G6-HARDWARE-MIB

Imported modules

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
Unsigned32	Counter32	enterprises
NOTIFICATION-TYPE	DisplayString	MacAddress
g6

Defined Types

CableTestConfigEntry
SEQUENCE
	cableTestConfigPortIndex	INTEGER
	cableTestConfigEnableAutoCableTest	INTEGER
	cableTestConfigEventGeneration	INTEGER
	cableTestConfigStartTestNow	DisplayString

IoSignalConfigEntry
SEQUENCE
	ioSignalConfigIndex	INTEGER
	ioSignalConfigSignalMode	INTEGER
	ioSignalConfigInput1Mode	INTEGER
	ioSignalConfigInput1Name	DisplayString
	ioSignalConfigInput2Mode	INTEGER
	ioSignalConfigInput2Name	DisplayString
	ioSignalConfigOutput1Trigger	INTEGER
	ioSignalConfigOutput1Name	DisplayString
	ioSignalConfigOutput2Trigger	INTEGER
	ioSignalConfigOutput2Name	DisplayString

ModuleInfoEntry
SEQUENCE
	moduleInfoIndex	INTEGER
	moduleInfoUnitType	INTEGER
	moduleInfoArticleNumber	DisplayString
	moduleInfoSerialNumber	DisplayString
	moduleInfoHardwareVersion	DisplayString
	moduleInfoProjectNumber	DisplayString
	moduleInfoOccupiedSlots	DisplayString
	moduleInfoDescription	DisplayString

SlotInfoEntry
SEQUENCE
	slotInfoIndex	INTEGER
	slotInfoBoardType	INTEGER
	slotInfoBoardId	Unsigned32
	slotInfoVersionBits	Integer32

PortInfoEntry
SEQUENCE
	portInfoPortIndex	INTEGER
	portInfoSystemSlot	Integer32
	portInfoSwitchPort	Integer32
	portInfoUserSlot	Integer32
	portInfoUserPort	Integer32
	portInfoSnmpPort	Integer32
	portInfoSnmpInstance	Integer32
	portInfoHardwarePort	Integer32
	portInfoInterfaceType	INTEGER
	portInfoProperties	BITS

PortLedsEntry
SEQUENCE
	portLedsPortIndex	INTEGER
	portLedsEthernetColor	INTEGER
	portLedsEthernetBlinking	INTEGER
	portLedsPoeColor	INTEGER
	portLedsPoeBlinking	INTEGER

DeviceLedsEntry
SEQUENCE
	deviceLedsIndex	INTEGER
	deviceLedsSystem1Color	INTEGER
	deviceLedsSystem1Blinking	INTEGER
	deviceLedsSystem2Color	INTEGER
	deviceLedsSystem2Blinking	INTEGER
	deviceLedsPowerOn1Color	INTEGER
	deviceLedsPowerOn1Blinking	INTEGER
	deviceLedsPowerOn2Color	INTEGER
	deviceLedsPowerOn2Blinking	INTEGER
	deviceLedsRing1Color	INTEGER
	deviceLedsRing1Blinking	INTEGER
	deviceLedsRing2Color	INTEGER
	deviceLedsRing2Blinking	INTEGER
	deviceLedsSignalIn1Color	INTEGER
	deviceLedsSignalIn1Blinking	INTEGER
	deviceLedsSignalIn2Color	INTEGER
	deviceLedsSignalIn2Blinking	INTEGER
	deviceLedsSignalOut1Color	INTEGER
	deviceLedsSignalOut1Blinking	INTEGER
	deviceLedsSignalOut2Color	INTEGER
	deviceLedsSignalOut2Blinking	INTEGER

CableTestStatusEntry
SEQUENCE
	cableTestStatusPortIndex	INTEGER
	cableTestStatusUpdateTimeStamp	DisplayString
	cableTestStatusPair0State	INTEGER
	cableTestStatusPair0DistanceToFault	Integer32
	cableTestStatusPair1State	INTEGER
	cableTestStatusPair1DistanceToFault	Integer32
	cableTestStatusPair2State	INTEGER
	cableTestStatusPair2DistanceToFault	Integer32
	cableTestStatusPair3State	INTEGER
	cableTestStatusPair3DistanceToFault	Integer32
	cableTestStatusCableStatus	INTEGER

