HH3C-VSAN-MIB

File: HH3C-VSAN-MIB.mib (23814 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC HH3C-FC-TC-MIB
IF-MIB HH3C-OID-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
Counter32 RowStatus TruthValue
Hh3cFcVsanIndex Hh3cFcNameIdOrZero Hh3cFcDomainPriority
Hh3cFcDomainId Hh3cFcNameId Hh3cFcDomainIdOrZero
Hh3cFcDmState Hh3cFcDomainIdList ifIndex
hh3cCommon

Defined Types

Hh3cVsanEntry  
SEQUENCE    
  hh3cVsanIndex Hh3cFcVsanIndex
  hh3cVsanCoreSwitchName Hh3cFcNameIdOrZero
  hh3cVsanRowStatus RowStatus

Hh3cVsanDmEntry  
SEQUENCE    
  hh3cVsanDmDomainConfigureEnable TruthValue
  hh3cVsanDmFabricNameConfigured Hh3cFcNameIdOrZero
  hh3cVsanDmPriorityConfigured Hh3cFcDomainPriority
  hh3cVsanDmAllowedDomainIdList Hh3cFcDomainIdList
  hh3cVsanDmDomainIdConfigured Hh3cFcDomainIdOrZero
  hh3cVsanDmDomainIdTypeConfigured INTEGER
  hh3cVsanDmAutoReconfigureEnable TruthValue
  hh3cVsanDmDomainRestart INTEGER
  hh3cVsanDmState Hh3cFcDmState
  hh3cVsanDmDomainIdAssigned Hh3cFcDomainIdOrZero
  hh3cVsanDmPrincipalSwitchWWN Hh3cFcNameId
  hh3cVsanDmLocalSwitchWWN Hh3cFcNameId
  hh3cVsanDmPrincipalSwRunPriority Hh3cFcDomainPriority
  hh3cVsanDmLocalSwRunPriority Hh3cFcDomainPriority
  hh3cVsanDmPrincipalSwSlctCnt Counter32
  hh3cVsanDmLocalPrincipalSwSlctCnt Counter32
  hh3cVsanDmBFCnt Counter32
  hh3cVsanDmRCFCnt Counter32

Hh3cVsanDmIfConfigEntry  
SEQUENCE    
  hh3cVsanDmIfConfigRcfReject TruthValue

Hh3cVsanDmDatabaseEntry  
SEQUENCE    
  hh3cVsanDmDatabaseDomainId Hh3cFcDomainId
  hh3cVsanDmDatabaseSwitchWWN Hh3cFcNameId

Hh3cVsanDmIfInfoEntry  
SEQUENCE    
  hh3cVsanDmIfInfoRole INTEGER

Defined Values

hh3cSan 1.3.6.1.4.1.25506.2.127
This MIB module is for configuring and monitoring VSAN and domain management related entities.
MODULE-IDENTITY    

hh3cVsan 1.3.6.1.4.1.25506.2.127.1
OBJECT IDENTIFIER    

hh3cVsanMibObjects 1.3.6.1.4.1.25506.2.127.1.1
OBJECT IDENTIFIER    

hh3cVsanDmConfiguration 1.3.6.1.4.1.25506.2.127.1.1.1
OBJECT IDENTIFIER    

hh3cVsanTable 1.3.6.1.4.1.25506.2.127.1.1.1.1
A table contains all the VSANs configured on the device. It can be used to manage and monitor the VSANs on local device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cVsanEntry

hh3cVsanEntry 1.3.6.1.4.1.25506.2.127.1.1.1.1.1
An entry that contains information about a VSAN in the hh3cVsanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cVsanEntry  

hh3cVsanIndex 1.3.6.1.4.1.25506.2.127.1.1.1.1.1.1
The identifier of the VSAN.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Hh3cFcVsanIndex  

hh3cVsanCoreSwitchName 1.3.6.1.4.1.25506.2.127.1.1.1.1.1.2
The Core Switch_Name of the VSAN, which is indicated by the switch's WWN(World Wide Name).
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cFcNameIdOrZero Size(8|16)  

hh3cVsanRowStatus 1.3.6.1.4.1.25506.2.127.1.1.1.1.1.3
RowStatus. Now only three states are supported: createAndGo, active, and destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cVsanDmTable 1.3.6.1.4.1.25506.2.127.1.1.1.2
A table contains domain management related configurations and information of VSANs. An entry in this table is created when corresponding VSAN is created, as well as deleted when the VSAN is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cVsanDmEntry

hh3cVsanDmEntry 1.3.6.1.4.1.25506.2.127.1.1.1.2.1
An entry of domain management related configurations and information of a specified VSAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cVsanDmEntry  

hh3cVsanDmDomainConfigureEnable 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.1
To enable or disable the fabric configuration function in this VSAN. true: enabled, the fabric will be built dynamically. false: disabled, the fabric should be built statically by manual configurations.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cVsanDmFabricNameConfigured 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.2
Specifies the fabric name in this VSAN, and will use a zero-length octet string as default value if not configured. The fabric name specified here takes effect only if the value of hh3cVsanDmDomainConfigureEnable is 'false', and the same fabric name should be configured for all switches in this VSAN. If the value of hh3cVsanDmDomainConfigureEnable is 'true', the principal switch WWN is used as fabric name. The value should be set to zero-length when canceling a configured fabric name.
Status: current Access: read-write
OBJECT-TYPE    
  Hh3cFcNameIdOrZero  

hh3cVsanDmPriorityConfigured 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.3
Specifies the priority of a switch in this VSAN, which is used during principal switch selection to cause one Switch to be favored over another.
Status: current Access: read-write
OBJECT-TYPE    
  Hh3cFcDomainPriority  

hh3cVsanDmAllowedDomainIdList 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.4
Specifies the list of domain IDs that are allowed in the VSAN, and the configuration has different meanings in different scenarios: 1. Principal switch: Can only assign domains IDs within the allowed domain ID list. If the allowed domain ID list configured does not include any of the already assigned domain IDs or manually configured domain IDs, the configuration will fail. 2. Non-principal switch: The manually configured domain ID must be within the allowed domain ID list, or the configuration will fail. Besides, the domain ID assigned by principal switch must within the allowed domain ID list, or the switch will refuse the assigned domain ID and isolate the upstream interface. If the runtime domain ID for a switch is beyond the new configured ID list, the configuration will fail. The default value is a zero-length octet string. If This value is set with zero-length, the configuration will be cancelled in this VSAN.
Status: current Access: read-write
OBJECT-TYPE    
  Hh3cFcDomainIdList  

hh3cVsanDmDomainIdConfigured 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.5
Used to configure or cancel a domain ID for a switch in this VSAN. When this value is not zero, the domain ID type should be specified together via hh3cVsanDmDomainIdTypeConfigured, or the default value of preferred type will be taken. The zero value is used to cancel the domain ID configured, and then, there is no need to specify its type. When statically build a fabric, the configured domain ID is the actual domain ID of the switch. If this object is not manually configured, the switch will isolate all of its E_ports in this VSAN no matter what domain ID type is configured. When dynamically build a fabric, the configured domain ID is desired by the switch, but the domain ID assigned to the switch may not be the desired one. If a non-principal switch fails to obtain any domain ID from the principal switch, the non-principal switch will isolate the upstream link. If a non-principal switch obtains a domain ID from the principal switch other than the desired one, different actions will be taken according to different domain ID type configured: - If configured static type, The non-principal switch will isolate the upstream link and refuse other domain IDs assigned by the principal switch. - If configured preferred type, the non-principal switch will use the domain ID assigned by the principal switch.
Status: current Access: read-write
OBJECT-TYPE    
  Hh3cFcDomainIdOrZero  

hh3cVsanDmDomainIdTypeConfigured 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.6
Specifies the type of configured domain ID, which can be static type or preferred type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER static(1), preferred(2)  

hh3cVsanDmAutoReconfigureEnable 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.7
Used to specify whether a disruptive reconfiguration will be automatically performed when the domain ID lists overlaps in fabric merging. The fabric reconfiguration function takes effect only when the value of hh3cVsanDmDomainConfigureEnable is 'true'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cVsanDmDomainRestart 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.8
Used to manually trigger a disruptive or non-disruptive reconfiguration of the fabric.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(1), nonDisruptive(2), disruptive(3)  

hh3cVsanDmState 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.9
Indicates the managing state of the domain in this VSAN.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cFcDmState  

hh3cVsanDmDomainIdAssigned 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.10
Indicates the Domain ID of the local switch in this VSAN or zero if no Domain ID has been assigned.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cFcDomainIdOrZero  

hh3cVsanDmPrincipalSwitchWWN 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.11
Indicates the WWN of the principal switch in this VSAN, or zero-length string if the identity of the principal switch is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cFcNameId  

hh3cVsanDmLocalSwitchWWN 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.12
Indicates the WWN of the local switch in this VSAN.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cFcNameId  

hh3cVsanDmPrincipalSwRunPriority 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.13
Indicates the running priority of the principal switch in this VSAN.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cFcDomainPriority  

hh3cVsanDmLocalSwRunPriority 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.14
Indicates the running priority of the local switch in this VSAN.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cFcDomainPriority  

hh3cVsanDmPrincipalSwSlctCnt 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.15
The times that local switch has participated in principal switch selection in this VSAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cVsanDmLocalPrincipalSwSlctCnt 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.16
The times that local switch was elected as principal switch in this VSAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cVsanDmBFCnt 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.17
The times that local switch has participated in a BF(Build Fabric) process in this VSAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cVsanDmRCFCnt 1.3.6.1.4.1.25506.2.127.1.1.1.2.1.18
The times that local switch has participated in a RCF (Reconfigure Fabric) process in this VSAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cVsanDmIfConfigTable 1.3.6.1.4.1.25506.2.127.1.1.1.3
A table contains the FC(Fibre Channel) related interface configurations about domain management of a VSAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cVsanDmIfConfigEntry

hh3cVsanDmIfConfigEntry 1.3.6.1.4.1.25506.2.127.1.1.1.3.1
An entry used for managing the FC related interface configurations about domain management of a VSAN. An entry can be created when any object in this table is set to non-default value, and be deleted when the objects in this table are set to default value.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cVsanDmIfConfigEntry  

hh3cVsanDmIfConfigRcfReject 1.3.6.1.4.1.25506.2.127.1.1.1.3.1.1
Used to specify whether the RCF(Reconfigure Fabric) requests received in this VSAN should be rejected. - true: the received RCF will be rejected. - false: the received RCF will be accepted.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cVsanDmInformation 1.3.6.1.4.1.25506.2.127.1.1.2
OBJECT IDENTIFIER    

hh3cVsanDmDatabaseTable 1.3.6.1.4.1.25506.2.127.1.1.2.1
A table specifies the information of the switch about all the Domain IDs which have been assigned in each of the VSANs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cVsanDmDatabaseEntry

hh3cVsanDmDatabaseEntry 1.3.6.1.4.1.25506.2.127.1.1.2.1.1
An object in the hh3cVsanDmDatabaseTable contains one Domain ID and the corresponding WWN of the switch in one VSAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cVsanDmDatabaseEntry  

hh3cVsanDmDatabaseDomainId 1.3.6.1.4.1.25506.2.127.1.1.2.1.1.1
The Domain ID which has been assigned.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cFcDomainId  

hh3cVsanDmDatabaseSwitchWWN 1.3.6.1.4.1.25506.2.127.1.1.2.1.1.2
The WWN of the switch to which the corresponding Domain ID has been assigned in the particular VSAN.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cFcNameId  

hh3cVsanDmIfInfoTable 1.3.6.1.4.1.25506.2.127.1.1.2.2
A table specifies the information of an interface in each of the VSANs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cVsanDmIfInfoEntry

hh3cVsanDmIfInfoEntry 1.3.6.1.4.1.25506.2.127.1.1.2.2.1
A conceptual row in the hh3cVsanDmIfInfoTable indicates the role information of the interface in the particular VSAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cVsanDmIfInfoEntry  

hh3cVsanDmIfInfoRole 1.3.6.1.4.1.25506.2.127.1.1.2.2.1.1
The role of the interface in the VSAN. The value specifications are listed as follows: nonPrincipal - The state of the interface is not principal interface in the VSAN. principalUpstream - The state of the interface is upstream principal interface in the VSAN. principalDownstream - The state of the interface is downstream principal interface in the VSAN. isolated - The state of the interface is isolated in the VSAN. unknown - The state of the interface is unknown in the VSAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonPrincipal(1), principalUpstream(2), principalDownstream(3), isolated(4), unknown(5)  

hh3cVsanDmNotifications 1.3.6.1.4.1.25506.2.127.1.1.3
OBJECT IDENTIFIER    

hh3cVsanDmNotificationPrefix 1.3.6.1.4.1.25506.2.127.1.1.3.0
OBJECT IDENTIFIER    

hh3cVsanDmDomainIdNotAssignedNotify 1.3.6.1.4.1.25506.2.127.1.1.3.0.1
This event will be triggered if a Domain ID is not assigned or configured, then the E_ports may be isolated in the VSAN. The conditions are listed as follows: 1. If the switch has enabled the fabric configuration and a request for a configured static Domain ID is rejected or no other Domain ID is assigned, the E_ports will be isolated in the particular VSAN. 2. If the switch does not enable the fabric configuration and a Domain ID is not configured, all of its E_ports will be isolated in the particular VSAN. The notification contains the WWN of the Switch and the index of the VSAN in which the event occurred.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cVsanDmNewPrincipalSwitchNotify 1.3.6.1.4.1.25506.2.127.1.1.3.0.2
If a switch becomes the new Principal Switch in a VSAN, this notification is sent immediately after the election. The notification contains the WWN of the new Principal Switch and the index of the VSAN in which the transition occurred.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cVsanDmFabricChangeNotify 1.3.6.1.4.1.25506.2.127.1.1.3.0.3
This event will be triggered if a switch sends or receives a Build Fabric (BF) or a Reconfigure Fabric (RCF) message in a VSAN. The conditions a switch can receive or send a BF or a RCF are listed as follows: 1. Two isolated fabrics in a VSAN merge into one fabric. If the Domain ID lists do not overlap, the sent or received message is BF, other cases, it is RCF. 2. If an upstream principal link which connects to principal switch and other switches become disconnected, the sent or received message is BF. 3. A BF or RCF process is triggered manually by configuration. The notification contains the index of the VSAN in which a BF or a RCF was sent or received.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cVsanDmDomainIdChangeNotify 1.3.6.1.4.1.25506.2.127.1.1.3.0.4
This event will be triggered if the Domain ID of the local switch changed in a VSAN.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cVsanDmNotificationSwitch 1.3.6.1.4.1.25506.2.127.1.1.3.1
OBJECT IDENTIFIER    

hh3cVsanDmFabricChangeNotifyEnable 1.3.6.1.4.1.25506.2.127.1.1.3.1.1
Specifies whether the hh3cVsanDmFabricChangeNotify can be sent when a BF or RCF message was sent or received by a switch.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cVsanDmDomainIdChangeNotifyEnable 1.3.6.1.4.1.25506.2.127.1.1.3.1.2
Specifies whether the hh3cVsanDmDomainIdChangeNotify can be sent when the Domain ID of the local switch changed in a VSAN.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue