIpRipGblFiltList to all interfaces. This object is used to add all rip filter lists and delete all rip filter lists to/from all interfaces. Prior to sending this command, snRtIpRipGblFiltList must have been set to a proper filter list. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation failed, then a SET with value of (2) or (3) returns error code 'GenError'. If succeed, entries in the filter list are deleted immediately. The following values can be returned on reads: valid(1)....set operation is done and is valid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), deleteAllInBound(2), deleteAllOutBound(3), addAllInBound(4), addAllOutBound(5)  

snRtIpRipDistance 1.3.6.1.4.1.1991.1.2.3.1.8
Administration distance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

snRtIpRipPortConfigTable 1.3.6.1.4.1.1991.1.2.3.2
IP Rip port Config table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpRipPortConfigEntry

snRtIpRipPortConfigEntry 1.3.6.1.4.1.1991.1.2.3.2.1
An entry in the IP Rip Port Config table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SnRtIpRipPortConfigEntry  

snRtIpRipPortConfigPortIndex 1.3.6.1.4.1.1991.1.2.3.2.1.1
The port index for ip rip port config entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  PortIndex  

snRtIpRipPortVersion 1.3.6.1.4.1.1991.1.2.3.2.1.2
The ip rip version on this port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), v1Only(1), v2Only(2), v1CompatibleV2(3)  

snRtIpRipPortPoisonReverse 1.3.6.1.4.1.1991.1.2.3.2.1.3
Enable/disable poison reverse.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RtrStatus  

snRtIpRipPortLearnDefault 1.3.6.1.4.1.1991.1.2.3.2.1.4
Apply the RIP router protocol learn-default option to the interface. The values that can be written are: disabled(0)...deleted the learn default option. enabled(1)....enabled the learn default option.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snRtIpRipRedisTable 1.3.6.1.4.1.1991.1.2.3.3
IP Rip Redistribution table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpRipRedisEntry

snRtIpRipRedisEntry 1.3.6.1.4.1.1991.1.2.3.3.1
An entry in the IP Rip Redistribution table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtIpRipRedisEntry  

snRtIpRipRedisIndex 1.3.6.1.4.1.1991.1.2.3.3.1.1
The table index for a IP Rip Redistribution entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

snRtIpRipRedisAction 1.3.6.1.4.1.1991.1.2.3.3.1.2
The action to take when match this IP Rip Redistribution entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Action  

snRtIpRipRedisProtocol 1.3.6.1.4.1.1991.1.2.3.3.1.3
The protocol to be distributed. other(1) cannot be used for SNMP-SET.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), all(2), static(3), ospf(4), bgp(5), isis(6)  

snRtIpRipRedisIp 1.3.6.1.4.1.1991.1.2.3.3.1.4
The ip address of the ip route to be distributed. 0.0.0.0 - all routes
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpRipRedisMask 1.3.6.1.4.1.1991.1.2.3.3.1.5
The ip subnet mask of the ip route to be distributed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpRipRedisMatchMetric 1.3.6.1.4.1.1991.1.2.3.3.1.6
The metric of the route to be matched to determine the redistribution. 0 - any metric value
Status: mandatory Access: read-write
OBJECT-TYPE    
  Metric  

snRtIpRipRedisSetMetric 1.3.6.1.4.1.1991.1.2.3.3.1.7
The new metric of the route to be advertised. 0 - use the default metric.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

snRtIpRipRedisRowStatus 1.3.6.1.4.1.1991.1.2.3.3.1.8
To create or delete a Redistribution entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowSts  

snRtIpRipRouteFilterTable 1.3.6.1.4.1.1991.1.2.3.4
ip rip route filter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpRipRouteFilterEntry

snRtIpRipRouteFilterEntry 1.3.6.1.4.1.1991.1.2.3.4.1
An entry of the ip rip route filter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtIpRipRouteFilterEntry  

snRtIpRipRouteFilterId 1.3.6.1.4.1.1991.1.2.3.4.1.1
The filter ID to identify a filter entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

snRtIpRipRouteFilterAction 1.3.6.1.4.1.1991.1.2.3.4.1.2
Action to take if the ip rip packet matched with this filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Action  

snRtIpRipRouteFilterIpAddr 1.3.6.1.4.1.1991.1.2.3.4.1.3
Route IP address to compare with any route IP addresses in a ip rip packet. IP address 0.0.0.0 always compare equals to any route IP addresses in any ip rip packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpRipRouteFilterSubnetMask 1.3.6.1.4.1.1991.1.2.3.4.1.4
Subnet mask to apply to the route IP address in a ip rip packet, the result is compared to snRtIpRipRouteFilterIpAddr. If snRtIpRipRouteFilterIpAddr is 0.0.0.0, this subnet mask value is ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpRipRouteFilterRowStatus 1.3.6.1.4.1.1991.1.2.3.4.1.5
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2).....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snRtIpRipNbrFilterTable 1.3.6.1.4.1.1991.1.2.3.5
ip rip neighbor filter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpRipNbrFilterEntry

snRtIpRipNbrFilterEntry 1.3.6.1.4.1.1991.1.2.3.5.1
An entry of the ip rip neighbor filter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtIpRipNbrFilterEntry  

snRtIpRipNbrFilterId 1.3.6.1.4.1.1991.1.2.3.5.1.1
The filter ID to identify a filter entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

snRtIpRipNbrFilterAction 1.3.6.1.4.1.1991.1.2.3.5.1.2
Action to take if the ip rip packet source IP address compares equal to the source IP address in this filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Action  

snRtIpRipNbrFilterSourceIp 1.3.6.1.4.1.1991.1.2.3.5.1.3
Source IP address to compare with the source IP address in a ip rip packet. IP address 0.0.0.0 always compares equal to any source IP addresses in any ip rip packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snRtIpRipNbrFilterRowStatus 1.3.6.1.4.1.1991.1.2.3.5.1.4
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2).....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snRtIpRipPortAccessTable 1.3.6.1.4.1.1991.1.2.3.6
ip interface rip access table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpRipPortAccessEntry

snRtIpRipPortAccessEntry 1.3.6.1.4.1.1991.1.2.3.6.1
An entry of the ip interface rip access table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SnRtIpRipPortAccessEntry  

snRtIpRipPortAccessPort 1.3.6.1.4.1.1991.1.2.3.6.1.1
The ip interface to which the rip filter applies.
Status: deprecated Access: read-only
OBJECT-TYPE    
  PortIndex  

snRtIpRipPortAccessDir 1.3.6.1.4.1.1991.1.2.3.6.1.2
The access direction of incoming packet filter or outgoing packet filter.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER in(1), out(2)  

snRtIpRipPortAccessFilterList 1.3.6.1.4.1.1991.1.2.3.6.1.3
An ip rip filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the snRtIpRipRouteFilterTable with the corresponding filter ID number (i.e. snRtIpRipRouteFilterId) must have been created before a filter list is initialized.
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

snRtIpRipPortAccessRowStatus 1.3.6.1.4.1.1991.1.2.3.6.1.4
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2).....the row exists and is valid
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snRtIpRipPortIfConfigTable 1.3.6.1.4.1.1991.1.2.3.7
IP Rip port If Config table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpRipPortIfConfigEntry

snRtIpRipPortIfConfigEntry 1.3.6.1.4.1.1991.1.2.3.7.1
An entry in the IP Rip Port If Config table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtIpRipPortIfConfigEntry  

snRtIpRipPortIfConfigInterfaceIndex 1.3.6.1.4.1.1991.1.2.3.7.1.1
The If index for ip rip port config entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

snRtIpRipPortIfVersion 1.3.6.1.4.1.1991.1.2.3.7.1.2
The ip rip version on this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), v1Only(1), v2Only(2), v1CompatibleV2(3)  

snRtIpRipPortIfPoisonReverse 1.3.6.1.4.1.1991.1.2.3.7.1.3
Enable/disable poison reverse.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snRtIpRipPortIfLearnDefault 1.3.6.1.4.1.1991.1.2.3.7.1.4
Apply the RIP router protocol learn-default option to the interface. The values that can be written are: disabled(0)...deleted the learn default option. enabled(1)....enabled the learn default option.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snRtIpRipPortIfAccessTable 1.3.6.1.4.1.1991.1.2.3.8
ip interface rip access table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnRtIpRipPortIfAccessEntry

snRtIpRipPortIfAccessEntry 1.3.6.1.4.1.1991.1.2.3.8.1
An entry of the ip interface rip access table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnRtIpRipPortIfAccessEntry  

snRtIpRipPortIfAccessPort 1.3.6.1.4.1.1991.1.2.3.8.1.1
The ip interface to which the rip filter applies.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

snRtIpRipPortIfAccessDir 1.3.6.1.4.1.1991.1.2.3.8.1.2
The access direction of incoming packet filter or outgoing packet filter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER in(1), out(2)  

snRtIpRipPortIfAccessFilterList 1.3.6.1.4.1.1991.1.2.3.8.1.3
An ip rip filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the snRtIpRipRouteFilterTable with the corresponding filter ID number (i.e. snRtIpRipRouteFilterId) must have been created before a filter list is initialized.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

snRtIpRipPortIfAccessRowStatus 1.3.6.1.4.1.1991.1.2.3.8.1.4
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2).....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snDvmrpMIBObjects 1.3.6.1.4.1.1991.1.2.5.1
OBJECT IDENTIFIER    

snDvmrpVersion 1.3.6.1.4.1.1991.1.2.5.1.1
The router's DVMRP version information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

snDvmrpEnable 1.3.6.1.4.1.1991.1.2.5.1.2
Enable or disable DVMRP on this router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snDvmrpGenerationId 1.3.6.1.4.1.1991.1.2.5.1.3
The generation identifier for the routing process. This is used by neighboring routers to detect whether pruning information should be resent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snDvmrpProbeInterval 1.3.6.1.4.1.1991.1.2.5.1.4
This is the time interval at which the router sends out probe messages to discover neighbour routers. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

snDvmrpReportInterval 1.3.6.1.4.1.1991.1.2.5.1.5
This is the time interval at which the router sends out full report messages. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..2000  

snDvmrpTriggerInterval 1.3.6.1.4.1.1991.1.2.5.1.6
This is the time interval at which triggered updates are sent out. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

snDvmrpNeighborRouterTimeout 1.3.6.1.4.1.1991.1.2.5.1.7
This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 60..8000  

snDvmrpRouteExpireTime 1.3.6.1.4.1.1991.1.2.5.1.8
This is the time interval after which the route expires and becomes unreachable. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 20..4000  

snDvmrpRouteDiscardTime 1.3.6.1.4.1.1991.1.2.5.1.9
This is the time interval after which a route is discarded from the route table. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 40..8000  

