Fore-TCM-MIB
File:
Fore-TCM-MIB.mib (66186 bytes)
Imported modules
Imported symbols
Defined Types
| EsiReferenceSource |
|
| INTEGER |
fab1Pri(1), fab1Sec(2), fab2Pri(3), fab2Sec(4), fab3Pri(5), fab3Sec(6), fab4Pri(7), fab4Sec(8), bits1(9), bits2(10) |
|
|
| EcpBoardEntry |
|
| SEQUENCE |
|
|
|
| |
ecpBoardIndex |
INTEGER |
|
| |
ecpBoardVersion |
Integer32 |
|
| |
ecpBoardSerialNumber |
Integer32 |
|
| |
ecpBoardOtherEcpPresent |
INTEGER |
|
| |
ecpBoardEsiPresent |
INTEGER |
|
| EcpSerialIfEntry |
|
| SEQUENCE |
|
|
|
| |
ecpSerialIfPortIndex |
Integer32 |
|
| |
ecpSerialIfPortType |
INTEGER |
|
| |
ecpSerialIfPortSpeed |
Integer32 |
|
| |
ecpSerialIfFlowType |
INTEGER |
|
| |
ecpSerialIfPortBits |
Integer32 |
|
| |
ecpSerialIfPortStopBits |
INTEGER |
|
| |
ecpSerialIfPortParity |
INTEGER |
|
| EcpAlarmEntry |
|
| SEQUENCE |
|
|
|
| |
ecpAlarmType |
INTEGER |
|
| |
ecpAlarmStatus |
INTEGER |
|
| |
ecpAlarmMinorCategory |
INTEGER |
|
| |
ecpAlarmMajorCategory |
INTEGER |
|
| |
ecpAlarmReset |
Integer32 |
|
| EcpAlarmRelayEntry |
|
| SEQUENCE |
|
|
|
| |
ecpAlarmRelayIndex |
Integer32 |
|
| |
ecpAlarmRelayFunction |
INTEGER |
|
| |
ecpAlarmRelayState |
INTEGER |
|
| EcpSwMainEntry |
|
| SEQUENCE |
|
|
|
| |
ecpName |
DisplayString |
|
| |
ecpHardwareVersion |
Integer32 |
|
| |
ecpSoftwareVersion |
Integer32 |
|
| |
ecpSoftwareVersionText |
DisplayString |
|
| |
ecpType |
INTEGER |
|
| |
ecpOperatingStatus |
INTEGER |
|
| |
ecpProtocolType |
INTEGER |
|
| |
ecpTimeZone |
DisplayString |
|
| |
ecpGMTime |
DateAndTime |
|
| |
ecpUptime |
TimeTicks |
|
| |
ecpModeChangeTime |
DateAndTime |
|
| |
ecpOtherEcpStatus |
INTEGER |
|
| |
ecpExternalInput1 |
INTEGER |
|
| |
ecpExternalInput2 |
INTEGER |
|
| |
ecpExternalInput3 |
INTEGER |
|
| |
ecpExternalInput4 |
INTEGER |
|
| |
ecpExternalInput5 |
INTEGER |
|
| EcpNetIfEntry |
|
| SEQUENCE |
|
|
|
| |
ecpNetIfIndex |
Integer32 |
|
| |
ecpNetIfDescr |
DisplayString |
|
| |
ecpNetIfPhysAddress |
PhysAddress |
|
| |
ecpNetIfAdminStatus |
INTEGER |
|
| |
ecpNetIfOperStatus |
INTEGER |
|
| |
ecpNetIfLastChange |
TimeTicks |
|
| |
ecpNetIfIpAddr |
IpAddress |
|
| |
ecpNetIfIpMask |
IpAddress |
|
| |
ecpNetIfIpBcastAddr |
Integer32 |
|
| EcpNetIfStatsEntry |
|
| SEQUENCE |
|
|
|
| |
ecpNetIfInOctets |
Counter32 |
|
| |
ecpNetIfInUcastPkts |
Counter32 |
|
| |
ecpNetIfInNUcastPkts |
Counter32 |
|
| |
ecpNetIfInDiscards |
Counter32 |
|
| |
ecpNetIfInErrors |
Counter32 |
|
| |
ecpNetIfInUnknownProtos |
Counter32 |
|
| |
ecpNetIfOutOctets |
Counter32 |
|
| |
ecpNetIfOutUcastPkts |
Counter32 |
|
| |
ecpNetIfOutNUcastPkts |
Counter32 |
|
| |
ecpNetIfOutDiscards |
Counter32 |
|
| |
ecpNetIfOutErrors |
Counter32 |
|
| |
ecpNetIfOutQLen |
Gauge32 |
|
| EcpIpStatsEntry |
|
| SEQUENCE |
|
|
|
| |
ecpIpInReceives |
Counter32 |
|
| |
ecpIpInHdrErrors |
Counter32 |
|
| |
ecpIpInAddrErrors |
Counter32 |
|
| |
ecpIpForwDatagrams |
Counter32 |
|
| |
ecpIpInUnknownProtos |
Counter32 |
|
| |
ecpIpInDiscards |
Counter32 |
|
| |
ecpIpInDelivers |
Counter32 |
|
| |
ecpIpOutRequests |
Counter32 |
|
| |
ecpIpOutDiscards |
Counter32 |
|
| |
ecpIpOutNoRoutes |
Counter32 |
|
| |
ecpIpReasmReqds |
Counter32 |
|
| |
ecpIpReasmOKs |
Counter32 |
|
| |
ecpIpReasmFails |
Counter32 |
|
| |
ecpIpFragOKs |
Counter32 |
|
| |
ecpIpFragFails |
Counter32 |
|
| |
ecpIpFragCreates |
Counter32 |
|
| EcpIpRouteEntry |
|
| SEQUENCE |
|
|
|
| |
ecpIpRouteDest |
IpAddress |
|
| |
ecpIpRouteIfIndex |
Integer32 |
|
| |
ecpIpRouteNextHop |
IpAddress |
|
| |
ecpIpRouteMetric1 |
Integer32 |
|
| |
ecpIpRouteType |
INTEGER |
|
| |
ecpIpRouteMask |
IpAddress |
|
| EcpIcmpStatsEntry |
|
| SEQUENCE |
|
|
|
| |
ecpIcmpInMsgs |
Counter32 |
|
| |
ecpIcmpInErrors |
Counter32 |
|
| |
ecpIcmpInDestUnreach |
Counter32 |
|
| |
ecpIcmpInTimeExcds |
Counter32 |
|
| |
ecpIcmpInParmProbs |
Counter32 |
|
| |
ecpIcmpInSrcQuenchs |
Counter32 |
|
| |
ecpIcmpInRedirects |
Counter32 |
|
| |
ecpIcmpInEchos |
Counter32 |
|
| |
ecpIcmpInEchoReps |
Counter32 |
|
| |
ecpIcmpInTimestamps |
Counter32 |
|
| |
ecpIcmpInTimestampReps |
Counter32 |
|
| |
ecpIcmpInaddrMasks |
Counter32 |
|
| |
ecpIcmpInAddrMaskReps |
Counter32 |
|
| |
ecpIcmpOutMsgs |
Counter32 |
|
| |
ecpIcmpOutErrors |
Counter32 |
|
| |
ecpIcmpOutDestUnreachs |
Counter32 |
|
| |
ecpIcmpOutTimeExcds |
Counter32 |
|
| |
ecpIcmpOutParmProbs |
Counter32 |
|
| |
ecpIcmpOutSrcQuenchs |
Counter32 |
|
| |
ecpIcmpOutRedirects |
Counter32 |
|
| |
ecpIcmpOutEchos |
Counter32 |
|
| |
ecpIcmpOutEchoReps |
Counter32 |
|
| |
ecpIcmpOutTimestamps |
Counter32 |
|
| |
ecpIcmpOutTimestampReps |
Counter32 |
|
| |
ecpIcmpOutAddrMasks |
Counter32 |
|
| |
ecpIcmpOutAddrMaskReps |
Counter32 |
|
| EcpTcpStatsEntry |
|
| SEQUENCE |
|
|
|
| |
ecpTcpActiveOpens |
Counter32 |
|
| |
ecpTcpPassiveOpens |
Counter32 |
|
| |
ecpTcpAttemptFails |
Counter32 |
|
| |
ecpTcpEstabResets |
Counter32 |
|
| |
ecpTcpCurrEstab |
Counter32 |
|
| |
ecpTcpInSegs |
Counter32 |
|
| |
ecpTcpOutSegs |
Counter32 |
|
| |
ecpTcpRetransSegs |
Counter32 |
|
| EcpUdpStatsEntry |
|
| SEQUENCE |
|
|
|
| |
ecpUdpInDatagrams |
Counter32 |
|
| |
ecpUdpNoPorts |
Counter32 |
|
| |
ecpUdpInErrors |
Counter32 |
|
| |
ecpUdpOutDatagrams |
Counter32 |
|
| EcpIpConfigEntry |
|
| SEQUENCE |
|
|
|
| |
ecpIpForwarding |
INTEGER |
|
| EcpTrapDestEntry |
|
| SEQUENCE |
|
|
|
| |
ecpTrapDest |
IpAddress |
|
| |
ecpTrapDestStatus |
EntryStatus |
|
| EsiCardHwEntry |
|
| SEQUENCE |
|
|
|
| |
esiCardIndex |
INTEGER |
|
| |
esiHwCardType |
INTEGER |
|
| |
esiHwCardVersion |
Integer32 |
|
| |
esiHwPllStatus |
INTEGER |
|
| EsiCardSwEntry |
|
| SEQUENCE |
|
|
|
| |
esiOperationStatus |
INTEGER |
|
| |
esiCurrentTimingRef |
INTEGER |
|
| |
esiRequestedTimingRef |
INTEGER |
|
| |
esiPrimaryRefSource |
EsiReferenceSource |
|
| |
esiSecondaryRefSource |
EsiReferenceSource |
|
| |
esiCurrentFaultBits |
Integer32 |
|
| |
esiBitsFramingFormat |
INTEGER |
|
| |
esiBitsCodingFormat |
INTEGER |
|
| |
esiBitsOutputLevel |
INTEGER |
|
| |
esiRevertiveSwitching |
INTEGER |
|
| |
esiRevertiveDelay |
TimeInterval |
|
| |
esiSwitchingDelay |
TimeInterval |
|
| EsiReferenceEntry |
|
| SEQUENCE |
|
|
|
| |
esiRefSource |
EsiReferenceSource |
|
| |
esiRefSourceText |
DisplayString |
|
| |
esiRefSourceStatus |
INTEGER |
|
| |
esiRefSourceAdminStatus |
INTEGER |
|
| |
esiRefSourceQualStatus |
INTEGER |
|
Defined Values
| ecpStationModule |
1.3.6.1.4.1.326.2.2.1.7 |
| The Timing Control Module (TCM). |
| MODULE-IDENTITY |
|
|
|
| ecpHardware |
1.3.6.1.4.1.326.2.2.1.7.1 |
| OBJECT IDENTIFIER |
|
|
|
| ecpSoftware |
1.3.6.1.4.1.326.2.2.1.7.2 |
| OBJECT IDENTIFIER |
|
|
|
| ecpSwMainGroup |
1.3.6.1.4.1.326.2.2.1.7.2.1 |
| OBJECT IDENTIFIER |
|
|
|
| ecpIpGroup |
1.3.6.1.4.1.326.2.2.1.7.2.2 |
| OBJECT IDENTIFIER |
|
|
|
| ecpSnmp |
1.3.6.1.4.1.326.2.2.1.7.2.3 |
| OBJECT IDENTIFIER |
|
|
|
| esiCard |
1.3.6.1.4.1.326.2.2.1.8 |
| OBJECT IDENTIFIER |
|
|
|
| esiHardware |
1.3.6.1.4.1.326.2.2.1.8.1 |
| OBJECT IDENTIFIER |
|
|
|
| esiSoftware |
1.3.6.1.4.1.326.2.2.1.8.2 |
| OBJECT IDENTIFIER |
|
|
|
| ecpBoardTable |
1.3.6.1.4.1.326.2.2.1.7.1.1 |
| This table contains Extended Control Processor (ECP)
board information. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EcpBoardEntry |
|
| ecpBoardEntry |
1.3.6.1.4.1.326.2.2.1.7.1.1.1 |
| This entry contains Extended Control Processor (ECP)
board information |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EcpBoardEntry |
|
|
| ecpBoardIndex |
1.3.6.1.4.1.326.2.2.1.7.1.1.1.1 |
| This is the Extended Control Processor board index
within the management station. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
slotX(1), slotY(2) |
|
| ecpBoardVersion |
1.3.6.1.4.1.326.2.2.1.7.1.1.1.2 |
| This is the version number of this Extended Control
Processor (ECP) board. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ecpBoardSerialNumber |
1.3.6.1.4.1.326.2.2.1.7.1.1.1.3 |
| This is the serial number of this Extended Control
Processor (ECP) board. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ecpBoardOtherEcpPresent |
1.3.6.1.4.1.326.2.2.1.7.1.1.1.4 |
| This is the other ECP board present indicator for this
Extended Control Processor (ECP) board. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ecpPresent(1), ecpAbsent(2) |
|
| ecpBoardEsiPresent |
1.3.6.1.4.1.326.2.2.1.7.1.1.1.5 |
| This is the External Synchronization Interface (ESI) present
indicator for this Extended Control Processor (ECP) board. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
esiPresent(1), esiAbsent(2) |
|
| ecpSerialIfTable |
1.3.6.1.4.1.326.2.2.1.7.1.2 |
| This table contains the serial port interface information
for the Extended Control Processor (ECP) board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EcpSerialIfEntry |
|
| ecpSerialIfEntry |
1.3.6.1.4.1.326.2.2.1.7.1.2.1 |
| This entry contains the serial port interface information
for the Extended Control Processor (ECP) board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EcpSerialIfEntry |
|
|
| ecpSerialIfPortIndex |
1.3.6.1.4.1.326.2.2.1.7.1.2.1.1 |
| This is the serial port interface index for this port on
the Extended Control Processor (ECP) board. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ecpSerialIfPortType |
1.3.6.1.4.1.326.2.2.1.7.1.2.1.2 |
| This is the serial port interface type for this port on
the Extended Control Processor (ECP) board. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), rs232(2), rs422(3), rs423(4), v35(5), x21(6) |
|
| ecpSerialIfPortSpeed |
1.3.6.1.4.1.326.2.2.1.7.1.2.1.3 |
| This is the serial port interface speed for this port on
the Extended Control Processor (ECP) board. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ecpSerialIfFlowType |
1.3.6.1.4.1.326.2.2.1.7.1.2.1.4 |
| This is the serial port interface flow control for this
port on the Extended Control Processor (ECP) board. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), ctsRts(2), dsrDtr(3) |
|
| ecpSerialIfPortBits |
1.3.6.1.4.1.326.2.2.1.7.1.2.1.5 |
| This is the serial port interface character size for this
port on the Extended Control Processor (ECP) board. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ecpSerialIfPortStopBits |
1.3.6.1.4.1.326.2.2.1.7.1.2.1.6 |
| This is the serial port interface stop bit count for this
port on the Extended Control Processor (ECP) board. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
one(1), two(2), oneAndHalf(3), dynamic(4) |
|
| ecpSerialIfPortParity |
1.3.6.1.4.1.326.2.2.1.7.1.2.1.7 |
| This is the serial port interface character parity for this
port on the Extended Control Processor (ECP) board. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), odd(2), even(3), mark(4), space(5) |
|
| ecpAlarmTable |
1.3.6.1.4.1.326.2.2.1.7.1.3.1.1 |
| A table of switch alarm definitions and configuration. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EcpAlarmEntry |
|
| ecpAlarmEntry |
1.3.6.1.4.1.326.2.2.1.7.1.3.1.1.1 |
| A table entry containing switch alarm definitions. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EcpAlarmEntry |
|
|
| ecpAlarmType |
1.3.6.1.4.1.326.2.2.1.7.1.3.1.1.1.1 |
| The type of the alarm. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
powerSupplyInputFailed(1), powerSupplyOutputFailed(2), fanBankFailed(3), tempSensorOverTemp(4), linkFailed(5), spansFailed(6), powerSupplyOverCurrent(7), powerSupply5VoltFailed(8), faultyOrMissingStandbyTcm(9), esiLossOfSyncSrc(10) |
|
| ecpAlarmStatus |
1.3.6.1.4.1.326.2.2.1.7.1.3.1.1.1.2 |
| The status of this alarm entry. An alarm becomes
active if the underlying condition is detected.
For power supplies, the input failed alarm condition
is asserted if the input voltage is not within
the nominal range for the supply. This does not
necessarily mean that an ouput failure will result.
A power supply output failure condition is asserted
if any power supply is failing or if it is physically
removed. Power supply output alarms are only applicable
to switches with multiple power supplies. Fan bank
and temperature sensor failures are applicable only
to switches with the appropriate sensing capabilities.
Link and spans failures are applicable to all switches. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
active(1), inactive(2) |
|
| ecpAlarmMinorCategory |
1.3.6.1.4.1.326.2.2.1.7.1.3.1.1.1.3 |
| This object indicates whether a minor alarm is triggered
when this event occurs. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| ecpAlarmMajorCategory |
1.3.6.1.4.1.326.2.2.1.7.1.3.1.1.1.4 |
| This object indicates whether a major alarm is triggered
when this event occurs. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| ecpAlarmReset |
1.3.6.1.4.1.326.2.2.1.7.1.3.1.1.1.5 |
| The manager may set this to the value zero to cancel
a current alarm. This is useful for silencing alarms
triggered via edge detection. If this variable is
readable, then the alarm is resettable. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ecpAlarmMajorRelayState |
1.3.6.1.4.1.326.2.2.1.7.1.3.1.2 |
| This object indicates the current state of the major alarm
relay. If one or more of the alarms (ecpAlarmType) that are
defined major (ecpAlarmMajorCategory) are currently active
(ecpAlarmStatus), this object will be on(1). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
on(1), off(2) |
|
| ecpAlarmMinorRelayState |
1.3.6.1.4.1.326.2.2.1.7.1.3.1.3 |
| This object indicates the current state of the minor alarm
relay. Ifone or mote of the alarms (ecpAlarmType) that are
defined minor (ecpAlarmMinorCategory) are currently active
(ecpAlarmStatus), this object will be on(1). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
on(1), off(2) |
|
| ecpAlarmRelayTable |
1.3.6.1.4.1.326.2.2.1.7.1.3.1.4 |
| This table contains the alarm relay definitions for the
Extended Control Processor (ECP) board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EcpAlarmRelayEntry |
|
| ecpAlarmRelayEntry |
1.3.6.1.4.1.326.2.2.1.7.1.3.1.4.1 |
| This entry contains the alarm relay definitions for the
Extended Control Processor (ECP) board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EcpAlarmRelayEntry |
|
|
| ecpAlarmRelayIndex |
1.3.6.1.4.1.326.2.2.1.7.1.3.1.4.1.1 |
| This is the index of the alarm relay on the Extended
Control Processor (ECP). The Raven ECP has 5 addressable
alarm relays (1-5). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ecpAlarmRelayFunction |
1.3.6.1.4.1.326.2.2.1.7.1.3.1.4.1.2 |
| This is the alarm function associated with an alarm
relay on the Extended Control Processor (ECP). An
alarm relay may either be unused, assigned to the major
alarm, or assigned to the minor alarm. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ecpUnusedRelay(1), ecpMajorAlarmRelay(2), ecpMinorAlarmRelay(3) |
|
| ecpAlarmRelayState |
1.3.6.1.4.1.326.2.2.1.7.1.3.1.4.1.3 |
| This is the current state of the alarm relay on the
Extended Control Processor (ECP). The state 'on'
means that the alarm relay is activated; the state 'off'
means that it is deactivated. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
on(1), off(2) |
|
| ecpSwMainTable |
1.3.6.1.4.1.326.2.2.1.7.2.1.1 |
| The table contains the Extended Control Processor
(ECP) information maintained by the control software. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EcpSwMainEntry |
|
| ecpSwMainEntry |
1.3.6.1.4.1.326.2.2.1.7.2.1.1.1 |
| This entry contains the Extended Control Processor
(ECP) information maintained by the control software. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EcpSwMainEntry |
|
|
| ecpName |
1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.1 |
| This is the system name of this Extended Control
Processor (ECP) platform. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| ecpHardwareVersion |
1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.2 |
| This is the hardware version of the Extended Control
Processor (ECP) platform. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ecpSoftwareVersion |
1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.3 |
| This is the software version of the Extended Control
Processor (ECP) control software. The version is encoded
into 6 hex characters. Version 1.2.3 would be 0x010203. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ecpSoftwareVersionText |
1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.4 |
| This is the software version text of the Extended
Control Processor (ECP) control software. This object
contains information regarding the software configuration
that was used to build this software. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| ecpType |
1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.5 |
| This is the type of the Extended Control Processor
(ECP) board. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unrecognized(1), cec-plus(2), cec-plus-t(3) |
|
| ecpOperatingStatus |
1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.6 |
| This is the software status of this Extended
Control Processor (ECP). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ecpUnknown(1), ecpStandby(2), ecpActive(3), ecpOffline(4) |
|
| ecpProtocolType |
1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.7 |
| The transfer protocol that is used when upgrading the
software, saving/restoring the CDB, etc. on this
Extended Control Processor (ECP) board. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
tftp(1), ftp(2) |
|
| ecpTimeZone |
1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.8 |
| The TimeZone configured for this Extended Control
Processor (ECP). This variable follows the POSIX standard
1003.1-1988 for the format of the TZ environment variable.
In particular, it is general enough to specify the rules
for converting from Standard to Daylight Savings time
for most timezones of the world.
By default, the ECP has the rules built in for the following
timezones:
EST5EDT
CST6CDT
MST7MDT
PST8PDT
AKST9AKDT.
Locales outside of these timezones will need to
supply the appropriate rule for switching between
Daylight and Standard time. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| ecpGMTime |
1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.9 |
| The Extended Control Processor's (ECP's) notion of
Greenwich Mean Time. Linked to hrSystemDate. Offset
part of time spec, if supplied, is considered an error. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DateAndTime |
|
|
| ecpUptime |
1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.10 |
| This is the amount of time that the Extended Control
Processor (ECP) control software has been running, in
hundredths of a second. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| ecpModeChangeTime |
1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.11 |
| This is the time that the Extended Control Processor (ECP)
control software has switched to the current operating mode. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DateAndTime |
|
|
| ecpOtherEcpStatus |
1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.12 |
| This is the software status of the other Extended
Control Processor (ECP) from the viewpoint of this ECP. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ecpNormal(1), ecpUnknown(2) |
|
| ecpNetIfTable |
1.3.6.1.4.1.326.2.2.1.7.2.2.1 |
| This table contains the network interface information
for the Extended Control Processor (ECP) board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EcpNetIfEntry |
|
| ecpNetIfEntry |
1.3.6.1.4.1.326.2.2.1.7.2.2.1.1 |
| This entry contains the network interface information
for the Extended Control Processor (ECP) board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EcpNetIfEntry |
|
|
| ecpNetIfIndex |
1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.1 |
| A unique value for each interface. Its value
ranges between 1 and the value of ifNumber. The
value for each interface must remain constant at
least from one re-initialization of the entity's
network management system to the next re-
initialization. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ecpNetIfDescr |
1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.2 |
| A textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| ecpNetIfPhysAddress |
1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.3 |
| The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet string of zero length. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PhysAddress |
|
|
| ecpNetIfAdminStatus |
1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.4 |
| The desired state of the interface. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2) |
|
| ecpNetIfOperStatus |
1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.5 |
| The current operational state of the interface. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2) |
|
| ecpNetIfLastChange |
1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.6 |
| The value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object contains a zero
value. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| ecpNetIfIpAddr |
1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.7 |
| The IP address associated with this network interface. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| ecpNetIfIpMask |
1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.8 |
| The subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| ecpNetIfIpBcastAddr |
1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.9 |
| The value of the least-significant bit in the IP
broadcast address used for sending datagrams on
the (logical) interface associated with the IP
address of this entry. For example, when the
Internet standard all-ones broadcast address is
used, the value will be 1. This value applies to
both the subnet and network broadcasts addresses
used by the entity on this (logical) interface. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ecpNetIfStatsTable |
1.3.6.1.4.1.326.2.2.1.7.2.2.2 |
| This table contains the network interface statistics
for the Extended Control Processor (ECP) board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EcpNetIfStatsEntry |
|
| ecpNetIfStatsEntry |
1.3.6.1.4.1.326.2.2.1.7.2.2.2.1 |
| This entry contains the network interface statistics
for the Extended Control Processor (ECP) board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EcpNetIfStatsEntry |
|
|
| ecpNetIfInOctets |
1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.1 |
| The total number of octets received on the
interface, including framing characters. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpNetIfInUcastPkts |
1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.2 |
| The number of subnetwork-unicast packets
delivered to a higher-layer protocol. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpNetIfInNUcastPkts |
1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.3 |
| The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpNetIfInDiscards |
1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.4 |
| The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet could be to free up
buffer space. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpNetIfInErrors |
1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.5 |
| The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpNetIfInUnknownProtos |
1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.6 |
| The number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpNetIfOutOctets |
1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.7 |
| The total number of octets transmitted out of the
interface, including framing characters. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpNetIfOutUcastPkts |
1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.8 |
| The total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpNetIfOutNUcastPkts |
1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.9 |
| The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpNetIfOutDiscards |
1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.10 |
| The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer space. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpNetIfOutErrors |
1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.11 |
| The number of outbound packets that could not be
transmitted because of errors. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpNetIfOutQLen |
1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.12 |
| The length of the output packet queue (in
packets). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| ecpIpStatsTable |
1.3.6.1.4.1.326.2.2.1.7.2.2.3 |
| This table contains the Internet protocol statistics
for the Extended Control Processor (ECP) board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EcpIpStatsEntry |
|
| ecpIpStatsEntry |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1 |
| This entry contains the Internet protocol statistics
for the Extended Control Processor (ECP) board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EcpIpStatsEntry |
|
|
| ecpIpInReceives |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.1 |
| The total number of input datagrams received from
interfaces, including those received in error. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpInHdrErrors |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.2 |
| The number of input datagrams discarded due to
errors in their IP headers, including bad
checksums, version number mismatch, other format
errors, time-to-live exceeded, errors discovered
in processing their IP options, etc. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpInAddrErrors |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.3 |
| The number of input datagrams discarded because
the IP address in their IP header's destination
field was not a valid address to be received at
this entity. This count includes invalid
addresses (e.g., 0.0.0.0) and addresses of
unsupported Classes (e.g., Class E). For entities
which are not IP Gateways and therefore do not
forward datagrams, this counter includes datagrams
discarded because the destination address was not
a local address. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpForwDatagrams |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.4 |
| The number of input datagrams for which this
entity was not their final IP destination, as a
result of which an attempt was made to find a
route to forward them to that final destination.
In entities which do not act as IP Gateways, this
counter will include only those packets which were
Source-Routed via this entity, and the Source-
Route option processing was successful. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpInUnknownProtos |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.5 |
| The number of locally-addressed datagrams
received successfully but discarded because of an
unknown or unsupported protocol. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpInDiscards |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.6 |
| The number of input IP datagrams for which no
problems were encountered to prevent their
continued processing, but which were discarded
(e.g., for lack of buffer space). Note that this
counter does not include any datagrams discarded
while awaiting re-assembly. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpInDelivers |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.7 |
| The total number of input datagrams successfully
delivered to IP user-protocols (including ICMP). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpOutRequests |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.8 |
| The total number of IP datagrams which local IP
user-protocols (including ICMP) supplied to IP in
requests for transmission. Note that this counter
does not include any datagrams counted in
ipForwDatagrams. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpOutDiscards |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.9 |
| The number of output IP datagrams for which no
problem was encountered to prevent their
transmission to their destination, but which were
discarded (e.g., for lack of buffer space). Note
that this counter would include datagrams counted
in ipForwDatagrams if any such packets met this
(discretionary) discard criterion. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpOutNoRoutes |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.10 |
| The number of IP datagrams discarded because no
route could be found to transmit them to their
destination. Note that this counter includes any
packets counted in ipForwDatagrams which meet this
`no-route' criterion. Note that this includes any
datagarms which a host cannot route because all of
its default gateways are down. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpReasmReqds |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.11 |
| The number of IP fragments received which needed
to be reassembled at this entity. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpReasmOKs |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.12 |
| The number of IP datagrams successfully re-
assembled. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpReasmFails |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.13 |
| The number of failures detected by the IP re-
assembly algorithm (for whatever reason: timed
out, errors, etc). Note that this is not
necessarily a count of discarded IP fragments
since some algorithms (notably the algorithm in
RFC 815) can lose track of the number of fragments
by combining them as they are received. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpFragOKs |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.14 |
| The number of IP datagrams that have been
successfully fragmented at this entity. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpFragFails |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.15 |
| The number of IP datagrams that have been
discarded because they needed to be fragmented at
this entity but could not be, e.g., because their
Don't Fragment flag was set. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpFragCreates |
1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.16 |
| The number of IP datagram fragments that have
been generated as a result of fragmentation at
this entity. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpRouteTable |
1.3.6.1.4.1.326.2.2.1.7.2.2.4 |
| This table contains the Internet Protocol routing entries
for the Extended Control Processor (ECP) board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EcpIpRouteEntry |
|
| ecpIpRouteEntry |
1.3.6.1.4.1.326.2.2.1.7.2.2.4.1 |
| This entry contains the Internet Protocol routing data
for the Extended Control Processor (ECP) board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EcpIpRouteEntry |
|
|
| ecpIpRouteDest |
1.3.6.1.4.1.326.2.2.1.7.2.2.4.1.1 |
| The destination IP address of this route. An
entry with a value of 0.0.0.0 is considered a
default route. Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is dependent on the table-
access mechanisms defined by the network
management protocol in use. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| ecpIpRouteIfIndex |
1.3.6.1.4.1.326.2.2.1.7.2.2.4.1.2 |
| The index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of
ifIndex. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ecpIpRouteNextHop |
1.3.6.1.4.1.326.2.2.1.7.2.2.4.1.3 |
| The IP address of the next hop of this route.