IoSignalStatusEntry
SEQUENCE
	ioSignalStatusIndex	INTEGER
	ioSignalStatusInput1AlarmActive	INTEGER
	ioSignalStatusInput2AlarmActive	INTEGER
	ioSignalStatusOutput1RelayActive	INTEGER
	ioSignalStatusOutput2RelayActive	INTEGER

TcamStatusEntry
SEQUENCE
	tcamStatusIndex	INTEGER
	tcamStatusControlFile	DisplayString
	tcamStatusDescription	DisplayString

Defined Values

device		1.3.6.1.4.1.3181.10.6.1
Microsens private MIB for Generation 6 Ethernet Switches
MODULE-IDENTITY

hardware		1.3.6.1.4.1.3181.10.6.1.31
OBJECT IDENTIFIER

hardwareLedTest		1.3.6.1.4.1.3181.10.6.1.31.1
Runs a leds test whereby all LED light up in all possible colors for checking their function. The tests terminates within a few seconds.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

hardwareLedMode		1.3.6.1.4.1.3181.10.6.1.31.2
The LED display can be configured to be less intrusive.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dynamic(0), static(1), quiet(2), dark(3), lightshow(4)

hardwarePowerSupply1Monitored		1.3.6.1.4.1.3181.10.6.1.31.3
When disabled a missing power supply 1 will not turn the associated led red on failure. Do this when single power supply 2 operation is used or when the device is powered soley by PoE. This feature only applies to industrial switches.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

hardwarePowerSupply2Monitored		1.3.6.1.4.1.3181.10.6.1.31.4
When disabled a missing power supply 2 will not turn the associated led red on failure. Do this when single power supply 1 operation is used or when the device is powered soley by PoE. This feature only applies to industrial switches.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

hardwareFactoryResetButton		1.3.6.1.4.1.3181.10.6.1.31.5
When disabled the factory button will trigger the factory reset function when pressed for a long time. The IP discover function upon a short button click is not affected.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

cableTestConfigTable		1.3.6.1.4.1.3181.10.6.1.31.6
The cable tester allows for detection of copper cable faults and can even detect where the fault is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CableTestConfigEntry

cableTestConfigEntry		1.3.6.1.4.1.3181.10.6.1.31.6.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	CableTestConfigEntry

cableTestConfigPortIndex		1.3.6.1.4.1.3181.10.6.1.31.6.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..24

cableTestConfigEnableAutoCableTest		1.3.6.1.4.1.3181.10.6.1.31.6.1.2
When enabled a cable test is performed each time the link goes down. The test is only performed for copper ports or dual media ports in copper mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

cableTestConfigEventGeneration		1.3.6.1.4.1.3181.10.6.1.31.6.1.3
When the cable termination status changes an event can be raised.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), anyChange(1), cableUnplugged(2)

cableTestConfigStartTestNow		1.3.6.1.4.1.3181.10.6.1.31.6.1.4
May be used to manually start a cable test. ATTENTION: If the port is in link up status it will be forced to link down first. This will disrupt the current data traffic. Therefore, type start_test_now = CONFIRM.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ioSignalConfigTable		1.3.6.1.4.1.3181.10.6.1.31.7
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IoSignalConfigEntry

ioSignalConfigEntry		1.3.6.1.4.1.3181.10.6.1.31.7.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	IoSignalConfigEntry

ioSignalConfigIndex		1.3.6.1.4.1.3181.10.6.1.31.7.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0

ioSignalConfigSignalMode		1.3.6.1.4.1.3181.10.6.1.31.7.1.2
Permit setting of io signal LEDs and relays to static or blink blink mode for increased visualization.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	static(0), ledBlink(1), relayBlink(2)

ioSignalConfigInput1Mode		1.3.6.1.4.1.3181.10.6.1.31.7.1.3
When this function is activated the external alarm input 1 is monitored. Note: alarm inputs are not available in all product versions.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), alarmWhenHigh(1), alarmWhenLow(2)

ioSignalConfigInput1Name		1.3.6.1.4.1.3181.10.6.1.31.7.1.4
A customer specific name can be specified for input 1. This name will appear in the associated event messages.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ioSignalConfigInput2Mode		1.3.6.1.4.1.3181.10.6.1.31.7.1.5
When this function is activated the external alarm input 2 is monitored. Note: alarm inputs are not available in all product versions.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), alarmWhenHigh(1), alarmWhenLow(2)

ioSignalConfigInput2Name		1.3.6.1.4.1.3181.10.6.1.31.7.1.6
A customer specific name can be specified for input 2. This name will appear in the associated event messages.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ioSignalConfigOutput1Trigger		1.3.6.1.4.1.3181.10.6.1.31.7.1.7
Defines on which condition the alarm relay 1 is activated. Note: alarm relays are not available in all product versions.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), whileRunning(1), redundancyFail(2), highTemp(3), off(4), on(5)

ioSignalConfigOutput1Name		1.3.6.1.4.1.3181.10.6.1.31.7.1.8
A customer specific name can be specified for alarm output 1. This name will appear in the associated event messages.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ioSignalConfigOutput2Trigger		1.3.6.1.4.1.3181.10.6.1.31.7.1.9
Defines on which condition the alarm relay 2 is activated. Note: alarm relays are not available in all product versions.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), whileRunning(1), redundancyFail(2), highTemp(3), off(4), on(5)

ioSignalConfigOutput2Name		1.3.6.1.4.1.3181.10.6.1.31.7.1.10
A customer specific name can be specified for alarm output 2. This name will appear in the associated event messages.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

hardwarePowerSupply1Status		1.3.6.1.4.1.3181.10.6.1.31.100
Displays state of primary supply or only supply for single supply systems.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ok(0), overload(1), inputLow(2), fuseFail(3), notApplicable(4), unmanaged(5), notInstalled(6)

hardwarePowerSupply2Status		1.3.6.1.4.1.3181.10.6.1.31.101
Displays state of secondary supply if available.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ok(0), overload(1), inputLow(2), fuseFail(3), notApplicable(4), unmanaged(5), notInstalled(6)

hardwareRunningOnPoe		1.3.6.1.4.1.3181.10.6.1.31.102
When set the unit currently operates on the PD input via PoE.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

hardwareFanStatus		1.3.6.1.4.1.3181.10.6.1.31.103
Displays state of cooling fan. Indicates UNUSED in fanless devices.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unused(0), ok(1), degraded(2), fail(3), missing(4)

hardwareSdCardStatus		1.3.6.1.4.1.3181.10.6.1.31.104
Current status of SD-card.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	empty(0), inserted(1), writeProtected(2), writing(3)

hardwareNumOfPorts		1.3.6.1.4.1.3181.10.6.1.31.105
Total number of Ethernet ports this hardware offers.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

hardwareMaskOfExistingPorts		1.3.6.1.4.1.3181.10.6.1.31.106
Set bit for each port that physically exisiting and could be in use.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hardwareMaskOfSfpPorts		1.3.6.1.4.1.3181.10.6.1.31.107
Marks which ports support SFPs.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hardwareMaskOfPoePorts		1.3.6.1.4.1.3181.10.6.1.31.108
Marks which ports support PoE output.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

moduleInfoTable		1.3.6.1.4.1.3181.10.6.1.31.109
This section indicates which modules are inserted in the optional extension slots.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ModuleInfoEntry

moduleInfoEntry		1.3.6.1.4.1.3181.10.6.1.31.109.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	ModuleInfoEntry

moduleInfoIndex		1.3.6.1.4.1.3181.10.6.1.31.109.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..3

moduleInfoUnitType		1.3.6.1.4.1.3181.10.6.1.31.109.1.2
Identfies the general type of module.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notPresent(0), baseUnit(1), extension(2)

moduleInfoArticleNumber		1.3.6.1.4.1.3181.10.6.1.31.109.1.3
The article number of the module in this slot.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

moduleInfoSerialNumber		1.3.6.1.4.1.3181.10.6.1.31.109.1.4
The serial number of the module in this slot.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

moduleInfoHardwareVersion		1.3.6.1.4.1.3181.10.6.1.31.109.1.5
This device hardware revision number.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

moduleInfoProjectNumber		1.3.6.1.4.1.3181.10.6.1.31.109.1.6
MICROSENS project number.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

moduleInfoOccupiedSlots		1.3.6.1.4.1.3181.10.6.1.31.109.1.7
Lists all slots contained in this module.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

moduleInfoDescription		1.3.6.1.4.1.3181.10.6.1.31.109.1.8
Feature summary of the module.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

slotInfoTable		1.3.6.1.4.1.3181.10.6.1.31.110
This section indicates which modules are inserted in the optional extension slots.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SlotInfoEntry

slotInfoEntry		1.3.6.1.4.1.3181.10.6.1.31.110.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SlotInfoEntry

slotInfoIndex		1.3.6.1.4.1.3181.10.6.1.31.110.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..7

slotInfoBoardType		1.3.6.1.4.1.3181.10.6.1.31.110.1.2
General type of board function
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notPresent(0), undefined(1), power(2), cpu(3), port(4), io(5)

slotInfoBoardId		1.3.6.1.4.1.3181.10.6.1.31.110.1.3
This identifies the board type for internal operation.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

slotInfoVersionBits		1.3.6.1.4.1.3181.10.6.1.31.110.1.4
Version bits from hardware or backplane.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

portInfoTable		1.3.6.1.4.1.3181.10.6.1.31.111
Used to map physical to logical port ids.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PortInfoEntry

portInfoEntry		1.3.6.1.4.1.3181.10.6.1.31.111.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	PortInfoEntry

portInfoPortIndex		1.3.6.1.4.1.3181.10.6.1.31.111.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..24

portInfoSystemSlot		1.3.6.1.4.1.3181.10.6.1.31.111.1.2
Describes on which system slot this port index is located.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

portInfoSwitchPort		1.3.6.1.4.1.3181.10.6.1.31.111.1.3
Describes on which switch port this port index is located.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

portInfoUserSlot		1.3.6.1.4.1.3181.10.6.1.31.111.1.4
Slot number as seen by customer.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

portInfoUserPort		1.3.6.1.4.1.3181.10.6.1.31.111.1.5
Port number as seen by customer.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

portInfoSnmpPort		1.3.6.1.4.1.3181.10.6.1.31.111.1.6
Slot and port representation as used in SNMP. Formula is Slot*100 + Port.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

portInfoSnmpInstance		1.3.6.1.4.1.3181.10.6.1.31.111.1.7
Port instance counting from 0 to number of ports
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

portInfoHardwarePort		1.3.6.1.4.1.3181.10.6.1.31.111.1.8
Port number as used internally. Ports may not be in sequential order.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

portInfoInterfaceType		1.3.6.1.4.1.3181.10.6.1.31.111.1.9
Identifies port as copper or optical. Also used for snmp ifType definition
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	copper(0), optical(1), dualMedia(2)

portInfoProperties		1.3.6.1.4.1.3181.10.6.1.31.111.1.10
Describes which functions the port can support.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	internal(0), ms10Mb(1), ms100Mb(2), ms1000Mb(3), rj45(4), sfp(5), ms1x9(6), poe(7), poePlus(8), pd(9), dualMedia(10), linkPort(11), csfp(12)

portLedsTable		1.3.6.1.4.1.3181.10.6.1.31.112
This section indicates the state of all port related LEDs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PortLedsEntry

portLedsEntry		1.3.6.1.4.1.3181.10.6.1.31.112.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	PortLedsEntry

portLedsPortIndex		1.3.6.1.4.1.3181.10.6.1.31.112.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..31

portLedsEthernetColor		1.3.6.1.4.1.3181.10.6.1.31.112.1.2
Ethernet Link LED.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)

portLedsEthernetBlinking		1.3.6.1.4.1.3181.10.6.1.31.112.1.3
Ethernet Link LED.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

portLedsPoeColor		1.3.6.1.4.1.3181.10.6.1.31.112.1.4
Power over Ethernet LED. For optical ports this indicates signal detect status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)

portLedsPoeBlinking		1.3.6.1.4.1.3181.10.6.1.31.112.1.5
Power over Ethernet LED. For optical ports this indicates signal detect status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

deviceLedsTable		1.3.6.1.4.1.3181.10.6.1.31.113
This section indicates the state of all LEDs which are not port related. Please note: Not every unit offers all LEDs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DeviceLedsEntry

deviceLedsEntry		1.3.6.1.4.1.3181.10.6.1.31.113.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	DeviceLedsEntry

deviceLedsIndex		1.3.6.1.4.1.3181.10.6.1.31.113.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0

deviceLedsSystem1Color		1.3.6.1.4.1.3181.10.6.1.31.113.1.2
This status corresponds to 'sys' LED on some devices.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)

deviceLedsSystem1Blinking		1.3.6.1.4.1.3181.10.6.1.31.113.1.3
This status corresponds to 'sys' LED on some devices.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

deviceLedsSystem2Color		1.3.6.1.4.1.3181.10.6.1.31.113.1.4
Displays external management activity.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)

deviceLedsSystem2Blinking		1.3.6.1.4.1.3181.10.6.1.31.113.1.5
Displays external management activity.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

deviceLedsPowerOn1Color		1.3.6.1.4.1.3181.10.6.1.31.113.1.6
This status corresponds to 'on' LED on some devices.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)

deviceLedsPowerOn1Blinking		1.3.6.1.4.1.3181.10.6.1.31.113.1.7
This status corresponds to 'on' LED on some devices.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

deviceLedsPowerOn2Color		1.3.6.1.4.1.3181.10.6.1.31.113.1.8
Alternative power input LED.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)

deviceLedsPowerOn2Blinking		1.3.6.1.4.1.3181.10.6.1.31.113.1.9
Alternative power input LED.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

deviceLedsRing1Color		1.3.6.1.4.1.3181.10.6.1.31.113.1.10
This LED is used when ring protection is enabled.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)

deviceLedsRing1Blinking		1.3.6.1.4.1.3181.10.6.1.31.113.1.11
This LED is used when ring protection is enabled.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

deviceLedsRing2Color		1.3.6.1.4.1.3181.10.6.1.31.113.1.12
This LED is used when ring protection is enabled.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)

deviceLedsRing2Blinking		1.3.6.1.4.1.3181.10.6.1.31.113.1.13
This LED is used when ring protection is enabled.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

deviceLedsSignalIn1Color		1.3.6.1.4.1.3181.10.6.1.31.113.1.14
Indicates status of alarm input 1.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)

deviceLedsSignalIn1Blinking		1.3.6.1.4.1.3181.10.6.1.31.113.1.15
Indicates status of alarm input 1.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

deviceLedsSignalIn2Color		1.3.6.1.4.1.3181.10.6.1.31.113.1.16
Indicates status of alarm input 2.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)

deviceLedsSignalIn2Blinking		1.3.6.1.4.1.3181.10.6.1.31.113.1.17
Indicates status of alarm input 2.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

deviceLedsSignalOut1Color		1.3.6.1.4.1.3181.10.6.1.31.113.1.18
Indicates status of alarm relay output 1.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)

deviceLedsSignalOut1Blinking		1.3.6.1.4.1.3181.10.6.1.31.113.1.19
Indicates status of alarm relay output 1.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

deviceLedsSignalOut2Color		1.3.6.1.4.1.3181.10.6.1.31.113.1.20
Indicates status of alarm relay output 2.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)

deviceLedsSignalOut2Blinking		1.3.6.1.4.1.3181.10.6.1.31.113.1.21
Indicates status of alarm relay output 2.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

cableTestStatusTable		1.3.6.1.4.1.3181.10.6.1.31.114
This table display the result of the last cable test. Values are only available for copper ports while a link is down and if the cable test function is enabled.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CableTestStatusEntry

cableTestStatusEntry		1.3.6.1.4.1.3181.10.6.1.31.114.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	CableTestStatusEntry

cableTestStatusPortIndex		1.3.6.1.4.1.3181.10.6.1.31.114.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..24

cableTestStatusUpdateTimeStamp		1.3.6.1.4.1.3181.10.6.1.31.114.1.2
Indicates the time when this record was last updated.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

cableTestStatusPair0State		1.3.6.1.4.1.3181.10.6.1.31.114.1.3
Indicates line termination test results for wire pair 0 (Pins 1/2)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(0), pairOk(1), pairOpen(2), samePairShort(3), crossPairShort(4)

cableTestStatusPair0DistanceToFault		1.3.6.1.4.1.3181.10.6.1.31.114.1.4
Distance to fault on wire pair 0 in centimeters. Indicates 0 when no fault is detected or the function is unused.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

cableTestStatusPair1State		1.3.6.1.4.1.3181.10.6.1.31.114.1.5
Indicates line termination test results for wire pair 1 (Pins 3/6)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(0), pairOk(1), pairOpen(2), samePairShort(3), crossPairShort(4)

cableTestStatusPair1DistanceToFault		1.3.6.1.4.1.3181.10.6.1.31.114.1.6
Distance to fault on wire pair 1 in centimeters. Indicates 0 when no fault is detected or the function is unused.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

cableTestStatusPair2State		1.3.6.1.4.1.3181.10.6.1.31.114.1.7
Indicates line termination test results for wire pair 2 (Pins 4/5)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(0), pairOk(1), pairOpen(2), samePairShort(3), crossPairShort(4)

cableTestStatusPair2DistanceToFault		1.3.6.1.4.1.3181.10.6.1.31.114.1.8
Distance to fault on wire pair 2 in centimeters. Indicates 0 when no fault is detected or the function is unused.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

cableTestStatusPair3State		1.3.6.1.4.1.3181.10.6.1.31.114.1.9
Indicates line termination test results for wire pair 3 (Pins 7/8)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(0), pairOk(1), pairOpen(2), samePairShort(3), crossPairShort(4)

cableTestStatusPair3DistanceToFault		1.3.6.1.4.1.3181.10.6.1.31.114.1.10
Distance to fault on wire pair 3 in centimeters. Indicates 0 when no fault is detected or the function is unused.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

cableTestStatusCableStatus		1.3.6.1.4.1.3181.10.6.1.31.114.1.11
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(0), pluggedIn(1), open(2)

ioSignalStatusTable		1.3.6.1.4.1.3181.10.6.1.31.115
This section is only used for devices which offer external signal inputs and outputs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IoSignalStatusEntry

ioSignalStatusEntry		1.3.6.1.4.1.3181.10.6.1.31.115.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	IoSignalStatusEntry

ioSignalStatusIndex		1.3.6.1.4.1.3181.10.6.1.31.115.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0

ioSignalStatusInput1AlarmActive		1.3.6.1.4.1.3181.10.6.1.31.115.1.2
Indicates true when the input 1 is logically active.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

ioSignalStatusInput2AlarmActive		1.3.6.1.4.1.3181.10.6.1.31.115.1.3
Indicates true when the input 2 is logically active.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

ioSignalStatusOutput1RelayActive		1.3.6.1.4.1.3181.10.6.1.31.115.1.4
Indicates true when the output 1 relay is activated.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

ioSignalStatusOutput2RelayActive		1.3.6.1.4.1.3181.10.6.1.31.115.1.5
Indicates true when the output 2 relay is activated.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

tcamStatusTable		1.3.6.1.4.1.3181.10.6.1.31.116
This section is only used for devices which offer external signal inputs and outputs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TcamStatusEntry

tcamStatusEntry		1.3.6.1.4.1.3181.10.6.1.31.116.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	TcamStatusEntry

tcamStatusIndex		1.3.6.1.4.1.3181.10.6.1.31.116.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..255

tcamStatusControlFile		1.3.6.1.4.1.3181.10.6.1.31.116.1.2
Reflects the name of the control file associated with this tcam entry.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tcamStatusDescription		1.3.6.1.4.1.3181.10.6.1.31.116.1.3
Descriptive text what explains what this tcam entry will do.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString