HH3C-QOS-PROFILE-MIB

File: HH3C-QOS-PROFILE-MIB.mib (48199 bytes)

Imported modules

HH3C-OID-MIB	SNMPv2-CONF	SNMPv2-SMI
SNMPv2-TC

Imported symbols

hh3cCommon	OBJECT-GROUP	MODULE-COMPLIANCE
NOTIFICATION-GROUP	IpAddress	OBJECT-TYPE
MODULE-IDENTITY	NOTIFICATION-TYPE	Integer32
RowStatus	TruthValue	MacAddress
TEXTUAL-CONVENTION

Defined Types

Hh3cQoSDirection
Description.
TEXTUAL-CONVENTION
	INTEGER	invalid(0), input(1), ouput(2)

Hh3cQoSProfEntry
SEQUENCE
	hh3cQoSProfIndex	Integer32
	hh3cQoSProfName	OCTET STRING
	hh3cQoSProfActionNumber	Integer32
	hh3cQoSProfRowStatus	RowStatus

Hh3cQoSTrafficLimitEntry
SEQUENCE
	hh3cQoSTrafLmtProfIndex	Integer32
	hh3cQoSTrafLmtActionIndex	Integer32
	hh3cQoSTrafLmtDirection	Hh3cQoSDirection
	hh3cQoSTrafLmtUserAclNum	Integer32
	hh3cQoSTrafLmtUserAclRule	Integer32
	hh3cQoSTrafLmtIpAclNum	Integer32
	hh3cQoSTrafLmtIpAclRule	Integer32
	hh3cQoSTrafLmtLinkAclNum	Integer32
	hh3cQoSTrafLmtLinkAclRule	Integer32
	hh3cQoSTrafLmtTargetRateMbps	Integer32
	hh3cQoSTrafLmtTargetRateKbps	Integer32
	hh3cQoSTrafLmtPeakRate	Integer32
	hh3cQoSTrafLmtCIR	Integer32
	hh3cQoSTrafLmtCBS	Integer32
	hh3cQoSTrafLmtEBS	Integer32
	hh3cQoSTrafLmtPIR	Integer32
	hh3cQoSTrafLmtConformLocalPre	Integer32
	hh3cQoSTrafLmtConformActionType	INTEGER
	hh3cQoSTrafLmtExceedActionType	INTEGER
	hh3cQoSTrafLmtExceedDscp	Integer32
	hh3cQoSTrafLmtExceedCos	Integer32
	hh3cQoSTrafLmtRowStatus	RowStatus
	hh3cQoSTrafLmtConformCos	Integer32
	hh3cQoSTrafLmtConformDscp	Integer32

Hh3cQoSTrafficPriorityEntry
SEQUENCE
	hh3cQoSTrafPrioProfIndex	Integer32
	hh3cQoSTrafPrioActionIndex	Integer32
	hh3cQoSTrafPrioDirection	Hh3cQoSDirection
	hh3cQoSTrafPrioUserAclNum	Integer32
	hh3cQoSTrafPrioUserAclRule	Integer32
	hh3cQoSTrafPrioIpAclNum	Integer32
	hh3cQoSTrafPrioIpAclRule	Integer32
	hh3cQoSTrafPrioLinkAclNum	Integer32
	hh3cQoSTrafPrioLinkAclRule	Integer32
	hh3cQoSTrafPrioDscp	Integer32
	hh3cQoSTrafPrioIpPre	Integer32
	hh3cQoSTrafPrioIpPreFromCos	TruthValue
	hh3cQoSTrafPrioCos	Integer32
	hh3cQoSTrafPrioCosFromIpPre	TruthValue
	hh3cQoSTrafPrioLocalPre	Integer32
	hh3cQoSTrafPrioPolicedServiceType	INTEGER
	hh3cQoSTrafPrioPolicedServiceDscp	Integer32
	hh3cQoSTrafPrioPolicedServiceExp	Integer32
	hh3cQoSTrafPrioPolicedServiceCos	Integer32
	hh3cQoSTrafPrioPolicedServiceLoaclPre	Integer32
	hh3cQoSTrafPrioPolicedServiceDropPriority	Integer32
	hh3cQoSTrafPrioRowStatus	RowStatus

Hh3cQoSTrafficFilterEntry
SEQUENCE
	hh3cQoSTrafFilterProfIndex	Integer32
	hh3cQoSTrafFilterActionIndex	Integer32
	hh3cQoSTrafFilterDirection	Hh3cQoSDirection
	hh3cQoSTrafFilterUserAclNum	Integer32
	hh3cQoSTrafFilterUserAclRule	Integer32
	hh3cQoSTrafFilterIpAclNum	Integer32
	hh3cQoSTrafFilterIpAclRule	Integer32
	hh3cQoSTrafFilterLinkAclNum	Integer32
	hh3cQoSTrafFilterLinkAclRule	Integer32
	hh3cQoSTrafFilterRowStatus	RowStatus

Hh3cQoSProfPortMappingEntry
SEQUENCE
	hh3cQoSProfPortMappingIfIndex	Integer32
	hh3cQoSProfPortMappingProfIndex	Integer32
	hh3cQoSProfPortMappingRowStatus	RowStatus

Hh3cQoSProfPortMappingModeEntry
SEQUENCE
	hh3cQoSProfPortMappingModeIfIndex	Integer32
	hh3cQoSProfPortMappingMode	INTEGER

Hh3cQoSProfDynPortMappingEntry
SEQUENCE
	hh3cQoSProfDynPortMappingIfIndex	Integer32
	hh3cQoSProfDynPortMappingUserSrcMAC	MacAddress
	hh3cQoSProfDynPortMappingUserName	OCTET STRING
	hh3cQoSProfDynPortMappingUserIPAddr	IpAddress
	hh3cQoSProfDynPortMappingUserVLANID	Integer32
	hh3cQoSProfDynPortMappingUserProfName	OCTET STRING

Defined Values

hh3cQosProfile		1.3.6.1.4.1.25506.2.17
The private MIB file includes the general information QoS profile.
MODULE-IDENTITY

hh3cQoSProfObjects		1.3.6.1.4.1.25506.2.17.1
OBJECT IDENTIFIER

hh3cQoSProf		1.3.6.1.4.1.25506.2.17.1.1
OBJECT IDENTIFIER

hh3cQoSProfTable		1.3.6.1.4.1.25506.2.17.1.1.1
QoS profile table is used to config the qos profiles.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cQoSProfEntry

hh3cQoSProfEntry		1.3.6.1.4.1.25506.2.17.1.1.1.1

Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cQoSProfEntry

hh3cQoSProfIndex		1.3.6.1.4.1.25506.2.17.1.1.1.1.1
QoS profile table index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

hh3cQoSProfName		1.3.6.1.4.1.25506.2.17.1.1.1.1.2
QoS profile name.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..32)

hh3cQoSProfActionNumber		1.3.6.1.4.1.25506.2.17.1.1.1.1.3
Total number of actions of a QoS profile.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

hh3cQoSProfRowStatus		1.3.6.1.4.1.25506.2.17.1.1.1.1.4
RowStatus,Now support three state:CreateAndGo,Active,Destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hh3cQoSAction		1.3.6.1.4.1.25506.2.17.1.2
OBJECT IDENTIFIER

hh3cQoSTrafficLimitTable		1.3.6.1.4.1.25506.2.17.1.2.1
Traffic limit table is used to set the average rate or peak rate of the flow. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cQoSTrafficLimitEntry

hh3cQoSTrafficLimitEntry		1.3.6.1.4.1.25506.2.17.1.2.1.1

Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cQoSTrafficLimitEntry

hh3cQoSTrafLmtProfIndex		1.3.6.1.4.1.25506.2.17.1.2.1.1.1
The index of QoS profile which the traffic-limit action belongs to.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

hh3cQoSTrafLmtActionIndex		1.3.6.1.4.1.25506.2.17.1.2.1.1.2
The index of traffic-limit action.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

hh3cQoSTrafLmtDirection		1.3.6.1.4.1.25506.2.17.1.2.1.1.3
The direction of traffic-limit action.
Status: current	Access: read-create
OBJECT-TYPE
	Hh3cQoSDirection

hh3cQoSTrafLmtUserAclNum		1.3.6.1.4.1.25506.2.17.1.2.1.1.4
The number of user-based acl group.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0 \| 5000..5999

hh3cQoSTrafLmtUserAclRule		1.3.6.1.4.1.25506.2.17.1.2.1.1.5
The subitem of user-based acl rule.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hh3cQoSTrafLmtIpAclNum		1.3.6.1.4.1.25506.2.17.1.2.1.1.6
The number of Ip-based acl group.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0 \| 2000..3999

hh3cQoSTrafLmtIpAclRule		1.3.6.1.4.1.25506.2.17.1.2.1.1.7
The subitem of IP-based acl rule.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hh3cQoSTrafLmtLinkAclNum		1.3.6.1.4.1.25506.2.17.1.2.1.1.8
The number of Link-based acl group
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0 \| 4000..4999

hh3cQoSTrafLmtLinkAclRule		1.3.6.1.4.1.25506.2.17.1.2.1.1.9
The subitem of Link-based acl rule.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hh3cQoSTrafLmtTargetRateMbps		1.3.6.1.4.1.25506.2.17.1.2.1.1.10
Target rate:Mbps Some products only support Mbps,but others support Kbps,so Kbps and Mbps should be supportted mutually exclusively on the same product.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

hh3cQoSTrafLmtTargetRateKbps		1.3.6.1.4.1.25506.2.17.1.2.1.1.11
Target rate:Kbps. Some products only support Kbps,but others support Mbps,so Kbps and Mbps should be supportted mutually exclusively on the same product.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000000

hh3cQoSTrafLmtPeakRate		1.3.6.1.4.1.25506.2.17.1.2.1.1.12
Peak rate
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0 \| 64..8388608

hh3cQoSTrafLmtCIR		1.3.6.1.4.1.25506.2.17.1.2.1.1.13
Committed Information Rate. unit:kbps.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..34120000

hh3cQoSTrafLmtCBS		1.3.6.1.4.1.25506.2.17.1.2.1.1.14
Committed Burst Size. unit:byte.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..1048575

hh3cQoSTrafLmtEBS		1.3.6.1.4.1.25506.2.17.1.2.1.1.15
Excess Burst Size. unit:byte.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..268435455

hh3cQoSTrafLmtPIR		1.3.6.1.4.1.25506.2.17.1.2.1.1.16
Peak Information Rate. unit:kbps.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..34120000

hh3cQoSTrafLmtConformLocalPre		1.3.6.1.4.1.25506.2.17.1.2.1.1.17
The local precedence of conformed flow.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hh3cQoSTrafLmtConformActionType		1.3.6.1.4.1.25506.2.17.1.2.1.1.18
The action type of conformed flow.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	invalid(0), remark-cos(1), remark-drop-priority(2), remark-cos-drop-priority(3), remark-policed-service(4), remark-dscp(5)

hh3cQoSTrafLmtExceedActionType		1.3.6.1.4.1.25506.2.17.1.2.1.1.19
The action type of non-conformed flow.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	invalid(0), forward(1), drop(2), remarkdscp(3), exceed-cos(4)

hh3cQoSTrafLmtExceedDscp		1.3.6.1.4.1.25506.2.17.1.2.1.1.20
The remarked DSCP value of non-conformed flow. DSCP 255 is used as default value and for get/get-next operation of this node. If the user does not set exceeding action as remarking DSCP, then value 255 is returned for get/get-next operation.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..63 \| 255

hh3cQoSTrafLmtExceedCos		1.3.6.1.4.1.25506.2.17.1.2.1.1.21
The remarked COS value of non-conformed flow. COS 255 is used as default value and for get/get-next operation of this node. If the user does not set exceeding action as remarking COS, then value 255 is returned for get/get-next operation.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7 \| 255

hh3cQoSTrafLmtRowStatus		1.3.6.1.4.1.25506.2.17.1.2.1.1.22
RowStatus,Now support three state:CreateAndGo,Active,Destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hh3cQoSTrafLmtConformCos		1.3.6.1.4.1.25506.2.17.1.2.1.1.23
If the user chooses remark-cos value of the hh3cQoSTrafLmtConformActionType, this object can be used to set the conform cos value. There are some enumerations as follows: best-effort Specify best-effort priority(0) background Specify background priority(1) spare Specify spare priority(2) excellent-effort Specify excellent-effort priority(3) controlled-load Specify controlled-load priority(4) video Specify video priority(5) voice Specify voice priority(6) network-management Specify network-management priority(7) 255 indicates invalid value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7 \| 255

hh3cQoSTrafLmtConformDscp		1.3.6.1.4.1.25506.2.17.1.2.1.1.24
If the user chooses remark-dscp value of the hh3cQoSTrafLmtConformActionType, this object can be used to set the conform dscp value. There are some enumerations as follows: <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46) 255 indicates invalid value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..63 \| 255

hh3cQoSTrafficPriorityTable		1.3.6.1.4.1.25506.2.17.1.2.2
Traffic priority table is used to remark the IP-precedence, DSCP or COS priority of packets. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values. QOS policed service from DSCP mapping table is pre-defined in the hh3cDscpMapTable in the HH3C-LswQos-MIB. Policed service can decide what kind of QOS service the flow should get by the DSCP vlaue in the packets. Policed service includes remarking new DSCP,new EXP,new 802.1p priority,new local precedence and new drop priority.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cQoSTrafficPriorityEntry

hh3cQoSTrafficPriorityEntry		1.3.6.1.4.1.25506.2.17.1.2.2.1

Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cQoSTrafficPriorityEntry

hh3cQoSTrafPrioProfIndex		1.3.6.1.4.1.25506.2.17.1.2.2.1.1
The index of QoS profile which the traffic-priority action belongs to.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

hh3cQoSTrafPrioActionIndex		1.3.6.1.4.1.25506.2.17.1.2.2.1.2
The index of traffic-priority action.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

hh3cQoSTrafPrioDirection		1.3.6.1.4.1.25506.2.17.1.2.2.1.3
The direction of traffic-priority action.
Status: current	Access: read-create
OBJECT-TYPE
	Hh3cQoSDirection

hh3cQoSTrafPrioUserAclNum		1.3.6.1.4.1.25506.2.17.1.2.2.1.4
The number of user-based acl group.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0 \| 5000..5999

hh3cQoSTrafPrioUserAclRule		1.3.6.1.4.1.25506.2.17.1.2.2.1.5
The subitem of user-based acl rule.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hh3cQoSTrafPrioIpAclNum		1.3.6.1.4.1.25506.2.17.1.2.2.1.6
The number of Ip-based acl group.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0 \| 2000..3999

hh3cQoSTrafPrioIpAclRule		1.3.6.1.4.1.25506.2.17.1.2.2.1.7
The subitem of IP-based acl rule.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hh3cQoSTrafPrioLinkAclNum		1.3.6.1.4.1.25506.2.17.1.2.2.1.8
The number of Link-based acl group
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0 \| 4000..4999

hh3cQoSTrafPrioLinkAclRule		1.3.6.1.4.1.25506.2.17.1.2.2.1.9
The subitem of Link-based acl rule.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hh3cQoSTrafPrioDscp		1.3.6.1.4.1.25506.2.17.1.2.2.1.10
Set new DSCP value of specifed flow. DSCP 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking DSCP, then value 255 is returned for get/get-next operation.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..63 \| 255

hh3cQoSTrafPrioIpPre		1.3.6.1.4.1.25506.2.17.1.2.2.1.11
Set Ip precedence value of specifed flow. Ip precedence 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking Ip precedence, then value 255 is returned for get/get-next operation.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7 \| 255

hh3cQoSTrafPrioIpPreFromCos		1.3.6.1.4.1.25506.2.17.1.2.2.1.12
Set Ip precedence according to vlan priority. False(2)is used as default value and for get/get-next operation of this node. If the user does not set action as remarking Ip precedence from COS, then value 2 is returned for get/get-next operation.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hh3cQoSTrafPrioCos		1.3.6.1.4.1.25506.2.17.1.2.2.1.13
Set vlan priority of specifed flow. COS 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking COS, then value 255 is returned for get/get-next operation.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7 \| 255

hh3cQoSTrafPrioCosFromIpPre		1.3.6.1.4.1.25506.2.17.1.2.2.1.14
Set vlan priority according to IP precedence. False(2)is used as default value and for get/get-next operation of this node. If the user does not set action as remarking COS from Ip precedence, then value 2 is returned for get/get-next operation.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hh3cQoSTrafPrioLocalPre		1.3.6.1.4.1.25506.2.17.1.2.2.1.15
Set local precedence of specifed flow. Local precedence 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking local precedence, then value 255 is returned for get/get-next operation.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7 \| 255

hh3cQoSTrafPrioPolicedServiceType		1.3.6.1.4.1.25506.2.17.1.2.2.1.16
The service type of policed Priority. Policed Service is not allowed to be set with remarking DSCP,IpPrecedence,IpPrecedenceFromCOS,COS,COSFromIpPrecedence and LocalPrecedence action simultaneously on the same product. Policed service is user-predefined qos policy parameters. trust-dscp(2) means to decide new police service parameters by the DSCP value in the packets. new-dscp(3) means to decide new police service parameters by the new DSCP value set by the user. And a DSCP mapping table should be pre-defined in the hh3cDscpMapTable in the HH3C-LswQos-MIB. Untrusted(4) means to set all the new DSCP,EXP,COS,Local precedence and Drop priority by the user.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	invalid(0), trust-dscp(2), new-dscp(3), untrusted(4)

hh3cQoSTrafPrioPolicedServiceDscp		1.3.6.1.4.1.25506.2.17.1.2.2.1.17
The service Dscp of policed Priority
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..63 \| 255

hh3cQoSTrafPrioPolicedServiceExp		1.3.6.1.4.1.25506.2.17.1.2.2.1.18
The service Exp of policed Priority
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7 \| 255

hh3cQoSTrafPrioPolicedServiceCos		1.3.6.1.4.1.25506.2.17.1.2.2.1.19
The service cos of policed Priority
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7 \| 255

hh3cQoSTrafPrioPolicedServiceLoaclPre		1.3.6.1.4.1.25506.2.17.1.2.2.1.20
The service local pre of policed Priority
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7 \| 255

hh3cQoSTrafPrioPolicedServiceDropPriority		1.3.6.1.4.1.25506.2.17.1.2.2.1.21
The service drop priority of proliced Priority
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..2 \| 255

hh3cQoSTrafPrioRowStatus		1.3.6.1.4.1.25506.2.17.1.2.2.1.22
RowStatus,Now support three state:CreateAndGo,Active,Destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hh3cQoSTrafficFilterTable		1.3.6.1.4.1.25506.2.17.1.2.3
Traffic filter table is used to deny or permit packets. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values. To deny or permit packets,the ACL rules should be defined in hh3cAcl table. The 'deny' or 'permit' action should be defined with ACL rules. In this table,a predefined ACL rules can be referenced in a specified QOS profile group. 'Direction' means the ACL rules can be applied to the inbound or outbound packets.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cQoSTrafficFilterEntry

hh3cQoSTrafficFilterEntry		1.3.6.1.4.1.25506.2.17.1.2.3.1

Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cQoSTrafficFilterEntry

hh3cQoSTrafFilterProfIndex		1.3.6.1.4.1.25506.2.17.1.2.3.1.1
The index of QoS profile which the traffic-filter action belongs to.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

hh3cQoSTrafFilterActionIndex		1.3.6.1.4.1.25506.2.17.1.2.3.1.2
The index of traffic-filter action.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

hh3cQoSTrafFilterDirection		1.3.6.1.4.1.25506.2.17.1.2.3.1.3
The direction of traffic-filter action.
Status: current	Access: read-create
OBJECT-TYPE
	Hh3cQoSDirection

hh3cQoSTrafFilterUserAclNum		1.3.6.1.4.1.25506.2.17.1.2.3.1.4
The number of user-based acl group.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0 \| 5000..5999

hh3cQoSTrafFilterUserAclRule		1.3.6.1.4.1.25506.2.17.1.2.3.1.5
The subitem of user-based acl rule.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hh3cQoSTrafFilterIpAclNum		1.3.6.1.4.1.25506.2.17.1.2.3.1.6
The number of Ip-based acl group.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0 \| 2000..3999

hh3cQoSTrafFilterIpAclRule		1.3.6.1.4.1.25506.2.17.1.2.3.1.7
The subitem of IP-based acl rule.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hh3cQoSTrafFilterLinkAclNum		1.3.6.1.4.1.25506.2.17.1.2.3.1.8
The number of Link-based acl group
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0 \| 4000..4999

hh3cQoSTrafFilterLinkAclRule		1.3.6.1.4.1.25506.2.17.1.2.3.1.9
The subitem of Link-based acl rule.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hh3cQoSTrafFilterRowStatus		1.3.6.1.4.1.25506.2.17.1.2.3.1.10
RowStatus,Now support three state:CreateAndGo,Active,Destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hh3cQoSProfPortMapping		1.3.6.1.4.1.25506.2.17.1.3
OBJECT IDENTIFIER

hh3cQoSProfPortMappingTable		1.3.6.1.4.1.25506.2.17.1.3.1
Port mapping table is used to apply the qos profile to the port. If a qos profile is applied to the port, then the port will have an entry in the table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cQoSProfPortMappingEntry

hh3cQoSProfPortMappingEntry		1.3.6.1.4.1.25506.2.17.1.3.1.1

Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cQoSProfPortMappingEntry

hh3cQoSProfPortMappingIfIndex		1.3.6.1.4.1.25506.2.17.1.3.1.1.1
The ifindex which the specified QoS profile group is applied to.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

hh3cQoSProfPortMappingProfIndex		1.3.6.1.4.1.25506.2.17.1.3.1.1.2
The index of specified QoS profile group.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

hh3cQoSProfPortMappingRowStatus		1.3.6.1.4.1.25506.2.17.1.3.1.1.3
RowStatus,Now support three state:CreateAndGo,Active,Destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hh3cQoSProfPortMappingModeTable		1.3.6.1.4.1.25506.2.17.1.3.2
Port mapping mode table is used to set mapping mode of the port. When a qos profile is applied to a port, the profile can have two working ways: 1)The profile is the same for all the users connected to the port; 2)The profile can be different for different users connected to the port; Port-based mode means the profile is the same for all the users. User-based mode means the profile is different for different users. Default value is port-based.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cQoSProfPortMappingModeEntry

hh3cQoSProfPortMappingModeEntry		1.3.6.1.4.1.25506.2.17.1.3.2.1

Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cQoSProfPortMappingModeEntry

hh3cQoSProfPortMappingModeIfIndex		1.3.6.1.4.1.25506.2.17.1.3.2.1.1
The ifindex which the QoS profile mapping mode is applied to.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

hh3cQoSProfPortMappingMode		1.3.6.1.4.1.25506.2.17.1.3.2.1.2
The QoS profile mapping mode of specifed port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	user-based(1), port-based(2)

hh3cQoSProfDynPortMappingTable		1.3.6.1.4.1.25506.2.17.1.3.3
Dynamic port mapping table is used to get user' port,MAC address,IP address,VLAN ID and user-specified qos profiles. Network managers can allocate different QOS profile groups to different users. Once the user is on line, then the user-specified QOS profiles will be dynamically applied to the port the user connects. Each port can have different groups of users simultaneously connected. Each group of users can have assiociation with multiple QOS profiles simultaneously. So the user's port,MAC address,IP address and VLAN ID will replace the source information in the ACL rules refered in the QOS profiles. Once the user is off line, then the user-specified QOS profiles will be dynamically deleted from the port the user connects.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cQoSProfDynPortMappingEntry

hh3cQoSProfDynPortMappingEntry		1.3.6.1.4.1.25506.2.17.1.3.3.1

Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cQoSProfDynPortMappingEntry

hh3cQoSProfDynPortMappingIfIndex		1.3.6.1.4.1.25506.2.17.1.3.3.1.1
if index of the port user profile is applied.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

hh3cQoSProfDynPortMappingUserSrcMAC		1.3.6.1.4.1.25506.2.17.1.3.3.1.2
User sourc MAC address.
Status: current	Access: not-accessible
OBJECT-TYPE
	MacAddress

hh3cQoSProfDynPortMappingUserName		1.3.6.1.4.1.25506.2.17.1.3.3.1.3
User name.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

hh3cQoSProfDynPortMappingUserIPAddr		1.3.6.1.4.1.25506.2.17.1.3.3.1.4
User IP address
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hh3cQoSProfDynPortMappingUserVLANID		1.3.6.1.4.1.25506.2.17.1.3.3.1.5
User VLAN ID.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

hh3cQoSProfDynPortMappingUserProfName		1.3.6.1.4.1.25506.2.17.1.3.3.1.6
User profile name.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

hh3cQoSProfPortMappingTraps		1.3.6.1.4.1.25506.2.17.2
OBJECT IDENTIFIER

hh3cQoSProfPortMappingError		1.3.6.1.4.1.25506.2.17.2.1
An hh3cQoSProfPortMappingError notification is generated when a qos profile fails to be applied on the port.
Status: current	Access: read-only
NOTIFICATION-TYPE

hh3cQoSProfMibConformance		1.3.6.1.4.1.25506.2.17.3
OBJECT IDENTIFIER

hh3cQoSProfMibCompliances		1.3.6.1.4.1.25506.2.17.3.1
OBJECT IDENTIFIER

hh3cQoSProfMibCompliance		1.3.6.1.4.1.25506.2.17.3.1.1
The compliance statement for QoS Profile MIB.
Status: current	Access: read-only
MODULE-COMPLIANCE

hh3cQoSProfMibGroups		1.3.6.1.4.1.25506.2.17.3.2
OBJECT IDENTIFIER

hh3cQoSProfGroup		1.3.6.1.4.1.25506.2.17.3.2.1
Included table: hh3cQoSProfTable.
Status: current	Access: read-only
OBJECT-GROUP

hh3cQoSActionGroup		1.3.6.1.4.1.25506.2.17.3.2.2
Included table: 1)hh3cQoSTrafficLimitTable. 2)hh3cQoSTrafficPriorityTable. 3)hh3cQoSTrafficFilterTable
Status: current	Access: read-only
OBJECT-GROUP

hh3cQoSProfPortMappingGroup		1.3.6.1.4.1.25506.2.17.3.2.3
Included tables: 1)hh3cQoSProfPortMappingTable. 2)hh3cQoSProfPortMappingModeTable. 3)hh3cQoSProfDynPortMappingTable.
Status: current	Access: read-only
OBJECT-GROUP

hh3cQoSProfPortMappingTrapsGroup		1.3.6.1.4.1.25506.2.17.3.2.4
Included: hh3cQoSProfPortMappingTraps.
Status: current	Access: read-only
NOTIFICATION-GROUP