G9983-MIB

File: G9983-MIB.mib (73249 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB HC-PerfHist-TC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
mib-2 Unsigned32 Counter32
TEXTUAL-CONVENTION RowStatus TruthValue
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
ifIndex InterfaceIndex HCPerfCurrentCount
HCPerfIntervalCount HCPerfValidIntervals HCPerfInvalidIntervals
HCPerfTimeElapsed

Defined Types

G9983SvcIndex  
A unique value, greater than zero, for each service defined in the managed G.Bond/TDIM port. It is RECOMMENDED that values be assigned contiguously starting from 1. The value for each service MUST remain constant at least from one re-initialization of the local management subsystem to the next re-initialization.
TEXTUAL-CONVENTION    
  Unsigned32 1..255  

G9983SvcIndexList  
This textual convention represents a continuous ordered list of all the services defined for the managed G.Bond/TDIM port. The value of this object is a concatenation of zero or more (up to 60) octets, where each octet contains an 8-bit G9983SvcIndex value, identifying a particular service. An octet's position reflects the associated service position and its priority in the G.Bond/TDIM frame, with the first octet being the first service of highest priority. A zero-length octet string is object-specific and MUST therefore be defined as part of the description of any object that uses this syntax. Examples of the usage of a zero-length value might include situations where an object using this textual convention is irrelevant for a specific G.Bond/TDIM port type or where no services have been defined for this port.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..60)  

G9983SvcOrderIndex  
A unique value, greater than zero, for each service defined in the managed G.Bond/TDIM port, showing its relative position inside the G.Bond/TDIM frame.
TEXTUAL-CONVENTION    
  Unsigned32 1..60  

G9983PortConfEntry  
SEQUENCE    
  g9983PortConfFecAdminState TruthValue
  g9983PortConfFecWordSize Unsigned32
  g9983PortConfFecRedundancySize Unsigned32
  g9983PortConfFecInterleaverType INTEGER
  g9983PortConfFecInterleaverDepth Unsigned32
  g9983PortConfAdminServices G9983SvcIndexList
  g9983PortConfSvcUpDownEnable TruthValue

G9983PortCapEntry  
SEQUENCE    
  g9983PortCapFecSupported TruthValue
  g9983PortCapFecMaxWordSize Unsigned32
  g9983PortCapFecMaxRedundancySize Unsigned32
  g9983PortCapFecInterleaverTypeSupported INTEGER
  g9983PortCapFecMaxInterleaverDepth Unsigned32

G9983PortStatEntry  
SEQUENCE    
  g9983PortStatFecOperState TruthValue
  g9983PortStatFltStatus BITS
  g9983PortStatCrc4Errors Counter32
  g9983PortStatCrc6Errors Counter32
  g9983PortStatCrc8Errors Counter32

G9983OperSvcEntry  
SEQUENCE    
  g9983OperSvcPosition G9983SvcOrderIndex
  g9983OperSvcIdx G9983SvcIndex
  g9983OperSvcState INTEGER

G9983SvcEntry  
SEQUENCE    
  g9983SvcIdx G9983SvcIndex
  g9983SvcIfIdx InterfaceIndex
  g9983SvcType INTEGER
  g9983SvcSize Unsigned32
  g9983SvcRowStatus RowStatus

G9983PortPmCurEntry  
SEQUENCE    
  g9983PortPmCur15MinValidIntervals HCPerfValidIntervals
  g9983PortPmCur15MinInvalidIntervals HCPerfInvalidIntervals
  g9983PortPmCur15MinTimeElapsed HCPerfTimeElapsed
  g9983PortPmCur15MinCrc4s HCPerfCurrentCount
  g9983PortPmCur15MinCrc6s HCPerfCurrentCount
  g9983PortPmCur15MinCrc8s HCPerfCurrentCount
  g9983PortPmCur1DayValidIntervals Unsigned32
  g9983PortPmCur1DayInvalidIntervals Unsigned32
  g9983PortPmCur1DayTimeElapsed HCPerfTimeElapsed
  g9983PortPmCur1DayCrc4s HCPerfCurrentCount
  g9983PortPmCur1DayCrc6s HCPerfCurrentCount
  g9983PortPmCur1DayCrc8s HCPerfCurrentCount

G9983PortPm15MinEntry  
SEQUENCE    
  g9983PortPm15MinIntervalIndex Unsigned32
  g9983PortPm15MinIntervalMoniTime HCPerfTimeElapsed
  g9983PortPm15MinIntervalCrc4s HCPerfIntervalCount
  g9983PortPm15MinIntervalCrc6s HCPerfIntervalCount
  g9983PortPm15MinIntervalCrc8s HCPerfIntervalCount
  g9983PortPm15MinIntervalValid TruthValue

G9983PortPm1DayEntry  
SEQUENCE    
  g9983PortPm1DayIntervalIndex Unsigned32
  g9983PortPm1DayIntervalMoniTime HCPerfTimeElapsed
  g9983PortPm1DayIntervalCrc4s HCPerfIntervalCount
  g9983PortPm1DayIntervalCrc6s HCPerfIntervalCount
  g9983PortPm1DayIntervalCrc8s HCPerfIntervalCount
  g9983PortPm1DayIntervalValid TruthValue

G9983SvcPmCurEntry  
SEQUENCE    
  g9983SvcPmCur15MinValidIntervals HCPerfValidIntervals
  g9983SvcPmCur15MinInvalidIntervals HCPerfInvalidIntervals
  g9983SvcPmCur15MinTimeElapsed HCPerfTimeElapsed
  g9983SvcPmCur15MinDowns HCPerfCurrentCount
  g9983SvcPmCur1DayValidIntervals Unsigned32
  g9983SvcPmCur1DayInvalidIntervals Unsigned32
  g9983SvcPmCur1DayTimeElapsed HCPerfTimeElapsed
  g9983SvcPmCur1DayDowns HCPerfCurrentCount

G9983SvcPm15MinEntry  
SEQUENCE    
  g9983SvcPm15MinIntervalIndex Unsigned32
  g9983SvcPm15MinIntervalMoniTime HCPerfTimeElapsed
  g9983SvcPm15MinIntervalDowns HCPerfIntervalCount
  g9983SvcPm15MinIntervalValid TruthValue

G9983SvcPm1DayEntry  
SEQUENCE    
  g9983SvcPm1DayIntervalIndex Unsigned32
  g9983SvcPm1DayIntervalMoniTime HCPerfTimeElapsed
  g9983SvcPm1DayIntervalDowns HCPerfIntervalCount
  g9983SvcPm1DayIntervalValid TruthValue

Defined Values

g9983MIB 1.3.6.1.2.1.210
The objects in this MIB module are used to manage the multi-pair bonded xDSL interfaces using time-division inverse multiplexing (TDIM), as defined in ITU-T Recommendation G.998.3 (G.Bond/TDIM). This MIB module MUST be used in conjunction with the GBOND-MIB module, common to all G.Bond technologies. The following references are used throughout this MIB module: [G.998.3] refers to: ITU-T Recommendation G.998.3: 'Multi-pair bonding using time-division inverse multiplexing', January 2005. [TR-159] refers to: Broadband Forum Technical Report: 'Management Framework for xDSL Bonding', December 2008. Naming Conventions: BCE - Bonding Channel Entity BTU - Bonding Terminating Unit BTU-C - Bonding Terminating Unit, CO side BTU-R - Bonding Terminating Unit, Remote Terminal (CPE) side CO - Central Office CPE - Customer Premises Equipment GBS - Generic Bonding Sub-layer GBS-C - Generic Bonding Sub-layer, CO side GBS-R - Generic Bonding Sub-layer, Remote Terminal (CPE) side SNR - Signal to Noise Ratio Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
MODULE-IDENTITY    

g9983Objects 1.3.6.1.2.1.210.1
OBJECT IDENTIFIER    

g9983Conformance 1.3.6.1.2.1.210.2
OBJECT IDENTIFIER    

g9983Port 1.3.6.1.2.1.210.1.1
OBJECT IDENTIFIER    

g9983PortNotifications 1.3.6.1.2.1.210.1.1.0
OBJECT IDENTIFIER    

g9983SvcUp 1.3.6.1.2.1.210.1.1.0.1
This notification indicates that a service, indicated by the g9983OperSvcIdx (mapped to a particular interface indicated by the g9983SvcIfIdx), in a particular G.Bond/TDIM port is passing traffic. This notification is generated (unless disabled or dropped by the rate-limiting mechanism) when the g9983OperSvcState object has left the 'down' state, while the G.Bond/TDIM port state (the ifOperStatus of the IF-MIB) is 'up'. Generation of this notification is controlled by the g9983PortConfSvcUpDownEnable object. This object maps to the TR-159 notification nServiceUp.
Status: current Access: read-only
NOTIFICATION-TYPE    

g9983SvcDown 1.3.6.1.2.1.210.1.1.0.2
This notification indicates that a service indicated by the g9983OperSvcIdx (mapped to a particular interface indicated by the g9983SvcIfIdx) in a particular G.Bond/TDIM port has stopped passing traffic. This notification is generated (unless disabled or dropped by the rate-limiting mechanism), when the g9983OperSvcState object has entered the 'down' state, while the G.Bond/TDIM port state (the ifOperStatus of the IF-MIB) is 'up'. Generation of this notification is controlled by the g9983PortConfSvcUpDownEnable object. This object maps to the TR-159 notification nServiceDown.
Status: current Access: read-only
NOTIFICATION-TYPE    

g9983PortConfTable 1.3.6.1.2.1.210.1.1.1
Table for configuration of G.Bond/TDIM ports. Entries in this table MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    G9983PortConfEntry

g9983PortConfEntry 1.3.6.1.2.1.210.1.1.1.1
An entry in the G.Bond/TDIM Port Configuration table. Each entry represents a G.Bond/TDIM port indexed by the ifIndex. Additional configuration parameters are available via the gBondPortConfEntry of the GBOND-MIB. Note that a G.Bond/TDIM port runs on top of a single or multiple BCE port(s), which are also indexed by the ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  G9983PortConfEntry  

g9983PortConfFecAdminState 1.3.6.1.2.1.210.1.1.1.1.1
A desired state of the OPTIONAL Forward Error Correction (FEC) function of the G.Bond/TDIM port. A value of 'false' indicates that the FEC function SHALL be disabled. A value of 'true' indicates that the FEC function SHALL be enabled, if supported by the G.Bond/TDIM port, as indicated by the g9983PortCapFecSupported object. The g9983PortStatFecOperState object indicates the current operational state of the FEC function. For the GBS-R ports, the value of this object cannot be changed directly. This value may be changed as a result of a write operation on the g9983PortCapFecSupported object of a remote GBS-C. Modifications of this object MUST be performed when the link is 'down'. Attempts to change this object MUST be rejected if the link is 'up' or initializing, or if it is a GBS-R. This object maps to the TR-159/G.998.3 attribute aFECAdminState.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

g9983PortConfFecWordSize 1.3.6.1.2.1.210.1.1.1.1.2
A FEC code word size, in octets, for G.Bond/TDIM ports supporting the FEC function. This object is read-write for the GBS-C ports and read-only for the GBS-R. A value of zero SHALL be returned if the FEC function is disabled (via g9983PortConfFecAdminState) or not supported. Changing of the FEC code word size MUST be performed when the FEC-enabled link is 'down'. Attempts to change this object MUST be rejected if the link is 'up' or initializing or if the FEC function is disabled/not supported. This object maps to the TR-159/G.998.3 attribute aFECWordSize.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 20..255  

g9983PortConfFecRedundancySize 1.3.6.1.2.1.210.1.1.1.1.3
A FEC redundancy word size, in octets, for G.Bond/TDIM ports supporting the FEC function. This object is read-write for the GBS-C ports and read-only for the GBS-R. A value of zero SHALL be returned if the FEC function is disabled (via g9983PortConfFecAdminState) or not supported. Changing of the FEC redundancy word size MUST be performed when the FEC-enabled link is 'down'. Attempts to change this object MUST be rejected if the link is 'up' or initializing or if the FEC function is disabled/not supported. This object maps to the TR-159/G.998.3 attribute aFECRedundancySize.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 2 | 4 | 8 | 16 | 20  

g9983PortConfFecInterleaverType 1.3.6.1.2.1.210.1.1.1.1.4
An Interleaver type for G.Bond/TDIM ports supporting the FEC function. This object is read-write for the GBS-C ports and read-only for the GBS-R. A value of none(0) SHALL be returned if the FEC function is disabled (via g9983PortConfFecAdminState) or not supported. Changing of the Interleaver type MUST be performed when the FEC-enabled link is 'down'. Attempts to change this object MUST be rejected if the link is 'up' or initializing or if the FEC function is disabled/not supported. This object maps to the TR-159/G.998.3 attribute aFECInterleaverType.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), block(1), convolution(2)  

g9983PortConfFecInterleaverDepth 1.3.6.1.2.1.210.1.1.1.1.5
An Interleaver depth for G.Bond/TDIM ports supporting the FEC function. This object is read-write for the GBS-C ports and read-only for the GBS-R. A value of zero SHALL be returned if the FEC function is disabled (via g9983PortConfFecAdminState) or not supported. Changing of the Interleaver depth MUST be performed when the FEC-enabled link is 'down'. Attempts to change this object MUST be rejected if the link is 'up' or initializing or if the FEC function is disabled/not supported. This object maps to the TR-159/G.998.3 attribute aFECInterleaverDepth.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1 | 2 | 3 | 4 | 6 | 8 | 12 | 16 | 24 | 32 | 48 | 96  

g9983PortConfAdminServices 1.3.6.1.2.1.210.1.1.1.1.6
Desired list of services for a G.Bond/TDIM port. This object is a list of pointers to entries in the g9983SvcTable. The value of this object is a continuous ordered list of up to 60 indices (g9983SvcIdx) of the active services carried via the G.Bond/TDIM link. The position of a service in the list determines its relative priority in cases of bandwidth degradation -- the priority decreases towards the end of the list, which means that the last service in the list would be suspended first when the bandwidth degrades. This object is writable and readable for the GBS-C ports. It is irrelevant for the GBS-R ports -- a zero-length octet string SHALL be returned on an attempt to read this object, and an attempt to change this object MUST be rejected in this case. Note that the current operational service list is available via the g9983OperSvcTable object. This object for a GBS-C port MAY be modified independently of the link's state, i.e., in-service and out-of-service. Attempts to set this object to a list with a member value that is not the value of the index for an active entry in the corresponding g9983SvcTable table MUST be rejected.
Status: current Access: read-write
OBJECT-TYPE    
  G9983SvcIndexList  

g9983PortConfSvcUpDownEnable 1.3.6.1.2.1.210.1.1.1.1.7
Indicates whether g9983SvcUp and g9983SvcDown notifications should be generated for this interface. A value of true(1) indicates that the notifications are enabled. A value of false(2) indicates that the notifications are disabled. This object maps to the TR-159 attribute aServiceUpDownEnable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

g9983PortCapTable 1.3.6.1.2.1.210.1.1.2
Table for capabilities of G.Bond/TDIM ports. Entries in this table MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    G9983PortCapEntry

g9983PortCapEntry 1.3.6.1.2.1.210.1.1.2.1
An entry in the G.Bond/TDIM Port Capability table. Each entry represents a G.Bond/TDIM port indexed by the ifIndex. Additional capabilities are available via the gBondPortCapabilityEntry of the GBOND-MIB. Note that a G.Bond/TDIM port runs on top of a single or multiple BCE port(s), which are also indexed by the ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  G9983PortCapEntry  

g9983PortCapFecSupported 1.3.6.1.2.1.210.1.1.2.1.1
FEC and Interleaver capability of the G.Bond/TDIM port. This object has a value of true(1) when the port supports the FEC and Interleaver function. A value of false(2) is returned when the port does not support the FEC and Interleaver function. This object maps to the TR-159/G.998.3 attribute aFECSupported.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

g9983PortCapFecMaxWordSize 1.3.6.1.2.1.210.1.1.2.1.2
A maximum supported FEC code word size, in octets, for G.Bond/TDIM ports supporting the FEC function. A value of zero SHALL be returned if the FEC function is not supported. This object maps to the TR-159 attribute aFECWordSize.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 20..255  

g9983PortCapFecMaxRedundancySize 1.3.6.1.2.1.210.1.1.2.1.3
A maximum supported FEC redundancy word size, in octets, for G.Bond/TDIM ports supporting the FEC function. A value of zero SHALL be returned if the FEC function is not supported. This object maps to the TR-159 attribute aFECMaxRedundancySize.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 2 | 4 | 8 | 16 | 20  

g9983PortCapFecInterleaverTypeSupported 1.3.6.1.2.1.210.1.1.2.1.4
Supported Interleaver types for G.Bond/TDIM ports supporting the FEC function. Possible values are: none - the port does not support interleaving block - the port supports Block Interleaver convolution - the port supports Convolution Interleaver blockConvolution - the port supports both Block Interleaver and Convolution Interleaver This object maps to the TR-159 attribute aFECInterleaverTypesSupported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), block(1), convolution(2), blockConvolution(3)  

g9983PortCapFecMaxInterleaverDepth 1.3.6.1.2.1.210.1.1.2.1.5
A maximum Interleaver depth for G.Bond/TDIM ports supporting the FEC function. A value of zero SHALL be returned if the Interleaver is not supported. This object maps to the TR-159 attribute aFECMaxInterleaverDepth.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 1 | 2 | 3 | 4 | 6 | 8 | 12 | 16 | 24 | 32 | 48 | 96  

g9983PortStatTable 1.3.6.1.2.1.210.1.1.3
This table provides overall status information of G.Bond TDIM ports, complementing the generic status information from the ifTable of the IF-MIB and the gBondPortStatFltStatus of the GBOND-MIB. Additional status information about connected BCEs is available from the relevant line MIBs. This table contains live data from the equipment. As such, it is NOT persistent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    G9983PortStatEntry

g9983PortStatEntry 1.3.6.1.2.1.210.1.1.3.1
An entry in the G.Bond/TDIM Port Status table. Each entry represents a G.Bond/TDIM port indexed by the ifIndex. Note that a G.Bond GBS port runs on top of a single or multiple BCE port(s), which are also indexed by the ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  G9983PortStatEntry  

g9983PortStatFecOperState 1.3.6.1.2.1.210.1.1.3.1.1
A read-only value indicating the current operational state of the OPTIONAL Forward Error Correction (FEC) function for the G.998.3 port. A value of 'false' indicates that the FEC function is disabled. A value of 'true' indicates that the FEC function is enabled (and supported). This object maps to the TR-159 attribute aFECOperState.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

g9983PortStatFltStatus 1.3.6.1.2.1.210.1.1.3.1.2
G.Bond/TDIM port fault status. This is a bitmap of possible conditions. The various bit positions are: serviceDown - at least one of the services defined for this aggregation group is down (due to low rate). wrongConfig - at least one BCE at the remote GBS-R is already connected to another GBS. This object is intended to supplement the ifOperStatus object in the IF-MIB and the gBondPortStatFltStatus object in the GBOND-MIB.
Status: current Access: read-only
OBJECT-TYPE    
  BITS serviceDown(0), wrongConfig(1)  

g9983PortStatCrc4Errors 1.3.6.1.2.1.210.1.1.3.1.3
The total number of CRC-4 errors (frame header errors) on all pairs in the G.Bond/TDIM port. Simultaneous errors on M lines SHOULD be counted M times. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime as defined in the IF-MIB. This object maps to the TR-159/G.998.3 attribute aCRC4Errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

g9983PortStatCrc6Errors 1.3.6.1.2.1.210.1.1.3.1.4
The total number of CRC-6 errors (super-frame errors) on all pairs in the G.Bond/TDIM port. Simultaneous errors on M lines SHOULD be counted 1 time. Discontinuities in the value of this counter can occur at re-initialization of the local management subsystem, and at other times as indicated by the value of ifCounterDiscontinuityTime as defined in the IF-MIB. This object maps to the TR-159/G.998.3 attribute aCRC6Errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

g9983PortStatCrc8Errors 1.3.6.1.2.1.210.1.1.3.1.5
The total number of CRC-8 errors (event/message errors) on all pairs in the G.Bond/TDIM port. Simultaneous errors on M lines SHOULD be counted M times. Discontinuities in the value of this counter can occur at re-initialization of the local management subsystem, and at other times as indicated by the value of ifCounterDiscontinuityTime as defined in the IF-MIB. This object maps to the TR-159/G.998.3 attribute aCRC8Errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

g9983OperSvcTable 1.3.6.1.2.1.210.1.1.4
Table of the operational services configured on a G.Bond/TDIM port. This table reflects current actual service configuration, set by the g9983PortConfAdminServices object. The number of entries (services) in this table therefore can vary between 0, when no services are configured, and 60, for the maximum number of services. This table contains live data from the equipment. As such, it is NOT persistent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    G9983OperSvcEntry

g9983OperSvcEntry 1.3.6.1.2.1.210.1.1.4.1
An entry in the G.Bond/TDIM Port Operational Service table, containing the index of an active service entry in the g9983SvcTable. The entry is indexed by the ifIndex, indicating a corresponding G.Bond/TDIM port, and by g9983OperSvcPosition (1..60), indicating the corresponding service position in the G.Bond/TDIM frame.
Status: current Access: not-accessible
OBJECT-TYPE    
  G9983OperSvcEntry  

g9983OperSvcPosition 1.3.6.1.2.1.210.1.1.4.1.1
G.Bond/TDIM operational service position -- a unique index, indicating relative placement of the associated service pointed to by g9983OperSvcIdx, within the G.Bond/TDIM frame. There can be up to 60 services defined over a TDIM bonded facility. Services with lower indices have higher priority in cases of bandwidth degradation. The value of g9983OperSvcPosition for the first g9983OperSvcEntry is always 1, incrementing sequentially for each consecutive entry, i.e., 2 for the second entry, 3 for the third, etc. This objects maps to the TR-159/G.998.3 attribute aServiceID.
Status: current Access: not-accessible
OBJECT-TYPE    
  G9983SvcOrderIndex  

g9983OperSvcIdx 1.3.6.1.2.1.210.1.1.4.1.2
G.Bond/TDIM operational service index -- a read-only pointer to an existing entry in the g9983SvcTable (value of g9983SvcIdx) describing a particular service.
Status: current Access: read-only
OBJECT-TYPE    
  G9983SvcIndex  

g9983OperSvcState 1.3.6.1.2.1.210.1.1.4.1.3
G.Bond/TDIM service operational state. Possible values are: up - Service is up and passing traffic. down - Service is down, due to a variety of reasons, e.g., G.Bond/TDIM port is down, current link bandwidth is too low to support a particular service, etc. This objects maps to the TR-159 attribute aServiceOperState.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

g9983SvcTable 1.3.6.1.2.1.210.1.1.5
Table of possible services for G.Bond/TDIM ports. Entries in this table MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    G9983SvcEntry

g9983SvcEntry 1.3.6.1.2.1.210.1.1.5.1
An entry in the G.Bond/TDIM Port Service table, containing the management information applicable to a particular service, indexed by the g9983SvcIdx, on a G.Bond/TDIM port, indexed by the ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  G9983SvcEntry  

g9983SvcIdx 1.3.6.1.2.1.210.1.1.5.1.1
G.Bond/TDIM service index -- a unique index associated with a particular service entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  G9983SvcIndex  

g9983SvcIfIdx 1.3.6.1.2.1.210.1.1.5.1.2
This is a unique index within the ifTable. It represents the interface index of a service to be transmitted over the G.Bond/TDIM service instance. This objects maps to the TR-159 attribute aServiceIfIndex.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

g9983SvcType 1.3.6.1.2.1.210.1.1.5.1.3
G.Bond/TDIM service type. Possible values are: ds1 - Clear Channel DS1 (synchronous) e1 - Clear Channel E1 (synchronous) nxds0 - Fractional DS1 (synchronous) nxe0 - Fractional E1 (synchronous) ds3 - DS3 (synchronous) e3 - E3 (synchronous) clock - Clock transfer (synchronous) ethernet - Ethernet (asynchronous) atm - ATM (asynchronous) gfpNoFCS - GFP encapsulated without FCS (asynchronous) gfp - GFP encapsulated with FCS (asynchronous) For the GBS-R ports, the value of this object cannot be changed directly. This value may be changed as a result of a write operation on the g9983SvcType object of a remote GBS-C. Attempts to change this object MUST be rejected for the GBS-R ports. This object maps to the TR-159/G.998.3 attribute aServiceType.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ds1(0), e1(1), nxds0(2), nxe0(3), ds3(4), e3(5), clock(6), ethernet(7), atm(8), gfpNoFCS(9), gfp(10)  

g9983SvcSize 1.3.6.1.2.1.210.1.1.5.1.4
Service size, in octets, per bonding sub-block for a specific service identified by g9983SvcIdx. For TDM (synchronous) services with variable size (e.g., fractional DS1/E1), this object represents the number of DS0/E0 channels. For asynchronous services (Ethernet, ATM, GFPnoFCS, or GFP), this object represents the maximum number of octets. For non-fractional TDM services (i.e., DS1, E1, DS3, E3, and clock), the value of this object MUST be 0. A GET operation returns the current value. A SET operation, allowed on GBS-C ports, changes the service size to the indicated value. If the service type is a fixed-rate synchronous service (g9983SvcType is nxds0, nxe0, ds1, e1, ds3, e3, or clock), the operation MUST be rejected. This object maps to the TR-159/G.998.3 attribute aServiceSize.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 20..255  

g9983SvcRowStatus 1.3.6.1.2.1.210.1.1.5.1.5
This object controls the creation, modification, or deletion of the associated entry in the g9983SvcTable per the semantics of RowStatus. If an 'active' entry is referenced via g9983OperSvcIdx or a g9983PortConfAdminServices instance, or indexes a g9983SvcPm*Entry, the entry MUST remain 'active'. An 'active' entry SHALL NOT be modified. In order to modify an existing entry, it MUST be taken out of service (by setting this object to 'notInService'), modified, and set to 'active' again.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

g9983PM 1.3.6.1.2.1.210.1.1.6
OBJECT IDENTIFIER    

g9983PortPmCurTable 1.3.6.1.2.1.210.1.1.6.1
This table contains current Performance Monitoring information for a G.Bond/TDIM port. This table contains live data from the equipment and as such is NOT persistent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    G9983PortPmCurEntry

g9983PortPmCurEntry 1.3.6.1.2.1.210.1.1.6.1.1
An entry in the G.Bond/TDIM Port PM table. Each entry represents a G.Bond/TDIM port indexed by the ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  G9983PortPmCurEntry  

g9983PortPmCur15MinValidIntervals 1.3.6.1.2.1.210.1.1.6.1.1.1
A read-only number of 15-minute intervals for which the performance data was collected. The value of this object will be 96 or the maximum number of 15-minute history intervals collected by the implementation, unless the measurement was (re)started recently, in which case the value will be the number of complete 15-minute intervals for which there are at least some data. In certain cases, it is possible that some intervals are unavailable. In this case, this object reports the maximum interval number for which data is available. This object partially maps to the TR-159 attribute aGroupPerf15MinValidIntervals.
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfValidIntervals  

g9983PortPmCur15MinInvalidIntervals 1.3.6.1.2.1.210.1.1.6.1.1.2
A read-only number of 15-minute intervals for which the performance data was not always available. The value will typically be zero, except in cases where the data for some intervals are not available. This object partially maps to the TR-159 attribute aGroupPerf15MinInvalidIntervals.
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfInvalidIntervals  

g9983PortPmCur15MinTimeElapsed 1.3.6.1.2.1.210.1.1.6.1.1.3
A read-only count of seconds that have elapsed since the beginning of the current 15-minute performance interval. This object partially maps to the TR-159 attribute aGroupPerfCurr15MinTimeElapsed.
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfTimeElapsed  

g9983PortPmCur15MinCrc4s 1.3.6.1.2.1.210.1.1.6.1.1.4
A read-only count of CRC-4 errors (frame header errors) on all active pairs in the G.Bond/TDIM port during the current 15-minute performance interval. Simultaneous errors on M lines SHOULD be counted M times. Note that the total number of CRC-4 errors is indicated by the g9983PortStatCrc4Errors object. This object is inhibited during Severely Errored Seconds (SES) or Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfCurrentCount  

g9983PortPmCur15MinCrc6s 1.3.6.1.2.1.210.1.1.6.1.1.5
A read-only count of CRC-6 errors (super-frame errors) on all active pairs in the G.Bond/TDIM port during the current 15-minute performance interval. Simultaneous errors on M lines SHOULD be counted 1 time. Note that the total number of CRC-6 errors is indicated by the g9983PortStatCrc6Errors object. This object is inhibited during Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfCurrentCount  

g9983PortPmCur15MinCrc8s 1.3.6.1.2.1.210.1.1.6.1.1.6
A read-only count of CRC-8 errors (event/message errors) on all active pairs in the G.Bond/TDIM port during the current 15-minute performance interval. Simultaneous errors on M lines SHOULD be counted M times. Note that the total number of CRC-8 errors is indicated by the g9983PortStatCrc8Errors object. This object is inhibited during Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfCurrentCount  

g9983PortPmCur1DayValidIntervals 1.3.6.1.2.1.210.1.1.6.1.1.7
A read-only number of 1-day intervals for which data was collected. The value of this object will be 7 or the maximum number of 1-day history intervals collected by the implementation, unless the measurement was (re)started recently, in which case the value will be the number of complete 1-day intervals for which there are at least some data. In certain cases, it is possible that some intervals are unavailable. In this case, this object reports the maximum interval number for which data is available.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

g9983PortPmCur1DayInvalidIntervals 1.3.6.1.2.1.210.1.1.6.1.1.8
A read-only number of 1-day intervals for which data was not always available. The value will typically be zero, except in cases where the data for some intervals are not available.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

g9983PortPmCur1DayTimeElapsed 1.3.6.1.2.1.210.1.1.6.1.1.9
A read-only count of seconds that have elapsed since the beginning of the current 1-day performance interval.
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfTimeElapsed  

g9983PortPmCur1DayCrc4s 1.3.6.1.2.1.210.1.1.6.1.1.10
A read-only count of CRC-4 errors on the G.Bond/TDIM port in the current 1-day performance interval. This object is inhibited during Severely Errored Seconds (SES) and Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfCurrentCount  

g9983PortPmCur1DayCrc6s 1.3.6.1.2.1.210.1.1.6.1.1.11
A read-only count of CRC-6 errors on the G.Bond/TDIM port in the current 1-day performance interval. This object is inhibited during Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfCurrentCount  

g9983PortPmCur1DayCrc8s 1.3.6.1.2.1.210.1.1.6.1.1.12
A read-only count of CRC-8 errors on the G.Bond/TDIM port in the current 1-day performance interval. This object is inhibited during Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfCurrentCount  

g9983PortPm15MinTable 1.3.6.1.2.1.210.1.1.6.2
This table contains historical 15-minute buckets of Performance Monitoring information for a G.Bond/TDIM port (a row for each 15-minute interval, up to 96 intervals). Entries in this table MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    G9983PortPm15MinEntry

g9983PortPm15MinEntry 1.3.6.1.2.1.210.1.1.6.2.1
An entry in the G.Bond/TDIM Port historical 15-minute PM table. Each entry represents Performance Monitoring data for a G.Bond TDIM port, indexed by the ifIndex, collected during a particular 15-minute interval, indexed by the g9983PortPm15MinIntervalIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  G9983PortPm15MinEntry  

g9983PortPm15MinIntervalIndex 1.3.6.1.2.1.210.1.1.6.2.1.1
Performance data interval number. 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are OPTIONAL. This object partially maps to the TR-159 attribute aGroupPerf15MinIntervalNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..96  

g9983PortPm15MinIntervalMoniTime 1.3.6.1.2.1.210.1.1.6.2.1.2
A read-only count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (900 seconds), except in a situation where performance data could not be collected for any reason.
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfTimeElapsed  

g9983PortPm15MinIntervalCrc4s 1.3.6.1.2.1.210.1.1.6.2.1.3
A read-only count of CRC-4 errors on the G.Bond/TDIM port during the 15-minute performance history interval. This object is inhibited during Severely Errored Seconds (SES) and Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfIntervalCount  

g9983PortPm15MinIntervalCrc6s 1.3.6.1.2.1.210.1.1.6.2.1.4
A read-only count of CRC-6 errors on the G.Bond/TDIM port during the 15-minute performance history interval. This object is inhibited during Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfIntervalCount  

g9983PortPm15MinIntervalCrc8s 1.3.6.1.2.1.210.1.1.6.2.1.5
A read-only count of CRC-8 errors on the G.Bond/TDIM port during the current 15-minute performance interval. This object is inhibited during Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfIntervalCount  

g9983PortPm15MinIntervalValid 1.3.6.1.2.1.210.1.1.6.2.1.6
A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). If this history bucket is invalid, the BTU-C MUST NOT produce notifications based upon the value of the counters in this bucket. Note that an implementation may decide not to store invalid history buckets in its database. In such a case, this object is not required, as only valid history buckets are available while invalid history buckets are simply not in the database. This object partially maps to the TR-159 attribute aGroupPerf15MinIntervalValid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

g9983PortPm1DayTable 1.3.6.1.2.1.210.1.1.6.3
This table contains historical 1-day buckets of Performance Monitoring information for a G.Bond/TDIM port (a row for each 1-day interval, up to 7 intervals). Entries in this table MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    G9983PortPm1DayEntry

g9983PortPm1DayEntry 1.3.6.1.2.1.210.1.1.6.3.1
An entry in the G.Bond/TDIM Port historical 1-day PM table. Each entry represents Performance Monitoring data for such a port, indexed by the ifIndex, collected during a particular 1-day interval, indexed by the g9983PortPm1DayIntervalIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  G9983PortPm1DayEntry  

g9983PortPm1DayIntervalIndex 1.3.6.1.2.1.210.1.1.6.3.1.1
Performance data interval number. 1 is the most recent previous interval; interval 7 is 7 days ago. Intervals 2..7 are OPTIONAL. This object partially maps to the TR-159 attribute aGroupPerf1DayIntervalNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..7  

g9983PortPm1DayIntervalMoniTime 1.3.6.1.2.1.210.1.1.6.3.1.2
A read-only count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (86400 seconds), except in a situation where performance data could not be collected for any reason. This object partially maps to the TR-159 attribute aGroupPerf1DayIntervalMoniSecs.
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfTimeElapsed  

g9983PortPm1DayIntervalCrc4s 1.3.6.1.2.1.210.1.1.6.3.1.3
A read-only count of CRC-4 errors on the G.Bond/TDIM port during the 1-day performance history interval. This object is inhibited during Severely Errored Seconds (SES) and Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfIntervalCount  

g9983PortPm1DayIntervalCrc6s 1.3.6.1.2.1.210.1.1.6.3.1.4
A read-only count of CRC-6 errors on the G.Bond/TDIM port during the 1-day performance history interval. This object is inhibited during Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfIntervalCount  

g9983PortPm1DayIntervalCrc8s 1.3.6.1.2.1.210.1.1.6.3.1.5
A read-only count of CRC-8 errors on the G.Bond/TDIM port during the current 1-day performance interval. This object is inhibited during Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfIntervalCount  

g9983PortPm1DayIntervalValid 1.3.6.1.2.1.210.1.1.6.3.1.6
A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). If this history bucket is invalid, the BTU-C MUST NOT produce notifications based upon the value of the counters in this bucket. Note that an implementation may decide not to store invalid history buckets in its database. In such a case, this object is not required, as only valid history buckets are available while invalid history buckets are simply not in the database. This object partially maps to the TR-159 attribute aGroupPerf1DayIntervalValid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

g9983SvcPmCurTable 1.3.6.1.2.1.210.1.1.6.4
This table contains current Performance Monitoring information for the services of a G.Bond/TDIM port. This table contains live data from the equipment and as such is NOT persistent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    G9983SvcPmCurEntry

g9983SvcPmCurEntry 1.3.6.1.2.1.210.1.1.6.4.1
An entry in the G.Bond/TDIM Services PM table. Each entry represents a service, indexed by the g9983SvcIdx, in a G.Bond/TDIM port, indexed by the ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  G9983SvcPmCurEntry  

g9983SvcPmCur15MinValidIntervals 1.3.6.1.2.1.210.1.1.6.4.1.1
A read-only number of 15-minute intervals for which the performance data was collected. The value of this object will be 96 or the maximum number of 15-minute history intervals collected by the implementation, unless the measurement was (re)started recently, in which case the value will be the number of complete 15-minute intervals for which there are at least some data. In certain cases, it is possible that some intervals are unavailable. In this case, this object reports the maximum interval number for which data is available. This object partially maps to the TR-159 attribute aGroupPerf15MinValidIntervals.
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfValidIntervals  

g9983SvcPmCur15MinInvalidIntervals 1.3.6.1.2.1.210.1.1.6.4.1.2
A read-only number of 15-minute intervals for which the performance data was not always available. The value will typically be zero, except in cases where the data for some intervals are not available. This object partially maps to the TR-159 attribute aGroupPerf15MinInvalidIntervals.
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfInvalidIntervals  

g9983SvcPmCur15MinTimeElapsed 1.3.6.1.2.1.210.1.1.6.4.1.3
A read-only count of seconds that have elapsed since the beginning of the current 15-minute performance interval. This object partially maps to the TR-159 attribute aGroupPerfCurr15MinTimeElapsed.
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfTimeElapsed  

g9983SvcPmCur15MinDowns 1.3.6.1.2.1.210.1.1.6.4.1.4
A read-only count of seconds in the current 15-minute performance interval during which a particular TDIM service was 'down', as indicated by the g9983OperSvcState object. This object is inhibited during Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfCurrentCount  

g9983SvcPmCur1DayValidIntervals 1.3.6.1.2.1.210.1.1.6.4.1.5
A read-only number of 1-day performance history intervals for which the data was collected. The value of this object will be 7 or the maximum number of 1-day history intervals collected by the implementation, unless the measurement was (re)started recently, in which case the value will be the number of complete 1-day intervals for which there are at least some data. In certain cases, it is possible that some intervals are unavailable. In this case, this object reports the maximum interval number for which data is available.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

g9983SvcPmCur1DayInvalidIntervals 1.3.6.1.2.1.210.1.1.6.4.1.6
A read-only number of 1-day performance history intervals for which the performance data was not always available. The value will typically be zero, except in cases where the data for some intervals are not available.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

g9983SvcPmCur1DayTimeElapsed 1.3.6.1.2.1.210.1.1.6.4.1.7
A read-only count of seconds that have elapsed since the beginning of the current 1-day performance interval.
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfTimeElapsed  

g9983SvcPmCur1DayDowns 1.3.6.1.2.1.210.1.1.6.4.1.8
A read-only count of seconds in the current 1-day performance interval during which a particular TDIM service was 'down', as indicated by the g9983OperSvcState object. This object is inhibited during Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfCurrentCount  

g9983SvcPm15MinTable 1.3.6.1.2.1.210.1.1.6.5
This table contains historical 15-minute buckets of Performance Monitoring information for the services of a G.Bond/TDIM port (a multi-dimensional row for each 15-minute interval, up to 96 intervals). Entries in this table MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    G9983SvcPm15MinEntry

g9983SvcPm15MinEntry 1.3.6.1.2.1.210.1.1.6.5.1
An entry in the G.Bond/TDIM Service historical 15-minute PM table. Each entry represents Performance Monitoring data for a particular service, indexed by the g9983SvcIdx, in a G.Bond TDIM port, indexed by the ifIndex, collected during a particular 15-minute interval, indexed by the g9983SvcPm15MinIntervalIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  G9983SvcPm15MinEntry  

g9983SvcPm15MinIntervalIndex 1.3.6.1.2.1.210.1.1.6.5.1.1
Performance data interval number. 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are OPTIONAL. This object partially maps to the TR-159 attribute aGroupPerf15MinIntervalNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..96  

g9983SvcPm15MinIntervalMoniTime 1.3.6.1.2.1.210.1.1.6.5.1.2
A read-only count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (900 seconds), except in a situation where performance data could not be collected for any reason.
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfTimeElapsed  

g9983SvcPm15MinIntervalDowns 1.3.6.1.2.1.210.1.1.6.5.1.3
A read-only count of seconds in the 15-minute performance history interval during which a particular TDIM service was 'down', as indicated by the g9983OperSvcState object. This object is inhibited during Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfIntervalCount  

g9983SvcPm15MinIntervalValid 1.3.6.1.2.1.210.1.1.6.5.1.4
A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). If this history bucket is invalid, the BTU-C MUST NOT produce notifications based upon the value of the counters in this bucket. Note that an implementation may decide not to store invalid history buckets in its database. In such a case, this object is not required, as only valid history buckets are available while invalid history buckets are simply not in the database. This object partially maps to the TR-159 attribute aGroupPerf15MinIntervalValid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

g9983SvcPm1DayTable 1.3.6.1.2.1.210.1.1.6.6
This table contains historical 1-day buckets of Performance Monitoring information for the services of a G.Bond/TDIM port (a multi-dimensional row for each 1-day interval, up to 7 intervals). Entries in this table MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    G9983SvcPm1DayEntry

g9983SvcPm1DayEntry 1.3.6.1.2.1.210.1.1.6.6.1
An entry in the G.Bond/TDIM Service historical 1-day PM table. Each entry represents Performance Monitoring data for a particular service, indexed by the g9983SvcIdx, defined in a G.Bond/TDIM port, indexed by the ifIndex, collected during a particular 1-day interval, indexed by the g9983SvcPm1DayIntervalIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  G9983SvcPm1DayEntry  

g9983SvcPm1DayIntervalIndex 1.3.6.1.2.1.210.1.1.6.6.1.1
Performance data interval number. 1 is the most recent previous interval; interval 7 is 7 days ago. Intervals 2..7 are OPTIONAL. This object partially maps to the TR-159 attribute aGroupPerf1DayIntervalNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..7  

g9983SvcPm1DayIntervalMoniTime 1.3.6.1.2.1.210.1.1.6.6.1.2
A read-only count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (86400 seconds), except in a situation where performance data could not be collected for any reason. This object partially maps to the TR-159 attribute aGroupPerf1DayIntervalMoniSecs.
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfTimeElapsed  

g9983SvcPm1DayIntervalDowns 1.3.6.1.2.1.210.1.1.6.6.1.3
A read-only count of seconds in the 1-day performance history interval during which a particular TDIM service was 'down', as indicated by the g9983OperSvcState object. This object is inhibited during Unavailable Seconds (UAS).
Status: current Access: read-only
OBJECT-TYPE    
  HCPerfIntervalCount  

g9983SvcPm1DayIntervalValid 1.3.6.1.2.1.210.1.1.6.6.1.4
A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). If this history bucket is invalid, the BTU-C MUST NOT produce notifications based upon the value of the counters in this bucket. Note that an implementation may decide not to store invalid history buckets in its database. In such a case, this object is not required, as only valid history buckets are available while invalid history buckets are simply not in the database. This object partially maps to the TR-159 attribute aGroupPerf1DayIntervalValid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

g9983Groups 1.3.6.1.2.1.210.2.1
OBJECT IDENTIFIER    

g9983Compliances 1.3.6.1.2.1.210.2.2
OBJECT IDENTIFIER    

g9983BasicGroup 1.3.6.1.2.1.210.2.1.1
A collection of objects representing management information for G.Bond/TDIM ports.
Status: current Access: read-only
OBJECT-GROUP    

g9983FecGroup 1.3.6.1.2.1.210.2.1.2
A collection of objects supporting the OPTIONAL Forward Error Correction (FEC) and Interleaver function in G.Bond/TDIM ports.
Status: current Access: read-only
OBJECT-GROUP    

g9983AlarmConfGroup 1.3.6.1.2.1.210.2.1.3
A collection of objects required for configuration of alarm thresholds and notifications in G.Bond/TDIM ports.
Status: current Access: read-only
OBJECT-GROUP    

g9983NotificationGroup 1.3.6.1.2.1.210.2.1.4
This group supports notifications of significant conditions associated with G.Bond/TDIM ports.
Status: current Access: read-only
NOTIFICATION-GROUP    

g9983PerfCurrGroup 1.3.6.1.2.1.210.2.1.5
A collection of objects supporting OPTIONAL current Performance Monitoring information for G.Bond/TDIM ports.
Status: current Access: read-only
OBJECT-GROUP    

g9983Perf15MinGroup 1.3.6.1.2.1.210.2.1.6
A collection of objects supporting OPTIONAL historical Performance Monitoring information for G.Bond/TDIM ports, during previous 15-minute intervals.
Status: current Access: read-only
OBJECT-GROUP    

g9983Perf1DayGroup 1.3.6.1.2.1.210.2.1.7
A collection of objects supporting OPTIONAL historical Performance Monitoring information for G.Bond/TDIM ports, during previous 1-day intervals.
Status: current Access: read-only
OBJECT-GROUP    

g9983Compliance 1.3.6.1.2.1.210.2.2.1
The compliance statement for G.Bond/TDIM interfaces. Compliance with the following external compliance statements is REQUIRED: MIB Module Compliance Statement ---------- -------------------- IF-MIB ifCompliance3 GBOND-MIB gBondCompliance
Status: current Access: read-only
MODULE-COMPLIANCE