(In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IP address on that
interface.) |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| ecpIpRouteMetric1 |
1.3.6.1.4.1.326.2.2.1.7.2.2.4.1.4 |
| The primary routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ecpIpRouteType |
1.3.6.1.4.1.326.2.2.1.7.2.2.4.1.5 |
| The type of route. Note that the values
direct(3) and indirect(4) refer to the notion of
direct and indirect routing in the IP
architecture.
Setting this object to the value invalid(2) has
the effect of invalidating the corresponding entry
in the ipRouteTable object. That is, it
effectively dissasociates the destination
identified with said entry from the route
identified with said entry. It is an
implementation-specific matter as to whether the
agent removes an invalidated entry from the table.
Accordingly, management stations must be prepared
to receive tabular information from agents that
corresponds to entries not currently in use.
Proper interpretation of such entries requires
examination of the relevant ipRouteType object. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), invalid(2), direct(3), indirect(4) |
|
| ecpIpRouteMask |
1.3.6.1.4.1.326.2.2.1.7.2.2.4.1.6 |
| Indicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the ipRouteDest field. For those systems
that do not support arbitrary subnet masks, an
agent constructs the value of the ipRouteMask by
determining whether the value of the correspondent
ipRouteDest field belong to a class-A, B, or C
network, and then using one of:
mask network
255.0.0.0 class-A
255.255.0.0 class-B
255.255.255.0 class-C
If the value of the ipRouteDest is 0.0.0.0 (a
default route), then the mask value is also
0.0.0.0. It should be noted that all IP routing
subsystems implicitly use this mechanism. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| ecpIcmpStatsTable |
1.3.6.1.4.1.326.2.2.1.7.2.2.5 |
| This table contains the Internet Control Message Protocol
statistics for the Extended Control Processor (ECP)
board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EcpIcmpStatsEntry |
|
| ecpIcmpStatsEntry |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1 |
| This entry contains the Internet Control Message Protocol
statistics for the Extended Control Processor (ECP)
board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EcpIcmpStatsEntry |
|
|
| ecpIcmpInMsgs |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.1 |
| The total number of ICMP messages which the
entity received. Note that this counter includes
all those counted by icmpInErrors. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpInErrors |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.2 |
| The number of ICMP messages which the entity
received but determined as having ICMP-specific
errors (bad ICMP checksums, bad length, etc.). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpInDestUnreach |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.3 |
| The number of ICMP Destination Unreachable
messages received. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpInTimeExcds |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.4 |
| The number of ICMP Time Exceeded messages
received. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpInParmProbs |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.5 |
| The number of ICMP Parameter Problem messages
received. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpInSrcQuenchs |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.6 |
| The number of ICMP Source Quench messages
received. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpInRedirects |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.7 |
| The number of ICMP Redirect messages received. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpInEchos |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.8 |
| The number of ICMP Echo (request) messages
received. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpInEchoReps |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.9 |
| The number of ICMP Echo Reply messages received. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpInTimestamps |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.10 |
| The number of ICMP Timestamp (request) messages
received. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpInTimestampReps |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.11 |
| The number of ICMP Timestamp Reply messages
received. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpInaddrMasks |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.12 |
| The number of ICMP Address Mask Request messages
received. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpInAddrMaskReps |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.13 |
| The number of ICMP Address Mask Reply messages
received. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpOutMsgs |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.14 |
| The total number of ICMP messages which this
entity attempted to send. Note that this counter
includes all those counted by icmpOutErrors. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpOutErrors |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.15 |
| The number of ICMP messages which this entity did
not send due to problems discovered within ICMP
such as a lack of buffers. This value should not
include errors discovered outside the ICMP layer
such as the inability of IP to route the resultant
datagram. In some implementations there may be no
types of error which contribute to this counter's
value. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpOutDestUnreachs |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.16 |
| The number of ICMP Destination Unreachable
messages sent. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpOutTimeExcds |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.17 |
| The number of ICMP Time Exceeded messages sent. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpOutParmProbs |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.18 |
| The number of ICMP Parameter Problem messages
sent. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpOutSrcQuenchs |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.19 |
| The number of ICMP Source Quench messages sent. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpOutRedirects |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.20 |
| The number of ICMP Redirect messages sent. For a
host, this object will always be zero, since hosts
do not send redirects. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpOutEchos |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.21 |
| The number of ICMP Echo (request) messages sent. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpOutEchoReps |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.22 |
| The number of ICMP Echo Reply messages sent. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpOutTimestamps |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.23 |
| The number of ICMP Timestamp (request) messages
sent. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpOutTimestampReps |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.24 |
| The number of ICMP Timestamp Reply messages
sent. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpOutAddrMasks |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.25 |
| The number of ICMP Address Mask Request messages
sent. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIcmpOutAddrMaskReps |
1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.26 |
| The number of ICMP Address Mask Reply messages
sent. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpTcpStatsTable |
1.3.6.1.4.1.326.2.2.1.7.2.2.6 |
| This table contains the Transmission Control Protocol
statistics for the Extended Control Processor (ECP)
board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EcpTcpStatsEntry |
|
| ecpTcpStatsEntry |
1.3.6.1.4.1.326.2.2.1.7.2.2.6.1 |
| This entry contains the Transmission Control Protocol
statistics for the Extended Control Processor (ECP)
board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EcpTcpStatsEntry |
|
|
| ecpTcpActiveOpens |
1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.1 |
| The number of times TCP connections have made a
direct transition to the SYN-SENT state from the
CLOSED state. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpTcpPassiveOpens |
1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.2 |
| The number of times TCP connections have made a
direct transition to the SYN-RCVD state from the
LISTEN state. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpTcpAttemptFails |
1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.3 |
| The number of times TCP connections have made a
direct transition to the CLOSED state from either
the SYN-SENT state or the SYN-RCVD state, plus the
number of times TCP connections have made a direct
transition to the LISTEN state from the SYN-RCVD
state. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpTcpEstabResets |
1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.4 |
| The number of times TCP connections have made a
direct transition to the CLOSED state from either
the ESTABLISHED state or the CLOSE-WAIT state. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpTcpCurrEstab |
1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.5 |
| The number of TCP connections for which the
current state is either ESTABLISHED or CLOSE-
WAIT. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpTcpInSegs |
1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.6 |
| The total number of segments received, including
those received in error. This count includes
segments received on currently established
connections. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpTcpOutSegs |
1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.7 |
| The total number of segments sent, including
those on current connections but excluding those
containing only retransmitted octets. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpTcpRetransSegs |
1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.8 |
| The total number of segments retransmitted - that
is, the number of TCP segments transmitted
containing one or more previously transmitted
octets. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpUdpStatsTable |
1.3.6.1.4.1.326.2.2.1.7.2.2.7 |
| This table contains the User Datagram Protocol statistics
for the Extended Control Processor (ECP) board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EcpUdpStatsEntry |
|
| ecpUdpStatsEntry |
1.3.6.1.4.1.326.2.2.1.7.2.2.7.1 |
| This entry contains the User Datagram Protocol statistics
for the Extended Control Processor (ECP) board. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EcpUdpStatsEntry |
|
|
| ecpUdpInDatagrams |
1.3.6.1.4.1.326.2.2.1.7.2.2.7.1.1 |
| The total number of UDP datagrams delivered to
UDP users. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpUdpNoPorts |
1.3.6.1.4.1.326.2.2.1.7.2.2.7.1.2 |
| The total number of received UDP datagrams for
which there was no application at the destination
port. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpUdpInErrors |
1.3.6.1.4.1.326.2.2.1.7.2.2.7.1.3 |
| The number of received UDP datagrams that could
not be delivered for reasons other than the lack
of an application at the destination port. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpUdpOutDatagrams |
1.3.6.1.4.1.326.2.2.1.7.2.2.7.1.4 |
| The total number of UDP datagrams sent from this
entity. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ecpIpConfigTable |
1.3.6.1.4.1.326.2.2.1.7.2.2.8 |
| IP Configuration table for the TCMs |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EcpIpConfigEntry |
|
| ecpIpConfigEntry |
1.3.6.1.4.1.326.2.2.1.7.2.2.8.1 |
| IP Configuration table entry for the TCMs |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EcpIpConfigEntry |
|
|
| ecpIpForwarding |
1.3.6.1.4.1.326.2.2.1.7.2.2.8.1.1 |
| The indication of whether this entity is acting
as an IP gateway in respect to the forwarding of
datagrams received by, but not addressed to, this
entity. IP gateways forward datagrams. IP hosts
do not (except those source-routed via the host).
Note that for some managed nodes, this object may
take on only a subset of the values possible.
Accordingly, it is appropriate for an agent to
return a `badValue' response if a management
station attempts to change this object to an
inappropriate value. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
forwarding(1), not-forwarding(2) |
|
| ecpTrapNumberOfDest |
1.3.6.1.4.1.326.2.2.1.7.2.3.1.1 |
| The current number of configured trap destinations.
All traps are sent to all destinations. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ecpTrapDestTable |
1.3.6.1.4.1.326.2.2.1.7.2.3.1.2 |
| A table of destinations to which the agent sends traps. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EcpTrapDestEntry |
|
| ecpTrapDestEntry |
1.3.6.1.4.1.326.2.2.1.7.2.3.1.2.1 |
| A table entry containing address of a management station,
to which the agent sends traps. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EcpTrapDestEntry |
|
|
| ecpTrapDest |
1.3.6.1.4.1.326.2.2.1.7.2.3.1.2.1.1 |
| Address to which the agent sends traps. Usually a network
management station sets this address to itself. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| ecpTrapDestStatus |
1.3.6.1.4.1.326.2.2.1.7.2.3.1.2.1.2 |
| The status of this trap destination entry. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
EntryStatus |
|
|
| esiCardHwTable |
1.3.6.1.4.1.326.2.2.1.8.1.1 |
| This table contains the hardware information for the
External Synchronization Interface (ESI) cards. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EsiCardHwEntry |
|
| esiCardHwEntry |
1.3.6.1.4.1.326.2.2.1.8.1.1.1 |
| This table entry contains the hardware information for
a single External Synchronization Interface (ESI) card. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EsiCardHwEntry |
|
|
| esiCardIndex |
1.3.6.1.4.1.326.2.2.1.8.1.1.1.1 |
| This is the index for this External Synchronization
Interface (ESI) card. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
slotX(1), slotY(2) |
|
| esiHwCardType |
1.3.6.1.4.1.326.2.2.1.8.1.1.1.2 |
| This is the card type for this External Synchronization
Interface (ESI) card. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
esiDs1TypeA(1), esiDs1TypeB(2), esiE1TypeA(3), esiE1TypeB(4) |
|
| esiHwCardVersion |
1.3.6.1.4.1.326.2.2.1.8.1.1.1.3 |
| This is the card version for this External Synchronization
Interface (ESI) card. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| esiHwPllStatus |
1.3.6.1.4.1.326.2.2.1.8.1.1.1.4 |
| This is the card phase-locked loop (PLL) status for this
External Synchronization Interface (ESI) card. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
pllFreeRun(1), pllLocked(2), pllAcquire(3), pllHoldover(4), pllRefQualFail(5) |
|
| esiCardSwTable |
1.3.6.1.4.1.326.2.2.1.8.2.1 |
| This table contains the software information for the
External Synchronization Interface (ESI) cards. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EsiCardSwEntry |
|
| esiCardSwEntry |
1.3.6.1.4.1.326.2.2.1.8.2.1.1 |
| This table entry contains the software information for
a single External Synchronization Interface (ESI) card. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EsiCardSwEntry |
|
|
| esiOperationStatus |
1.3.6.1.4.1.326.2.2.1.8.2.1.1.1 |
| This is the operation status of the clock output for
this External Synchronization Interface (ESI) card. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| esiCurrentTimingRef |
1.3.6.1.4.1.326.2.2.1.8.2.1.1.2 |
| This is the current timing reference in use for this
External Synchronization Interface (ESI) card. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
refFreeRun(1), refIsPrimary(2), refIsSecondary(3), refIsBits1(5), refIsBits2(6) |
|
| esiRequestedTimingRef |
1.3.6.1.4.1.326.2.2.1.8.2.1.1.3 |
| This is the timing reference requested to be used for
this External Synchronization Interface (ESI) card. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
requestFreeRun(1), requestPrimary(2), requestSecondary(3), requestAutomatic(4), requestBits(5) |
|
| esiPrimaryRefSource |
1.3.6.1.4.1.326.2.2.1.8.2.1.1.4 |
| This is the primary timing reference source for this
External Synchronization Interface (ESI) card. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
EsiReferenceSource |
|
|
| esiSecondaryRefSource |
1.3.6.1.4.1.326.2.2.1.8.2.1.1.5 |
| This is the secondary timing reference source for this
External Synchronization Interface (ESI) card. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
EsiReferenceSource |
|
|
| esiCurrentFaultBits |
1.3.6.1.4.1.326.2.2.1.8.2.1.1.6 |
| This is the current state of the fault bits presented by
this External Synchronization Interface (ESI) card. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| esiBitsOutputLevel |
1.3.6.1.4.1.326.2.2.1.8.2.1.1.9 |
| This is the output level (dB) of the DS1 BITS interface
for this External Synchronization Interface (ESI) card. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
esiDs1Level0-6(1), esiDs1Level1-2(2), esiDs1Level1-8(3), esiDs1Level2-4(4), esiDs1Level3-0(5) |
|
| esiRevertiveSwitching |
1.3.6.1.4.1.326.2.2.1.8.2.1.1.10 |
| This is the status of the revertive switching for timing
sources on this External Synchronization Interface (ESI)
card. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| esiRevertiveDelay |
1.3.6.1.4.1.326.2.2.1.8.2.1.1.11 |
| This is the amount of time after the restoration of the
primary timing reference before the External Synchronization
Interface (ESI) card will be instructed to return to the
primary timing reference. This value is truncated to whole
seconds. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TimeInterval |
|
|
| esiSwitchingDelay |
1.3.6.1.4.1.326.2.2.1.8.2.1.1.12 |
| This is the amount of time after the failure of a timing
reference before the External Synchronization Interface
(ESI) card will be instructed to switch to the next available
timing reference. This value is truncated to whole seconds. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TimeInterval |
|
|
| esiReferenceTable |
1.3.6.1.4.1.326.2.2.1.8.2.2 |
| This table contains the timing reference source
information for the External Synchronization Interface
(ESI) card. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EsiReferenceEntry |
|
| esiReferenceEntry |
1.3.6.1.4.1.326.2.2.1.8.2.2.1 |
| This table entry contains the timing reference source
information for a single External Synchronization
Interface (ESI) card. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EsiReferenceEntry |
|
|
| esiRefSource |
1.3.6.1.4.1.326.2.2.1.8.2.2.1.1 |
| This is the timing reference source index for the
External Synchronization Interface (ESI) card. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
EsiReferenceSource |
|
|
| esiRefSourceText |
1.3.6.1.4.1.326.2.2.1.8.2.2.1.2 |
| This is a textual description of the timing reference
source that is provided to the External Synchronization
Interface (ESI) card. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| esiRefSourceStatus |
1.3.6.1.4.1.326.2.2.1.8.2.2.1.3 |
| This is the status of the timing reference source
that is provided to the External Synchornization
Interface (ESI) card. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
available(1), unavailable(2) |
|
| esiRefSourceAdminStatus |
1.3.6.1.4.1.326.2.2.1.8.2.2.1.4 |
| This is the admin status of the timing reference source
that is provided to the External Synchornization
Interface (ESI) card. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2) |
|
| esiRefSourceQualStatus |
1.3.6.1.4.1.326.2.2.1.8.2.2.1.5 |
| This is the RefQual status of the timing reference source
that is provided to the External Synchornization
Interface (ESI) card. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ok(1), fail(2) |
|
| ecpOperatingModeChange |
1.3.6.1.4.1.326.2.2.0.1050 |
| This trap indicates that the Extended Control
Processor (ECP) has change operating state. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| esiTimingSourceChange |
1.3.6.1.4.1.326.2.2.0.1051 |
| This trap is generated whenever the External Synchronization
Interface (ESI) timing source (esiCurrentTimingRef) is changed
either manually or by the system due to failure detection. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| esiTimingSourceFailed |
1.3.6.1.4.1.326.2.2.0.1052 |
| This trap is generated whenever the External Synchronization
Interface (ESI) timing source (esiCurrentTimingRef) fails. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| ecpStandbyFailed |
1.3.6.1.4.1.326.2.2.0.1076 |
| This trap is generated whenever the Standby Timing Control
Module (TCM) appears to haved failed. This is determined by
lack of response from it. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|