snDvmrpPruneAge 1.3.6.1.4.1.1991.1.2.5.1.10
This is the duration of time for which the prune state is stored. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 20..3600  

snDvmrpGraftRetransmitTime 1.3.6.1.4.1.1991.1.2.5.1.11
This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..3600  

snDvmrpDefaultRoute 1.3.6.1.4.1.1991.1.2.5.1.12
This is the IP address of a router that is connected to one of the directly attached subnet. If a multicast route is not present on the local router, this default route will be used for multicast forwarding. snDvmrpEnable must be 'enabled' before this object is writen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snDvmrpVInterfaceTable 1.3.6.1.4.1.1991.1.2.5.1.13
The (conceptual) table listing the router's DVMRP virtual interfaces. snDvmrpEnable must be 'enabled' before this table is read or writen.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnDvmrpVInterfaceEntry

snDvmrpVInterfaceEntry 1.3.6.1.4.1.1991.1.2.5.1.13.1
An entry (conceptual row) in the snDvmrpVInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnDvmrpVInterfaceEntry  

snDvmrpVInterfaceVifIndex 1.3.6.1.4.1.1991.1.2.5.1.13.1.1
The ifIndex value of this DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

snDvmrpVInterfaceType 1.3.6.1.4.1.1991.1.2.5.1.13.1.2
The type of this DVMRP virtual interface, whether it uses a tunnel, a physical interface for which we are a querier, or a physical interface for which we are not a querier. For write operation, this object can only accept tunnel(1) to configure a tunnel interface or subnet(3) to configure a physical interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tunnel(1), querier(2), subnet(3)  

snDvmrpVInterfaceOperState 1.3.6.1.4.1.1991.1.2.5.1.13.1.3
The current operational state of this DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

snDvmrpVInterfaceLocalAddress 1.3.6.1.4.1.1991.1.2.5.1.13.1.4
The IP address of the local end of this DVMRP virtual interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snDvmrpVInterfaceRemoteAddress 1.3.6.1.4.1.1991.1.2.5.1.13.1.5
The IP address of the remote end of this DVMRP virtual interface. For a tunnel, this is the IP address of the neighboring router. For a subnet, this is the subnet address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snDvmrpVInterfaceRemoteSubnetMask 1.3.6.1.4.1.1991.1.2.5.1.13.1.6
The subnet mask for a directly connected subnet. For a tunnel, this should be 0.0.0.0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snDvmrpVInterfaceMetric 1.3.6.1.4.1.1991.1.2.5.1.13.1.7
The distance metric for this DVMRP virtual interface which is used to calculate distance vectors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..31  

snDvmrpVInterfaceTtlThreshold 1.3.6.1.4.1.1991.1.2.5.1.13.1.8
This is the minimum time-to-live value to forward the packets out of this virtual interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..254  

snDvmrpVInterfaceAdvertiseLocal 1.3.6.1.4.1.1991.1.2.5.1.13.1.9
Enable or disable the advertising of this local route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snDvmrpVInterfaceEncapsulation 1.3.6.1.4.1.1991.1.2.5.1.13.1.10
Enable or disable the encapsulation of the DVMRP control packets when using IPINIP encapsulation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snDvmrpVInterfaceStatus 1.3.6.1.4.1.1991.1.2.5.1.13.1.11
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2)....Setting it to 'valid' has the effect of changing the row to operative.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snDvmrpNeighborTable 1.3.6.1.4.1.1991.1.2.5.1.14
The (conceptual) table listing the router's DVMRP neighbors, as discovered by receiving Neighbor Probe messages. snDvmrpEnable must be 'enabled' before this table is read.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnDvmrpNeighborEntry

snDvmrpNeighborEntry 1.3.6.1.4.1.1991.1.2.5.1.14.1
An entry (conceptual row) in the snDvmrpNeighborTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnDvmrpNeighborEntry  

snDvmrpNeighborEntryIndex 1.3.6.1.4.1.1991.1.2.5.1.14.1.1
The table entry index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snDvmrpNeighborVifIndex 1.3.6.1.4.1.1991.1.2.5.1.14.1.2
The value of VifIndex for the virtual interface used to reach this DVMRP neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snDvmrpNeighborAddress 1.3.6.1.4.1.1991.1.2.5.1.14.1.3
The IP address of the DVMRP neighbor for which this entry contains information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snDvmrpNeighborUpTime 1.3.6.1.4.1.1991.1.2.5.1.14.1.4
The time since this DVMRP neighbor (last) became a neighbor of the local router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

snDvmrpNeighborExpiryTime 1.3.6.1.4.1.1991.1.2.5.1.14.1.5
The minimum time remaining before this DVMRP neighbor will be aged out.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

snDvmrpNeighborGenerationId 1.3.6.1.4.1.1991.1.2.5.1.14.1.6
The neighboring router's generation identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snDvmrpNeighborMajorVersion 1.3.6.1.4.1.1991.1.2.5.1.14.1.7
The neighboring router's major DVMRP version number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

snDvmrpNeighborMinorVersion 1.3.6.1.4.1.1991.1.2.5.1.14.1.8
The neighboring router's minor DVMRP version number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

snDvmrpNeighborCapabilities 1.3.6.1.4.1.1991.1.2.5.1.14.1.9
This object describes the neighboring router's capabilities. The following shows the position of each bit: bit position meaning ----------- ------ 3 mtrace bit 2 generationID bit 1 prune bit 0 leaf bit The leaf bit indicates that the neighbor has only one interface with neighbors. The prune bit indicates that the neighbor supports pruning. The generationID bit indicates that the neighbor sends its generationID in Probe messages. The mtrace bit indicates that the neighbor can handle mtrace requests.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snDvmrpRouteTable 1.3.6.1.4.1.1991.1.2.5.1.15
The routing table used by DVMRP in place of the unicast routing table. snDvmrpEnable must be 'enabled' before this table is read.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnDvmrpRouteEntry

snDvmrpRouteEntry 1.3.6.1.4.1.1991.1.2.5.1.15.1
An entry (conceptual row) containing the multicast routing information used by DVMRP in place of the unicast routing information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnDvmrpRouteEntry  

snDvmrpRouteEntryIndex 1.3.6.1.4.1.1991.1.2.5.1.15.1.1
The table entry index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snDvmrpRouteSource 1.3.6.1.4.1.1991.1.2.5.1.15.1.2
The network address which when combined with the corresponding value of snDvmrpRouteSourceMask identifies the sources for which this entry contains multicast routing information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snDvmrpRouteSourceMask 1.3.6.1.4.1.1991.1.2.5.1.15.1.3
The network mask which when combined with the corresponding value of snDvmrpRouteSource identifies the sources for which this entry contains multicast routing information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snDvmrpRouteUpstreamNeighbor 1.3.6.1.4.1.1991.1.2.5.1.15.1.4
The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources are received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snDvmrpRouteVifIndex 1.3.6.1.4.1.1991.1.2.5.1.15.1.5
The value of snDvmrpVInterfaceVifIndex for the virtual interface on which IP datagrams sent by these sources are received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snDvmrpRouteMetric 1.3.6.1.4.1.1991.1.2.5.1.15.1.6
The distance in hops to the source subnet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snDvmrpRouteExpiryTime 1.3.6.1.4.1.1991.1.2.5.1.15.1.7
The minimum amount of time remaining before this entry will be aged out.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

snDvmrpRouteNextHopTable 1.3.6.1.4.1.1991.1.2.5.1.16
The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams. snDvmrpEnable must be 'enabled' before this table is read.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnDvmrpRouteNextHopEntry

snDvmrpRouteNextHopEntry 1.3.6.1.4.1.1991.1.2.5.1.16.1
An entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources are routed.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnDvmrpRouteNextHopEntry  

snDvmrpRouteNextHopSource 1.3.6.1.4.1.1991.1.2.5.1.16.1.1
The network address which when combined with the corresponding value of snDvmrpRouteNextHopSourceMask identifies the sources for which this entry specifies a next hop on an outgoing interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snDvmrpRouteNextHopSourceMask 1.3.6.1.4.1.1991.1.2.5.1.16.1.2
The network mask which when combined with the corresponding value of snDvmrpRouteNextHopSource identifies the sources for which this entry specifies a next hop on an outgoing interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snDvmrpRouteNextHopVifIndex 1.3.6.1.4.1.1991.1.2.5.1.16.1.3
The snDvmrpVInterfaceVifIndex value of the virtual interface for the outgoing interface for this next hop.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snDvmrpRouteNextHopType 1.3.6.1.4.1.1991.1.2.5.1.16.1.4
Type is leaf if no neighbors exist on the outgoing virtual interface. Otherwise, type is branch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER leaf(1), branch(2)  

snDvmrpVIfStatTable 1.3.6.1.4.1.1991.1.2.5.1.17
The (conceptual) table listing the router's DVMRP virtual interface statistical counters. snDvmrpEnable must be 'enabled' before this table is read.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnDvmrpVIfStatEntry

snDvmrpVIfStatEntry 1.3.6.1.4.1.1991.1.2.5.1.17.1
An entry (conceptual row) in the snDvmrpVIfStatTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnDvmrpVIfStatEntry  

snDvmrpVIfStatVifIndex 1.3.6.1.4.1.1991.1.2.5.1.17.1.1
The ifIndex value of this DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

snDvmrpVIfStatInPkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.2
The number of packets that have arrived on the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatOutPkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.3
The number of packets that have been sent on the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatInOctets 1.3.6.1.4.1.1991.1.2.5.1.17.1.4
The number of octets that have arrived on the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatOutOctets 1.3.6.1.4.1.1991.1.2.5.1.17.1.5
The number of octets that have been sent on the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatInProbePkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.6
The number of probe packets that have arrived on the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatOutProbePkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.7
The number of probe packets that have been sent on the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatDiscardProbePkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.8
The number of probe packets that have been discarded by the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatInRtUpdatePkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.9
The number of route update packets that have arrived on the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatOutRtUpdatePkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.10
The number of route update packets that have been sent on the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatDiscardRtUpdatePkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.11
The number of route update packets that have been discarded by the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatInGraftPkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.12
The number of graft packets that have arrived on the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatOutGraftPkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.13
The number of graft packets that have been sent on the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatDiscardGraftPkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.14
The number of graft packets that have been discarded by the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatInGraftAckPkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.15
The number of graft acknowledge packets that have arrived on the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatOutGraftAckPkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.16
The number of graft acknowledge packets that have been sent on the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatDiscardGraftAckPkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.17
The number of graft acknowledge packets that have been discarded by the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatInPrunePkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.18
The number of prune packets that have arrived on the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatOutPrunePkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.19
The number of prune packets that have been sent on the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snDvmrpVIfStatDiscardPrunePkts 1.3.6.1.4.1.1991.1.2.5.1.17.1.20
The number of prune packets that have been discarded by the DVMRP virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snFsrpGlobal 1.3.6.1.4.1.1991.1.2.7.1
OBJECT IDENTIFIER    

snFsrpIntf 1.3.6.1.4.1.1991.1.2.7.2
OBJECT IDENTIFIER    

snFsrpGroupOperMode 1.3.6.1.4.1.1991.1.2.7.1.1
The FSRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable FSRP enabled(1)...........activate FSRP
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snFsrpIfStateChangeTrap 1.3.6.1.4.1.1991.1.2.7.1.2
Indicates whether the SNMP agent process is permitted to generate FSRP interface state change traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snFsrpIfTable 1.3.6.1.4.1.1991.1.2.7.2.1
The FSRP Interface Table describes the interfaces from the viewpoint of FSRP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnFsrpIfEntry

snFsrpIfEntry 1.3.6.1.4.1.1991.1.2.7.2.1.1
The FSRP Interface Entry describes one interface from the viewpoint of FSRP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnFsrpIfEntry  

snFsrpIfPort 1.3.6.1.4.1.1991.1.2.7.2.1.1.1
The physical router port of this FSRP interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snFsrpIfIpAddress 1.3.6.1.4.1.1991.1.2.7.2.1.1.2
The IP Address of the physical router port of this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snFsrpIfVirRtrIpAddr 1.3.6.1.4.1.1991.1.2.7.2.1.1.3
The IP Address of the Virtual Router for the interface. The Virtual Router IP address need to be configured on the interface before Redundant Router Function can operate on the interface. This address has to be same on all the routers that going to participate in the Redundant Router Function on a given subnet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snFsrpIfOtherRtrIpAddr 1.3.6.1.4.1.1991.1.2.7.2.1.1.4
The IP Address of the Other Router on this ip subnet that operates FSRP and to whom the Keep Alive message need to be sent by this router. This object must be configured for FSRP to work correctly
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snFsrpIfPreferLevel 1.3.6.1.4.1.1991.1.2.7.2.1.1.5
The higher the number the higher the priority is. This parameter decides which router should becomes the Active Router for the interface. A Router with higher priority selected to becomes the Active Router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

snFsrpIfTrackPortMask 1.3.6.1.4.1.1991.1.2.7.2.1.1.6
This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Standalone router FSRP Track port membership (Not used for Chassis Product)
Status: deprecated Access: read-write
OBJECT-TYPE    
  PortMask  

snFsrpIfRowStatus 1.3.6.1.4.1.1991.1.2.7.2.1.1.7
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snFsrpIfState 1.3.6.1.4.1.1991.1.2.7.2.1.1.8
This object specifies the FSRP Router's interface state as: init(0)...initialization state. negotiating(1)...negotiating state. standby(2)...standby state. active(3)...active state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER init(0), negotiating(1), standby(2), active(3)  

snFsrpIfKeepAliveTime 1.3.6.1.4.1.1991.1.2.7.2.1.1.9
The heart-beat is from 1 to 120 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..120  

snFsrpIfRouterDeadTime 1.3.6.1.4.1.1991.1.2.7.2.1.1.10
The hold time of the Fsrp router is from 3 to 255 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 3..255  

snFsrpIfChassisTrackPortMask 1.3.6.1.4.1.1991.1.2.7.2.1.1.11
This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis router FSRP Track port membership. (It was obsoleted after release 07100, replaced by snFsrpIfTrackPortList)
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(32)  

snFsrpIfTrackPortList 1.3.6.1.4.1.1991.1.2.7.2.1.1.12
This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router FSRP physical track port membership.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

snPimMIBObjects 1.3.6.1.4.1.1991.1.2.9.1
OBJECT IDENTIFIER    

snPimSMMIBObjects 1.3.6.1.4.1.1991.1.2.9.2
OBJECT IDENTIFIER    

snPimEnable 1.3.6.1.4.1.1991.1.2.9.1.1
Enable or disable PIM on this router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snPimNeighborRouterTimeout 1.3.6.1.4.1.1991.1.2.9.1.2
This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 60..8000  

snPimHelloTime 1.3.6.1.4.1.1991.1.2.9.1.3
This is the interval at which hello message is sent out an interface to the neighbouring router. This is used to detect the presence or abscense of a neighbouring router. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..3600  

snPimPruneTime 1.3.6.1.4.1.1991.1.2.9.1.4
This is the duration of time for which the prune state is stored. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..3600  

snPimGraftRetransmitTime 1.3.6.1.4.1.1991.1.2.9.1.5
This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..3600  

snPimInactivityTime 1.3.6.1.4.1.1991.1.2.9.1.6
This is the interval after which the forwarding entry is deleted. When a packet is received for a group entry, this time is reset. This is used to only keep the forwarding entries for the active sessions. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..3600  

snPimVInterfaceTable 1.3.6.1.4.1.1991.1.2.9.1.7
The (conceptual) table listing the router's PIM virtual interfaces. snPimEnable must be 'enabled' before this table is read or writen.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnPimVInterfaceEntry

snPimVInterfaceEntry 1.3.6.1.4.1.1991.1.2.9.1.7.1
An entry (conceptual row) in the snPimVInterfaceTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnPimVInterfaceEntry  

snPimVInterfaceVifIndex 1.3.6.1.4.1.1991.1.2.9.1.7.1.1
The ifIndex value of this PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

snPimVInterfaceType 1.3.6.1.4.1.1991.1.2.9.1.7.1.2
The type of PIM virtual interface, whether it uses a tunnel or a physical interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tunnel(1), subnet(2)  

snPimVInterfaceLocalAddress 1.3.6.1.4.1.1991.1.2.9.1.7.1.3
The IP address of the local end of this PIM virtual interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snPimVInterfaceLocalSubnetMask 1.3.6.1.4.1.1991.1.2.9.1.7.1.4
The network mask for the IP address of the PIM virtual interface. For a tunnel, this should be 0.0.0.0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snPimVInterfaceRemoteAddress 1.3.6.1.4.1.1991.1.2.9.1.7.1.5
The IP address of the remote end of this PIM virtual interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snPimVInterfaceDR 1.3.6.1.4.1.1991.1.2.9.1.7.1.6
The Designated Router on this PIM virtual interface. For point-to-point interfaces, this object has the value 0.0.0.0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snPimVInterfaceTtlThreshold 1.3.6.1.4.1.1991.1.2.9.1.7.1.7
This is the minimum time-to-live value to forward the packets out of this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..31  

snPimVInterfaceStatus 1.3.6.1.4.1.1991.1.2.9.1.7.1.8
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2)....Setting it to 'valid' has the effect of changing the row to operative.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snPimVInterfaceMode 1.3.6.1.4.1.1991.1.2.9.1.7.1.9
The configured mode of this PIM interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dense(1), sparse(2)  

snPimNeighborTable 1.3.6.1.4.1.1991.1.2.9.1.8
The (conceptual) table listing the router's PIM neighbors. snPimEnable must be 'enabled' before this table is read.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnPimNeighborEntry

snPimNeighborEntry 1.3.6.1.4.1.1991.1.2.9.1.8.1
An entry (conceptual row) in the snPimNeighborTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnPimNeighborEntry  

snPimNeighborEntryIndex 1.3.6.1.4.1.1991.1.2.9.1.8.1.1
The table entry index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snPimNeighborVifIndex 1.3.6.1.4.1.1991.1.2.9.1.8.1.2
The value of VifIndex for the virtual interface used to reach this PIM neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snPimNeighborAddress 1.3.6.1.4.1.1991.1.2.9.1.8.1.3
The IP address of the PIM neighbor for which this entry contains information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snPimNeighborUpTime 1.3.6.1.4.1.1991.1.2.9.1.8.1.4
The time since this PIM neighbor (last) became a neighbor of the local router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

snPimNeighborExpiryTime 1.3.6.1.4.1.1991.1.2.9.1.8.1.5
The minimum time remaining before this PIM neighbor will be aged out.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

snPimVIfStatTable 1.3.6.1.4.1.1991.1.2.9.1.9
The (conceptual) table listing the router's PIM virtual interface statistical counters. snPimEnable must be 'enabled' before this table is read.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnPimVIfStatEntry

snPimVIfStatEntry 1.3.6.1.4.1.1991.1.2.9.1.9.1
An entry (conceptual row) in the snPimVIfStatTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnPimVIfStatEntry  

snPimVIfStatVifIndex 1.3.6.1.4.1.1991.1.2.9.1.9.1.1
The ifIndex value of this PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

snPimVIfStatInJoinPkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.2
The number of join packets that have arrived on the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatOutJoinPkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.3
The number of join packets that have been sent on the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatDiscardJoinPkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.4
The number of join packets that have been discarded by the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatInPrunePkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.5
The number of prune packets that have arrived on the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatOutPrunePkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.6
The number of prune packets that have been sent on the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatDiscardPrunePkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.7
The number of prune packets that have been discarded by the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatInAssertPkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.8
The number of assert packets that have arrived on the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatOutAssertPkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.9
The number of assert packets that have been sent on the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatDiscardAssertPkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.10
The number of assert packets that have been discarded by the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatInHelloPkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.11
The number of hello packets that have arrived on the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatOutHelloPkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.12
The number of hello packets that have been sent on the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatDiscardHelloPkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.13
The number of hello packets that have been discarded by the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatInGraftPkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.14
The number of graft packets that have arrived on the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatOutGraftPkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.15
The number of graft packets that have been sent on the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatDiscardGraftPkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.16
The number of graft packets that have been discarded by the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatInGraftAckPkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.17
The number of graft acknowledge packets that have arrived on the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatOutGraftAckPkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.18
The number of graft acknowledge packets that have been sent on the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimVIfStatDiscardGraftAckPkts 1.3.6.1.4.1.1991.1.2.9.1.9.1.19
The number of graft acknowledge packets that have been discarded by the PIM virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snPimJoinPruneInterval 1.3.6.1.4.1.1991.1.2.9.2.1
The default interval in seconds at which periodic PIM-SM Join/Prune messages are to be sent. snPimEnable must be 'enabled' before this table is read or writen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..3600  

snPimCandidateBSRTable 1.3.6.1.4.1.1991.1.2.9.2.2
Candidate Bootstrap Router information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnPimCandidateBSR

snPimCandidateBSREntry 1.3.6.1.4.1.1991.1.2.9.2.2.1
An entry (conceptual row) in the snPimCandidateBSRTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnPimCandidateBSR  

snPimCandidateBSRPortID 1.3.6.1.4.1.1991.1.2.9.2.2.1.1
The IP address of the PIM interface. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

snPimCandidateBSRIPAddress 1.3.6.1.4.1.1991.1.2.9.2.2.1.2
The (unicast) address of the Candidate BSR.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snPimCandidateBSRHashMaskLen 1.3.6.1.4.1.1991.1.2.9.2.2.1.3
The hash mask value for this router as a candidate bootstrap router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

snPimCandidateBSRPreference 1.3.6.1.4.1.1991.1.2.9.2.2.1.4
The preference value for this router as a candidate bootstrap router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

snPimRPSetTable 1.3.6.1.4.1.1991.1.2.9.2.3
The (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IP multicast groups. When the local router is the BSR, this information is obtained from received Candidate-RP-Advertisements. When the local router is not the BSR, this information is obtained from received RP-Set messages. snPimEnable must be 'enabled' before this table is read or writen.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnPimRPSetEntry

snPimRPSetEntry 1.3.6.1.4.1.1991.1.2.9.2.3.1
An entry (conceptual row) in the snPimRPSetTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnPimRPSetEntry  

snPimRPSetGroupAddress 1.3.6.1.4.1.1991.1.2.9.2.3.1.1
The IP multicast group address which, when combined with snPimRPSetGroupMask, gives the group prefix for which this entry contains information about the Candidate-RP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snPimRPSetMask 1.3.6.1.4.1.1991.1.2.9.2.3.1.2
The multicast group address mask which, when combined with snPimRPSetGroupAddress, gives the group prefix for which this entry contains information about the Candidate-RP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snPimRPSetIPAddress 1.3.6.1.4.1.1991.1.2.9.2.3.1.3
The IP address of the Candidate-RP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snPimRPSetHoldTime 1.3.6.1.4.1.1991.1.2.9.2.3.1.4
The holdtime, in seconds, of a Candidate-RP. If the local router is not the BSR, this value is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

snPimCandidateRPTable 1.3.6.1.4.1.1991.1.2.9.2.4
The (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP. If this table is empty, then the local router will advertise itself as a Candidate-RP for all groups snPimEnable must be 'enabled' before this table is read or writen.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnPimCandidateRPEntry

snPimCandidateRPEntry 1.3.6.1.4.1.1991.1.2.9.2.4.1
An entry (conceptual row) in the snPimCandidateRPTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnPimCandidateRPEntry  

snPimCandidateRPGroupAddress 1.3.6.1.4.1.1991.1.2.9.2.4.1.1
The IP multicast group address which, when combined with snPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snPimCandidateRPMask 1.3.6.1.4.1.1991.1.2.9.2.4.1.2
The multicast group address mask which, when combined with snPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snPimCandidateRPIPAddress 1.3.6.1.4.1.1991.1.2.9.2.4.1.3
The (unicast) address of the interface which will be advertised as a Candidate-RP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snPimCandidateRPRowStatus 1.3.6.1.4.1.1991.1.2.9.2.4.1.4
The status of this row, by which new entries may be created, or old entries deleted from this table. This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noSuch(0), other(1), valid(2), delete(3), create(4), modify(5)  

snVrrpGlobal 1.3.6.1.4.1.1991.1.2.12.1
OBJECT IDENTIFIER    

snVrrpIntf 1.3.6.1.4.1.1991.1.2.12.2
OBJECT IDENTIFIER    

snVrrpVirRtr 1.3.6.1.4.1.1991.1.2.12.3
OBJECT IDENTIFIER    

snVrrpGroupOperMode 1.3.6.1.4.1.1991.1.2.12.1.1
The VRRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP enabled(1)...........activate VRRP
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snVrrpIfStateChangeTrap 1.3.6.1.4.1.1991.1.2.12.1.2
Indicates whether the SNMP agent process is permitted to generate VRRP interface state change traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snVrrpIfMaxNumVridPerIntf 1.3.6.1.4.1.1991.1.2.12.1.3
Indicates the maximum number of VRID per interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snVrrpIfMaxNumVridPerSystem 1.3.6.1.4.1.1991.1.2.12.1.4
Indicates the maximum number of VRID per system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snVrrpClearVrrpStat 1.3.6.1.4.1.1991.1.2.12.1.5
Clear VRRP statistics command.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), clear(1)  

snVrrpIfTable 1.3.6.1.4.1.1991.1.2.12.2.1
The VRRP Interface Table describes the interfaces from the viewpoint of VRRP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnVrrpIfEntry

snVrrpIfEntry 1.3.6.1.4.1.1991.1.2.12.2.1.1
The VRRP Interface Entry describes one interface from the viewpoint of VRRP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnVrrpIfEntry  

snVrrpIfPort 1.3.6.1.4.1.1991.1.2.12.2.1.1.1
The IP port of this VRRP interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snVrrpIfAuthType 1.3.6.1.4.1.1991.1.2.12.2.1.1.2
The authentication type of this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAuth(0), simpleTextPasswd(1), ipAuthHeader(2)  

snVrrpIfAuthPassword 1.3.6.1.4.1.1991.1.2.12.2.1.1.3
The simple text password is allowed if only if the snVrrpIfAuthType type is simpleTextPasswd(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

snVrrpIfRxHeaderErrCnts 1.3.6.1.4.1.1991.1.2.12.2.1.1.4
The received Header error counts in this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snVrrpIfRxAuthTypeErrCnts 1.3.6.1.4.1.1991.1.2.12.2.1.1.5
The received authentication type error counts in this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snVrrpIfRxAuthPwdMismatchErrCnts 1.3.6.1.4.1.1991.1.2.12.2.1.1.6
The received authentication password mismatched error counts in this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snVrrpIfRxVridErrCnts 1.3.6.1.4.1.1991.1.2.12.2.1.1.7
The received unfound VRID error counts in this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snVrrpVirRtrTable 1.3.6.1.4.1.1991.1.2.12.3.1
The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnVrrpVirRtrEntry

snVrrpVirRtrEntry 1.3.6.1.4.1.1991.1.2.12.3.1.1
The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnVrrpVirRtrEntry  

snVrrpVirRtrPort 1.3.6.1.4.1.1991.1.2.12.3.1.1.1
The IP port of this VRRP interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snVrrpVirRtrId 1.3.6.1.4.1.1991.1.2.12.3.1.1.2
One of the virtual router ID of this VRRP interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

snVrrpVirRtrOwnership 1.3.6.1.4.1.1991.1.2.12.3.1.1.3
The ownership of this VRRP router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this VRRP router interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER incomplete(0), owner(1), backup(2)  

snVrrpVirRtrCfgPriority 1.3.6.1.4.1.1991.1.2.12.3.1.1.4
The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Router. Therefore, this Object can be set if only if snVrrpVirRtrOwnership is set to backup(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 3..254  

snVrrpVirRtrTrackPriority 1.3.6.1.4.1.1991.1.2.12.3.1.1.5
The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..254  

snVrrpVirRtrCurrPriority 1.3.6.1.4.1.1991.1.2.12.3.1.1.6
The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

snVrrpVirRtrHelloInt 1.3.6.1.4.1.1991.1.2.12.3.1.1.7
Time interval between advertisements (seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..84  

snVrrpVirRtrDeadInt 1.3.6.1.4.1.1991.1.2.12.3.1.1.8
Dead interval (seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..84  

snVrrpVirRtrPreemptMode 1.3.6.1.4.1.1991.1.2.12.3.1.1.9
This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snVrrpVirRtrState 1.3.6.1.4.1.1991.1.2.12.3.1.1.10
This object specifies the VRRP Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER init(0), master(1), backup(2)  

snVrrpVirRtrActivate 1.3.6.1.4.1.1991.1.2.12.3.1.1.11
This object specifies the VRRP Router's activate command as: disabled(0)...deactivate this VRRP Router. enabled(1)....activate this VRRP Router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snVrrpVirRtrIpAddrMask 1.3.6.1.4.1.1991.1.2.12.3.1.1.12
The numbers of IP Addresses of this virtual router of this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(64)  

snVrrpVirRtrTrackPortMask 1.3.6.1.4.1.1991.1.2.12.3.1.1.13
This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership. The size of the OCTET STRING for Chassis is 32. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackPortList)
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4..32)  

snVrrpVirRtrTrackVifMask 1.3.6.1.4.1.1991.1.2.12.3.1.1.14
This object specifies the identity of the virtual interface whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership The size of the OCTET STRING for Chassis is 8. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackVifPortList)
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4..512)  

snVrrpVirRtrRowStatus 1.3.6.1.4.1.1991.1.2.12.3.1.1.15
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an existing row VirRtr the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snVrrpVirRtrRxArpPktDropCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.16
The received VRRP ARP Packet Drop Counts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snVrrpVirRtrRxIpPktDropCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.17
The received VRRP IP Packet Drop Counts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snVrrpVirRtrRxPortMismatchCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.18
The received VRRP Port mismatching Counts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snVrrpVirRtrRxNumOfIpMismatchCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.19
The received VRRP Number of IP Addresses mismatching Counts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snVrrpVirRtrRxIpMismatchCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.20
The received VRRP IP Address mismatching Counts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snVrrpVirRtrRxHelloIntMismatchCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.21
The counts of the virtual router interface with hello interval mismatch counts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snVrrpVirRtrRxPriorityZeroFromMasterCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.22
The counts of the virtual router interface with Priority zero from the master.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snVrrpVirRtrRxHigherPriorityCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.23
The counts of the virtual router interface with higher Priority.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snVrrpVirRtrTransToMasterStateCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.24
The counts of the virtual router interface transition to master state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snVrrpVirRtrTransToBackupStateCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.25
The counts of the virtual router interface transition to backup state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snVrrpVirRtrCurrDeadInt 1.3.6.1.4.1.1991.1.2.12.3.1.1.26
Current Dead interval (in 100 milliseconds).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snVrrpVirRtrTrackPortList 1.3.6.1.4.1.1991.1.2.12.3.1.1.27
This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP physical track port membership.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

snVrrpVirRtrTrackVifPortList 1.3.6.1.4.1.1991.1.2.12.3.1.1.28
This object specifies the identity of the virtual interface whose state is to be monitored. Each port index is a 16-bit integer in big endian order. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP virtual port track membership.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

snLoopbackIntfConfigTable 1.3.6.1.4.1.1991.1.2.13.1
Loopback Interface Config table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnLoopbackIntfConfigEntry

snLoopbackIntfConfigEntry 1.3.6.1.4.1.1991.1.2.13.1.1
An entry in the Loopback Interface Config table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnLoopbackIntfConfigEntry  

snLoopbackIntfConfigPortIndex 1.3.6.1.4.1.1991.1.2.13.1.1.1
The port index for Loopback Interface config entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

snLoopbackIntfMode 1.3.6.1.4.1.1991.1.2.13.1.1.2
The Loopback Interface mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snLoopbackIntfRowStatus 1.3.6.1.4.1.1991.1.2.13.1.1.3
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor