HH3C-LswVLAN-MIB

File: HH3C-LswVLAN-MIB.mib (34602 bytes)

Imported modules

SNMPv2-TC	SNMPv2-SMI	SNMP-FRAMEWORK-MIB
HH3C-OID-MIB	RFC1213-MIB	HH3C-LswINF-MIB

Imported symbols

TimeInterval	TEXTUAL-CONVENTION	TruthValue
RowStatus	MODULE-IDENTITY	OBJECT-TYPE
Counter32	Integer32	OBJECT-IDENTITY
TimeTicks	IpAddress	SnmpAdminString
hh3clswCommon	ifEntry	hh3cifVLANTrunkStatusEntry
PortList

Defined Types

Hh3cVlanIndex
A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB.
TEXTUAL-CONVENTION
	Integer32	0..2147483647

Hh3cDot1qVlanMIBEntry
SEQUENCE
	hh3cdot1qVlanIndex	Hh3cVlanIndex
	hh3cdot1qVlanName	SnmpAdminString
	hh3cdot1qVlanPorts	PortList
	hh3cdot1qVlanType	INTEGER
	hh3cdot1qVlanMacFilter	TruthValue
	hh3cdot1qVlanMcastUnknownProtos	TruthValue
	hh3cExistInterface	TruthValue
	hh3cVlanInterfaceIndex	INTEGER
	hh3cdot1qVlanMacLearn	TruthValue
	hh3cdot1qVlanStatus	INTEGER
	hh3cdot1qVlanCreationTime	TimeTicks
	hh3cdot1qVlanPriority	INTEGER
	hh3cdot1qVlanRowStatus	RowStatus
	hh3cdot1qVlanBroadcastSuppression	INTEGER
	hh3cdot1qVlanBcastSuppressionPPS	INTEGER
	hh3cdot1qVlanMulticast	INTEGER
	hh3cdot1qVlanTaggedPorts	PortList
	hh3cdot1qVlanUntaggedPorts	PortList
	hh3cdot1qVlanPortIndexs	OCTET STRING

Hh3cVlanInterfaceEntry
SEQUENCE
	hh3cVlanInterfaceID	INTEGER
	hh3cdot1qVlanID	Hh3cVlanIndex
	hh3cdot1qVlanIpAddress	IpAddress
	hh3cdot1qVlanIpAddressMask	IpAddress
	hh3cVlanInterfaceAdminStatus	INTEGER
	hh3cVlanInterfaceFrameType	INTEGER
	hh3cInterfaceRowStatus	RowStatus
	hh3cVlanInterfaceIpMethod	INTEGER
	hh3cVlanInterfaceIfIndex	INTEGER

Hh3cifIsolateMappingEntry
SEQUENCE
	hh3cifIsolatePrimaryVlanID	Hh3cVlanIndex
	hh3cifIsolateSecondaryVlanlistLow	OCTET STRING
	hh3cifIsolateSecondaryVlanlistHigh	OCTET STRING

Hh3cVlanInterfaceAddrEntry
SEQUENCE
	hh3cVlanInterfaceIpIfIndex	INTEGER
	hh3cVlanInterfaceIpAddr	IpAddress
	hh3cVlanInterfaceIpMask	IpAddress
	hh3cVlanInterfaceIpType	INTEGER
	hh3cVlanInterfaceIpRowStatus	RowStatus

Hh3cDot1qVlanBatchMIBEntry
SEQUENCE
	hh3cdot1qVlanBatchOperIndex	Integer32
	hh3cdot1qVlanBatchStartIndex	Hh3cVlanIndex
	hh3cdot1qVlanBatchEndIndex	Hh3cVlanIndex
	hh3cdot1qVlanBatchOperStatus	INTEGER
	hh3cdot1qVlanBatchRowStatus	RowStatus
	hh3cdot1qVlanBatchSetOperate	INTEGER

Hh3cifSuperVlanMappingEntry
SEQUENCE
	hh3cifSuperVlanID	Hh3cVlanIndex
	hh3cifSubVlanlistLow	OCTET STRING
	hh3cifSubVlanlistHigh	OCTET STRING

Hh3cPrivateVlanMappingEntry
SEQUENCE
	hh3cPrimaryVlanID	Hh3cVlanIndex
	hh3cSecondaryVlanlistLow	OCTET STRING
	hh3cSecondaryVlanlistHigh	OCTET STRING

Hh3cVLANMibSwitchCountEntry
SEQUENCE
	hh3cVLANMibSwitchGMRPRXPkt	Counter32
	hh3cVLANMibSwitchGVRPRXPkt	Counter32
	hh3cVLANMibSwitchGMRPTXPkt	Counter32
	hh3cVLANMibSwitchGVRPTXPkt	Counter32
	hh3cVLANMibSwitchDiscardedPkt	Counter32
	hh3cVLANMibSwitchGarpStatClear	INTEGER

Hh3cVLANMibHoldTimeEntry
SEQUENCE
	hh3cVLANMibHoldTime	INTEGER

Defined Values

hh3cLswVlan		1.3.6.1.4.1.25506.8.35.2
Tok_String
MODULE-IDENTITY

hh3cLswVlanMngObject		1.3.6.1.4.1.25506.8.35.2.1
Description.
Status: current	Access: read-write
OBJECT-IDENTITY

hh3cdot1qVlanMIBTable		1.3.6.1.4.1.25506.8.35.2.1.1
VLAN MIB table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cDot1qVlanMIBEntry

hh3cdot1qVlanMIBEntry		1.3.6.1.4.1.25506.8.35.2.1.1.1
Entries of VLAN MIB table
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cDot1qVlanMIBEntry

hh3cdot1qVlanIndex		1.3.6.1.4.1.25506.8.35.2.1.1.1.1
The VLAN-ID.
Status: current	Access: read-only
OBJECT-TYPE
	Hh3cVlanIndex

hh3cdot1qVlanName		1.3.6.1.4.1.25506.8.35.2.1.1.1.2
Name of the VLAN.
Status: current	Access: read-write
OBJECT-TYPE
	SnmpAdminString	Size(0..32)

hh3cdot1qVlanPorts		1.3.6.1.4.1.25506.8.35.2.1.1.1.3
Port list of the VLAN.
Status: current	Access: read-write
OBJECT-TYPE
	PortList

hh3cdot1qVlanType		1.3.6.1.4.1.25506.8.35.2.1.1.1.4
Vlan types: SuperVlan(1), Common vlan(2), and Sub-vlan(3).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	superVlan(1), common-vlan(2), sub-vlan(3), isolate-user-vlan(4), secondary-vlan(5), primaryVlan(6)

hh3cdot1qVlanMacFilter		1.3.6.1.4.1.25506.8.35.2.1.1.1.5
Whether to filter MAC addresses.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hh3cdot1qVlanMcastUnknownProtos		1.3.6.1.4.1.25506.8.35.2.1.1.1.6
Whether to broadcast the unknown packets.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hh3cExistInterface		1.3.6.1.4.1.25506.8.35.2.1.1.1.7
Whether there is virtual interface.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hh3cVlanInterfaceIndex		1.3.6.1.4.1.25506.8.35.2.1.1.1.8
Whether vlan interface is configured on vlan. If vlan interface is configured, the value of the node is vlan id, else the value is 0.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hh3cdot1qVlanMacLearn		1.3.6.1.4.1.25506.8.35.2.1.1.1.9
MAC address learning identity. (common vlan/Sub-vlan)
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hh3cdot1qVlanStatus		1.3.6.1.4.1.25506.8.35.2.1.1.1.10
Status of the VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), static(2), dynamic(3)

hh3cdot1qVlanCreationTime		1.3.6.1.4.1.25506.8.35.2.1.1.1.11
The sysUPTime when the VLAN is created.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

hh3cdot1qVlanPriority		1.3.6.1.4.1.25506.8.35.2.1.1.1.12
Priority of the VLAN.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..7

hh3cdot1qVlanRowStatus		1.3.6.1.4.1.25506.8.35.2.1.1.1.13
Operation status.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hh3cdot1qVlanBroadcastSuppression		1.3.6.1.4.1.25506.8.35.2.1.1.1.14
Whether broadcast suppression of vlan be supported pro rata. The vlaue of 100 indicates no broadcast suppression. If the function is not supported, this object cannot be written, and 100 will be returned when reading
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

hh3cdot1qVlanBcastSuppressionPPS		1.3.6.1.4.1.25506.8.35.2.1.1.1.15
If the broadcast can be controlled with pps(packet per second)type, the value of 0 indicates no suppression. This node is conflicted with hh3cdot1qVlanBroadcastSuppression. If the mode is set, hh3cdot1qVlanBroadcastSuppression is unavailable. And vice versa.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..148800

hh3cdot1qVlanMulticast		1.3.6.1.4.1.25506.8.35.2.1.1.1.16
Multicast vlan. The default value is disable(0).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

hh3cdot1qVlanTaggedPorts		1.3.6.1.4.1.25506.8.35.2.1.1.1.17
Tagged port list of the VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	PortList

hh3cdot1qVlanUntaggedPorts		1.3.6.1.4.1.25506.8.35.2.1.1.1.18
Untagged port list of the VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	PortList

hh3cdot1qVlanPortIndexs		1.3.6.1.4.1.25506.8.35.2.1.1.1.19
PortIndex list of the VLAN, that delimited by comma, such as 1,3,4,7.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

hh3cVlanInterfaceTable		1.3.6.1.4.1.25506.8.35.2.1.2
Virtual interface configuration table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cVlanInterfaceEntry

hh3cVlanInterfaceEntry		1.3.6.1.4.1.25506.8.35.2.1.2.1
Entries of virtual interface configuration table
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cVlanInterfaceEntry

hh3cVlanInterfaceID		1.3.6.1.4.1.25506.8.35.2.1.2.1.1
Index of the vlan interface table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hh3cdot1qVlanID		1.3.6.1.4.1.25506.8.35.2.1.2.1.2
VLAN-ID
Status: current	Access: read-only
OBJECT-TYPE
	Hh3cVlanIndex

hh3cdot1qVlanIpAddress		1.3.6.1.4.1.25506.8.35.2.1.2.1.3
IP address of interface.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hh3cdot1qVlanIpAddressMask		1.3.6.1.4.1.25506.8.35.2.1.2.1.4
IP address mask of interface.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hh3cVlanInterfaceAdminStatus		1.3.6.1.4.1.25506.8.35.2.1.2.1.5
Status of VLAN virtual interfaces.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	up(1), down(2)

hh3cVlanInterfaceFrameType		1.3.6.1.4.1.25506.8.35.2.1.2.1.6
Frame type accepted by VLAN virtual interfaces.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ethernet-ii(1), ethernet-snap(2), ethernet-8022(3), ethernet-8023(4)

hh3cInterfaceRowStatus		1.3.6.1.4.1.25506.8.35.2.1.2.1.7
Operation status.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hh3cVlanInterfaceIpMethod		1.3.6.1.4.1.25506.8.35.2.1.2.1.8
Vlan interface ip address acquiring method which is manual, dhcp or bootp.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	assigned-ip(1), dhcp-ip(2), bootp-ip(3)

hh3cVlanInterfaceIfIndex		1.3.6.1.4.1.25506.8.35.2.1.2.1.9
IfIndex of VLAN interface.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hh3cifIsolateMappingTable		1.3.6.1.4.1.25506.8.35.2.1.4
Secondary vlan lists of Isolate-VLANs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cifIsolateMappingEntry

hh3cifIsolateMappingEntry		1.3.6.1.4.1.25506.8.35.2.1.4.1
Secondary vlan lists of Isolate-VLANs.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cifIsolateMappingEntry

hh3cifIsolatePrimaryVlanID		1.3.6.1.4.1.25506.8.35.2.1.4.1.1
Primary VLAN-ID.
Status: current	Access: read-only
OBJECT-TYPE
	Hh3cVlanIndex

hh3cifIsolateSecondaryVlanlistLow		1.3.6.1.4.1.25506.8.35.2.1.4.1.2
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hh3cifIsolateSecondaryVlanlistHigh		1.3.6.1.4.1.25506.8.35.2.1.4.1.3
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hh3cVlanInterfaceAddrTable		1.3.6.1.4.1.25506.8.35.2.1.5
VLAN interface IP address configuration table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cVlanInterfaceAddrEntry

hh3cVlanInterfaceAddrEntry		1.3.6.1.4.1.25506.8.35.2.1.5.1
Entries of VLAN interface IP address configuration table
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cVlanInterfaceAddrEntry

hh3cVlanInterfaceIpIfIndex		1.3.6.1.4.1.25506.8.35.2.1.5.1.1
Index of VLAN interfaces.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hh3cVlanInterfaceIpAddr		1.3.6.1.4.1.25506.8.35.2.1.5.1.2
IP address of VLAN interface.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hh3cVlanInterfaceIpMask		1.3.6.1.4.1.25506.8.35.2.1.5.1.3
IP address mask of VLAN interface. When destory single IP address, you must set it correct to relative IP address.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

hh3cVlanInterfaceIpType		1.3.6.1.4.1.25506.8.35.2.1.5.1.4
IP address type.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	primary(1), sub(2), cluster(3), vrrp(4)

hh3cVlanInterfaceIpRowStatus		1.3.6.1.4.1.25506.8.35.2.1.5.1.5
Operation status. active(1) will only be set when taking GET or GET NEXT operation. createAndGo(4) and destory(6) is valid when taking SET operation.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hh3cDot1qVlanBatchMIBTable		1.3.6.1.4.1.25506.8.35.2.1.6
VLAN batch configuration table. In the case of VLAN batch creation, hh3cdot1qVlanBatchSetOperate should be set to 1. For example, if creating a row is for creating VLANs 2 to 4, the value of the objects should be set as follows: hh3cdot1qVlanBatchStartIndex 2, hh3cdot1qVlanBatchEndIndex 4, hh3cdot1qVlanBatchSetOperate create(1), hh3cdot1qVlanBatchRowStatus createAndGo(4). In the case of VLAN batch deletion, hh3cdot1qVlanBatchSetOperate should be set to 2. For example, if creating a row is for deleting VLANs 10 to 20, the value of the objects should be set as follows: hh3cdot1qVlanBatchStartIndex 10, hh3cdot1qVlanBatchEndIndex 20, hh3cdot1qVlanBatchSetOperate delete(2), hh3cdot1qVlanBatchRowStatus createAndGo(4). When the action of batch VLANs deleting or creating is done, one row will be existent until it is deleted manually or ages out, but the VLANs of it won't disappear with the deletion of the row.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cDot1qVlanBatchMIBEntry

hh3cDot1qVlanBatchMIBEntry		1.3.6.1.4.1.25506.8.35.2.1.6.1
VLAN batch configuration entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cDot1qVlanBatchMIBEntry

hh3cdot1qVlanBatchOperIndex		1.3.6.1.4.1.25506.8.35.2.1.6.1.1
The consequence of operation.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cdot1qVlanBatchStartIndex		1.3.6.1.4.1.25506.8.35.2.1.6.1.2
The value of start VLAN-ID.
Status: current	Access: read-write
OBJECT-TYPE
	Hh3cVlanIndex

hh3cdot1qVlanBatchEndIndex		1.3.6.1.4.1.25506.8.35.2.1.6.1.3
The value of end VLAN-ID.
Status: current	Access: read-write
OBJECT-TYPE
	Hh3cVlanIndex

hh3cdot1qVlanBatchOperStatus		1.3.6.1.4.1.25506.8.35.2.1.6.1.4
The status of operation.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	opInprogress(1), opfailure(2), opsuccess(3), opsuccesspartial(4)

hh3cdot1qVlanBatchRowStatus		1.3.6.1.4.1.25506.8.35.2.1.6.1.5
The row status of Hh3cDot1qVlanBatchMIBEntry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hh3cdot1qVlanBatchSetOperate		1.3.6.1.4.1.25506.8.35.2.1.6.1.6
VLAN batch creation or deletion.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	create(1), delete(2)

hh3cifSuperVlanMappingTable		1.3.6.1.4.1.25506.8.35.2.1.7
Sub VLAN lists of super-VLANs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cifSuperVlanMappingEntry

hh3cifSuperVlanMappingEntry		1.3.6.1.4.1.25506.8.35.2.1.7.1
Sub VLAN lists of super-VLANs.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cifSuperVlanMappingEntry

hh3cifSuperVlanID		1.3.6.1.4.1.25506.8.35.2.1.7.1.1
Super VLAN ID.
Status: current	Access: read-only
OBJECT-TYPE
	Hh3cVlanIndex

hh3cifSubVlanlistLow		1.3.6.1.4.1.25506.8.35.2.1.7.1.2
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hh3cifSubVlanlistHigh		1.3.6.1.4.1.25506.8.35.2.1.7.1.3
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hh3cPrivateVlanMappingTable		1.3.6.1.4.1.25506.8.35.2.1.8
Secondary vlan lists of Primary-VLANs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cPrivateVlanMappingEntry

hh3cPrivateVlanMappingEntry		1.3.6.1.4.1.25506.8.35.2.1.8.1
Secondary vlan lists of Primary-VLANs.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cPrivateVlanMappingEntry

hh3cPrimaryVlanID		1.3.6.1.4.1.25506.8.35.2.1.8.1.1
Primary VLAN-ID.
Status: current	Access: read-only
OBJECT-TYPE
	Hh3cVlanIndex

hh3cSecondaryVlanlistLow		1.3.6.1.4.1.25506.8.35.2.1.8.1.2
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hh3cSecondaryVlanlistHigh		1.3.6.1.4.1.25506.8.35.2.1.8.1.3
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hh3cLswVlanProtoObject		1.3.6.1.4.1.25506.8.35.2.2
Description.
Status: current	Access: read-write
OBJECT-IDENTITY

hh3cVLANMibGarpLeaveAllTime		1.3.6.1.4.1.25506.8.35.2.2.14
The GARP LeaveAll time, in centiseconds.
Status: current	Access: read-write
OBJECT-TYPE
	TimeInterval

hh3cvLANMibSwitchCountTable		1.3.6.1.4.1.25506.8.35.2.2.15
A table containing the information various statistics of switch.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cVLANMibSwitchCountEntry

hh3cvLANMibSwitchCountEntry		1.3.6.1.4.1.25506.8.35.2.2.15.1
A table containing the information various statistics of switch.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cVLANMibSwitchCountEntry

hh3cVLANMibSwitchGMRPRXPkt		1.3.6.1.4.1.25506.8.35.2.2.15.1.1
Number of GMRP frames received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hh3cVLANMibSwitchGVRPRXPkt		1.3.6.1.4.1.25506.8.35.2.2.15.1.2
Number of GVRP frames received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hh3cVLANMibSwitchGMRPTXPkt		1.3.6.1.4.1.25506.8.35.2.2.15.1.3
Number of GMRP frames transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hh3cVLANMibSwitchGVRPTXPkt		1.3.6.1.4.1.25506.8.35.2.2.15.1.4
Number of GVRP frames transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hh3cVLANMibSwitchDiscardedPkt		1.3.6.1.4.1.25506.8.35.2.2.15.1.5
Number of discarded frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hh3cVLANMibSwitchGarpStatClear		1.3.6.1.4.1.25506.8.35.2.2.15.1.6
Clear various Statistics viz. read operation not supported.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1)

hh3cvLANMibHoldTimeTable		1.3.6.1.4.1.25506.8.35.2.2.16
A table for setting/getting the Hold Time for a particular port.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cVLANMibHoldTimeEntry

hh3cvLANMibHoldTimeEntry		1.3.6.1.4.1.25506.8.35.2.2.16.1
A table for setting/getting the HoldTime of the port.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cVLANMibHoldTimeEntry

hh3cVLANMibHoldTime		1.3.6.1.4.1.25506.8.35.2.2.16.1.1
HoldTime of the port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	10..32765