H3C-DOT11-WIDS-MIB

File: H3C-DOT11-WIDS-MIB.mib (87936 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI H3C-DOT11-REF-MIB

Imported symbols

TruthValue MacAddress RowStatus
DateAndTime TEXTUAL-CONVENTION MODULE-IDENTITY
OBJECT-TYPE NOTIFICATION-TYPE Integer32
Unsigned32 TimeTicks h3cDot11
H3cDot11SSIDStringType H3cDot11ChannelScopeType H3cDot11RadioScopeType
H3cDot11ObjectIDType H3cDot11RadioType

Defined Types

H3cDot11WIDSDevType  
The type of device detected.
TEXTUAL-CONVENTION    
  INTEGER client(1), ap(2), adhoc(3), wirelessBridge(4), unknown(5)  

H3cDot11WIDSDevPermitType  
Represents whether the detected device is permitted or a rogue.
TEXTUAL-CONVENTION    
  INTEGER permit(1), rogue(2)  

H3cDot11WIDSAtkType  
The type of attack. This object has following defined values: 'act': Action Frame 'asr': Association Request 'aur': Authentication Request 'daf': Deauthentication Frame 'dar': Disassociation Request 'ndf': Null Data Frame 'pbr': Probe Request 'rar': Reassociation Request 'saf': Spoofed Disassociation Frame 'sdf': Spoofed Deauthentication Frame 'wiv': Weak IV Detected
TEXTUAL-CONVENTION    
  INTEGER act(1), asr(2), aur(3), daf(4), dar(5), ndf(6), pbr(7), rar(8), saf(9), sdf(10), wiv(11), unknown(12)  

H3cDot11WIDSPermitVendorEntry  
SEQUENCE    
  h3cDot11VendorOUI OCTET STRING
  h3cDot11PermitVendorRowStatus RowStatus
  h3cDot11VendorName OCTET STRING

H3cDot11WIDSPermitSSIDEntry  
SEQUENCE    
  h3cDot11PermitSSID H3cDot11SSIDStringType
  h3cDot11PermitSSIDRowStatus RowStatus
  h3cDot11PermitSSIDDetected TruthValue

H3cDot11WIDSIgnoreListEntry  
SEQUENCE    
  h3cDot11IgnoreMAC MacAddress
  h3cDot11IgnoreListRowStatus RowStatus
  h3cDot11IgnoreMACDetected TruthValue
  h3cDot11IgnoreDevType H3cDot11WIDSDevType

H3cDot11WIDSAttackListEntry  
SEQUENCE    
  h3cDot11AttackDeviceMac MacAddress
  h3cDot11AttackListRowStatus RowStatus
  h3cDot11AttackDevDetected TruthValue
  h3cDot11AttackDevType H3cDot11WIDSDevType

H3cDot11StaticWhiteListEntry  
SEQUENCE    
  h3cDot11StaticWhiteListMAC MacAddress
  h3cDot11StaticWhiteListRowStatus RowStatus

H3cDot11StaticBlackListEntry  
SEQUENCE    
  h3cDot11StaticBlackListMAC MacAddress
  h3cDot11StaticBlackListRowStatus RowStatus

H3cDot11WIDSPermitBSSIDEntry  
SEQUENCE    
  h3cDot11PermitBSSID MacAddress
  h3cDot11PermitBSSIDDetected TruthValue
  h3cDot11PermitBSSIDRowStatus RowStatus

H3cDot11WIDSRogueAPEntry  
SEQUENCE    
  h3cDot11RogueAPBSSMAC MacAddress
  h3cDot11RogueAPVendorName OCTET STRING
  h3cDot11RogueAPMonitorNum Integer32
  h3cDot11RogueAPFirstDetectTm TimeTicks
  h3cDot11RogueAPLastDetectTm TimeTicks
  h3cDot11RogueAPSSID H3cDot11SSIDStringType
  h3cDot11RogueAPMaxSigStrength Integer32
  h3cDot11RogueAPChannel H3cDot11ChannelScopeType
  h3cDot11RogueAPBeaconInterval Integer32
  h3cDot11RogueAPAttackedStatus TruthValue
  h3cDot11RogueAPToIgnore TruthValue
  h3cDot11RogueAPEncryptStatus TruthValue
  h3cDot11RogueAPReset TruthValue
  h3cDot11RogueAPFirstDetectTmStr OCTET STRING
  h3cDot11RogueAPLastDetectTmStr OCTET STRING

H3cDot11WIDSRogueAPExtEntry  
SEQUENCE    
  h3cDot11WIDSAPID H3cDot11ObjectIDType
  h3cDot11DetectCurAPSigStrength Integer32
  h3cDot11DetectAPByChannel H3cDot11ChannelScopeType
  h3cDot11DetectAPByRadioID H3cDot11RadioScopeType
  h3cDot11AttackAPStatus TruthValue
  h3cDot11DetectAPFirstTm TimeTicks
  h3cDot11DetectAPLastTm TimeTicks

H3cDot11WIDSRogueStaEntry  
SEQUENCE    
  h3cDot11RogueStaMAC MacAddress
  h3cDot11RogueStaVendorName OCTET STRING
  h3cDot11RogueStaMonitorNum Integer32
  h3cDot11RogueStaFirstDetectTm TimeTicks
  h3cDot11RogueStaLastDetectTm TimeTicks
  h3cDot11RogueStaAccessBSSID MacAddress
  h3cDot11RogueStaMaxSigStrength Integer32
  h3cDot11RogueStaChannel H3cDot11ChannelScopeType
  h3cDot11RogueStaAttackedStatus TruthValue
  h3cDot11RogueStaToIgnore TruthValue
  h3cDot11RogueStaAdHocStatus TruthValue
  h3cDot11RogueStaReset TruthValue
  h3cDot11RogueStaFirstDetectTmStr OCTET STRING
  h3cDot11RogueStaLastDetectTmStr OCTET STRING

H3cDot11WIDSRogueStaExtEntry  
SEQUENCE    
  h3cDot11DetectCurStaSigStrength Integer32
  h3cDot11DetectStaByChannel H3cDot11ChannelScopeType
  h3cDot11DetectStaByRadioID H3cDot11RadioScopeType
  h3cDot11AttackStaStatus TruthValue
  h3cDot11DetectStaFirstTm TimeTicks
  h3cDot11DetectStaLastTm TimeTicks

H3cDot11WIDSDetectedDevEntry  
SEQUENCE    
  h3cDot11WIDSDevMAC MacAddress
  h3cDot11WIDSDevType H3cDot11WIDSDevType
  h3cDot11WIDSDevPermitType H3cDot11WIDSDevPermitType
  h3cDot11WIDSDevVendor OCTET STRING
  h3cDot11WIDSDevMonitorNum Integer32
  h3cDot11WIDSDevSSID OCTET STRING
  h3cDot11WIDSDevBSSID MacAddress
  h3cDot11WIDSDevChannel H3cDot11ChannelScopeType
  h3cDot11WIDSDevMaxRSSI Integer32
  h3cDot11WIDSDevBeaconIntvl Integer32
  h3cDot11WIDSDevFstDctTime DateAndTime
  h3cDot11WIDSDevLstDctTime DateAndTime
  h3cDot11WIDSDevReset TruthValue
  h3cDot11WIDSDevSnr Integer32

H3cDot11WIDSRptAPEntry  
SEQUENCE    
  h3cDot11WIDSRptAPMAC MacAddress
  h3cDot11WIDSRptAPName OCTET STRING
  h3cDot11WIDSRptAPRadioID H3cDot11RadioScopeType
  h3cDot11WIDSRptAPMaxRSSI Integer32
  h3cDot11WIDSRptAPFstDctTime DateAndTime
  h3cDot11WIDSRptAPLstDctTime DateAndTime

H3cDot11DynBlackListEntry  
SEQUENCE    
  h3cDot11DynBlackListMAC MacAddress
  h3cDot11DynBlackListTime Unsigned32
  h3cDot11DynBlackListReason OCTET STRING
  h3cDot11DynBlackListReset TruthValue
  h3cDot11DynBlackListTimeTicks TimeTicks

H3cDot11WIDSRogueHistoryEntry  
SEQUENCE    
  h3cDot11WIDSRogueHisIndex Integer32
  h3cDot11WIDSRogueHisMAC MacAddress
  h3cDot11WIDSRogueHisVendor OCTET STRING
  h3cDot11WIDSRogueHisType H3cDot11WIDSDevType
  h3cDot11WIDSRogueHisChl H3cDot11ChannelScopeType
  h3cDot11WIDSRogueHisSSID OCTET STRING
  h3cDot11WIDSRogueHisLastDctTime DateAndTime

H3cDot11WIDSAtkHistroyEntry  
SEQUENCE    
  h3cDot11WIDSAtkHisIndex Integer32
  h3cDot11WIDSAtkHisMAC MacAddress
  h3cDot11WIDSAtkHisType H3cDot11WIDSAtkType
  h3cDot11WIDSAtkHisChl H3cDot11ChannelScopeType
  h3cDot11WIDSAtkHisRSSI Integer32
  h3cDot11WIDSAtkHisDctTime DateAndTime
  h3cDot11WIDSAtkHisAPName OCTET STRING

H3cDot11WIDSAtkStasEntry  
SEQUENCE    
  h3cDot11WIDSAtkStasType H3cDot11WIDSAtkType
  h3cDot11WIDSAtkStasCurCnt Unsigned32
  h3cDot11WIDSAtkStasTotalCnt Unsigned32

H3cDot11BlackListEntry  
SEQUENCE    
  h3cDot11BlackListMAC MacAddress
  h3cDot11BlackListTime Unsigned32
  h3cDot11BlackListReason OCTET STRING
  h3cDot11BlackListRowStatus RowStatus
  h3cDot11BlackListTimeTicks TimeTicks

Defined Values

h3cDot11WIDS 1.3.6.1.4.1.2011.10.2.75.5
This MIB provides information about WIDS feature. GLOSSARY Wireless Intrusion Detection Sensor (WIDS) WIDS is designed to be employed in an area that is serviced by an existing wireless network. It aids in the early detection of malicious outsider attacks and intrusions via wireless networks. Rogue AP A rogue access point is any Wi-Fi access point connected to the network without authorization. As it is not authorized, if there is any weakness in the AP, the hacker will have chance to compromise the network. Rogue Station It is similiar to Rogue AP, while it is a station. Monitor AP An AP will scan or listen to the air, and try to detect wireless attack in the network. Some AP products will work only in monitor role, while some AP products could switch between normal AP role (only provide wireless access service)and monitor AP role. Ad Hoc Mode Station could work under Ad hoc mode, then they could directly do peer-to-peer communication without other device support.
MODULE-IDENTITY    

h3cDot11WIDSConfigGroup 1.3.6.1.4.1.2011.10.2.75.5.1
OBJECT IDENTIFIER    

h3cDot11WIDSGlobalConfigGroup 1.3.6.1.4.1.2011.10.2.75.5.1.1
OBJECT IDENTIFIER    

h3cDot11WIDSDetectGroup 1.3.6.1.4.1.2011.10.2.75.5.2
OBJECT IDENTIFIER    

h3cDot11WIDSNotifyGroup 1.3.6.1.4.1.2011.10.2.75.5.3
OBJECT IDENTIFIER    

h3cDot11WIDSScanMode 1.3.6.1.4.1.2011.10.2.75.5.1.1.1
Represents the scope of channels to be scanned. The following value are supported all(1) - Do scan on all the channels. auto(2) - Do scan for the channels that automatically selected by WIDS.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(1), auto(2)  

h3cDot11WIDSScanChannelList 1.3.6.1.4.1.2011.10.2.75.5.1.1.2
Represents the channel scope to be scanned when h3cDot11WIDSScanMode is configurated as channelSpec mode. Each channel value will be separated by comma character.
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

h3cDot11CntMsrMode 1.3.6.1.4.1.2011.10.2.75.5.1.1.3
Represents the countermeasures mode.
Status: current Access: read-write
OBJECT-TYPE    
  BITS rogue(0), adhoc(1), config(2)  

h3cDot11DevAgingTime 1.3.6.1.4.1.2011.10.2.75.5.1.1.4
Represents the age time for entries in the detected device table. If an entry is not detected within the interval, it is deleted from the detected device table. If the deleted entry is that of a rogue, it is added into the rogue history table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 300..1800  

h3cDot11DynBlkListEnable 1.3.6.1.4.1.2011.10.2.75.5.1.1.5
Represents whether the dynamic blacklist feature is enabled or not. 'true' : Enable the dynamic blacklist feature to filter out unwanted clients, which will not get associated. 'false' : Disable the dynamic blacklist feature.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11DynBlkListLifeTime 1.3.6.1.4.1.2011.10.2.75.5.1.1.6
Represents the lifetime for dynamic blacklist entries. If a dynamic blacklist entry is not detected within the lifetime, the entry will be removed from the dynamic blacklist. The lifetime becomes active only if dynamic blacklist feature is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 60..3600  

h3cDot11FloodAtkDctEnable 1.3.6.1.4.1.2011.10.2.75.5.1.1.7
Represents whether detection of flood attack is enabled or not. 'true' : Enable the detection of flood attack. 'false' : Disable the detection of flood attack.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11SpoofAtkDctEnable 1.3.6.1.4.1.2011.10.2.75.5.1.1.8
Represents whether detection of Spoof attack is enabled or not. 'true' : Enable the detection of Spoof attack. 'false' : Disable the detection of Spoof attack.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11WeakIVAtkDctEnable 1.3.6.1.4.1.2011.10.2.75.5.1.1.9
Represents whether detection of weak-iv attack is enabled or not. 'true' : Enable the detection of weak-iv attack. 'false' : Disable the detection of weak-iv attack.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11ResetWIDSRogueHistory 1.3.6.1.4.1.2011.10.2.75.5.1.1.10
This object is used to clear all entries from the rogue history table. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11ResetWIDSHistroy 1.3.6.1.4.1.2011.10.2.75.5.1.1.11
This object is used to clear the history information of attacks detected in the WLAN system. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11ResetWIDSStatistics 1.3.6.1.4.1.2011.10.2.75.5.1.1.12
This object is used to clear the statistics of attacks detected in the WLAN system. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11ResetAllDynBlkList 1.3.6.1.4.1.2011.10.2.75.5.1.1.13
This object is used to remove all entries from the dynamic blacklist. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11ResetAllStcBlkList 1.3.6.1.4.1.2011.10.2.75.5.1.1.14
This object is used to remove all entries from the static blacklist. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11ResetAllWhtBlkList 1.3.6.1.4.1.2011.10.2.75.5.1.1.15
This object is used to remove all entries from the static whitelist. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11ResetAllDctRogueAP 1.3.6.1.4.1.2011.10.2.75.5.1.1.16
This object is used to clear the information of all detected rogue APs. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11ResetAllDctRogueSta 1.3.6.1.4.1.2011.10.2.75.5.1.1.17
This object is used to clear the information of all detected rogue clients. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11ResetAllDctAdhoc 1.3.6.1.4.1.2011.10.2.75.5.1.1.18
This object is used to clear the information of all detected ad hoc devices. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11ResetAllDctDevice 1.3.6.1.4.1.2011.10.2.75.5.1.1.19
This object is used to clear the information of all detected devices. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11ResetAllDctSSID 1.3.6.1.4.1.2011.10.2.75.5.1.1.20
This object is used to clear the information of all detected SSIDs. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11WidsFloodInterval 1.3.6.1.4.1.2011.10.2.75.5.1.1.21
The interval of WIDS flood detection.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

h3cDot11WidsBlackListThreshold 1.3.6.1.4.1.2011.10.2.75.5.1.1.22
When flood attack exceeds the value of this node, the MAC address will be added into black list.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

h3cDot11SSIDFilterOnOff 1.3.6.1.4.1.2011.10.2.75.5.1.1.23
Represents whether the SSID permit feature is enabled or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

h3cDot11BSSIDFilterOnOff 1.3.6.1.4.1.2011.10.2.75.5.1.1.24
Represents whether the BSSID permit feature is enabled or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

h3cDot11WIDSPermitVendorTable 1.3.6.1.4.1.2011.10.2.75.5.1.2
The table provides the permitted vendor list, and each vendor will be identified by OUI. The legal device should be made by the permitted vendors.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11WIDSPermitVendorEntry

h3cDot11WIDSPermitVendorEntry 1.3.6.1.4.1.2011.10.2.75.5.1.2.1
Each entry provides the information of permitted vendor.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11WIDSPermitVendorEntry  

h3cDot11VendorOUI 1.3.6.1.4.1.2011.10.2.75.5.1.2.1.1
Represents the vendor OUI information of the wireless device.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(3)  

h3cDot11PermitVendorRowStatus 1.3.6.1.4.1.2011.10.2.75.5.1.2.1.2
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cDot11VendorName 1.3.6.1.4.1.2011.10.2.75.5.1.2.1.3
Represents the vendor name of the wireless device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

h3cDot11WIDSPermitSSIDTable 1.3.6.1.4.1.2011.10.2.75.5.1.3
The table represents the list of SSID could be permitted in the wireless network.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11WIDSPermitSSIDEntry

h3cDot11WIDSPermitSSIDEntry 1.3.6.1.4.1.2011.10.2.75.5.1.3.1
Each entry provides the information of permitted SSID.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11WIDSPermitSSIDEntry  

h3cDot11PermitSSID 1.3.6.1.4.1.2011.10.2.75.5.1.3.1.1
Represents the permitted SSID in the wireless network.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11SSIDStringType Size(0..127)  

h3cDot11PermitSSIDRowStatus 1.3.6.1.4.1.2011.10.2.75.5.1.3.1.2
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cDot11PermitSSIDDetected 1.3.6.1.4.1.2011.10.2.75.5.1.3.1.3
Represents whether the permitted SSID is detected or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

h3cDot11WIDSIgnoreListTable 1.3.6.1.4.1.2011.10.2.75.5.1.4
The table provides the MAC address list of stations or APs, and WIDS always take them as legal stations or APs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11WIDSIgnoreListEntry

h3cDot11WIDSIgnoreListEntry 1.3.6.1.4.1.2011.10.2.75.5.1.4.1
Each entry contains the MAC address of station or AP, and WIDS always take it as legal station or AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11WIDSIgnoreListEntry  

h3cDot11IgnoreMAC 1.3.6.1.4.1.2011.10.2.75.5.1.4.1.1
Represents the MAC address of station or AP, and WIDS always take it as legal station or AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

h3cDot11IgnoreListRowStatus 1.3.6.1.4.1.2011.10.2.75.5.1.4.1.2
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cDot11IgnoreMACDetected 1.3.6.1.4.1.2011.10.2.75.5.1.4.1.3
Represents whether the MAC address detected or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

h3cDot11IgnoreDevType 1.3.6.1.4.1.2011.10.2.75.5.1.4.1.4
Represents the type of the MAC address detected. The value of this object always is unknown if the MAC address is not detected.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11WIDSDevType  

h3cDot11WIDSAttackListTable 1.3.6.1.4.1.2011.10.2.75.5.1.5
The table provides the MAC address list of rogue APs or rogue stations, the WIDS will take countermeasure as per the MAC address list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11WIDSAttackListEntry

h3cDot11WIDSAttackListEntry 1.3.6.1.4.1.2011.10.2.75.5.1.5.1
Each entry contains the MAC address of rogue AP or rogue station, and the countermeasure will be taken for it.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11WIDSAttackListEntry  

h3cDot11AttackDeviceMac 1.3.6.1.4.1.2011.10.2.75.5.1.5.1.1
Represents the MAC address of rogue AP or rogue station, and the countermeasure will be taken for it.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

h3cDot11AttackListRowStatus 1.3.6.1.4.1.2011.10.2.75.5.1.5.1.2
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cDot11AttackDevDetected 1.3.6.1.4.1.2011.10.2.75.5.1.5.1.3
Represents whether the assigned MAC address in attack list is detected or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

h3cDot11AttackDevType 1.3.6.1.4.1.2011.10.2.75.5.1.5.1.4
Represents the type of detected MAC address in attack list. If the MAC address is not detected, it will return unknown(5) for get operation.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11WIDSDevType  

h3cDot11StaticWhiteListTable 1.3.6.1.4.1.2011.10.2.75.5.1.6
The table provides the information of whitelist.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11StaticWhiteListEntry

h3cDot11StaticWhiteListEntry 1.3.6.1.4.1.2011.10.2.75.5.1.6.1
Each entry contains the information of whitelist.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11StaticWhiteListEntry  

h3cDot11StaticWhiteListMAC 1.3.6.1.4.1.2011.10.2.75.5.1.6.1.1
Represents the MAC addresses in whitelist.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

h3cDot11StaticWhiteListRowStatus 1.3.6.1.4.1.2011.10.2.75.5.1.6.1.2
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cDot11StaticBlackListTable 1.3.6.1.4.1.2011.10.2.75.5.1.7
The table provides the information of static blacklist.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11StaticBlackListEntry

h3cDot11StaticBlackListEntry 1.3.6.1.4.1.2011.10.2.75.5.1.7.1
Each entry contains the information of static blacklist.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11StaticBlackListEntry  

h3cDot11StaticBlackListMAC 1.3.6.1.4.1.2011.10.2.75.5.1.7.1.1
Represents the MAC addresses in static blacklist.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

h3cDot11StaticBlackListRowStatus 1.3.6.1.4.1.2011.10.2.75.5.1.7.1.2
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cDot11WIDSPermitBSSIDTable 1.3.6.1.4.1.2011.10.2.75.5.1.8
The table represents the list of BSSID could be permitted in the wireless network.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11WIDSPermitBSSIDEntry

h3cDot11WIDSPermitBSSIDEntry 1.3.6.1.4.1.2011.10.2.75.5.1.8.1
Each entry provides the information of permitted BSSID.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11WIDSPermitBSSIDEntry  

h3cDot11PermitBSSID 1.3.6.1.4.1.2011.10.2.75.5.1.8.1.1
Represents the permitted BSSID in the wireless network.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

h3cDot11PermitBSSIDDetected 1.3.6.1.4.1.2011.10.2.75.5.1.8.1.2
Represents whether the permitted BSSID is detected or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

h3cDot11PermitBSSIDRowStatus 1.3.6.1.4.1.2011.10.2.75.5.1.8.1.3
Represents the row status of permit BSSID table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cDot11WIDSRogueAPTable 1.3.6.1.4.1.2011.10.2.75.5.2.1
The table represents the list of possible BSS information for rogue APs detected by the WIDS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11WIDSRogueAPEntry

h3cDot11WIDSRogueAPEntry 1.3.6.1.4.1.2011.10.2.75.5.2.1.1
Each entry contains possible BSS information of each rogue AP detected by WIDS.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11WIDSRogueAPEntry  

h3cDot11RogueAPBSSMAC 1.3.6.1.4.1.2011.10.2.75.5.2.1.1.1
Represents the BSS MAC address of rogue AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

h3cDot11RogueAPVendorName 1.3.6.1.4.1.2011.10.2.75.5.2.1.1.2
Represents the vendor name of rogue AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

h3cDot11RogueAPMonitorNum 1.3.6.1.4.1.2011.10.2.75.5.2.1.1.3
Represents the number of monitor APs which detected the rogue AP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11RogueAPFirstDetectTm 1.3.6.1.4.1.2011.10.2.75.5.2.1.1.4
Represents the time that AP was detected as a rogue AP for the first time.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

h3cDot11RogueAPLastDetectTm 1.3.6.1.4.1.2011.10.2.75.5.2.1.1.5
Represents the time that AP was detected as a rogue AP for the last time.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

h3cDot11RogueAPSSID 1.3.6.1.4.1.2011.10.2.75.5.2.1.1.6
Represents the SSID broadcasted by rogue AP.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11SSIDStringType  

h3cDot11RogueAPMaxSigStrength 1.3.6.1.4.1.2011.10.2.75.5.2.1.1.7
Represents the maximal value of signal strength that WIDS received from the rogue AP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11RogueAPChannel 1.3.6.1.4.1.2011.10.2.75.5.2.1.1.8
Represents on which radio channel of the rogue AP the maximal signal strength was received.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11ChannelScopeType  

h3cDot11RogueAPBeaconInterval 1.3.6.1.4.1.2011.10.2.75.5.2.1.1.9
Represents the interval for Beacon management frame of rogue AP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11RogueAPAttackedStatus 1.3.6.1.4.1.2011.10.2.75.5.2.1.1.10
Represents whether the countermeasure have taken for the rogue AP.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

h3cDot11RogueAPToIgnore 1.3.6.1.4.1.2011.10.2.75.5.2.1.1.11
Represents whether the rogue AP will be taken as a rogue AP. If the value is true, NMS should not display the rogue AP as NMS display rogue AP list, and the MAC address will be automatically added into h3cDot11WIDSIgnoreListTable. If the value is false, NMS will take it as a rogue AP.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11RogueAPEncryptStatus 1.3.6.1.4.1.2011.10.2.75.5.2.1.1.12
Represents whether the rogue AP encrypt the frame or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

h3cDot11RogueAPReset 1.3.6.1.4.1.2011.10.2.75.5.2.1.1.13
This object is used to clear information of assigned AP. The information of AP which detect assigned rogue AP will be cleared together. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11RogueAPFirstDetectTmStr 1.3.6.1.4.1.2011.10.2.75.5.2.1.1.14
Represents the time that AP was detected as a rogue AP for the first time.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

h3cDot11RogueAPLastDetectTmStr 1.3.6.1.4.1.2011.10.2.75.5.2.1.1.15
Represents the time that AP was detected as a rogue AP for the last time.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

h3cDot11WIDSRogueAPExtTable 1.3.6.1.4.1.2011.10.2.75.5.2.2
As each rogue AP could be detected by multiple monitor APs, each monitor AP could have some kind of detailed information about a specific rogue AP. In the h3cDot11WIDSRogueAPTable table, the detailed information for a specific rogue AP will be summarized from information in the h3cDot11WIDSRogueAPExtTable table. For example, multiple monitor APs could receive RF signal of one rogue AP, and each monitor AP has its maximum signal strength by itself. The information will be kept as h3cDot11DetectMaxAPSigStrength in the h3cDot11WIDSRogueAPExtTable table. While only the maximum value among all the h3cDot11DetectMaxAPSigStrength for each monitor AP will be kept in the h3cDot11WIDSRogueAPTable as h3cDot11RogueAPMaxSigStrength.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11WIDSRogueAPExtEntry

h3cDot11WIDSRogueAPExtEntry 1.3.6.1.4.1.2011.10.2.75.5.2.2.1
Each entry contains information of the rogue AP detected by each monitor AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11WIDSRogueAPExtEntry  

h3cDot11WIDSAPID 1.3.6.1.4.1.2011.10.2.75.5.2.2.1.1
To uniquely identify each AP, and relation-ship between h3cDot11WIDSAPID and AP device will be static.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11ObjectIDType  

h3cDot11DetectCurAPSigStrength 1.3.6.1.4.1.2011.10.2.75.5.2.2.1.2
Represents the current value of signal strength that WIDS monitor AP received from the rogue AP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11DetectAPByChannel 1.3.6.1.4.1.2011.10.2.75.5.2.2.1.3
Represents on which radio channel that WIDS monitor AP detected the rogue AP.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11ChannelScopeType  

h3cDot11DetectAPByRadioID 1.3.6.1.4.1.2011.10.2.75.5.2.2.1.4
Represents on which radio the monitor AP has detected the rogue AP.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11RadioScopeType  

h3cDot11AttackAPStatus 1.3.6.1.4.1.2011.10.2.75.5.2.2.1.5
Represents whether monitor AP have taken countermeasure on the rogue AP.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

h3cDot11DetectAPFirstTm 1.3.6.1.4.1.2011.10.2.75.5.2.2.1.6
Represents the time that monitor AP detected the rogue AP for the first time.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

h3cDot11DetectAPLastTm 1.3.6.1.4.1.2011.10.2.75.5.2.2.1.7
Represents the time that monitor AP detected the rogue AP for the last time.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

h3cDot11WIDSRogueStaTable 1.3.6.1.4.1.2011.10.2.75.5.2.3
The table represents the list of rogue stations detected by the WIDS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11WIDSRogueStaEntry

h3cDot11WIDSRogueStaEntry 1.3.6.1.4.1.2011.10.2.75.5.2.3.1
Each entry contains information of each rogue station.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11WIDSRogueStaEntry  

h3cDot11RogueStaMAC 1.3.6.1.4.1.2011.10.2.75.5.2.3.1.1
Represents the MAC address of rogue station.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

h3cDot11RogueStaVendorName 1.3.6.1.4.1.2011.10.2.75.5.2.3.1.2
Represents the vendor name of rogue station.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

h3cDot11RogueStaMonitorNum 1.3.6.1.4.1.2011.10.2.75.5.2.3.1.3
Represents the number of monitor APs which detected the rogue station.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11RogueStaFirstDetectTm 1.3.6.1.4.1.2011.10.2.75.5.2.3.1.4
Represents the time that station was detected as a rogue station for the first time.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

h3cDot11RogueStaLastDetectTm 1.3.6.1.4.1.2011.10.2.75.5.2.3.1.5
Represents the time that station was detected as a rogue station for the last time.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

h3cDot11RogueStaAccessBSSID 1.3.6.1.4.1.2011.10.2.75.5.2.3.1.6
Represents BSS MAC address that rogue station try to access.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

h3cDot11RogueStaMaxSigStrength 1.3.6.1.4.1.2011.10.2.75.5.2.3.1.7
Represents the maximal value of signal strength that WIDS received from the rogue station.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11RogueStaChannel 1.3.6.1.4.1.2011.10.2.75.5.2.3.1.8
Represents on which radio channel the maximal signal strength was received.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11ChannelScopeType  

h3cDot11RogueStaAttackedStatus 1.3.6.1.4.1.2011.10.2.75.5.2.3.1.9
Represents whether the countermeasure have taken for the rogue station.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

h3cDot11RogueStaToIgnore 1.3.6.1.4.1.2011.10.2.75.5.2.3.1.10
Represents whether the rogue AP will be taken as a rogue station. If the value is true, NMS should not display the rogue station as NMS display rogue station list, and the MAC address will be automatically added into h3cDot11WIDSIgnoreListTable. If the value is false, NMS will take it as a rogue station.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11RogueStaAdHocStatus 1.3.6.1.4.1.2011.10.2.75.5.2.3.1.11
Represents whether the rogue station work on the Ad Hoc mode or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

h3cDot11RogueStaReset 1.3.6.1.4.1.2011.10.2.75.5.2.3.1.12
This object is used to clear information of assigned station. The information of AP which detects assigned rogue station will be cleared together. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11RogueStaFirstDetectTmStr 1.3.6.1.4.1.2011.10.2.75.5.2.3.1.13
Represents the time that station was detected as a rogue station for the first time.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

h3cDot11RogueStaLastDetectTmStr 1.3.6.1.4.1.2011.10.2.75.5.2.3.1.14
Represents the time that station was detected as a rogue station for the last time.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

h3cDot11WIDSRogueStaExtTable 1.3.6.1.4.1.2011.10.2.75.5.2.4
As each rogue station could be detected by multiple monitor APs, each monitor AP could have some kind of detailed information about a specific rogue station. In the h3cDot11WIDSRogueStaTable table, the detailed information for a specific rogue station will be summarized from information in the h3cDot11WIDSRogueStaExtTable table. For example, multiple monitor APs could receive RF signal of one rogue station, and each monitor AP has its maximum signal strength by itself. The information will be kept as h3cDot11DetectMaxStaSigStrength in the h3cDot11WIDSRogueStaExtTable table. While only the maximum value among all the h3cDot11DetectMaxStaSigStrength for each monitor AP will be kept in the h3cDot11WIDSRogueStaTable as h3cDot11RogueStaMaxSigStrength.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11WIDSRogueStaExtEntry

h3cDot11WIDSRogueStaExtEntry 1.3.6.1.4.1.2011.10.2.75.5.2.4.1
Each entry contains information of rogue station detected by each monitor AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11WIDSRogueStaExtEntry  

h3cDot11DetectCurStaSigStrength 1.3.6.1.4.1.2011.10.2.75.5.2.4.1.1
Represents the current value of signal strength that WIDS monitor AP received from the rogue station.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11DetectStaByChannel 1.3.6.1.4.1.2011.10.2.75.5.2.4.1.2
Represents on which radio channel the maximal signal strength was received.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11ChannelScopeType  

h3cDot11DetectStaByRadioID 1.3.6.1.4.1.2011.10.2.75.5.2.4.1.3
Represents which radio on the monitor AP has detected the rogue station.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11RadioScopeType  

h3cDot11AttackStaStatus 1.3.6.1.4.1.2011.10.2.75.5.2.4.1.4
Represents whether monitor AP have taken countermeasure for the rogue station.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

h3cDot11DetectStaFirstTm 1.3.6.1.4.1.2011.10.2.75.5.2.4.1.5
Represents the time that monitor AP detected the rogue station for the first time.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

h3cDot11DetectStaLastTm 1.3.6.1.4.1.2011.10.2.75.5.2.4.1.6
Represents the time that monitor AP detected the rogue station for the last time.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

h3cDot11WIDSDetectedDevTable 1.3.6.1.4.1.2011.10.2.75.5.2.5
This Table contains information of detected devices.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11WIDSDetectedDevEntry

h3cDot11WIDSDetectedDevEntry 1.3.6.1.4.1.2011.10.2.75.5.2.5.1
Each entry contains information of detected devices.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11WIDSDetectedDevEntry  

h3cDot11WIDSDevMAC 1.3.6.1.4.1.2011.10.2.75.5.2.5.1.1
Represents MAC address of the device detected.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

h3cDot11WIDSDevType 1.3.6.1.4.1.2011.10.2.75.5.2.5.1.2
Represents type of the device detected.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11WIDSDevType  

h3cDot11WIDSDevPermitType 1.3.6.1.4.1.2011.10.2.75.5.2.5.1.3
Represents whether the device detected is a rogue device or not.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11WIDSDevPermitType  

h3cDot11WIDSDevVendor 1.3.6.1.4.1.2011.10.2.75.5.2.5.1.4
Represents Vendor of the detected device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

h3cDot11WIDSDevMonitorNum 1.3.6.1.4.1.2011.10.2.75.5.2.5.1.5
Represents the number of active APs that detect the device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11WIDSDevSSID 1.3.6.1.4.1.2011.10.2.75.5.2.5.1.6
Represents the service set identifier for the ESS of the device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

h3cDot11WIDSDevBSSID 1.3.6.1.4.1.2011.10.2.75.5.2.5.1.7
Represents the basic service set identifier of the detected device.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

h3cDot11WIDSDevChannel 1.3.6.1.4.1.2011.10.2.75.5.2.5.1.8
Represents the channel in which the device was last detected.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11ChannelScopeType  

h3cDot11WIDSDevMaxRSSI 1.3.6.1.4.1.2011.10.2.75.5.2.5.1.9
Represents the maximum detected RSSI of the device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11WIDSDevBeaconIntvl 1.3.6.1.4.1.2011.10.2.75.5.2.5.1.10
Represents the beacon interval for the detected AP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11WIDSDevFstDctTime 1.3.6.1.4.1.2011.10.2.75.5.2.5.1.11
Represents the time at which the device was first detected.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

h3cDot11WIDSDevLstDctTime 1.3.6.1.4.1.2011.10.2.75.5.2.5.1.12
Represents the time at which the rogue AP was detected last time.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

h3cDot11WIDSDevReset 1.3.6.1.4.1.2011.10.2.75.5.2.5.1.13
This object is used to clears the information of the device detected in the WLAN. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11WIDSDevSnr 1.3.6.1.4.1.2011.10.2.75.5.2.5.1.14
Represents SNR of the device detected.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11WIDSRptAPTable 1.3.6.1.4.1.2011.10.2.75.5.2.6
This Table contains information of the AP which detected device in the WLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11WIDSRptAPEntry

h3cDot11WIDSRptAPEntry 1.3.6.1.4.1.2011.10.2.75.5.2.6.1
Each entry contains information of the AP which detected device in the WLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11WIDSRptAPEntry  

h3cDot11WIDSRptAPMAC 1.3.6.1.4.1.2011.10.2.75.5.2.6.1.1
Represents the MAC address of the AP that detected the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

h3cDot11WIDSRptAPName 1.3.6.1.4.1.2011.10.2.75.5.2.6.1.2
Represents the name of the AP that detected the device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

h3cDot11WIDSRptAPRadioID 1.3.6.1.4.1.2011.10.2.75.5.2.6.1.3
Represents the radio index of the AP that detected the device.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11RadioScopeType  

h3cDot11WIDSRptAPMaxRSSI 1.3.6.1.4.1.2011.10.2.75.5.2.6.1.4
Represents the maximum detected RSSI of the device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11WIDSRptAPFstDctTime 1.3.6.1.4.1.2011.10.2.75.5.2.6.1.5
Represents the time at which the rogue AP was detected first time.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

h3cDot11WIDSRptAPLstDctTime 1.3.6.1.4.1.2011.10.2.75.5.2.6.1.6
Represents the time at which the rogue AP was detected last time.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

h3cDot11DynBlackListTable 1.3.6.1.4.1.2011.10.2.75.5.2.7
This table contains information of dynamic blacklist entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11DynBlackListEntry

h3cDot11DynBlackListEntry 1.3.6.1.4.1.2011.10.2.75.5.2.7.1
Each entry contains information of dynamic blacklist.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11DynBlackListEntry  

h3cDot11DynBlackListMAC 1.3.6.1.4.1.2011.10.2.75.5.2.7.1.1
Represents the MAC address of the device inserted into the dynamic blacklist.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

h3cDot11DynBlackListTime 1.3.6.1.4.1.2011.10.2.75.5.2.7.1.2
Represents the time elapsed since the entry was last updated.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cDot11DynBlackListReason 1.3.6.1.4.1.2011.10.2.75.5.2.7.1.3
Represents the reason why the entry was added into the dynamic blacklist.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

h3cDot11DynBlackListReset 1.3.6.1.4.1.2011.10.2.75.5.2.7.1.4
This object is used to remove designated entry from the dynamic blacklist. The value which read from this object always is false.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11DynBlackListTimeTicks 1.3.6.1.4.1.2011.10.2.75.5.2.7.1.5
Represents the time elapsed since the entry was last updated in units TimeTicks.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

h3cDot11WIDSRogueHistoryTable 1.3.6.1.4.1.2011.10.2.75.5.2.8
This table contains information of all expired rogue devices which have been deleted from the list of detected rogue devices because they could not be detected within the device aging duration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11WIDSRogueHistoryEntry

h3cDot11WIDSRogueHistoryEntry 1.3.6.1.4.1.2011.10.2.75.5.2.8.1
Each entry contains information of an expired rogue device which has been deleted from the list of detected rogue devices because they could not be detected within the device aging duration.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11WIDSRogueHistoryEntry  

h3cDot11WIDSRogueHisIndex 1.3.6.1.4.1.2011.10.2.75.5.2.8.1.1
Represents index of this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

h3cDot11WIDSRogueHisMAC 1.3.6.1.4.1.2011.10.2.75.5.2.8.1.2
Represents the MAC address of the device.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

h3cDot11WIDSRogueHisVendor 1.3.6.1.4.1.2011.10.2.75.5.2.8.1.3
Represents the vendor for the device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

h3cDot11WIDSRogueHisType 1.3.6.1.4.1.2011.10.2.75.5.2.8.1.4
Represents the type of the device.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11WIDSDevType  

h3cDot11WIDSRogueHisChl 1.3.6.1.4.1.2011.10.2.75.5.2.8.1.5
Represents the channel in which the device was last detected.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11ChannelScopeType  

h3cDot11WIDSRogueHisSSID 1.3.6.1.4.1.2011.10.2.75.5.2.8.1.6
Represents the service set identifier for the ESS of the device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

h3cDot11WIDSRogueHisLastDctTime 1.3.6.1.4.1.2011.10.2.75.5.2.8.1.7
Represents the time at which the device was last detected.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

h3cDot11WIDSAtkHistroyTable 1.3.6.1.4.1.2011.10.2.75.5.2.9
This table contains information of the history of attacks detected in the WLAN system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11WIDSAtkHistroyEntry

h3cDot11WIDSAtkHistroyEntry 1.3.6.1.4.1.2011.10.2.75.5.2.9.1
Each entry contains information of the history of attacks detected in the WLAN system.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11WIDSAtkHistroyEntry  

h3cDot11WIDSAtkHisIndex 1.3.6.1.4.1.2011.10.2.75.5.2.9.1.1
Represents index of this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

h3cDot11WIDSAtkHisMAC 1.3.6.1.4.1.2011.10.2.75.5.2.9.1.2
Represents the Mac address. In case of spoof attacks, this field provides the BSSID which was spoofed. In case of other attacks, this field provides the MAC address of the device which initiated the attack.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

h3cDot11WIDSAtkHisType 1.3.6.1.4.1.2011.10.2.75.5.2.9.1.3
Represents the type of attack.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11WIDSAtkType  

h3cDot11WIDSAtkHisChl 1.3.6.1.4.1.2011.10.2.75.5.2.9.1.4
Represents the channel in which the attack was detected.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11ChannelScopeType  

h3cDot11WIDSAtkHisRSSI 1.3.6.1.4.1.2011.10.2.75.5.2.9.1.5
Represents the average RSSI of the designated attack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11WIDSAtkHisDctTime 1.3.6.1.4.1.2011.10.2.75.5.2.9.1.6
Represents the time at which this attack was detected.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

h3cDot11WIDSAtkHisAPName 1.3.6.1.4.1.2011.10.2.75.5.2.9.1.7
Represents the name of the AP which detected this attack.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

h3cDot11WIDSAtkStatis 1.3.6.1.4.1.2011.10.2.75.5.2.10
OBJECT IDENTIFIER    

h3cDot11WIDSAtkStasStartTime 1.3.6.1.4.1.2011.10.2.75.5.2.10.1
Represents current attack tracking time. It is started at the system startup and is refreshed each hour subsequently.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

h3cDot11WIDSAtkStasTable 1.3.6.1.4.1.2011.10.2.75.5.2.10.2
This table contains information of the counts of attacks detected.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11WIDSAtkStasEntry

h3cDot11WIDSAtkStasEntry 1.3.6.1.4.1.2011.10.2.75.5.2.10.2.1
Each entry contains information of the counts of attacks detected.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11WIDSAtkStasEntry  

h3cDot11WIDSAtkStasType 1.3.6.1.4.1.2011.10.2.75.5.2.10.2.1.1
Represents the type of attack.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11WIDSAtkType  

h3cDot11WIDSAtkStasCurCnt 1.3.6.1.4.1.2011.10.2.75.5.2.10.2.1.2
Represents the count of attacks detected since the time specified by the current attack tracking time. The current attack tracking time is started at the system startup and is refreshed each hour subsequently.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cDot11WIDSAtkStasTotalCnt 1.3.6.1.4.1.2011.10.2.75.5.2.10.2.1.3
Represents the total count of the attacks detected since the system startup.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cDot11BlackListTable 1.3.6.1.4.1.2011.10.2.75.5.2.11
This table contains information of blacklist entries, including dynamic and static.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11BlackListEntry

h3cDot11BlackListEntry 1.3.6.1.4.1.2011.10.2.75.5.2.11.1
Each entry contains information of blacklist.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11BlackListEntry  

h3cDot11BlackListMAC 1.3.6.1.4.1.2011.10.2.75.5.2.11.1.1
This object represents the MAC address of the device inserted into the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

h3cDot11BlackListTime 1.3.6.1.4.1.2011.10.2.75.5.2.11.1.2
Represents the time elapsed since the entry was last updated. If it is static blacklist, the value is always 0.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cDot11BlackListReason 1.3.6.1.4.1.2011.10.2.75.5.2.11.1.3
Represents the reason why the entry was added into the blacklist.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

h3cDot11BlackListRowStatus 1.3.6.1.4.1.2011.10.2.75.5.2.11.1.4
This object represents the status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cDot11BlackListTimeTicks 1.3.6.1.4.1.2011.10.2.75.5.2.11.1.5
Represents the time elapsed since the entry was last updated in timetick. If it is static blacklist, the value is always 0.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

h3cDot11WIDSTraps 1.3.6.1.4.1.2011.10.2.75.5.3.1
OBJECT IDENTIFIER    

h3cDot11WIDSDetectRogueTrap 1.3.6.1.4.1.2011.10.2.75.5.3.1.1
The notification represents that a rogue AP or a station was detected by WIDS. The NMS would refer to MIB table under h3cDot11WIDSDetectGroup group to get more detailed information.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cDot11WIDSAdHocTrap 1.3.6.1.4.1.2011.10.2.75.5.3.1.2
The notification represents a rogue Ad hoc station was detected.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cDot11WIDSUnauthorSSIDTrap 1.3.6.1.4.1.2011.10.2.75.5.3.1.3
The notification represents which unauthorized SSID are accessed in the network. The notification will be sent to NMS when an unauthorized SSID is detected on the network for the first time.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cDot11WIDSDisappearRogueTrap 1.3.6.1.4.1.2011.10.2.75.5.3.1.4
The notification represents that a rogue device has aged out and moved to history table or the device type has been changed to friendly. The notification will be sent to NMS whenever a rogue disappears.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cDot11WIDSDetectAttack 1.3.6.1.4.1.2011.10.2.75.5.3.1.5
This notification occurs when some type of attack is detected.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cDot11WIDSDetectWBridge 1.3.6.1.4.1.2011.10.2.75.5.3.1.6
This notification occurs whenever a detected device is classified as rogue wireless-bridge.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cDot11WIDSFloodTrap 1.3.6.1.4.1.2011.10.2.75.5.3.1.7
This notification occurs when flood attack is detected.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cDot11WIDSSpoofTrap 1.3.6.1.4.1.2011.10.2.75.5.3.1.8
This notification occurs when spoof attack is detected.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cDot11WIDSWeakIVTrap 1.3.6.1.4.1.2011.10.2.75.5.3.1.9
This notification occurs when weak IV attack is detected.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cDot11WIDSTrapVarObjects 1.3.6.1.4.1.2011.10.2.75.5.3.2
OBJECT IDENTIFIER    

h3cDot11WIDSRogueMAC 1.3.6.1.4.1.2011.10.2.75.5.3.2.1
Represents which rogue AP or station.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

h3cDot11WIDSRogueType 1.3.6.1.4.1.2011.10.2.75.5.3.2.2
Represents the rogue type. The following value are supported rogueAp(1) - A rogue AP rogueStation(2) - A rogue Station
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER rogueAp(1), rogueStation(2)  

h3cDot11WIDSMonitorMAC 1.3.6.1.4.1.2011.10.2.75.5.3.2.3
Represents which monitor detected the rogue AP or station.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

h3cDot11WIDSAdHocMAC 1.3.6.1.4.1.2011.10.2.75.5.3.2.4
Represents the MAC address of Ad hoc station.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

h3cDot11UnauthorSSIDName 1.3.6.1.4.1.2011.10.2.75.5.3.2.5
Represents an unauthorized SSID.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  H3cDot11SSIDStringType  

h3cDot11MonitorAPID 1.3.6.1.4.1.2011.10.2.75.5.3.2.6
Represents monitor AP's APID.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  H3cDot11ObjectIDType  

h3cDot11MonitorApRadioID 1.3.6.1.4.1.2011.10.2.75.5.3.2.7
Represents monitor AP's radio ID
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  H3cDot11RadioScopeType  

h3cDot11WIDSAtkMac 1.3.6.1.4.1.2011.10.2.75.5.3.2.8
Represents mac address of attack source.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

h3cDot11WIDSAtkFrameType 1.3.6.1.4.1.2011.10.2.75.5.3.2.9
Represents attack frame type.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

h3cDot11WIDSAtkChannel 1.3.6.1.4.1.2011.10.2.75.5.3.2.10
Represents attack channel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  H3cDot11ChannelScopeType  

h3cDot11WIDSAtkTime 1.3.6.1.4.1.2011.10.2.75.5.3.2.11
Represents when attacking happened.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

h3cDot11WIDSAtkDestMac 1.3.6.1.4.1.2011.10.2.75.5.3.2.12
Represents mac address of attack destination.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

h3cDot11WIDSFirstTrapTime 1.3.6.1.4.1.2011.10.2.75.5.3.2.13
Represents the first trap time.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TimeTicks